Government Of Haryana Tender

Second Storey

Third storey

First class brick work laid in cement, stone dust (from crusher) mortar 1:5 in first storey upto 4 meters above plinth level. (HSR 11.28) First Storey

Second Storey

Third storey

Laying and fixing Granite stone in all shades 15mm to 18mm thick in skirting/dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite including labour for fixing cramps pins and dowels etc. except granite stone (Based on HSR 14.95) First Storey

Granite stone in all shades 15mm to 18mm thick in flooring & over service slab in any pattern as specified laid on 20 mm thick cement coarsed sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone comp. in all respect. (HSR 14.96) except granite stone. First Storey

Plastering on wall 12 mm thick cement plaster 1:6 (HSR 15.7) First Storey

Second Storey

Third Storey

Plastering on walls 15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12) First Storey

Second Storey

Third Storey

Painting two coats with plastic emulsion paint on walls on new work to give an even shade. (HSR 16.30)

Providing two coat of exterior emulsion paint (16.79)B

Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacuterer over the plastered wall surfaced to prepare the surface even and smooth complete.(HSR 16.81)

Providing and fixing of Accoustic ceiling system of"Heradesign - Superfine" Series Planks or equivalent 600mm*1200mm *25mm thickness made out of wood wool fibre of width 1 mm thickness mixed with megnasite. A high mechenical strength with crash test of 90Km/H speed & passed the ball impact test of DIN18032& EN13964. Colored Shade with T24 Grid System: Similer to Pestal RAL shades -Tiles are Water Based Spray paint only & Grids will be powder quoted to similer shades. (Tiles will be factory finishd only) Providing & fixing of equivalent to "Heradesign - Superfine" series planks - 600mm*1200mm*25mm thickness made out of wood wool fibre of width 1 mm fiber thickness mixed with magnesite with the back filling of mineral wool of 50Mm thick with 48Kg/M3 density. Clear ceiling height should be more than 299mm from slab to achieve NRC 0.90. Color scheme as per architects choice. Panels shall be laid on T24 grid system of 24mm wide grid system made out of hot dipped galvanised steel section,exposed surface with pre-coated capping,main tee of size 24*38 mm at every 600mm,c/c maximum and rotary stitched cross tee of size 24*35 mm at every 600 mm.c/c and, and wall angle of size 19*19 mm,fixed to the periphery of the wall.The above grid is suspended at every 900mm c/c in both directions using 4.0mm, thick pre-straightened GI ROD,6mm ANCHOR FASTNER at every 900m interval at the Main Tee laying AMF SK04 square Edge ceiling tiles manufactured by M/s Knauf AMF GmbH KG & Co. Germany or equivalent. FINAL FINISH - Painted similer to Pestal Colors RAL Shades: Tiles With water based spray paint factory finished only - Color as per the Architects Approval. Panels size: 600mm x 1200mm x 25mm thickness Sound absorption value NRC : upto 0.90 Building Material class reaction to fire acc. to EN 13501-1: B-s1, d0 Fire resistance system. REI30-REI90 per EN 13501. EC Conformity Certificate Reg. No.: K1-0751-CPD-209.0-02-01/2011 Edge Detail : SK04/06: Shirque edge/bevelled edge 5Mm Bevel(Teguler edge). Colour : NATURAL BEIGE Mineral wool backing : 50mm thick with 48 kg/m3 density Thickness/Weight : 11.3 Kg/m2 Manufacturing tolerance for nominal size: L3, W2, T2: ± 1 mm, for lengths 1200 mm L3: ± 2 mm. Relative humidity of up to 95%. The manufacturer will give the guarantee that, in accordance with the manufacturer’s declaration, the products have been manufactured free from defects and that, in compliance with the stipulated installation conditions or processing guidelines, they will remain fully functional for 15 years from the date of delivery & also can be used for land filling after the life of products. Note:- The false ceiling will be fixed as per Engineer-in-charge/ Architect approval and may be in curvature. 2. The false ceiling planks cost @35% of rate quoted will be deducted where planks will be replaced with light fitting.

Providing and fixing of Accoustic wall panelling with digital printing with "Heradesign - Superfine" Series Planks or equivalent 600mm*1200mm *25mm thickness made out of wood wool fibre of width 1 mm thickness mixed with megnasite. A high mechenical strength with crash test of 90Km/H speed & passed the ball impact test of DIN18032& EN13964. Digital Priting for an Image provided by An architect- Factory Finished. Providing & fixing of "Heradesign - Superfine" series planks - 600mm*1200mm*25mm thickness tile with AK01 Edges made out of wood wool fibre of width 1Mm fiber thickness mixed with magnesite with the back filling of mineral wool of 50Mm thick with 50Kg/M3 density with the wall gap of 85Mm to achieve NRC 0.90 & if we fix at a gap of 200Mm so can achieve NRC1 as well & Color shade as per the architects approvals. Panels to be fixed on framework made out GI ( 0.60mm thick & 60 MM Width x 0.27mm wide ) sections to form a section of 600mm x 600mm. Heradesign Superfine panels to be fixed on the wall with a minimum of 150mm void or gap with Galvanized screws of length 50 mm & Dia 4.5 mm. Mineral Wool of density 50 kg/m3 density (50mm thick) to be back filled. FINAL FINISH - Pestal Colors RAL shades: Water Based Spray Painted to the desired colour shade. Panels size: 600mm x 1200mm x 25mm thickness Sound absorption value NRC : upto 0.90 Building Material class reaction to fire acc. to EN 13501-1: B-s1, d0 Fire resistance system. REI30-REI90 per EN 13501. EC Conformity Certificate Reg. No.: K1-0751-CPD-209.0-02-01/2011 Edge Detail : AK 01 Colour : NATURAL BEIGE Mineral wook backing : 50mm thick with 48 kg/m3 density Thickness/Weight : 11.3 Kg/m2 Manufacturing tolerance for nominal size: L3, W2, T2: ± 1 mm, for lengths 1200 mm L3: ± 2 mm. Relative humidity of up to 90%. The manufacturer will give the guarantee that, in accordance with the manufacturer’s declaration, the products have been manufactured free from defects and that, in compliance with the stipulated installation conditions or processing guidelines, they will remain fully functional for 15 years from the date of delivery

Providing and fixing of Accoustic wall panelling of standard colour with "Heradesign - Superfine" Series Planks or equivalent 600mm*1200mm *25mm thickness made out of wood wool fibre of width 1 mm thickness mixed with megnasite. A high mechenical strength with crash test of 90Km/H speed & passed the ball impact test of DIN18032& EN13964. Standard Color: Similer to Pestal Colors RAL Shades- Tiles will be Water Based Spray painted only - Factory Finished. Providing & fixing of "Heradesign - Superfine" series planks or equivalent 600mm*1200mm*25mm thickness tile with AK01 Edges made out of wood wool fibre of width 1Mm fiber thickness mixed with magnesite with the back filling of mineral wool of 50Mm thick with 50Kg/M3 density with the wall gap of 85Mm to achieve NRC 0.90 & if we fix at a gap of 200Mm so can achieve NRC1 as well & Color shade as per the architects approvals. Panels to be fixed on framework made out GI ( 0.60mm thick & 60 MM Width x 0.27mm wide ) sections to form a section of 600mm x 600mm. Heradesign Superfine panels to be fixed on the wall with a minimum of 150mm void or gap with Galvanized screws of length 50 mm & Dia 4.5 mm. Mineral Wool of density 50 kg/m3 density (50mm thick) to be back filled. FINAL FINISH - Pestal Colors RAL shades: Water Based Spray Painted to the desired colour shade. Panels size: 600mm x 1200mm x 25mm thickness Sound absorption value NRC : upto 0.90 Building Material class reaction to fire acc. to EN 13501-1: B-s1, d0 Fire resistance system. REI30-REI90 per EN 13501. EC Conformity Certificate Reg. No.: K1-0751-CPD-209.0-02-01/2011 Edge Detail : AK 01 Colour : NATURAL BEIGE Mineral wook backing : 50mm thick with 48 kg/m3 density Thickness/Weight : 11.3 Kg/m2 Manufacturing tolerance for nominal size: L3, W2, T2: ± 1 mm, for lengths 1200 mm L3: ± 2 mm. Relative humidity of up to 90%. The manufacturer will give the guarantee that, in accordance with the manufacturer’s declaration, the products have been manufactured free from defects and that, in compliance with the stipulated installation conditions or processing guidelines, they will remain fully functional for 15 years from the date of delivery

Providing and applying Melamine polish on old wood work complete in all respect.

Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes channels plates etc including welding grinding buffing polishing and making curvature (wherever requires) and fitting the same with necessary stainless steel nuts and bolts complete, i.e fixing the raillling with necessary accessories & stainless steel dash fasteners stainless steel bolts etc. of requires size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in-charge.(For payment, only weight of stainless steel member is to be considered. no extra payment for fixing accessories such as nuts, bolts, fasteners etc will be considered).

Providing and fixing Wall treatment side/rear walls Lower Levels: Providing and fixing wall paneling in 1mm thick Laminate with 12mm thick ply panels secured over GI frame consisting of 50mm thick.

Supplying of 15mm to 18mm thick slab of pre polished granite stone as specified as per sample approved by the Engineer Incharge. Leather Brown

Cheema Pink

Cat eye Note:- Payment of the supply of granite stone will be made as per actual measurement as per site after execution.

Dismantling of stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unservi--ceable material within University Campus.

Dismantling of existing false ceiling and wall panelling

Credit for dismentalled old false ceiling material

Credit for dismentalled old wall panelling

Electrical work Wire and cables Supply and erection of 3core PVC copper insulated and sheathed circular flexible wire Size 2.50 sqmm (80/0.20mm)

Supply and erection of sheet steel enclouser distribution boards suitable for MCBs etc. on wall/ existing boards/pedestal with rag bolts including bounding to earth. Distribution board 2 way SPNMCB

Supply and erection of miniature circuit breaker / isolator 240 / 415 V in the existing distribution board including making necessary connections. (a) Miniature Circuit Breakers of 9 K.A. breaking capacity (ii) 6 amp to 32 amp SPMCB

40 amp to 63 amp SPNMCB

Earthing Pdg and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required

Supply and erection of underground cable, loose in existing pipe or trenches complete with necessary connections: 25 Sqmm 2 core cable armoured

25 sqmm 4 core cable (armoured)

Supply and erection of suitable compression type brass Cable glands for underground cable: 25 Sqmm to 50 Sqmm cable 2 to 4 core

Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineering-in-charge of the work. e) 25 Sqmm

Supply and erection of PVC unsheathed copper conductor cable single core 1100 voltas grade in pipe of suitable size excluding cost and erection of pipe cable size 1.5 sqmm (3/0.81mm)

Cable size 2.5 sqmm (3/1.05mm)

Cable size 4 sqmm (7/0.85mm)

Cable size 6 sqmm (7/1.05mm)

Cable size 10 sqmm(7/1.35mm)

Cable size 16 sqmm(7/1.70mm)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 4-way , TP&N (Horizontal)(8+12)

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect upto the entire satisfaction of the engineer-in-charge. (b) 25 mm dia

Supply and erection of copper lugs including crimping etc. upto the entire satisfaction of Engineering-in-charge of the work. (a) 1.5 sqmm to 2.5 sqmm

4 sqmm to 6 sqmm

10 sqmm

16 Sqmm

Supply and erection of MS saddles and clamps on wall/RCC parapit for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect.

Supply and erection of PVC pipe ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 32mm dia

PVC pipe of 40mm dia

Supply and erection of cable tray made out of 2mm thick glavanized perforated sheet steel including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work. 40x100mm

50x150mm

50x300mm

Supply and erection of factory manufactured cable tray cover made of 16 gauge GI sheet complete with fastoner nuts bolts and in position including all petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge. Suitable for 40x100mm

Suitable for 50x150mm

Suitable for 50x300mm

Supply installation,testing and commissioning of 150-160 watt LED highbay fittings, housing made up of LM6 aluminium die-cast with effective thermal management, sturdiness and embossed /Engraved brand name / logo name of manufacturer. The fixture should have a minimum system efficacy 125 lumen/watt and minimum system lumen output of 19500 lumens or above in neutral white cool day light (5000 K to 6500K) color output having CRI 80, PF0.95 & THD10%. The fixture shall be designed for a system life of 50000 hours @ 70% lumen maintenance with potted LED driver. Ingress protection of IP 65/66 (lampand and gear compartment) and mechanical impact resistance rating of IK 08. The fixture driver should have an operating voltage range of 140-270 V. Internal surge protection 4KV high voltage cut off and auto restart @ 320V, external surge protection of 10 KV. The fixture design should comply with EMC /EMI compliance with flicker free operations ripple 5 % BIS certification is required for LED driver & luminaire, luminaire manufacture shall provide LM79 report from NABL accredited lab & LM80 reoprt is also issued by LED manufacturer Makes Philips, Havells, Bajaj, Wipro, C& S Electric. Note:- (i) Extra 5% dirvers of total fittings are to be supplied on free of cost basic to Deptt. (ii) Extra 10% surge protection device 10 KV (external) of total fittings are to be supplied on free of cost basic to Deptt. (iii) 2 year guarantee/ warranty certificate will be provided by OEM and same has to be verified from company Head Office. (iv) All cost of 3rd party testing and relevant tests will be borne by bidder and all relevant test certificates shall be provided free of cost by the bidder to the inspecting officer at the time of inspection. (v) The LED fitting must be supplied from the same lot which has been offered for pre-dispatch inspection/ testing. The bidder of LED lights fittings will offer the LED lights fittings for pre dispatech inspection/testing at supplier works. Sample for 3rd party testing will be randomly taken from pre-dispatch inspection lot. (vi) Before placing the order of fittings, the contractor has to submit the fitting installation plan / drawings to maintain 1000 Lux level through out the court area.

Supply erection of 6mm rope ( S S) better quality with 2 Nos U shape hook, nut bolt with washer, clamp for erection of 6mm rope for erection of LED fitting 150 watt in existing ceiling including holing in existing MS angle / MS channel complete in all respect to the entire satisfaction of Engineer-in-Charge.

Dismantling & credit of old fitting 2x150/ 2x250 watt/2x400watt with choke and lamp from existing ceiling complete to the entire satisfaction of Engineer-in-Charge.

Dismantling & credit of old fitting 2'x2' (2x36 watt) with PLL 4 Pin from existing ceilling complete to the entire satisfaction of Engineer-in-Charge.

Credit of all type of scraps i.e. PVC pipe, copper wire,conduit pipe, M.S box and other E.I Scraps complete to the entire satisfaction of Engineer-in-Charge.