Maharaja Agrasen Medical College Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 8,80,000Document Cost
₹ 15,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_HRY_322916_2Bid Award Id
ViewTender No
MAMC/Engg./1182 Dated 21-10-2023Tender Authority
Maharaja Agrasen Medical College ViewPurchaser Address
-Website
http://https://www.mamc.edu.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Earth filling in Plinth under floors Campus Brought from out side and laying in 20cm layers ramming watering and consolidation complete in all respect in all leads. (N.S.)
1018.34
-
-
Providing and injecting chemical emulsion for PRE-sqm CONSTRUCTIONAL anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, along with the external perimetre of building, expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured) using Chlorpyriphos/ Lindane emulsifiable concentrate of 20%. (HSR 4.39)
440.1
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundation , Footing , Base For Column. (HSR 6.29.1)
311.59
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts (HSR 6.29.3)
873.34
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (HSR 6.30.2)
326.78
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers. (HSR 6.30.5)
1217.04
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform (HSR 6.30.3)
1792.46
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases (HSR 6.30.7)
65.54
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls (Under 20 cm wide) (HSR 6.30.16.1)
1168
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : Cement Concrete 1:4:8 with stone aggregate 40mm nominal size in foundation and plinth. (HSR 6.1.6)
64.55
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix is recoverable.However no extra payment shall be made if excess cement is used as per design mix).All works up to plinth level (HSR 6.25.1)
256.6
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix is recoverable.However no extra payment shall be made if excess cement is used as per design mix).All works above plinth level up to floor IV level (HSR 6.25.2)
431.14
-
-
Extra for R.C.C./ B.M.C/ R.M.C. work above floor IV level for each three floors or part thereof. (HSR 6.27)
247.63
-
-
Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). All works above plinth and up to floor IV level M-20 grade plain cement concrete (cement content considered @ 300 kg/cum) (HSR 6.22.1)
9.93
-
-
Extra for R.C.C./ B.M.C/ R.M.C. work above floor IV level for each three floors or part thereof. (HSR 6.27)
12.75
-
-
Providing and laying damp-proof course with cement concrete 1 :2:4 (1 cement : 2 coarse sand (zone-Ill): 4 graded stone aggregate 12.5mm nominal size) 50 mm thick (HSR 6.8.1)
41.87
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-1 O of approved quality using 1. 7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. (HSR 6.10)
41.87
-
-
20 mm thick cement plaster damp-proof course 1 :3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded:Vertical (HSR 6.12.1)
259
-
-
Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) (outer wall) below outer pending (HSR 7.21.2)
54.96
-
-
Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.22.2)
283.34
-
-
Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.22.2) (Note 1% Extra for each three Additional floor Brick work)
169.42
-
-
Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level upto floor IV level.Cement mortar 1:4 (1 cement :4 coarse sand) (HSR 7.28.2)
522.34
-
-
Extra for half brick masonry in superstructure, above floor IV level for every three floors or part thereof (HSR 7.29)
261.17
-
-
Extra for providing and placing in position 2 Nos. 6 mm dia. M.S. bars at every third course of half brick masonry. (HSR 7.30)
783
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (HSR 9.18)
12
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 75x75 mm deep chase (HSR 9.17.1)
120
-
-
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fibre acoustical fleece.and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fibre acoustical fleece. (HSR 9.47.2)
180.63
-
-
Providing and laying of screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping (HSR 10.4)
1138.59
-
-
Conglomerate floor 40mm thick cement Concrete topping 1:2:4. ducts (HSR 10.8)
3.96
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.size of tiles 600mmx600mm. NITCO, KAJA-RIA, SOMANI, ORIENT & JOHNSONS (HSR 10.63.2)
1551.26
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (HSR 10.67.2)
186.15
-
-
Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.size of tiles 600mmx600mm. (HSR 10.70.2)
1737.42
-
-
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S :15622 (thickness to be specified by the manufacturer)) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.58)
796.29
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in Charge: Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (HSR 10.49.1)
406.11
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (HSR 10.50.1)
73.89
-
-
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. (HSR 10.42)
195.3
-
-
Providing and fixing granite stone in all shades 15mm to 18 mm thick in sqm skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc. (HSR 10.51)
49.34
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platfonn, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete (HSR 8.28)
48
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work (HSR 8.27.2)
189.01
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:.(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). (HSR 28.14)
180.63
-
-
15 mm cement plaster on rough side of single or half brick wall of mix:1 :4 (1 cement: 4 coarse sand) (HSR 11.9.1)
2347.84
-
-
Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge (HSR 11.17)
541.72
-
-
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge 15 mm wide and 15 mm deep groove (HSR 11.40.1)
810
-
-
Providing and finishing 12mm thick cement plaster 1:6. (HSR 11.5.4)
5016.67
-
-
10 mm thick cement plaster 1 :3 (1 cement: 3 fine sand) (HSR 11.4.2)
1698.99
-
-
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3m or part thereof. (HSR 11.35)
1173.92
-
-
Providing and applying two coats white cement based putty of approved brand and manufacturer,over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (HSR 11.58)
9063.49
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : water thinnable cement primer (HSR 11.67.1)
9063.49
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied) (HSR 11.95.1)
7364.5
-
-
Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade(Two or more coat on new work) (HSR 11.71.1)
9063.49
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work(ON PRESSED STEEL DOOR FRAMES) (HSR 11.73.1)
205.2
-
-
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete: 20 mm dia (HSR 12.48.2)
86.4
-
-
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.3.1.2)
237.6
-
-
Profile C Fixing with carbon steel galvanised dash fastenerof required dia and size (to be paid for separately) (HSR 13.3.2.2)
429.84
-
-
Profile E Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.3.3.2)
152.1
-
-
Providing and fixing carbon steel galvanised (minimum coating 5micron) dashfastener of10 mm dia double threaded 6.8grade (yield strength 480N/mm2), counter sunk head, comprising of 10mm dia polyamide PA6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.SIZE 10X150MM (HSR 13.5.3)
1168
-
-
Providing and fixing ISI marked flushdoor shutters conforming to IS:2202(PartI) NON decorativetype,core of block board construction with frame of1st class hardwood and well matched teak 3ply veneering with vertical grains or crossband sand face veneers on both faces of shutters.35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws (HSR 12.37.1)
308.02
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 300 mm (ozone, godrej, dorma, haffale, doorset.) (N.S.)
318
-
-
Providing and fixing bright SS tower bolts (barrel type) with necessary screws etc. complete 300 mm x 10 mm (ozone, godrej, dorma, haffale, doorset.) (N.S.)
168
-
-
Providing and fixing bright finished SS bottom tower bolts with necessary screws etc. complete :: 200 mm x 10 mm (ozone, godrej, dorma, haffale, doorset.) (N.S.)
168
-
-
Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick (HSR 12.12.2)
616.03
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm (HSR 12.98.1)
24
-
-
Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:150x10 mm (HSR 12.99.4)
24
-
-
Providing and fixing aluminium e xtruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS: 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1 000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (HSR 12.89)
48
-
-
Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125mm (HSR 12.102.1)
24
-
-
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300X16MM (N.S.)
146
-
-
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :200X16MM (N.S.)
24
-
-
Providing and fixing ISI MARKED bright finished STAINLESS STEEL hanging type floor door stopper with necessary screws, etc. complete. (ozone, godrej, dorma, haffale, doorset.) (N.S.)
146
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) (HSR 12.177.1)
222.79
-
-
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 :t 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all comers, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Fixed window/ ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 :t 0.2 mm and single glazing bead of appropriate dimension. (Area up to 0.75 sqm) (ENCRAFT, FENESTA, AIS) (HSR 12.132.1)
21.6
-
-
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded lnline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) crescent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all comers, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding door with fly proof S.S wire mesh (Two Nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm up to 5.00 sqm) (ENCRAFT, FENESTA, AIS) (HSR 12.136.2)
188.23
-
-
Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x B mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two Nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window up to 1.75 sqm). ) (ENCRAFT, FENESTA, AIS) (HSR 12.134.2)
37.44
-
-
Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. (HSR 12.141) (ENCRAFT, FENESTA, AIS)
122
-
-
Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete. (HSR 12.142) (ENCRAFT, FENESTA, AIS)
122
-
-
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: Kiln seasoned and chemically treated Hollock wood (HSR 12.19.1.1.2)
52
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Fixed portion (Powder coated aluminium (minimum thickness of kg powder coating 50 micron) (HSR 12.157.1.2)
255.78
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of kg powder coating 50 micron) (HSR 12.157.2.2)
79.38
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
(a) Pre-laminated particle board with decorative lamination on both sides (HSR 12.158.2)
32.4
-
-
Providing and fixing ISi marked, IS: 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete:100x75x3.50 mm (HSR 12.56.2)
72
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (HSR 12.80)
144
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.MS TUBE (HSR 13.42.1)
2065.92
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.:In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work. (HSR 13.29.2)
5859
-
-
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect. Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Thermo-echanically Treated bars of grade Fe-500D kg or more. (HSR 6.33.6)
42089.77
-
-
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level. Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, over1aps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (Thermo-Mechanically Treated bars of grade Fe-500D or more.) (HSR 6.34.6)
105432.91
-
-
Providing & fixing of cuboard 2'-0 deep made up of water proof , terminte treatment ,WPC 18 MM thick board MIN DENSITY OF 650 KG/CUM of Reputed Brands (Black cobra, alex, ikon, floresta, trex, SV Pro woods, alstone, HKS ) for Sides , Top , Bottom & Horizontal & Vertical shelves of box type. As per Drawings. The front Openable shutters shall be 25mm thick WPC board. Which shall be covered with 1.0 mm laminate complete area of wpc both side approved colour and makes . The exposed edge of shutter & shelves shall be covered with edge binding tape matching with laminate colour . The shutter shall be fixed to the Cupboard Box with S.S. Continous Hinges 3/4"X3/4" or by stud 6 No. in each shutter. The item shall Iinclude all Accessories with Cupboard Handle 1'-0" long and (2 no.)150 mm Tower Bolts and (4no.) Hanging rods, Cupboard lock and 40mmX40mm (6 NO.) S.S. Studs for each Cupboard. This item is inclusive of all accessories, packing charges, Transportation, Labour,GST ,TAXES, installation complete in all respect as approved by architect and engineer incharge at all floors/ ht. 1mm laminate shall be pasted the complete area of WPC board of both sides and all SS fitting that is catcher, lock, slider for drower etc. as instruction by Engineer in charge. (All SS fitting of ozone, godrej ,dorma, haffale, doorset) only front area shall be measured for payment. (NS)
225.79
-
-
Designing, fabricating, testing, installing and fixing in position CurtainWall with Aluminium Composite Panel Cladding, with open grooves forlinear as well as curvilinear portions of the building , for all heights and all levels etc. including: Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoro polymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of allsamples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall withaluminium composite panel cladding, cleaning and protection ofthe curtain wall with aluminium composite panel cladding till thehanding over of the building for occupation. Aluminium frame 1" x 1.5" 14 gauge 2' centre to centre shall be fixed with required screw/fastner as per drawings are also including in this item and also include required scaffolding at all heights and level. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. Make : Alutech, Aludecor, Alstone, Century. (N.S.)
287.58
-
-
Providing and fixing of Teracotta jali blocks (8"x8"x2.5") in ms frame work (1"x1" 14 gauge) placing at center to center (2'x2') and laid with cement based high polymer modified quick set tile adhesive (water based)/special mortar made by manyfacturers. This item is inclusive of all accessories, packing charges, Transportation, Labour installation complete in all respect as approved by architect and engineer incharge at all floors. Raja Tiles, Dalal Tiles or as approved by Engineer in charge. (N.S.)
45.6
-
-
Making plinth protection 50mm thick of cement concrete 1 :3:6 (1 sqm cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (HSR 6.13)
55.8
-
-
1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) (HSR 6.1.2)
4.19
-
-
Providing and fixing of 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1 :5 (1 cement : 5 coarse sand) with joints finished flush.10.39.1 Red sand stone (HSR 10.39.1)
55.8
-
-
Brick on end in soil/edging in required pattern with bricks of class designation (HSR 10.36)
93
-
-
Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. 40 mm wide and 4 mm thick (HSR 10.22.1)
93
-
-
Core cutting up to 200mm RCC slab-100mm dia (PH229)
24
-
-
Core cutting up to 200mm RCC slab-125mm dia (PH230)
48
-
-
Core cutting up to 200mm RCC slab-150mm dia (PH231)
24
-
-
Public Health Work Items
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 MM (HSR 22.14.2.1)
24
-
-
Providing and fixing 40mm dia P.V.C. waste pipe for sink or wash basin including all fitting complete in all respect. (NS)
48
-
-
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (HSR 22.209)
48
-
-
Providing and fixing toilet paper holder C.P Brass. (HSR 22.42.1)
48
-
-
Providing and fixing SS towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality. 600 mm long towel rail COMPLETE IN ALL RESPECT (NS)
48
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. (HSR 22.108.1)
240
-
-
Providing and fixing SS grating of approved quality Square type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating complete in all respect. (NS)
120
-
-
Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (HSR 22.33)
48
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous chinaware Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. (HSR 22.1.4)
48
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (HSR 22.15)
48
-
-
Providing and fixing SS Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth complete in all respect. (NS)
72
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter (HSR 22.102.2)
48
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with LP./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 gms (HSR 22.124.5)
12
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore (HSR 22.104)
48
-
-
Providing and fixing jet spray with 2'-6" long PVC pipe. (HSR 22.38)
48
-
-
Providing & Fixing in position C.P./ SS Khunti of approved make (to the approval of Engineer-in-Charge) fixed into wall with CP brass screws and rawl plugs etc. complete in all respect. khunti with 6 pegs (NS)
48
-
-
P/F in position PVC flexible tube connection of approved make (to the approval of Engineer-in-Charge) Complete in all respect.b) PVC tube connection of size 15mm x 450mm with CP brass nut. (HSR 22.101.2.1)
240
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm (HSR 4.16.1.3)
180.6
-
-
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. (HSR 22.222)
Single Socket Type B: 110mm old SWR UPVC pipe lines laid complete. (HSR 22.222.2.2)
798
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. (HSR 9.60)
84
-
-
SEWERAGE SYSTEM (INTERNAL WORKS) (HSR)
Providing & Fixing P Trap with 110mm x 110mm The rate includes the complete cost of clamping as per the detailed drawing complete in all respects. (NS)
48
-
-
Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater)
A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-incharge. 25 Litres capacity (HSR 22.216.1)
48
-
-
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B : 160mm old SWR UPVC pipe lines laid complete (HSR 22.222.2.1)
126.6
-
-
1 :4: 8 (1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) (HSR 6.1.6)
7.6
-
-
Constructing brick masonry inspection Chamber sizes as given below upto 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design.
(b) Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping) (HSR 21.84.2)
6
-
-
M) Masonry Chambers
EXTRA FOR EVERY 0.30 METER DEPTH OF INSPECTION CHAMBER
b) 450mm X 600mm (HSR 21.85.2)
6
-
-
Constructing brick masonry inspection Chamber sizes as given below upto 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design.
(c) Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab) (HSR 21.84.3)
12
-
-
M) Masonry Chambers
EXTRA FOR EVERY 0.30 METER DEPTH OF INSPECTION CHAMBER
c) 600mm X 900mm (HSR 21.85.3)
12
-
-
Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar complete to the requirement of the Engineer in-charge (HSR 21.87.1.1)
10
-
-
a) SINGLE ROAD GULLY CHAMBER
i) size 610 mm x 457mm x 800mm (HSR)
Reduction for every 7.5 cm depth of road gully chamber from the rate of item no.29.87 above. a) SINGLE road gully chamber (HSR 21.88.1)
10
-
-
Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar complete to the requirement of the Engineer in-charge (HSR 21.87.2.1)
1
-
-
b) DOUBLE ROAD GULLY CHAMBER
i) size 1448mm x 457mm x 800mm (HSR)
Reduction for every 7.5 cm depth of road gully chamber from the rate of item no.29.87 above. a) DOUBLE road gully chamber (HSR 21.88.2)
1
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With sewer bricks conforming to IS : 4885 (HSR 22.166.2.2)
12
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With sewer bricks conforming to IS : 4885 (HSR 22.166.2.2)
12
-
-
20mm I/d of pipeline (HSR 20.30.2)
648
-
-
25mm I/d of pipeline (HSR 20.30.3)
72
-
-
50mm I/d of pipeline (HSR 20.30.6)
30
-
-
Providing and fixing of gun metal gate valve with C.I. Wheel of approved quality (screwed end) (HSR 22.98)
40mm I/d of pipeline (HSR 22.98.4)
1
-
-
50mm I/d of pipeline (HSR 22.98.5)
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (HSR 22.86)
20 mm nominal outer dia Pipes (HSR 22.86.2)
648
-
-
25 mm nominal outer dia Pipes (HSR 22.86.3)
72
-
-
32 mm nominal outer dia Pipes (HSR 22.86.4)
10
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (TERRACE) (HSR 22.87)
25 mm nominal outer dia Pipes (HSR 22.87.3)
72
-
-
32 mm nominal outer dia Pipes (HSR 22.87.4)
132
-
-
40 mm nominal outer dia Pipes (HSR 22.87.5)
30
-
-
50 mm nominal outer dia Pipes (HSR 22.87.6)
30
-
-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : (HSR 22.89)
20 mm dia nominal bore (HSR 22.89.2)
300
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (HSR 22.94)
20 mm nominal bore (HSR 22.94.2)
130
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (HSR 22.106.1)
192
-
-
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:-Kitchen sink with drain board: 510x1040 mm bowl depth 250 mm (HSR 22.10.1.1)
24
-
-
Providing and fixing CP BRASS soap Dish Holder (NS)
48
-
-
Providing and fixing CP BRASS towel Ring. (NS)
48
-
-
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. (HSR 22.211)
48
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (HSR 22.109)
250
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (HSR 22.107.1)
72
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR 22.181)
24000
-
-
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. (HSR 30.79)
24
-
-
Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness up to 6" (six inches) for passing drain pipe and repairing the hole after insertion of drain pipe etc. including finishing-complete so as to make it leak proof. Drain pipe of 150mm internal dia (HSR 30.82.1)
48
-
-
PRIVIDING AND FIXING OF 6KG PRESSURE DOOR BEND (110 MM DIA) COMPLETE IN ALL RESPECT. MAKE: FINOLEX, SUPREME, PRINCE ETC. (NS)
72
-
-
PRIVIDING AND FIXING OF 6KG PRESSURE PLAIN BEND 110 MM DIA COMPLETE IN ALL RESPECT. MAKE: FINOLEX, , PRINCE SUPREME. (NS)
72
-
-
PRIVIDING AND FIXING OF 6KG PRESSURE PLAIN TEE 110 MM DIA COMPLETE IN ALL RESPECT. MAKE: FINOLEX, SUPREME, PRINCE. (NS)
72
-
-
PROVIDING AND FIXING OF 6KG PRESSURE PLAIN Y JUNCTION 110 MM DIA COMPLETE IN ALL RESPECT.MAKE: FINOLEX, SUPREME, PRINCE. (NS)
72
-
-
PROVIDING AND FIXING OF 6KG PRESSURE COUPLER 110X100 COMPLETE IN ALL RESPECT. MAKE: FINOLEX, SUPREME, PRINCE. (NS)
72
-
-
PROVIDING AND FIXING OF 6KG PRESSURE PTRAP 110X100 MM COMPLETE IN ALL RESPECT. MAKE: FINOLEX, SUPREME, PRINCE. (NS)
72
-
-
PROVIDING AND FIXING OF SS FLOOR JALI DOUBLE STAINLESS 110 DIA COMPLETE IN ALL RESPECT. MAKE: ESSESS, JAQUAR, CERA. (NS)
72
-
-
Electrical Work Items
Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. (HSR-23.4.1)
GROUP-A (HSR 23.4.1.1)
1048
-
-
Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. (HSR-23.4.2)
GROUP-A (HSR 23.4.2.1)
48
-
-
Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch. HSR-23.4.3.1
GROUP-A (HSR 23.4.3.1)
1048
-
-
Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required (HSR-23.4.4.1)
GROUP-A (HSR 23.4.4.1)
301
-
-
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required (HSR-23.4.5.1)
GROUP-A (HSR 23.4.5.1)
168
-
-
Supply and erection of sheet steel enclosures 1 pole/2 pole/4 pole on walVon existing pedestal complete as required. (HSR-23.22.3)
S.P.N. or DP enclosure suitable for DP MCB (HSR 23.22.3.2)
72
-
-
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. (HSR-23.8.10)
1 & 2 Modules including combined plate for Telephone and data (HSR 23.8.10.1)
81
-
-
3 Modules (15Amp Socket for AC) (HSR 23.8.10.2)
48
-
-
4 Modules (HSR 23.8.10.3)
6
-
-
6 Modules (for POWER SWITCH SOCKET) (HSR 23.8.10.4)
168
-
-
S.P.N. or DP enclosure suitable for DP MCB (HSR 23.22.3.2)
72
-
-
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. (HSR-23.8.11)
5 amp 1 way switch (HSR 23.8.11.1)
360
-
-
5 amp 2 way switch (HSR 23.8.11.2)
48
-
-
15 amp 1 way switch (HSR 23.8.11.3)
168
-
-
5 amp Socket (HSR 23.8.11.4)
301
-
-
15 amp 6 pin Socket (HSR 23.8.11.5)
168
-
-
Blanking plate (HSR 23.8.11 .10)
100
-
-
PVC CONDUITING FOR CIRCUIT WIRING
Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. (HSR-23.7.6)
PVC pipe of 20 mm dia. (HSR 23.7.6.1)
900
-
-
PVC pipe of 25 mm dia. (HSR 23.7.6.2)
3752
-
-
PVC pipe of 32 mm dia. (HSR 23.7.6.3)
1344
-
-
PVC pipe of 40 mm dia. (HSR 23.7.6.4)
576
-
-
Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. (HSR-23.5.6)
1 run of Size 1.50 Sqmm(1/1.40mm) (HSR 23.5.6.1)
5240
-
-
1 run of Size 2.50 Sqmm(1.1.80mm) (HSR 23.5.6.2)
3752
-
-
1 run of Size 4 Sqmm(1/2.24mm) (HSR 23.5.6.3)
1344
-
-
1 run of Size 6 Sqmm(1/2.80mm) (HSR 23.5.6.4)
576
-
-
Supply and erection of suitable MS/GI Box covered with 5 mm thick Bakelite sheet as below (HSR-23.8.3)
75 mm x 75 mm x 60 mm deep M.S. box (HSR 23.8.3.1)
96
-
-
100 mm x 100 mm x 60 mm deep M.S. box (HSR 23.8.3.2)
72
-
-
180 mm X 100 mm X 60 mm deep M.S. Box (HSR 23.8.3.3)
48
-
-
200 mm X 150 mm X 60 mm deep metal box (HSR 23.8.3.4)
48
-
-
Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cmlong M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. (HSR-23.8.4)
96
-
-
step type Fan Regulator 2 modules 300 watt (23.8.11.7)
96
-
-
Erection of cabin fan complete with necessary earthling including carriage from PWD store to the site of work. (HSR-23.10)
96
-
-
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. (HSR-23.8.10)
1 & 2 Modules including combined plate for Telephone and data (HSR 23.8.10.1)
24
-
-
3 Modules (HSR 23.8.10.2)
81
-
-
WIRING FOR LV SYSTEM
Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. (HSR-23.23.8)
2 pair telephone wire (HSR 23.23.8.1)
200
-
-
4 pair telephone wire (HSR 23.23.8.2)
140
-
-
Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required (HSR-23.23.9)
120
-
-
Supplying and drawing of 1 no UTP 4 pair CAT Sa LAN Cable in the existing surface/recess MS/PVC conduit as required (HSR-23.23.10)
120
-
-
LV OUTLET BOX ASSY.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. (HSR-23.8.11)
Telephone Socket outlet modular type (HSR 23.8.11.8)
7
-
-
Blanking plate (HSR 23.8.11 .10)
40
-
-
RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type (HSR 23.8.11 .11)
24
-
-
DISTRIBUTION BOARDS
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. (HSR-23.22.4)
TPN DB Horizontal type Double Door 4 way (8 incoming and 3phase*4 outgoing) For Flood Lights on Terrace and Acs in rooms. (HSR 23.22.4.5)
24
-
-
TPN DB Horizontal type Double Door 6 way (8 incoming 3phase*6 outgoing) -For Light (HSR 23.22.4.6)
24
-
-
TPN DB Horizontal type Double Door 8 way (8 incoming 3phase*8 outgoing)-For Power (HSR 23.22.4.7)
2
-
-
MCBs
Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- (HSR-23.22.5)
6 amp. to 32 amp Single Pole (HSR 23.22.5.1)
72
-
-
6 amp to 32 amp. Double POLE (HSR 23.22.5.3)
48
-
-
40 amp to 63 amp. MCB's FOUR POLE (HSR 23.22.5.8)
48
-
-
CABLE TRAY
Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. (HSR-23.23.6)
MS perforated cable tray painted with powder coating 375 X 50 X2mm (HSR 23.23.6.3)
76
-
-
CABLING
Supply of LT Cables
4 x 6 Sq mm Aluminum armoured cable (N.S.)
200
-
-
4 x 10 Sq mm Aluminum armoured cable (N.S.)
400
-
-
4 x16 Sq mm Aluminum armoured cable (N.S.)
45
-
-
3.5x35 Sq mm Aluminum armoured cable (N.S.)
45
-
-
3.5x120 Sq mm Aluminum armoured cable (N.S.)
100
-
-
3.5x240 Sq mm Aluminum armoured cable (N.S.)
300
-
-
CABLE LAYING
Laying of underground cable 0. 75 metre below ground level covered with sand and bricks including excavation and refilling of trenches (HSR 24.2.2)
185 sqmm to 240 sqmm 3 to 3½ Core (HSR 24.2.2.4)
200
-
-
Laying and fixing of cable on surface/ cable tray etc as required (HSR 24.2.5)
2.5 Sq mm to 10 Sq mm 2 to 4 Core (HSR 24.2.5.1)
100
-
-
16 Sq mm to 35 sqmm 2 to 4 Core (HSR 24.2.5.2)
90
-
-
185 sqmm to 240 sqmm 3 to 3½ Core (HSR 24.2.5.4)
50
-
-
Laying of underground cable in pipe /existing open/closed trench etc as (24.2.4)
2.5 Sq mm to 10 sqmm 2 to 4 Core (HSR 24.2.4.1)
300
-
-
50 Sq mm to 150 sqmm 2 to 4 Core (HSR 24.2.4.3)
150
-
-
185 sqmm to 240 sqmm 3 to 3½ Core (HSR 24.2.4.4)
300
-
-
WIRE TERMINATIONS
Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. (HSR-24.2.6)
1.5 sqmm (HSR 24.2.6.1)
10
-
-
2.5sqmm (HSR 24.2.6.2)
500
-
-
4.0sqmm (HSR 24.2.6.3)
492
-
-
CABLE GLANDS
Supply and erection of suitable compression type brass cable glands for underground Cable :- (HSR-24.2.7)
Up to 6.0 sqmm Cable 2 to 4 Core (HSR 24.2.7.1)
10
-
-
10 sqmm to 16s qmm Cable 2 to 4 Core (HSR 24.2.7.2)
48
-
-
25 sqmm to 50 sqmm Cable 2 to 4 Core (HSR 24.2.7.3)
12
-
-
120 sqmm to 185 sqmm Cable 3 to 3.5 Core (HSR 24.2.7.5)
2
-
-
240 sqmm to 185 sqmm Cable 3 to 3.5 Core (HSR 24.2.7.6)
4
-
-
CABLE LUGS
Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work . (HSR-24.2.8)
4 sqmm to 6 sqmm (HSR 24.2.8.2)
35
-
-
10 sqmm (HSR 24.2.8.3)
192
-
-
16 sqmm (HSR 24.2.8.4)
55
-
-
35 sqmm (HSR 24.2.8.6)
30
-
-
95 sqmm (HSR 24.2.8.9)
2
-
-
120sqmm (HSR 24.2.8.10)
10
-
-
240sqmm (HSR 24.2.8.13)
12
-
-
CABLE ROUTE MARKER
Supply and erection of cable route marker made of 50 cm long 1 O mm dia M.S. Rod welded/riveted at the top with 1 O cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level (HSR-24.2.10)
15
-
-
HDPE PIPE
S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. (HSR-24.5.2)
DWC/HOPE pipe 40/32 mm outer dial inner dia (HSR 24.5.2.1)
200
-
-
DWC/HDPE pipe 50/40 mm outer dial inner dia (HSR 24.5.2.2)
50
-
-
DWC/HDPE pipe 90/75 mm outer dial inner dia (HSR 24.5.2.4)
100
-
-
DWC/HDPE pipe 120/105 mm outer dial inner dia (HSR 24.5.2.5)
200
-
-
EARTHING
Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. (HSR-24.1.3)
6
-
-
Earthing with tinned copper earth plate 6D0mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. (HSR-24.1.4)
2
-
-
Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode. (HSR-24.1.5)
8
-
-
Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. (HSR-24.1.7)
30
-
-
Providing and fixing 25 mm x 3mm 6 gauge G.I. wire on surface or in recess for connections etc. as required with all labour and material. (HSR-24.1.8)
160
-
-
Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. (HSR-24.1.9)
10
-
-
Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. (HSR-24.1.10)
75
-
-
Supply. Erection and fixing of 12mm thick ply wood board having a circular/rectangular hole etc as required including the cost of making hole, nuts and bolts, painting and other petty material with all labour etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. (HSR-23.13)
200
-
-
Supply, installation, testing and commissioning of following MV cubicle type totally enclosed, Free standing type, powder coated, dust, damp and vermin proof, outdoor type Distribution Board/Panel complete with2 mm thick CRCA SHEET with 75mmx40mmx5mm chanel iron base fram, for operation on 3 phase 4 wire 50Hz A.C. supply, busbars, MV danger notice plate, interconnections with suitable capacity aluminium leads/ solid aluminium strips/ rods, connection of incoming and outgoing cables with thimbles, and having following incoming and outgoing switchgears complete as per technical specification and as required. MCCB Make : Schenider, L&T, indoasian , PANEL Makes- Indoasian, Havells, Shalvi Enterprises,
INCOMING : Accommodating 1 no.800Amp.415 volts,50 KA FP MCCB with thermal magnetic release having variable current settings of O/L, S/C protection and E/F Module with suitable size of cable chamber to receive incoming cable in sheet steel cubical and comprising the following. (MCCB cost include)
ON & OF indicator
Neutral Link
96 sqm. flush mounting AVF digital meter 0-1000amp. , 0-500 volt Make- AE/IMP/L&T with control MCB and selector switch.
A set of LED lamps (3 nos.) phase indicating light.
3 Nos. current transformer of AE /IMP/concord make 15 VA burden an accuracy class 'C' and having rating 800/5 amp. For Meter.
Bus bars of capacity of 800 amps. 415 Volts with 4 copper bars insulated with PVC sleeving suitable size of copper bars .
Solid copper connection of required capacity from MCCB to bus bars.
OUTGOING : L.T pannel should be having sufficient space for accommodating the folowing switches/ M. C.C.B's including the cost of the MCCB and metering system as required.
2 Nos. 400 amp. 3 pole35 KA 3 phase MCCB 2 Nos. 200amp. 3 pole35 KA 3 phase MCCB 2Nos. 100 amp. 3 pole35 KA 3 phase MCCB 4 Nos. 63 amp. 3 pole 25 KA 3 phase MCCB All MCCB rotory control duly interlocked .
CONNECTIONS : - Solid copper connection of required capacity bus bar to M.C.C.B. and from M.C.C.B. to outgoing cable having provision for connecting at least 12 cables including the cost of suitable size Al. Thimble ,brass cable gland..
The pannel should be completed with all inter wiring with PVC copper wire and testing etc.rotary handle in each MCCB to be provided. (N.S.)
1
-
-
Supply, installation, testing and commissioning of following MV cubicle type totally enclosed, Free standing type, powder coated, dust, damp and vermin proof, indoor type Distribution Board/Panel /electricity meter panel complete with1.6 mm thick CRCA SHEET with 75mmx40mmx5mm chanel iron base fram, for operation on 3 phase 4 wire 50Hz A.C. supply, busbars, MV danger notice plate, interconnections with suitable capacity aluminium leads/ solid aluminium strips/ rods, connection of incoming and outgoing cables with thimbles, and having following incoming and outgoing switchgears complete as per technical specification and as required. MCCB Make : Schenider, L&T, indoasian , PANEL Makes- Indoasian, Havells, Shalvi Enterprise
INCOMING : Accommodating 1 no 300Amp.415 volts,50 KA FP MCCB with thermal magnetic release having variable current settings of O/L, S/C protection and E/F Module with suitable size of cable chamber to receive incoming cable in sheet steel cubical and comprising the following. (MCCB cost include)
ON & OF indicator
Neutral Link
96 sqm. flush mounting AVF digital meter 0-500amp. , 0-500 volt Make- AE/IMP/L&T with control MCB and selector switch.
A set of LED lamps (3 nos.) phase indicating light.
3 Nos. current transformer of AE /IMP/concord make 15 VA burden an accuracy class 'C' and having rating 500/5 amp. For Meter.
Bus bars of capacity of 500amps. 415 Volts with 4 copper bars insulated with PVC sleeving suitable size of copper bars .
Solid copper connection of required capacity from MCCB to bus bars.
OUTGOING : L.T pannel should be having sufficient space for 12nos electricity meter 3phase 415Volts with all labour and material required for the job complete in all respects.Up to the entire satisfaction of the Engineer-in-charge of the work .
CONNECTIONS : - Solid copper connection of required capacity bus bar to M.C.C.B. and from M.C.C.B. to outgoing cable having provision for connecting at least 12 cables including the cost of suitable size Al. Thimble ,brass cable gland..
The pannel should be completed with all inter wiring with PVC copper wire and testing etc.rotary handle in each MCCB to be provided. (N.S.)
2
-
-
EARLY STREAMER EMISSION LIGHTNING PROTECTION SYSTEM Supply, Erection, Installation & Commissioning of External Lightning Wide Area Protection System based on pro-active Early Streamer Emission (ESE) Technology. No external power source required. Device tested & certified as per NFC17-102 (2011)standards for "Lightning current impulse of 100Ka in 10/135 wave form. CPRI Tested for 70KA, with protection radius standard 45@ meters / Level-IV protection. Including mast for supporting the device. Lightning Strike Recorder-7 digits electro mechanical display to record the lightning current in an IP 67 enclosure with minimum sensitivity of 1500A & maimum capacity of 220KA (8/20µs second waveform.) the Down Conductor which is a 70 Sq. mm flexible, single core PVC insulated copper cable with fiing accessories. advance chemical gel maintenance free earth for the Lightning Protection System, with earth enhancing compounds to treat the soil for lowering the effective ground impedance. Maintenance free earth pits made of ground enhancing reslow grounding minerals - 25 Kg each and 250 microns copper bonded ground rods -3 nos of size 3mtr. length and 25.4mm diameter connected with each other with 25 x 3 mm Copper Strip and high performance earth clamps & polyplastic earth pit chamber with covers. Makes : APS allied power solutions, Schenider, L&T, indoasian , (N.S.)
1
-
-
Supplying ,fixing , testing & commissioning of various type lighting fixtures as follows. Make-Philips/ Surya / Crompton/ BAJAJ
12W LED Recessed Downlighter with pressure die cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver Integra neo . (N.S.)
96
-
-
20 Watt LED surface and wall mounted, 4' aluminium hausing, efficentheatdissipation, (1150x25x40)mm (N.S.)
144
-
-
15Watt Round LED surface Downlighter ,aluminium hausing with integrated driver,NEO HE DL Surface,fixture size in dia 234 mm,Height 57 mm. (N.S.)
266
-
-
Mirror light led 10 watt ,surface and wall mounted batten type. (N.S.)
48
-
-
Supplying and installation 7 Watt led foot light 220/240 V aluminium base,6500K (N.S.)
1
-
-
Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 48" (1200mm) HSR-20.71.1 make- Indoasian/ Havells/ Crompton
96
-
-
Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. HSR-20.72 make- Indoasian, Havells Crompton
72
-
-
10W CELING LIGHT (N.S.)
96
-
-
8 Passenger elevator with 6 stops without machine room as per specification - 282 - make-KONE/OTIS/ SCHINDLER I With 2 Megapixel ip camera MonoSpace R22.1-1 . Warranty 12 months from date of handing over) (N.S.)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements