Maharaja Agrasen Medical College Tender

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. HSR: 10.50 10.50.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. HSR:10.63 10.63.3 Size of Tile 800x800 mm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. HSR:8.27 8.27.2 Granite work

15 mm cement plaster on the rough side of single or half brick wall of mix : HSR:11.6 11.6.1 1:4 (1 cement: 4 fine sand)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete HSR:30.21

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR:11.58

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : HSR:11.67 11.67.1 Water thinnable cement primer

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : HSR:11.97 11.97.1 Two or more coats applied on walls @ 1.25 litre/10 sqm over and including one coat of Special primer applied @ 0.75 litre /10 sqm

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : HSR:5.46 5.46.3 Thickness above 25 mm up to 40 mm

Providing & fixing 25 mm PVC board having minimum density 650 kg/cum of reputed make duly ISI marked on existing frame of student benches on front and seat area including cost of all material and labour for fixing at site complete in all respects. NS

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : HSR:12.157 12.157.1 For fixed portion 12.157.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): HSR:12.177 12.177.1 With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm)

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR:12.98 12.98.2 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR 12.99 12.99.4 150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR:12.102 12.102.1 125 mm

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). HSR 13.8 13.8.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Renewal of old putty of glass panes (length) HSR 30.58

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: HSR:8.32 (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item , as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places.

Providing & fixing of white writing Board as per manufacture specifications of college lecture theater which can serve both writing and projector screen purposed complete in all respects. NS

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :HSR 9.46 9.46.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. HSR:12.80

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete. HSR:12.88

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. HSR:12.12 12.12.2 1.0 mm thick

Electrical Work Items Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. HSR 23.3.6 23.3.6.1 1 run of Size 1.50 Sqmm(1/1.40mm)

23.3.6.2 1 run of Size 2.50 Sqmm(1.1.80mm)

23.3.6.6 2 run of Size 1.50 Sqmm(1/1.40mm)

23.3.6.7 2 run of Size 2.50 Sqmm(1.1.80mm)

23.3.6.8 2 run of Size 4 Sqmm(1/2.24mm)

Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. HSR 23.4.1 23.4.1.3 Group C

Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch HSR 23.4.3 23.4.3.3 Group C

Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required HSR 23.4.4 23.4.4.3 Group C

Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required HSR 23.4.5 23.4.5.3 Group C

Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. HSR 23.7.6 23.7.6.1 PVC pipe of 20 mm dia.

23.7.6.2 PVC pipe of 25 mm dia.

23.7.6.3 PVC Pipe of 32 mm dia.

Supply and Fixing Bakelite sheet on existing MS/GI/wooden/PVC box etc including fixing with brass screws and washers. HSR 23.8.2 23.8.2.2 3mm thick

Supply and erection of suitable MS/GI Box covered with 5 mm thick Bakelite 0 sheet as below HSR 23.8.3 23.8.3.1 75 mm x 75 mm x 60 mm deep M.S. box

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. HSR 23.8.10 23.8.10.1 1 & 2 Modules including combined plate for Telephone and data

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. HSR 23.8.11 23.8.11.1 5 amp 1 way switch

23.8.11.4 5 amp Socket

23.8.11.6 Bell Push

23.8.11.7 step type Fan Regulator 2 modules 300 watt

23.8.11.10 Blanking plate

23.8.11.11 RJ 45 computer data socket outlet for CAT 6 or CAT 6e cable modular type

(HSR23.21)Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling , including cutting/making hole in ceiling including making connections etc as required

(HSR 23.22.4.6)TPN DB Horizontal type Double Door 6 way ( 8 incoming 3phase*6 outgoing)

(HSR 23.22.4.7)TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing)

(HSR 23.22.5)Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:-(HSR 23.22.5.1) 6 amp. to 32 amp Single Pole

(HSR 23.22.5.8)40 amp to 63 amp. MCB's FOUR POLE

(HSR 23.23.10)Supplying and drawing of 1 no UTP 4 pair CAT 6a LAN Cable in the existing surface/recess MS/PVC conduit as required

Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. HSR 23.22.1 23.22.1.3 Triple pole MCCB 16 to 100 amp 25KA

Dismantling old wiring points ( surface wiring system ) including necessary repairs to wall etc. HSR 23.25.1 23.25.1.1 Light, fan or call bell Point including circuit/sub main wiring

Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. HSR 24.1.3

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. HSR 24.1.5

Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.HSR 24.1.7

Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required HSR 24.1.12

Supply, erection, testing of celling fans ISI marked ( as per IS code 374) with satabile GI pipe complete in all respectes complete as per deration of engginering incharge HSR 20.71 HSR 20.71.1 48" (1200mm)

Supply, erection, testing of exhust fan ( as per IS code 374) having a capacity of 45 cubic meter per minute coplete with sutabile GI sheet duting in structre confirming to letest IS speciflcation complete in all respect to satisfaction of engginering incharge. HSR:20.72

Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. HSR 24.2.6 24.2.6.1 1.5 Sqmm

24.2.6.2 2.5 Sqmm

24.2.6.3 4Sqmm

[NS] S/E/T/C of spilt AC copper wire Refrigerant piping thickness- 18 guage (1 mm) (i) Liquid line :- 6.35mm (1/4") (ii) Gas line:- 15.88mm(5/8") 10. Providing and fixing 2.5 sqmm x 4 core coper wire sheathed for connections and communication between indore unit to outdoor unit.

[NS] S/E of Surface type 18 watt a slim trimless surface/ mounted LED edge-lit LEDs with M.S. Powder coated white housing. Total system lumen of 18 watt LED should be 3000 or above in cool day light (2700k to 4000k), Power factor 0.95, CRI (Ra) 80, LED lamp efficiency ≥140 lm/w, Average life 50000hours, complete with all accessories as required with connections.size(Dia)200mm (Industrial) Make Havell's or Philiphs , Crompton

[NS] S/E/I/T/C of 2/2.2 Tons split AC heavy duty Industrial type 3 star Inverter AC with outdoor stand with all labour and material required for the job complete in all respects and 5KVA stabilizer Make- Microtek/ V Guard Split AC Make- Mitsubishi/ O General

[NS] VAC-073 Integrated Digital Podium (HDMI Output) • Metallic Podium powder coated made up from 1.6mm metallic sheet. • Integrated 22” Multi Finger Touch Monitor having HDMI, VGA and USB ports (Acer). • HDMI Multimedia Controller to switch among PC, Laptop and Visualiser. • Ports available on top – 1xXLR • Ports on bottom plate – 1 x USB, Audio, LAN, HDMI out, power socket. • Monitor can be tilted up to 45-55 deg as per user height (Motorised Tilt). • All drawers, sliding trays and doors are lockable • 8 power sockets inside the podium with central power control having MCB. • Drawer for keyboard & mouse. • Single metallic top tray for placing document, laptop etc. • Drawer for document camera • Access doors for servicing both from and back sides of the podium. • Wire manager inside the podium for flexibility of managing additional wires/wiring • AC 220V, 50Hz power operation. • Integrated Computer system having i3 12th Gen Processor, 8GB RAM, 512GB SSD, Win 11 Home (HP) Integrated Audio System comprises of • 1 x Gooseneck Microphone (Ahuja) • 60W Mixer Amplifier (Ahuja) • 4x30W Wall Mount speakers (Ahuja) VAC GK9802 Desktop Visualiser having 8MP Camera, 22x Optical Zoom, 10x Digital Zoom Complete in all respects.