Haryana Urban Development Authority Tender

Fine sand (zone IV)

Providing and fixing of Children Playing Equipments as below:-  Providing and fixing of swing (double) Made of 50 mm NB pipes length 3.05 metres crossbar with four nos, legs of 40 mm NB MS pipe 8’ long of reputed make, chain 6 mm thick with clamp assembly with a belt of non-skid nylon enforced rubber all chains are chemically cleaned and electroplated with zinc. All pipes used in making swing are chemically cleaned with and then coated with metal surface primer and finally painted with synthetic paint with a spray system in two coats, to be fixed in Cement Concrete  Frame of the sea saw made of 50 mm dia NB pipe having a length of 5’ and height of 16’ from the ground. The two planks of sea-saw made of 40 mm dia NB pipe with a length of 8’ with cantilever support of 20 mm, NB pipe with handles of 20 mm NB M.S. pipe of the same brand with seats made of molded fiber reinforce plastic (F.R.P.) 4 mm thick. All the joints and welded portion ground with a grinder and filled with M seal for smooth and elegant looking. All the structure cleaned with anti-rust chemical and then powder coated with good quality 1st class synthetic enamel paint, finish. All nuts and bolts used for assembling are coated with zinc electroplating to be fixed in c.c. with a pit size of 30x30x45 cm which is complete in all respect with the direction of the engineer-in-charge  Slope made of 18 gauge Stainless steel sheet (magnetic 430 grade) Mounted on 40 x 40 x 5 mm angle iron with safety railings of 20 m.m M.S. pipe with all necessary supports etc. and ladder made of 25 m.m (n.b) M.S. pipe with 15 mm M.S. pipe duel steps with all welded joints properly ground and filled with m-seal for fine and smoother finish chemically cleaned with anti-rust chemical and then coated with 1st quality of synthetic enamel for a better finish. All nuts and bolts used for assembling are coated with zinc electroplating to be fixed in c.c. with a pit size of 30x30x45 cm which is complete in all respect with the direction of the E.I.C.  All made of 3/4" M.S. pipe, having a circumference of 24 feet hexagonally shaped with a combination of 6' and 5' ht panels, with bridge ladder inside. all welded joints properly ground and filled with m-seal for fine and smoother finish chemically cleaned with anti-rust chemical and then coated with 1st quality of synthetic enamel for a better finish. All nuts and bolts used for assembling are coated with zinc electroplating, which is complete in all respect with the direction of the engineer-in-charge  Made of 50 mm N.B pipe with width 0.35 metres with 1.80 meters high at with sides with centre height 2.10 metres. With rungs of 20 mm NB pipe with electric welding. All welded joints properly ground filled with m-seal for fine and smoother finish chemically cleaned with antirust and then coated with red oxide and then powder coated to give a good finish. All nuts and bolts used for assembling are coated with zinc electroplating, to be fixed in c.c. with pit size of 30x30x45 cm which is complete in all respect with the direction of engineer-in-charge  Platform made of 38 mm square tube 5’ diameter with all necessary cross supports e.t.c. of the same pipe, the ring covered with an aluminum chequered sheet with necessary handles in a cross for holding attached with bearing assembly’s upper part and platform of 1’’ m.s. pipe ‘b’ class, bearing assemblies made of taper roller heavy-duty bearing on solid shaft of 50 mm m.s. bar with self-lubricating oil cup etc., complete in all respect  All made of LLDPE plastic in different pieces with a central pole of 65 mm N.B. M.S. pipe and ladder made of heavy rectangular pipe with steps of same pipe and railing of 1’’ m.s. pipe.  4 nos. Platforms made of aluminum chequered sheet joined by three bridges made of 50mm NB pipe with a heavy-duty entry ladder with steps and several attachments - a tree climber, an LLDPE plastic double slide with gate, an arch climber, two single LLDPE plastic wave slides with gates along with two sets of chain swings with chain and seats and two plastic panels.

Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete.

Planting permanent edging plants around beds, lawn or along paths including of digging of trench 45 cm wide to 15 cm depth, refilling the excavated earth,mixed with farm-yard manure, supplied at the rate of 0.9 cum per sqm and supplying and planting hedge/ edge at 20 cm apart in one or two rows @11no. well trimmed bushy,multi branched ,30 cm to 45 cm in height plants to be supplied in 15 cm x 15 cm poly bags per sqm

Maintaining the permanent edging plants for the one year including application of FYM @ 0.0289 cum,chlorpyriphos 9ml, urea and DAP 40gm each per year ,watering, hoeing weeding trimming and shaping ,replacement of casualty as and when noticed

Supplying and stacking of good quality top layer garden earth free from debris and weeds, at site including royalty and carriage/lead 5 km (good earth measured in stacks will be reduced by 20 % for payment) only for filling of pots and flower.