Directorate Of Urban Local Bodies Tender

Cabin Desk Providing and Placing Cabin Table .Table Dimensions as mentioned below. Main Table - 1500 mmL x 700mm W x750mm Ht. Worktop shall be made up of 25mm thick prelaminated finish partical board of approved shade. The bottom shall have backing laminate. The Working and Nonworking edges shall be provided with hot pressed 2mm thick PVC edging using special hot melt glue at high temperature. Modesty panels is in 18mm thk prelaminated finish. Wire routing / wire management groumets shall be provided on main Table. Fliptop cover shall be provided on main table with cable tray below table to mount switches along with metal riser for verticle cable movement. Side Storage of size 900mm L x 450mm D x 680mm Ht is a combination of open shelves and hinged door unit and is made of 18mm thick prelaminated finish finish partical Board conforming to IS : 12823. All storage to be lockable with single key system. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco. The System should carry 3 Year Warranty.

Meeting Table Supplying and installation of meeting table of size : W1800mm x D700mm x H730 mm. Table top having thickness of 25mm, constructed of prelaminated particleboard covered with low pressure laminate (LPL). The understructure is made of MS powder coated egs. All the edges are provided with machine pressed 2 mm thick PVC edge band. Fliptop cover shall be provided on main table with wire management system is with Cable Trays running under the worktop to carry Data and Electrical wires and Switches and Sockets are to be fixed by customer on slots provided in Cable Trays. Cable Raisers are installed at junction points only where cables are entering the system from Floor into the cable Tray. All metal parts are duly powder coated. Fabric tackable screen to be provided between adjacent workstation above the table top with option of writing marker board. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco or equivalent.

Linear Workstations with screen Supplying and installation of Linear shaped workstation of size : W750mm x D600mm x H1050 mm. Main table is W750mm x D600mm x H730mm Table top having thickness of 25mm, constructed of prelaminated particleboard covered with low pressure laminate (LPL). The understructure is made of MS powder coated egs. All the edges are provided with machine pressed 2 mm thick PVC edge band. Fliptop cover shall be provided on main table with wire management system is with Cable Trays running under the worktop to carry Data and Electrical wires and Switches and Sockets are to be fixed by customer on slots provided in Cable Trays. Cable Raisers are installed at junction points only where cables are entering the system from Floor into the cable Tray. All metal parts are duly powder coated. Fabric tackable screen to be provided between adjacent workstation above the table top with option of writing marker board. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco or equivalent. Center screen of length 600mm on workstations in tackable fabrics with thickness of at least 20mm. Height of screen to be 300mm above table top