Lala Lajpat Rai University Of Veterinary And Animal Sciences Tender

Providing and fixing thermal insulation layer of 10mm double bubble with both side high resistance aluminium foil for heat insulation to be fixed underneath roof ceiling (under deck insulation) as per approved make (thermal wrap to be 20mm thick) complete in all respect as directed by Engineer in Charge/Architect. The rate should include cost and conveyance of all materials, labour charges, sundries, wastage etc. at all levels complete as per direction and satisfaction of Engineer-in-charge. (C-4)

Earth filling under floors with Good earth (Tibba Sand) brought from outside the building plinth including carriage upto upto any lead to disposal site, loading, unloading and compaction including ramming, watering and consolidation complete in all respect as directed by Engineer in Charge/Architect. (C-5)

Fabricating, Supplying and installations of interlocking PVC slatted tile flooring for Goat & Sheds of size not less than 500 x 600mm of thickness of tile not less than 40 mm and sheet thickness shall of 5 mm with FRP construction and load bearing capacity of 410 Kg per sft , Made out of Prime Polypropylene plastic material with slot size not less than 15 x 65 mm and load bearing capacity of minimum 750 kg per sqm. The tiles shall have interlocking mechanism to keep them in position and shall be suitably bolted down as a permanent fixture. The flooring shall be made specificxally for the purpose of the farm. The tile shall be UV coated and anti skid surface complete in all respect including labour and material required for fixing as per direction by Engineer-in-charge / Architect. (NS-C 7)

Providing and Fixing Stainless Steel tower bolts for door & windows including screws for these fittings complete in all respect as directed by Engineer in Charge. (NS-C 8) a) Size of Tower Bolt 200mm High and 10 mm dia

(NS-C 11) b) Size of Tower Bolt 100mm High and 10 mm dia

Providing and Fixing Stainless Steel Handle of Grade 304 of approved make including screws for fittings complete in all respect as directed by Engineer-in-charge. (NS-C 9) a)Size of Handle 200mm

(NS-C 10) b)Size of Handle100mm

Providing and fixing Stainless Steel sliding bolt with nuts and screws, etc., complete-- Stainless Steel of Grade 304 (NS-C 11) (i) Size 300 mmx 12 mm

Providing and fixing Stainless Steel hanging floor door stopper of Grade SS 304, ISI marked, of required colour and shade, with necessary screws etc. complete. Twin rubber stopper (NS-C 12)

Fabricating, Supplying and Installations of Modular Membrane Curtains of Width ranging from 3.5 mtr to 5.5 mtr including main rolling shaft with two part gear system along with counter weight spring & counter weight rods at bottom of curtain and vertical crank shaft with torsion spring connected to main gear system for opening each curtain individually complete system shall be fabricated and installed as width and opening size of different shed as per individual requirement. The tensile membrane shall be Yarn PES HT 1100 Dtex-Anticapilarity low wick yarns type with weight of 800 g/sqm, tensile strenght of 420/400daN/5cm and Tear strenght of 55/50 daN. The Surface of the membrane shall be treated with 100 PVDF on top & weldable PVDF at bottom. All parts shall be duly primed and coated with PU paint for protection against rust. System shall be easily operatable by manual cranking system complete in all respect including labour and material required for fixing as per direction by Engineer-in-charge / Architect. (NS-C 13)

Supply & installation of frameless glass Door of minimum size 1000 x 2100 with TPTA rails using 12mm thick toughened glass of Saint Gobain / or approved equivalent with die cast patch fitting with stainless steel cover PT 24 , . pull Handle TGDI-H 450 back to back with 350mm CTC, adjustable fixing for glass ,Length =450mm, 25mm dia, -SS304 Finish: mill , floor spring BTS 75V with std. spindle and cover plate. As per DIN EN 1154.(500,000 cyle tested ) , Finish: Satin stainless steel floor stop half dome with 45mm dia, SS locking arrangement with fixing accessories, in satin Chrome ,Final certifications of products should be submitted be from the product manufacturer for the originality of the product and manufacturer should be have its own service team . The above work complete in all respect as per approved drawings and to the satisfaction of Architect /Engineer-in-Charge. (NS-C 14)

Supply and Fixing of Glass partition of 12mm Toughened Glass using slim line Alexa System-45 Frames clip in profile to a height of maximum 3000 MM or as per drawing.The Fixed glass to be fixed using BP45 Profiles at Top & Bottom & fixed frame cleat . The profile size to be 45x25MM to be fixed on to the floor/ ceiling as per the architect design. H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design.In case of Glass overall panel MP45 & BP45 Overpanel Profile to be used. Door frame with alexa EP End Profile frame of size 45X50mm with seals suitable for Glass door Patch Fitting with Top & Bottom patch having standard L=3000mm suitable for double action glass door . The clip in profiles shall be suitable for Glass thickness of 12 mm .The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system complete in all respect as per architectural drawings and the directions of Architect/Engineer-in-charge. All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing. Approved Manufacturer complete in all all respect as per direction of Engineer-in-charge. (NS-C 15)

Supplying of vision glass panels comprising of 6mm vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface #2 of approved colour and shade, all complete for the required performances and the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The Glass shall be assembled in the factory of AIS Glass/workshop of approved processor .“(Payment for fixing of glass Panels in the curtain structural glazing is included in cost of fixing of structural glazing “For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. The properties of Glass of AIS Make are Visible Light Transmission (VLT) of 18%, External Reflection 125 %, Internal Reflection 21%, SHGC .32, U.Value 4.5 W/m2 Degree K.. complete as per the architectural drawings and specifications as per the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). (NS-C 16)

Fabricating, Supplying and installation of stainless steel water trough of grade SS:304 of sheet thickness minimum 3 mm including end pivets and SS supports formed out of SS pipes size not less than 75 x 75 mm for size of 2 mtr. x 500 mm and depth not less than 300 mm and required as per drawings the complete system shall be brush metal finish with electrically welded joints warranted against rusting. The water trough shall be provided with Float Valve & SS fitting intermediate supports of 500 mm c/c of SS angle not less than 3 mm thick. The trough shall be removable from the frame and revolving at the pivets complete in all respect including labour and material required for fixing as per direction by Engineer-in-charge / Architect (NS-C 17)

The wall panels shall be made up of 80 mm thick composite PUF sandwich between 0.6 mm thick Pre-Painted Galvanized Iron Sheet. The panels shall be made of micro ribbing Pre-Painted Galvanized Iron Sheet on both sides with 80mm thick layer of PU foam of density of 40±2 kg/m3 as insulation. The wall panels will have tongue groove arrangement. Pre-Painted Galvanized Iron Sheet shall have minimum coating of 4-5micron epoxy primer and 25micron polyester top coat on the finish surface and 7-8micron primer alkyl base on reverse. The PPGI sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation& installation. The interior and exterior color of panels shall be appliance white color. (NS-C 18)

Providing and fixing at all floors, heights and locations extruded clay tile of size 230x75x20mm (min) of terracotta colour with straight cut edge of approved make having grooves at the back of the tile for fixing to wall with cement mortar 1:4 mixed with liquid water proofing compound to remove capillary action as per manufacturer specifications over rough base plaster 1:3 as part of item maintaining all line, level and plumb. The tiles shall be laid in half over lap bond over this rough base surface with groves 8x8mm in joints in all directions – horizontal, vertical and depth. The grooves shall be maintained with the help of spacers of required size used around each tile. After application the complete finished tile surface should be in line, level and plumb with grooves maintained in all directions. Grouting / pointing of tiles with cement mortar of ratio 1:4 mixed with liquid water proofing compound should be taken up simultaneously alongwith fixing of tiles for proper application. The final finish surface after completion shall be cleaned with diluted HCL solution to remove any stains and cement marks. The vertical surface of tiles cladding shall be given a supporting aluminium angle of size 35x35x5mm at each floor level with the help of anchor bolts (which shall be paid as separately as per item no. 9.01 ). Minimum compressive strength of brick tile shall be 500kg/sqcm, maximum water absorption shall be 7%, Efflorescence should be "NIL". All tiles should have been fired at a kiln temperature not less than 1100 degrees celsius during the manufacturing process. The tile sample shall be got approved from the Engineer-in-charge before application. (NS-C 19)

Providing and laying two course of water proofing treatment with bitumen felt consisting of first course of blown type bitumen grade 85/25 applied hot at 1.20kg per sqm of area for each course second course on surface in foundation, felt type 3 grade I (Hessian base self finished bitumen felt) including preparation of Surface complete. (NS-C 19)

Providing and fixing, jointing union coupling ISI marked of approved make in CPVC pipline complete in respect as per full satisfaction of Engineer-in-charge. (NS PH 1) a) 32mm internal dia meter

b) 40mm internal dia meter (NS PH 1)

c) 50mm internal dia meter (NS PH 1)

d) 65mm internal dia meter (NS PH 1)

P/F in position C.P. jet connection for EWC complete including C.P. plate for jet & CPVC connection for jet point complete in all respect. (NS PH 3)

PROVIDING AND FIXING IN POSITION Granite Stone partition large size 500mmX1200mm of 20mm thick urinal partitions of approved quality or Colours including accessories like right angle bracket,SS screws and PVC Wall plug etc.with all OTHER NECESSARY FITTINGS and complete in all respect as per manufacturer's specfication and satisfaction of Engineer-in-charge including cutting and making good the walls and floor where ever required.(Customized as per drawing & design i.e chamfering, Edge rounding and polishing etc.) (NS PH 5)

Providing and fixing Heavy Class SS grating of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for FD, FT and UT. (NS PH 7) Size 125 mm nominal diameter

Providing and fixing in position Straight Grab Bar (Dia.38mm Lenth 600mm Cat No. Jaquar ACN-1111SM) , Two Wall Horizontal Grab Bar (Cat No. Jaquar ACN-1101S) and Swing Up Grab Bar (Cat No. Jaquar ACN-1115S) complete with all accessories and fitting complete as per direction of Engineer in Charge (NS PH 8)

providing and Fixing in Position Push Type Self closing Stop Cock (Hindware Cat no F310003ACP) complete with all accessories and fitting complete as per direction of Engineer in Charge (NS PH 9)

Providing and fixing in position UPVC SWR specials for soil waste vent or anti syphonage pipes (Supreme or approved equivalent) as per IS-13592 including cutting, jointing with approve solvent,rubber ring etc. and other accessories including cement compound as per IS-14735complete as per manufacturer's specifications and as per direction of the Engineer In-charge. (NS PH 10) For 110 mm o/d pipe line i)Bends

ii) Tee / Door Tee 110x110x110 mm

iii) Collars

iv) Cowls

v) End Cap

vi) Y-Junction

Vii) P-Trap

viii) H.R.B

ix) 110 mm dia Single Junction 110 mm x 110 mm x 110 mm

Providing and Fixing stainless Steel clamps for Roof hanger pipes size 110mm including cost of nuts & bolts, hanger rod and other accessories complete in all respect as per full satisfaction of the Engineer -in-charge (NS PH 11)

Providing and fixing uPVC Floor Traps for soil waste vent or anti syphonage pipes (Supreme or approved equivalent) as per IS-13592 and IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition complete as per manufacturer's specifications and as per direction of the Engineer In-charge. (NS PH 12)

Supplying & fixing 65mm dia Yard hydrant for washing with receiving nipple complete in all respect. (NS PH 13)

Providing, laying, jointing, fixing and testing uPVC SN-8 pipe 'B' class and having thermal stability for hot and cold water supply including all uPVC plain with brass threaded fiting special, tees, bends, sockets, elbows etc. ISI marked of Astral/Finolex fixing pipe with clamps at 1mtr spacing.This include jointing of pipe and fitting with one step uPVC solvent cement in inside and outside building and testing of joints etc. including cutting and threading complete in all respect as per full satisfaction of Engineer-in-charge. (NS PH 14) a) 300 mm dia

b) 250 mm dia

c) 200 mm dia

d) 160 mm dia

Providing and fixing square-mouth PVC gully trap of size 110 x 110 mm complete with brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design complete in all respect to complete Satisfaction of Engineer-in-charge:With Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894. Supreme/Finolex/ Prince or equalent make size 110 x 110 mm Cat no.M142003409 (NS PH -15)

Providing and Fixing Stainless Steel Sprinklers . (NS PH -16)

P/F High Pressure pump centrifugal mono set 3 phase Sprinkler pump including Auto Control Timer Panel as per requirment complete in all respect as directed by Engineer in charge. (NS PH -17) Capacity :- 2 HP Head :-15 mtr LPM :-300

Supplying Installation and Comissioning of Non Clog Impeller Submersible Sewerage Drainage Pump suitable for Pumping Sewerage, Muddy Water, Storm Water including delivery pipe fitting fixture, control panel and all accessories Complete in all respect. (NS PH -18) Capacity : 3 HP Head : 20 Mtr LPM : 220

Supplying Installation and Comissioning of Non Clog Impeller Submersible Sewerage Drainage Pump suitable for Pumping Sewerage, Muddy Water, Storm Water including delivery pipe fitting fixture, control panel and all accessories Complete in all respect. (NS PH -19) Capacity : 7.5 HP Head : 19 Mtr LPM : 600

Supplying Installation and Comissioning of Non Clog Impeller Submersible Sewerage Drainage Pump suitable for Pumping Sewerage, Muddy Water, Storm Water including Panel and all accessories Complete in all respect. (NS PH -20) Capacity : 5 HP Head : 19 Mtr LPM : 500

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & bnozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. (NS FF1) 30 m

PIPES & VALVES Supplying, fixing, testing and commissioning of pipes of following sizes of MS ‘C’ class along with necessary clamps, vibration isolators and fittings such as bends,tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted and buried in ground excavation and refilling etc. as per specification and as required complete in all respect. Note:-The Pipes size 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. (NS FF -1A) 50mm dia. (for External)

FIRE EXTINGUISHER Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and wall suspension braket as required as per specifications. (NS FF -2)

Supply, installation, testing and commissioning ISI marked (IS:15683) portable fire extinguisher, water (gas pressure) type capacity 9 kg with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specifications. (NS FF -3)

Supply, installation, testing and commissioning of 6kg ABC (Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC 90 powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683 as required as per specifications. (NS FF -4)

Mechanical Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked / approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to IS:910 50 Litres (trolley mounted) (NS FF -5)

Providing, Supllying , installing, commissioning and testing Non Self priming, Multi Stage, Horizontal Centrifugal Pumping Set (monoblock booster pumps) with Electric controller level indicator and Auto cutoff, Switch etc. gate valve and non return valve with other accessories complete in all respect (NS FF -6) Discharge-450 LPM Head-20 mtr BHP-2

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. Size 16.00 Sq. mm (7/1.70mm) (NS EL 01)

LIGHT FIXTURES AND FANS Supplying Installation Testing Commisioning & Erection of Dust and water proof LED Luminair (IP65) 40 watt, 4000 Lumen Colour Temperature 6500 (CAT No. LE23-491-XXX-57-XX of Wipro Make) including all petty materials required complete in all respects satisfaction of Engineer in Charge. Make Philips / Wipro / Bajaj make as approved by the Engineer in charge. ( NS EL 1)

Supplying Installation Testing Commisioning & Erection of Security Light of 30 Watt with extruded aluminium housing and all petty material required to complete in all respect as per satisfaction of Engineer in charge. Philips Make CAT No.BRP046 LE 36 CW MR S1 PSU GR Philips / Wipro / Bajaj . ( NS EL 2)

Supplying Installation Testing Commisioning & Erection of recessed downlighter 15 Watt with PDC housing . Luminaire should minimum system lumen output of 1600 lumens. The luminaire should have a color temperature of 6500K and CRI80. Driver of the luminaire shall have THD 10% , PF0.90 and inbuilt surge protection of 2.5kV. Luminaire should atleast have lifeclass of 30k burning hours at L70B50 . The luminaire should be EMI/EMC compliance. ( NS EL 3)

Supplying Installation Testing Commisioning & Erection of LED Bulkhead, 6 watt including all petty material required to complete the job complete in all respect to the satisfaction of Engineer-in-charge. (CAT No. WT202W LED6S NW PSU S2 PC of Philips Make ) (Philips / Wipro / Bajaj make as approved by the Engineer in charge). ( NS EL 4)

Supplying Installation Testing Commisioning & Erection of 2x2 recessed luminaire 30 Watt with CRCA housing and PMMA diffuser. Luminaire should have minimum system efficacy of 100 lumens/W with minimum system lumen output of 3600 lumens. The luminaire should have a color temperature of 6500K and CRI80. Luminaire should have inbuilt PIR sensor with a coverage of 1.5m x 1.5 mt when mounted at 8 ft height. Driver of the luminaire shall have THD 10% and PF0.90. Luminaire should have lifeclass of 50k burning hours at L70B50 . The luminaire should be EMI/EMC compliance.approved make list . ( NS EL 5)

Supplying Installation Testing Commisioning & Erection of 4 ft batten 20 Watt with CRCA housing, high quality PC diffuser with broad end caps. Luminaire should have minimum system efficacy of 120 lumens/W with minimum system lumen output of 2000 lumens. The luminaire should have a color temperature of 6500K and CRI80. Luminaire should be flicker free with ripple 5% and SDCM5. Driver of the luminaire shall have THD 10% and PF0.95. Luminaire should have lifeclass of 50k burning hours at L70B50 having inbuilt surge protection of 4kV. The luminaire should have high low cutoff with auto restart feature at 140- 270V and should be EMI/EMC compliance. . ( NS EL 6)

Supplying Installation Testing Commisioning & Erection of concealed light 8 Watt 1000 lumins and all petty material required to complete the job of Philips Make CAT No. DN295B LED6S-6500 PSU WH Philips / Wipro / Bajaj make as approved by the Engineer in charge. ( NS EL 7)

Supplying Installation Testing and Commissioning of Belted Mist Fan 48'' Complete including all Labour & Material Cost and machinery or equipment required for competing the job complete in all respect as directed by Engineer-in-Charge/Consulatnt DELAVAL/dolar/truemist/havells/crompton ( NS EL 8)

XLPE INSULATED UN-ARMOURED CABLES (LOOSE): ( NS EL E 01) Supply of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per General Specifications:- i) 2.5 Sq mm to 10 Sq mm 2 to 4 Core

16 Sq mm to 35 sqmm 2 to 4 Core

50 Sq mm to 150 sqmm 2 to 4 Core

300 sqmm to 400 sqmm 3 to 3½ Core

XLPE INSULATED HT ARMOURED CABLES (UNDERGROUND): ( NS EL E 02) Supply of Circular Aluminium Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011 working voltage 11KV(E) grade to be laid 1.50 meter below ground level etc. of the required size:- up to 120 sqmm 3 core XLPE Cable

XLPE INSULATED HT ARMOURED CABLES (LOOSE): ( NS EL E 03) Supply of Circular Aluminium Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011 working voltage 11KV(E) grade in the existing trench or pipe:- up to 120 sqmm 3 core XLPE Cable

Supply , Installation and Erection of 115 watt LED street light fitting having system lumen output not less than 3300 lumens and system efficacy of not less than 95 lumens per watt and lumen maintainence of 70% at the end of 50000 burning hours, Power Factor≥0.95 & THD10%, CRI≥70, CCT : 5700K - 6500K, made of high pressure die cast Aluminium/ standard alloy housing with separate optics and control gear compartment, toughened glass protector, permanently sealed and a removable control gear plate, mounting spigot suitable for horizontal mounting (Ø 32 – 42mm) with tilt flexibility upto (+)(-) 15 degrees, operating range 150 – 270V AC supply voltages, surge protection≥10KV with minimum IP:65 Protection. LM 79 report to be submitted for luminaire from NABL accrediated lab and LM 80 for LED source issued by LED manufacture. LED shall have reverse polarity, open and short circuit protection. (Make:- Philips / wipro/ cromptom/ or equivalent). ( NS EL E 04)

ELECTRICAL LT PANELS ( NS EL E 05) Supply, Installation, Testing and Commissioning of wall / free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable tray separating switches compartment and supporting suitable channel duly painted by 2 coat zinc / red oxide primer followed by 2 coats of powder coating in grey or required shade after rising. the panel having PU / Neoprene rubber gasket of not less than 3 mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipments / switch wear. Transport acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The Panel will be complete with control wiring (Copper) and fuse protection. (Only outer area on all sides shall be measured). (Make of panel, EMCO, International Switchgear, Power Associates, ECS Engineering). Having CPRI test certificate breaking capacity 70 KA and ISO 9001-2008. tested from the engineer-in-charge / consultant. Note:- The cost of ACBs, MCCBs, MCBs ,are included in the panel's cost .All acccessories included in the panel cost such as rotary handles, metering etc. MAIN ELECTRICAL PANEL -1 INCOMER FEEDER 14 Nos ACB FP EDO 1000A. MP Based TF 500 KVA ACB FP EDO 1000A. MP Based For Bus Coupler Voltmeter with VSS RYB Indication Lamp LED 1000/5Amp. 15 VA CL-1 Current Transformer 06Amp. Control SP MCB CT Short Link OUTGOING FEEDER 14 Nos MCCB TP 500A.50KA. For Capacitor Panel Spreader Link Rotary Handle MCCB TP 500A.50KA. For Emergency Panel Spreader Link Rotary Handle MCCB TP 500A.50KA. Spreader Link Rotary Handle MCCB TP 500A.50KA. Spreader Link Rotary Handle MCCB TP 250A.36KA. Spreader Link Rotary Handle MCCB TP 250A.36KA. Spreader Link Rotary Handle MCCB TP 250A.36KA. For Spare Spreader Link Rotary Handle MCCB TP 200A.36KA. For Utility Block Spreader Link Rotary Handle MCCB TP 500A.50KA. For Spare Spreader Link Dummy Rotary Handle ENCLOSURE & ACCESSORIES Fabrication in 14/16G.CRCA Sheet Powder Coating in Siemens Gray Shade, 75x40mm.Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable ,Lock, Rubber Gasket, hardware etc. BUS BAR & HARDWARE 2000A. Aluminium Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut-Bolt,Washer ,Hardware etc. WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) Flame Retardent Low Smoke PVC Single Core Copper Wire,Copper Luggs, PVC Sleeve, ferrules, Numbers, Hardware & Labour etc.

SAFETY EQUIPMENT ( NS EL E 07) Supply and Erection of MS angle iron bucket stand which include 6 Nos. fire bucket with 9 ltr. Capacity with stand filling including cost of welding and painting of complete stand & buckets with one coat of red oxide and two coats of approve paint of red color written with fire on the buckets as per fire protection with all labour and petty material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work.

Supply and enameled first aid box of approved make standard medicine complete as per Indian Electriciy Act. ( NS EL E 08)

Supply rubber hand gloves 11 kV grade as per I.S. Code. ( NS EL E 09)

TELEPHONE SYSTEM Supplying, installation, testing and commissioning of Telephone cable in existing HDPE pipe with high density polyethelene insulated, solid annealed high conductivity bare copper with 0.5 mm dia, paired, Jelly filled armoured cables. ( NS TELP. 10)

a) 100 Pair ( NS TELP. 01)

b) 50Pair ( NS TELP. 01)

c) 10Pair ( NS TELP. 01)

Supply,installation,testing and commissioning of main ditribultion frame (MDF) Krone type box. ( NS TELP. 11 ) a) MDF 500 Pairs

TTB 100 Pairs

TTB 10 Pairs

PANEL ENCLOSURE FENCING ( NS EL E - 12) Providing and Fixing Welded Wire Mess Fencing, 10 SWG wire Mess fixed in MS angle Frame of size 50X50X6mm alongwith Openable Door in location as per drawing including 125mm butt hinges, Aldrop , Welding as and where required.The Fencing Frame shall be embeded in floor in PCC Blocks of size 200X200X200mm M-20 Grade. complete fencing shall be finaly finished in two coats of emulsion paint of desired colour over red oxide primer.The Item includes complete work including supplying erection of mild steel fencing alongwith painting and finishing to the entire satisfaction of Engineer in Charge.

11 kv OUTDOOR COMPACT SUB STATION ( NS EL E - 13) Supply, installation, testing and commissioning of distribution net work, 11 kv outdoor compact Sub Station totally factory assembled (non walk in type) consisting of 3 way RMU type, 1 No. 11KV/433V, 500 KVA with Mineral Oil type transformer, 1 set of LT device as under. Approved Makes- Schneider Electric/ ABB/ Voltamp/ C&S. MV COMPARTMENT 11 KV, 630A, 25KA/1Sec indoor type non-extensible, SF6 gas insulated Ring Main unit with sealed pressure system criterion in accordance with the IEC: 60298,62271 - 202.IAC of 20 kA for 1 s for tank and cable box category IAC-AFL . The Switchgear includes the following HV cubicles The indoor non -extensible SF6 insulated RMU fully motorised consist of 1 No. incomer Isolator and 1 no. outgoing Vacuum Breakers with self powered relay for protection of transformer . Rated for Voltage 12kV, 400A, 25 KA for 1 sec. a) Rated voltage should be - 12 KV, b) Rated power frequenecy voltage - 28 KV, c) Rated lightening withstand voltage - 75 KV, d) Rated current for Ring main feeder - 630 amps, e) Rated current for VCB feeder - 400 amps, f) Rated short time current - 25 KA / 3sec, g) Rated short time making current -50 KA, h) Ambient temp ( 0 deg C to +40 deg C), i) Rated internal arc rating - 20 KA for 1 sec for tank and cable box category IAC-AFL , f) RMU shall be provided with protection CTs rated for 30 / 1amps, class - 10P10 accuracy , 2.5 VA burdan for circuit breaker, s) RMU shall be provided with protection CTs rated for 30 / 1amps, class - 10P10 accuracy , 2.5 VA burdan for circuit breaker, s) The circuit breaker feeder shall be self powered/powered by external source and shall be provided with OC+EF protection for transformer and shall have serial port for communication on modbus protocol., y) RMU manufacturere shall have in house NABL accredited testing lab. 2 a). Transformer ( Oil Type) Three phase, Oil type transformer. (Schneider/ ABB/ CG/KOTON/RECHAM)., Standard: IS : 2026, IS 1180 b) Vector group : Dyn11 , c) Rating : 500 KVA, d) Cooling System: ONAN e), Winding: Copper, f) Magnetic Core: Prime grade of M4 or better, g) High voltage : 11KV - 50 Hz, h) System highest voltage : 12kV at the HV side , i) H.V. Power Frequency (KV rms): 28 kV, j) H.V. Impulse withstand voltage (KV peak): 75 kVp, k) The Losses of Transformer should be as per IS 1180 part 1 Efficiency Level 3 / BEE Star 2, i) Transformers shall be designed for 110% continuous overfluxing withstand capability ,m) Temperature rise as per IS1180, n) OTI & WTI,Pressure relief valve (without auxiliary contacts),Skids,Earthing terminal,Lifting lugs,Rating plate,Dehydrating breather 3 LV COMPARTMENT The LV compartment with Degree of protection-IP54 designed for a 50 degree C ambient temperature. The panel is modular, dead front, freestanding, floor mounted and comprises the following equipment a) 433 V air insulated Aluminium busbar having capacity 800A, 50Hz,50KA withstand fault level capacity, MFM - EM6400NG in incommer, b) Incomer - ACB 4 Pole, 1000A, Ics= 50kA Microporcessor based Manually Drawout type ACB with S/C, O/C & earthfault release. Release should be with all Energy parameter & THD% on display with last 50 Trip history.ACB should be communication capable through NFC, blue tooth & Ethernet (all three options). The fault system of Icw= 50 kA for 1 sec with S/C, O/C & earthfault release. APFC Panel- - 1 no MCCB 125A Ics=36kA for APFC Panel 50 Kvar with MPPH Capacitors & Capacitor duty contactors of suitable ratings (Banks- 12.5+12.5+25) Make- Schneider/ L&T/ Siemens 4 Outdoor Enclosure :- The enclosure shall be made of 2.0 mm thickness Galvanized Sheet Steel tropicalised to meet Indian weather conditions including all the partition sheets & doors.The base of the enclosure shall be of 4.0 mm thickness Hot Dip Galvanized Sheet Steel to ensure rigidity for easy transport & installation. The entire Package Substation shall be Factory Assemble & Factory Fitted. The enclouser shall have IP54 degree of protection for HT & LT switchgear compatment IP34 degree of protection for Transformer compartment. The Enclosure to be tested for Internal Arc fault test to the tune of atleast 20 KA for 1 second adhering to as per latest IEC 62271-202.The temperature rise test on enclosure for K10class.The enclosure exterior shall be powder courted.The compartment illumination lamp with door operated switch shall be provided for MV & LV comparatment.