Maharaja Agrasen Medical College Tender
... More
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 2,92,000Document Cost
₹ 15,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_HRY_262097_1Bid Award Id
ViewTender No
MAMC/Engg./741 Dated 02-03-2023Tender Authority
Maharaja Agrasen Medical College ViewPurchaser Address
-Website
http://https://www.mamc.edu.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling old plaster or skirting raking out joints and cleaning sqm the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Toilet walls (HSR 5.45)
145.69
-
-
... More
Dismantling steel work in built up sections in angles, tees, flats and channels Including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within
50 metres lead. (HSR 5.33)
50
-
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (HSR 5.23)Nominal concrete 1: 1.5:3 or richer mix (i/c equivalent cum design mix) (HSR 5.23.1)
2
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (HSR 5.70)
140.85
-
-
... More
Dismantling of flushing cistern of all types (C.I.IPVCNitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (HSR 5.63)
15
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: Note :- this item is also include the Cement Concrete filling in all around of MS pressed steel frame or wherever required as per direction by Architect / Client (HSR 6.1) 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size) (HSR 6.1.2)
2
-
-
... More
1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) (HSR 6.1.6)
2
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for (HSR 6.30)
Suspended floors, roofs, landings, balconies and access platform (HSR 6.30.3)
10
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). (HSR 6.25) All works above plinth level up to floor IV level (HSR 6.25.2)
5
-
-
... More
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints,
spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings,welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 6.33)
Thermo-Mechanically Treated bars of grade Fe-500D or more (HSR 6.33.6)
500
-
-
... More
Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: (HSR 7.21)
Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.21.2)
2.3
-
-
... More
Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : (HSR 7.22) Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.22.2)
21.71
-
-
... More
Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. (HSR 7.28)
ement mortar 1:3 (1 cement :3 coarse sand) (HSR 7.28.1)
11.2
-
-
... More
Cement mortar 1 :4 ( 1 cement :4 coarse sand) (HSR 7.28.2)
5
-
-
... More
Extra for providing and placing in position 2 Nos. 6 mm dia. M.S. bars at every third course of half brick masonry (HSR 7.30)
16.2
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished / Lappato finished / Flamed , machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (HSR 8.26)
Granite of any colour and shade (HSR 8.26.2)
Area of slab up to 0.50 sqm (HSR 8.26.2.1)
1.22
-
-
... More
Area of slab over 0.50 sqm (HSR 8.26.2.2)
51.02
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (HSR 8.27)
Granite work (HSR 8.27.2)
177.1
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (HSR 8.28)
10
-
-
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (HSR 8.5)
177.1
-
-
... More
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of MS base plate 200 x 200 x 10 mm or as per Specified by architect / Client or M.S. brackets/ lugs of angle iron/ flats/ with the help of M10 bolt ( Min 4no's bolt per plate) etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1 :2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners / Mechanical bolt on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). (HSR 8.2)
48
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (HSR 12.37)
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (HSR 12.37.1)
18.95
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). (HSR 12.39)
18.95
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (HSR 12.12)
1.0 mm thick (HSR 12.12.2)
37.91
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (HSR 12.98)
250X16 mm (HSR 12.98.2)
10
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (HSR 12.99)
200X10 mm (HSR 12.99.3)
10
-
-
... More
150x10mm (HSR 12.99.4)
10
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (HSR 12.102)
125mm (HSR 12.102.1)
10
-
-
... More
100 mm (HSR 12.102.2)
10
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (HSR 12.103)
Twin rubber stropper (HSR 12.103.2)
10
-
-
... More
Providing and fixing aluminium casement stays, ISI marked, anodised transparent or dyed to required colour and shade or powder coated or polyester powder coated, with necessary screws etc. complete. (HSR 12.104)
Anodized (AC-10) Aluminium (HSR 12.104.1)
72
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. (HSR 12.105)
10
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (HSR 22.210)
Rectangular shape 1500x450 mm (HSR 22.210.4)
4
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : (HSR 12.157)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) (HSR 12.157.2)
Powder coated aluminium (minimum thickness of powder coating 50 micron) (HSR 12.157.2.2)
903.26
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (HSR 13.28)
320
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (HSR 13.3)
Profile C (HSR 13.3.2)
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (HSR 13.3.2.1)
37.33
-
-
... More
Profile E (HSR 13.3.3)
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (HSR 13.3.3.2)
5.5
-
-
... More
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. (HSR 13.5)
10 X 120 mm (HSR 13.5.3)
80
-
-
... More
10 x 160 mm (HSR 13.5.5)
80
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (HSR 13.41)
68
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. This Item is Also Include the Skirting ( 100 mm height). Epoxy grout will be paid extra Floor & Wall Tiles (HSR 10.63)
Size of Tile 600x600 mm (HSR 10.63.2)
20
-
-
... More
Size of Tile 1000x1000 mm (HSR 10.63.4)
1035.41
-
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.58)
115.69
-
-
... More
Deduct for not using 20 mm thick cement mortar 1 :4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm (HSR 10.64)
115.69
-
-
... More
Providing and fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Adhesive make Kerakoll biotile / Bioflex or eqv. (HSR 10.65)
42.88
-
-
... More
Grouting the joints of flooring tiles having joints of 3 mm width & 10 mm deep or upto tile / Granite thickness, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge (HSR 10.70) Size of Tile 600x600 mm ( Make Kerakoll or Equivalent or as per selection by Architect / Client) (HSR 10.70.2)
20
-
-
... More
Size of Tile 1000x1000 mm ( Make Kerakoll or Equivalent or as per selection by Architect / Client) (HSR 10.70.4)
42.88
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab laid on 5 to 7 mm thick Tile adhesive and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (HSR 10.50)
Polished / Lappato finished / Flamed Granite stone slab. (HSR 10.50.1)
116.28
-
-
... More
Providing and laying of 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1 :2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening ( Sika make or Eqv.) compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. (HSR 10.11)
48.62
-
-
... More
Providing and fixing glass strips in joints of terrazzo/ cement concrete floors (HSR 10.22)
40 mm wide and 4 mm thick (HSR 10.22.01)
170.18
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm hick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (HSR 9.47)
GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fibre acoustical fleece. Make Design Deo, Goraya Buildtech or eqv. (HSR 9.47.2)
50.55
-
-
... More
10 mm thick cement plaster (HSR 11.4)
1 :3 (1 cement: 3 fine sand) (HSR 11.4.2)
10
-
-
... More
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per litre respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. (HSR 11.46)
104.41
-
-
... More
12 mm cement plaster of mix : (HSR 11.50
1 :4 (1 cement: 4 fine sand) (HSR 11.5.3)
104.41
-
-
... More
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. . ( this item Will also include water Proof Chemical ( Sika & Dr. Fixit or equivalent) in outer plaster layer) (HSR 11.14)
104.41
-
-
... More
Providing and applying two coats white cement based putty of approved brand and manufacturer e.g. J.k., Asian, Birla putty etc. or any equivalent, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (HSR 11.58)
104.41
-
-
... More
Finishing with Deluxe Multi surface Emulsion paint system for interiors and exteriors using Primer as per manufacturers specifications: (HSR 11.97)
Two or more coats applied on walls @ 1.25 litre/10 sqm over and including one coat of Special primer applied @ 0. 75 litre /10 sqm (HSR 11.91.1)
1683.95
-
-
... More
Painting the wooden or metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade (HSR 11.82)
Two or more coats on new work (HSR 11.82.1)
25
-
-
... More
Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge. (HSR 11.17)
208.83
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. (HSR 11.73) On concrete work (HSR 11.73.2)
32.82
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement sluny mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/ sqm This layer will be allowed to air cure for 4 hours.
(b) Second layer of sluny of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints corners, junctions of pipes and masonry with polymer mixed slurry. (HSR 28.15)
100.87
-
-
... More
Outer jali Providing & Fixing Stone jali 25 - 30 mm thick Gwaliorment stone with sand blasted finish CNC cut ( average 60 to 70 % perforation) on MS base frame base frame finish with epoxy paint as detail by arch. / client (Structural steel frame shall be paid in Structure Steel item (Under Chapter Steel & Iron work HSR Code 13.28 ) (NS) White Sand Stone (NS) (base rate 425 rs per sft)
9.6
-
-
... More
Providing & Applying Silicon Coating upto all height & levels as per Following Procedure Cleaning of exterior exposed Sand Stone Work surface by water jet for removal of Any existing fungus / Stain / Buffing or efflorescence has to be removed by wire brushing if any presence. After complete inspection on clean dry surface application of KERAKOVER METEOR S will be applied by spraying till saturation or min 2-3 coats . (NS) Make - Kerakoll ( KERAKOVER METEOR S IS A PENETRATING SEALERS ) or equivalent. (NS) Any Color sand stone (NS)
9.6
-
-
... More
Providing & Fixing of Modular Aluminium single glazed partitioning frame on four sides of 45mm System, el. Dimension – 45mm x 25mm. WITH I SECTIONS IN BETWEEN with 10mm thick toughned glass and gaskettes. Make: UNIDOR (NS)
198.7
-
-
... More
Providing & fixingSINGLE LEAF: Glass Door Single Leaf having door frame of 45x25 on three corners with 12mm thick toughened glass and hardware including studio lock, open door closure with saddle and acrylic plate,Horizontal hinges. Color of hardware will be natural silver/black anodized. Make: UNIDOR ( basic rate of hardware is 26000 rs) (NS)
26
-
-
... More
Providing & Fixing HENGO DOUBLE LEAF: Glass Door Double Leaf having door frame of 45x25 on three corners with 12mm thick toughened glass an hardware including studio lock, open door closure with saddle and acrylic plate,horizontal hinges. Color of hardware will be natural silver finish/black anodized. Make: UNIDOR, ( basic rate of hardware is 40000 rs) (NS)
2
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading also included in this item ) :
With Toughened glass panes of 6.0 mm thickness (weight not less than 12.50 kg/sqm ) (NS)
97.13
-
-
... More
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. (This Item Will Also Include the Wooden Frame For Hanging the high wall AC Made With 40 x 40 mm Wooden frame ( Marandi Wood). This Item Will also Include the NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. 75 mm overall thickness partition with 13 mm thick double skin fire rated board (multistop 3) or eqv. conforming to IS: 2095: part I ( Make USG Boral or Equivalent ) (NS)
153.13
-
-
... More
Providing and fixing 12 mm thick interior grade waterproof ply in wall panelling work fixed on to 40X40mm Hard wood framework placed at 600 mm C/C (both ways) fixed to respective RCC/ brick surfaces with required fasteners, screws, sleeves, shims etc., finished with as per approved sample Finish with 3 mm thick Veneer ( veneer finish with melamine / PU polish) on exposed surfaces and two coats of synthetic satin enamel paint on un exposed wooden framework surface complete to the entire satisfaction of Engineer in charge/Project manager. ( This item Will also Include the Necessary Trap door whichever require as per detail & Design given in Drawings nothing to be paid extra ) Surface area to be measured. Base rate of Veneer is 100 rs per sft. NS
39.98
-
-
... More
Providing & fixing in position Wooden False Ceiling consisting of kailwood / marandi wood battens 2"x2"section in framings grids as per drawings (framework to have coating of fire retardant and anti-termite paint) with 12mm thick ply and 3.0mm thick Veneer With PU polish topping fixed to the framework in desired shape/form or wooden rafters as per drawings, i/c necessary M.S. hangers, screws, clips and polyeurethene coating etc. complete to the satisfaction of Architect/ Client Engineer. (Base price of Veneer to be used to be Rs. 100 / sq.ft ( without polish) .). ( this item Will also Include the Necessary Trap door whichever require as per detail & Design given in Drawings nothing to be paid extra ) (NS)
15.01
-
-
... More
Providing and fixing Toilet Cubical Make- Wallpro Or Equivalent MODLE TYPE - SS SERIES Thickness of Compact Laminate : 12 mm
Color of HPL Boards: Single Colour
Size of Cubicle : Party Fixed & partly openable
Door Size : 750mm (H) x 610mm (W)
Divider Size: 1775mm (H)
Overall Height Of Cubicle : 2003 mm (Including bottom Gap of 150mm)
Accessories: Standard – Merino Make or Equivalent Aluminium, ss Polyamide 6 accessories Using
a) SS “U” Channel
b) SS “F” channel
c) SS Door Stopper Channel
d) SS Top Rail
e) ss Coat Hook
f) ss Privacy Thumb turn c/w Occupancy Indicator
g) ss Door Knob
h) ss Hinges – Gravity to close
i) ss Adjustable Foot
j) Rubber Door Stopper Lining
k) S.S.Screws 304 G & P.V.C Wall Plugs Complete as per pattren of Existing building name Para Medical Toilet Block Measurement Shall be Floor to top height . (NS)
26.99
-
-
... More
Providing and fixing 8mm and above thick laminated wooden flooring of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, ecofriendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. (NS)
51.42
-
-
... More
Providing & Fixing Rockfon® Stonewool Acoustic Ceiling PACIFIC High NRC (0.80) - Fire Rating A1 (EN 13501-1) - RH 100% (No visible deflection/sagging in high humidity conditions) - Superior Class Light Reflection 86% - Sag Resistant, Anti-Sag Warranty. - Pacific E (Microlook) Edge Ceiling Tiles of size 600x600mm, 12mm thick. - Anti-Bacterial Properties & M1 Class Emission Certification made up rsv with Natural Stone (Basalt Rock) - A complete Green Product & perfectly suitable for any kind of False Ceiling application in building & construction. - The Visible side is a smooth white painted fleece, the Rear side: back fleece with complete factory finish and Painted edges. The system consists of Rockfon Stonewool Pacific 12mm Tiles 600x600mm, A (Square) Edge laid in to Silhouette Grid Suspension System 15mm X 32 X 0.30mm system manufactured as per specs of Rockfon, with limited manufacturer's warranty of 15 Years.
Installation:
Suspension System shall be Silhouette Black / White Reveal System consisting of Main Runner 3000mm, Cross Tee 1200mm, Cross Tee 600mm & Wall Angle 3000mm. Finished and body of grid shall have white colour and the Reveal or the Groove shall have black colour. All level and alignment of the Grid shall be accurate. Material shall be installed in strict compliance with local codes and manufacturers recommendations and as directed by site in charge. Fire resistance as per BS 476. Tiles are not affected by humidity ( Base rate - Rs.1550/- per sqm )(NS)
341.63
-
-
... More
Providing & Installation Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) U Shape panels. Panels shall be made of 0.5 mm thick galvanized steel Powder-coated and length up to 3600 mm. Panel shall be high corrosion resistance and good Color stability. Centre to Centre panel gap will be 150 mm.Panels are fixed on to roll formed carriers 32 mm wide x 42 mm deep out of 0.80 mm G.I sheet Powder-coated Color with cut-outs to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 3.6 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels. Make ( Make Design deo ,Wall pro ,hunter Douglas , dunlom , armstrong or equivalent) ( Base rate 425 rs per sft ) (NS)
238.79
-
-
... More
Eccoboard Polyester fiber Acoustical Wall Panels Providing And Fixing Of Acoustical Wall Panels With Acoustical Properties Made Of 100 % Polyester Fiber With A Thickness Of 9 mm with NRC of 0.56 on direct pasting on wall and density of 193 Kg per cubic meter , Should Be A Homogeneous Material With So Many Colour Options (Free Colour / Solid Colour) As Per The Choice Of The Architect/ Person In Charge Of Size 2440 Mm X 1220 mm Can Be Cut In To Any Sizes For E.G. Like 600mm * 600mm / 600mm * 1200 Mm / 1200 Mm * 1200mm As Per Client Requirement., Product Shall Not Burn Of Its Own In Order To Achieves The Highest Stringent Fire Ratings 25 ( A Grade ) ASTM – E84., Should Be Weather Resistance With Anti Fungal Properties, Thermal Insulation. Should Be Easy To Install With The Help Of self melting fiber bonding Adhesive. Base rate 140 rs per sft ) Make: Eccoboard or Eqv. (NS)
130
-
-
... More
Providing and fixing in position 6mm thick LAQUERED GLASS, Saint gobain/ ASHAI over 12mm thick comm. plywood board backing with silicon sealants as per manufacturer specification. To be offsetted from the wall with edge beading in SS all complete or as instructed by the Engineer-in-Charge/ Project manager (NS)
50
-
-
... More
Providing & Fixing 450mm deep Kitchen & Pantry Over Head Counter Cabinetry, boxing, inside partition, shutters & drawers to be made out of 19mm WPP (solid core) of approved make and backing with 12mm thick plywood (BWP) of approved make. Front face of shutter will be finished with Suede / Matt Laminate ( 1 mm thk) as/approved sample. Size L - as per design , B- 450 mm , H - 600 mm Inside surfaces will finish with 1.0 mm thk laminate of approved shade and make. (NS)
18.74
-
-
... More
Providing & Fixing Toilet Counter / Vanity - Size 1150x600x400 Wall Fixed storage cabinetry, boxing, inside partition, shutters & drawers to be made out of 19mm WPP (solid core) of approved make and backing with 12mm thick plywood (BWP) of approved make. Front face of shutter will be finished with Suede / mat 1 mm thk Laminate as/approved sample. Inside surfaces will finish with 1.0 mm thk laminate of approved shade and make. Counter Top in White 18 mm thk Corian Finish or as per Detail & Design given by Client / Architect ( This Item Will Also include hardware as per Required( SS Finish) ) (NS)
2.7
-
-
... More
Making and fixing in position (as per approved sample) 450mm deep wall hung/floor standing storage cabinetry, boxing, inside partition, shutters & drawers to be made out of 19mm blockboard (solid core)of approved make and backing with 12mm thick plywood (BWP) of approved make. Front face of shutter will be finished with 1 mm thick Laminate as/approved sample. Inside area & surfaces will finish with 1.0 mm thk laminate of approved shade and make. All exposed edges to have teak/seasoned matching wood lipping polished as/ approval. Back surface to be finished with 2 coats of synthetic enamel paint of approved shade and colour. 1.0mm Thick Laminate face shutters to be finished with as/ approval. The item includes All Hardware, all complete as/ design to the entire satisfaction of Engineer In charge/Project manager. (Elevation area to be measured). All hardware to be of Ozone/Hafle make, all hinges flushed with locks where ever required and push open. (Base rate of Laminate to be taken as Rs. 40/- sft.) (NS)
9
-
-
... More
Providing and fixing in position (as per approved sample) wall hung / floor standing Mobile Compactor Single Face Fixed which Having 05 loading levels. (UDL- 50 Kg) & depth is 800-1000 mm include guard rail & all other necessary aceessories for Fixing the compactor complete in all respect with satisfaction of architect / Client. Make ( Walter ( Ganpati furniture or eqv.) or Eqv. ) (NS)
14.64
-
-
... More
Providing and fixing Roller Blinds (Vista Level or/ MAC/ DACK) of approved shade, texture and fabric including all associated accessories etc. complete to the satisfaction of Architect/ Engineer. (Base price of the fabric be used Rs. 150/ sq.ft.). (NS)
108.16
-
-
... More
Providing and fixing of Photo Frames/ Customized Paintings of average size of 3'0"x7'0", with synthetic framing wood frames, side edges with 3 mm thick mount board (of desired colour shade), with front cover of 3 mm thick of float glass; and backing of 5/6 thk MDF board and with necessary taping and fixing with screws / aluminium hooks; all complete in all respect. The images/ photographs /paintings have to be approved by Engineer-in-Charge / Architect before installation at site. (Base Price of painting to be Rs. 2500/ painting) (NS)
5
-
-
... More
Providing & fixing Logo & Letters "Conference Room & Reception or other areas " with acrylic sheet and S.S. 304 grade 16 gauge base. Logo to be provided with LED lights (Phillips/ Havells/ Wipro) as per Architect/Client instructions. The logo to be fixed on wall cladding/ panelling partition as per details and instructions etc. complete to the satisfaction of Architect. . (base rate 1500 rs) (NS)
20
-
-
... More
Providing & fixing Toilet & other Area Stainless Steel 2-3 mm thk Plate Signage as per selection by architect / Client. (base rate 500 rs) (NS)
6
-
-
... More
Providing and fixing Digital Glass Clear Film Print as per design in all shapes including curve shapes etc. complete to the satisfaction of Architect/ Client Engineer. Make 3m Or Equivalent. ( Base rate of film is 110 rs per sft) (NS)
45.94
-
-
... More
Public Health Work items:
Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (HSR-22.33) ( Base rate of Wc including cistern is 10000 rs)
10
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality &make and as per the direction of Engineer-in-charge. (HSR-22.15) ( Base rate of bottle trap is 650 rs)
16
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (HSR 22.22)
White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (HSR 22.22.1)
6
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(HSR-22.14) Semi rigid pipe (HSR-22.14.1) 40 mm dia (HSR-22.14.1.2)
16
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :(HSR-22.10) Kitchen sink with drain board(HSR-22.10.1)
510x1040 mm bowl depth 250mm (HSR-22.10.1.1)
2
-
-
... More
Providing and fixing 40mm i/d chromium plated trap with chromium plated pipe to wall with walflange completed for use with sinks (HSR-22.17) With Bottle Trap (Indian make) (HSR-22.17.1)
2
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (HSR-22.209)
16
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (HSR-22.210)
Rectangular shape 1500x450 mm (HSR-22.210.04)
6
-
-
... More
Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P. brass screws and rawl plugs etc. complete including cutting and making good the walls etc.(HSR-22.212) Tree way (HSR-22.212.1.3)
10
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms. (HSR-22.106) 15 mm nominal bore (HSR-22.106.1)
12
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. (HSR-22.108) 15 mm nominal bore (HSR-22.108.1) ( Base rate 400 rs)
26
-
-
... More
Providing and fixing toilet paper holder: (HSR-22.42) C.P. brass (HSR-22.42.1)
10
-
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (HSR-22.127)
16
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (HSR-22.117)
16
-
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. (HSR-22.118)
16
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (HSR-22.119) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (HSR-22.119.2)
1
-
-
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C.pan. (HSR-22.35)
10
-
-
... More
Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-incharge. (HSR-22.216) 25 litres capacity. (HSR-22.216.1)
5
-
-
... More
SECTION B -WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(HSR-22.86) Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes (HSR-22.86.1)
20
-
-
... More
20mm dia. nominal outer dia pipe (HSR-22.86.2)
40
-
-
... More
25mm dia. nominal outer dia pipe (HSR-22.86.3)
80
-
-
... More
32mm dia. nominal outer dia pipe (HSR-22.86.4)
20
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end )(HSR-22.98) 20 mm nominal bore (HSR-22.98.2)
6
-
-
... More
32 mm nominal bore (HSR-22.98.3)
2
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : (HSR-22.101) 45 cm length (HSR-22.101.02) 15 mm nominal bore (HSR-22.101.02.01)
26
-
-
... More
SECTION C. SOIL, WASTE & VENT PIPES Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. (HSR-22.222) Single Socket Type B (HSR-22.222.2)
110mm old SWR uPVC pipe lines laid complete (HSR-22.222.2.2)
90
-
-
... More
Providing and fixing G.I. waste pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls/floor etc. (HSR-22.88)
40 mm dia nominal bore (HSR-22.88.5)
30
-
-
... More
50 mm dia nominal bore (HSR-22.88.6)
15
-
-
... More
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x50 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4Nos., 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1 .6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.(HSR-22.54) Total bracket length 580 mm of approved shape and design ( for single 100 mm dia pipe) (HSR-22.54.1)
30
-
-
... More
SECTION E- SEWERAGE SYSTEM Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand) including testing of joints etc. complete: (HSR-22.163) 100 mm dia (HSR-22.163.1)
10
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design (HSR-22.164) 100 mm diameter S.W. pipe (HSR-22.164.1)
10
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (HSR-22.166) 150 x 100 mm size P type (HSR-22.166.2) With common burnt clay non-modular bricks of class designation 7 .5 (HSR-22.166.2.1)
9
-
-
... More
Plumbing NS Items Providing & fixing 15mm C.P. brass Sink Mixer with Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges - Make: Jaquar; Model : CON-309KNM NS (Basic Rate- 3850 Rs)
2
-
-
... More
Providing and fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (Base rate 1000 rs) NSR
10
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (Base rate of wash basin is 5500 rs & Basin mixer is 3300 rs) NSR . Make Asian Paint or Jaquar
16
-
-
... More
Providing and fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. Make Asian Paint or Jaquar ( Base rate of urinal with sensor is 12000 rs ) NSR
5
-
-
... More
Providing and fixing SS grating of approved quality and colour. Circular type 100mm nominal dia NS
19
-
-
... More
125 mm nominal dia with 25 mm waste hole NS
2
-
-
... More
Providing and fixing SWR uPVC Plain bend of required degree (6KG/Cm2) complete in all respect. NS 110mm dia (Basic Rate- 155 Rs)
25
-
-
... More
Providing and fixing SWR uPVC single equal plain junction of reqd. degree. NS 110x110x110mm (Basic Rate- 273 Rs)
15
-
-
... More
Provinding and fixing SWR uPVC terminal guard. NS 110mm (Basic Rate- 46.50 Rs)
2
-
-
... More
Providing and fixing SWR uPVC collar. NS 110mm (Basic Rate- 108 Rs)
15
-
-
... More
Providing and fixing floor clean out plug. NS 110mm (Basic Rate- 129 Rs)
4
-
-
... More
Providing & fixing uPVC trap of self cleansing design with screwed down of hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: NS 110 mm inlet and 110 mm outlet.
13
-
-
... More
Fire Fighting Work items:
Providing and fixing water based CO2 type extinguishers consisting of welded M.S.cylinderical body, squeeze lever discharge vave 30 cms long high pressure discharge hose, discharge nozzle,suspension braket, ISI marked as per IS:940 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Brand LIFEGUARD Capacity 9 litres. NS (Basic Rate- 2875 Rs)
6
-
-
... More
Providing and fixing CO2 type Fire Extinguisher ISI marked conforming to IS: 15683. Capacity 4.5 Kg. Complete with delivery hose horn, wheel type release valve, locking arrangement, operation manual and bracket. Operating Temperature:- 30ºC to +55ºC. Brand LIFEGUARD Capacity 9 Kg. NS (Basic Rate- 9750 Rs)
6
-
-
... More
Electrical Work items:
Note: The rates worked out for items 23.1 to 23.7 and their sub-items are by considering recessed conduit wiring. These rates may be reduced by 15% wherever surface conduiting wiring is required to be done as per directions of Engineer-in-Charge. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.. Group A HSR -23.4.1.1
135
-
-
... More
Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch-Group A (secondary light point -(Group point wiring) HSR -23.4.3.1
101
-
-
... More
Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.. Group A HSR -23.4.2.1
2
-
-
... More
Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group A HSR -23.4.4.1
25
-
-
... More
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A HSR -23.4.5.1
22
-
-
... More
Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. HSR -23.3.6 1 run of Size 1.50 Sqmm(1/1.40mm) HSR -23.3.6.1
5
-
-
... More
1 run of Size 2.50 Sqmm(1.1.80mm) (for Circuits) HSR -23.3.6.2
300
-
-
... More
1 run of Size 4 Sqmm(1/2.24mm) (For Geyser and AC) HSR - 23.3.6.3
800
-
-
... More
1 run of Size 6 Sqmm(1/2.80mm) (Swimming pool) HSR -23.3.6.4
5
-
-
... More
1 run of Size 10 Sqmm(1/3.50 mm) (Swimming pool) HSR -23.3.6.5
5
-
-
... More
2 run of Size 1.50 Sqmm(1/1.40mm) HSR -23.3.6.6
5
-
-
... More
2 run of Size 2.50 Sqmm(1.1.80mm) (for Circuits) HSR -23.3.6.7
750
-
-
... More
2 run of Size 4 Sqmm(1/2.24mm) (For Geyser and AC) HSR -23.3.6.8
1000
-
-
... More
3 run of Size 1.50 Sqmm(1/1.40mm) HSR -23.3.6.9
5
-
-
... More
3 run of Size 2.50 Sqmm(1.1.80mm) (for Circuits) HSR -23.3.6.10
250
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. DSR 2018 -1.14 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
5
-
-
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire DSR -1.14.4
5
-
-
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire DSR -1.14.5
5
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire DSR -1.14.10
8
-
-
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire DSR -1.14.11
16
-
-
... More
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. DSR-23.8.11 5amp 1 way switch (For UPS Point) DSR -23.8.11.1
40
-
-
... More
5 amp Socket (For UPS Point) HSR -23.8.11.4
80
-
-
... More
15 amp 1 way switch (For Geyser and AC) HSR -23.8.11.3
16
-
-
... More
15 amp 6 pin Socket (For Geyser) HSR -23.8.11.5
16
-
-
... More
step type Fan Regulator 2 modules 300 watt HSR -23.8.11.7
62
-
-
... More
Blanking plate HSR -23.8.11.10
25
-
-
... More
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. DSR - 23.8.10 1 & 2 Modules including combined plate for Telephone and data HSR -23.8.10.1
80
-
-
... More
3 Modules HSR -23.8.10.2
5
-
-
... More
4 Modules HSR -23.8.10.3
5
-
-
... More
6 Modules HSR -23.8.10.4
40
-
-
... More
8 Modules HSR -23.8.10.5
4
-
-
... More
12 Modules HSR -23.8.10.6
6
-
-
... More
Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm.long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. HSR -23.8.4
62
-
-
... More
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. HSR -23.8.11 Bell Push HSR -23.8.11.6
2
-
-
... More
Telephone Socket outlet modular type HSR -23.8.11.8
40
-
-
... More
TV Socket outlet modular type HSR -23.8.11.9
1
-
-
... More
RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type HSR -23.8.11.11
40
-
-
... More
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. HSR -23.8.101 & 2 Modules including combined plate for Telephone and data HSR -23.8.10.1
40
-
-
... More
Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. HSR -23.23.8 2 pair telephone wire HSR -23.23.8.1
800
-
-
... More
Supply, laying, testing and commissioning of the following co-axial PVC insulated conductor cable in existing surface / recessed conduit etc. and including making terminal joints, complete as required. HSR -23.23.8 RG-6 HSR -1.19
60
-
-
... More
Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required HSR -23.23.9
900
-
-
... More
Supply and erection of MS conduit pipe 1.6 mm thick , ISi marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. HSR -23.6.6 MS Pipe of 20 mm dia. HSR -23.6.6.1
10
-
-
... More
MS Pipe of 25 mm dia. HSR -23.6.6.2
10
-
-
... More
MS Pipe of 32 mm dia. HSR -23.6.6.3
15
-
-
... More
Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. (HSR 23.7.6 ) PVC pipe of 20 mm dia. HSR -23.7.6.1
400
-
-
... More
PVC pipe of 25 mm dia. HSR -23.7.6.2
900
-
-
... More
PVC pipe of 32 mm dia.HSR -23.7.6.3
60
-
-
... More
Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. HSR -23.23.6 MS perforated cable tray painted with powder coating 100 X 50X2mm HSR -23.23.6.1
10
-
-
... More
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. HSR -23.22.4 TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing) HSR -23.22.4.8
3
-
-
... More
Vertical TPN DB Double Door 6 way ( 8 incoming 3phase*6 outgoing) HSR -23.22.4.10
1
-
-
... More
Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- HSR -23.22.5 40 amp to 63 amp. MCB's FOUR POLE (Incomer for Three phase DB) HSR -23.22.5.8
3
-
-
... More
6 amp. to 32 amp Single Pole (Outgoings for all DBs) HSR -23.22.5.1
84
-
-
... More
40 amp to 63 amp. MCB's TRIPLE POLE (Outgoings for VTPN DBs) HSR -23.22.5.6
3
-
-
... More
Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work..HSR -23.22.6 DP RCCB 30ma sensitivity , 40 A HSR -23.22.6.2
3
-
-
... More
DP RCCB 30ma sensitivity , 63 A HSR -23.22.6.3
6
-
-
... More
Supply and erection of blanking sheet in existing distribution board. HSR -23.23.7
15
-
-
... More
Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. HSR - 23.22.1 4 pole MCCB 125 to 160 amp, 25 KA (For VTPN DB Incomer) HSR -23.22.1.10
1
-
-
... More
Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or falseceiling including making connections etc as required HSR -23.20
19
-
-
... More
Installation ,Testing, Commissioning of wall bracket fittings of all sizes and shapes including LED lamps per fitting, complete with all accessories including connections etc. as required. DSR - 1.33
10
-
-
... More
Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling includingcutting/making hole in ceiling including making connections etc as required HSR -23.21
138
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. DSR - 1.45
62
-
-
... More
Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work. HSR -23.9
7
-
-
... More
Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50
meshes per inch at exhaust side complete as required HSR - 23.11
7
-
-
... More
Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan upto 450 mm sweep etc complete as required HSR -23.12
7
-
-
... More
Supply, erection and fixing of 12 mm thick ply wood board having a circular/rectangular hole etc as required including the cost of making hole, nuts and bolts, painting and other petty material with all labour etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. HSR -23.13
17.5
-
-
... More
Laying of underground cable 0. 75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- HSR -24.2.2 50 Sq mm to 150 sqmm 2 to 4 Core HSR -24.2.2.3
30
-
-
... More
Laying and fixing of cable on surface/ cable tray etc as required:- HSR - 24.2.5 50 Sq mm to 150 sqmm 2 to 4 Core HSR -24.2.5.3
10
-
-
... More
Supply and erection of suitable compression type brass cable glands for underground Cable :- HSR -24.2.7 70 sqmm to 95 sqmm Cable 3 to 3 1/2 Core HSR -24.2.7.4
2
-
-
... More
Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work . HSR -24.2.8 70sqmm HSR -24.2.8.8
2
-
-
... More
Supply and erection of cable route marker made of 50 cm long 1 O mm dia M.S. Rod welded/riveted at the top with 1 O cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level. HSR -24.2.10
5
-
-
... More
Supplying, Installation, testing and commissioning of following sizes of 0.5 mm dia annealed tinned copper conductor PVC insulated and PVC sheathed unarmoured telephone cable on surface/ existing cable tray complete as required. 20 Pair NS
40
-
-
... More
50 Pair NS
25
-
-
... More
Supplying, Installation, testing and commissioning of following sizes of telephone distribution board in M.S. hinged type box duly painted complete with Krone type tag block etc. including terminations of cable as required. 20 Pair NS
2
-
-
... More
50 Pair NS
1
-
-
... More
Supply,testing and commissioning of 1100V grade XLPE AA Cable along walls/ on existing cable trays / underground etc. in an approved manner and as per follows; 3.5x70 sqmm NS
40
-
-
... More
Supplying of lighting LED luminaries complete with cold rolled sheet steel aluminium brass housing duly stove enamel painted, reflector, opal acrylic/ polystyrene louvers cover or metallic reflector / louvers, with Electronic ballast,/ driver /LED LAMP,holders, starters, MS clamps required in case of recess mounting fixtures) with LED tube/lamp and duly wired etc. as required.Note :- All fitting fixture model shall be as per approval of client / Arc / consultant.Below given are indicative. 20W LED Tube Light lamp of Havells Cat Nos LUMILINE+XS36WLED865SPCWH or equivalent NS
22
-
-
... More
12 W LED Down Lighter of ( Base rate 1400 rs ) NS
50
-
-
... More
36 W LED Fitting (600x600) of Lumilux / Zolux ( Base rate 2200 rs ) NS
44
-
-
... More
36 W Per RM LED Linear light 1.5 m length of Lumilux / Zolux ( Base rate 3500 rs ) NS
40
-
-
... More
25 W LED Fitting (300x300)of Lumilux / Zolux ( Base rate 2100 rs ) NS
20
-
-
... More
15 W LED Wall Bracket Light NS
1
-
-
... More
18 W LED Down Lighter Lumilux / Zolux ( Base rate 1600 rs ) NS
45
-
-
... More
11 W LED Mirror Light Lumilux / Zolux ( Base rate 500 rs ) NS
6
-
-
... More
Supplying, of 1200mm sweep A.C. ceiling fans complete with fan motor, blades, down rod, canopy fan hook etc. as required .NS ( Base rate 1800 rs )
52
-
-
... More
Supplying, of 1200mm sweep A.C. remote operated ceiling fans complete with fan motor, blades, down rod, canopy fan hook etc. as required .NS ( Base rate 6500 rs ) Model name :- Havells Stealth Air Ceiling Fan (Pearl White)
10
-
-
... More
Supplying of under note sizes of heavy duty exhaust fans complete with fan motor, blades fixing frame, louver etc as required . 450 mm exhaust fan 900 RPM NS ( base rate 2400 rs )
7
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements