Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Ca No. Cwe/chm-03/2025-26 Specical Repair To Toilet Block At Chandimandir in Panchkula, Haryana, with an estimated contract value of Rs. 1,44,24,000. The bid opening date for this tender is 03-05-2025 and the last date for bid submission is 09-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 2,19,240Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Ca No. Cwe/chm-03/2025-26 Specical Repair To Toilet Block At Chandimandir
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_706502_1Tender No
CWE/CHM-03/2025-26Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&l for non skid ceremic tiles 7 to 8mm thick square/ rectangular area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15 mm thick screed bed for floor finishes in CM 1:4 complete all as specified and as directed by Engineer-in-charge.
100
53
5300
... More
M&L Non Skid ceramic coloured tiles 7mm to 8mm thick, area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick cement mortar (1:4) screed bed for floor finishes complete all as specified and as directed by Engineer-in-charge.
400
10
4000
... More
M&L for 30 mm thick PCC 1:2:4 type B-0 using 12.5 mm gradred stone aggregate as in floor even and rough to receive the top finishes like kota stone/ floor tiling complete all as specified and as directed by Engineer-in-charge.
500
11
5500
... More
M&L for 100 mm thick Plain Cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregates) as in hard standings including finishing the concrete surface even and rough complete all as specified and as directed by Engineer-in-charge.
70
1
87.5
... More
M&L for 75 mm thick Plain Cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregates) as in Plinth protection finished the concrete surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
75
-
-
... More
M&L Glazed ceramic coloured printed tiles in vertical surfaces of size 300 x 450 x 7 mm, set and jointed in neat cement slurry over 10 mm thick rendering in Cement Mortar 1:4 for receiving the tiles complete all as specified and as directed by Engineer-in-charge.
1300
100
130000
... More
M&L for 16-18 mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking plateform and like in cement morter (1:4) including 15 mm thick screed bed in cement mortar 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-charge.
22
53
1166
... More
M&L for 16-18 mm thick Granite work (table rubbed and polished in two sides) in urinal partition fixed in wall by cutting groove and set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with granite shade with Rounding to edges exposed to view complete all as specified and as directed by Engineer-in-charge.
3
10
30
... More
Providing edge moulding to 16-18 mm thick stone (any description) of counters, vanities etc, including machine polishing to edge to give high gloss finish for granite stone etc. complete all as specified and as directed by Engineer-in-charge.
45
11
495
... More
Demolition of reinforced concrete such as roofs, floors, beams, staircase, landing, chajjas, facia and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed by Engineer-in-charge.
1.6
1
2
... More
M&L for Reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-charge.
1.6
-
-
... More
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works exceeding 200mm thick (Horizontal or sloping) for rough finish surface of concrete complete all as specified and as directed by Engineer-in-charge.
22
100
2200
... More
M&L for mild steel TMT bars 8 mm dia & over, cut to length, bent to shape reqd including cranking, bending specially for columns, hooking ends & binding with MS wire annealed not less than 0.9 mm dia welding as required at site complete all as specified and as directed by Engineer-in-charge.
165
53
8745
... More
Demolition of brick work masonry, built in cement mortar including dismantling all quoins, arches, pillars etc complete all as specified and as directed by Engineer-in-charge.
22.3
10
223
... More
M&L for brick work with sub class 'B' bricks straight/ curved on plan to any radius built in cement mortar 1:4 as in half brick thick walls complete all as specified and as directed by Engineer-in-charge.
150
11
1650
... More
M&L for Brick work with sub class ‘B’ brick (old size bricks), straight or curved in plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge.
5
1
6.25
... More
Taking down cement plaster on brick/ stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge.
2500
-
-
... More
Material and labour for 15 mm thick rendering in Cement and Sand mortar 1:6 over fair face brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
1000
100
100000
... More
Material and labour for 15 mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished fair and even with using WPC complete all as specified and as directed by Engineer-in-charge.
Note :- (WPC shall be measured and paid for separately)
1000
53
53000
... More
M&L for rendering 5 mm thick in cement mortar 1:3 as in ceiling surfaces and making surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
500
10
5000
... More
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted over a coat of alkali resistance primer over 1.00 mm thick of cement based wall care putty as preparatory to distemper complete all as specified and directed by Engineer-in-Charge.
1000
11
11000
... More
Complete removal of existing treatment and applying two coats of Oil bound Distemper over 1.00 mm thick wall putty as preparatory to distemper on surfaces of wall up to height of three storey building including necessary scafolding and safety arrangements complete all as specified and directed by Engineer-in-Charge.
8500
1
10625
... More
M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.
500
-
-
... More
M&L for preparation of old decorated Ceiling surfaces and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.
5000
100
500000
... More
M&L for Preparing newly plastered wall surfaces and two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface complete all as specified and directed by Engineer-in-Charge.
1000
53
53000
... More
M&L for two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including Complete removal of existing treatment complete all as specified and directed by Engineer-in-Charge.
4000
10
40000
... More
Taking down chowkhats or frames with shutters (without taking off shutters) exceeding 1.5 sqm and not exceeding 4.00 sqm each of any description including making good the disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.
15
11
165
... More
Taking down chowkhats or frames not exceeding 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified and directed by Engineer-in-charge.
220
1
275
... More
Taking down shutter of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and removing from site complete all as specified and directed by Engineer-in-charge.
5
-
-
... More
S&F of pressed steel frame for doors with single rebates of size 105 x 60 mm made with steel sheet of 1.25 mm thickness in and including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed by Engineer-in-charge.
50
100
5000
... More
S&F 125 x 60 mm pressed steel frames 1.25 mm thick for doors, windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified and as directed by Engineer-in-Charge.
25
53
1325
... More
S&F 2nd class hard wood factory made 35 mm thick panelled door shutter (two panel) factory made, with lock rail and panel of 9 mm thick BWP commercial ply or 12 veneered particle board with commercial veneering on both faces, the size of rail and style as per IS 1003 (part-I) klin seasoned and chamically treated complete all as specified and directed by Engineer-in-charge.
20
10
200
... More
S&F 2nd class hard wood glazed and skeleton shutters, 35 mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.
20
11
220
... More
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples/ beads complete all as specified and directed by Engineer-in-charge.
55
1
68.75
... More
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples/ beads complete all as specified and directed by Engineer-in-charge.
25
-
-
... More
Hacking out old broken glass (any thicknes, size, quality or desctiption) from metal frame including punching or drillilng out old glazing pins/ spring clips and providing and fixing complete all as specified and directed by Engineer-in-charge.
15
100
1500
... More
Supply and fixing 4 mm thick sheet glass, ordinary quality, in square not exceeding 0.5 Sqm in each panes and fixed in any type of frame and glazing with oil putty (or beading) complete all as specified and directed by Engineer-in-charge.
60
53
3180
... More
Supply and fixing 4 mm thick figured glass, pin head type, ordinary quality in squares not exceeding 0.50 Sqm in each panes and fixed in any type of frame and glazing with oil putty (or beading) complete all as specified and directed by Engineer-in-charge.
15
10
150
... More
Note for serial item no 40.00 & 41.00 : Rate includes carring out work of height up to three storey building including necessary scafolding and safety arrangements.
-
-
-
... More
M&L for preperation of new steel surface of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.
160
11
1760
... More
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge.
84
1
105
... More
M&L for Preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
2000
-
-
... More
M&L for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
600
100
60000
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) all as specified as per Manufacturer's instructions complete all as specified and directed by Engineer-in-charge.
420
53
22260
... More
S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant, WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-in-charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
105
10
1050
... More
Supply and fixing factory made steel windows (Box type) primer coated with glazing bar and openable shutter prepared to receive sheet glass complete including cutting holes (four Nos for each window) and making good dismantled portion in PCC 1:2:4, type B-1 including following fittings welded to frame/ shutter complete all as specified.
(a) Hold fast 150 mm out of 25 x 6 mm flat iron bend to shape, 04 Nos each window (02 Nos on each side).
(b) Handle of Z section 20 mm x 25 mm, 100 mm long -01 No each leaf.
(c) MS tower bolt 150 mm long, 02 Nos each leaf.
(d) Z section of 20 mm x 25 mm, 100 mm long stopper 01 No each leaf.
(e) Cleat 55 mm long of hollow sqare section of 15 mm x 15 mm of 24 guage thickness, welded to hinge of 55 mm size, 01 No each leaf.
(f) MS box type hinges of 75 mm size, 02 Nos per leaf.
(g) Fabrication and fixing complete.
60
11
660
... More
Note for serial item no 48.00: (i) Glass panes, MS wire cloth & painting shall be measured and paid for saparately.
(ii) MS flat iron for fixing of wire cloth and window shutters shall deemed to be included in rate quoted against this item.
-
-
-
... More
All as per Serial item No 48.00 here in before but without glazing bar.
60
1
75
... More
S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed by Engineer-in-charge.
32
-
-
... More
M&L for framed work as in doors or gates/ grill/ grating/ guard bars/ hold fasts etc of angle, tee or any other sections of mild steel woork including welding, fabrication with guesset plate, drilled holes for fixing of steel sheeting or any other sheet covering complete all as specified and directed by Engineer-in-charge.
100
100
10000
... More
S&F Butt hinges, 100 mm, Type C-21, extruded Aluminium alloy with galvanised mild steel hinge pin, complete all as specified and directed by Engineer-in-charge.
270
100
27000
... More
S&F Aluminium barrel tower bolt, 200 mm size of extruded section complete all as specified and directed by Engineer-in-charge.
40
53
2120
... More
S&F Aluminium barrel tower bolt, 150 mm size of extruded section complete all as specified and directed by Engineer-in-charge.
180
10
1800
... More
S&F sliding door bolt, 300 mm size, aluminium alloy, anodised with hasp and staple (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16 mm dia and 300 mm long complete all as specified and as directed by Engineer-in-charge.
10
11
110
... More
S&F handles, 150 mm, Extruded aluminium alloy, Cast type, anodised complete all as specified and as directed by Engineer-in-charge.
220
1
275
... More
S&F 75 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall/ floor including clamps as required, including taking down existing SWR pipe with all fittings complete all as specified and directed by Engineer-in-Charge.
260
-
-
... More
S&F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall/ floor including clamps as required, including taking down existing SWR pipe with all fittings complete all as specified and directed by Engineer-in-Charge.
96
100
9600
... More
S&F 75 mm bore PVC (SWR) bend, fixed to rain water pipe complete all as specified and directed by Engineer-in-Charge.
30
53
1590
... More
S&F 75 mm bore PVC (SWR) bend with access door with rubber ring joints fixed to water pipes complete all as specified and directed by Engineer-in-Charge.
24
10
240
... More
S&F 110 mm bore PVC (SWR) bend, fixed to rain water pipe complete all as specified and directed by Engineer-in-Charge.
60
11
660
... More
S&F 110 mm bore PVC (SWR) bend with access door with rubber ring joints fixed to water pipes complete all as specified and directed by Engineer-in-Charge.
8
1
10
... More
S&F in repair 110 mm bore PVC (SWR) Junction (Single T) equal or un equal complete all as specified and directed by Engineer-in-Charge.
24
-
-
... More
S&F in repair 75 mm bore PVC (SWR) Junction (Single T) equal or un equal complete all as specified and directed by Engineer-in-Charge.
24
100
2400
... More
S&F in repair PVC (SWR) floor traps, 75 mm dia with grating including jointing to waste pipe with solvent cement complete all as specified and directed by Engineer-in-Charge.
40
53
2120
... More
S&F in repair Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including 100 mm CI 'P' or 'S' trap set in and including fixing in concrete complete all as specified and directed by Engineer–in-Charge.
50
10
500
... More
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including pvc seat cover complete all as specified and directed by Engineer–in-Charge.
10
11
110
... More
S&F in repair PVC valveless syphonic action type flushing cistern, low level, white with PVC inlet ball valve, float and handle, 10 litres capacity and connection to pipes including PVC connection and 32 mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor complete all as specified and directed by Engineer-in-Charge.
60
1
75
... More
S&F vitreous china counter top hand wash basin, snow white colour and size of 560 x 470 x 190 mm, 32 mm dia brass chromium plated waste coupling & waste pipe including taking down old wash basin any type and pillar tap complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
S&F in repair Vitreous china urinal, Half stall type, white complete including providing and fixing clamps, bedding to urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; including 40 mm dia brass chromium plated waste coupling & waste pipe, grating and union for discharge pipe complete all as specified and directed by Engineer-in-Charge.
20
100
2000
... More
S&F in repair Brass chromium plated bottle traps 40 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing with minimum water seal of 25 mm, complete all as specified and directed by Engineer-in-Charge.
20
53
1060
... More
S&F in repair 15 mm bore brass CP Urinal valve, auto closing system (push cock) with built in control & wall flange complete all as specified and directed by Engineer-in-Charge.
20
10
200
... More
S&F Brass CP urinal spreader suitable for 15 mm bore pipe complete all as specified and directed by Engineer-in-Charge.
20
11
220
... More
S&F 15 mm dia brass CP mixer for wash hand basin for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
30
1
37.5
... More
S&F in repair Bib tap, brass, fancy type, long body with wall flange, chromium plated, screwed down for iron pipe or for brass ferrule, suitable for 15 mm bore pipe complete all as specified and directed by Engineer-in-Charge.
100
-
-
... More
Supply and fixing in repair Shower rose, brass chromium plated, with or without swivel joints, 100 mm size including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.
30
100
3000
... More
S&F of PVC connections, 15 mm bore size, 450 mm length with PTMT nut etc complete all as specified and directed by Engineer-in-Charge.
180
53
9540
... More
Supply and fixing in repair 20 mm dia brass chromium plated towel rail, 600 mm long fixed with chromium plated screws with pvc rawl plugs complete all as specified and directed by Engineer-in-Charge.
40
10
400
... More
Supply and fixing in repair towel ring, Brass chromium plated, screws with pvc rawl plugs complete all as specified and directed.with pvc rawl plugs complete all as specified and directed by Engineer-in-Charge.
20
11
220
... More
S&F as in repair of concealed stop cock, cast copper alloy, chromium plated, fancy type, 15 mm bore, screwed down high pressure, complete all as specified and directed by Engineer-in-Charge.
12
1
15
... More
S&F in repairs 15 mm dia Angle Cock/ stop cock, fancy type, cast copper alloy, Chromium Plated, screwed down, high pressure, screwed both ends for iron pipe or unions complete all as specified and as directed by the Engineer-in-Charge.
180
-
-
... More
Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engineer-in-charge.
10
100
1000
... More
Supply and laying of 25 mm outer diameter CPVC Pipe SDR 11 and Plain CPVC SDR 11 fitting in wall/ floor/ ceiling complete including taking down 20 mm bore old GI Pipe complete all as specified and as directed by the Engineer-in-Charge.
300
53
15900
... More
Supply and laying of 20 mm outer diameter CPVC Pipe SDR 11 and Plain CPVC SDR 11 fitting in wall/ floor/ ceiling complete including taking down 15 mm bore old GI Pipe complete all as specified and as directed by the Engineer-in-Charge.
300
10
3000
... More
S&F Brass Elbow for CPVC Pipe 20 mm outer dia, ISI marked, complete all as specified and directed by Engineer-in-Charge.
30
11
330
... More
S&F Brass Tee for CPVC Pipe 20 mm outer dia, ISI marked, complete all as specified and directed by Engineer-in-Charge.
30
1
37.5
... More
S&F Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC Pipe 20 mm outer dia complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
Supply and Fixing of 25 mm outer diameter CPVC Ball Valve including all fittings complete all as specified and directed by Engineer-in-Charge.
10
100
1000
... More
Cutting chases, pinning in, of brick walls or concrete surfaces, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of inserting sheets, landings, steps, sills, sunshades, shelves, lintels, etc.; for concealed water tubing, concealed conduit wiring etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed by Engineer-in-Charge.
1548
53
82044
... More
Demolition of un-reinforced cement concrete exceeding 15 cm thick, any description and in any position not otherwise specially provided for and removing all demolished material/ debris to 1.50 Km from the site and depositing where directed complete all as specified and directed by Engineer-in-Charge.
106
10
1060
... More
M&L for Plain cement concrete 1:5:10, type E-2 (using 40 mm graded aggregates) as in sunken filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
106
11
1166
... More
Material and labour Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc complete all as specified as under:-
(a) 15 mm plaster in cement mortar (1:3) mixed with water proofing compound as per manufacturer’s instructions after roughning and cleaning the surface.
(b) Curing the sunken portion with water minimum for 48 hours by ponding. (c) Applying 3 mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer as per manufacturer's instructions. (d) Joints/ Traps/ WC/ soil pipes shall be properly sealed with approved sealing compound.
320
1
400
... More
Supply and fixing bevelled edge mirror of selected quality glass of 5 mm thick, each providing 04 Nos holes on corner, fixed with 4 Nos of 3 Inch screws and rawl plugs including 4 Nos good quality SS Cap (on screw head) etc, complete all as specified and directed by Engineer-in-Charge.
20
-
-
... More
Supply and fixing Rotational Moulded Polyethylene water storage tanks (Cylindrical vertical with closed top) of 1000 litres capacity, Triple layered, hoisted and fixed in position all as specified in SSR Part I, including PTMT tank nipple, float valve of 20 mm bore etc, including dismantling existing water tank complete all as specified and directed by Engineer-in-charge.
36
100
3600
... More
Supply only integral water proofing compound, ISI marked complete all specified and directed by Engineer-in-Charge.
520
53
27560
... More
M&L for providing precast cement concrete louvres and jallies, 1:2:4, Type B-0 (using 12.5 mm graded stone aggregate), 35 mm thick (measured solid) including all mouldings but excluding frame, set in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
25
10
250
... More
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge.
256
11
2816
... More
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any type of existing treatment complete all as specified and as directed by Engineer-in-Charge.
2560
1
3200
... More
Providing plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates), 50 mm thick (averaging) as in roof padding, kerbs, levelling course, complete all as specified and as directed by Engineer-in-Charge.
2560
-
-
... More
M&L for PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggegates) as in coping, weathering and similar works complete all as specified and as directed by Engineer-in-Charge.
5
100
500
... More
M&L for Rendering 10 mm thick, finished even and fair on roof slab in cement mortar 1:4, using water proofing compound @ 3% by weight of cement complete all as specified and as directed by Engineer-in-Charge.
Note :- WPC will be measured and paid for seperately
2560
53
135680
... More
M&L for providing and lying 3 mm thick APP (Atactic polypropylene polymer) modified prefabricated five layer, weight not less that 3.6 Kg/Sqm water proofing membrane, black finished, reinforced with non-woven polyester matt make as approved, consisting of a coat of bitumen primer @ 0.40 Ltr/sqm by the same membrane manufactruer, of density 0.87 to 0.89 Kg/ltr at 25 degree celcius temperature and viscosity 70-160 cps with Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area). Over the primer coat, the layer membrane shall be laid using butane torch and sealing all joints etc after preparing the surface complete as per standard practice as per manufactrer's instructions complete all as specified and directed by Engineer-in-charge.
2560
10
25600
... More
Material and labour for 40 mm thick brick tiles with including 20 mm thick cement mortar 1:4 jointed, grouted and pointed complete mixed with crude oil 5% by weight of cement complete all as specified and directed by Engineer-in-charge.
1024
11
11264
... More
All as per serial item No 103.00 here-in-before but except tiles.
1536
1
1920
... More
M&L taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement, wire brushing and cleaning the exposed steel reinforced bar, apply rust remover over the cleaned re-bar surface, wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement to strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40 mm average thickness in two coats with and including polymer @10% by weight of cement, including GI chicken mesh and 10 mm thick rendering in CM 1:4 complete all as specified including erecting and dismantling steel scaffolding for carrying out the work upto a height of 12m (Appx) complete all as specified and as directed by Engineer-in-Charge. Make;- Dr fixit/ Sunanda/ chemestik/ fosrock.
75
-
-
... More
Note for Serial Item No. 105.00:-
1. Scaffolding to carry out the work shall be arrenged by the contractor. Quoted rate against the item shall deemed to include this aspect.
2. new reinforcement will be measured and paid for separately.
-
-
-
... More
Excavation in trenches in hard/ dense soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc. or for shafts, wells cesspits, manholes, pier hole etc. and getting out, complete all as specified and directed by Engineer-in-charge.
41
100
4100
... More
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm depth in soils, complete all as specified and directed by Engineer-in-charge.
22
53
1166
... More
Removal of excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed by Engineer-in-charge.
19
10
190
... More
Demolition and breaking up drain pipes of any type/ description, internal dia of pipe 200 mm, set in cement mortar including PCC packing under and hunching complete all as specified and directed by Engineer-in-charge.
Note: excavation and earth work shall be measured and paid separately.
10
11
110
... More
Material and labour for plain cement concrete 1:4:8, type D-2, (using 40 mm graded crushed stone aggregates) as in bed to drain pipes including packing under & haunching against the sides of pipes complete all as specified in SSR for 200 mm bore salt glazed pipe after the pipes are laid and tested complete all as specified and as directed by Engineer-in-Charge.
10
-
-
... More
M&L for Salt glazed stoneware drain pipes, 200 mm bore, grade 'A', ISI marked, jointed with cement mortar, laid in trenches on concrete bed or directly on hard ground as indicated and making joints and testing complete all as specified and directed by the Engineer-in-charge. Note: Excavation, RFR shall be measured and paid for separately under respectiev items of this schedule.
10
100
1000
... More
M&L for pre cast factory made RCC manhole covers of size 600mm x 600 mm x 75 mm thick for normal duty, made out of RCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) including rcc ring, MS frame as in manhole covers set and jointed in cement mortar 1:4 complete all as specified and directed by the Engineer-in-charge.
10
53
530
... More
Cleaning & desilting of manholes of size not exceeding 1.20 metre x 1.20 metre & depth not exceeding 1.5 metre using high pressure water jetting cum suction (vaccum) type machine mounted on LCV/ HCV and having facilities such as high pressure pipe and flushing after cleaning of sludge/ sludge water shall be disposed off at authorised dumping site decleared by local administraction duly covered in a hygenic manner while transporting outside MOD land complete all as specified and as directed by Engineer-in-Charge.
10
10
100
... More
Taking down copper/ aluminum point wiring for (light, fan, socket point 5/15 amps) complete including fitting such as switches, ceiling rose, light fittings, sockets, Lamp holder, ceiling roses etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors etc all as specified and as directed by Engineer-in-charge.
531
11
5841
... More
Material and labour for point wiring with approved colour coded multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box of suitable size of frame, cover for mounting switches, socket and regulator fixed on surface flush with wall, comprising of One light/ bell/ buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator complete all as specified and as directed by engineer-in-charge.
397
1
496.25
... More
All as per serial item 115.00 here-in-before but for socket outlet, 3 pin 5 Amps on same board complete all as specified and as directed by engineer-in-charge.
30
-
-
... More
All as per serial item 115.00 here-in-before but for socket outlet, 3 pin 6 Amps on independent board complete all as specified and as directed by engineer-in-charge.
40
100
4000
... More
All as per serial item 115.00 here-in-before but One socket outlet three pin, 6/16 Amp, independent board, with 2.5 Sqmm (nominal area) FRLSH cable & 2.5 Sqmm (nominal area) cable as earth continuity conductor complete all as specified and as directed by engineer-in-charge.
64
53
3392
... More
S&F modular switch one way 6 Amps, one module, 230 volts, single pole, complete all as specified and as directed by engineer-in-charge.
467
10
4670
... More
S&F modular switch one way, 16 Amps, one module, 230 volts, single pole complete all as specified and as directed by engineer-in-charge.
64
11
704
... More
S&F modular socket outlet 2 in 1, 3/5 pin 6 Amps two module 230 volts complete all as specified and as directed by engineer-in-charge.
70
1
87.5
... More
S&F modular socket outlet 2 in 1, 6/16 Amps, two module, 230 volts complete all as specified and as directed by engineer-in-charge.
64
-
-
... More
S&F modular fan regulator, 120 watt, single pole, 2 module, 230 volts complete all as specified and as directed by engineer-in-charge.
100
100
10000
... More
S&F ceiling rose, surface bakelite 65 x 50 mm dia, three terminal complete all as specified and as directed by engineer-in-charge.
281
53
14893
... More
S&F Lamp holder insulated body PVC/ Polycarbonate type with backplate suitable for batten fitting complete all as specified and as directed by engineer-in-charge.
20
10
200
... More
S&F LED Lamp, 9 Watt, B22 type complete all as specified and as directed by engineer-in-charge.
20
11
220
... More
Disconnection and taking down old unserviceable MCB DB, junction box, panels of any size complete with all MCCB's, MCB's etc and removing from site, complete all as specified and as directed by engineer-in-charge.
16
1
20
... More
S&F sheet metal enclosures for MCB DB SPN 240 volts, 8 way, double door fitted with 200 amps bus bar, neutral link, earth bar and din ral complete all as specified and as directed by engineer-in-charge.
12
-
-
... More
S&F MCCB 4 pole, 3 phase 415 volts of capacity 125 Amps, 16 KA with adjustable thermal and magnetic release complete with proper cooper thimble connection complete all as specified and as directed by engineer-in-charge.
4
100
400
... More
S&F vertical TPN distribution board, double door, flush mounting with provision for MCCBs incomer upto 125 Amp, 415 volts & outgoing 4 way having IP-43 protection complete all as specified and as directed by engineer-in-charge.
4
53
212
... More
S&F MCB, SPN, 40 to 63 Amp, 230 volts having breaking capacity 10KA "C" type complete all as specified and as directed by engineer-in-charge.
12
10
120
... More
S&F MCB, SP, 6 to 32 Amp, 230 volts having breaking capacity 10KA "C" type complete all as specified and as directed by engineer-in-charge.
136
11
1496
... More
S&F LED light fitting 1x 9W/ 1x 10W bulkhead luminaries including LED light driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by engineer-in-charge.
12
1
15
... More
S&F SLIM LED batten with polycarbonate housing and diffuser with elegantly desinged end caps 1 x 20W, 220 V, AC connecting up with three core flexible of suitable size from ceiling rose complete all as specified and as directed by engineer-in-charge.
219
-
-
... More
S&f LED Mirror light fitting, 10 watt with high output diffuser, 2 feet length, 220 volts, AC decorative box type with driver, holder incl LED tubelight connection up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by engineer-in-charge.
65
100
6500
... More
Disconnection and Taking down carefully copper/ aluminium sub main wiring including PVC conduit pipe of any size and any type complete all as specified and as directed by engineer-in-charge.
1380
53
73140
... More
M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 6.0 sqmm, LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/ appropriate dia with accessories and fittings and one run of 6.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor complete all as specified and as directed by engineer-in-charge.
390
10
3900
... More
Note: 1. Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length.
2. Cable required for connection to DBs shall deemed to be incl in the quoted rates and shall not be measured separately. 3. Earth wire shall run inside the conduit pipe.
-
-
-
... More
M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 10.0 sqmm, LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/ appropriate dia with accessories and fittings and one run of 10.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor complete all as specified and as directed by engineer-in-charge.
990
11
10890
... More
Note: 1. Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length.
2. Cable required for connection to DBs shall deemed to be incl in the quoted rates and shall not be measured separately. 3. Earth wire shall run inside the conduit pipe.
-
-
-
... More
M&L for earthing complete with galvanised steel eath plate electorde 600x 600x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr below ground level) connected to galvanised earth lead wire 4 mm dia by means of GI bolts nuts, check nuts washer of galvanised iron or steel all as shown in electric plate No 5 of MES SSR Part-I and including excavation & earth work in any type of soil, disposal of soil,providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix (1:3:6) type C-I with 40 mm thick RCC 1:2:4 type B-1, cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering pipe of 20 mm dia GI light grade and 15 mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and as directed by engineer-in-charge.
20
1
25
... More
Note: The quoted unit rate shall be including of protection pipe and GI wire from top to earth plate up to 7.5 meters.
-
-
-
... More
S&F LED street light fitting, 35 watt LED, 230 volts outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp including bracket up to 1.5 mtr length as per suitable for fitting including clamps, GI bracket with impact and corrosion resistant including thermal management in multiple cptics complete with IP 65/ 66 protection complete all as specified and as directed by engineer-in-charge.
16
-
-
... More
Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of Size 35 Sqmm, 3.5 core complete all as specified and as directed by Engineer-in-Charge.
380
100
38000
... More
M&L for Sand cushioning to UG cable 8cm thick before laying the cable and 15cm above the cable as specified in SSR to under ground cable including punning down of sand in layer complete all as specified and as directed by Engineer-in-charge. Note:(i) Consolidated/ Punned sand thickness shall be considered for purpose of payment.
(ii) Sand shall be same as specified for plastering work.
15
53
795
... More
Supply and Laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks complete all as specified and directed by Engineer-in-Charge.
3
10
30
... More
Supply and fixing of electric water heater, storage type, steel body with copper inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. and including taking down unserviceable water heater and deposit to E/M Store complete all as specified and as directed by engineer-in-charge.
Note:- Geyser will be fitted with fasteners - 04 Nos including bolts, washers etc and making good disturbed surface. Quoted rates against the item shall be deemeed to include this aspect.
24
11
264
... More
Supply and fixing exhaust fan, made of sturdy Engineering plastic complete with louvers shutters, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed by engineer-in-charge.
10
1
12.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%