Kurukshetra University Tender

100 mm dia ( 5.40mm thickness)

s

Providing & fixing of butterfly valve suitable for pressure more than 15 Kg/Sqcm. with flanges, nut bolts & gaskets and SS disc 316 grade etc all complete . (Make:-ADVANCE,CASTLE, KIRLOSKAR.) 50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing & fixing cast iron Slim seal dual type non-return valves (PN1.6) complete with matching flanges, rubber insertion, nuts, bolts and washer complete as required.etc. of following sizes. (Make:-ADVANCE,CASTLE, KIRLOSKAR.) 100 mm dia

Supply, Installation, Testing & Commissioning of Single headed, S.S. ISI marked oblique pattern hydrant landing valve with 80 mm dia flange inlet and 63 mm dia instantaneous type female out let complete with gunmetal cap and G.I chain twist release type plug and all accessories as per IS:5290-1983Make:-(NEWAGE,VICTOR, MINIMAX, SAFEX.)

Providing & fixing swinging type First Aid hose reel in red colour with 36 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia globe valve stop cock, terminating with G.M. coupling & nozzle of 5mm outlet with shut off valve confirming to IS 8090 - 1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required. (Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.)

Providing & fixing non-percolating flexible hose (RRL type – B) ISI marked (IS:636 Type B) 63 mm dia x 15 m long complete with ISI marked Male and female coupling (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 Sq.mm.copper wire.brusting pressure not less than 22 Kg/Sqcm. (two nos. for each hydrant-valve). (Make:-NEWAGE,VICTOR, CRC.)

Providing & Fixing Gun-metal 63 mm dia short size branch pipes with 20 mm dia nozzle with 63 mm instantaneous coupling ISI marked (IS:903)(Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.)

Providing and fixing standard firemans axe with heavy rubber handle complete. (Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.)

Providing and fixing inlet breaching having C.I. body Two way gun metal 63 mm dia instantaneous inlets conforming to IS 903 fitted with non return valves, 25 mm dia gun metal drain cock, blank cap, brass chains and 150 mm dia flanges with all accessories suitable for local fire tender complete as required. (Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.)

Providing and fixing 4mm thick glass door of size 2.1m x 0.9m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitable marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour.

Supply & erection of double leaf Solid fire rated Steel doors (Make Ozone or equivalent) are made up of 1mm thick G.I. sheet of size 1500mm width & 2400mm in height , BS-476 part 20-22 (1987) IS 3614 Part-2 1992 Door Leaf 45(± 1)mm thick , and Door frame of 1.5mm thick G.I. Sheet, with Rockwool (Density 96Kg/m³) as infill material with Polyester Powder coating of 60 to 80 microns (Max lamb of frame will be 100x55mm and Frame Consturction will be single Rebate). All Door shall be factory prepared and with necessary reinforcement hor Hinges, Lock, Door closer and all the eages interlocked complete with SS 304 Ozone ball bearing Hinges OZ-BHF-2BB 4x3x3 (8No.), Door Closer-NSK 680(1No.), Panic Bar (OZ-PB-CRR-F-900MM SILVER)(1 No.) Trim Lock (OZ-PB-CRTRIM-F-STD SILVAR) (1No.), Fire Rated clear glass 200x300mm Glass (1 No.), Flush Bolt (1 No.) & Anchor Fasteners Hilti/Fischer Make (8 No.) The work should be completed in all respect up to the entire satisfaction of the Engineer –in-Charge of the work.

Providing and fixing weather proof cabinet of size not less than 0.9 x 0.6 x 0.5 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in red colour suitable to accomodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be mounted on boundary wall complete as required.

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer's specifications. Water CO2 stored gas pressure type - 4.5 Kg capacity (IS:15683).

Mechanical Foam stored gas pressure type. 9 Ltr. capacity (IS:15683).

ABC type stored pressure type 6 kg capacity (IS:15683).90% MAP with (Mono Amonium Phosphate) pressurized with dry Nitrogen. (Make:-CEASE FIRE,VICTOR, MINIMAX,SAFEX.)

Providing and fixing signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+ -10%) containing lumigen II as base chemical, covered under UV stablized coating and of appropriate size (Glo-lite or eq. Make) including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats anchor fasteners etc. complete in all respacts as diercted by Engineer-in-charge

Supply, Fixing, Testing & Commissioning of fire authority approved electrical motor driven fire pump, suitable for automatic operation consisting of following : (DOWN COMER PUMP). (MAKE : Kirloskar/Mather + Platt) (a) Horizontally mounted, end suction type, Centrifugal fire pump with operating speed of 2900 rpm, as per IS:1520 complete for delivery of under mentioned discharge against desired mentioned head so as to ensure a minimum pressure of 35 meter at the highest and farthest outlet at the specified flow complete with necessary strainers , 100 mm dia dial pressure gauge of calibration 0-15 kg/sq cm including bypass arrangement for periodic testing of the working of the pumpset as well as testing of automation with required length and size of MS pipe and control valves for proper completion of work. The pump shall be capable of giving 150% of rated discharge at head not less than 65% of rated head. The pump shall be provided with Mechanical seals. The impeller shall be enclosed type and accurately balanced dynamically. The pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. (b) Squirrel cage, TEFC induction motor as per IS : 325, suitable for 415 V +/- 10%, 3 Phase, synchronous speed 2900 rpm, IP 55 protection and class 'F' insulation, vaccume impregnated windings with heat and moisture resisting varnish for the above pump and flexible coupling with the pump. The motor shall be rated for continuous duty and shall have HP rating necessary to drive the pump at 150% of it's rated discharge at 65% of rated head. (c) Common bed plate of fabricated mild steel channel or cast iron type, coupling, coupling guard ets as required. (d) Suitable cement concrete pump foundation and vibration clamping arrangement as required. with foundation bolts, anti vibration pads, washers etc. (e) Pressure switchs (for both upper and lower levels) for automatic operation of motor including necessary wiring upto control panel. Discharge : 900 liter per minute Head : 35 meter

Design, manufacture, supply, storing, inspection, handling, assembling, installation in correct alignment, position, affecting proper connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical type Electrical Control Panel for fire fighting pump, floor mounting, dust & vwrmin proof, front operated construction, enclosure class - IP 52, powder coated after proper treatment with 7 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable required. Cost shall include cable / wiring from each pump to electrical panel, cable trays, earthing for all pumps. All MCCB's shall be motor protection category, current limiting & electronic release type. All MCCB's shall be Ics = 100% Icu, with rotary handle. All TP MCCB shall be with heavy duty solid isolable neutral link. The panel shall be provided with suitable relays including contactors, star-delta / DOL starters for all pumps as applicable, 1 no. phase indicating lamp, ammeter, voltmeter, selector switches, CT's, PT's, protective fuses, indicating lights for incoming and outgoing feeders, 1 Set of indication lamps for mains ON/OFF/Trip conditions, auxillary switches, dry suction cut off, single phase preventer etc. The under voltage release and no volt coil shall not be provided in the MCCB's. Provisions shall be made for providing potential free contacts to all pump starters for connection to building automation system / Fire alarm control panel. The rates shall include necessary interconnecting armoured copper control cables of suitable sizes within the panel and from panel to various motors and engines, pressure switches, level switches of water tanks, cable trays etc required to complete the entire installation upto the satisfaction of engg-in-charge. The fault withstanding capacity of panel shall be 35 KA rms for 1 sec. Following Fire fighting pump shall have to be controlled - 1 set of electric motor driven down comer pump (Switchgears Make : ABB / L&T / Siemens / Schneider) Incomer : MCCB with flush mounting square CT operated ammeter with selector switch, Voltmeter with selector switch, protective fuses and phase indicating lamps. Bus Bar : TPN, 415 volt, 3 phase, 4 wire, 50 HZ electrolitic high conductivity Copper with SMC / DMC supports, with colour coading and insulated by heat shrinkable sleeves and clips on shrouds for joints. The current density of copper bus bar shall not exceed 1.25 amp/sqmm. Outgoing : 1 no. 63 AMP each TP MCCB with star delta starter of suitable HP for down comer pump with over load protection, single phase preventor complete for automatic operation, selector switch for local/remote, auto/manual/off operation, with CT operated ammeter with selector switch and indication lamps for "On" "Off" and "Trip" mounted on the cubicle door. 1 no. 63 AMP FP MCB as spare Control panel as described above MAKE:- ABB/L&T/HAVELLS.

Providing, fixing, testing and commissioning of pressure vessel (450 mm dia & 1800 mm height) for pressurization of fire system complete with pressure switches with isolation valves, pressure gauge with isolation valve, valves at outlet / drain to operate as per operating sequences including 80 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required.

PVC 25mm² 4 core Aluminum Cable (Armoured) Make:- Havells/Plaza

Providing,fixing, testing and commissioning of Conventional fire alarm control and indicating panel,microprocessor based with RS 485 communication, pulser, timer for dual stage alarm facility complete with indicators, floor selector switches, stand by SMF lead acid battery (suitable for 48 hours normaloperation & after that min. 30 minutes for full load operation),battery charger,battery box,connections to building automation system/ Firefighting pump panel etc. as required, complete in all respect as per specifications and requirements.The panel shall have facility of automatic dialling to 5 telephone numbers in case of alarm. The main control panel should give a distinct visual signal of the isolation of zone from the local indication panel. If all the zones at the local panel are isolated or if the fuse of the LCP gets blown, it should result in an open circuit fault indication at the Main Panel. Each zone should have provision of activation of hooter.The Panel shall be provided with suitable Nos. No./NC Potential free contacts for control modules as per site rquirement and as per quantity specified above.(4 Zone Panel)

Providing, fixing, testing and commissioning of resettable type manual call points as per specifications.The manual call point should have an indicator, which should "blink" in stand by condition. Make:- Agni Alram, Agni.

Providing, fixing, testing and commissioning of electronic hooters housed in sheet steel / Polymer housing suitable for wall /ceiling and surface / recess mounting including making connectionswith wires complete in all respects and as per specifications.Make:- Agni Alram, Agni.

Supplying, erection, testing and commissioning of following pair sq.mm FRLS copper conductor flexible cable in conduit with terminations etc. as required.( 2X1.5 sqmm).Make:- Havells, Plaza, RR.

The contractor /Agency will submit a " System in working condition" certificate from local fire authority after completion of work at their own cost.