Irrigation And Water Resources Department Tender

S/E/T/C of Horizontal Centrifugal Split Case Pump set type SCS for raw / clear water having discharge of 2.5 cs at 65 mtr head (200mm x 150mm) (Casing & Impeller ASTMA351, Gr CF8, Shaft and sleeve SS-410) having min.72% efficiency with prime mover of 75 kw/100 HP, 1440 RPM, IE2, TEFC induction motor having voltage rating 380 volt +/- 15% variation confirming to IS:325, mounted on common base plate Heavy Duty with confirming to IS: 6595 coupled through flexible coupling along with MCC Panel having Incomer of 630A, 4 pole MCCB and three nos. outgoings consisting of one No. MCCB of 300A, 3 pole, 35kA, fully automatic ATS starter having contactor rating of 300/200/110 A suitable for 100 HP, 380 +/- 15%V, 50 Hz, 3-phase motor in CRCA sheet enclosure with overload, under voltage and single phasing protection through electronic relay BOCR suitable MCCB, contractors, Ammeter, Voltmeter, selector switch etc along with APFC capacitor Bank fully automatic type of 100 KVAR complete in all respect. The capacitor Bank should have 8 steps consisting of MCCB for each step with Capacitor duty contactor. The bank should have its own separate Incomer MCCB. The MCC should also have 1 No. DOL Starter and one No. MCCB 63A for lighting load. The panel should be inbuilt by one standard approved manufacturer. The work also constitutes of erection of suction pipe 250mm, 8mm thickness complete with flanges, nuts bolts rubber sheet and foot valve of 250mm dia for both sets and delivery pipe 200 mm, 8mm thickness along with Non return Valve and sluice valve of 200mm. All three delivery pipes to be connected with Header pipe 350mmTEE of size 350mm x 350mm x 350mm fabricated in MS plates 8mm thickness. The 350mm side of the tee has to be connected to the existing 350mm HDPE pipe already layed. The work also consists of S/E/C of one No. Vacuum Pump DV40 or SV40 complete with 5 HP prime mover motor, GI pipe of necessary dia complete along with all accessories for connecting the same with the three sets of Horizontal Pump sets. complete with cables for connecting Motors from Starters complete in all respect