Lala Lajpat Rai University Of Veterinary And Animal Sciences Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 3,10,000Document Cost
₹ 15,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_HRY_282456_1Bid Award Id
ViewTender No
UWD/2023/D-978Tender Authority
Lala Lajpat Rai University Of Veterinary And Animal Sciences ViewPurchaser Address
-Website
http://https://haryana.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
CONSTRUCTION OF BOUNDARY WALL ALONG WITH SECURITY GUARD ROOMS FOR HARYANA PASHU VIGYAN KENDRA AT VILLAGE BEHAL, DISTRICT BHIWANI FOR LUVAS, HISAR
BOQ Items
... More
6.1.6 1 : 4 : 8 ( 1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
185.19
452301
2442.36
... More
HSR-21
6.14.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level. 1 : 1.5 : 3 (1 cement : 1.5 coarse sand (zone-III): 3 cum graded stone aggregate 20 mm nominal size).
587.55
2569891
4373.91
... More
HSR-21
6.15.1 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 cum graded stone aggregate 20 mm nominal size).
53.01
316407
5968.81
... More
HSR-21
6.16 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size).
22.5
137533
6112.59
... More
HSR-21
6.30.1 Centering and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns, etc. for mass concrete.
417.89
65308
156.28
... More
6.30.2 Walls (any thickness) including attached pilasters,buttresses, plinth and string courses etc.
2195.04
619418
282.19
... More
6.30.5 Lintels, beams, plinth beams, girders, bressumers and cantilever.
277.34
82226
296.48
... More
6.30.6 Columns, Pillars, Piers, Abutments, Posts and Struts.
69.68
18232
261.65
... More
6.30.17 Cornices and mouldings
131.28
71277
542.94
... More
HSR-21
6.33.6 Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level
Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Thermo-Mechanically Treated bars of grade Fe-500D or more.
61733.65
3748467
60.72
... More
HSR-21
6.34.6 Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level.
Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Thermo-Mechanically Treated bars of grade Fe-500D or more.
8055.19
489111
60.72
... More
HSR-21
7.21.1 Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in:. Cement mortar 1:4 (1 cement: 4 coarse sand).
411.87
1520855
3692.56
... More
HSR-21
7.22.1 Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in:. Cement mortar 1:4 (1 cement: 4 coarse sand).
331.57
1285633
3877.41
... More
HSR-21
11.5.3 12 mm cement plaster of mix :
1 : 4 (1 cement: 4 fine sand)
1694.22
142213
83.94
... More
HSR-21
11.6.1 15 mm cement plaster on the rough side of single or half brick wall of mix : 1 : 4 (1 cement: 4 fine sand)
1398.84
142402
101.8
... More
HSR-21
11.58 Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete
3093.06
99442
32.15
... More
HSR-21
11.68.3 Applying priming coat:
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
180.93
3555
19.65
... More
HSR-21
11.78 Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
180.93
5656
31.26
... More
HSR-21
11.95.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 litre/1 O sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
3093.06
270674
87.51
... More
HSR-21
13.29.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2018.3
167620
83.05
... More
HSR-21
27.15 Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ retum wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1 V :20H towards drawing force. Complete as per drawing and MoRT&H Specifications 2706 & 2200.
510
117499
230.39
... More
HSR-21
27.17 Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and MoRT&H Specification 710.1.4. of IRC:78 and 2200.
668.67
1180510
1765.46
... More
N.S (DSR-21
16.53) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 4 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately).
861.49
221696
257.34
... More
HSR-21
4.14.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil
67.92
5641
83.05
... More
HSR-21
4.32 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
45.28
2103
46.44
... More
HSR-21
6.1.6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work
below plinth level and up to Floor IV level:
1 :4: 8 ( 1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
7.52
18367
2442.36
... More
HSR-21
6.13 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
22.02
6745
306.3
... More
HSR-21
6.14.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level. 1 : 1.5 : 3 (1 cement : 1.5 coarse sand (zone-III): 3 cum graded stone aggregate 20 mm nominal size).
15.45
67577
4373.91
... More
HSR-21
6.15.1 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement:
1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size)
5.35
31933
5968.81
... More
HSR-21
6.16 Reinforced cement concrete work in beams, suspended floors, cum roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
19.88
121518
6112.59
... More
HSR-21
6.30.1 Centering and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns, etc. for mass concrete.
90.52
14146
156.28
... More
6.30.3 Suspended floors, roofs, landings, balconies.
44.98
9359
208.07
... More
6.30.4 Shelves (Cast in situ).
2.04
455
223.25
... More
6.30.5 Lintels, beams, plinth beams, girders, bressumers and cantilever.
148.88
44140
296.48
... More
6.30.6 Columns, Pillars, Piers, Abutments, Posts and Struts.
65.04
17018
261.65
... More
6.30.13 Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.
30.24
13853
458.11
... More
HSR-21
6.33.6 Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level
Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
3309.51
200953
60.72
... More
HSR-21
6.34.6 Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level.
Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
6039.69
366730
60.72
... More
HSR-21
7.21.2 Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in:. Cement mortar 1:6 (1 cement: 6 coarse sand).
10.62
37508
3531.82
... More
HSR-21
7.22.2 Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in :
Cement mortar 1:6 (1 cement: 6 coarse sand)
9.73
38544
3961.35
... More
HSR-21
7.28.2 Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level.
Cement mortar 1 :4 ( 1 cement :4 coarse sand)
3.37
1643
487.58
... More
HSR-21
8.26.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm
Granite of any colour and shade.
(Note:- Colour/Shade to be approved by the University)
0.51
1403
2750.44
... More
8.26.2.2 Area of slab over 0.50 sqm
5.18
14381
2776.34
... More
HSR-21
9.10.1 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete With residual type petroleum bitumen of grade VG -10
53.61
4979
92.87
... More
HSR-21
9.11.1 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1: 1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1: 3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat:
With common burnt clay non-modular brick tile of class designation 10
53.61
26187
488.47
... More
HSR-21
9.17.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design :
In 75x75 mm deep chase
56.69
6328
111.63
... More
HSR-21
9.61 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.
4
325
81.26
... More
HSR-21
10.37.1 Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) :
25 mm thick
36.85
29123
790.31
... More
HSR-21
10.38 Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
8.91
7447
835.85
... More
HSR-21
10.42 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
28.35
2253
79.48
... More
HSR-21
10.58 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :
15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
12.92
6957
538.48
... More
HSR-21
10.60 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
2.57
1760
684.93
... More
HSR-21
11.4.2 10 mm thick cement plaster
1 :3 (1 cement: 3 fine sand)
44.98
3856
85.73
... More
HSR-21
11.5.4 12 mm cement plaster of mix :
1 :6 (1 cement: 6 fine sand)
192.25
13048
67.87
... More
HSR-21
11.6.2 15 mm cement plaster on the rough side of single or half brick wall of mix : 1 :6 (1 cement: 6 fine sand)
37.92
3251
85.73
... More
HSR-21
11.58 Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete
275.15
8846
32.15
... More
HSR-21
11.64.1 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:
New work (two or more coats) over and including water thinnable priming coat with cement primer
93.33
4167
44.65
... More
HSR-21
11.68.3 Applying priming coat:
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
27.18
534
19.65
... More
HSR-21
11.78 Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
27.18
850
31.26
... More
HSR-21
11.95.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 litre/1 O sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
179.48
15706
87.51
... More
HSR-21
12.12.2 Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
(Note:- Colour/Shade and company to be approved by the University)
1.0 mm thick
18.13
8338
459.9
... More
HSR-21
12.37.1 Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws
6.17
8639
1400.22
... More
12.37.3 25 mm thick (for cupboard) including ISi marked nickel plated bright finished M.S. piano hinges with necessary screws
2.59
3409
1316.28
... More
HSR-21
12.89 Providing and fixing aluminimum extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS: 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
3
2103
701.01
... More
HSR-21
12.98.2 Providing and fixing aluminimum sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
250 x 16 mm
4
714
178.6
... More
HSR-21
12.99.3 Providing and fixing aluminimum tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete.
200 x 10 mm
4
289
72.33
... More
12.99.4 150 x 10 mm
4
246
61.62
... More
HSR-21
12.102.1 Providing and fixing aluminimum handles, ISI marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.
125 mm
8
393
49.12
... More
HSR-21
12.103.2 Providing and fixing aluminimum hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
Twin rubber stopper
3
155
51.79
... More
HSR-21
12.130.1 Providing and fixing of casement and fixed windows made from multi chambered UPVC profiles of 56 to 68mm width in natural from stabilized for heat, light, impact & UV radiation The UPVC profiles should be reinforced with galvanized steel profiles of designed thickness. All openable sashes shall be having weather seal fitted in continuous lengths made from Bubble EPOM Rubber and side hung/ top hung with up to 90 degree opening friction stays of SS 304 with provision of multipoint locking system made from Espag rods. All handle shall be made from Die Cast Zinc alloy (Model ESPAG)BS-1004A in white finish with suitable locking arrangement. The windows shall be fixed to opening using expandable screws and friction stays that shall be able to with stand wind speeds up to 180 km/hr. the shoot bolts in windows shall be rust proof metallic coated steel. The window frames shall be fixed in masonry wall RCC with necessary fasteners, nuts, bolts, washers, caps, silicon sealant etc. complete
Frame work
6.42
20163
3140.68
... More
12.130.2 Openable shutter
4.69
22507
4798.98
... More
HSR-21
12.159.3 Providing and fixing glazing in aluminimum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminimum snap beading shall be paid in basic item):
With float glass panes of 6 mm thickness (weight not less than 15 kg/sqm)
5.77
5621
974.26
... More
HSR-21
12.172.1 Filling the gap in between aluminimum/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600.
Up to 5 mm depth and 5 mm width.
16.92
1526
90.19
... More
HSR-21
13.3.1.1 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
Profile B.
Fixing with adjustable lugs with split end tail to each jamb.
17.21
5871
341.13
... More
13.3.2.1 Profile C.
Fixing with adjustable lugs with split end tail to each jamb.
7.09
2583
364.34
... More
HSR-21
13.29.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
636
52820
83.05
... More
HSR-21
4.16.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:
All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
10
616
61.62
... More
HSR-21
6.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level:
1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size)
0.5
1738
3475.56
... More
HSR-21
8.28 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platfonn, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
1
393
392.92
... More
HSR-21
9.57.2 Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
(i) Single socketed pipes.
110 mm dia PVC pipe
6
1200
200.03
... More
HSR-21
9.58.2.1 Providing and fixing on wall face Unplasticised - PVC moulded fittings/accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Single push fit Coupler
75 mm
1
49
49.12
... More
9.58.2.2 110 mm
2
148
74.12
... More
9.58.4.1 Single tee without door
75 x 75 x 75 mm
1
89
89.3
... More
9.58.4.2 110 x 110 x 110 mm
2
286
142.88
... More
9.58.5.1 Bend 87.5°
75 mm bend
2
118
58.94
... More
9.58.5.2 110 mm bend
3
279
92.87
... More
9.58.5.3 150 mm bend
10
1295
129.49
... More
9.58.6.1 Shoe (Plain)
75 mm Shoe
1
50
50.01
... More
9.58.6.2 110 mm Shoe
2
157
78.58
... More
HSR-21
10.100.2 Cement Concrete 1:8:16 with stone aggregate 40 mm size in cum foundation and plinth.
0.5
931
1862.8
... More
HSR-21
20.26.1 Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required.
11.43 cm thickness of walls
2
329
164.31
... More
22.86 cm thickness of walls
2
484
242
... More
HSR-21
20.36 Making connection with the existing G.I. branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site.
1
322
322.37
... More
HSR-21
20.49.1 Bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge.
Size of the main with which connection is to be made.
Up to 200 mm internal diametre.
2
1899
949.26
... More
HSR-21
21.84.1 Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I.inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping
1
3487
3487.17
... More
21.84.2 Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping)
1
4977
4976.69
... More
HSR-21
21.38.2 Lowering salt glazed stoneware pipes and specials into trenches for all depths and laying out the same to correct alignment gradient, level etc in trenches including all dressing and trimming of bed and sides of trenches, if required, trimming and cutting of concrete beds and joint holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching hunching and envelopes are completed. The sewer shall rest on the bed at every point throughout its length and to ensure this, it shall be grouted in without extra charge by the contractor with lime surkhi mortar, in the case of lime concrete beds and 1 :3 cement sand mortar in the case of cement concrete beds including cartage from Divisional Store or nearest Railway station to site of work.
The internal diameter of sewer being :-
150 mm internal diameter of sewer
10
380
37.95
... More
HSR-21
21.39.2 Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1 :1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications.
150 mm internal diameter of sewer
17
972
57.15
... More
HSR-21
21.40.2 Cutting glazed stoneware pipes and specials chipping and finishing the cut surface to a uniform finish and roughing the part of the pipes, if any entering the sockets of the adjacent pipes complete, to the satisfaction of the engineer-in-charge of the works.
150 mm internal diameter of Pipes
1
21
20.54
... More
HSR-21
21.94.2 Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge.
150mm internal diameter
10
1875
187.53
... More
HSR-21
22.14.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexibe Pipe
32mm dia
1
57
57.15
... More
HSR-21
22.20.2 Providing and fixing in position C.I. plain Nahani Trap conforming to I.S.I. specifications and of self cleaning design with C.P. brass hinged grating with frame complete.
With 75 mm internal diameter outlet
2
2340
1169.83
... More
HSR-21
22.23.1 Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
W.C. pan with ISi marked white solid plastic seat and lid.
1
3353
3353.22
... More
HSR-21
22.38 Providing and fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
1
241
241.11
... More
HSR-21
22.53.1 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
For 100 mm dia pipe
5
723
144.67
... More
22.53.2 For 75 mm dia pipe
5
705
141.09
... More
HSR-21
22.85.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
25 mm nominal outer dia Pipes
3
699
233.07
... More
HSR-21
22.86.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
20 mm nominal outer dia pipes.
12
3172
264.33
... More
HSR-21
22.91.4 Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.
External work.
32 mm dia nominal bore
20
5912
295.58
... More
HSR-21
22.98.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
20 mm internal diameter
1
384
383.99
... More
22.98.1 25 mm internal diameter
1
414
414.35
... More
22.98.3 32 mm internal diameter
1
485
484.9
... More
HSR-21
22.101.2.1 Providing and fixing Unplasticised PVC connection pipe with brass unions:
45 cm length
15 mm nominal bore
2
102
50.9
... More
HSR-21
22.104.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
15 mm nominal bore
1
346
345.59
... More
HSR-21
22.106.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
3
1372
457.22
... More
HSR-21
22.107.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore
1
508
508.12
... More
HSR-21
22.108.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.
15 mm nominal bore
2
888
443.82
... More
HSR-21
22.109 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
4
196
49.12
... More
HSR-21
22.113.2 Providing and fixing PTMT pillar cock of approved quality and colour.
15 mm nominal bore, 125 mm long foam flow, weighing not less 120gms.
1
167
166.99
... More
HSR-21
22.115.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms.
1
72
72.33
... More
HSR-21
22.117 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
1
127
126.81
... More
HSR-21
22.118 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
1
167
166.99
... More
HSR-21
22.166.2.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
With common burnt clay non-modular bricks of class designation 10.5
150 x 100 mm size P type
1
1489
1488.63
... More
HSR-21
22.171.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.
With common burnt clay non-modular bricks of class designation 10.5
1
11422
11422.36
... More
HSR-21
22.181 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
7140
7.14
... More
HSR-21
22.209 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
813
812.63
... More
HSR-21
22.221.8 Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Size 630mm x 500mm (above counter oval)
1
3985
3985.46
... More
HSR-21
22.222.2.2 Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type-B
110mm O/d SWR UPVC pipe lines laid complete.
13
4191
322.37
... More
22.222.2.3 90mm O/d SWR UPVC pipe lines laid complete.
13
3552
273.26
... More
HSR-21
30.88.1 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1 :2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1 :3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
For pipes 100 to 250 mm diameter
1
239
239.32
... More
HSR-21
20.71.1 Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge
48" (1200mm)
3
6162
2053.9
... More
HSR-21
20.72 Supplying, errection, testing of Exhaust fan (as per IS code 374) having a each capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge.
1
1339
1338.61
... More
HSR-21
23.4.1.2 COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT
Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.
Group B
42
24041
572.41
... More
HSR- 2021 23.4.3.2 Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control.
Group B
27
7547
279.51
... More
HSR- 2021 23.4.5.2 Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required.
Group B
12
13738
1144.83
... More
HSR- 2021 23.5.6.1 Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required.
1 run of Size 1.50 Sqmm(1/1.40mm)
For earthing/misc wiring
30
1581
52.69
... More
HSR- 2021 23.5.6.2 1 run of Size 2.50 Sqmm(1.1.80mm)
For Sub Main to SB with Plug+For Gate
60
4661
77.69
... More
HSR- 2021 23.5.6.4 1 run of Size 6 Sqmm(1/2.80mm)
For sub main to TPN DB's 4way (2x25=50)
50
6921
138.42
... More
HSR- 2021 23.8.1.5 Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.
Ceiling rose flush/surface type
3
54
17.86
... More
HSR- 2021 23.8.1.12 Bakelite angle/straight button holder large size.
6
273
45.54
... More
HSR- 2021 23.9 Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work.
1
109
108.95
... More
HSR- 2021 23.11 Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust side complete as required
1
381
381.31
... More
HSR- 2021 23.12 Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up each 287 to 450 mm sweep etc complete as required
1
256
256.29
... More
HSR- 2021 23.13 Supply, erection and fixing of 12 mm thick ply wood board having a circular sqft 141 /rectangular hole etc as required ncluding the cost of making hole, nuts and bolts, painting and other petty material with all labour etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work.
1
126
125.91
... More
HSR- 2021
23.22.4.5 Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work.
TPN DB Horizontal type Double Door 4 way ( 8 incoming and
3phase*4 outgoing)
3
8120
2706.68
... More
HSR- 2021 23.22.5.1 Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:-
6 amp. to 32 amp Single Pole.(4x9=36)
36
5208
144.67
... More
HSR- 2021 23.22.5.4 40 amp to 63 amp. Double pole
3
2031
676.89
... More
HSR- 2021 23.22.6.6 Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work.
FP RCCB 30ma sensitivity, 63 A
3
6732
2244.11
... More
HSR- 2021 23.7.6.1 Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work.
PVC pipe of 20 mm dia.
150
3885
25.9
... More
HSR- 2021 23.7.6.2 PVC pipe of 25 mm dia.
150
4823
32.15
... More
HSR- 2021 23.7.6.3 PVC pipe of 32 mm dia.
15
670
44.65
... More
HSR- 2021 23.8.10.1 Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects.
telephone sockets) 1 & 2 Modules including combined plate for Telephone and data (for
3
279
92.87
... More
HSR- 2021 23.8.10.2 3 Modules( for AC Sockets)
3
380
126.81
... More
HSR- 2021 23.8.10.3 4 Modules(for Toilet SB)
3
421
140.2
... More
HSR- 2021 23.8.10.4 6 Modules ( for LP+PP))
12
2229
185.74
... More
HSR- 2021 23.8.10.5 8 Modules ( for room SB)
3
699
233.07
... More
HSR- 2021 23.8.10.6 12 Modules( for Misc SB's)
3
847
282.19
... More
HSR- 2021 23.8.11.1 Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect.
5 amp 1 way switch(for plug on SB 6+ LP 12= 18)
18
739
41.08
... More
HSR- 2021 23.8.11.3 15 amp 1 way switch(PP 12)
12
986
82.16
... More
HSR- 2021 23.8.11.4 5 amp Socket(for plug on SB 6+ LP 12= 18)
18
1479
82.16
... More
HSR- 2021 23.8.11.5 15 amp 6 pin Socket(PP 12)
12
1490
124.13
... More
HSR- 2021 23.8.11.6 Bell Push
3
230
76.8
... More
HSR- 2021 23.8.11.7 step type Fan Regulator 2 modules 300 watt
3
772
257.18
... More
HSR- 2021 23.8.11.10 Blanking plate
30
536
17.86
... More
HSR- 2021 24.1.3 Earthing & Area Lighting
Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
2
6737
3368.4
... More
HSR- 2021 24.1.5 Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode.
2
1602
801.02
... More
HSR- 2021 24.1.8 Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.
50
4822
96.44
... More
HSR- 2021 24.1.13 Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.
20
429
21.43
... More
HSR- 2021 24.4.3 Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections.
6
3070
511.69
... More
HSR- 2021
24.4.5 Supply and erection of Single Phase weather proof M.S. box of size 20 cm x15 cm x 10 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A Bakelite connector, 1 no. 6 amp SP MCB and 1 Nos. 16 amp. neutral links fixed on Bakelite sheet in the M.S. box including painting and necessary connections.
2
1143
571.52
... More
NS-1 SITC 20W LED 1200mm Batten Light. The Endura Fixture is a surface & wall mounted LED batten with extruded aluminimum housing and robust construction . PF.95, System Wattage LED20W with minimum 1500 lumens in 5700k. The Fixture should be of Makes :-PHILIPS(BN170C LED 20S 6500PSU L120)/BAJAJ (BCLAB20W LED P)/HAVELLS : LUMILINE SMART 20W LED 865 LED WH/CGL/GE/OSRAM/WIPRO
3
2270
756.82
... More
NS-2 SITC 40W LED 1200mm Batten Light. The Endura Fixture is a surface & wall mounted LED batten with extruded aluminimum housing and robust construction . PF.95, System Wattage LED 40W with minimum 1500 lumens in 5700k. The Fixture should be of Makes :-PHILIPS(BN170C LED 40S 6500PSU L120)/BAJAJ (BCLAB40W LED P)/HAVELLS : DURABS40W LED840SPCSS/CGL/GE/OSRAM/WIPRO
3
2942
980.56
... More
NS-3 SITC Surface Mounted Bracket/wall light. The Fixture should be Made of chrome&metal Housing.PF.95, System Wattage 17/20W with minimum 1500 lumens in 5700k. The Fixture should be of Makes :--PHILIPS DECORATIVE : MODEL 48027/34302/34303 / BAJAJ /HAVELLS/GE/OSRAM/CGL /WIPRO
6
6555
1092.43
... More
NS-4 SITC 45W LED Street Light. The Fixture should be Made of pressure diecast housing with TOUGHNED GLASS diffuser and indivisual LEDs with secondary optics with IP 66 protection. PF.95, System Wattage LED 45W with minimum 1500 lumens in 5700k. The Fixture should be of Makes :-BAJAJ (ENXTP54LWHCRPCSD) /PHILIPS BRP052 LED 045 CW SL MR FG S1 PSU GR) /HAVELLS ( ENDURASUNDOWNSL45LED765PASYBOPC /CGL /GE/OSRAM/WIPRO
6
26986
4497.68
... More
NS-5 SITC of 15W LED Surface mounted round/square type downlighter. The Fixture should be Made of Extruded Aluminimum Housing. Inbuilt Protection of 2kv, PF.95, System Wattage 15W integral housing for driver. minimum 100 lumens/W in 5700k. The Fixture should be of Makes: BAJAJ(BPSLR SURFACE 15W LED WH SQ/RD SD)/ PHILIPS-SM251C LED16S 6500 PSU WH/HAVELLS ( EDGE SURFACE RD/SQ DLR 15W LED 840S / CGL/ OSRAM/GE/WIPRO
27
24461
905.98
... More
NS-6 SITC Surface Mounted Mirror light/Picture Light. The Fixture should be Made of chrome&metal Housing.PF.95, System Wattage 6/12/15W with minimum 1500 lumens in 5700k. The Fixture should be of Makes :-PHILIPS: MODEL 30973/31440/31441 / BAJAJ /GE/OSRAM/CGL /WIPRO
3
6186
2061.97
... More
NS-7 SITC 40W LED post top gate light. The Fixture should be Made of pressure diecast housing with TOUGHNED GLASS diffuser and indivisual LEDs with secondary optics with IP 65 protection. PF.95, System Wattage LED 40W with minimum 1500 lumens in 4000k. The Fixture should be of Makes :-BAJAJ BGCT W4 LED WW 40W LED/PHILIPS BGP300 LED28 757 PSU PC IN S1/HAVELLS RUBYPT40WLED757PSYMTOPC /GE/OSRAM/WIPRO
2
15016
7508
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements