Karnal Smart City Limited Tender

Providing & Fixing TOILET CUBICLE - Toilet Cubicle Made Of Heat, Bacteria, Water Chemical, Scratch, Impact & Anti Bacterial Resistant 12Mm Thick ,Solid Compact Laminate Panels Included Doors, Pilasters & Intermediate Panels.Toilet cubicle I Shape (Front Partition) with standard ,dimension of Upto1950mm height x 1200mm width x 1500mm ,depth which includes 550-600mm door size width.Doors 1,Vertical Pilaster 2,U / Door Channels & Top Rail :- SS 304 Grade as per plan,Foot Assembly :- Shoe Box SS 316 Grade 16,Door lock with indicator SS 304 Grade 8,Door Knob SS 304 Grade 8,Self Closing Gravity Hinges SS 304 Grade 24,Coat Hook SS 304 Grade 8,Screws SS 304 Grade as per plan.all work done as per directed by engineer in charge.

Supply, Installation, testing and commissioning of Climbing wall DEMENSIONS OF THE LEAD CLIMBING WALL HEIGHT - 15MTR. WIDTH - 06 MTR. NO OF FACES - 1 NO. OF CLIMBERS - 03 TOTAL CLIMBING SURFACE - 90 SQ MTR. AAPPROX POLYSTER RESIN FIBER GLASS PANELS ARE 08MM THICKNESS ,SECURITY SYSTEM - AS PER BS EN 12572-1:2017 STANDARDS, IMPORTED FIX ANCHORS & SECURITY SYSTEM ALL NUTS & BOLTS TO BE STAINLESS STEEL , IMPORTED HOLDS - 300 NOS. OF ALL KINDS USED IN CLIMB ,CLIMBING VOLUMES - 50 NOS. OF ALL SIZES ,MACRO CHIPS - 50 NOS. MACRO CHIPS ,PROVISION TO FIX THE TOP ANCHOR BY LADDER. DEMENSIONS OF THE SPEED CLIMBING WALL ,HEIGHT - 15MTR. WIDTH - 6MTR. NO OF FACES - 1 NO. OF CLIMBERS - 02 TOTAL CLIMBING SURFACE - 93 SQ MTR. POLYSTER RESIN FIBER GLASS PANELS WITH 16MM THICKNESS ,SECURITY SYSTEM - AS PER BS EN 12572-1:2017 STANDARDS, IMPORTED FIX ANCHORS & SECURITY SYSTEM ALL NUTS & BOLTS TO BE STAINLESS STEEL , HOLDS - TWO SET OF SPEED HOLDS (40 HAND HOLDS & 22 HAND HOLDS) ,AUTO BELAY DEVICE - ONE PAIR OF IFSC CERTIFIED AUTO BELAY SYSTEM , TIMER - ONE PAIR OF IFSC CERTIFIED SPEED TIMER ,PROVISION TO FIX THE TOP ANCHOR BY LADDER.DEMENSIONS OF THE BOULDERING CLIMBING WALL  HEIGHT - 4.5MTR.  WIDTH - 15MTR.  STAGE - BOULDERING WALL WILL START ONE MTR. FROM GROUND LEVEL  NO. OF CLIMBERS - 5  TOTAL CLIMBING SURFACE - 80 SQ MTR. POLYSTER RESIN FIBER GLASS PANELS ARE TO 16MM THICKNESS  SECURITY SYSTEM - AS PER BS EN 12572-1:2007 STANDARDS, IMPORTED FIX ANCHORS & SECURITY SYSTEM ALL NUTS & BOLTS TO BE ZINC PLATED  HOLDS - 200 NOS. OF ALL KINDS USED IN CLIMB. 100 NOS. OF VOLUMES  MACRO CHIPS - 50 NOS. MACRO CHIPS  GROUND ARANGEMENT FOR LANDING AREA WITH UIAA CERTIFIED CRASHPADS DEMENSIONS OF THE BEGINNERS/TRAINING CLIMBING WALL  HEIGHT - 8MTR. WIDTH - 3 MTR.  NO OF FACES - 1  NO. OF CLIMBERS - 02  TOTAL CLIMBING SURFACE - 24 SQ MTR. POLYSTER RESIN FIBER GLASS PANELS ARE 08MM THICKNESS  OVER HANG - 01MTR. AT THE TOP SECTION OF BEGINNER’S WALL  SECURITY SYSTEM - AS PER BS EN 12572-1:2017 STANDARDS, IMPORTED FIX ANCHORS & SECURITY SYSTEM ALL NUTS & BOLTS TO BE STAINLESS STEEL CLIMBING HOLDS - 200 NOS. OF ALL KINDS USED IN CLIMB  PROVISION TO FIX THE TOP ANCHOR BY LADDER.  RAIN SHED - RAIN SHED ON ROOF WITH GI SHEET.DESIGN & ENGEERING SERVICE (STRUCTURAL ENGEENERING, CLIMBING WALL DESIGN),CIVIL & FOUNDATION RCC WORK ,CLIMBING SURFACE OF POLYSTER RESIN FIBRE GLASS PANELS FOR SIDE OF CLIMBING PANELS,FABRICATION OF STEEL FRAME,700 CLIMBING HOLDS WITH L BOLTS FOR LEAD, BOULDERING & WARM UP ,150 VOLUMES FOR CLIMBING,100 MACRO CHIPS FOR CLIMBING,TWO SET OF IFSC SPEED CLIMBING HOLDS,TWO SET OF IFSC AUTO BELAY DEVICE,TWO SET OF IFSC SPEED CLIMBING TIMER,TOP ANCHORS & HANGERS, 100 SQ. MTR. CRASHPAD FOR BOULDERING (400MM),300 SQ. MTR. APPROX. ROOF SHED FOR ALL CLIMBING WALLS WITH GI SHEET,TECHNICAL EQUIPMENT EXCEPT MITTENS:4 NOS. 50MTR IMPORTED DYNAMIC ROPE ,30 NOS. IMPORTED PADDED SEAT HARNESS,4 NOS. IMPORTED DESCENDER,3 NOS. IMPORTED GRI-GRI,20 NOS. IMPORTED SCREW CARABINER,30 NOS. IMPORTED QUICK DRAW,01 PAIR IMPORTED JUMAAR,2 PR. INDIAN MITTENS,5 HELMET,01 DRILL GUN WITH EXTRA BATTERIES4 ALLEN KEY & 4 SET OF BIT.All work done as directed by engineer in charge.

Supply and installation of Projector with Screen-96X72 PROJECTOR SCREEN WITH TRIPOD STAND:Specifications,Type:Spring action pull down,Supported Display Technology:1080,Mounting Type:Stand Mount and Wall Mount,Aspect Ratio:16:9,Display Fabric Material:MATT WHITE,Length x Width of Projector Screen (Inch x inch):96X72,Gain:1.6,Life time lubricated motor for smooth & silent functioning of the screen:NA,Anti UV Coating:Yes,Waterproof/Washable:Yes,Fire Proof:No, Standard Throw (0.91 to 2.5) Multimedia Projector (MMP) With 1920 x 1080 (Full HD) Resolution:Specification,Number of HDMI In Port:2,Analog RGB In Port (Hours):Yes,Video In:Yes,Storage Media Port:No,Number of USB Type A:1,Number of USB Type B:1,Technology:LCD,Projection Method:Front and Rear both,Native Resolution:1920 x 1080 (Full HD),Brightness (Lumens):3500,Contrast Ratio (Minimum) (pixels )( X :1 ):15000,Optical Zoom:Yes,If Yes, Optical Zoom (%):120,Availability of Lens:Yes,Remotely Controlled:Ye,If Yes, Type of Projector:Standard Throw (0.91 to 2.5),Aspect Ratio:0.6729167,Keystone Correction:Automatic & Manual Both,Type of Light Source:UHP / UHE / UHM,Minimum Life of Light Source (In Normal Mode) (Hours):6000,Lamp Hour Counter (In-Built):Yes,Inbuilt Speaker:Yes,If Yes, Wattage of Speaker:2,Power Consumption in Sleep Mode (Watts):1,Power Consumption in Normal Mode (Watt):327,Noise Level in Echo Mode (dB):28,Noise Level in Normal Mode (dB):37,Power Supply:210V-240V, 50 Hz,BIS Registration under CRS of Meity:Yes,BIS Registration Number:R-41005371,Dimensions (Length x Breadth x Height) (mm x mm x mm):303 x 252 x 93,Minimum Operating Temperature (Degree C):5,Maximum Operating Temperature (Degree C):35,Minimum Operating Humidity ( % RH):20,Maximum Operating Humidity ( % RH):80,

Supply of Laptop: Laptop Specification: Intel Core i5 - 11th generation with 4 core per processor (2.4 Ghz), processor nos: Intel Core i5 1135G7/H, Cache (MB): 8 MB, Expansion Slots (M Dot 2), Integrated graphics card: Iris Xe Graphics, operating system window 10 or higher, Memory: DDR 16GB, Ram speed 2666 Mhz, Total Numbers of DIMM Slots Available: 2, Number of DIMM Slots populated:1, RAM Expandability up to( using spare DIMM Slots in GB):64, Storage: Type of Drives used to populate the Internal Bays: SSD, Number of Internal Bays populated with SSD:1, Capacity of each SSD (GB): 512 GB or Higher, Wireless Connectivity: Wi-Fi 6: 802.11ax, Number of Ethernet Ports: 1 (10/100/1000 on board Integrated Gigabit Port), Bluetooth Connectivity: 5.1, Ports: Number of USB Version 3 point 0 / 3 point 1, Gen 1 Ports:2, Number of USB Type C Ports:1, Number of HDMI Ports:1, Number of Thunderbolt Port:1, Display: 14 inch non touch- LED HD Backlit Antiglare, Panel Technology: IPS, Display Resolution (Pixels): 1920x1080, Availability of Webcam integrated with Display: HD, Type of Keyboard: Standard, Backlit Keyboard: yes, Spill Resistant Keyboard: yes, Pointing Device/Touchpad: Touchpad with multi-touch gestures enabled, Hardware Trusted Platform Enabled: yes, Carry Case: yes, Security Lock Slot: yes, Battery Type: Integrated (Li-ion ): 42 watt (approx 8 hr backups) , BIS, BEE, ROHS: Compliance.

Supply of Tennis Ball Machine Bag: Bag weight - 15kg. Dimension: 35.56 x 45.72 x 86.36 cm. Launch speed varies from 10/45 mph to 16/73 kmh. Powerful Lithion Ion battery lasts up to 5 hours. 144 Ball Capacity. Easy on/off control for both the Slinger Bag and Slinger Oscillator with the convenient remote control.

Supply of Racket String Machine Automatic Gamma 8900 Els Tennis Stringing ,Machine, Electric.

Supply of Travel Ball Cart :The travel cart features a durable nylon ball bag that clips securely into the top of the cart wish is designed to rule on tennis courts and other smooth surfaces. Its capacity is upto 90 balls.

Supply of The Tennid Trainng aid for Ball hitting

Supply of Football scour Throwing Machine ,Power:200W, Ball Capicity:15 pcs ,Voltage: AC100-240V, Net Weight: 102KG, Interval :4.5-6.5S, Shooting Distrance 30M

Supply of Grass Cutting Machine SKU : AGR.RID.83016198,Type of Product : Rotary Lawn Mower,Power : 22 HP,Size (mm) : 1168 mm,Size (Inch) : 46 Inch.

Supply of Bola Hockey ball machine SPEED 30”90MPH,RUN ON 12V BATTERY AND AMINS,POWER LIGHT WEIGHT 33KG

Supply of Daedo PSS Gen 2 full kit 2 Chest guard with Transmitter 2 Chest Guard Transmitter 2 Head Guard with Transmitter 2 Head Guard Transmitter 1 Receiver 3 Judge Box Scoring System 2 Sensor Socks 4 Recharges Sensor Check Caard Daedo Gen2 Software Daedo Big /bag

Providing and fixing 100 LPH Water Cooler with inbuilt RO System (60 ltr PH),Structure NSF Approved Frame SS 304 steel,Pre Filter (Ist stage):-10 Micron Sediment—20",Carbon Filter-IIIRD stage:-GAC NSF with 20” Housing Kemflo(USA)1100 id value,Booster Pump IV th stage :-1.8 LPM1 No—Kemflo (USA) 48 volt,Transformer:-48 Volt 2 No—Delta with 36v additional output,Production Rate 60 LPH,Membrane (Vth Stage)1 No TFC 200 GPD Inline Post carbon 10 “ (VI th stage):-2 % Silver Impregnated Carbon(Kemflo / shurflo) - USA,Anti Scalant Dosing (VII th stage):-Balls with Sediment Filter USA Autom,ation Circuit CCK,Tubing:-Imported cck /Kemflo,Low Pressure Switch:-cck (USA),Float with micro switch:-cck (USA),Inlet Water assembly:-3 way with flow control,Fittings & Pipes :-All Push Fit with NRV facility,Solenoid Valve:-24 /36 Volt,Inlet Pressure Range 5/2.5 kg/cm2,Rejection of TDS 90 /95 %,Recovery 25/40 %,Operating Voltage 230 V AC.

Providing and installing in position -Pec Dec Fly,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint.

Providing and installing in position -Lat Pull Down With Rowing,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Leg Curl Leg Extension,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Hack Squat / Leg Press,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Cable Cross Over,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Olympic Incline Bench,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Olympic Decline Bench,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Olympic Flat Bench,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -ABS Board,Full Iron Cover Machine 4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Single Twister,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Preacher Bench,Full Iron Cover Machine4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Adjustable Bench,Full Iron Cover Machine 4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position -Simple BenchFull Iron Cover Machine 4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing & placing Utility tool, Full 4x2 Capsule Pipe ,12 Gauge Pipe,80kg MS Iron Weight,Powered Coating Paint

Providing and installing in position of Dumbbell Rack / Road Stand.

Providing & Placing Bouncer Dumbell 200 kg set

Providing and installing in position Olympic Plats (200 kg) set

Providing and installing in position ,Olympic Rods set

Providing & Placing 5 hp Treadmill,Power drive electricity:AC,Motor power:5 hp,Provision of brushless motor:Yes,Speed Range in mph:0.5 to 15,Incline range:0 to 15 %,Deline range:3 % or more,Warranty:1,Provision of USB Port:Yes,Connectivty to mobile/tablet:Yes,Material for frame:AL Alloy,Material for side foot rail:AL Alloy,Display size in Inch:8.

Providing and installing in position Spinning Bike ( Transformer with 24Kg Flywheel).

Providing and installing in position Commercial Spinning Elliptical with Metre&Sensor.

Main LT Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. 400A FP MCCB, 415 V, 50 Hz. : 2 Nos 400A 4P Contractor 415 V, 50Hz.: 2 Nos With Electro Mechanical Interlocking arrangment Indication & digital metering 400TP + N Aluminium sectionalised BUS suitable for 1.1 K V with a fault level with-stand: 20 KA for 1 second. The Earth Bus shall be of AL & run contInuously throughout the width of the panel. Outgoing : 125A, 4Pole, 50 Hz, MCB : 1 Nos. 63 A, 4Pole, 50 Hz, MCB : 6 Nos. 40 A, 4Pole, 50 Hz, MCB : 4 Nos. 20 A, DPPole, 50 Hz, MCB : 3 No. Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL

Main LT Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. 125A FP MCCB, 415 V, 50 Hz. : 2 Nos 125A 4P Contractor 415 V, 50Hz.: 2 Nos With Electro Mechanical Interlocking arrangment Indication & digital metering 125TP + N Aluminium sectionalised BUS suitable for 1.1 K V with a fault level with-stand: 20 KA for 1 second. The Earth Bus shall be of AL & run contInuously throughout the width of the panel. Outgoing :63 A, 4Pole, 50 Hz, MCB : 3 Nos. 40 A, 4Pole, 50 Hz, MCB : 2 Nos. 20 A, DPPole, 50 Hz, MCB : 3 No. Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL

Pathway Lighting Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. Incomer :40A TPN MCCB - 1 NOS ; Outgoing : 16A TPN MCCB - 3 NOS ; Indication lamps (RYB) with control MCB - 03 Sets with Timer and Contactor Danger notice plate Make : As listed in UHBVNL

VRV Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. Incomer :125A FP MCCB - 1 NOS ; Outgoing : 16A DOL / SOFT STARTERS -10 NOS ; Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL

Main LT Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. 250A FP MCCB, 415 V, 50 Hz. : 2 Nos 250A 4P Contractor 415 V, 50Hz.: 2 Nos With Electro Mechanical Interlocking arrangment Indication & digital metering 250TP + N Aluminium sectionalised BUS suitable for 1.1 K V with a fault level with-stand: 20 KA for 1 second. The Earth Bus shall be of AL & run contInuously throughout the width of the panel. Outgoing :63 A, 4Pole, 50 Hz, MCB : 4 Nos. 40 A, 4Pole, 50 Hz, MCB : 4 Nos. 20 A, DPPole, 50 Hz, MCB : 3 No. Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 3.5Cx50 sqmm AL Ar Cable

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 4C x 25sqmm Al Ar cable

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 4C x 16sqmm Al Ar cable

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)4C x 10sqmm Al Ar cable

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 4C x 6sqmm Al Ar cable

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 3C x 4sqmm Cu Flex cable

SITC of 40W LED Batten having Extruded aluminium housing fitted with Engg. Plastic end caps. With Opal diffuser.LED should be populated on FR4 PCB in which LED’s should be mounted & connection should be in series parallel.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)=110lumens/watt, Minimum system Lumens 4400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500K ±500K, CRI=80, PF=0.9,THD10%, and Operating Temperature Range-10 deg C to +50deg C, IP20. Built in Surge Protection of 4KV and an operating Voltage Range of 140 to 300V AC,50Hz.The driver should be constant current driver.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Bajaj Cat. Ref.BCLAB SP 44L LED CW PC SD or Equivalent.

SITC of recessed mounted LED 600x600mm fitting made of CRCA) sheet steel housing comprising of LED’s connected in series parallel,Opal diffuser fixed in separate white powder coated ,Opal diffuser frame is held in with housing by screws for easy maintenance. Fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt, ,Minimum system Lumens 3600 lm ±10%Life of fixture 50000hrs@L70 Lumen maintenance, CCT up to 5700K±300K, CRI minimum 80, PF ≥0.95, THD 10% and an operating Voltage Range of 140 to 277V AC. Minimum Internal Surge Protection 2.5 kV. The fixture should comply with the other parameters as per IS10322 and specifications. Bajaj Cat. Ref BZRSLL 36W LED WH i

Supply of LED recessed Downlighter with a nominal system lumen output of 1200 lumens ±10% and a minimum system efficacy of 100 lm/W. The luminaire should have a color temperature of 5700K and CRI80. The luminaire shall meet IP20 rating with THD10% and PF 0.95. Built-in Surge protection of 2 kV,Maintenance of lumen output 50000 hrs.The luminaire housing should made of pressure die cast aluminium with a high efficiency diffuser.Bajaj Cat. Ref BZSLOS nxt 12L LED WH SD

Supply of 40W LED industrial Weatherproof Batten having Extruded aluminium housing fitted with end caps. Luminaire should be Completely prewired with accessories up to terminal block and fixture should have minimum efficacy at System level (Not Chip Level)=120lumens/watt, Minimum system Lumens 4800 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500K ±500K, CRI=80, PF=0.9,THD10%, and Operating Temperature Range-10 deg C to +50deg C, IP65,IK07. Built in Surge Protection of 4KV and an operating Voltage Range of 140 to 300V AC,50Hz.The driver should be constant current driver. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Bajaj Cat. Ref.BIPC 40W XE TYPE or Equivalent.

Stage seating lighting : Supply and Installation of 80W LED flood light luminaire, LED luminaire having Epoxy powder coated pressure die‐cast aluminium housing,Weatherproof gaskets should be provided for LEDs and control gear compartments.Luinaire should be suitable for Side entry mounting for max. 38mm OD pipe bracket.The LED driver acces should be from top for easy maintenance.LEDs should be provided with non‐yellowing modular secondary lens optics.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)=120lumens/watt, Minimum system Lumens 9000 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 5665K ±355K, CRI=70, PF=0.9, THD10%, and Operating Temperature Range-5 deg C to +45deg C, IP66. Built in Surge Protection of 4KV & external surge protection of 10kVand an operating Voltage Range of 140 to 270V AC,50Hz.Luminaire Weight should not exceed 1.5kg.The driver used is specially designed to have built‐in surge voltage, open/short circuit protections.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. LUMINAIRE MAKE : Phillips / Bajaj / Surya /VAK Lighting. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM.

Tennis court Lighting : Supply and Installation of 320W LED flood light Olymipc type luminaire, LED luminaire having Epoxy powder coated pressure die‐cast aluminium housing,Weatherproof gaskets should be provided for LEDs and control gear compartments.Luinaire should be suitable for Side entry mounting for max. 38mm OD pipe bracket.The LED driver acces should be from top for easy maintenance.LEDs should be provided with non‐yellowing modular secondary lens optics.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)=120lumens/watt, Minimum system Lumens 38400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 5665K ±355K, CRI=70, PF=0.9, THD10%, and Operating Temperature Range-5 deg C to +45deg C, IP66. Built in Surge Protection of 4KV & external surge protection of 10kVand an operating Voltage Range of 140 to 270V AC,50Hz.Luminaire Weight should not exceed 1.5kg.The driver used is specially designed to have built‐in surge voltage, open/short circuit protections.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. LUMINAIRE MAKE : Phillips / Bajaj / Surya /VAK Lighting. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM.

SITC of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete.

Supply, installation, testing and commissioning of following minimum capacity High wall type (Split) Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operation on 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature. Including Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V+/-10%, 3Phase, 50HzAC power supply.

SITC of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation:B, 3 no's blades, 30 cm long down rod, 2 no's canopies, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete.

Supply installation of 20KVA UPS with 30mins battery back up with racks complete

Supply installation of EXHAUST FANS 300MM SWEEP

Supply, erection testing and commissoning of 8 person (540-560kg) electrically operated lift serving of 3 step call opening is same side, lift car and entrance shall be of stainless steel finish, automatic rescure device at a speed of 0.75 / 1.00 mps including all necessary equipment and power operated centre / side opening sliding door stainless - No.3 finish, Microprocessor based simplex selective collective control with I without attendent.(the floor identify buttons shall be tactile or braille control rovisions)

Supply 7 installation of GEYSER 9L .Make Bajaj,havells,Crompton & grieavs,V-guard.

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/ Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R410A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V+/-10%, 3Phase, 50HzAC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5

INDOOR UNIT-CASSETTE TYPESupply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeedmotor, coilsection with DX Coppercoil , electronic expansion valve, outer cabinet, drainpump, grill, necessary supports, vibration isolation, cordless remote controletc., suitable for operation on single phase 230V±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree CDB and 19Degree CWB temperature.1.6TR

INDOOR UNIT-DUCTABLE TYPESupply,installation,testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drainpan, other necessary supports etc., suitable for operation on single phase AC supply 230V±10%, 50Hz complete as required. The units hall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.4 TR

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquidlines, all accessories as per specifications etc. as required :15.86mm dia (OD) (Softdrawn) with tube thickness 1.2mm with 19mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquidlines, all accessories as per specifications etc. as required :19mm dia (OD) (Softdrawn) with tube thickness 1.2mm with 19mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquidlines, all accessories as per specifications etc. as required :25.4mm dia (OD) (Softdrawn) with tube thickness 1.2mm with 19mm thick insulation

Supply Installation, Testing & Commissioning of 2 ton 3 star split AC with Copper Pipe, Steblizer,with outlet pipe terminated to neareast drain, all complete. Make Voltas,Lloyd,Carrier.

Providing 6Kg Fire Extinguisher Mono Ammonium Phoshate Powder 50, Stored Pressure Type, Pressure Gauge, Gross weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism, Range minimum 4 meters, applicable on Class A,B,C and electrically started Fire, A Rating 21A, B Rating 898, Can construction: Deep drawn & Co., Mig welded, valve construction : Forging and Machining, Internal Coating of Can ; Epoxy powder coating, External Coating of Can : Epoxy Polyster power coating, sheet metal thickness: 1.60MM, Helium Leak Detection Tested, lSI and EN Approved, 5 years

Providing & PlacingWOODEN ALMIRAHProviding & PlacingChair-Pedestal BaseGlass Fibre Nylon with ABS/ NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm SizeArm Material:pu foam bonded chrome cotedseat material:PU Foam covered with Fabric Material of Fabric Back Cover / Material for Backrestmesh fabricMaterial of Fabric of Seat Coverfoam liminated mesh fabricsChair Typeonly revolving without tilting mechanismHeight Adjustment ± 5(mm)up to 100 mmArmWithType of backrest supportbackrest symmetrical lumber supportArm TypeFixedErgonomic Seat DesignYesBack typefixedbackrest has separate adjustable headrestNoSeat typefixedNumber of arm movementN.ALumber supportintegratedOverall Chair Height ±15mm990Davis 850 X 700 mm (HxW) Wooden Almirah made up of Decorative Block Board MR Grade Conforming to IS 1659 Material of ConstructionDecorative Block Board MR Grade Conforming to IS 1659Number of Shelves (Nos)4,Number of Doors (Nos)2,Height in mm (±10 mm)850,Depth in mm (±5 mm)430,Width in mm (±10 mm)700,Thickness of Top in mm (±2 mm)18,Thickness of Sides in mm (±1 mm)18,Thickness of Back in mm (±1 mm)12,Thickness of Bottom in mm (±1 mm)18,Thickness of shelf in mm (±1 mm)18,Thickness of Door in mm (± 1 mm)18,Type of Doors:Hinged doors of equal width hung with auto closing hinges of 0 cranking overlay type

Providing & PlacingWooden Single Bed Single Bed Opening From Top 1830 1200 40 Type of BedSingle BedMaterial of Bed FrameFlat single layer MDF board of grade SBG II of IS 12406/LatestHeadrest providedYesLegrest providedYesOpening of Storage BoxOpening From TopNumber of Openings (Nos)2Hydraulic System provided for OpeningNoTop Panel have Supports from all the four sidesYESLeg DetailsTeak woodNumber of Supports under Bottom Panel of storage box (Nos)4 Mattress Fixing Length ±10 (mm)1830Mattress Fixing Width ±10 (mm)1200Mattress Panel Height ±5 (mm)40Depth of Storage Box in mm (±10 mm)550Thickness of Mattresses Panel ± 1(mm)19Thickness of Bottom Panel of Storage Box ±1 (mm)19Thickness of Front, Back and Side Panels ±2 (mm)18Thickness of material of Headrest ±2 (mm)36Overall Height of Headrest ±5 (mm)300Length of Headrest ±10 (mm)1833Thickness of material of Legrest ±2 (mm)18Overall Height of Legrest ±5 (mm)500Overall Length of Legrest ±10 (mm)1833Size OF SUPPORT for Top Panel ±2 (mmxmm)50 x 25Size of Supports on under Bottom Panel of storage box ±2 (mmxmm)35 x 35

Providing & PlacingMirror Black bathroom or toilet mirror 6 ShapeSaint GobinR(Mirror) Overall Width (mm)1220Overall Height (mm)2500Mirror Thickness (mm)6FrameWithFrame MaterialwoodenbackframeFrame Width (mm)14Frame Thickness (mm)14Mirror Backside SupportYesFixing ArrangementHanging SystemGrinding of Mirror EdgesYesGlass Sheet for MirrorFlat Tranparent Sheet Glass of Quality AA/SSQ Conforming to IS 2835/1987 Mirror CoatingSilver coating which shall be protected by Copper coating and Copper coating shall be protected by a paint coatin

Providing & PlacingTable Executive Table of Teak wood 1200 millimeter 600 millimeter 800 millimeter Storage providedBoth sideKeyboard trayProvidedFoot restProvidedTable top MaterialTeak woodGable end and modesty panel materialCarved teak woodLeg MaterialNO LEGSThickness of table top ±2 mm25 millimeterLength of table top ±10 mm1200 millimeterDepth of table ±10 mm600 millimeterHeight of table ±10 mm800 millimeterDimension of leg(mmXmm) ±5mmNo legsNumber of Storage unit providedDouble storageMaterial thickness of footrest ±2mm15mm

Providing & PlacingOffice table MODULAR TABLE L X D & H 1500 millimeter X 750 millimeter 800 millimeter Length of Table Top ±10(mm)1500 millimeterDepth of Table Top±10(mm)750 millimeterHeight of Table Top±10(mm)800 millimeterMode of Supply of modular tableKnocked Down to be assembled at consignee site by the SellerStorage Providedone sideNumber of storage unitsingle storageTable Top material and thickness ±3mm25mm thickness Flat single layer MDF board of Grade SBG II of IS 12406 LatestWarranty period in number of years4

Providing & PlacingOffice AlmirahWOODEN Material of ConstructionISI Marked, single layer MDF Board conforming to Grade SBG II of IS 12406/2003 laminated with 0.6-0.8 mm thick lamination conforming to IS 2046/1995 and balancing lamination of 0.5 mm thick on the back sideNumber of Shelves (Nos)3Number of Doors (Nos)2Height in mm (±10 mm)1650Depth in mm (±5 mm)450Width in mm (±10 mm)760Thickness of Top in mm (±2 mm)18Thickness of Sides in mm (±1 mm)18Thickness of Back in mm (±1 mm)12Thickness of Bottom in mm (±1 mm)12Thickness of shelf in mm (±1 mm)18Thickness of Door in mm (± 1 mm)18Type of DoorsHinged doors of equal width hung with auto closing hinges of 0 cranking overlay type

Providing & PlacingOFFICE CHAIR OFFICE CHAIR OFFICE FURNITURES Pedestal BaseChrome finish with 5 wheelsArm Materialpu foam bonded chrome cotedseat materialPU Foam Covered With pure leatherMaterial of Fabric Back Cover / Material for BackrestLeatheriteMaterial of Fabric of Seat CoverleatheriteChair TypeTorsion Bar mechanism with single point lockingHeight Adjustment ± 5(mm)up to 100 mmArmWithType of backrest supportbackrest symmetrical lumber supportArm TypeFixedErgonomic Seat DesignYesBack typefixedSeat typefixedLumber supportexternal & fixedOverall Chair Height ±15mm1180Backrest Height ±15mm730 millimeterBackrest Width ±10mm520 millimeterSeat Height ±15 mm480Seat Width ±10 mm500Seat Depth ±10 mm480 millimeterThickness of MS Plate Joining the under structure with Seat2 millimeterThickness of Plywood used in Seat ±1(mm)12 mmThickness of Plywood used in Backrest ± 1(mm)12 mmThickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm)35 mmThickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM)35 mm

Providing & PlacingOFFICE CHAIR brown 3 Number any other wood of minimum 25 mm thicknessLength of Three Seater Units in mm (±10 mm)1750Depth of Sofa Units in mm (±10 mm)900Sofa Height (Without Back Cushion) ±5 (mm)450 millimeterSofa Height (With Back Cushion) ±5 mm800 millimeterSeat Cushion Length ±5 (mm)1700Seat Cushion Width ±5 (mm)510Seat Cusion Thickness ±5 (mm)100Backrest Cushion Length ±5 (mm)1450Backrest Cushion Width ±5 (mm)508Number of Three Seater Units (Nos)1Frame CoveringPartially UpholsteredBackrest Cushion MaterialfoamDensity of Cushion of Backrest Material (Kg/Cubic M)28Covering Material for Seat and BackrestLeatherite MaterialFrame Structure Material and size (±1 mm)any other wood of minimum 25 mm thicknessSeat Cusion MaterialfoamDensity of Cushion of Seat Material ±3 (Kg/Cubic M)35Type of Spring in the Base / Seatingweb suspensionDimensionLength of Three Seater Units in mm (±10 mm)1750Length of Four Seater Units in mm (±10 mm)N.ADepth of Sofa Units in mm (±10 mm)900Sofa Height (Without Back Cushion) ±5 (mm)450 millimeterSofa Height (With Back Cushion) ±5 mm800 millimeterArm Width ±5 (mm)100 millimeterArm Height ±5 (mm)550 millimeterSeat Height (With Seat Cushion) ±5 (mm)450 millimeterSofa Leg Height ±2(mm)150 millimeterSofa Leg Width / Diameter ±2 (mm)25 millimeterSeat Cushion Length ±5 (mm)1700Seat Cushion Width ±5 (mm)510Seat Cusion Thickness ±5 (mm)100Backrest Cushion Length ±5 (mm)1450Backrest Cushion Width ±5 (mm)508Backrest Cushion Thickness ±3 (mm)60Thickness of Foam in arms ±2 (mm)N.AThickness of Foam in back ±2 (mm)50 millimeterThickness of Foam in front ±2 (mm)15 millimeterThickness of Foam in sides ±2 (mm)10 millimeterColour & FinishColour of Polish on exposed Wood framedark brownColour of Covering Materialbrown

Providing & PlacingChairSEATING CHAIR Type of material (other then wood) used in Polythene cane Chairhot pressed boardMaterial of Fabric Back Coverleather foamFrame MaterialCRCA ERW round pipeMaterial of Fabric of Seat CoverfabricThickness of Plywood used in Seat ±1(mm)12 mmGSM/Thickness of Fabric ±5 (Gram per Sq Meter)80 Gram per Sq MeterArm MaterialCRCA pipeThickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm)25 mmThickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm)15 mmChair TypeWith ArmsType of Seat and BackrestMade of Polythene caneFrame Type4 LegsCastorsWithoutSize of Material (mm)14 SWG 25 mm round pipeChair Height ±15(mm)890 mmSeat Depth ±10(mm)450 mmSeat Width ±10 (mm)470 mmSeat Height IN MM ±5(mm)430Backrest Width ±10(mm)380 mmBackrest Height ±10(mm)450 mmArm Length ±5(mm)450 mmArm Width ±2(mm)40 mmPaint Typeepoxy polyster

Providing & Placing Dining teble with chair set,Dimension:-table:l-59,w-35.5,h-29.5, chair:l-16.5,w-16.5,h-38,Stone and Marble on table top white no of chair 6 nos with table.chair feature Embossing and Engraving

Providing & PlacingStore roomHSI 900 mm wide 1800 mm high Metal Shelving RacksHSIR(RACK) TypeOPEN TYPENumber of Shelves/Compartments (Top / Ceiling Shelf - not to be counted)6Shelves Material0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513Depth in mm (±5 mm)380Width in mm (±5 mm)900Height in mm (±5 mm)1800PaintStove enameled

Providing & PlacingTable DIRECTOR OFFICE TABLE SETCOMFFITSR Table top MaterialMDF board of grade SBG II of IS 12406/LatestGable end and modesty panel materialFlat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/LatestLeg MaterialOther woodThickness of table top ±2 mm38 millimeterLength of table top ±10 mm2100 millimeterDepth of table ±10 mm850 millimeterHeight of table ±10 mm750 millimeterDimension of leg(mmXmm) ±5mm50mmX50mmNumber of Storage unit providedDouble storage

Providing & PlacingChair Chair-Pedestal BaseGlass Fibre Nylon with ABS/ NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm SizeArm Material:pu foam bonded chrome cotedseat material:PU Foam covered with Fabric Material of Fabric Back Cover / Material for Backrestmesh fabricMaterial of Fabric of Seat Coverfoam liminated mesh fabricsChair Typeonly revolving without tilting mechanismHeight Adjustment ± 5(mm)up to 100 mmArmWithType of backrest supportbackrest symmetrical lumber supportArm TypeFixedErgonomic Seat DesignYesBack typefixedbackrest has separate adjustable headrestNoSeat typefixedNumber of arm movementN.ALumber supportintegratedOverall Chair Height ±15mm990

Providing & PlacingSofaTotal Number of Seats in the Sofa Set (Nos):3Covering Material for Seat and Backrest:rexinFrame Structure Material and size (±1 mm):19mm thick Commercial Block Board MR Grade Conforming to IS 1659Seat Cusion Material:foamLength of Three Seater Units in mm (±10 mm):1400Depth of Sofa Units in mm (±10 mm):530Sofa Height (Without Back Cushion) ±5 (mm):650 millimeterSofa Height (With Back Cushion) ±5 mm850 millimeterSeat Cushion Length ±5 (mm)740Seat Cushion Width ±5 (mm)510Seat Cusion Thickness ±5 (mm)150Backrest Cushion Length ±5 (mm)740Backrest Cushion Width ±5 (mm)710WARRANTY PERIOD IN NUMBER OF YEARS:1

Providing & PlacingRacks for locker roomMaterial:Mild steelMaterial of door:MetalTypes according to the number of lockers:OtherFinishPowder :CoatingLock Type:Cam LockConforming to IS 5244:1991YesStandard Mark:No

Providing & Placing THREE SEATER Class Room Desking / Seating ONLY SEATINGWoodcareR TYPE OF DESKINGONLY SEATINGDesking ConfigurationTHREE SEATERLength of Desking, Seating and Backrest (if provided) in mm (±10 mm)1150Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm)18 mm thick prelaminated Particle BoardWidth of backrest if provided in mm (± 5 mm)No BackrestBack Support for Seating of Same materail as Seatingback support not provided Material of Support StructureMild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mmMaterial of Seat Cushion40 mm thick PU foam of density 40 gram per cubic cmWidth of Seating in mm (±10 mm)550Height of Seat in mm (±10 mm)460Width of backrest if provided in mm (± 5 mm)No BackrestBack Support for Seating of Same materail as Seatingback support not provided

Providing & PlacingSofa black 5 Number MILD STEEL STRUCTURE NEEMANR (Sofa) Total Number of Seats in the Sofa Set (Nos)5Number of Single Seater Units (Nos)2Number of Two Seater Units (Nos)NO TWO SEATER UNITNumber of Three Seater Units (Nos)1Number of Four Seater Units (Nos)NO FOUR SEATER UNITSFrame CoveringFully UpholsteredSofa Set is Foldable to use as bedNoCovering Material for Seat and BackrestLeatheriteFrame Structure Material and size (±1 mm)MILD STEEL STRUCTURESeat Cusion MaterialfoamType of Spring in the Base / SeatingZig zagLength of Single Seater Units in mm (±5 mm)935Length of Two Seater Units in mm (±10 mm)N.ALength of Three Seater Units in mm (±10 mm)1980Length of Four Seater Units in mm (±10 mm)N.ADepth of Sofa Units in mm (±10 mm)760Sofa Height (Without Back Cushion) ±5 (mm)450 millimeterSofa Height (With Back Cushion) ±5 mm850 millimeterSeat Cushion Length ±5 (mm)710Seat Cushion Width ±5 (mm)510Seat Cusion Thickness ±5 (mm)175Backrest Cushion Length ±5 (mm)710Backrest Cushion Width ±5 (mm)

Providing & PlacingOpen RackTypeCLOSED FROM SIDES AND BACKNumber of Shelves/Compartments (Top / Ceiling Shelf - not to be counted:)4Shelves Material:0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513Depth in mm (±5 mm)600Width in mm (±5 mm)900Height in mm (±5 mm)2175PaintPowder coatedWARANTEE PERIOD IN NUMBER OF YEARS:1

Providing & PlacingCentre Table Number of storage under to:pNo storageTop material:MarbleFrame material:Stainless steel SS 304Dimension of Top (length X Breadth) ±20mm550mmX450mmHeight of centre table ±10 mm410 millimeterThickness of top material (+/-2 mm)25 millimeterThickness of frame material (+/- 1 mm)12 millimeterWarranty period in number of years:1

O&M of Gym Equipments With Reguler cleaning and insure of proper working of equipments.

Water Bound Macadam - II with crushable screenings,Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications

Prime Coat @ 0.85kg per sqm Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per technical clause 503 of MORT&H specifications

Providing and laying 50mm - 75 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORT&H specificationsGrading - II (19 mm Nominal Size)

Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications

Providing and laying 12 mm thick mastic asphalt wearing course on top of deck slab excluding prime coat with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 9.5 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces not less than 100 deg. C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516 of MoRTH Specification (5th Revision, 2013)