Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Cwe/chm-12/2025-26 Spl Rep To Bldg No- P-116 At Chandimandir in Panchkula, Haryana, with an estimated contract value of Rs. 94,85,000. The bid opening date for this tender is 29-05-2025 and the last date for bid submission is 25-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 1,67,275Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Cwe/chm-12/2025-26 Spl Rep To Bldg No- P-116 At Chandimandir
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_711054_1Tender No
CWE/CHM-12/2025-26Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for Plain cement concrete 1:3:6, Type C-1 (using 20 mm graded stone aggregates) as in subbase floor complete all as specified and as directed by Engineer-in-Charge.
11.65
53
-
... More
Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part there of complete all as specified and as directed by Engineer-in-Charge.
150
10
-
... More
Demolition of brick tiles laid or bedded in cement mortar complete all as specified and as directed by Engineer-in-Charge.
90
11
-
... More
M&L for PCC 1:2:4, type B-0 (12.5 mm graded stone aggegate) 40mm thick average thick as in roof padding, complete all as specified and as directed by Engineer-in-Charge.
900
1
-
... More
M&L for Rendering 10 mm thick, finished even and fair on roof slab in cement mortar 1:4, using water proofing compound @ 3% by weight of cement complete all as specified and as directed by Engineer-in-Charge. Note :- (WPC will be measured and paid seperately)
949
-
-
... More
Supply only integral water proofing compound, ISI marked, complete all as specified and as directed by Engineer-in-Charge.
250
100
-
... More
M&L for APP based polymeric membrane minimum weight 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric laid over and including priming surfaces with primer of same manufacturer @ 0.400 Litre/Sqm and laying APP membrane on Primed surface by torch application and sealing all joints and overlapping min 10 cm, incl preparation of top surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
949
53
-
... More
Material and labour 40 mm thick brick tiles with including 20 mm thick cement mortar 1:4 jointed grouted and pointed complete mixed with crude oil 5% by weight of cement complete all as specified and as directed by Engineer-in-Charge.
900
10
-
... More
M&L for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement, wire brushing and claening the exposed steel reinforced bar, apply rust remover over the cleaned re-barsurface wash the re-bar with clean water for removing all rusts fromthe old re-barsurfaces, fixing of chicken wire mesh/new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40mm average thick in two coats, with and including polymer @10% by weight of cement, including erecting and dismantling steel scafoldingfor carrying out the work upto height of 12.0 mtr (Appx) complete all as specified and as directed by Engineer-in-Charge.
100
11
-
... More
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed by Engineer-in-Charge.
200
1
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
460
-
-
... More
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick cement mortar (1:4) screed bed for floor finishes complete all as specified and as directed by Engineer-in-Charge.
300
100
-
... More
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in skirting,etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick cement plaster (1:3) on vertical surfaces of brick work complete all as specified and as directed by Engineer-in-Charge.
25
53
-
... More
M&L for Glazed ceramic coloured tiles in vertical surfaces of size 350 x 250x 7mm /450mm x 350mm x7mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 for receiving the tiles complete all as specified and as directed by Engineer-in-Charge.
275
10
-
... More
M&l for non skid ceremic tiles 7 to 8mm thick square/ rectangular area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15 mm thick screed bedfor floor finishes in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
60
11
-
... More
Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.
33.5
1
-
... More
Materials and labour for 15-18 mm thick granite (of any type) work (table rubbedand polished) in steps, jambs, pillars, window-cills, urinal partitions, cooking plateformand like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.
25
100
-
... More
Providing edge moulding to 15-18 mm thick stone(any description) of counters vanities etc, including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed by Engineer-in-Charge.
36
53
-
... More
M&L for machine cut kota stone slab 18-20 mm thick (One piece for staircase/ landing) tread at stairs over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
260
10
-
... More
M&L for machine cut kota stone slab 18-20mm thick riser at stairs over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and finish complete over and including 10 mm thick screed bed in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.
50
11
-
... More
M&L for Grinding, rubbing and polishing by mechanical means to exiting kota stone/ marble and similar flooring at any position (like ;- floor, cooking platform/ staircase tread & riser/ landing) upto Granite finish complete all as specified and as directed by Engineer-in-Charge.
30
1
-
... More
Demolition of reinforced concrete such as roofs, floors, beams, staircase, landing, chajjas, facia and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed by Engineer-in-Charge.
1
-
-
... More
M&L for reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
1
100
-
... More
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200 mm thick (Horizontal or sloping) for rough finish surface of concrete complete all as specified and as directed by Engineer-in-Charge.
25
53
-
... More
M&L for mild steel TMT bars 10 mm dia & over, cut to length, bent to shape as required including cranking, bending specially for columns, hooking ends & binding with MS wire annealed not less than 0.9 mm dia welding as required at site complete all as specified and as directed by Engineer-in-Charge.
500
10
-
... More
M&L for mild steel TMT bars 5 mm dia and over upto 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed by Engineer-in-Charge.
20
11
-
... More
Demolition of brick work masonry, built in cement mortar including dismantling all quions, arches, pillars etc complete all as specified and as directed by Engineer-in-Charge.
15
1
-
... More
M&L for brick work with sub class 'B' bricks, straight/ curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
10
-
-
... More
All as per Serial Item no 31.00 above but except bricks.
3
100
-
... More
M&L for Brick work with sub class ‘B’ brick (old size bricks), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engineer-in-charge.
25
53
-
... More
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engineer-in-Charge.
580
10
-
... More
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:6 including finishing surface even and smooth without using extra cement at any height complete all as specified and as directed by Engineer-in-charge.
Note : Necessary scaffolding, safety precaution and other arrangement shall be arrenged by the contractor without any extra cost. Quoted rates against this item shall be inclusive of this aspect.
150
11
-
... More
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper white or tinted over a coat of primer complete all as specified and directed by Engineer-in-Charge.
150
1
-
... More
M&L for preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and as directed by Engineer-in-Charge.
5000
-
-
... More
Complete removal of existing treatment from internal/ external surfaces of building of any type viz white wash, distemper, cement base paint, external emulsion, texture finished exteriror paint etc with mechanical means including necessary scaffolding and safety arrangements, up to height of four storey building by using sand papering to make surface smooth and ready to receive exterior painting complete all as specified and as directed by Engineer-in-Charge.
300
100
-
... More
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 including finishing surface even and smooth without using extra cement at any height complete all as specified and as directed by Engineer-in-charge.
Note : Necessary scaffolding, safety precaution and other arrangement shall be arrenged by the contractor without any extra cost. Quoted rates against this item shall be inclusive of this aspect.
500
53
-
... More
Material & Labour for applying Two or more coats on new plastered surfaces of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm up to height of three storey building including necessary scafolding and safety arrangements complete all as specified and as directed by Engineer-in-Charge.
500
10
-
... More
M&L for Preparation of old decorated surfaces by removing spoiled paint/ scale dirt with wire brush or mechanical means/grinder including washing rubbing the surfaces and applying one coats of exterior emulsion paint to external surfaces of walls/ RCC surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony etc. up to height of four storey building including necessary scafolding and safety arrangements complete all as specified and as directed by Engineer-in-Charge. Make:- Asian - Apex/ British -Expa cool/ Berger- Weather coat smooth/ Nerolac(Excel)
7300
11
-
... More
Material & Labour for Rendering 5 mm thick cement plaster in CM 1:3 on brick or concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
100
1
-
... More
M&L for three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and as directed by Engineer-in-charge.
100
-
-
... More
Material and labour for one coat of white wash on old decorated ceiling surfaces including preparation of old surfaces complete all as specified and as directed by Engineer-in-charge.
800
100
-
... More
Complete removal of existing treatment and applying two coats of Oil bound Distemper emulsion paint, white or tinted over one coat of primer over 1.00 mm thick of wall putty as preparatory to distemper on surfaces of wall up to height of three storey building including necessary scafolding and safety arrangements complete all as specified and as directed by Engineer-in-charge.
1500
53
-
... More
Taking down chowkhats/ frames exceeding 1.5 Sqm but not exceeding 4 Sqm including shutters (without taking off shutters from the frames complete all as specified and as directed by Engineer-in-charge.
20
10
-
... More
Taking down chowkhats/ frames not exceeding 1.5 Sqm including shutters (without taking off shutters from the frames) including grill etc complete all as specified and as directed by Engineer-in-charge.
30
11
-
... More
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm complete all as specified and as directed by Engineer-in-charge.
15
1
-
... More
S&F factory made pressed steel frames having profile 125 mm x 60 mm for doors with one or more rebates made out/ fabricated out of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/ flat etc. and one shop coat of primer including filling of cement concrete 1:3:6 type C-1 in frame complete all as specified and as directed by Engineer-in-charge.
10
-
-
... More
S&F factory made pressed steel frames having profile 105 mm x 60 mm for doors with one or more rebates made out/ fabricated out of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/ flat etc. and one shop coat of primer including filling of cement concrete 1:3:6 type C-1 in frame complete all as specified and as directed by Engineer-in-charge.
10
100
-
... More
Supply and fixing factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer fixed including taking down old window and finished smooth and fair surface complete all as specified and as directed by Engineer-in-charge.
10
100
-
... More
Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer fixed including taking down old window and finished smooth and fair surface complete all as specified and as directed by Engineer-in-charge.
10
53
-
... More
S&F Factory made box type steel section ventilator with top/ centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150 mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer including taking down old ventilator and finishing the surface complete all as specified and as directed by Engineer-in-Charge.
Note : Glass/ Wire mesh required for fixing in ventilator will be measured and paid for separately.
10
10
-
... More
Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-charge.
965
11
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames including punching or drilling out glazing pins/spring clips complete all as specified and as directed by Engineer-in-charge.
35
1
-
... More
Supply and fixing 3 mm thick sheet glass ordinary quality, of size in square not exceeding 0.5 Sqm in each panes, fixed in any type of frame and glazing with oil putty (or beading) complete all as specified and as directed by Engineer-in-charge.
25
-
-
... More
Supply and fixing 3 mm thick figured glass, pin head type, ordinary quality, of size in square not exceeding 0.5 Sqm in each panes, fixed in any type of frame and glazing with oil putty (or beading) complete all as specified and as directed by Engineer-in-charge.
10
100
-
... More
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs, blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-charge.
200
53
-
... More
Material and labour Powder coated Gl frame work grid 605 x 605 mm for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 3mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40 mm long complete all as specified and as directed by Engineer-in-charge.
200
10
-
... More
Material and labour 4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and as directed by Engineer-in-charge.
200
11
-
... More
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
300
-
-
... More
Supply and fixing 4.80 mm thick ordinary quality tinted glass, fixed to aluminium frame work in panels not exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engineer-in-charge.
15
100
-
... More
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial trype both side complete all as specified and as directed by Engineer-in-charge.
40
53
-
... More
S&F 35 mm thick second class hard wood glazed and skelton shutters, open rebated, prepared to receive glass gauge etc, (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc.; size of members of shutters as specified in SSR Part-1, section 8, clause 8.24(a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-charge.
20
10
-
... More
S&F of Stainless Steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed Stainless Steel wire staples complete all as specified and as directed by Engineer-in-charge.
14
11
-
... More
S&F as in repair of Stainless Steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Stainless Steel wire staples complete all as specified and as directed by Engineer-in-charge.
15
1
-
... More
Refixing of shutters of size exc 1.00 sqm and not exceeding 2.00 sqm in the same opening including taking down and easing and adjusting complete all as specified and as directed by Engineer-in-charge.
10
-
-
... More
M&L for preperation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.
200
100
-
... More
S&F in repair factory made 18 mm thick solid WPC (wood polymer composite) board of density 650 kg/cum of one side prelaminated/ rigidlam with any colour and other side balancing lamination, as in cupboards/ kitchen/ cabinet shutter/ drawers etc fixed with screws, solvent cement, adhesive including dismantling old existing boardcomplete all as specified and as directed by Engineer-in-charge.
30
53
-
... More
S&F in repair solid WPC (wood polymer composite) board 25 mm thick interior grade, pre laminated one side, fixed with screws as in shutters of cup boards and kitchen cabinets, including dismantling old existing board complete all as specified and as directed by Engineer-in-charge.
30
10
-
... More
S&F in repairs continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, 40 mm width of flaps when opened complete all as specified and as directed by Engineer-in-charge.
120
11
-
... More
M&L preparation of new wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-charge.
100
1
-
... More
M&L for preparation of old steel surfaces of any desription over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
100
100
-
... More
M&L for preparation of old wooden surfaces of any desription over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
100
53
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)
100
10
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed by Engineer-in-charge.
30
11
-
... More
S&F 100 mm handles, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge.
100
1
-
... More
S&F handles, Extruded aluminium alloy handles, fabricated type, anodised of size 150 mm, complete all as specified and as directed by Engineer-in-charge.
20
-
-
... More
S&F Mild steel butt hinges, medium weight, cold rolled, 100 mm, ISI marked, fixed to PVC/ wooden/ iron chowkhats complete all as specified and as directed by Engineer-in-Charge.
180
100
-
... More
Supply and fixing in repairs 300 mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed complete all as specified and directed by Engineer-in-charge.
20
53
-
... More
S&F Tower bolt, 200 mm, Extruded aluminium alloy, anodised complete all as specified and as directed by Engineer-in-charge.
20
10
-
... More
S&F Tower bolt, 150 mm, Extruded aluminium alloy, anodised complete all as specified and as directed by Engineer-in-charge.
100
11
-
... More
S&F 250 mm long Mild Steel, sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engineer-in-charge.
10
1
-
... More
S&F in repair 25mm dia Stainless Steel curtain rod with fancy brackets/ end brackets/ fennels and fixing stops, rollers etc complete all as specified and as directed by Engineer-in-charge.
150
-
-
... More
S&F in repair of Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-charge.
30
100
-
... More
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, complete all as specified and directed by Engineer-in-charge.
150
53
-
... More
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, complete all as specified and directed by Engineer-in-charge.
300
10
-
... More
S&F 75 mm bore PVC bends of any radius complete all as specified and directed by Engineer-in-charge.
15
11
-
... More
S&F 110 mm bore PVC bends of any radius complete all as specified and directed by Engineer-in-charge.
50
1
-
... More
S&F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including necessary PCC as required complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
S&F in repair PVC(SWR) gully traps 125/110 mm dia setting and jointing with cement solvent complete all as specified and directed by Engineer-in-charge.
10
100
-
... More
S&F in repairs Vitreous china counter top oval type wash hand basin, white, flat back, of size 550 x 400 mm including Pillar Taps 15 mm Bore, Cast Copper Alloy with Capstan Heads, Chromium Plated, fancy type and 32 mm dia Brass Chromium Plated Waste coupling and PVC connection pipe of 15 mm x 600 mm long, a Pair of Angle iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and directed by Engineer-in-charge.
20
53
-
... More
S&F Vitreous China half stall urinal, fixed against wall in cement mortar (1:2), securing urinal with and including 60 mm long brass screws, pointing around urinal back in cement, including CP waste coupling, 32 mm PVC waste pipe, fixed in repairs, complete all as specified and directed by Engineer-in-charge.
18
10
-
... More
S&F in repair 15 mm bore brass CP Urinal valve, auto closing system (push cock) with built in control & wall flange complete all as specified and directed by Engineer-in-charge.
18
11
-
... More
S&F in repair Brass, Chromium plated urinal spreader suitable for 15 mm bore pipe complete all as specified and directed by Engineer-in-charge.
18
1
-
... More
Supply and fixing in repairbevelled edge mirror of selected quality glass of 5 mm size, providing hole as required in corner & centre, fixed with 3 inch screws and rawl plugs including good quality SS Cap (on screw head) etc, complete all as specified and directed by Engineer-in-charge.
25
-
-
... More
Supply and fixing in repair vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, with all fittings and connection, fixed complete all as specified and directed by Engineer-in-charge.
24
100
-
... More
S&F in repair 10 litre capacity PVC valveless, syphonic action type, low level flushing cistern white complete with inlet, ball valve float and handle including bracket complete all as specified and directed by Engineer-in-charge.
30
53
-
... More
S&F in repair CP waste coupling 32 mm bore for WHB with long screwed shanks and fly nuts complete all as specified and directed by Engineer-in-charge.
24
10
-
... More
S&F in repair of bib taps, fancy type, chromium plated, 15 mm bore with crutch/ butterfly handle complete all as specified and directed by Engineer-in-charge.
100
11
-
... More
S&F in repair of Angle (stop) cock, fancy type 15 mm bore, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-charge.
100
1
-
... More
S&F in repair Pillar tap, 15 mm bore, cast copper alloy, fancy type with capstan head, chromium plated, screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, fancy type complete all as specified and directed by Engineer-in-charge.
24
-
-
... More
S&F in repair stainless steel Grating 125 mm (5'') size complete all as specified and directed by Engineer-in-charge.
25
100
-
... More
S&F in repair PVC connections, 15 mm bore size, 450 mm length with PTMT nut etc complete all as specified and directed by Engineer-in-charge.
100
100
-
... More
S&F in repair waste pipe of polyethylene of low or high density or PVC, 32 mm dia, complete all as specified and directed by Engineer-in-charge.
50
53
-
... More
Supply and fixing in repair towel rail, 600 mm long of PTMT fixed with and including chromium plated screws and wooden/ plastic cleats (minimum weight 190 gms), complete all as specified and directed by Engineer-in-charge.
25
10
-
... More
S&F in repair of brass chromium plated shower rose, 125 mm size with long swivel plush CP arm complete all as specified and directed by Engineer-in-charge.
25
11
-
... More
S&F in repair 15 mm bore Stop valves (concealed type), cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with capstan head, with long shank and cup screwed both ends for iron pipe or for unions, complete all as specified and directed by Engineer-in-charge.
30
1
-
... More
S&F in repair Brass, Chromium plated mixer, 15 mm bore dia pipe for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.
10
-
-
... More
Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engineer-in-charge.
25
100
-
... More
Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-charge.
100
53
-
... More
Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-charge.
100
10
-
... More
Supplying and laying of 20 mm Outer dia CPVC pipes, SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.
100
11
-
... More
Supplying and laying of 25 mm Outer dia CPVC pipes, SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.
100
1
-
... More
S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Demolition of cement concrete (un-reinforced) of any description and in any position (below or above GL at any height) not otherwise specifically provide for complete all as specified and directed by Engineer-in-Charge.
30
100
-
... More
M&L for 75 mm thick Cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregates) as in Plinth protection finished the concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
300
53
-
... More
M&L for 75 mm thick Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in Sub base finished the concrete surface even complete all as specified and directed by Engineer-in-Charge.
100
10
-
... More
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.
4
11
-
... More
Supply and fixing precast concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed by Engineer-in-Charge.
100
1
-
... More
M&L for cement concrete 1:2:4, Type B-1 (using 20 mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by Engineer-in-Charge.
2
-
-
... More
Dismantling of Plain or corrugated AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-Charge.
100
100
-
... More
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
75
53
-
... More
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and as directed by Engineer-in-Charge.
25
10
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.
20
11
-
... More
S&F Mild Steel Works as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E-250) quality- B. complete all as specified and as directed by Engineer-in-Charge.
500
1
-
... More
S&F steel rolling shutters made out of 1.25 mm thickness of lath, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle, complete all as specified and as directed by Engineer-in-Charge.
75
-
-
... More
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engineer-in-Charge.
6
100
-
... More
S&F Ball bearing for rolling shutters complete all as specified and as directed by Engineer-in-Charge.
3
53
-
... More
Treating soil along the external wall below concrete or masonry apron using chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and as directed by Engineer-in-Charge.
100
10
-
... More
Treatment of soil under existing floors using chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and as directed by Engineer-in-Charge.
50
11
-
... More
Treating the soil under plinth protection at the rate of 5 litres of chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) per square metre of surface area, complete all as specified and as directed by Engineer-in-Charge.
300
1
-
... More
Treating at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as specified and as directed by Engineer-in-Charge.
20
-
-
... More
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
300
100
-
... More
S&F Brass Elbow 20 mm for CPVC pipe lines complete all as specified and as directed by Engineer-in-Charge.
15
-
-
... More
S&F Brass Elbow 25mm for CPVC pipe lines complete all as specified and as directed by Engineer-in-Charge.
10
100
-
... More
S&F Brass Tee 20mm for CPVC pipe lines complete all as specified and as directed by Engineer-in-Charge.
12
53
-
... More
S&F Brass Tee 25mm for CPVC pipe lines complete all as specified and as directed by Engineer-in-Charge.
10
10
-
... More
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete/ brick masonry and making good disturbed ground complete all as specified and as directed by Engineer-in-Charge.
350
11
-
... More
Dismantling fencing wire mesh, any type complete all as specified and as directed by Engineer-in-Charge.
1000
1
-
... More
Demolition of plain cement concrete in ground floor and paving not exceeding 15 cm thickness below or above ground level complete all as specified and as directed by Engineer-in-Charge.
15
-
-
... More
Excavation in post holes not exceeding 0.50 cum, getting out, in any type of soil, returning filling in and ramming earth, watering and removing surplus soil not exc 50 m in any type of soil complete all as specified and as directed by Engineer-in-Charge.
115
100
-
... More
M&L for Plain cement concrete 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in foundation of fencing posts complete all as specified and as directed by Engineer-in-Charge.
10
53
-
... More
S&F for Mild steel angle iron post as in fencing posts and struts including cut to length, cutting top to shape as directed drilling holes notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 and embedded in concrete complete all as specified and as directed by Engineer-in-Charge.
2000
10
-
... More
Supply only chain link fencing of any type and size of dia not exceeding 4.00 mm galvanized steel wire, size of mesh as approved complete all as specified and as directed by Engineer-in-Charge. Note:- Weight of chain link fencing shall be ascertained by BOO convened by the GE.
2100
11
-
... More
S&F for Mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exceeding 5.0 cm but not exceeding 10.0 cm long, diameter of shank 5 to 10 mm, complete all as specified and as directed by Engineer-in-Charge.
25
1
-
... More
Supply only mild steel round bars 10 mm dia, for horizontal tie bars/ line wire for fencing post etc including necessary welding or hooking for joints complete all as specified and as directed by Engineer-in-Charge.
450
-
-
... More
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed by Engineer-in-Charge.
1000
100
-
... More
S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured separately) fixed in repairs including dismantling of existing barbed wire complete all as specified and as directed by Engineer-in-Charge.
25
53
-
... More
Taking down copper/ aluminum point wiring for (light, fan, socket point 5/15 amps) complete including fitting such as switches, ceiling rose, light fittings, sockets, Lamp holder, ceiling roses etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors etc all as specified and as directed by Engineer-in-charge.
1020
10
-
... More
Material and labour for point wiring with approved colour coded multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box of suitable size of frame, cover for mounting switches, socket and regulator fixed on surface flush with wall, comprising of One light/ bell/ buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator complete all as specified and as directed by engineer-in-charge.
650
11
-
... More
NOTE for serial item no 151: (i) The quoted rate shall deemed to include the cost of metal flush boxes, modular white cover plate, provision of blank plates as per site requirement etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing. (iii) Instruction for point wiring to be followed/compiled strictly as per Para 1 (a) to (q), Page Ser No 439 of SSR Part-II of 2020.
-
-
-
... More
All as per serial item 151.00 here-in-before but for socket outlet, 3 pin 5 Amps on same board complete all as specified and as directed by engineer-in-charge.
150
1
-
... More
All as per serial item 151.00 here-in-before but for socket outlet, 3 pin 6 Amps on independent board complete all as specified and as directed by engineer-in-charge.
90
100
-
... More
All as per serial item 151.00 here-in-before but One socket outlet three pin, 6/16 Amp, independent board, with 2.5 Sqmm (nominal area) FRLSH cable & 2.5 Sqmm (nominal area) cable as earth continuity conductor complete all as specified and as directed by engineer-in-charge.
130
53
-
... More
S&F modular switch one way 6 Amps, one module, 230 volts, single pole, complete all as specified and as directed by engineer-in-charge.
890
10
-
... More
S&F modular switch one way, 16 Amps, one module, 230 volts, single pole complete all as specified and as directed by engineer-in-charge.
130
11
-
... More
S&F modular socket outlet 2 in 1, 3/5 pin 6 Amps two module 230 volts complete all as specified and as directed by engineer-in-charge.
240
1
-
... More
S&F modular socket outlet 2 in 1, 6/16 Amps, two module, 230 volts complete all as specified and as directed by engineer-in-charge.
130
-
-
... More
S&F ceiling rose, surface bakelite 65 x 50 mm dia, three terminal complete all as specified and as directed by engineer-in-charge.
460
100
-
... More
S&F LED bulb 09 watt, B22 type complete all as specified and as directed by Engineer-in-charge.
90
53
-
... More
S&F modular fan regulator, single pole, one module, 230 volts complete all as specified and as directed by engineer-in-charge.
190
10
-
... More
S&F Lamp holder insulated body PVC/ Polycarbonate type with backplate suitable for batten fitting complete all as specified and as directed by engineer-in-charge.
90
11
-
... More
Disconnection and taking down old unserviceable MCB DB, junction box, panels of any size complete with all MCCB's, MCB's etc and removing from site, complete all as specified and as directed by engineer-in-charge.
15
1
-
... More
S&F in repair sheet metal enclosures for MCB DB SPN 240 volts, 8 way, double door fitted with 200 amps bus bar, neutral link, earth bar and din rail complete all as specified and as directed by engineer-in-charge.
10
-
-
... More
S&F in repair MCCB 4 pole, 3 phase 415 volts of capacity 125 Amps, 16 KA with adjustable thermal and magnetic release complete with proper cooper thimble connection complete all as specified and as directed by engineer-in-charge.
5
100
-
... More
S&F in repair vertical TPN distribution board, double door, flush mounting with provisions for MCCBs incomer upto 125 to 160 Amp & outgoing, 4 way, having IP 54 protection complete all as specified and as directed by Engineer-in-Charge.
5
53
-
... More
S&F in repair MCB, SPN, 40 to 63 Amp, 230 volts having breaking capacity 10KA "C" type complete all as specified and as directed by engineer-in-charge.
10
10
-
... More
S&F in repair MCB, SP, 6 to 32 Amp, 230 volts having breaking capacity 10KA "C" type complete all as specified and as directed by engineer-in-charge.
120
11
-
... More
S&F in repair LED light fitting 1x 9W/ 1x 10W bulkhead luminaries including LED light driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by engineer-in-charge.
20
1
-
... More
S&F in repair SLIM LED batten with polycarbonate housing and diffuser with elegantly desinged end caps 1 x 20W, 220 V, AC connecting up with three core flexible of suitable size from ceiling rose complete all as specified and as directed by engineer-in-charge.
320
-
-
... More
S&F in repair LED Mirror light fitting, 10 watt with high output diffuser, 2 feet length, 220 volts, AC decorative box type with driver, holder including LED tubelight connection up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by engineer-in-charge.
20
100
-
... More
Disconnection and Taking down carefully copper/ aluminium sub main wiring including PVC conduit pipe of any size and any type complete all as specified and as directed by engineer-in-charge.
1100
53
-
... More
M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 6.0 sqmm, LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/ appropriate dia with accessories and fittings and one run of 6.0 sqmm single core multi stranded copper conductor cable as earth continuity conductor complete all as specified and as directed by engineer-in-charge.
500
10
-
... More
Note :-
1. Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length.
2. Cable required for connection to DBs shall deemed to be incl in the quoted rates and shall not be measured separately. 3. Earth wire shall run inside the conduit pipe.
-
-
-
... More
M&L of Sub main wiring with Four runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 10.0 sqmm, LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/ appropriate dia with accessories and fittings and one run of 10.0 sqmm single core multi stranded copper conductor cable as earth continuity conductor complete all as specified and as directed by engineer-in-charge.
600
11
-
... More
Note :-
1. Four runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length.
2. Cable required for connection to DBs shall deemed to be incl in the quoted rates and shall not be measured separately. 3. Earth wire shall run inside the conduit pipe.
-
-
-
... More
M&L for earthing complete with galvanised steel earth plate electorde 600 mm x 600 mm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre below ground level) connected to galvanised earth lead wire 4 mm dia by means of GI bolts nuts, check nuts washer of galvanised iron or steel all as shown in electric plate No 5 of MES SSR Part-I and including excavation & earth work in any type of soil, disposal of soil, providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix (1:3:6) type C-I with 40 mm thick RCC 1:2:4 type B-1, cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering pipe of 20 mm dia GI light grade and 15 mm dia light grade pipe for earth lead protection and testing on completion, complete including taking down old earthing complete all as specified and as directed by engineer-in-charge.
20
1
-
... More
Note: The quoted unit rate shall be including of protection pipe and GI Wire from top to earth plate up to 7.5 meters.
-
-
-
... More
Supply and fixing in replacement LED building security/ street light fitting 35 Watt, 230 V AC, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and as directed by Engineer-in-charge.
10
-
-
... More
S&F in replacement of Recess mounted LED, ultra slim 2' X 2', 36 watt, cool day white light (6000 K), edge lit tile in extruded aluminium housing with full opal diffuser suitable for perfect lighting complete including cutting hole of required size in POP/ false ceiling and making good of disturbed surface complete all as specified and as directed by Engineer-in-Charge.
20
100
-
... More
Cutting chases, pinning in, making good to facing where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc for concealed conduit wiring etc not exceeding 10 cm width or girth including making good the disurbed surface complete all as specified and as directed by Engineer-in-charge.
850
53
-
... More
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, BEE 5 star rated with brushless direct current motor (BLDC) including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by engineer-in-charge.
120
10
-
... More
Supply and fixing exhaust fan, made of sturdy Engineering plastic complete with louvers shutters, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and as directed by engineer-in-charge.
15
11
-
... More
Supply and fixing of electric water heater, storage type, steel body with copper inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. and including taking down unserviceable water heater and deposit to E/M Store complete all as specified and as directed by engineer-in-Charge.
10
1
-
... More
Note:- Geyser will be fitted with fasteners - 04 Nos including bolts, washers etc grouted in walls and making good disturbed surface. Quoted rates against the items shall be deemeed to include this aspect.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%