Karnal Smart City Limited Tender

Sprinkler & Accessories Providing & Fixing of 2" inlet Gear Driven Pop up capable of delivering 11- 16lps with radius of coverage from 40-45m at 5.0 - 6bar. The sprinkler shall be available with six (6) numerically coded nozzles with a trajectory of 26°. The sprinkler shall be adjustable in both part circle and a true full continuous 360°circle configuration. The adjustable part circle unit shall be minutely adjustable from 40°to 360°. The sprinkler shall have a top arc adjustment carried out by rotation of a flat blade screwdriver within the top cover. The sprinkler shall have an arc indication arrow on the top of sprinkler displaying the coverage pattern set. The sprinkler shall also have a friction-clutch mechanism to allow for 360°+ forward or reverse movement of nozzle turret without damage to the internal gear components. Sprinkler shall have a memory arc clutch feature to allow original arc pattern to be automatically resumed following disturbance to nozzle turret. The adjustable unit shall be adjustable in all phases of installation (i.e., before installation, after installation while static, and after installation while in operation). Make-PGP SIME Italy, VP3 Perrot Germany, Rain s.p.a. Italy, Hunter USA

Providing & Fixing of Gear Driven Pop up capable of delivering 0.32- 1.84lps with radius of coverage from 13.7-22.0m at 2.0 - 6.2bar. The sprinkler shall be available with six (6) numerically coded nozzles with a trajectory of 26°. The sprinkler shall be adjustable in both part circle and a true full continuous 360°circle configuration. The adjustable part circle unit shall be minutely adjustable from 40°to 360°. The sprinkler shall have a top arc adjustment carried out by rotation of a flat blade screwdriver within the top cover. The sprinkler shall have an arc indication arrow on the top of sprinkler displaying the coverage pattern set. The sprinkler shall also have a friction-clutch mechanism to allow for 360°+ forward or reverse movement of nozzle turret without damage to the internal gear components. Sprinkler shall have a memory arc clutch feature to allow original arc pattern to be automatically resumed following disturbance to nozzle turret. The adjustable unit shall be adjustable in all phases of installation (i.e., before installation, after installation while static, and after installation while in operation). The features of pop-up should be: i) ABS Riser having 1" inlet & 4" Riser Height . ii) Arc memory clutch with position recall. iii) Top Arc Adjustment with Graduated Arc Set Degree Marking on top. iv) Reverse Mechanisms. v) Optional Check Valve for Elevation Difference. Make-K-Rain USA ; Vyrsa Spain; Rain s.p.a. Italy, Hunter USA

Providing & Fixing of 1" One piece Brass QCV with lockable mechanism. It has auto close lid made of heavy duty rubber when QCV is not in use, one piece construction, having stainless steel spring, brass valves. Make: Rainbird USA -5NP; TORO USA -100SLLVC; AQUA (71BRL)

Providing & Fixing of 1" Brass QCV Key with handle with 1" outlet. Make-Rainbird USA 55K-1; Toro USA -100 SLK; AQUA -71BR

Providing & Fixing of 1" Brass QCV Key Brass swivel elbow. Make-Rainbird USA SH 2; Toro USA -100 MHS; AQUA -71SE

Providing & Fixing of PP Service Saddle 1" with brass thread of OD 90mm. Make: Rainson ; Aqua ; Fusa.T

Valves & Accessories Providing & Fixing of 6" Butterfly Valve for Isolation. It shall be with integral synthetic rubber lining. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 10 bar and hydraulic seat test pressure of the product is 8 bar. Make: Sant; Leader; Audco

Providing & Fixing of 4" Butterfly Valve for Isolation. It shall be with integral synthetic rubber lining. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 10 bar and hydraulic seat test pressure of the product is 8 bar. Make: Sant; Leader; Audco

Providing & fixing of Valve box 20" Rectangular Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture. Make: Rain Bird USA- (VB-JMB); Cepex (Jumbo-02675); Rain s.p.a. Italy (PZRM-115)

Providing & fixing of Valve box 6" Round Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture. Make: Rain Bird USA- (VB-7RND); Cepex (Round-0267); Rain s.p.a. Italy (PZCM-RN15)

Providing and fixing of Hydraulic quick Pressure relief valve size 2" along with bypass arrangement, cover & necessary fittings. It shall be adjustable Pressure setting from 22 PSI - 120 PSI for maximize performance. It should be high strength Plastic, Stainless Steel shaft offer, strength and corrosion resistant. Oil tempered coil spring provides quick response for individual pressure range. Make: Bermad (1R-13Q); Dorot (75-3 way); Hydromat India

Providing & fixing of a double acting Continuous Air release valve 2" made of Aluminum / Engineering plastic. The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation. The working pressure shall be 10 Bars and testing pressure shall be 16 Bars. Make: Bermad (K10); Aqua (90CP); Dorot (DAV-P-K)

Filtration Unit Providing & Fixing of Automatic Disc filter (120 mesh) 100m3 /hr having an inlet & two outlets connections of 4", 2 pressure gauze ports of 3/4" ,a helix made of fiber glass reinforce polyamide at base of disc filter cartridge to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 14 bars. It shall be adjusted on real time based or the pressure difference based. Make: Amaid Israel; Arkal Israel; Armas Turkey; Hydromat India

Providing & Fixing of Automatic Disc filter (120 mesh) 50m3 /hr having an inlet & two outlets connections of 3", 2 pressure gauze ports of 3/4" ,a helix made of fiber glass reinforce polyamide at base of disc filter cartridge to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 14 bars. It shall be adjusted on real time based or the pressure difference based. Make: Amiad Israel; Arkal Israel; Armas Turkey; Hydromat India

Providing & Fixing of SS Body Pressure Gauge (Glycerine filled) 2.5" DIAL with 0 -10 kg/cm2. Make: WIKA; AUTOMAT; Fiebig

Providing & Fixing of 4" BSP Straight flow Solenoid valve with victaulic coupling, flow control which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for " tamper proof" operation. The valve shall operate with minimum 24 VAC at 10.5 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation. Make: Rain s.p.a. Italy; Toro; Dorot; Hydromat India

Providing & Fixing of sequential controller with key operation capable of operating 2 solenoid valves at a time complete with outdoor installation wall mounted type. Make: Rain s.p.a. Italy; AUTOMAT; HIT USA

Providing & fixing of DBR Connectors. It shall be pre filled, low voltage, dry splice, Direct Bury, water proof wire connector that protect electrical connection from corrosion and moisture. Each splice Kit contains Two wire nuts, water proof, Gel- filled housing and 1 dual splice organizer. Make: Toro USA; Rain Bird USA; HIT USA; Hunter; AUTOMAT

Providing & fixing of Pump Start Relay enclosure shall be constructs with a corrosion resistant, UV resistant and shock proof, rain tight, secure and rust proof enclosure. Make: K-Rain (USA) ; PLA (India); Siemens (India)

Providing & fixing of 1.5 mm2 single core copper conductor cable 24 volt. Make: Finolex (India); Empire (India); Polycab (India)

Providing & fixing of 10 mm2 triple core copper conductor cable 24 volt. Make: Finolex (India); Empire (India); Polycab (India)

Providing & fixing of Conduit Pipe 1" dia for laying of electric wires. Make: AKG (India); Finolex (India); Supreme (India)

Pumping Unit Providing & Fixing of Booster Pump Capable of Discharging 33cu m @ 60mtr Head with Control Panel having ammeter, voltmeter, single phase preventer, and all necessary protections , Foot Valve, Non Return Valve, Suction and Delivery assembly. Make: Kirloskar (India); Crompton Greaves (India); CRI (India)

Providing & Fixing of Booster Pump Capable of Discharging 100cu m @ 85mtr Head with Control Panel having ammeter, voltmeter, single phase preventer, and all necessary protections , Foot Valve, Non Return Valve, Suction and Delivery assembly. Make: Kirloskar (India); Crompton Greaves (India); CRI (India)

Providing & Fixing of Water Level Sensor. Make: Automat (India); Havells (India); Minilac (India)

Supplying, erection, testing and commissioning of 5.5 kiloWatt 2.5 LPS Three Phase-Submersible Pump Set having head 110 m. Make: KSB, CRI, Kirlosker, Crompton Greaves, Lubi)

Cautionary sign board 600x600x600mm triangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 3 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45xD.45xD.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 Using retro reflective Sheeting Class C as per IRC 67 2012

Precasting and placing in position 125 mm dia Bollards 600 mm each high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement: 3 coarse sand (zone-Ill): 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing.

Moulded Shank Road Stud Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values@ ASTM E 809 & ASTM D 4280. The detailed specifications and the product shall conform to ASTM D4280 and ASTM E 809. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 like abrasion resistance and fixed to the road surface using the epoxy adhesive. Two cylinderical polymer shanks of not less than 20 mm diameter and not less than 30 mm length shall be moulded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl Methacrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Note:- 1. A sealing primer may be applied in advance on cement concrete pavement to ensure proper bonding. Any laitance and/or curing compound to be removed where paint is required to be applied on concrete surface.

Turfing lawns with fine grassing ( selection no.1/ Bermuda and Mexican/Neelgiri grass )including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying of selection no. 1 / Bermuda doob grass and Mexican/Neelgiri grass roots, including supplying and spreading of farmyard manure at the rate of 0.60 cum per 100 sqm, maintenance till weed free turf is formed Providing and fixing Neelgiri/ Mexican grass turf with earth 50mm to 60 mm thickness and ramming with required wooden tools, rolling with light roller to make the surface smooth and even.

Drawing & Painting Art Work with Exterior Emulsion water based Paint of image selection by engineer in charge.