Irrigation And Water Resources Department Tender
... More
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 11,64,340Document Cost
₹ 20,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_HRY_122968_1Bid Award Id
ViewTender No
03/2020Tender Authority
Irrigation And Water Resources Department ViewPurchaser Address
-Website
http://https://hid.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing & laying in position machine batcheed and machine mixed design mix M-15 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in foundation and plinth. (Note: Cement content considered in this item @ 240 kg/cum (HSR Item No. 10.64)
772.9
-
-
... More
Cement concrete 1:4:8 with stone aggregate 20mm nominal size in foundation and plinth 150 mm thick (HSR item no. 10.39)
209.42
-
-
... More
Providing & laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelcrate, retard setting of concrete, improve workability withour impairing strength and durability as per direction of Engineer-in-charge in foundation and plinth.(Note: Cement content considered in this item is @ 330kg/cum). (HSR item No. 10.66) A&C Slip No. 30 dated 25.10.2019
796.15
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-2 grade cement Concrete for reinforced cement concrete work, using cement content as per approved design mix, including the cost of centering, shuttering, finishing and reinforement, including admixtures in recommended peoportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in first storey upto 4 meters above plinth level.(Note: Cement content considered in this item is @ 330kg/cum)(HSR item No. 10.73) A&C Slip No. 30 dated 25.10.2019
88.4
-
-
... More
Damp proof course 40 mm thick of cement concrete 1:2 stone aggregate with 2 coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded(HSR item No.10.114) A&C Slip No. 30 dated 25.10.2019
62.76
-
-
... More
Steel reinforcement TMT bars FE-500 E-500 D grade or more for RCC work, where no included in the comlete rate of RCC including straightening, bending, binding, wastage, overlaps, welded joints,spacer bars, chairs, stayas hangers and annealed steel wire etc. and placing in position compete in all respects for all heights/depths/storeys/basements etc.(Note: Rwinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage,overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to included in the rates for reinforcement. (HSR item No. 18.22) A&C Slip No. 29 dated 25.10.2019
480.51
-
-
... More
Centering and shuttering including shuttering, propping etc. and removal of form for foundation, for faces of concrete foundation and foundation beams (verical or battering) (HSR item No. 9.13) (a)
1366.89
-
-
... More
Centring and shuttering for side and soffits of beams hunchings, girders, bressumers and lintels (HSR item No. 9.7) (c)
631.44
-
-
... More
Centring and shuttering for columns (square or rectangular or polygonal in plan) (HSR item No. 9.9) (d)
750.24
-
-
... More
First clas brick work laid in cement, stone dust (from crusher) mortar 1:6 in foundation and plinth (HSR item No. 11.22)
788.86
-
-
... More
First class brick work laid in cement cement, stone dust (from srusher) mortar 1:6 in first storey upto 4 Mtr above plinth level (HSR item No. 11.27)
113.53
-
-
... More
Extra for brick work in arches including cost of shuttering more than 3 meters, but upto 6 meters span, Add plaster on Jambs of Opening (HSR item No.11.44(c)
114.45
-
-
... More
11.43 cm thick brick wall with every, fourth course, reinforeced with hoop-iron, laid in 1:4 cement sand mortar in super structure (HSR tiem No.11.46)
101.41
-
-
... More
First Class brick work laid in cement sand mortar 1 : 6 in foundation and plinth (HSR item No. 11.2)
102.56
-
-
... More
Laying Dry Brick ballast ( HSR item No.10.117 )
1893.51
-
-
... More
First class Brick work laid in cement sand mortar 1:6 in 1st storey (HSR item No.11.7)
139.64
-
-
... More
Providing and laying in position approved quality heat reducing eco tiles of 300*300*10 mm over RCC roof on a base of 50 mm thick cemtn concrete 1:5:10 folloed by 12 mm thick. Cement mortar 1:4 with continuous regular straight grooves both ways 3 mm wide and 2 mm deep to be filled with epoxy grout of similar shade make: Pavit or Johnson.(NS)
285.6
-
-
... More
Corugated G.I. sheets roofing 0.80 mm thick fixed with glavanised iron'J' or 'L' Hooks,10 mm dia G.I Limpet and bitumen washers complete, excluding the cost of purlins, rafters and trusses.(HSR item No. 13.18)
52.69
-
-
... More
G.I. sheet gutter ,0.80 mm thick 45 cm over all semi circular, including fixing with clamps and making connections with rain water pipes.(HSR item No.13.24)
51.66
-
-
... More
Providing and embedding 100 mm dia H.C.L rain water without ears I.S.I mark pipe in cement mortar during masonry work.(HSR item No.13.43)
19.7
-
-
... More
Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2(HSR item No.13.47)
6
-
-
... More
Providing and fixing C.I. Plains bends in position with gutter etc. for 10 mm dia pipe(HSR item No.13.49(a)
6
-
-
... More
Top Khurra 0.6 m*0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR item No.13.50)
5
-
-
... More
Providing & laying four courses of water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown type bitumen grade 85/25 applied hot at 1.20kg/sqm of area of each course, second course on roofing felt type 3 grade-1 (Hessian base self finished bitument felt) and fourth and final course of stone grit spread at 0.006 cum per sqm including preperation of surface complete.(HSR item No.13.61)
431
-
-
... More
Cement concrete 1:2:4 gola 10cm*10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified.(HSR item No.13.64)
75.84
-
-
... More
Providing and fixing false Ceiling with 12 mm thick Gypsum Board fixed on M.S. Steel runner frame i.e. cost of screws angles, cleats, rawel plugs, with taping, filling with Gypsum compound and applying priming coat etc. complete with all respect.(HSR item No.13.91)
40.5
-
-
... More
Providing and fixing false ceiling without grooves with 12mm to 15 mmt thick,600 mm*600mm best quality mineral fiber tiles of approved make fixed on M.S. Steel runner frame i/c cost of screws angles,cleats, rawel plugs, with tapping and painting etc. complete in all respets as approved by the Engineer-in-charge.(HSR item No.13.92)
69.87
-
-
... More
Bottom Khurra on around (HSR item No.13.57)
9
-
-
... More
Wrought iron and mild steel (using angles and,flats, bars , tees and channels ) ladders grills , gratting frames, window guard, iron Door openable or parapet or any other type of railing, gates and tree guards, etc., including cost of screws and welding rods or bolts and nuts complete fixed in position.(HSR item No. 18.12)
78.46
-
-
... More
Supplying and fixing rolling shutters, of approved make, M.S. Laths,interlocked together, at the end, by end locks mounted on specially designed pipe shaft,with brackets,side guides,27.5cm long wire spring grade no.2, and arrangement for inside and outside locking, with push and pull operation complete, including to cover 0.80 mm thick ( payment is to be made for the exact size of opening where rolling shutter is to be fixed) with 0.80mmx1.25mm M.S Laths(HSR item No.18.18 (b)
20.52
-
-
... More
Extra for providing Mechanical device, chain and crank operation for operating rolling shutters, exceeding 11.20 sqm in areas of the rolling shutters.(HSR item No.18.19)
20.52
-
-
... More
Decorative neneering with vertical grains or cross bands and face veneer on both sides teak facing and edges lipped with commercial hard wood with laminated core-35 mm thick(HSR item No.17.93) (c) (iii)
18.29
-
-
... More
Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling(HSR item No.14.1)
522.09
-
-
... More
Conglomerate floor 25 mm thick cement concrete topping 1:2:4 (HSR item No.14.8)
149.74
-
-
... More
Providing and fixing vitrified tiles 600*600 mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coares sand mortar 1:3 and jointed with white cement slurry mixed with pigmetn to match shades to tiles.Note:- Tiles shall be of premium quality NITCO, KAJARIA, SOMANY, ORIENT, SIMPOLO.(HSR item No.14.89)
336.41
-
-
... More
Providing and fixing vitrified tiles 600x300 mm of approved make in skirting/dados laid in any pattern as specified over vase of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shades to tiles.Tiles shall be of premium quality NITCO, KAJARIA, SOMANY, ORIENT, SIMPOLO.(HSR item No.14.90)
147.11
-
-
... More
Providing, laying and fixing granite stone in all shades 15 mm to 18 m thick in flooring and skirting stairs(treads and risers) laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone including the cost of grinding and diamont cut polishing to the satisfaction of the Architect.(HSR item No.14.96)
120.15
-
-
... More
Providing and fixing vitrified tiles of size 196mmx120mm in two colour natural rock or wood finish of approved make in flooring laid n any pattern as specified over base 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shades to tiles..Note:- Tiles shall be of premium quality NITCO, KAJARIA, SOMANY, ORIENT, SIMPOLO.(HSR item No.14.93)
258.37
-
-
... More
Providing and fixing Glass Reinforced Concrete GRC Panels in approved Size, Pattern. Design, Thickness and Colour of M/s Unistone Make of Equivalent . The Panels Should be made from 53 Grade White Protlant Cement manufactured by JK Cement or Equivalent , Quarts, Fine Silica Sand, Alkali Resistant Glass Fiber Manufactured by 'Neg' or Equivalent, Super Plasticizers Manfactured by'Basf' or Equivalent, Polymers Manufactured by 'Basf' or Equivalent and U.V. Resistant Synthetic inorganic Pigments Should be used for Pigmentation Manufactured by 'Bayferrox' (Germany) or Equivalent. The material Casting should take place in synthetic Rubber/FRP Mold Manufactured by 'Reckli' or Equivalent.The fixing of Screen should be 'Dry fixing' i.e. to be done with stainless Steel (SS-304) 'L' shapped brackets, fastners and pins including M.S frame including if required at site (Warranty of A minimum of 2 years) (NS)
40.25
-
-
... More
Providing and fixing 18mm thick gang saw cut, miror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4( 1 Cement : 4 sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade Area of slab upto 0.50 sqm..(DSR item No.8.2.2.1) A&C Slip No. 31 dated 11.11.2019
990.87
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement of mortar 1:4 ( 1 cement :4 coars sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge; Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat eye or equivalent.(DSR item No.11.55.1) A&C slip No. 31 dated 11.11.2019
291.9
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick (HSR item no.14.62)
2056.06
-
-
... More
Providing and laying epoxy grevel in tiles (N.S.)
317.39
-
-
... More
Providing and laying Glass mossaic tiles at finished plain wall surface of ssize 20mmx20mmx4mm in all colour, design, fixing in customize design as per direction of Engineer-in-charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-charge(DSR item No.11.53) A&C Slip No. 31 dated 11.11.2019
1003.86
-
-
... More
12 mm thick cement plaster 1:5 on under sides of ceilings.HSR item No.15.6)
668.1
-
-
... More
18 mm cement plaster in 2 coats under layer 12 mm thick cement plaster 1:5 ( 1 cement: 5 coars sand) and top layer 6 mm thick with cement mortar 1:3( 1 cement:3 coars sand) finished rough with sponge.(HSR item No.15.20)
653.3
-
-
... More
10 mm thick cement plaster 1:4 on under sides of ceilings.(HSR item No.15.52)
524.87
-
-
... More
Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required fi
653.3
-
-
... More
Painting two coats of weather Shield exterior acrylic paint in all shades on newly plastered or concrete surface of walls. Make: Asian, Dulux, Nerolac-First Quality (HSR item No. 16.79 (b)
653.3
-
-
... More
Preperation for plastered surface for water bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish complete (HSR item No. 16.52)
1123.54
-
-
... More
Distempering with washable water bound distemper (of approved manufacture) two coats over one priming coat on new work. Make: Asian, Dulux, Nerolac. (HSR item No. 16.58)
1123.54
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall 1:6 ( 1 Cement:6 coarss sand) (HSR item No.15.12)
269.76
-
-
... More
Finishing wall with textured exterior paint of required shade applying primer 2nd class and painting 1st classs 2 coat(HSR item No.16.25 and 16.26)
1922.16
-
-
... More
Synthetic enamel paint applying primer and painting two coats steel walls(HSR item No.16.102 and 16.17)
259.74
-
-
... More
Washed stone grit plaster on exterior walls of height upto 10 metre above ground level, in two layers, under layer 12mm cement plaster 1:4 (1cement: 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer with scratching tool, applying cement slurry on the under layer @2kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement :1/2 coars sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern, including scrubbing and washing the top layer wiht brushes and water to expose the stone chippings,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately)(DSR item NO.13.72) A&C slip No. 31 dated 11.11.2019
822
-
-
... More
Preparation of sub grade including trenching, rough dressing of spoil, final dressing of earth ,to given levels and camber , watering , rolling with road roller , and compaction the bed. (HSR item No. 24.1)
2880
-
-
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstices of coars aggregate, watering and compacting to the required dansity(DSR item No.16.4) A&C Slip No. 31 dated 11.11.2019
720
-
-
... More
Cement concrete with stone aggregate all complete as per specification in HSR Pre cast cement concrete 1:2:4 stone aggregate 20mm nominal size in Kerbs in the like items finished smooth with 6mm thick cement plaster 1:3 on exposed surface including formwork, placing & fixing in position, complete at the ground level or in first storey.(HSR item No.10.77)
205.97
-
-
... More
Providing and laying 500mmx500mmx40 mm thick Turf paver(Turf pave XD) on 150 mm thick sub grade of compacted bed of 20mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand including spreading, well remming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge(DSR item No.11.45) A&C Slip No. 31 dated 11.11.2019
450
-
-
... More
Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20 mm thic base mortar 1:4 ( 1 cement:4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc.complete as per direction of engineer-in-charge.(DSR item No.16.92) A&C Slip No. 31 dated 11.11.2019
306
-
-
... More
Providing & laying 60mm thick interlocking paver blocks of all shape in colors in design mix M-35 over a bed of 25mm thick fine sand complete in all respect. (HSR item No. 10.158)
4733.3
-
-
... More
Supplying, filling, spreading and levelling stone boulders of size range 5 cm to 20 cm in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge.(HSR item No.28.50 e)
73.5
-
-
... More
Supplying, filling, spreading and levelling stone boulders of size range 5 mm to 10 mm in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge.(HSR item No.28.50 c)
73.5
-
-
... More
Supplying, filling, spreading and levelling stone boulders of size range 1.5 mm to 2 mm in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge.(HSR item No.28.50 b)
73.5
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge. (HSR item No. 28.50 (d)
73.5
-
-
... More
( 3 parts of integral crystalline slurry: 1 part water) for horizontal surfaces and applyig the same from negative (internal) side with the help of synthetic fiver brush. The meterial shall meet the requirements as specifiec in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90% compared with control concrete by as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The produced performance sall carry guaranteed for 10 years against any leakage.(a) for vertical surface two coats@0.70kg per sqm per coat (DSR item No.22.23.1) A&C slip No. 31 dated 11.11.2019
192.68
-
-
... More
( 3 parts of integral crystalline slurry: 1 part water) for horizontal surfaces and applyig the same from negative (internal) side with the help of synthetic fiver brush. The meterial shall meet the requirements as specifiec in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90% compared with control concrete by as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The produced performance sall carry guaranteed for 10 years against any leakage.(a) for horizontal surface one coats@1.10kg per sqm per coat (DSR item No.22.23.2) A&C Slip No. 31 dated 11.11.2019
467.45
-
-
... More
Providing and laying pressed clay tiles (as per approved pattern 20mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement :4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20mm thick cement mortar :4 ( 1 Cement:4 coarse sand) and finished neat complete.(DSR item NO.12.20) A&C Slip No. 31 dated 11.11.2019
26.52
-
-
... More
Dismantling stone masonary rubble sotne masonary in cement(HSR item No.8.1(d)
72
-
-
... More
Dismantling Brick Work or Tile Lining and Tile terracing in Cement ( HSR item No.8.5)
645.6
-
-
... More
Dismantling Concrete cemtn concrete 1:2:4 (HSR item No.8.6)
14.4
-
-
... More
Disposal of buiding rubbish/malba/similar unserviceable, dismantled or waste material by menchinical means, include loading, transporting, unloading to approved municipal dumping ground or as approve by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved (DSR 15.60) A&C slip No. 31 dated 11.11.2019
732
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and parttions with extruded buit up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285 fixed with rawl plugs and screw or with fixing clips or with expansion hold fasteners including necessary flling up of gaps at junctions, at top, bottom and sides with required neoprene felt. etc. aluminimum sections shall be smoothh, rust free, straight mitred and jointed machanically wherever required including cleat angle. Aluminimium snap beading for glazing/pancilling C.P. brass/stainless steel screws all complete. Fixed portion (Anodised aluminimum transparent or tyed to required shade according to IS:1868, minimum anodic coating of grade AC15 for food court toilet at the Rat 7 kg/SQm(HSR item No.17.95)
10.08
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and parttions with extruded buit up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285 fixed with rawl plugs and screw or with fixing clips or with expansion hold fasteners including necessary flling up of gaps at junctions, at top, bottom and sides with required neoprene felt. etc. aluminimum sections shall be smoothh, rust free, straight mitred and jointed machanically wherever required including cleat angle. Aluminimium snap beading for glazing/pancilling C.P. brass/stainless steel screws all complete. Shutter of doors, window and Ventilators including providing and fixing hinge/pivotsand, making provision for fixing of fittings wherever required inlcuding the Cost of PVC?Neoprene gasket required including aluminium fittings and aluminium grills etc. for food court (HSR item No.17.96)
17.6
-
-
... More
Note(ii) extra if powder coating of 50 microns in done instead of anodising for food court toilet(HSR item No.17.95&17.96)
27.68
-
-
... More
Providing and fixing glazing in aluminium door windows, ventilator shutter and partitions etc. with PVC/neoprene gasket etc. complete (cost of aliminium snap beading shall be paid in basic items). (HSR item No. 17.98 (b)
1.1
-
-
... More
Providing fixing aluminium round shape handle of outer dia 100mm with screws etc. Complete.(HSR item No. 17.102 (iii)
2
-
-
... More
Providing fixing 150 mm floor brass door stopper, with rubber cushion, screws, etc to suit sutter thickness complete.For food court toilet (HSR item No.17.75)
2
-
-
... More
Supplying and fixing hydraulic door closer I.S.I mark, with necessary screws, etc. Complete ISI designation No. III (size of door 851mm to 100mm) (HSR item No. 17.82 (c)
2
-
-
... More
Providing & fixing in position 38 mm thick granite stone frames (2 strips) for door/ window/ ventilators 150 mm wide with 35 - 40mm rebate (for fixing the shutters etc.). the frames to be manufactured, hard pressed jointed properly in alighnment two pieces of granite stone 15 & 110 mm wide and 19 mm thick complete as per drawings and directions of the architect. The frames will include the cost of all related material and all labour what so ever. Also including, grinding, jointing & polishing etc. (basic rate of granite RS1500/sqm) including diamond cut polishing in all storey, height, levels and locations complete the cost of material and labour all holdfasts, necessary nuts/bolts and screws etc. will also be included in the rate.(NS)
49.58
-
-
... More
Providing & Fixing U.P.V.C Glazings with 6 mm toughened glass(8 mm toghened in lager openings) and white colour outer profile including all hardware, fittings, complete in all respect as/drgs and vendors manual. Samples to be got approved from the architect. Make-Lingel, Fenesta, Rehau(NS)
74.22
-
-
... More
Providing and Fixing Toilet cubical ( of following standard Dimensions Which includes 600mm Door Size) made of Heat, Bacteria, Water, Chemical,Scratch, Impact and Anti Bacterial Resistant 12mm thick Solid Compact Laminate Panelstested by Shriram Test House. Finish of the Compact Laminate Should Includes Doors, Pilasters& intermidiate Panels Finished with approved Texture/Shade as per the Detail Drawings and As per IS2046( Indian Standard) and as per fire Retardent BS-476/97 Standard. The Product should have green guard Certificate. This also includes providings and fixing in position necessary Hardware made out Stainless steel(Grade 304) as per manufactured specifications and architects insturctions like(1) Door knob(2) Gravity Hinged(3) Thumb Turn locket with occupany indicators (4) Coat hooks with door stooper(5) U-channels,(6) Adjustable foot/Pedestal,(7) top rail with corner connector(8) Ruber noise deafening tape(9) screws and wall plugs. Warranty of A minimum of 2 years) Toilet Cubicle with standard Dimension of 2025mm heightx 1000mm Widthx1550 Depth, which includes 600 mm doors size Width) Toilet CubicleI-shpe(front Partition) with standard Dimension of 2025mm Height x1000 mm widthx 600 mm doors size width) Make Greenlam, Marino,(cubical in WC)(NS)
8
-
-
... More
Shower Area Front Panel with door (Specification as per item No. 85) (NS)
6
-
-
... More
Lowering salt glazed stone pipes and specials two trenches for all depths and laying out the same to correct alignment gradient, level etc. In trenches including all dressing and trimming of bed and sides of trenches, if required trimming and cutting of concrete beds and joints holes, supporting the pipes and specials, in correct position in a suitabel rigid manner while the same are being jointed and until the surrounding benching, hauching and envelopes are completed. The sewer shall rest on a bed at every point throughout its length and to ensure this, it shall be grouted in without extra charge by the Contractor with lime surkhi mortar, in the case of lime concrete beds and 1:3 cement sand mortar in case of cement concrete bed including cartage from divisional store or neares Railwat Station to site of work. the Internal diameter of sewer being 2000mm (HSR item No.29.38)
100
-
-
... More
jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemo/yarn including finishing and trowelling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes watering, keeping the joints covered and wetted till the same are cured, testing the sewer line for leakage and making all leakages and defects good, complete as laid down in the contract specificaitons. The internal diameter of sewer or branch pipe being 200mm (HSR item NO.29.39 (D)
140
-
-
... More
Construction of rectangular standard brick masonry manhole chambers to standard drawing on new. Egg-shaped sewers upto the required depth n 1:5 cement sand mortar, lime concrete 40 percent lime mortar with 19-20mm guage brick ballast in haunches above the arch ring where the depth of cover in traffic streets is less the 1.5 mts, 12mm thick water tight 1:2 cement sand plaster with a floating coat of neat cement and finishing with reinforced cement concrete slab 180mm thick fixing 560 mm internal diameter C.I. manhole frame and cover weight not less then 2.5 QTL painted with three coat of black bitumen paint, fixing galvanised malleable iron stets embedded in 1:2 cement sand mortar etc. complete. the rate also covers the cost of M.S. steel of RCC slab labour for fixing the carriage of C.I. manhole frame and cover the malleable iron steps from the stores of the Engineer-in-charge of the works to site of works. the rate further includes the cost of accurately planned and fitted centering, supports for all works as well as for all urves and special worls cleanining out their beds etc. Sodium silicate shall be on egg-shaped sewer of size 610mmx915mm to 860 mm x1290 mm for 2.40 mts depth below grount level (HSR item No.29.89)
16
-
-
... More
Providing and fixing in position best Indian make(to the approval of the Engineer-in-charge). Indian type orissa or orya watercloset suite of sinking into floor, with raised foot treads complete with 100 mm H.C.I. 'P' trap with or without vent as required. 12½ litres eapacity masquito proof cast iron flushing eistern best indian make I.S.I. marked nomos or other (as approved by the Engineer-in-charge) painted with non-yellowing white or other approved shade enamel paint on outside and black bitumastic superior paint of approved manufacture on inside complete with all accessoies such as 20 mm G.I over flow pipe with specials & clamps upto 15 cm above floor level of W.C. room, and brass perforated mosquito proof cap, 32 mm oulet, 15 mm I.S.I. marked ballcock, G.I. pull and chain R.S. or C.I. painted brackets and mosquito proof couplings for outlet and overflow pipes, etc. 32 mm diameter telescopic 1.25 mm thick galvanized iside and outside steel flush pipe with clips.(a) Size 580 mm (i) White HSR item No. 30.2)
2
-
-
... More
Providing and fixing in position best Indian make (as approved by the Engineer-in-charge) European type water closer suite, syphonic type consisting of-(i) Vitreous chinaware syphonic suite with 15 litres capacity matching chinaware cisten and all internal brass fittings complete with 'P' or 'S' trap with or without vent (as approved by the Engineer-in-charge) (ii) One piece seat and lid in hollow black or white plastic fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge). Complete in all respects including cutting and making good the walls and floors. (a) Single trap syphonic W.C. Suite. (i) White (HSR item no. 30.5)
4
-
-
... More
Providing & Fixing Jaquar make dual flush( 3/6 LPF) I- Flush for EWC wutg concealed body of Size 32 mm with inbuilt control cock including exposed put with dual flush push butten.(NS)
6
-
-
... More
Providing and fixing in position best Indian make Suatting urinals consisting of-(I) Squatting plate urinals 375mm*315mm*620mm (URS-WHT-132530, Jaquar make ) in viterous chinaware,( as approved by the Engineer-in-charge-) (NS)
4
-
-
... More
Providing & fixing CP Brass Jaquar make(PRS-073) Flushing valve for urinals with auto closing function size 15mm (NS)
4
-
-
... More
Curved shaped urinal partition with frosted glass 8 mm thick size 900x400 mm for swimming pool toilet & reception block(NS)
2
-
-
... More
Providing and fixing in position best indian make viterous chinaware sinks including all fittings. Counter top Basin size 600x400x175mm Jaquar make including 32 mm dia. C.P. Brass bottle trap (SLS-WHT-6601-Jaquar) and uion 32 mm dia CP brass pipes to wall flange. Complete including cutting and making good the walls wherever required.(NS)
7
-
-
... More
Providing and fixed push button soap dispensor SDR-WHT-DJ0010F of capacity. 8L of ABS material whilte/smoked finish Jaquar make (NS)
8
-
-
... More
Providing & fixing Pressmatic wall mounted basin Tap( Auto closing) with wall Falange ( Square) Jaquar PRS-061(NS)
7
-
-
... More
Providing & fixing single lever sink mixer with swinging spout on upper side wall mounted with connecting legs and wall flanges Jaquar Model-VGP_81165 (NS)
1
-
-
... More
Providing & fixing in position best indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. of chromium plated brass screws or clamps as directed by Engineer-in-charge.600x400(HSR item No.30.71(a)(i)
12
-
-
... More
Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge) bib cock long body(HSR item No.30.75(a)
7
-
-
... More
Providing and fixing in position C.P. Brass stop cocks ( aw required by the Engineer-in-charge) 15mm stop cocks stop cocks male and female(HSR item no.30.76 (a) (i)
9
-
-
... More
Providing and fixing hand Shower ( Health Fauced -Jaquare ALD-CHR-585) with 88 mm dia, 1 m long PVC tube and wall hook.(NS)
6
-
-
... More
Providing and fixing overhead round shape shower 300mm dia single flow body & face pale in ss with chrome finish and rubit cleaning system in Changing rooms Make Jaquar OHS-CHR-1633 for swimming pool toilet block.(NS)
6
-
-
... More
Providing and fixing in position HCl soil waste vent or antisyphonage pipes to ISI specification of ELC manufacture or of any other reputed firm including cutting and wastage etc and cutting hoes in walls, roofs or floor etc. And making good to its original condition but excluding condition but excluding cost of lead joining 100 mm internal diameter.(HSR item No.30.84(a)
70
-
-
... More
Providing and fixing in position HCl soil waste vent or antisyphonage pipes to ISI specification of ELC manufacture or of any other reputed firm including cutting and wastage etc and cutting hoes in walls, roofs or floor etc. And making good to its original condition but excluding cost of lead jointing with interanl diameter 75mm.(HSR item No.30.84(b)
40
-
-
... More
Providing lead caulked joints to HCI pipes and specials conforming to ISI specifications to ELC manufacture or any other reputed firm including the cost of lead yarn, fuel and tools etc. 100 mm internal diametet ( 1.13 K.G.)(HSR item No. 30.87(a)
70
-
-
... More
Providing and fixing Of HCL floor traps I.S.I. marked of the self cleaning design with C.P. brass hinged grating withframe with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors etc. minimum depth of water should be 150 mm with minimum seal of 50mm with 75 mm i/d outlet.(HSR item No.30.89 B)
10
-
-
... More
Providing and fixing in position automatic brass bal valves in tanks with copper ball 15 mm internal diameter (HSR item No.30.110(a) (i)
5
-
-
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with HCI grating 150mmx150mm cast iron cover weighing approximately 7.26kg and frame clear opening 300mmx300mm and outside size 330mmx330mm and chamber including cost of all brickwork in cement mortar 1:5 cement concrete 1:8:16 in foundations and cement concrete 1:2:4 in coping around C.I. cover and frame etc with three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per stadard design, minimum depth of water should be 150 mm with a minimum seal 50mm 100 mm internal diameter S.W. gully trap (HSR item No.30.114(a)
20
-
-
... More
HDPE water storage tank of Sintax, Diplast, OK, Supreme make with covers with lids marked with IS: 12701 on roof top of buildings including the the cost of hoisting and placing in position, making connection with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge (Except civil work) 700 Ltr. Capacity (HSR item No. 30.119)
5
-
-
... More
Supply and fixing of GI pipe of following size of Jindal/Tata mobile 'B' class including all fixture and all other works contengent thereto(a) 20mm dia( HSR item No.30.120 )
100
-
-
... More
Supply and fixing of GI pipe of following size of Jindal/Tata mobile 'B' class including all fixture and all other works contengent thereto(b) 15mm dia( HSR item No.30.120)
60
-
-
... More
Providing and fixing 2 leaf sliding sensor glass doors for 2.00 m wide opening and height 2.15m including all fittings of reputed make Dorma, Ozone, Haffele or equivalent with a guarantee of 5 years from the company for aquarium block (NS)
1
-
-
... More
Supply and erection of miniature circuit breaker/isolator 240/415 in the existing distribution board including making necessary connection(a) Miniature Ciruit Breaker of 9K.A. breaking capacity single pole(ii) 6 amp to 32 amp (SP) Havelli's /Standard(HSR item No.31.17(a) (ii)
109
-
-
... More
Supply and erection of miniature circuit breaker/isolator 240/415 in the existing distribution board including making necessary connection(a) Miniature Ciruit Breaker of 9K.A. breaking capacity single pole(ii) 6 amp to 32 amp (SPN) Havelli's /Standard(HSR item No.31.17(a) (ii)
6
-
-
... More
Supply and erection of miniature circuit breaker/isolator 240/415 in the existing distribution board including making necessary connection(a) Miniature Ciruit Breaker of 9K.A. breaking capacity single pole(ii) 32 amp TPN Havelli's /Standard(HSR item No.31.17(a) (ii)
1
-
-
... More
Supply and erection of miniature circuit breaker/isolator 240/415 in the existing distribution board including making necessary connection(a) Miniature Ciruit Breaker of 9K.A. breaking capacity single pole(ii) 40 amp to 63 amp TPN Havelli's /Standard(63A)(HSR item No.31.17 (a) (iii)
9
-
-
... More
Supply and erection of fitting and Accessories(xi) Bakelite angle/straight button holder large size (HSR item No.31.18(xi)
4
-
-
... More
Supply and erection of fitting and Accessories(xvii) Ceiling Rose flush/ Surface type(HSR item No.31.18(xvii)
10
-
-
... More
Supply and erection of fitting and Accessories(xviii) Bakelite sheet with 3mm thick earthing (HSR item No.31.18(xviii)
3200
-
-
... More
Earthing with G.I. earth pipe 4.5m long and 40 mm dia with masonry enclosures on the top etc. as required( HSR item No.31.22)(i)
44
-
-
... More
Extra for using salt and charcoal/coke for pipe earth electrode as required(HSR item no.31.22)(ii)
44
-
-
... More
Earthing with GI earth plate 600mmx600mm x6mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required( HSR item no.31.22)(iii)
4
-
-
... More
Extra for charcaol or coke and salt for G.I. plate or copper plate earth electrode ( HSR item NO.31.22)(v)
4
-
-
... More
Pdg and fixing earth connection from earth electrode with 4 mm dia GI wire in 15mm dia GI pipe from earth electrode as required(HSR item No.31.22)(xii)
151
-
-
... More
Pdg and fixing 25mmx5mm GI strip on surface on in recess for connection etc. as required with all labour and material.(HSR item No.31.22)(xv)
24
-
-
... More
Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections (iii) 6 sq mm 2 core cable( HSR item No.31.26)(iii)
15
-
-
... More
Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections (xxvi) 35 sq mm 3.5 core cable( HSR item No.31.26)
70
-
-
... More
Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections (xxvii) 50 sq mm 3.5 core cable( HSR item No.31.26)
80
-
-
... More
Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections (xxxviii) 6 sq mm 4 core cable( HSR item No.31.26)
2021
-
-
... More
Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections (xxxix) 10 sq mm 4 core cable( HSR item No.31.26)
620
-
-
... More
Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections (XL) 16 sq mm 4 core cable( HSR item No.31.26)
340
-
-
... More
Supply and eraction of suitable compression type brass cable glands for underground Cable: Upto 6 sqmm cable 2 to 4 core (HSR 31.28 (i)
214
-
-
... More
Supply and eraction of suitable compression type brass cable glands for underground Cable: 10 sqmm to16 sqmm cable 2 to 4 core (HSR 31.28 (ii)
44
-
-
... More
Supply and eraction of suitable compression type brass cable glands for underground Cable: 25 sqmm to 50 sqmm cable 2 to 4 core (HSR 31.28 (iii)
4
-
-
... More
Ms pedestal of size 750 mm wide 1200 mm high and 300mm deep and bottom totally open, duly embedded in cement concrete block of size 900mmx450mmx200mm above ground level duly plastered with 12mm thik 1:4 cement plaster having a base of size 1050mmx600mmx250mm below ground level( HSR item No.31.33) (iii)
1
-
-
... More
Ms pedestal of size 900 mm wide 1500 mm high and 450 mm deep and bottom totally open, duly embedded in cement concrete block of size 1050mmx600mmx200mm above ground level duly plastered with 12mm thik 1:4 cement plaster having a base of size 1200mmx750mmx250 mm below level (HSR item No.31.33)(iv)
1
-
-
... More
MS pedestal of size 1200mm wide,1500mm high and 300mm deep and buttom totally oepn, duly embedded in cement concree block of size 1350mmx600mmx200mm above goung level duly plastered with 12mm thick 1:4 cement plaster , having a base of size 1500mmx750mmx250mm below ground level (HSR item No.31.33) (v)
3
-
-
... More
Supply and erection of caution notice plate in three language(HSR item No.31.35)(iii)
11
-
-
... More
Supply and erection of aluminum lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work (b) 4 Sq mm to 6 Sq mm (HSR item No.31.35) (ix) (d)
852
-
-
... More
Supply and erection of aluminum lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work ©10 Sq mm (HSR item No.31.35) (ix(c)
128
-
-
... More
Supply and erection of aluminum lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work -16 Sq mm (HSR item No.31.35) (ix) (d)
42
-
-
... More
Supply and erection of aluminum lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work (f)35 Sq mm (HSR item No.31.35)(ix(f)
6
-
-
... More
Supply and erection of aluminum lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work e,25 Sq mm (HSR item No.31.35(ix)(e)
2
-
-
... More
Supply and erection of aluminum lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work (g)50 Sq mm (HSR item No.31.35(ix(g)
6
-
-
... More
Supply and erection of PVC unsheathe d copper conductor cable single core 1100V grade in pipe of suitable size excluding cost and erection of pipe.(EON/Finolex/Havilli's /RR cables make only) Size 1.5 sqmm (3/0.81mm) (HSR item No.31.40(i)
4357
-
-
... More
Supply and erection of PVC unsheathe d copper conductor cable single core 1100V grade in pipe of suitable size excluding cost and erection of pipe.(EON/Finolex/Havilli's /RR cables make only) Size 2.5 sqmm (3/1.05mm) (HSR item No.31.40(ii))
50
-
-
... More
Supply and erection of PVC unsheathe d copper conductor cable single core 1100V grade in pipe of suitable size excluding cost and erection of pipe.(EON/Finolex/Havilli's /RR cables make only) Size 4.0 sqmm (7/0.85mm)(for AC Point) (HSR item No.31.40)(iii)
490
-
-
... More
Supply and erection of PVC unsheathe d copper conductor cable single core 1100V grade in pipe of suitable size excluding cost and erection of pipe.(EON/Finolex/Havilli's /RR cables make only) Size 10.0 sqmm (7/1.35mm) (HSR item No.31.40)(v)
8
-
-
... More
Supply and erection of PVC unsheathe d copper conductor cable single core 1100V grade in pipe of suitable size excluding cost and erection of pipe.(EON/Finolex/Havilli's /RR cables make only) Size 16.0 sqmm (7/1.70mm) (HSR item No.31.40)(vi)
12
-
-
... More
Supply and erection of double door sheet enclosure distribution board suitable for MCB and ELCB etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work 8 way SP &N (Horizontal) HSR item No.31.41 (II)
1
-
-
... More
4 ways ,TPN (Horizontal (8+12) HSR item No 31.41 (V)
4
-
-
... More
8 ways,TPN (Horizontal (8+24) HSR item No 31.41 (vi)
2
-
-
... More
Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.HSR item No.31.44 (a) 20mm dia.
600
-
-
... More
Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.HSR item No. 31.44 (b) 25mm dia.
852
-
-
... More
Supply and erection of MS box made of 16 G MS sheet recessed in wall, with arrangement of fixing brass screws, 2 nos. check nuts and one No. PVC bush of required size including all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work (HSR item No. 31.49 (i) with 2 coats of primer
3000
-
-
... More
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect (HSR item No. 31.56-10Amp 1way switch
2
-
-
... More
10Amp Socket (HSR item No. 31.56)
3
-
-
... More
20Amp switch (HSR item No. 31.56)
2
-
-
... More
16Amp socket (HSR item No. 31.56)
2
-
-
... More
Blanking plate (HSR item No 31.56)
15
-
-
... More
Fan Regulator (HSR item No. 31.56)
14
-
-
... More
Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face palte with all labour and material required for the job complete in all respect (HSR item No. 31.57)-1 & 2 module (Wall fan & telephone)
3
-
-
... More
6 Module (HSR item No. 31.57)
2
-
-
... More
Supply and erection of PVC pipe ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work (HSR item No. 31.58)-PVC pipe of 32mm dia
180
-
-
... More
PVC pipe of 40mm dia (HSR item No. 31.58)
6
-
-
... More
Supply installation testing and commissioning of wall/free standing floor mounting dust and vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet, required hardware 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coats of zinc/red oxide primer primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with interlocking arrangement for equipment/switch wear. Transparent acrylic sheet shall ben provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3mm thick for separately cable alley to BBC from switch chamber extended solid copper bars upto cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection (only outer area on all sides shall be measured (HSR item No. 31.63)
8.6
-
-
... More
Supplying and fixing of copper busbar duly tinned by means of SMC / DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. (HSR item No. 31.64)
8.3
-
-
... More
Providing and fixing digital metering equipment for LT cubical panel consisting of 96mmx96mm 0-500V, voltmeter with selector switch, Ammeter (of required ratio upto 600/5A) with selector switch and required CTs 3Nos. A set of 3 Nos. phase indication lamps RYB LED. (HSR item No. 31.65)
2
-
-
... More
Supply and fixing of rotary handle for on/off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect. (HSR iem No. 31.66(i)- Rotary handle upto 125A, MCCB
6
-
-
... More
Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1 M below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work -HDPE pipe 63/50mm outer dia/inner dia (HSR item No. 31.67 (i)
2754
-
-
... More
HDPE pipe 9075mm outer dia/inner dia (HSR item No. 31.67 (ii)
70
-
-
... More
Supply and erection of moulded case circuit breaker single pole/four pole on wall or on existing pedestal including bonding to earth and necessary connections- (HSR item No. 31.69 (iv) Four Pole MCCB 6 to 63 amp
6
-
-
... More
Four Pole MCCB 100 amp (HSR item No. 31.69 (v)
1
-
-
... More
Four pole MCCB 200 AMP (125A) (HSR item No. 31.69 (vi)
1
-
-
... More
Supply and laying of multicore telephone cable conductor size 0.51mm brigt annealed copper conductior PVC insulated and sealed in existing pipe/channel and making necessary connections complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work (HSR item No. 31.78 (i) 2 pair telephone wire
60
-
-
... More
Supply, installation, testing and commissioning of 12.5m long high mast manufactured from BSIN 10025 or equivalent grade material in, 2 (two) section hot dip galvanised inside and outside in single dip, suitable for wind velocity as per IS 875 part-3 suitable for 9/12 nos. liminaire loading fully motorised with starter and cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction Engineer-in-Charge (HSR item No. 31.83 (i)
2
-
-
... More
Cement concrete 1:3:6 with stone aggregate 20mm nominal size in foundation (HSR item No. 10.40)
10
-
-
... More
15mm thick cement plaster 1:4 at all level for plastering of foudation of post top lantern pole (HSR item NO. 15.10)
25
-
-
... More
Supply, carriage, erection, testing and commissioning of LED post top lantern with minium efficacy of 100 im/W made out of die cast aluminum base and spun aluminum top fitting with LED PT module, power LEDs mounted directly on extruded head sinks. A UV stablized PC/PMMA diffuser is provided for Glare free lighting with high visual comfort (Lux Max-PT-155 of 40W 3000K (or similar make of K-lite/Philips/Wipro/Bajaj having similar specifications). The job includes making connection to nearest point and all petty material required at site. The work should be completed as per satisfaction of Engineer-in-charge/Architect (NS)
84
-
-
... More
4m high (LuxMax-Steel Pole cat. No. LuxMax-SP-140-400) (NS)
84
-
-
... More
Supply, carriage, erection, testing and commissioning of steel tubular pole with fixture complete in all respect. The ppole is to be fixed on existing RCC foundation by grouting its bolts in the RCC and fixing pole over it complete with all accessories. Steel tubular pole 3M long (2980mm) complete with LED light 30W K-lite make model Lucy 7042 or its equivalent Wipro/Bajaj/SuryaLuxmax nake only) (NS)
22
-
-
... More
Supply, carriage, erection, testing and commissioning of steel tubular pole with fixture complete in all respect. The ppole is to be fixed on existing RCC foundation by grouting its bolts in the RCC and fixing pole over it complete with all accessories. Steel tubular pole 3M long (2930mm) complete with LED light 20W Asymmetric 7026 or its equivalent Wipro/Bajaj/SuryaLuxmax make only) (NS)
29
-
-
... More
Supply, carriage, installation, Testing and commissioning of LED spike light made of pressure die cast alum complete in all aspects with all accessories in IP 65 Housing with toughened galss. The fitting is to be fixed in ground with suitable fixing arrangement and making connection with copper wires to the nearest light point. The work should completed as per satisfaction of Engineer-in-charge/Architect. K-lite make Cat. No. TRIPSCAPE-SPIKE 7052 7W LED WW (7WS)/Bajaj make Cat. No. SPYKZ 112146 BGSBL SW LED WW (4W)/Luxmax make Cat. No. LLUXMAX-SPK-6 (6W) or its equivalent Wipro/Philips or of make as approved in the Department (NS)
43
-
-
... More
Supply, carriage, erection and commissioning of 40-45W LED flood light mounted on existing RCC platform complete with all accessories and control gear complete. The fitting should be L-lite make model NAV/7054 or its equivalent Philips/Wipro/Bajaj/Luxmax make only. The job includes cost of all material and a squire shaped cage made of 25mmx25mmx5mm of angle iron frame of required size to cover the fitting and 10G wire mesh on case for protection of fitting with openable hinged cover on top duly spray painted and have four legs grouted at least 6" in the RCC to cover the fitting (NS)
35
-
-
... More
Supply, carriage, erection, testing and commissioning of Sub merged wall light LED. The fitting is to be fixed in the pond with suitable fixing arrangements including making connection with PVC Cu wires. The work should be completed as per satisfaction of Engineer-in-Charge/Architect. K-lite make 4105 4x2W LED WW. or its equivalent Wipro/Philips/Bajaj make or of make as approved in the Department (NS)
10
-
-
... More
Supply, carriage, erection, testing and commissioning of LED Strip Light 5W per meter with driver. The fitting is to be fixed in the coves in wall including making connection with PVC Cu wires. The work should be completed as per satisfaction of Engineer in charge/architect. 5W/Mtr LED strip light Bajaj Make Cat No. 112499 25W PROFESSIONAL LED STRIP IP65 WW and Driver Cat. No. 112516 25W LED Strip Driver IP 65/5W/mtr/LED strip light/VAK make Cat No. VAK CV-INL-Cove-12-5 (5Mtr lenght) IP-65 or of make as approved in the Department (NS)
273
-
-
... More
Supply, carriage and erection of 200W-220W LED Flood light (Wipro make LF-272-060-57-G2 (200W) or its equivalent Philips/Bajaj/GE make), IP66, Aliminium die-cast housing, powder coated, input Voltage Rang (V)-150V to 270 V, Surge protection -4 kv, efficy 110 lumen/watt, Colour temprature 4000K, LED life 50000 with photo boilogical saftety report-IEC62471, THD less than 10% APFC type Driver, Efficiency of Driver(%) 85%, High purity polycarbonate lenses for superior performance, Toughened glass with silicon gaskets for IP 66 protection, Complete assembly with LED, driver and accessories pre-wired, integral control gear compartment with connector, upto terminal block in connector compartment, External cradle adjustable mounting arrangement suitable formounting with 2 Nos. M8 or 5/16' bolts. The fitting is to be installed on existing pole upto 16m high mast including making all connection to the satisfaction of Engineer-in-charge (NS)
12
-
-
... More
Daily programmable Digital Time Switch timer 3 Mod (1 C/O) Indo Asian (TL040DB0) with 1 No. 3 phase power contactor MNX 32A - 3P complete in all respect. (NS)
3
-
-
... More
Supply and erection of PVC Copper cables flexible multistrand 1100 V garde PVC insulated and PVC sheated FRLS as per IS 694-1990. The cable is to be laid in existing pipe as per site requirement. The work should be completed to the satisfaction of Engineer-in-charge/Architect 6sqmm 3C Cu flexible cable (NS)
175
-
-
... More
4sqmm 3C Cu flexible cable (NS)
175
-
-
... More
2.5sqmm 3C Cu flexible cable (NS)
321
-
-
... More
1.5sqmm 3C Cu flexible cable (NS)
217
-
-
... More
Supply and erection of 1.5sqmm 3Core flat Sumersible cable 1100V grade PVC insulated. The cable is to be laid
under water in existing PVC conduit as per site requirements. The work should be completed to the satisfaction of Engineer-in-charge / Architect. (NS)
100
-
-
... More
Supply, carriage and erection of thermoplasting cable junction boxes IP 66/67 "weather proof" Junction box of size 104x104x70mm suitable for 1.5-4sqmm (NS)
60
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (i) Fan Point (b) Medium point
3
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (c) Fan long point
5
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (ii) (a) light short point
14
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (ii) (b) Light Medium Point
24
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (ii) (c) Light Long point
78
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (iii) (a) Light short point without control
8
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (iii (b) Light Medium Point with control
12
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (iv) (a) Light Plug short point spin 5amp
25
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (iv) (c) light plug long point spin 5amp
1
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (v) (a) Power Plug short point 3Pip 15amp
1
-
-
... More
Wiring in 1.5sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & other face plastes complete (flushed).(HSr item No. 31.36 (v) (c) Power Plug long point 3pip 15 amp
20
-
-
... More
Supply, carriage and erection of LED surface mounted downlight with die cast aluminium boy with LED life of 50000br hours with THD20% and PF0.9 with CRCA housing with IP 20 protection. The jon include cost of all material and erection of fitting with anchor fasternes including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge/Architect 18W LED Downligher Wipro make LD 80-171-xxx-60-SM or its equivalent Philips/ K-lite/Osram/Lux Max (NS)
15
-
-
... More
Supply, carriage and erection of LED surface mounted downlight with die cast aluminium boy with LED life of 50000br hours with THD20% and PF0.9 with CRCA housing with IP 20 protection. The jon include cost of all material and erection of fitting with anchor fasternes including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge/Architect 12W LED Downligher Wipro make LD 80-101-xxx-60-SM or its equivalent Philips/ K-lite/Osram/Lux Max (NS)
11
-
-
... More
Supply, carriage and erection of LED surface mounted downlight with die cast aluminium boy with LED life of 50000br hours with THD20% and PF0.9 with CRCA housing with IP 20 protection. The jon include cost of all material and erection of fitting with anchor fasternes including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge/Architect 18W /20W LED Surface mounted fitting 4' long Wipro make LL-20-221-xxx-65-NE or its equivalent Philips/ K-lite/Osram/Lux Max (NS)
3
-
-
... More
Supply, carriage and erection of LED surface mounted downlight with die cast aluminium boy with LED life of 50000br hours with THD20% and PF0.9 with CRCA housing with IP 20 protection. The jon include cost of all material and erection of fitting with anchor fasternes including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge/Architect. 33W LED fitting Wipro make CRCO10SO36HP57 G1 full glow size 2'x2' or its equivalent Philips/ K-lite/Lux Max (NS)
10
-
-
... More
Supply, carriage and erection of LED surface mounted downlight with die cast aluminium boy with LED life of 50000br hours with THD20% and PF0.9 with CRCA housing with IP 20 protection. The jon include cost of all material and erection of fitting with anchor fasternes including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge/Architect. 32-36W Round LED fixture ceiling suspended complete with suspension system of make Wipro Orbit LED LM71-441-xxx-57-G1 or its equivalent Philips/ K-lite/Lux Max (NS)
18
-
-
... More
Supply, carriage and erection of LED surface mounted downlight with die cast aluminium boy with LED life of 50000br hours with THD20% and PF0.9 with CRCA housing with IP 20 protection. The jon include cost of all material and erection of fitting with anchor fasternes including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge/Architect.LED wall light 12W of K-Lite make Wall Dena Slimmy 4000 12W LED or its equivalent Philips/ K-lite/Lux Max (NS)
21
-
-
... More
Supply, carriage and erection of LED surface mounted downlight with die cast aluminium boy with LED life of 50000br hours with THD20% and PF0.9 with CRCA housing with IP 20 protection. The jon include cost of all material and erection of fitting with anchor fasternes including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge/Architect.LED Mirron light fitting (2feet long) 14W/16W Crompton make LCL-14-CDL or its equivalent Philips/ K-lite/Lux Max (NS)
2
-
-
... More
2x18W/20W LED Surface mounted Industrial Box type fitting 4' long Philips make TMC 501 P 2xT-LED 22 W P3241 and Lamp MAS LED tube 1200mm 18VV865 T8 I-2100 Im or its equivalent Wipro/K-Lite/Lux Max (NS)
12
-
-
... More
Supply, carriage, installation, testing and commissioning of 33W Verge LED High Efficiency Fancy Fitting size 2'x2' Wipro make LM29-451-xxx-57-GRD or its equivalent Philips/K-Lite/Osram/Lux Max. The fitting is to be fixed in false ceiling/Grid Ceiling with suitable fixing arrangement including making all the connections and petty material required to complete the job (NS)
7
-
-
... More
Supply, Carriage, Installation, Testing and Commissioning of LED uplight inground. It is made up of Housing: die-cast aluminum Gasket: silicone rubber, heat-resistant of Philips make BBP330 9XLED HP/NW/WW/220-240V 24 1 N (or Wipro/Crompton GreevesK-LiteLux Max make having similar specifications). It is High Quality High-Power LEDs and integrated LED dirver. Lifetime over 25000 hours (70% lumen maintenance) @ Ta=25 C. Robust design-IP 67 protection and IK 10 impact resistance. Choice of beam angle-60. Available in warm white (3000K) or as decided by Architect. The job inclues Carriage and erection including cost of embedding the fitting including its mounting box after making pit in the existing floor, fixing the fitting in floor and sealing it properly complete to the satisfaction including SS frame as required at site. The work should be completed as per satisfaction of Engineer-in-charge/Architect (NS)
6
-
-
... More
Supply, carriage, erection, testing and commissioning of LED strip light with warm colour LED 15W/mtr wipro cat no.Wipro Make Formz LED LS06-015-120-WH-50 (5mtr spool) 15W (IP20) make or its equivalent Bajaj / Phillips / GE make in existing cove of false ceiling with suitable fixing arrangement as per the requirement of Engineer-in-charge. (NS)
20
-
-
... More
Supply, carriage, erection, testing & commissioning of LED downlighter fitting recessed mounted complete in all respect including internal wiring. The fitting is to be fixed in existing false ceiling after cutting the false ceiling making suitable fixing arragement, fixing fitting, making connections with PVC copper wire including cost of petty material required to complete the job to the satisfaction of Engineer-in-charge. Wipro make LD80-171-xxx-60-xx (18W) or its equivalent Philips / K-Lite / Lux Max (NS)
14
-
-
... More
Supply, Carriage, Erection, Testing & Commissioning of A.C. ceiling fan double ball bearing complete in all respect without fan regulator. The fan should consume less power (Havell's / Usha / Crompton make only). 48" Swwp (NS)
14
-
-
... More
Supply, Carriage, Erection, Testing & Commissioning of A.C. Exhaust fan (ISI Marked Havell's / Crompton / Bajaj make) suitable for single phase A.C. 230 Volts, 50 HZ capacitor,900 RPM (Heavy Duty) complete with mounting ring frame with four fixing holes and automatic louver shutter but without regulator. The exhaust fan and its louver is to be fixed in the existing glazing with suitable MS frame of required thickness as per site including its painting etc. as per site requirement. 300mm sweep (NS)
2
-
-
... More
Supply, Carriage, Erection, Testing & Commissioning of A.C. Exhaust fan (ISI Marked Havell's / Crompton / Bajaj make) suitable for single phase A.C. 230 Volts, 50 HZ capacitor,900 RPM (Heavy Duty) complete with mounting ring frame with four fixing holes and automatic louver shutter but without regulator. The exhaust fan and its louver is to be fixed in the existing glazing with suitable MS frame of required thickness as per site including its painting etc. as per site requirement. 380mm sweep (NS)
7
-
-
... More
Supply, Carriage, Erection, Testing & Commissioning of Fresh air fan 230mm complete with guard. The fresh fan fan is to be fixed in ventilator with 12mm thick wooden board after making hole in board. The board is to be fixed screws etc. including painting of board with matching colour of fresh air fan. The job includes connection from nearest light point with PVC Cu wire including cost of all material (Havell's / Usha / Crompton / Bajaj / Khaitan make) Fresh Air fan 230mm (NS)
1
-
-
... More
Supply, Carriage, Erection, Testing & Commissioning of wall fan 16" sweep (400mm) Oscillating type complete with built-in regulator. (Havell's / Crompton / Orient Make). The fan is to fixed on wall with suitable fixing arrangement including connection from nearest 3pin 6A socket with cost of Cu wire and 5A plug top required as per satisfaction of Engineer-in-charge / Architect. (NS)
1
-
-
... More
Supply, carriage and erection of Modular telephone socket jack with shutter RJ-11 on existing modular box (Havell's / L&T / North-west / Legrand make). (NS)
2
-
-
... More
Supply, carriage and erection of modular type 25A Switch with indicator and 2Nos. 25A Sockets (for incoming and outgoing supply for stabiliser) with modular box and sheet complete in all respect (Legrand (Arteor) / North-west /Crabtree / MK make). The box is to be recessed in wall complete with cost of petty material required to fix the same and labour involved. (NS)
7
-
-
... More
Supply, carriage and erection of modular type 1No. 25A Socket (for AC Unit) with modular box and sheet complete in all respect (Legrand (Arteor) / North-west /Crabtree / MK make). The box is to be recessed in wall complete with cost of petty material required to fix the same and labour involved. (NS)
7
-
-
... More
Supply, carriage and erection of PVC Copper cables flexible multistrand 1100V grade PVC insulated and PVC sheathed FRLS as per IS694-1990. The cable is to be laid in existing pipe as per site requirements. The job includes making connections, testing and commissioning of cable. The work should be completed to the satisfaction of Engineer-in-charge / Architect 6sqmm 3C Cu flexible cable (NS)
36
-
-
... More
Supply and rection of vertical double door sheet enclosure distribution board (IP 43) suitable for MCCB as incomer recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. 4 way, TPN (Vertical, MCCB provision as incomer and provision for 12 Nos. 6A-30A MCB SP as outgoings) (NS)
2
-
-
... More
Providing Haudi of 230mm thick wall with second class bricks. The frame to be made of (40mmx40mmx5mm) angle iron with cover made of inner section of angle iron 35mmx35mmx5mm covered with RCC in ratio 1:2:4 and MS bars of 8mm dia at suitable spacing. The job includes the clearing of all the malba from site and cost of petty material required completing the job to the entire satisfaction of Engineer-in-charge and painting of MS parts. Houdi size 300x300mm 450mm deep (NS)
5
-
-
... More
Electromechanical works for water feature 1-Circular Fountain for Rest House (As per design and standards approved by the Competent Authority) (NS)
1
-
-
... More
Electromechanical works for water feature 2-Linear water feature for Rest House (As per design and standards approved by the Competent Authority) (NS)
1
-
-
... More
Maintenance equipments for Rest House (As per design and standards approved by the Competent Authority) (NS)
1
-
-
... More
Electromechanical work for swimming pool for Rest House(NS)
1
-
-
... More
Swimming pool covering (Tensile structure)-850 sqm or 9150 Sqft) (As per design and standards approved by the Competent Authority)
1
-
-
... More
Tensile structure over food court area (210sqm or 2260 sqft) (NS) (As per design and standards approved by the Competent Authority)
1
-
-
... More
Aaquarium (As per design and standards approved by the Competent Authority)
1
-
-
... More
Credit of steel
12.82
-
-
... More
Credit of brick and brick bats
645.6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements