Directorate Of Urban Local Bodies Tender

Providing,designing and Fixing of Chest Press Chair Double Code 9124 of size 1800x700x2000mm fabricated with main post of 114 mm dia and 3mm thick and other pipes of 40mm dia 3mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120mm micron thick using Akzo Nobel or equipment in desired shade and colour. all welding joints of pipes shall be robotic welded with joint scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of version LLDPE plastic by rotational moulding with minimum 4mm thickness UV resident and colour as approved by engineer in charge. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed compony douly sealed and self lubricated to be approved by engineer in charge. Equipment to be fitted with in built limiters. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set Fixing the equipment on to it and cover nuts and bolts. the equipment should be koxtan in quality including GST and Installation charges

Supply and Erection of 1-HP Submersible Pump with Starter, copper wire (2.5 mm 3 core) including Bore and Pipes as per requirement of site to complete the work in all respect up to entire satisfaction of engineer-in- charge. (Make: - Crompton| Jindal| V-Guard |)

Push Hends or Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc..