Haryana Urban Development Authority Tender

24.4.8.7 STREET LIGHT 8.7. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 9 Metre Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm. [Through Rate]

24.5.2.3 MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate]

23.22.1.3 MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.3. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 16 to 100 Amp, 25 KA [Through Rate]

23.22.5.1 MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate]

23.27.3 Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 3. M.S. pedestal of size 750 mm wide , 1200 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0 [Through Rate]

24.13.24 LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 24. 16 Sq mm 4 core (Arm.) [Through Rate]

Job Work Supply, erection, testing and commissioning of ELEX-TWS-2EXT / Amson’s make Automatic electric timer to switch ON/OFF the street light / road light automatically. It should have lux level adjustable switch, with extensible mountable sensor. It will change ON/OFF timing automatically as per lux level of season throughout the year as purchase in the timing of sun-rising and sun setting suitable for street / road light. It will have three Nos. LandT make, 3 pole power contactor model MNX-25 to control 25 amp. Per phase with 220 Volt coils. It will have auto/manual switching mode for repair of street light during day time and the whole unit fixed on Bakelite sheet to assemble the components etc. The erection of the complete unit in the existing pedestal with complete wiring upto the satisfaction of the Engineer-in-charge (Excluding GST).

Job Work Supply and erection of copper conducter PVC insulated and sheathed, 3 crore circular flexible wire, size 2.50 Sqmm complete all respect upto entire satisfication of Engineer-in-charge of the work. (Excluding GST).

Job Work Supply and Erection of 200 Watt LED Flood light luminarie of high power LED light with lens, pressure die cast aluminum housing, reflector and enclosed with toughened glass, IP-66 level, having light efficacy 120 Lumen/Watt up to the entire satisfaction of Engineer-in-Charge of the work. (with 3 years free replacement warranty at site including labour charges free of cost). (Excluding GST) Make :- Philips/Bajaj/LT

Job Work Supply and Erection of round type bracket of 0.75 mtr. radius made out of 50mm dia (Nominal) G.I. Pipe (Medium class) and canopy 0.6 mtr. long made out of 125mm dia G.I. Pipe complete with all labour, nut and bolts and all other petty items on existing 9 mtr. long G.I. Octagonal pole complete in all respect upto entire satisfaction of the Engineer-In-Charge (Excluding GST).

Job Work Supply and Erection of 4.0 mtr. long pole made out of MS and Treated with Hot dip Galvinization, Tubular pole having a dia of 114 mm,`T`washed, primered and PU painted in matt black color, with base plate 200 x 200 x 12 mm havlng design slandard EN40, material ol pole and base plate : A36/A572-50 or equivalent, to hot-dip G,l. to ASTM A123 wilh average G.l. thickness of 45 micron and PU painted with average thickness of 70 mlcron in DFT with high quality paint and primer- The column shall also be provided with flush door at the bottom with proper strengthening to the cutout of the door opening with anti-theft provision along with chanols for etecirical connectivity and door locking arr.rngement to secur€ the setup, including foundation bolts ol size 450mm x 16mm with suitable arrangement fof connection, including folndalion construction charges ol size 0.40 x 0.40 x 0.75 mtr. including CC wotk, Tl,rT steel bars and earth execution work etc. to make the job complele in all respect up for entire satistaction oflhe Engineef-ln-Charge. Make :- Kesslec or equivalenl make of Schneider, Bajaj and Phillips. (Excluding GST).

Job Work Supply and Erection of 50W Decorative LED post top luminaire (IP-66) with top mounted LED Panel, made of high pressure die cast Aluminium housing, bonded to the SLX polycarbonate anti-UV protector having impact resistance of 1K-10, through a silicon gasket and stainless screw to make it an IP-66, Optical compartment having system wattage of 50 Watt with life of 50,000 hours burning at L90 with Lumen 110Lm/W. The fixture must be equipped with lenseflex2 to offer photometric flexibility and performance. The fixtures must be equipped low light pollution, ULOR not more than 3%. The fixtures should have the surge protection up to 10KV with the universal post top mounting complete in all respect up-to entire satisfaction of Engineer-in-charge. Make :- Kesslec or equivalent make of Schneider, Bajaj and Phillips. (Excluding GST).