Irrigation And Water Resources Department Tender

Providing and fixing LT control panel board suitable for 3 phase for wire AC supply with Bus Bar for running of electric motor with complete in all accessories.(15000 LPM, 450 BHP and 80 mtr Head)

Supply and Pushing of 1000 MS casing pipe of 14mm thickness with 800 mm dia MS Pipe of 12mm thickness by trenchless method adopting micro-tunnelling or any suitable mechanical technology or technology approved by Railway below ground at all depth under running traffic condition as per railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water and sanitary lines and resistivity test for finding the soil strata using necessary equipment’s for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (upto 3 metre depth) with proper protection at three sites with shoring sheets and ISMB`s. Providing MS cutting edges for front shield and Constructing thrust bed at designated level. Necessary de-watering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Railway Authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per requirement and as per approved by railway authorities, specification and the direction of the Engineer. (Protective coating/ lining if done that will be paid extra) Note- 1.Manual Pipe jacking is not permitted for workmen safety reasons. 2.Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers. Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable.

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI 800 mm dia Sluice valves of approved make and design standard of following dia complete (including jointing and jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification and as per direction of Engineer. (Manually Operated with gear Class PN 1.6)

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI 900 mm dia Sluice valves of approved make and design standard of following dia complete (including jointing and jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification and as per direction of Engineer. (Manually Operated with gear Class PN 1.6)

Supplying, erection, testing and commissioning or Horizontal motor pumping set or clear water having head 80.00mtr as requirements of discharge in 15000 LPM and power capacity in 450BHP Make:Lubi, Kirlosker, Crompton, Greeve, Aqua, KSB, CRI,

Operation and maintenance charge for 3 years @ 2% per year for complete project/ all estimate work (Civil work, mechanical work and pipe line work complete in all respect as directed by Engineer-in-charge)