Haryana Urban Development Authority Tender

[13.32]Providing and fixing bolts including nuts and washers complete. [Through Rate]

[23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA [Through Rate]

[23.22.5.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.2. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Single Pole [Through Rate]

[23.27.2]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 2. M.S. pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0 [Through Rate]

[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]

[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.2.1]LT CABLE 1. Supply & erection of LT phase separator on LT line complete in all respect up to entire satisfaction of the Engineer-in-charge of the work. [Through Rate]

[24.2.8.4]LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm [Through Rate]

[24.4.15.1]STREET LIGHT 15.1. B.S.E.N. 10025 High Masts "Supply, installation, testing and commissioning of 12.5 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Thickness of Top and Bottom Section = 3 mm (minimum) Top Dia = 150 mm and Bottom Dia = 360mm Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)" [Through Rate]

[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate]

[24.9.1]RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES 1. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 12.5 m high mast pole [Through Rate]

[34.3.2]Printing New Letter and Figures of any Shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade 2. English and Roman (Hyphens not to be paid) [Labour Rate]

Supply stringing sagging 8 SWG G.I. earth wire as per complete in all respect to the entire satisfaction of Engineer-in-Charge conforming to IS 298/1978 and 7807/1973 and with latest amendment thereof.

S/E of 9 mtr long PCC pole as per IS:1678-1960 specifications. Dimensions 105mmx115 mm at top and 105 mm x315 mm at bottom with working load of 200 Kg, buried 1.80m in ground or as per UHBVNL Specification.

Supplying and erection of M.S.D-Strap iron clamps as per UHBVN design and specifications complete as required.

Supplying and erection of shackle insulator 75mm x 90mm as per UHBVN Specifications as required.

Supply and erection of stay set for L.T. Line complete in all respect with stay wire egg insulator comprising M.S. rod of 20mm dia 8` long with stand 1000 Kg. load and threaded upto 250mm long with cross channel of size 450mm x 450mm made out of M.S. Channel 75x40mmx 6mmx6mm upto the entire satisfaction to Engineer-in-Charge of the work.

S/E of 80mm² ACSR conductor conforming to IS 398 ( Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments and erection of the same with accessories including stringing and sagging of conductor as well as jointing and binding with insulator at supports in all respect up to the entire satisfaction of Engineer-in-Charge.

Supply and erection of PVC insulated 30 Sqmm ACSR of approved make on existing PCC Poles complete in all respect upto the entire satisfaction of Engineer-in-charge.

Supply and erection of guard for L.T. line with guard real complete in all respect up to the entire satisfaction of Engineer-in-Charge.

S/E of PVC insulated and sheathed two or core cable 1100 Volt, each core having single solid aluminum conductor cables as per IS: 694, complete with necessary connections. Make: Grandlay, Polycab, Havel’s 2.5 Sq mm x 3 Core Cable(Un-armd.)

Supply and erection of G.I. Pipe bracket 1.00 Mtr. long, made of 32 mm dia G.I. pipe (B-Class) Jindal Hisar Make suitable for street light fitting including 2 Nos. M.S. Clamps of M.S. Flat size 50x6mm, 06 Nos. Nut and Bolts of size 50x16mm and priming and painting complete in all respect upto the entire satisfaction of E-I-C.

Supply, erection, testing and commissioning of Prodigy type in-built L.T. C.T. meter of 200 amps x 3-phase 415 Volts rating suitable for 3-phase, 4 wire system of make Secure, Genus or other make approved by the UHBVNL. Including meter box of M.S Sheet meter cubical box on existing PCC Pole. This includes all petty material i.e. M. Seal, Nut–Bolts, thimbles etc. Meter will be got tested from the UHBVNL lab by the contractor after deposit of testing fee by him and will be refunded on production of receipt of UHBVNL, including erection of meter and getting sealed by UHBVNL authority.

Supply, erection, testing and commissioning of ELEX-TWS-2EXT / Amson’s/LandT make Automatic electric timer to switch ON/OFF the street light automatically. It should have adjustable lux level switch, with extensible mountable sensor. It shall change ON/OFF timing automatically as per lux level of the Sun at sun-rising and sun setting, throughout the year. Shall have two Nos. LandT make, 3 pole power contactor model MNX-70 to control 70 amp per phase with 220 Volt coils. It shall have auto/manual switch for repair of street light during day time. The whole unit components to be assembled on Bakelite sheet with 16 amp capacity MCB to save the time switch. The erection of the complete unit in the existing pedestal with complete wiring upto the entire satisfaction of the Engineer-in-charge.

Supply, erection, testing and commissioning of L.T. Arial Bunched cable 120 Sqmm x 4C plus 95 Sqmm x1 core messenger wire P.V.C. sheathed on existing PCC pole, Conforming to IS standard and with latest amendments there to complete in all respect up-to the entire satisfaction of E-I-C. Make: Polycab/Havell’s /Grandlay

S/E of underground cable, loose in existing pipe or trenches complete with necessary connections. Make: Grandlay, Polycab, Havel’s 16 Sq. mm 4 Core Cable (Armd.)

Suppply and erection of FRLS PVC insulated and sheathed round 2.5 sqmm 3 core bright annealed copper conductor heavy duty industrial flexible cable for voltage 1100 grade confirming to is 694: complete in all respect upto entire satisfaction of engineer- in charge of work

S/E of 200 watt LED Flood Light Luminari with multiple with highly efficient and high power LED light with individual lens, pressure die cast, aluminium housing with heat sink and aluminium extrusion, with secondary optics and enclosed with toughened glass, IP-66 level having more than 120 lumens/watt, as per specifications attached. With 3 years defect liability period (on site replacement) free of cost complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. Make: Philips, Bajaj / LT.

S/E of 70/72 Watt LED street light luminaire with multiple LED with highly efficient high power LED light with lens, pressure die cast aluminum housing, reflector and enclosed with toughened/Polycarbonat glass, IP-66 level, having light efficacy 120 Lumens/watt up to the entire satisfaction of Engineer -in-charge of the work. Make: Bajaj/Philips/LT. (With 3 years free replacement warranty at site including labour charges free of cost).