Kurukshetra University Tender

Laying of underground cable 0.75 meter below ground level covered with sand and brick including excavation and refilling of trenches 24.2.2 50 Sq mm 2 to 4 Core

185 Sq mm 240 sq mm 3 to 3

Laying of underground cable 0.75 meter below ground level covered without sand and bricks including excavation and riffilling of trenches. 50Sq mm to 150 sqmm 2 to 4 Core

185 sq mmto 240 sq mm 3 to 3

Laying and erection of XLPE II or 33kv HT aluminium conducter armoured cable ISI mark laid on surface/pipe/cable tray with all labour and material as required 24.3.2.1 up to 120sqmm 3 core XLPE cable

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core XLPE aluminium conductor cable of 11 KV grade as required 24.3.4.1 70to 120 sqmm

Erection of RCC/PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required .24.4.10.4 Above 8.0 meter and up to 11.0 meter

Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. 23.22.1.5 TRIPLE POLE MCCB 200 to 250 Amp, 25KA

TRIPLE POLE MCCB 400 Amp, 50 KA

TRIPLE POLE MCCB 600to 800 Amp, 50 KA

Design, Supply & erection of transformer of standard make Required 11/0.433 KVA rating outdoor type 11KVA, G.O. Switch,H.Pole,battery charges,earthling safety equipment,fenced enclosure for transformer,and any other contingent there to complete in all respect as per approved make and direction of engineer-in-charge as per respective capacity.Make:- Kirloskar/Cormption/Bharat Bijali/Amosons/Jay-bee/Alsttom/NGEF 20.76.10 300KVA

Supply and erection of High Tension Voltage caution notice plate of size 250x200 mm in three language

Supply of 50mmx3mm core HT XLPE armoured cabel installed on pole complete up to the entire satisfaction of engineer-in-charge Make:-Havells/polycab/KEI.

S/E saty wire complete with anchor rod henly type complete with 11KV Disc.Insulater and stay wire of required lengh including the cost of all material i.e. nut bolts,clamps etc.required to complete the job in all respect upto entire satisfaction of engineer-in-charge.

Supply and erection M.S.Channel/angle iron including clamp and nut bolts etc. complete in all respect

Supply and erection of 6 SWG ACSR conductor on exiting pole including binding the same on pole with insulator and cable as complete as per entire satisfaction of Engineer-in-charge

Provinding and fixing of suspension hook complete with base for erection of HTXLP cable size 50mmx3 core on existing PCC pole complete as per entire satisfaction of Engineer-in-charge

Supply and erection of PVC pipe of 6 kg.pressure size 80mm dai laid 1 meter below ground level complete including digging refilling refilling of the trench with jointing etc. complete upto the entire satisfaction of Engineer-in-charge of work.

Supply of 240mm 3.5 core armourd cable of Make: Havells/Polycab/K.E.I

.Supply of 120mm3.5 core armourd cable of Make:Havells/Polycab/K.E.I

Supply of PCC Pole as per IS:1678-1960 9 Mtr. Long 105mmx115mm at top and 105mm X 315mm at bottom with working load of 200kg of good quality as per UHBVN Specifictions.

Supply & erection of L.T. out door type LT Panel fabricated with 14 gauge CRCA sheet with Powder coating sheet steel pedestal floor mounting type mounted on M.S. Channel 75 x 40 x 6 mm totally enclosed dust and vermin proof front opening cubical type consisting of copper wiring and bus bar of required capacity covered with heat shrinkable sleeves in different colour 415 volt 50 Hz A.C. supply with allied item for connection comprising of the following: - (A) Main Incomer :- (i) Space for MCCB 600 Amp. 415 V T.P. three phase 50 K.A. breaking capacity with rotary handle (include the cost of the rotary handle) = 01 No. Make of MCCB /L&T/ABB. (ii) RYB three phase indicator lamp = 03 No. (iii) Digital Ampere meter 0-500 amp and Digital Voltmeter 0-500V= 01 Set (B) Outgoing :- (i) Space for MCCB 400A 415 V TP three phase 35KA breaking capacity with rotary handle = 02 Nos. Make of MCCB /L&T/ABB (ii) Space for MCCB 250A 415 V TP three phase 35KA breaking capacity with rotary handle = 01 Nos. Make of MCCB /L&T/ABB (iii) Space for MCCB 200A 415 V TP three phase 10KA breaking capacity with rotary handle = 01 Nos. Make of MCCB /L&T/ABB The panel should be nicely powder coated after degreasing phosphate treatment. The panel should be marked with incoming and outgoing feeder. The job includes interconnection (duly tape) with Aluminum bus bars of required cross-section capable of taking full load current between each MCCB and bus bar. The cubical panel should have removable glands plates for incoming and outgoing cables. The bus Should be supported on epoxy insulator of suitable length confirming to relevant Indian standard. The Job should be completed up to the entire satisfaction of the Engineer in- charge of the work.barsolid