Maharaja Agrasen Medical College Tender
... More
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 11,30,000Document Cost
₹ 20,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_HRY_202637_1Bid Award Id
ViewTender No
MAMC/Engg./02 dated 04-01-2022Tender Authority
Maharaja Agrasen Medical College ViewPurchaser Address
-Website
http://https://www.mamc.edu.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. (HSR 4.32)
2533
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. (HSR 4.31)
All kinds of soil (HSR 4.31.1)
710.2
-
-
... More
Providing and injecting chemical emulsion for PRE- CONSTRUCTIONAL anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, along with the external perimeter of building, expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured) using Chlorpyriphos/ Lindane mollifiable concentrate of 20% (HSR 4.39)
2336
-
-
... More
Supplying and filling in plinth with sand (conforming to zone-IV, IS 1542) under floors, including watering, ramming, consolidating and dressing complete (HSR 10.2)
350.4
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: Note :- this item is also include the Cement Concrete filling in all around of MS pressed steel frame or wherever required as per direction by Architect / Client (HSR 6.1) 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size) (HSR 6.1.2)
65.6
-
-
... More
1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) (HSR 6.1.6)
402.3
-
-
... More
Making plinth protection 50mm thick of cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (HSR 6.13)
775.5
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for (HSR 6.30)
Foundations, footings, bases of columns, etc. for mass concrete (HSR 6.30.1)
647.7
-
-
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (HSR 6.30.2)
573.6
-
-
... More
Suspended floors, roofs, landings, balconies and access platform (HSR 6.30.3)
1483.3
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilever (HSR 6.30.5)
1776.1
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts (HSR 6.30.6)
1228.9
-
-
... More
Stairs, (excluding landings) except spiral-staircases (HSR 6.30.7)
106.5
-
-
... More
Spiral staircases (including landing) (HSR 6.30.8)
40.4
-
-
... More
Edges of slabs and breaks in floors and walls (HSR 6.30.16)
Under 20cm wide (HSR 6.30.16.1)
1136
-
-
... More
Above 20 cm wide (HSR 6.30.16.2)
150
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). (HSR 6.25) All works up to plinth level (HSR 6.25.1)
695.4
-
-
... More
All works above plinth level up to floor IV level (HSR 6.25.2)
554
-
-
... More
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints,
spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level
Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings,
welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be
included in the rates for reinforcement. (HSR 6.33)
Thermo-Mechanically Treated bars of grade Fe-500D
or more (HSR 6.33.6)
73021.7
-
-
... More
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints,
spacer bars, chairs, stays, hangers and annealed steel wire etc.
complete in all respect above plinth level. Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings,
welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be
included in the rates for reinforcement. (HSR 6.34)
Thermo-Mechanically Treated bars of grade Fe-500D
or more (HSR 6.34.6)
58170
-
-
... More
Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: (HSR 7.21)
Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.21.2)
53.5
-
-
... More
Brick work with common burnt clay non-modular bricks of class
designation 7 .5 in superstructure above plinth level up to floor IV
level in all shapes and sizes in : (HSR 7.22) Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.22.2)
682.6
-
-
... More
Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. (HSR 7.28)
ement mortar 1:3 (1 cement :3 coarse sand) (HSR 7.28.1)
166.3
-
-
... More
Cement mortar 1 :4 ( 1 cement :4 coarse sand) (HSR 7.28.2)
30
-
-
... More
Extra for providing and placing in position 2 Nos. 6 mm dia. M.S. bars at every third course of half brick masonry (HSR 7.30)
166.3
-
-
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mrn/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-inCharge. (The payment of RCC Bend (M15 Conc.) Shall be also Include this Item & Payment of reinforcement Shall be paid in Steel reinforcement item) . (HSR 7.51)
5
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished / Lappato finished / Flamed , machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (HSR 8.26)
Granite of any colour and shade (HSR 8.26.2)
Area of slab up to 0.50 sqm (HSR 8.26.2.1)
30
-
-
... More
Area of slab over 0.50 sqm (HSR 8.26.2.2)
65
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (HSR 8.27)
Granite work (HSR 8.27.2)
634
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (HSR 8.28)
27
-
-
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (HSR 8.5)
150
-
-
... More
Providing and fixing dry cladding up to any height & Lvl with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size up to 1mx1m or 1.1m x .6 m or as per architectural drawings fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Note :- this item is also include the V groove at the corner junction of Stone in vertical / Horizontal position as per detail & Design in drawings nothing to be paid extra (HSR 8.1)
Red sand stone - 30mm thick gang saw cut stone. (HSR 8.1.1)
1241.4
-
-
... More
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of MS base plate 200 x 200 x 10 mm or as per Specified by architect / Client or M.S. brackets/ lugs of angle iron/ flats/ with the help of M10 bolt ( Min 4no's bolt per plate) etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1 :2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners / Mechanical bolt on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). (HSR 8.2)
5467.3
-
-
... More
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Architect / Engineer-in-charge. Thickness & Design of SS clamp as per detail & Design in drawings. (HSR 8.3)
2662.9
-
-
... More
Providing and fixing of 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1 :5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1 :2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. (HSR 10.41)
Red sand stone (HSR 10.41.01)
222.9
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (HSR 12.37)
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (HSR 12.37.1)
94.6
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). (HSR 12.39)
94.6
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (HSR 12.12)
1.0 mm thick (HSR 12.12.2)
189.1
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (HSR 12.171)
43.2
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (HSR 12.98)
250X16 mm (HSR 12.98.2)
50
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (HSR 12.99)
200X10 mm (HSR 12.99.3)
50
-
-
... More
150x10mm (HSR 12.99.4)
50
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (HSR 12.102)
125mm (HSR 12.102.1)
20
-
-
... More
100 mm (HSR 12.102.2)
20
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (HSR 12.103)
Twin rubber stropper (HSR 12.103.2)
20
-
-
... More
Providing and fixing aluminium casement stays, ISI marked, anodised transparent or dyed to required colour and shade or powder coated or polyester powder coated, with necessary screws etc. complete. (HSR 12.104)
Anodized (AC-10) Aluminium (HSR 12.104.1)
20
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. (HSR 12.105)
20
-
-
... More
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws (HSR 12.32)
35 mm thick shutters (HSR 12.32.1)
With ISI marked stainless steel butt hinges of required size (HSR 12.32.1.2)
Second class teak wood (HSR 12.32.1.2.1)
25
-
-
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 5 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (HSR 12.10)
Second class teak wood (HSR 12.10.1)
35 mm thick (HSR 12.10.1.1)
25
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (HSR 22.210)
Rectangular shape 1500x450 mm (HSR 22.210.4)
30
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : (HSR 12.157)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) (HSR 12.157.2)
Powder coated aluminium (minimum thickness of powder coating 50 micron) (HSR 12.157.2.2)
1800
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (HSR 12.158)
Pre-laminated particle board with decorative lamination on both sides (HSR 12.158.2)
23.9
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (HSR 12.159)
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (HSR 12.159.2)
23.9
-
-
... More
With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) (HSR 12.159.4)
239
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (HSR 13.28)
27300.6
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (HSR 13.3)
Profile C (HSR 13.3.2)
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (HSR 13.3.2.1)
212.2
-
-
... More
Profile E (HSR 13.3.3)
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (HSR 13.3.3.2)
20
-
-
... More
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. (HSR 13.5)
10 X 120 mm (HSR 13.5.3)
850
-
-
... More
10 x 160 mm (HSR 13.5.5)
450
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (HSR 13.29)
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (HSR 13.29.2)
100
-
-
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (HSR 13.42)
M.S. tube (HSR 13.42.1)
768.1
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (HSR 13.41)
50
-
-
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). (HSR 13.8)
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.8.2)
50
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. This Item is Also Include the Skirting ( 100 mm height). Epoxy grout will be paid extra Floor & Wall Tiles (HSR 10.63)
Size of Tile 600x600 mm (HSR 10.63.2)
884.4
-
-
... More
Size of Tile 800x800 mm (HSR 10.63.3)
20
-
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.58)
662.1
-
-
... More
Deduct for not using 20 mm thick cement mortar 1 :4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm (HSR 10.64)
1546.4
-
-
... More
Providing and fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Adhesive make Kerakoll biotile / Bioflex or eqv. (HSR 10.65)
1546.4
-
-
... More
Grouting the joints of flooring tiles having joints of 3 mm width & 10 mm deep or upto tile / Granite thickness, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge (HSR 10.70)
Size of Tile 600x600 mm ( Make Kerakoll or Equivalent or as per selection by Architect / Client) (HSR 10.70.2)
2070.3
-
-
... More
Size of Tile 800x800 mm (HSR 10.70.3)
20
-
-
... More
Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) : (HSR 10.37)
25 mm thick (HSR 10.37.1)
418
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab laid on 5 to 7 mm thick Tile adhesive and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc.
all complete as specified and as directed by the Engineer-in-Charge. (HSR 10.50)
Polished / Lappato finished / Flamed Granite stone slab. (HSR 10.50.1)
383.4
-
-
... More
Providing and laying of 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1 :2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening ( Sika make or Eqv.) compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. (HSR 10.11)
1085
-
-
... More
Providing and fixing glass strips in joints of terrazzo/ cement concrete floors (HSR 10.22)
40 mm wide and 4 mm thick (HSR 10.22.01)
1150
-
-
... More
Providing gola 75x75 mm in cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design : (HSR 9.17)
In 75 x75 mm deep chase (HSR 9.17.1)
412
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (HSR 9.18)
90
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charae but excluding the cost of oaintina with (HSR 9.46)
12.5 mm thick tapered edge gypsum moisture resistant board (HSR 9.46.3)
440
-
-
... More
Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 (HSR 9.46.4)
50
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm hick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (HSR 9.47)
GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fibre acoustical fleece. Make Design Deo, Goraya Buildtech or eqv. (HSR 9.47.2)
500.7
-
-
... More
10 mm thick cement plaster (HSR 11.4)
1 :3 (1 cement: 3 fine sand) (HSR 11.4.2)
1992
-
-
... More
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per litre respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. (HSR 11.46)
442.5
-
-
... More
12 mm cement plaster of mix : (HSR 11.50
1 :4 (1 cement: 4 fine sand) (HSR 11.5.3)
5156.9
-
-
... More
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. . ( this item Will also include water Proof Chemical ( Sika & Dr. Fixit or equivalent) in outer plaster layer) (HSR 11.14)
730
-
-
... More
Pointing on brick work or brick flooring with cement mortar 1 :3 (1 cement : 3 fine sand): (HSR 11.25)
Raised and cut pointing (HSR 11.25.2)
100
-
-
... More
Providing and applying two coats white cement based putty of approved brand and manufacturer e.g. J.k., Asian, Birla putty etc. or any equivalent, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (HSR 11.58)
5886.9
-
-
... More
Finishing with Deluxe Multi surface Emulsion paint system for interiors and exteriors using Primer as per manufacturers specifications: (HSR 11.97)
Two or more coats applied on walls @ 1.25 litre/10 sqm over and including one coat of Special primer applied @ 0. 75 litre /10 sqm (HSR 11.91.1)
7148
-
-
... More
Painting the wooden or metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade (HSR 11.82)
Two or more coats on new work (HSR 11.82.1)
2499.4
-
-
... More
Finishing walls with textured exterior paint of required shade (HSR 11.94)
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (HSR 11.94.1)
1130
-
-
... More
Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge. (HSR 11.17)
773.5
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. (HSR 11.73) On concrete work (HSR 11.73.2)
50
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement sluny mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/ sqm This layer will be allowed to air cure for 4 hours.
(b) Second layer of sluny of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints corners, junctions of pipes and masonry with polymer mixed slurry. (HSR 28.15)
458.5
-
-
... More
Providing and laying integral cement based water proofing treatment
including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement
admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls up to 300mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1 :5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1 :5 (1cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls up to 300 mm height including rounding of junctions of walls and slabs. (HSR 28.17) (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1 :4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. "All above operations to be done in order and as directed and specified by the Engineer-in-Charge:
With average thickness of 120 mm and minimum thickness at sqm khurra as 65 mm. (HSR 28.17.1)
1730
-
-
... More
Core cutting in Roof for Toilet Purpose as per Direction of Architect /client Core cutting up to 200mm RCC slab-100mm dia (HSR PH229)
5
-
-
... More
Core cutting up to 200mm RCC slab-125mm dia (HSR PH230)
5
-
-
... More
Core cutting up to 200mm RCC slab-150mm dia (HSR PH231)
5
-
-
... More
Core cutting up to 200mm RCC slab -175mm dia (HSR PH232)
5
-
-
... More
Granular Sub-Base (Mix in place) Construction of granular sub-base by providing
Material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in
place method with Rotavator at OMC, and compacting with vibratory roller to achieve the
desired density, complete as per technical clause 401 of MORT&H technical specifications (HSR 17.13)
81
-
-
... More
Dry Lean Cement Concrete Sub- base
Construction of dry lean cement concrete Subbase over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15: 1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing, as per clause 601 of MORT&H specifications Note:- Quantity provided for aggregate is for
estimating purpose. Exact quantity shall be as per mix design. (HSR 17.44)
40.5
-
-
... More
Cast in Situ Cement Concrete M 20 Kerb with Channel Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade
PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in
PCCM20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine,
foundation concrete laid manually, all complete as per clause 408 (HSR 34.2)
Using Concrete Mixer (HSR 34.2.1)
220
-
-
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (HSR 10.76)
370
-
-
... More
Outer jali Providing & Fixing Stone jali 25 - 30 mm thick Gwaliorment stone with sand blasted finish CNC cut ( average 60 to 70 % perforation) on MS base frame base frame finish with epoxy paint as detail by arch. / client (Structural steel frame shall be paid in Structure Steel item (Under Chapter Steel & Iron work HSR Code 13.28 ) (NS)
White Sand Stone (NS)
90
-
-
... More
Providing & Applying Silicon Coating upto all height & levels as per Following Procedure Cleaning of exterior exposed Sand Stone Work surface by water jet for removal of Any existing fungus / Stain / Buffing or efflorescence has to be removed by wire brushing if any presence. After complete inspection on clean dry surface application of KERAKOVER METEOR S will be applied by spraying till saturation or min 2-3 coats . (NS) Make - Kerakoll ( KERAKOVER METEOR S IS A PENETRATING SEALERS ) or equivalent. (NS)
Any Color sand stone (NS)
1554.3
-
-
... More
Providing & Fixing wooden door SS fittings like Door Closer , Door handle , Tower bolt as per arch./ client Requirement. (Make Ozone , Haffele, Dorma, Godrej or equivalent etc.) (NS)
44
-
-
... More
Extra for providing 3M or eqv. Brand frosted Film In Existing glass in doors, windows& clerestory windows, shutters (NS)
30
-
-
... More
Providing and fixing Toilet Cubical Make Merino Or Equivalent MODLE TYPE - SS SERIES Thickness of Compact Laminate : 12 mm
Color of HPL Boards: Single Colour
Size of Cubicle : Party Fixed & partly openable
Door Size : 750mm (H) x 610mm (W)
Divider Size: 1775mm (H)
Overall Height Of Cubicle : 2003 mm (Including bottom Gap of 150mm)
Accessories: Standard – Merino Make or Equivalent Aluminium, ss Polyamide 6 accessories Using
a) SS “U” Channel
b) SS “F” channel
c) SS Door Stopper Channel
d) SS Top Rail
e) ss Coat Hook
f) ss Privacy Thumb turn c/w Occupancy Indicator
g) ss Door Knob
h) ss Hinges – Gravity to close
i) ss Adjustable Foot
j) Rubber Door Stopper Lining
k) S.S.Screws 304 G & P.V.C Wall Plugs Complete as per pattren of Existing building name Para Medical Toilet Block Measurement Shall be Floor to top height (NS)
100
-
-
... More
MOLDO SPORTS INTERLOCKING RUBBER TILES (15mm )
For GYM
Supply and Application of MOLDO interlocking Rubber Tiles made of High quality 100% recycled crumbed SBR mixed with resin binder which comes in size of 500mmx500mm per tile with tensile elongation of 2.0 ; Elongation at break @200% ; Hardness Shore A @60-70; Specific Gravity @1.08 ; Abrasion Loss per Cubic Meter (Din – 53516) @134 with Multi Color option (Blue , Black , Green , Terracotta red ) Make: MOLDO SPORTS (NS)
262
-
-
... More
MOLDO SPORTS DURABOND PVC CUSHION INDOOR SPORTS FLOORING For Indoor BASKETBALL Courts (4.5mm)
Supply and application of vinyl Cushion Indoor Sports flooring of 4.5mm thick with 1.5mm wear layer comes in roll size of (1.8m x 15m) available in different Color options. Moldo PVC Cushion Indoor Sports flooring comes with l Indentation Resistance of less than 0.5 and also have good Abration & Impact Resistance .It also have better shock absorption property of more than 35 and good ball Rebounce property of about 98%.. Installation With Seamless Thermo Welding of joints and Game line marking (Inclusive of all accessories). Make: MOLDO SPORTS (NS)
835
-
-
... More
Providing & Fixing Aluminium Skirting in Gym Area 2mm thk & 75 mm height ( 2end cap & gasket) With 8 mm thk Water proof ply complete with all respect as per direction Architect / Client. (NS)
270
-
-
... More
Providing and fixing of Puff panel / Sandwich Panel Sheet Double Skin insulated Roof System (External : JSW Colouron plus / tata Dura shine sheet . Internal : HI-RIB JSW / Tata / JSW coloron sheet) Insulated roofing system comprising external sheet of profiled sheeting 406 mm cover width, 41 mm crests @ 203 mm c/c manufactured out of 0.58 mm TCT (total coated thickness) SMP coated (275 Mpa yield stress) steel. The sheet shall have wide pans with stiffening ribs for effective water shedding and special male/ female ends on side-laps for purlin support and anti-capillary flute in side lap and Anti-Siphoning feature to prevent leakages. The sheet shall have a hot-dip metallic coating of zinc aluminium alloy coating mass total of both sides, AZ-150 as per AS-1397 ) having 275 Mpa yield stress. The sheet shall be coated with exterior coat of Silicon Modified Polyester paint, 20 microns top coat applied over 5 micron primer and conversion coat and a 5 micron polyester back coat. The external sheets shall be fixed to G.I sub-girts with clips and no fasteners to penetrate the sheeting. The clip should lock over the male rib and into the underside of the centre and female ribs and shall be fastened to support with wafer-head self-drilling zinc-coated fasteners. (NS)
The internal sheeting shall be Hi-Rib profiled sheets manufactured out of 0.50 mm TCT (150gsm, zinc aluminium alloy coating mass total of both sides,AZ-150 as per AS-1397 ) having 550 Mpa yield strength. The sheet shall be coated with exterior coat of Silicon Modified Polyester paint, 20 microns top coat applied over 5 micron primer and conversion coat and a 5 micron polyester back coat. The sheets shall have 1020 mm cover width, 28-30 mm high crests at 250 mm wide pans with special male/female side-laps and anti-siphoning feature to prevent leakages. The pan shall be stiffened by using 3 small ribs. The Sub-Girts Of LYSAGHT Zed-plus ( 90 degree lip) Purlin Size 152mm X 65 mm X 61 mm X 1.5 mm or Manufactured Out of 18(G) G.I. ‘ Z ’ Shape would be fixed to Inner liner on face Side at Purlin Locations by means of Galvanised Self Drilling self tapping fasteners thru the crest. An Insulation of 50mm thick glass wool insulation16 Kg/M3 - Density wrapped in polythene bags shall be laid over the internal sheeting and G.I. sub girts are held between the external and internal sheets. This item is Also Include the Trimdeck (Top) / Insulation / Vapour barrier / Trimdeck Linear ( bottom Sheet) / Sub purlin/ Sag rod / Z purlin (roof purlin) / Ridge Sheet / Flashing / Eve board / Cleat etc. as per Specified & Approved Sample by Architect / Client & all Lap Slices , Bolts complete in all respect. nothing to be paid extra. Make :- JSW / Tata (NS)
1065
-
-
... More
Supply & Fixing of JSW COLORON / Tata BlueScope profile sheet of 1072 mm Supply width and nominal 28.5 mm deep ribs / or as per approved .The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.50 mm Base Metal Thickness (BMT), Hi-Tensile steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc). The paint will have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior coat on top surface and nominal 5 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by concern authority using self drilling/ self tapping screws complete. This item is also include the Flashing / ridge / eve Board including / Bolts in all respect nothing to be paid extra. This item is also include the 50 mm thick Resin Bonded Rockwool 48 kg/m4 as directed by architect / Client. (NS) In roofing/ceiling / wall or as specified by architect / Client. (NS)
914
-
-
... More
Eccoboard Polyester fiber Acoustical Wall Panels
Providing And Fixing Of Acoustical Wall Panels With Acoustical Properties Made Of 100 % Polyester Fiber With A Thickness Of 9 mm with NRC of 0.56 on direct pasting on wall and density of 193 Kg per cubic meter , Should Be A Homogeneous Material With So Many Colour Options (Free Colour / Solid Colour) As Per The Choice Of The Architect/ Person In Charge Of Size 2440 Mm X 1220 mm Can Be Cut In To Any Sizes For E.G. Like 600mm * 600mm / 600mm * 1200 Mm / 1200 Mm * 1200mm As Per Client Requirement., Product Shall Not Burn Of Its Own In Order To Achieves The Highest Stringent Fire Ratings 25 ( A Grade ) ASTM – E84., Should Be Weather Resistance With Anti Fungal Properties, Thermal Insulation. Should Be Easy To Install With The Help Of self melting fiber bonding Adhesive. (NS)
Make: Eccoboard or Eqv. (NS)
763.5
-
-
... More
Providing & Applying Terrace Water proofing with Following Procedure Surface Preparation Cleaning of the exposed concrete slab and repairing the surface irregularities like cracks, potholes, as per manufacturers method statement .Main Water Proofing on Concrete Roof .Supply and apply acrylic based waterproofing and heat
ref lecting system having following key performance properties: 1.Acrylic polymer dispersion single component liquid applied system 2.Fully reinforced with glass fiber reinforced Sika Fab® 1 3.The roofing system should be compatible with Bitumen The installation company of roofing system should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the roofing manufacturer can only be used with official approval from manufacturer.
System:
Providing and applying primer over the prepared surface with Sika floor 161 HC Primer , Coverage: 0.8 kg/m2 First coat: Sika Cool Coat , Consumption: 0.5 kg/m2.
Reinforcement: SikaFab 1 , Second coat: Sika Cool Coat Consumption : 0.5 kg/m2. , Third coat: Sika Cool Coat Consumption: 0.5 kg/m2 0.7 Kgs/m2 to 0.8 kgs/m2. The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof. The Contractor shall be submitted the Guarantee certificate of Minimum 05 year on their letter head for Guarantee. ( NS )
30
-
-
... More
Top Coat : Screed on Above waterproofing
Providing and applying Sikadur-31 IN, a solvent-free, moisture tolerant, thixotropic, two part structural adhesive
and repair mortar, based on epoxy resins and special f illers. The epoxy adhesive and repair mortar should conform to ASTM C 881, Type I, Grade 3, Class B+C. Mixed Density should be ~1.80 ± 0.01 kg/l at 30°C and on vertical surfaces it should be non-sag up to 10 mm thickness, according to FIP 5.3 with measurement according to ASTM D2730. The material should exhibit following minimum properties: Compressive Strength according to ASTM C-579 at +30°C in 1 day ≥ 45 N/mm2 , in 3 days ≥ 50 N/mm2, in 7 days ≥ 55 N/mm2, in 14 days ≥ 60 N/mm2; Tensile adhesion strength according to ASTM C 882 at +30°C f or dry concrete, in 7 days ≥ 10 N/mm2; Flexural Strength according to DIN EN 196 at +30°C, in 1 day ≥ 10 N/mm2, in 3 days ≥ 15 N/mm2, in 7 days ≥ 20 N/mm2, in 14 days ≥ 25 N/mm2; Tensile strength according to ISO 527 at +30°C,in 3 days ≥ 5 N/mm2, in 7 days ≥ 8 N/mm2. Consumption of the material will depend on the area of application, for bonding applications the consumption should be around 0.7 Kgs/m2 to 0.8 kgs/m2. The manufacturer must be an ISO 9001 & 14001 certify ied and valid certificates must be produced as proof minimum thk 2 mm or as per manufacturer. Make - Sika (NS)
30
-
-
... More
Providing and laying broken AAC Block in sunken portion of W.C. & kitchen. These broken Block mixed with cement mortar 1:8 ( 1 cement : 8 coarse sand) laid and compacted properly including supply of labour, material, and tools and plant etc. as per instruction of Engineer-in-charge. (NS)
18.9
-
-
... More
Providing & Fixing Outer & Inner building Signage as per Following Procedure / Specification SS Steel (304 grade ) box Letter Osram LED Module 2 Year Guarantee & Power Supply 1 year guarantee 300 mm Height ( 12'' ) Per Letter ( Only inch height is measured for payment) (NS)
180
-
-
... More
450 mm Height ( 18'' ) Per Letter ( Only inch height is measured for payment) (NS)
270
-
-
... More
600 mm Height ( 24'' ) Per Letter ( Only inch height is measured for payment) (NS)
360
-
-
... More
LED Exit Sign ( 12 '' x 6 '') ( Only inch height is measured for payment) (NS)
15
-
-
... More
Providing & Fixing Aluminium Louver door / Window in Toilet area or as Specified by Client / Architect with powder Coating as Direction by Architect / Client including Frame in all respect. (NS)
20
-
-
... More
Public Health work items
Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing &
fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into
the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and
gasket etc complete. (HSR-22.33)
22
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass
single hole basin mixer of approved quality and make, including painting of
fittings and brackets, cutting and making good the walls wherever required:- (HSR-22.02) White Vitreous China Wash basin size 550x400 mm with a
15 mm C.P. brass single hole basin mixer. (HSR-22.02.01)
27
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality &make and as per the direction of Engineer-in-charge. (HSR-22.15)
27
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 150 mm diameter (HSR-22.102.02)
8
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
waste fittings complete.(HSR-22.14) Semi rigid pipe (HSR-22.14.1) 32 mm dia (HSR-22.14.1.1)
4
-
-
... More
40 mm dia (HSR-22.14.1.2)
29
-
-
... More
Providing and fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (HSR-22.46)
8
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :(HSR-22.10) Kitchen sink with drain board(HSR-22.10.1) 510x1040 mm bowl depth 250mm (HSR-22.10.1.1)
1
-
-
... More
Providing and fixing 40mm i/d chromium plated trap with chromium plated pipe to wall with walflange completed for use with sinks (HSR-22.17) With Bottle Trap (Indian make) (HSR-22.17.1)
1
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to
wooden cleats with C.P. brass screws and washers complete. (HSR-22.209)
27
-
-
... More
Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P. brass screws and rawl plugs etc. complete including
cutting and making good the walls etc.(HSR-22.212) Tree way (HSR-22.212.1.3)
22
-
-
... More
Providing and fixing in position best Indian make C.P. brass Tumbler cum Tooth Brash holder fixed in with rawl plugs with C.P. brass screws and
complete including cutting and making good the walls etc. (HSR-22.214)
22
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to
IS:8931: (HSR-22.104) 15 mm nominal bore (HSR-22.104.1)
22
-
-
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.(HSR-22.105) 15 mm nominal bore (HSR-22.105.1)
5
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms. (HSR-22.106) 15 mm nominal bore (HSR-22.106.1)
4
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(HSR-22.107) 15 mm nominal bore (HSR-22.107.1)
4
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points
of approved quality conforming to IS:8931. (HSR-22.108) 15 mm nominal bore (HSR-22.108.1)
60
-
-
... More
Providing and fixing toilet paper holder: (HSR-22.42) C.P. brass (HSR-22.42.1)
22
-
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,
weighing not less than 106 gms. (HSR-22.127)
22
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same
materials with snap fittings of approved quality and colour, weighing not less
than 105 gms. (HSR-22.117)
22
-
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed
fittings arrangement of approved quality and colour, weighing not less than 88 gms. (HSR-22.118)
22
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden
cleats with CP brass screws with concealed fittings arrangement of approved
quality and colour. (HSR-22.119) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (HSR-22.119.2)
12
-
-
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C.pan. (HSR-22.35)
22
-
-
... More
Providing and fixing in position best Indian make (to the approval of the
engineer-in-charge) storage type automatic electric water heater,
pressure/non-pressure type thermostatically controlled, suitable for operation
on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw
able and adjustable type AC, thermostat. Thermostat knob to be readily
accessible through the opening of suitable cover for and adjustment of
temperature in the installed position of heater and the thermostat should be
withdrawn without having to drain the water, electric heating element made
out of copper tube (heating element should be easily removed and replaced
in the installed position of heater) A neon indicator 1 AMP, inner container
made out of copper tinned both from inside and outside, outer container
made out of mild steel sheet finished in gleaming white stove enamel paint,
insulated between the inner and outer with fibre glass wool with 1 metre
length of suitable capacity 3 core flexible cord with plug and non return valve
plastic/lead connections or pressure release valve (where required).
Complete including fixing and testing for a week (as required by Engineer-incharge. (HSR-22.216) 25 litres capacity. (HSR-22.216.1)
10
-
-
... More
SECTION B -WATER SUPPLY Pipes and fittings Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(HSR-22.85) Internal work-Exposed on wall / Terrace 25mm dia. nominal outer dia pipe (HSR-22.85.3)
60
-
-
... More
32mm dia. nominal outer dia pipe (HSR-22.85.4)
81
-
-
... More
40mm dia. nominal outer dia pipe (HSR-22.85.5)
60
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (HSR-22.87) External work 25mm dia. nominal outer dia pipe (HSR-22.87.3)
25
-
-
... More
32mm dia. nominal outer dia pipe (HSR-22.87.4)
55
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(HSR-22.86) Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes (HSR-22.86.1)
60
-
-
... More
20mm dia. nominal outer dia pipe (HSR-22.86.2)
200
-
-
... More
25mm dia. nominal outer dia pipe (HSR-22.86.3)
57
-
-
... More
32mm dia. nominal outer dia pipe (HSR-22.86.4)
25
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end )(HSR-22.98) 25 mm nominal bore (HSR-22.98.1)
21
-
-
... More
20 mm nominal bore (HSR-22.98.2)
3
-
-
... More
32 mm nominal bore (HSR-22.98.3)
9
-
-
... More
40 mm nominal bore (HSR-22.98.4)
6
-
-
... More
Providing and fixing ball valve (brass) of approved quality,High or low pressure, with plastic flots complete: (HSR-22.103) 25 mm nominal bore (HSR-22.103.3)
20
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1 :4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1 :2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1 :5:10 ( 1
cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design:(HSR-22.173) With common burnt clay non-modular bricks of class designation 7.5 (HSR-22.173.1)
3
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR-22.181)
16000
-
-
... More
SECTION C. SOIL, WASTE & VENT PIPES Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. (HSR-22.222) Single Socket Type B (HSR-22.222.2) 110mm old SWR uPVC pipe lines laid complete (HSR-22.222.2.2)
335
-
-
... More
Providing and fixing G.I. waste pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls/floor etc. (HSR-22.88) 40 mm dia nominal bore (HSR-22.88.5)
65
-
-
... More
50 mm dia nominal bore (HSR-22.88.6)
30
-
-
... More
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x50 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4Nos., 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1 .6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.(HSR-22.54) Total bracket length 580 mm of approved shape and design ( for single 100 mm dia pipe) (HSR-22.54.1)
86
-
-
... More
Providing and fixing SWR uPVC Plain bend of required degree (6KG/Cm2) complete in all respect. NS 110mm dia
38
-
-
... More
Providing and fixing SWR uPVC heel rest sanitary bend (6KG/Cm2) complete in all respect. NS 110mm dia
18
-
-
... More
Providing and fixing SWR uPVC single equal plain junction of reqd. degree. NS 110x110x110mm
41
-
-
... More
Provinding and fixing SWR uPVC terminal guard. NS 110mm
18
-
-
... More
Providing and fixing SWR uPVC collar. NS 110mm
69
-
-
... More
Providing & fixing uPVC trap of self cleansing design with screwed down of hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: NS 110 mm inlet and 110 mm outlet.
29
-
-
... More
SECTION D-RAIN WATER PIPES Providing and fixing on wall face Unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(HSR-9.57) 75 mm diameter (HSR-9.57.1)
60
-
-
... More
110 mm diameter (HSR-9.57.2)
220
-
-
... More
150 mm diameter (HSR-9.57.3)
74
-
-
... More
Providing and fixing on wall face Unplasticised - PVC moulded fittings/
accessories for Unplasticised Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring conforming to IS : 5382,
leaving 1 O mm gap for thermal expansion. (HSR-9.58) Coupler (HSR-9.58.1) 75 mm diameter (HSR-9.58.1.1)
10
-
-
... More
110 mm diameter (HSR-9.58.1.2)
95
-
-
... More
150 mm diameter (HSR-9.58.1.3)
8
-
-
... More
Single tee without door (HSR-9.58.4) 75x75x75 mm (HSR-9.58.4.1)
8
-
-
... More
Shoe (Plain) (HSR-9.58.6) 75 mm Shoe (HSR-9.58.6.1)
8
-
-
... More
110 mm Shoe (HSR-9.58.6.2)
30
-
-
... More
150 mm Shoe (HSR-9.58.6.3)
4
-
-
... More
Providing and fixing Unplasticised -PVC pipe clips of approved design to
Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood
plugs, screwed with M.S. screws of required length, including cutting brick
work and fixing in cement mortar 1 :4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (HSR-9.59) 75 mm (HSR-9.59.1)
12
-
-
... More
110 mm (HSR-9.59.2)
65
-
-
... More
150 mm (HSR-9.59.3)
10
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 grams. (HSR-9.60)
42
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cementconcrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (HSR-9.18)
30
-
-
... More
House outlet, connection induding cutting and forming pamalas and making khurras at head of house connection size of each khura to be not less than 30 cm x 30 cm. The rate shall cover the cost of all works to the
requirements of the Engineer-in-charge. (HSR-21.49)
8
-
-
... More
SECTION E- SEWERAGE SYSTEM Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff
mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand)
including testing of joints etc. complete: (HSR-22.163) 100 mm dia (HSR-22.163.1)
20
-
-
... More
150 mm dia (HSR-22.163.2)
20
-
-
... More
250 mm diameter (HSR-22.163.4)
120
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10
graded stone aggregate 40 mm nominal size) all-round S.W. pipes including
bed concrete as per standard design (HSR-22.164) 100 mm diameter S.W. pipe (HSR-22.164.1)
20
-
-
... More
150 mm diameter S.W. pipe (HSR-22.164.2)
20
-
-
... More
250 mm diameter S.W. pipe (HSR-22.164.4)
120
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (HSR-22.166) 150 x 100 mm size P type (HSR-22.166.2) With common burnt clay non-modular bricks of class designation 7 .5 (HSR-22.166.2.1)
11
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with
collars jointed with stiff mixture of cement mortar in the proportion of 1: 2 (1
cement: 2 fine sand) including testing of joints etc. complete: (HSR-22.168) 150 mm dia. R.C.C. pipe (HSR-22.168.2)
20
-
-
... More
250 mm dia. R.C.C. pipe (HSR-22.168.3)
165
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design. (HSR-22.164) 150 mm diameter pipe (HSR-22.164.2)
20
-
-
... More
250 mm diameter pipe (HSR-22.164.4)
165
-
-
... More
Constructing brick masonry manhole in cement mortar 1 :4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1 :1.5:3 mix (1 cement : 1.5 coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1 :4:8 mix (1 cement : 4 coarse sand (Zone-Ill) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1 :3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : (HSR-22.19) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) (HSR-22.190.1) With common burnt clay non-modular bricks of class designation 7 .5. (HSR-22.190.1.1)
13
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) (HSR-22.190.2) With common burnt clay non-modular bricks of class designation 7 .5. (HSR-22.190.2.1)
2
-
-
... More
Extra for depth for manholes : (HSR-22.191) Size 90x80 cm (HSR-22.191.1) With common burnt clay non-modular bricks of class designation 7 .5. (HSR-22.191.1.1)
1
-
-
... More
Size 120x90 cm (HSR-22.191.2) With common burnt clay non-modular bricks of class designation 7 .5. (HSR-22.191.2.1)
0.5
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x1 O cm cement concrete blocks 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : (HSR-22.198) With 20x20 mm square bar (HSR-22.198.1)
22
-
-
... More
SECTION F- STORM WATER DRAINAGE SYSTEM Constructing brick masonry road gully chamber 50x45x60 cm with bricks in
cement mortar 1 :4 (1 cement : 4 coarse sand) including 500x450 mm pre
cast R.C.C. horizontal grating with frame complete as per standard design : (HSR-22.205) With common burnt clay non-modular bricks of class designation 7.5 (HSR-22.205.1)
23
-
-
... More
Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks
in cement mortar 1 :4 (1 cement : 4 coarse sand) including 500x450 mm
precast R.C.C. horizontal grating with frame and vertical grating complete as
per standard design (HSR-22.207) With common burnt clay non-modular bricks of class designation 7.5 (HSR-22.207.1)
4
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with
collars jointed with stiff mixture of cement mortar in the proportion of 1: 2 (1
cement: 2 fine sand) including testing of joints etc. complete: (HSR-22.168) 150 mm dia. R.C.C. pipe (HSR-22.168.2)
35
-
-
... More
250 mm dia. R.C.C. pipe (HSR-22.168.3)
178
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10
graded stone aggregate 40 mm nominal size) all-round S.W. pipes including
bed concrete as per standard design (HSR-22.164) 150 mm diameter pipe (HSR-22.164.2)
35
-
-
... More
250 mm diameter pipe (HSR-22.164.4)
178
-
-
... More
Plumbing NS Items Providing & fixing 15mm C.P. brass single hole wash basin mixer without popup waste system with 450mm long copper pipes and brass nut - Make: Jaquar; Model : CON-169KNB NS
8
-
-
... More
Providing and fixing single lever shower Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges Jaquar make model : CON-219KN NS
8
-
-
... More
Painting G.I pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. 40mm diameter pipe NS
65
-
-
... More
50mm diameter pipe NS
30
-
-
... More
Providing and fixing SS grating of approved quality and colour. Circular type 100mm nominal dia NS
16
-
-
... More
125 mm nominal dia with 25 mm waste hole NS
26
-
-
... More
Making connection of G.I. distribution branch with G.I.main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete. 25 to 40 mm nominal bore. NS
2
-
-
... More
FIRE FIGHTING PUMPS AND EQUIPMENT (ELECTRICAL ITEM)Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head (One working, one stand-by) (N.S.)
2
-
-
... More
SUB HEAD - II (PIPES & ACCESSORIES) Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (N.S.) 80 mm dia (DSR-7.6)
10
-
-
... More
100 mm dia (N.S.)
130
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal (N.S.)
6
-
-
... More
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal (N.S.)
3
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia(N.S.)
6
-
-
... More
100 mm dia (N.S.)
7
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
6
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : (N.S.) 100 mm dia (N.S.)
2
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 100mm dia (N.S.)
1
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Gun Metal (N.S.)
18
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m (N.S.)
5
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun Metal (N.S.)
6
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe (N.S.)
3
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. (N.S.)
1
-
-
... More
Fire Fighting Item NS Items SITC weather proof M.S cabinet size 1200 x 2100 x 600mm Supplying, installation, testing and commissioning of weather proof M.S cabinet size 1200mm x 2100 mm x 600 mm deep fabricated from 1.6 mm thick M.S. sheets and M.S angle 40 mm x 40 mm x 6 mm complete with glass, locking arrangements to accommodate the following: - a. Gunmetal Single Headed Hydrant valve - 1 No. b. Fire Hoses 63mm, 15 M long with accessories - 2 Nos. c. Short branch - 1 No. d. First Aid hose Reel - 1 No. e. Fire Extinguisher - 2 Nos. f. Fireman's Axe - 1 No. g. Pressure Gauge - 1 No. The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade. NS
5
-
-
... More
SITC of Fire Man's axe Supplying, Installation, Testing and Commissioning of standard Fire Man's axe with heavy insulated rubber conforming to IS : 926. NS
5
-
-
... More
Supplying and fixing fire hose box wall mounting type made out of 18 gauge mild steel sheet 750 x 600 x 250mm size, to accmmodate two no 15m length of delivery hose and branch pipe, acrylic fronted single door, with lock, 2 keys and a break glass recess for keys, painted fire red. NS
4
-
-
... More
Supply, installation, testing & commissioning of 100 mm dia Bourden type, Stainless Steel dial type pressure gauge including brass isolation valve and pipe having calibration of 0-16 Kg/cm2. NS
6
-
-
... More
Providing and fixing water based CO2 type extinguishers consisting of welded M.S.cylinderical body, squeeze lever discharge vave 30 cms long high pressure discharge hose, discharge nozzle,suspension braket, ISI marked as per IS:940 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.
Capacity 9 litres. NS
5
-
-
... More
Providing and fixing stored pressure type dry chemical powder (DCP) of fire extinguisher suitable for A,B,C class of fires complete with pressureindicating gauge, cylinder hose, discharge open nozzle, suspension bracket, and externally finished with red enamel paint and fixed to wall with bracketsto wall with brackets.
Capacity 9 Kg. NS
5
-
-
... More
Electrical work itmes
Note: The rates worked out for items 23.1 to 23.7 and their sub-items are by considering recessed conduit wiring. These rates may be reduced by 15% wherever surface conduiting wiring is required to be done as per directions of Engineer-in-Charge. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.. Group A HSR -23.4.1.1
150
-
-
... More
Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch-Group A (secondary light point -(Group point wiring) HSR -23.4.3.1
201
-
-
... More
Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.. Group A HSR -23.4.2.1
5
-
-
... More
Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp
Modular type switch required GI Box ,modular face plate etc complete as required Group A HSR -23.4.4.1
60
-
-
... More
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A HSR -23.4.5.1
72
-
-
... More
Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. HSR -23.3.6 1 run of Size 1.50 Sqmm(1/1.40mm) HSR -23.3.6.1
90
-
-
... More
1 run of Size 2.50 Sqmm(1.1.80mm) (for Circuits) HSR -23.3.6.2
975
-
-
... More
1 run of Size 4 Sqmm(1/2.24mm) (For Geyser and AC) HSR - 23.3.6.3
200
-
-
... More
2 run of Size 1.50 Sqmm(1/1.40mm) HSR -23.3.6.6
60
-
-
... More
2 run of Size 2.50 Sqmm(1.1.80mm) (for Circuits) HSR -23.3.6.7
425
-
-
... More
2 run of Size 4 Sqmm(1/2.24mm) (For Geyser and AC) HSR -23.3.6.8
100
-
-
... More
3 run of Size 1.50 Sqmm(1/1.40mm) HSR -23.3.6.9
60
-
-
... More
3 run of Size 2.50 Sqmm(1.1.80mm) (for Circuits) HSR -23.3.6.10
325
-
-
... More
5 amp Socket (For TV) HSR -23.8.11.4
18
-
-
... More
15 amp 1 way switch (For Geyser and AC) HSR -23.8.11.3
8
-
-
... More
15 amp 6 pin Socket (For Geyser) HSR -23.8.11.5
8
-
-
... More
step type Fan Regulator 2 modules 300 watt HSR -23.8.11.7
46
-
-
... More
Blanking plate HSR -23.8.11.10
49
-
-
... More
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. DSR - 23.8.10 1 & 2 Modules including combined plate for Telephone and data HSR -23.8.10.1
8
-
-
... More
3 Modules HSR -23.8.10.2
26
-
-
... More
4 Modules HSR -23.8.10.3
15
-
-
... More
6 Modules HSR -23.8.10.4
9
-
-
... More
8 Modules HSR -23.8.10.5
12
-
-
... More
12 Modules HSR -23.8.10.6
18
-
-
... More
Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm.long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. HSR -23.8.4
46
-
-
... More
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. HSR -23.8.11 TV Socket outlet modular type HSR -23.8.11.9
9
-
-
... More
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. HSR -23.8.101 & 2 Modules including combined plate for Telephone and data HSR -23.8.10.1
9
-
-
... More
Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. HSR -23.23.8 RG-6 HSR -1.19
225
-
-
... More
Supply and erection of MS conduit pipe 1.6 mm thick , ISi marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. HSR -23.6.6 MS Pipe of 20 mm dia. HSR -23.6.6.1
30
-
-
... More
MS Pipe of 25 mm dia. HSR -23.6.6.2
30
-
-
... More
MS Pipe of 32 mm dia. HSR -23.6.6.3
130
-
-
... More
Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire
satisfaction of Engineer-in-Charge of work. 23.7.6 PVC pipe of 20 mm dia. HSR -23.7.6.1
30
-
-
... More
PVC pipe of 25 mm dia. HSR -23.7.6.2
30
-
-
... More
PVC pipe of 32 mm dia.HSR -23.7.6.3
30
-
-
... More
Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. HSR -23.23.6 MS perforated cable tray painted with powder coating 100 X 50X2mm HSR -23.23.6.1
150
-
-
... More
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect
up to the entire satisfaction of the Engineer-in-Charge of the work. HSR -23.22.4 TPN DB Horizontal type Double Door 12 way ( 8 incoming
3phase*12 outgoing) HSR -23.22.4.8
4
-
-
... More
Vertical TPN DB Double Door 12 way ( 8 incoming 3phase*12 outgoing) HSR -23.22.4.12
1
-
-
... More
Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- HSR -23.22.5 40 amp to 63 amp. MCB's FOUR POLE (Incomer for Three phase DB) HSR -23.22.5.8
5
-
-
... More
6 amp. to 32 amp Single Pole (Outgoings for all DBs) HSR -23.22.5.1
120
-
-
... More
40 amp to 63 amp. MCB's TRIPLE POLE (Outgoings for VTPN DBs) HSR -23.22.5.6
12
-
-
... More
Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work..HSR -23.22.6 DP RCCB 30ma sensitivity , 40 A HSR -23.22.6.2
3
-
-
... More
DP RCCB 30ma sensitivity , 63 A HSR -23.22.6.3
9
-
-
... More
Supply and erection of blanking sheet in existing distribution board. HSR -23.23.7
35
-
-
... More
Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the
entire satisfaction of the Engineer-in-charge of the work. HSR - 23.22.1 4 pole MCCB 200 to 250 amp, 25 KA (For VTPN DB Incomer) HSR -23.22.1.11
1
-
-
... More
Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or falseceiling including making connections etc as required HSR -23.20
6
-
-
... More
Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling includingcutting/making hole in ceiling including making connections etc as required HSR -23.21
231
-
-
... More
Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work. HSR -23.9
19
-
-
... More
Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50
meshes per inch at exhaust side complete as required HSR - 23.11
19
-
-
... More
Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan upto 450 mm sweep etc complete as required HSR -23.12
19
-
-
... More
Supply, erection and fixing of 12 mm thick ply wood board having a circular/rectangular hole etc as required including the cost of making hole, nuts and bolts, painting and other petty material with all labour etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. HSR -23.13
47.5
-
-
... More
Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR -24.1.1
4
-
-
... More
Extra for using salt and char coal/coke for pipe earth electrode as required. HSR -24.1.2
4
-
-
... More
Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick includingaccessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. HSR - 24.1.3
4
-
-
... More
Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode. HSR -24.1.5
4
-
-
... More
Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. HSR -24.1.7
48
-
-
... More
Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material HSR -24.1.8
105
-
-
... More
Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cm x 16cm x 3mm thick G.I. base plate and necessary nuts and bolts with washers. HSR -24.1.16
2
-
-
... More
Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size. HSR -24.1.14
450
-
-
... More
Providing and fixing testing joints made of 20mm x 3mm thick G.I. strips 125 mm long with 4 nos. G.I. bolts and nuts with washers complete HSR -24.1.17
2
-
-
... More
Laying of underground cable 0. 75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- HSR -24.2.2 50 Sq mm to 150 sqmm 2 to 4 Core HSR -24.2.2.3
75
-
-
... More
Laying and fixing of cable on surface/ cable tray etc as required:- HSR - 24.2.5 50 Sq mm to 150 sqmm 2 to 4 Core HSR -24.2.5.3
25
-
-
... More
2.5 Sq mm to 10 Sq mm 2 to 4 Core HSR -24.2.5.1
390
-
-
... More
Supply and erection of suitable compression type brass cable glands for underground Cable :- HSR -24.2.7 120 sqmm to 185 sqmm Cable 3 to 32 Core HSR -24.2.7.5
2
-
-
... More
Up to 6 Sq mm cable 2 to 4 Core HSR -24.2.7.1
48
-
-
... More
Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work . HSR -24.2.8 150sqmm HSR -24.2.8.11
2
-
-
... More
1.5 sqmm to 2.5 sqmm HSR -24.2.8.1
48
-
-
... More
Supply and erection of cable route marker made of 50 cm long 1 O mm dia M.S. Rod welded/riveted at the top with 1 O cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level. HSR -24.2.10
12
-
-
... More
Supplying of lighting LED luminaries complete with cold rolled sheet steel aluminium brass housing duly stove enamel painted, reflector, opal acrylic/ polystyrene louvers cover or metallic reflector / louvers, with Electronic ballast,/ driver /LED LAMP,holders, starters, MS clamps required in case of recess mounting fixtures) with LED tube/lamp and duly wired etc. as required.Note :- All fitting fixture model shall be as per approval of client / Arc / consultant.Below given are indicative. Decorative Table Lamp with 7 / 9 W LED lamp (Base Rate Rs 4000) NS
1
-
-
... More
12 / 15 W LED wall bracket lightr ( Base rate rs 1500 rs) NS
43
-
-
... More
18 W LED Downlighter (Base Rate Rs 1600) NS
145
-
-
... More
7 W LED Concelled Downlighter (Base Rate Rs 500) NS
32
-
-
... More
30 W LED Tube light (Base Rate Rs 600) NS
53
-
-
... More
70 W LED Industrial Highbay light (Base Rate Rs 9000) NS
25
-
-
... More
Flood Light LED Luminaire with 70w LED Lamp (Base Rate Rs 8000) NS
32
-
-
... More
Supplying, of oscillating aircirculator fan upto 500 mm. sweep on the wall / coloumn i/c making the hole to suit the size of the above fan making good the damage, connections, testing commissioning etc. as required NS
12
-
-
... More
Supplying of Axial Flow fan upto 450 mm. sweep in the existing opening i/c making the hole to suit the size of the above fan making good the damage, connections, testing commissioning etc. as required NS
6
-
-
... More
Supplying, of 1200mm sweep A.C. ceiling fans complete with fan motor, blades, down rod, canopy fan hook etc. as required .NS
46
-
-
... More
Supplying of under note sizes of heavy duty exhaust fans complete with fan motor, blades fixing frame, louver etc as required . 450 mm exhaust fan 900 RPM NS
13
-
-
... More
Supplying, erection, testing and commissioning of following tap off / splitter as per specification in 1.6mm thick CRCA sheet steel enclosure for CATV system. 4 Way splitter box NS
1
-
-
... More
Installation, testing and commissioning of oscillating aircirculator fan upto 500 mm. sweep on the wall / coloumn i/c making the hole to suit the size of the above fan making good the damage, connections, testing commissioning etc. as required NS
12
-
-
... More
Installation, testing and commissioning of Axial Flow fan upto 450 mm. sweep in the existing opening i/c making the hole to suit the size of the above fan making good the damage, connections, testing commissioning etc. as required NS
12
-
-
... More
Supply,testing and commissioning of 1100V grade XLPE AA Cable along walls/ on existing cable trays / underground etc. in an approved manner and as per follows; 3.5x150 sqmm NS
100
-
-
... More
3x2.5 sqmm NS
310
-
-
... More
4x2.5 sqmm NS
400
-
-
... More
Supplying and fixing of fan cover (hylam sheet).on the existing Fan Box as required.NS
46
-
-
... More
Supply, Installation, Testing & Commissioning of Analogue Addressable 2 loop fire alarm control panel . The panel can support 252 addressable detectors and 252 addressable devices. The panel should have 128X64 character graphical LCD display and having inbuilt mattery to load 2100 events. The panel should have inbuilt networking card that can network upto 16 panels. The panel shall have 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 60 minutes during emergency condition NS
1
-
-
... More
Supply, Installation, Testing & Commissioning of Addressable (loop powered) Reflective beam detector incorporates short circuit isolator in single unit housing having transmitter, reflector and the control electronics which is loop powered and distance range from 5-100 m using reflector units. It should have intergral laser for rapid initial alignment. Automatic drift compensation, Automatic reset following alarm or fault condition.
All the other specs should be as per the specification attached.
Approval : UL/EN, Approved NS
8
-
-
... More
Supply, Installation, Testing & Commissioning of Response Indicator which consists of steady glowing LED. This LED shall be mounted with in a round polycarbonate encloser and connected in parallel to the build in indicator of the detector as per specification. The RI Shall come "ON" as soon as the detector activates complete in all respects as per specifications. All the other specs should be as per the specification attached.
Approved NS
2
-
-
... More
Supply, Installation, Testing & Commissioning of Dust and Vermin proof (Resettable) addressable analogue Manual call boxes having front reset mechanism with 170° viewable LED and can be viewed from the distance of 7 M. also have inbuilt isolator having operating temperature from -40°C-70°C to initiate audio visual alarm in case of Human detection of fire.The manual call point must be indoor type with IP 44 rating.The call point must be ressatable type without breakglass.All the other specs should be as per the specification attached. Approval : UL/EN, Approved NS
6
-
-
... More
Supply, Installation, Testing & Commissioning addressable (Loop Powered) Open Area Sounder shall provide an output of 92/100dB at 1 meter and have a low current consumption at this level. It should have choice to setup 3 tones .
Group addressing must be supported.Must have inbuilt isolator.IP Rating : Minimum IP 65.
Volume setting must be 92/100 dB(A).Operating temperature : -20 to 60 degree C. All the other specs should be as per the specification attached.
Approval : UL/EN, Approved NS
6
-
-
... More
Supply, Installation, Testing & Commissioning of Loop addressable isolation Base All the other specs should be as per the specification attached.
Approval : UL/EN, Approved NS
2
-
-
... More
Supplying, installation, testing & commissioning of fault
isolator complete with base as required.NS
2
-
-
... More
Supply, Laying & testing of 2C x 1.5 sq.mm BRE Global certified Fire Survival Armoured (300/500V) CU cable (Red colour) with Class-2 annealed Copper conductor having Mineral ceramic glass fire barrier tape covered by an extruded layer of Cross-linkable LSZH insulation as per EI-5 OF BS EN 50363 along with ATC drain wire, aluminium tape screening and LSZH outer sheath as per BS:7629-1 & BS:5839-1 (latest edition). Outer sheath should be Anti Rodent/Anti Termite. Should retain circuit integrity as per BS 8434-2/PH-120 including connections to the detectors, manual call points, hooters, response indicators, accessories, fire alarm control panel etc. including termination with bottle type copper lugs, connectors etc as required to complete the system.NS
285
-
-
... More
Supplying, installation, testing & commissioning of 2 zone,
voice alarm controller with USB, MP3 player (including 2 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.NS
1
-
-
... More
Supply,talling, Testing and Commissioning of 6-10W/ suitable wattage lound speaker wall / perlin / column mounted for gactory area.Make Boch / Honiwell or equivalent. NS
4
-
-
... More
Supply, Installing, Testing and Commissioning of 40W RMS power amplifier Supply input AC 220 +/- 10% - 50/60Hz, Short Circuit, Power, Temperature, Overload Protection, Auto Cooling Fans. THD 0.1%, Frequency Response 20Hz - 20kHz, AC & DC Fuse, SNR 80dB.Make Boch / Honiwell or equivalent. NS
1
-
-
... More
Supplying, installation, testing & commissioning of Voice
command keypad 3 zone, with microphone assembly
complete as required.NS
1
-
-
... More
Supply, installation & Commissioning of single pair PVC insulated twisted copper conductor cable of 2x1.5 sq mm dia in conduits (for speakers). NS
150
-
-
... More
Supply, Installing, Testing and Commissioning of 19-inch Equipment Rack with standardized frame or enclosure for mounting multiple PA controllers, CD player, FM sources, Amplifiers etc modules NS
1
-
-
... More
Supply installation testing and commissioning of 2 Megapixel, IR DOME Body 1080P real time high resolution, 1/3" CMOS Sensor, True Day/Night Capability, Minimum illumination: 0 Lux (IR on), TDN (IR-Cut), AWB, AGC, 3.6mm lens, IR distance: Upto 20-30 meters, Power: 12VDC, IP65 weather-proof, Vandal resistant, AHD complete in all respect with all necessary accessories as required.NS
5
-
-
... More
Supply installation testing and commissioning of 2 Megapixel, IR Bullet Body 1080P real time high resolution, 1/3" CMOS Sensor, True Day/Night Capability, Minimum illumination: 0 Lux (IR on), TDN (IR-Cut), AWB, AGC, Defog, 3.6mm lens, IR distance: Upto 20 meters, Power: 12VDC, IP66 weather-proof, Vandal resistant complete in all respect with all necessary accessories as required.NS
2
-
-
... More
Supply installation testing and commissioning of 8 Channel DVR 1 SATA Support Real Time Recording at 720p@25fps, 1080p@12fps, HDMI Output 1080P high resolution recording, H.264 High profile compression, Playback 4 channels simultaneously, Multiple recording options: manual, schedule, motion detection, live view, record, play back, backup and remotely access, HDMI and VGA output simultaneously upto1080P resolution 1 SATA HDD interface: maximum 4TB storage capacity, DHCP, DDNS, IE browser and CMS supported, On-line user view: Mobile app for Android and iOS, Power: DC12V complete in all respect with all necessary accessories as required. NS
1
-
-
... More
Supply installation testing and commissioning of 6TB Surveillance Hard Disk for Recording - WD/Seagate complete in all respect with all necessary accessories as required.NS
1
-
-
... More
Supply installation testing and commissioning of SMPS Power Supply Unit complete in all respect with all necessary accessories as required. NS
2
-
-
... More
Supply installation testing and commissioning of LED Monitor - 24 Inch complete in all respect with all necessary accessories as required. NS
1
-
-
... More
Supply, Installation, Testing & Commissioning of data rack equiped with 24 port switch three Nos. , 24 poft pactch panel three Nos., Patch card, Patch Cable 1 meter for each port, cable manaer two Nos. Including cost of all labour and materials to conplete the job Make - D Link (a) 6 U Data Rack N.S.
1
-
-
... More
Supply, Installation, Testing & Commissioning of weather proof MCB Box 4 way PVC enclosure with cover against splash complete the job in all respect up to the entre satifaction of Engineer in charge of the work N.S.
32
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. N.S. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
15
-
-
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire N.S.
15
-
-
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire N.S.
15
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire N.S.
40
-
-
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire N.S.
150
-
-
... More
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. DSR-23.8.11 5amp 1 way switch (For TV) N.S.
9
-
-
... More
Installation ,Testing, Commissioning of wall bracket fittings of all sizes and shapes including LED lamps per fitting, complete with all accessories including connections etc. as required. N.S.
43
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. N.S.
46
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements