Irrigation And Water Resources Department Tender
... More
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 10,23,820Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HRY_100228_1Bid Award Id
ViewTender No
09/2019Tender Authority
Irrigation And Water Resources Department ViewPurchaser Address
-Website
http://https://hid.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Design mix cement concrete of grade M-15 with minimum cement contents 240Kg/Cum in foundation and plinth (HSR item No. 10.64)
738.87
-
-
... More
Design mix cement concrete of grade M-25 with minimum cement contents of 300Kg/cum in foundation and plinth (HSR item No. 10.66)
279.2
-
-
... More
Design mix cement concrete of grade M-25 with minimum cement contents of 300 kg /cum in first storey upto 4 meter above plinth level. (HSR item No. 10.73)
191.83
-
-
... More
Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded.(HSR item No. 10.114)
11.92
-
-
... More
Fe-500 EQR TMT steel bars for RCC works, where not included in the complete rate of RCC including cutting, bending, binding & placing in position complete (HSR item No. 18.22)
1182.86
-
-
... More
Centering and shuttering for foundations, for faces of concrete foundation and foundation beams (vertical or battering) (HSR item No. 9.13)
874.64
-
-
... More
Centring and shuttering for flat surfaces such as suspended floors,roofs, landings, chajjas, shelves etc . Inclination not exceeding 25 degree with horizointal (HSR item No. 9.1)
426.66
-
-
... More
Centring and shuttering for side and soffits of beams hunchings, girders, bressumers and lintels (HSR item No. 9.7)
1115.64
-
-
... More
Centring and shuttering for columns (square or rectangular or polygonal in plan) (HSR item No. 9.9)
1278.24
-
-
... More
First class brick work laid in cement, stone dust (from crusher) mortar 1:6 in foundation and plinth (HSR item No. 11.22)
677.73
-
-
... More
First Class brick work laid in cement sand mortar 1:6 in first storey upto 4 Mtrs. above plinth level (HSR item No. 11.7)
27.32
-
-
... More
First class brick work laid in cement cement, stone dust (from srusher) mortar 1:6 in first storey upto 4 Mtr above plinth level (HSR item No. 11.27)
696.27
-
-
... More
11.43 cm thick brick wall with every, fourth course, reinforeced with hoop-iron, laid in 1:4 cement sand mortar in super structure (HSR item No. 11.46)
4.2
-
-
... More
First Class brick work laid in cement sand mortar 1 : 6 in foundation and plinth (HSR item No. 11.2)
19.18
-
-
... More
Providing & laying four courses of water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown type bitumen grade 85/25 applied hot at 1.20 kg / sqm of area of each course, second course on roofing felt type 3 grade-1 (Hessian base self finished bitumen felt) and fourth and final course of stone grit spread at 0.006 cum per sqm including preperation of surface complete. (HSR item No. 13.61)
103.49
-
-
... More
Wrought iron and mild steel (using angles and,flats, bars , tees and channels ) ladders grills , gratting frames, window guard, iron Door openable or parapet or any other type of railing, gates and tree guards, etc., including cost of screws and welding rods or bolts and nuts complete fixed in position.(HSR item No. 18.12)
474.8
-
-
... More
Supplying and Fixing rolling shutters, of approved make, M.S. Laths,interlocked together, at the end, by end locks mounted on specially designed pipe shaft,with brackets,side guides and arrangements for inside and outside locking with push and pull operation complete, including cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454-Part-1 and M.S top cover of required thickness for rolling shutters 80x1.25mm M.S laths with 1.25mm thick top cover.(HSR item No. 18.18 (a)
48.6
-
-
... More
Providing and fixing porcelain mossaic tiles at finished plain Plastered wall surface of size as per Architect drawing in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Make; PICCOLO, NITCO, KAJARIA, SOMANY, ORIENT, SIMPOLO.(NS)
152.41
-
-
... More
Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR item No. 14.1)
76.62
-
-
... More
Conglomerate floor 25mm thick cement concrete topping 1:2:4 (HSR item No. 14.8)
31.49
-
-
... More
Providing and fixing vitrified tiles 600X600 mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shades to tiles. Notes: Tiles shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANY, ORIENT, SIMPOLO. (HSR item No. 14.89)
46.62
-
-
... More
Providing and fixing vitrified tiles of size 600X300 mm of approved make in skirting/dados laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shades to tiles. Notes: Tiles shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANY, SIMPOLO. (HSR item No. 14.90)
56.5
-
-
... More
Providing and fixing 1st quality ceramic glazed tiles conforming to IS15622( thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 Kg per sqm. including pointing in white cement mixed with pigment of matching shade (b) Size of ceramic Glazed tiles 300X450mm. (HSR item No. 14.92 (b)
26.88
-
-
... More
Extra for providing and laying epoxy grout (Letecrete or Mepai ) in tiles in place of cement grout (NS)
103.12
-
-
... More
Providing, laying and fixing granite stone in all shades 15mm to 18mm thick in flooring and skirting stairs (treads and risers) laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone including the cost of grinding and diamond cut polishing to the satisfaction of the Architect. ( Basic Rate of Granite Stone 1750 / SQM ) (HSR item No. 14.96)
76.2
-
-
... More
Granite of any colour and shade area of slab upto 0.50 Sqm (DSR item No. 8.2.2.1
163.5
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab jet black, cherry red, elite brown, cat eye or equivalent (DSR 8.12)
20.25
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25mm thick (DSR 11.26.1)
1365.13
-
-
... More
Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: (DSR 11.53)
227.52
-
-
... More
12mm thick cement plaster 1:5 (HSR item No. 15.6)
147.74
-
-
... More
18mm cement plaster in 2 coats under layer 12mm thick cement plaster 1:5 ( 1 cement, 5 coarse sand ) and top layer 6mm thick with cement mortar 1:3 ( 1 cement, 3 coarse sand ) finished rough with sponge. (HSR item No. 15.20)
111.2
-
-
... More
10mm thick cement plaster 1:4 on under sides of ceilings. (HSR item No. 15.52)
176.09
-
-
... More
Preperation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete. (HSR item No. 16.24)
111.2
-
-
... More
Painting two coats of weather Shield exterior acrylic paint in all shades on newly plastered or concrete surface of walls. Make: Asian, Dulux, Nerolac-First Quality (HSR item No. 16.79 (b)
111.2
-
-
... More
Preperation for plastered surface for water bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish complete. (HSR item No. 16.52)
264.12
-
-
... More
Distempering with washable water bound distemper (of approved manufacture) two coats over one priming coat on new work. Make: Asian, Dulux, Nerolac. (HSR item No. 16.58)
264.12
-
-
... More
15mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR item No. 15.12)
903.15
-
-
... More
Applying 1 coats primer 2nd class and painting 1st class 2 coat (HSR item No. 16.25 and 16.26)
756
-
-
... More
Applying priming coat and painting 2 coats on steel works (HSR item No. 16.102 and 16.17)
1115.46
-
-
... More
Washed stone grit plaster on exterior walls of height upto 10 metre above ground level, in two layers, under layer 12mm cement plaster 1:4 (1cement: 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand :2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately). (DSR13.72)
1257.15
-
-
... More
Kalpna Chawla murals on sand stone (64 Sft area)(NS)
1
-
-
... More
Providing and laying 4ft x 4ft x 4ft natural rock boulder in water body including loading, unloading and transportation, sharp edges should be rubbed for safety (MR)
6
-
-
... More
Providing paddle boat (MR)
6
-
-
... More
Cement concrete 1:4:8 with stone aggregate 20mm nominal size (HSR item no. 10.38)
62.37
-
-
... More
Preparation of sub grade including trenching, rough dressing of spoil, final dressing of earth ,to given levels and camber , watering , rolling with road roller , and compaction the bed. (HSR item No. 24.1)
380
-
-
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density (DSR 16.4)
340.5
-
-
... More
Pre cast cement concrete 1:2:4 stone aggregate 20mm nominal size in Kerbs in the like items finished smooth with 6mm thick cement plaster 1:3 on exposed surface including formwork, placing & fixing in position, complete at the ground level or in first storey.(HSR item No. 10.77)
109.35
-
-
... More
Providing & laying 60mm thick interlocking paver blocks of all shape in colors in design mix M-35 over a bed of 25mm thick fine sand complete in all respect. (HSR item No. 10.158)
2280
-
-
... More
Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. (DSR 16.72)
50.91
-
-
... More
Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately). (DSR 16.73)
205.71
-
-
... More
75mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with stone aggregate 20mm nominal size (DSR 16.74.2)
1920
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (HSR item NO. 28.50 (e)
384
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (HSR item No. 28.50 (c)
384
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge. (HSR item No. 28.50 (b)
384
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge. (HSR item No. 28.50 (d)
384
-
-
... More
Providing and laying pressed clay tiles (as per approved pattern 20mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement :4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20mm thick cement mortar 1:4( 1 cement : 4 coarse sand) and finished neat complete. (DSR 12.20)
412.32
-
-
... More
Dismantling rubble stone masonry in cement (HSR item No. 8.1 (d)
15
-
-
... More
Dismantling brick work or tile lining and tile terracing in cement (HSR item No. 8.5 (b)
189.52
-
-
... More
Dismantling cement concrete plain 1:2:4 (HSR item No. 8.6 (d)
1736
-
-
... More
Dismantling of RCC with cleaning and straightening and cutting of bars if required (HSR item No. 8.6 (e)
33.48
-
-
... More
Removing doors (wood and steel) (HSR item No. 8.17 (a)
6
-
-
... More
Removing windows (wood and steel) (HSR item No. 8.17 (b)
6
-
-
... More
Dismantling steel work upto a height of 5 mtrs in builtup section in angles, tees, flats and channels including all gusset plates, bolts, nuts, beading etc including dismembering (HSR item No. 8.22 (a)
250
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and parttions with extruded buit up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required neoprene felt etc. aluminium sections shall be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle. Auminium snap beading for glazing/pancilling C.P. brass/stainless steel screws, all complete. Fixed portion (Anodised aluminium transparent or dyed to required shade according to IS :1868, minimum anodic coating of grade AC 15.(HSR item No. 17.95)
20.16
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and parttions with extruded buit up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required neoprene felt etc. aluminium sections shall be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle. Auminium snap beading for glazing/pancilling C.P. brass/stainless steel screws, all complete. Shutters of door, windows and ventilators including providing and fixing hinge/pivotsand, making provision for fixing of fittings wherever required including the cost of PVC/Neoprene gasket required including aluminium fittings and aluminium grills etc. (HSR item No. 17.96)
35.2
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and parttions with extruded buit up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required neoprene felt etc. aluminium sections shall be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle. Auminium snap beading for glazing/pancilling C.P. brass/stainless steel screws, all complete. Shutters of door, windows and ventilators including providing and fixing hinge/pivotsand, making provision for fixing of fittings wherever required including the cost of PVC/Neoprene gasket required including aluminium fittings and aluminium grills etc. Note (ii) Add Rs. 21/Kg extra if powder coating of 50 micron in done instead of anodising (HSR item No. 17.95 & 17.96)
55.36
-
-
... More
Providing and fixing glazing in aluminium door windows, ventilator shutter and partitions etc. with PVC/neoprene gasket etc. complete (cost of aliminium snap beading shall be paid in basic items). (HSR item No. 17.98 (b)
2.2
-
-
... More
Providing fixing aluminium round shape handle of outer dia 100mm with screws etc. Complete.(HSR item No. 17.102)
2
-
-
... More
Providing & Fixing 150mm floor brass door stopper, with rubber cushion, screws, etc to suit shutter thickness complete. (HSR item No. 17.75)
2
-
-
... More
Supplying and fixing hydraulic door closer I.S.I mark, with necessary screws, etc. Complete ISI designation No. III (size of door 851mm to 1000mm) (HSR item No. 17.82 (c)
2
-
-
... More
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR item No. 21.1.1.1)
120
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): with float glass panes of 8mm thickness (DSR 21.3.3)
40
-
-
... More
Providing & fixing in position 38 mm thick granite stone frames (2 strips) for door/ window/ ventilators 150 mm wide with 35 - 40mm rebate (for fixing the shutters etc.). the frames to be manufactured, hard pressed jointed properly in alighnment two pieces of granite stone 150 & 110 mm wide and 19 mm thick complete as per drawing and directions of the architect. The frames will include the cost of all related material and all labour what so ever. Also including , grinding, jointing & polishing etc. including diamond cut polishing in all storeys, height, levels and locations complete The cost of material and labour all holdfasts, necessary nuts/bolts and screws etc. will also be included in the rate. (NS)
13.2
-
-
... More
Wrought iron and mild steel (using angles, flats,square bars, tee and channels) ladders grills gratting frames, window guards, iron doors openable or fixed staircase or parapet railing, gates or tree guards etc. including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR item No. 18.10)
0.5
-
-
... More
“Providing & Fixing Toilet Cubicle (of Following Standard Dimensions Which Includes 600mm Door Size) Made of Heat , Bacteria, Water, Chemical, Scratch , Impact and Anti Bacterial Resistant 12mm Thick Soild Compact Laminate Panelstested By Sriram Test House. Finish of The Compact Lamimate Should Includes Doors, Pilasters & Intermidiate Panels Finished With Approved Texture/Shade As Per The Detail Drawings& As Per Is 2046 (Indian Standard) and As Per Fire Retardent Bs-476/97 Standard. The Product Should Have Green Gaurd Certificate. This Also Includes Providing and Fixing In Position Necessary Hardware Made Out of Stainless Steel (Grade 304) As Per Manufacturer'S Specifications & Architects Instructions Like (1) Door Knob, (2) Gravity Hinged, (3) Thumb Turn Lockset With Occupancy Indicators, (4) Coat Hooks With Door Stopper (5) U- Channels, (6) Adjustable Foot/Pedestal, (7) Top Rail With Corner Conntector (8) Ruber Noise Deafening Tape, (9) Screws and Wall Plugs. (Warranty of A Minimum of 2 Years) toilet 2025mmx1000mmx600mm make Greenlam,Marino- Cubical in WC (NS)
6
-
-
... More
Lowering salt glazed stone pipes and specials two trenches for all depths and laying out the same to correct alignment gradient, level etc. In trenches including all dressing and trimming of bed and sides of trenches, if required trimming and cutting of concrete beds and joint holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surroundinh benching, haunching and envelopes are completed. The sewer shall rest on a bed at every point throughout its length and to ensure this, it shall be grouted in without extra charge by the contractor with lime surkhi mortar, in the case of lime concrete beds and 1:3 cement sand mortar in case of cement concrete bed including cartage from Divisional store or nearest Railwat Station to site of work. The internal diameter of sewer being-200mm (HSR item No. 29.38)
50
-
-
... More
Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemo/yarn including finishing and trowelling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer line for leakage and making all leakages and defects good, complete as laid down in the contract specifications. The internal diameter of sewer or branch pipe being-200mm (HSR item NO. 29.39 (d)
70
-
-
... More
Construction of rectangular standard brick masonry manhole chambers to standard drawing on new. Egg-shaped sewers upto the required depth n 1:5 cement sand mortar, lime concrete 40 percent lime mortar with 19-20mm guage brick ballast in haunches above the arch ring where the depth of cover in traffic streets is less than 1.5 mts, 12mm thick water tight 1:2 cement sand plaster with a floating coat of neat cement and finished with two coats of sodium silicate on interior surface where required, reinforced cement concrete slab 180mm thick fixing 560mm internal diameter C.I. manhole frame and cover weight not less than 2.5 quintal painted with three coats of black bitumen paint, fixing galvanised malleable iron steps embedded in 1:2 cement sand mortar etc. complete. The rate also covers the cost of M.S steel for R.C.C. slab labour for fixing the carriage of C.I. manhole frame and cover the malleable iron steps from the stores of the Engineer-in-charge of the works to site of works. The rates further includes the cost of accurately planned and fitted centering, supports for all works, as well as for all curves and specials worls cleaning out their beds etc. sodium silicate shall be supplied free of cost at the stores of Engineer-in-charge. on egg shapped sewers of size 610mmx915mm to 860mmx1290mm for 2.40 Mtr. depth below ground level (HSR item No. 29.89 (i) (a)
16
-
-
... More
Providing and fixing in position best Indian make (Jaquar essco) Indian type water closet suite consisting of (i) closet set Vitereouschinaware WC pan with horiazontal inlet, for sinking into floor with a pair of footrests, 100 mm HCL'P" trap with of without vent as required and suitable joint for closet inlet.-ECS-WHT-45ILE (ii) Flushing cistern White.(NS)
2
-
-
... More
Providing and fixing in position best Indian make wall hung EUROPIAN water closet suite( as approved by Engineer-in-charge ) consisting of -(i) Wash down closet set Viterous china ware ( to the approval of the Engineer-in-charge) with 'P' or 'S' trap with or without vet as required and suitable joint for closet intlet; -(ii) One piece seat and soft closing lid in hollow black or white plastic fitted with stainless steel grade 304 hinges and rubber buffers; ( to the approval of the Engineer-in-charge) JQUARCNS-WHT-9635- White (NS)
4
-
-
... More
Providing & Fixing Jaquar make dual flush( 3/6 LPF) I- Flush for EWC wutg concealed body of Size 32 mm with inbuilt control cock.(NS)
6
-
-
... More
Providing and fixing in position best Indian make Suatting urinals consisting of-(I) Squatting plate urinals 375mm*315mm*620mm (URS-WHT-132530, Jaquar make ) in viterous chinaware,( as approved by the Engineer-in-charge-
4
-
-
... More
(ii) Providing and fixing CP Brass Jaquar make (PRS-073) Flusing valve for urinals with auto closing function size 15 mm(NS)
4
-
-
... More
(iii) Curved shaped urinal partition with frosted glass 8 mm thick size 900*400 mm toilet-JSE-CHR-810US450X.(NS)
2
-
-
... More
Providing and fixing in position best Indian make viterous chinaware sinks including all fittings.counter to top Basin size 60*400*175mm Jaquar make including 32 mm dia C.P. brass bottle trap (Jaquar) and union 32 mm dia C.P. pipes to wall flange. complete including cutting and making good the walls wherever required-SLSWHT-6601(NS)
8
-
-
... More
Providing and fixing push button soap dispensor SDR-WHT-DJ0010F of capacity .8 L of ABS materials White/Smoked finish Jaquar make(NS)
8
-
-
... More
Providing and fixing Pressmatic wall mounted basin Tap (Auto closing) with wall Flangs (Square) Jaquare PRS-061(NS)
8
-
-
... More
Providing and fixing in position best Indian make bevelled edge 5.5mm thick miror mounted on asbestos seat ground fixed in position by means of 4 Nos. of cromium plated brass screws or clamps as directed by Engineer-in-charge (600x450) (HSR item NO. 30.71 (a) (i)
12
-
-
... More
Providing and fixing in position 15 mm i/d C.P. brass bib cocks of best quality- Bib cock long body( as required by the Engineer-in-charge) HSR Item NO. 30.75 (a)
6
-
-
... More
Providing and fixing in positin C.P. brass stop cocks ( as required by the Engineer-in-charge)-(a) 15 mm stop cocks (I) stop cocks in male and female HSR item No. 30.76 (a) (i)
6
-
-
... More
Providing and fixing Hand Shower ( Health Fauced -Jaquar ALD-CHR-585) with 8 mm dia, 1 m long PVC tube and wall hook.(NS)
6
-
-
... More
Providing and fixing in position HCL soil waste vent or antisyponage pipes to ISI specification of ELC manufacture or of any other reputed firm including cutting and wastage etc and cutting holes in walls, roofs or floor etc. And making good to its original condition but excluding cost of lead jointing.-(A) 100 mm internal diameter HSR item No.30.84(A)
40
-
-
... More
Providing and fixing in position HCL soil waste vent or antisyponage pipes to ISI specification of ELC manufacture or of any other reputed firm including cutting and wastage etc and cutting holes in walls, roofs or floor etc. And making good to its original condition but excluding cost of lead jointing. (b) 75 MM internal clearance HSR item No. 30.84(b)
40
-
-
... More
Providing lead caulked joints to HCI pipes and specials conforming to ISI specifications to ELC manufacture or any other reputed firm including the cost of lead yarn, fuel and tools etc. (HSR item No. 30.87(a)
40
-
-
... More
Providing and fixing of HCI floor traps I.S.I marked of the self cleaning design with C.P brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors etc. minimum depth of water should be 150mm with minimum seal of 50mm with 75mm i/d outlet. (HSR item No. 30.89 (b)
8
-
-
... More
Providing and fixing in position automatic brass ball valves in tanks with copper ball 15mm internal diameter (HSR item No. 30.110 (a) (i)
4
-
-
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with HCI grating 150mmX150mm cast iron cover weighing approximately 7.26 kg and frame clear opening 300mmX300mm and outside size 330mmX330mm and chamber including cost of all brickwork in cement mortar 1:5 cement concrete 1:8:16 in foundations and cement concrete 1:2:4 in coping around C.I. cover and frame etc with three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design, minimum depth of water should be 150mm with a minimum seal 50mm. 100mm internal diameter S.E gully trap (HSR item No. 30.114 (a)
16
-
-
... More
Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including the cost of hoisting and placing in position, making connection with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer-in-charge (Except civil work). 700 ltr. capacity (HSR item No. 30.119)
4
-
-
... More
Supply and fixing of GI pipe of following size of Jindal/ Tata Mobile 'B' class including all fixtures and all other works contengent thereto. 20mm dia (HSR item No. 30.120 (a)
60
-
-
... More
Supply and fixing of G.I pipe of following size of Jindal/Tata Mobile 'B' class including all fixtures and all other works contengent thereto 15mm dia (HSR item No. 30.120 (b)
40
-
-
... More
Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connection Miniature Circuit Breaks of 9 K.A breaking capacity single pole-6 amp to 32 amp (SP) Havell's/Standard (HSR item No. 31.17(a) (ii)
34
-
-
... More
6 amp to 32 amp (SPN) Havell's/Standard (HSR iem No. 31.17(a) (ii)
6
-
-
... More
32amp TPN Havell's/Standard (HSR item No. 31.17(a) (ii)
3
-
-
... More
40amp to 63 amp (TPN) Havell's/Standard (63A) (HSR item No. 31.17 (a) (iii)
2
-
-
... More
Earthing with G.I. earth pipe 4.5m long and 40 mm dia with masonry enclosures on the top etc. as required. (HSR iem No. 31.22 (i)
25
-
-
... More
Extra for using salt and charcoal/coke for pipe earth electrode as required (HSR item No. 31.22(ii)
25
-
-
... More
Providing and fixing earth connection from earth electode with 4mm dia G.I wire in 15mm dia GI pipe from earth electrode as required (HSR item No. 31.22 (Xii)
75
-
-
... More
Supply and erection of underground cable 1Mtr below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. 25 sq mm 3.5 Core cable (HSR item No. 31.25 (xxv)
75
-
-
... More
6 sq mm 2 Core cable (HSR item No. 31.25 (iii)
19
-
-
... More
25 sq mm 3.5 Core Cable (HSR item No. 31.26 (xxv)
40
-
-
... More
16 Sq mm 4 Core cable (HSR item No. 31.26 (xl)
70
-
-
... More
Supply and erection of suitable compression type brass cable glads for underground cable- upto 6 sqmm cable 2 to 4 core (HSR item No. 31.28 (i)
6
-
-
... More
10 Sqm mm to 16 sqmm cable 2 to 4 core (HSR item No. 31.28(ii)
2
-
-
... More
25 sqmm to 50 sqmm cable 2 to 4 core (HSR item No. 31.28 (iii)
4
-
-
... More
MS pedestal of size 750mm wide,1200mm high and 300mm deep and bottom totally open, duly embedded in cement concrete block of size 900mmx450mmx200mm above ground level duly plastered with 12mm thick 1:4 cement plaster, having a base of size 1050mmx600mmx250mm below ground level. (HSR item No. 31.33(iii)
1
-
-
... More
MS pedestal of size 1200mm wide, 1500mm high and 300mm deep and bottom totally open, duly embedded in cement concree block of size 1350mm x 600mm x 200mm above ground level duly plastered with 12mm thick 1:4 cement plaster, having a base of size 1500mmx750mmx250mm below ground level. (HSR item No. 31.33 (v)
2
-
-
... More
Supply and erection of caution notice plate in three languages (HSR item No. 31.35 (iii)
3
-
-
... More
Supply and erection of aluminum lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work:- (HSR item No. 31.35 (ix) (b). 4sqmm to 6 sqmm
12
-
-
... More
16 Sq mm (HSR item No. 31.35 (ix)(d)
12
-
-
... More
25 Sq mm (HSR item No. (HSR item No. (31.35 (ix)(e)
12
-
-
... More
Size 1.5 sqmm (3.0, 81mm) (HSR item No. 31.40 (i)
20
-
-
... More
25mm dia (HSR item No. 31.44 (b)
674
-
-
... More
PVC pipe (HSR item No. 31.58) 32mm dia
12
-
-
... More
PVC pipe (HSR item No. 31.58) 40mm dia
1432
-
-
... More
Supplying and fixing of copper busbar duly tinned by means of SMC / DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. (HSR item No. 31.63)
12
-
-
... More
Providing and fixing digital metering equipment for LT cubical panel consisting of 96mmx96mm 0-500V, voltmeter with selector switch, Ammeter (of required ratio upto 600/5A) with selector switch and required CTs 3Nos. A set of 3 Nos. phase indication lamps RYB LED. (HSR item No. 31.64)
8.3
-
-
... More
Rotary handle upto 125 A, MCCB (HSR iem No. 31.66(i)
3
-
-
... More
HDPE pipe 63/50mm outer dia/inner dia (HSr item No. 31.67
220
-
-
... More
Four Pole MCCB 6 to 63 amp (HSR item No. 31.69 (iv)
3
-
-
... More
Four Pole MCCB 100 amp (HSR item No. 31.69 (v)
1
-
-
... More
Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 20mm nominal size) in foundation (HSR item No. 10.40)
14.6
-
-
... More
Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels (For Plastering of foundation of Post Top Lantern Pole).(HSR item No. 15.10)
16
-
-
... More
Supply, carriage, erection, testing and commissioning of 20W - 25W LED Post Top Lantern with minimum efficacy of 100 lm/W made out of die cast aluminum base and spun aluminum top fitting with LED PT module, power LEDs mounted directly on extruded Heat sinks. A UV stabilized PC / PMMA diffuser is provided for Glare free lighting with high visual comfort. The job includes making connection to nearest point and all petty material required at site. The work should be completed as per satisfaction of Engineer-in-charge / Architect. Klite make Cat. No. UMBRELLYA 5031 (20W) / Lux Max make Cat. No. LUXMAX-PT-155 (25 watt) or its equivalent Wipro / Philips or of make as approved in the department. (NS)
101
-
-
... More
Supply, carriage, erection of Galvanised Mild Steel Tube Pole 3m high having 140mm dia at bottom and 90mm dia at top with cast aluminium embellishment. The pole should primer coated and painted with polyurethane paint. The pole shall have a service window at the bottom comprising 4way 25A connector terminal and a MCB. The pole has a MS base plate having 4Nos. mounting holes with 4Nos. Anchor Bolts. The pole is to be erected on RCC foundation having anchor bolts grouted including base plate, nuts and bolts and all accessories cement, bajri etc. as per manufactureer design complete with door locking arrangement. The work should be completed as per satisfaction of Engineer-in-charge / Architect. The colour / sample of the pole is to be got approved from Engineer- in-charge / Architect. The pole should be of make Lux Max - Steel Pole cat.No. LuxMax-SP-140-300 or its equivalent K-Lite / Bajaj / Surya make or of make as approved in the department. (NS)
101
-
-
... More
Supply, carriage, erection, testing and commissioning of 8W-9W LED Bollard. The bollard is to be fixed on existing RCC foundation including connection with PVC Cu wire 1.5sqmm from connector box to fitting. (NS)
26
-
-
... More
Supply, Carriage, Installation, Testing and Commissioning of LED Spike Light Made of pressure die cast alum complete in all aspects with all accessories. In IP-65 Housing with toughened glass. The fitting is to be fixed in ground with suitable fixing arrangement and making connection with copper wires to the nearest light point. The work should be completed as per satisfaction of Engineer-in-charge / Architect. k-Lite make Cat. No. TRIOSCAPE - SPIKE 7052 7W LED WW (7W) / Bajaj make Cat. No. SPYKZ 112146 BGSBL SW LED WW (4W) / Lux Max Make
Cat No. LLUXMAX-SPK-6 (6W) or its equivalent Wipro / Philips or of make as approved in the department. (NS)
31
-
-
... More
Supply, carriage, erection, testing and commissioning of LED Step Light. The fitting is to be fixed on existing surface including making connection with PVC Cu wire 1.5sqmm to nearest light point. The work should be completed as per satisfaction of Engineer-in-charge / Architect. K-lite Make Cat. No. 2746 size 130 x 90 x 76 (6W) SUDO/SUDO MINI-GRID FRAME / Bajaj Make Cat.No. RAZOR 111711 BLSGV 4W LED WH / VAK Make VAK-
WR-DIO-STEP-7W / Lux Max Make Cat No. LUXMAX-UL-153 (6W) or of make as approved in the department. (NS)
12
-
-
... More
Supply, carriage, erection, testing and commissioning of LED Hanging Light 30W with reflector. The fitting is to be hanged from the roof of the huts including making connection with PVC Cu wire 1.5sqmm from junction box. The work should be completed as per satisfaction of Engineer-in-charge / Architect. Wipro Make Cat. No. LH13-301-060 57-xx (32W) / VAK Make VAK-IL-HYE P-INDUSS30 30W / Lux Max Make Cat No. LUXMAX-HB-30 (40 WATT ) or
of make as approved in the department. (NS)
16
-
-
... More
Supply, carriage, erection, testing and commissioning of LED under water Light water proof. The fitting is to be fixed in the pond with suitable fixing arrangements including making connection with PVC Cu wires. The work should be completed as per satisfaction of Engineer-in-charge / Architect. VAK Make VAK-UW-MAR1-R12 (12W) or its equivalent Wipro / Philips / K-lite make or of make as approved in the department. (NS)
22
-
-
... More
Supply, carriage, erection, testing and commissioning of LED Strip Light 5W per meter with driver. The fitting is to be fixed in the coves in wall including making connection with PVC Cu wires. The work should be completed as per satisfaction of Engineer-in-charge / Architect. 5W/mtr LED strip light Bajaj Make Cat No. 112499 25W PROFESSIONAL LED STRIP IP65 WW and Driver Cat No. 112516 25W LED Strip Driver IP65 / 5W/mtr LED strip light / VAK Make Cat No.VAK-CV-INL-COVE-I2-5 (5mtr length) IP-65 or of make as approved in the department. (NS)
60
-
-
... More
Daily programmable Digital Time Switch timer 3 Mod (1 C/O) Indo Asian (TL040DB0) with 1 No. 3 phase power contactor MNX 32A - 3P complete in all respect. (NS)
3
-
-
... More
Supply and erection of PVC Copper cables flexible multistrand 1100V grade PVC insulated and PVC sheathed
FRLS as per IS694-1990. The cable is to be laid in existing pipe as per site requirements. The work should be completed to the satisfaction of Engineer-in-charge / Architect. 6 sqmm4C Cu flexible cable (NS)
1615
-
-
... More
6sqmm 3C Cu flexible cable (NS)
15
-
-
... More
4sqmm 3C Cu flexible cable (NS)
55
-
-
... More
2.5sqmm 3C Cu flexible cable (NS)
144
-
-
... More
1.5sqmm 3C Cu flexible cable (NS)
730
-
-
... More
Supply, Carriage and erection of thermoplastic cable junction boxes IP 66/67 “weather proof”, for outdoor installation (with knockouts for cable entry) of various sizes for termination of cables. The box is to be embedded in the Cement Concrete Plateform / on wall / ceiling as per site requirement. The job includes cost of junction box with petty material required to fix the box excluding cost of cement concrete. The work should be completed as per satisfaction of Engineer-in-charge / Architect. (Hensel / Diplast or make similar to Hensel) Junction Box of size 104x104x70mm suitable for 1.5-4sqmm (NS)
16
-
-
... More
Supply and erection of 1.5sqmm 3Core flat Sumersible cable 1100V grade PVC insulated. The cable is to be laid
under water in existing PVC conduit as per site requirements. The work should be completed to the satisfaction of Engineer-in-charge / Architect. (NS)
235
-
-
... More
Earthwork dressed with all lead with minimum lead 1 KM (HSR item No. 5.2 (b) 4.1 (a)
1542.3
-
-
... More
Supplying and stacking at site dump manure, including carriage upto 1.00 KM -Screened through seive of IS designation 20mm (DSR 2.4)
38.55
-
-
... More
Screened through sieve of IS designation 16mm (HSR item No. 2.4)
38.55
-
-
... More
Screened through sieve of IS designation 4.75mm (HSR item No. 2.4)
38.55
-
-
... More
Compansation of earth taken from private land (HSR 6.4)
1542.3
-
-
... More
Supplying and stacking of well decayed cow dung manure at site including royalty and carriage up to 1.0 km (cow dung manure measured in stacks will reduced by 8% for Payment) (DSR 2.25)
115.67
-
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure) (DSR 2.1)
925.38
-
-
... More
Rough dressing the trenched ground including breaking clods (DSR 2.5)
5141
-
-
... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation (DSR 2.6)
5141
-
-
... More
Fine dressing of the ground (DSR 2.7)
5141
-
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge (DSR 2.9)
1773.65
-
-
... More
Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Engineer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately). (DSR 2.8)
1773.65
-
-
... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts (DSR 2.12)
1700
-
-
... More
Digging holes 1.2 diameter and 1.2 m deep (DSR 2.14.1)
1
-
-
... More
Digging holes 90cm diameter and 90 cm deep (DSR 2.14.2)
177
-
-
... More
Digging holes 60cm diameter and 60cm deep (DSR 2.14.3)
1
-
-
... More
Grassing with selection No1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately) with grass turf (DSR 2.10.2)
1184
-
-
... More
Albizzia lebbek (Tree) (DSR 7.5)
7
-
-
... More
Azadiractha indica (Tree) (DSR 7.5)
24
-
-
... More
Bauhinia purpurea (Tree) (DSR 7.8)
11
-
-
... More
cassia fistula (Tree) (DSR 7.16)
8
-
-
... More
Cassia javanica (Tree) (DSR 7.18)
13
-
-
... More
Mangifera indica (Tree) (DSR 7.53)
5
-
-
... More
Mimusops elengi (Tree) (DSR 7.59)
6
-
-
... More
Peltoforum ferrugineum (Tree) (DSR 7.62)
14
-
-
... More
Plumeria rubra (Tree) (DSR 7.72)
33
-
-
... More
Saraca asoka (Tree) (DSR 7.80)
24
-
-
... More
Spathodia campanulata (Tree) (DSR 7.82)
14
-
-
... More
Tabebuia aurea (Tree) (DSR 7.84)
11
-
-
... More
Pomgamia pinnate (Tree) (DSR 7.73)
7
-
-
... More
Acalypha wilkensiana (SHRUBS) (DSR 5.1)
1177
-
-
... More
Clerodendrum inerme (SHRUBS)(DSR 6.6)
474
-
-
... More
Caesalpinia pulcherrima (SHRUBS) (DSR 8.4)
57
-
-
... More
Croton baby golden (SHRUBS) (DSR 3.23)
1422
-
-
... More
Excoecaria bicolour (SHRUBS) (DSR 8.20)
4377
-
-
... More
Ficus panda (SHRUBS) (DSR 8.24)
181
-
-
... More
Gardenia jasminoides (SHRUBS) (DSR 8.28)
361
-
-
... More
Hamelia patens dwarf (SHRUBS) (DSR 8.31)
5422
-
-
... More
Murraya exotica (SHRUBS) (DSR 8.44)
829
-
-
... More
Tabernaemontana coronaria(TMC) (SHRUBS) (DSR 8.56)
968
-
-
... More
Tecoma stans (SHRUBS) (DSR 8.68)
905
-
-
... More
Bauhinia acuminata (SHRUBS) (DSR 8.1)
55
-
-
... More
Hibiscus rasasiensis (SHRUBS) (DSR 8.33)
30
-
-
... More
Jatropha multifida (SHRUBS) (DSR 8.39)
30
-
-
... More
Largestromia indiaca (SHRUBS) (DSR 8.41)
5
-
-
... More
Mussaenda erythrophulla (rosia) (SHRUBS) (DSR 8.46)
12
-
-
... More
Plumbego capensis(SHRUBS) (DSR 8.51)
30
-
-
... More
Cestrum noctumum (Rat ka rani ) (SHRUBS) (DSR 8.13)
30
-
-
... More
Alpinia zrumbet (DSR 6.1)
2700
-
-
... More
Alternanthera red (DSR 6.2)
1966
-
-
... More
Chlorophytum comosum (DSR 6.8)
133
-
-
... More
Cuphea chinensis (DSR 6.10)
3077
-
-
... More
Duranta Golden (DSR 6.12)
5425
-
-
... More
Ophiopogon japonicus (DSR 6.19)
188
-
-
... More
Wadelia trilobata (DSR 6.30)
6111
-
-
... More
Setcreasea purpurea (DSR 6.24)
1455
-
-
... More
Buddha Belly bamboo (DSR 5.8)
188
-
-
... More
Irrigation works for all the area (NS)
1
-
-
... More
Electromechanical works for musical fountain (NS)
1
-
-
... More
Childrens play equipments (NS)
6
-
-
... More
Science park gadget (NS)
1
-
-
... More
Sculpture (NS)
1
-
-
... More
Tensile structure over amphitheatre (NS)
1
-
-
... More
Solar Tree (NS)
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements