Directorate Of Urban Local Bodies Tender

100 amp to 220 amp 415 V 10 KA 3 Phase

15 amp to 60 amp 415 V 10 KA 3 Phase

Pipe Laying. (HSR 31.21) Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Xiii) Galvanized iron pipe 50 mm dia on flushed.

(Q) Earthing (HSR 31.22). i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required.

ii) extra for using salt and charcoal/coke for pipe earth electrode as required.

viii) Supply and laying 25mm x 5mm G.I strip at 0.5 mtr. Below ground as strip earth electrode including soldering as required.

Supply and erection of underground cable, loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) (Make:- Havell’s, Grandlay & RR Cable (ISI Marked)). Xi) 16 Sq mm 4 Core Ard. Cable.

xii) 25 Sq. mm 4 core Cable.

Supply and erection of double walled corrugated (DWC ) HDPE pipe laid 1 meter below ground level including digging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of the labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work. (HSR 31.67). ii) HDPE pipe 90/75 mm outer dia/inner dia

Supply and erection of Hot Dip Gavanized octagonal pole 3 mm thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including coast of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/kit kat including cost of RCC 1:1:5:3 for foundation of sixe 0.7 m x 0.7m x 1.8m with minium 8 nos. 12 dia longitudinal MS reinforcement road with rings of 8 mm dia not mnore than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work. (HSR 31.68). make Philps/Baja/Crompton/Skipper/Surya 7 M long pole with top dia 70 mm and bottom dia 130 mm with base plat of size 220 x 220 x 12mm.

Non Schedule Items: Supply & Erection of single arms bracket made of 50mm dia GI pipe B class ISA 1.20 mtr. Long with coller pipe (GI) 75 mm dia 60cm long top covered with ornamental cap duly welded, painted 2 coasts of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-in-charge. Bracket duly erected on existing 7 mtr. High Octagonal pole.

S/E of LET Street Light 45 watts BRTFG highly efficient Multi LET with lend with pressure dia cast aluminum housing Reflector and enclosed with toughened glass I-65/66 (of make Havells/Philips/Crompton Complete upto entire satisfaction of engineer-in-charge of work.

Pedestal. (HSR 31.33) Supply and erection of Godrej Almeria type M.S. pedestal made of 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. Sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhand of 75 mm on all sides of pedestral, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof. The pedestal duly painted both inside and outside with two coasts of approved paints and primary coast and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- iv) M.S. pedestal of size 750 mm wide, 900 mm high, 300 mm deep and bottom totally open, duly embedded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster, having a base of size 1050 mm x 600 mm x 250 mm below ground level.

Supply and erection of 32/63 Amp. 3 Phase automatic time switch of L&T/C&S/Indo Asian make along with contractor of required capacity of L&T make movement controlled by preciosity quartz oscillation operation on main supply of continue to run on built in rechargeable nickel cadmium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

Pit for filling the Lying CWD HDEP Pipe/cable CC Road cut HSR 8.6(d)