Haryana Urban Development Authority Tender

[24.2.8.4]LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm [Through Rate]

[24.4.15.1]STREET LIGHT 15.1. B.S.E.N. 10025 High Masts "Supply, installation, testing and commissioning of 12.5 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Thickness of Top and Bottom Section = 3 mm (minimum) Top Dia = 150 mm and Bottom Dia = 360mm Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)" [Through Rate]

[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate]

[24.9.1]RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES 1. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 12.5 m high mast pole [Through Rate]

S/E of PVC insulated and sheathed two or core cable 1100 Volt, each core having single solid aluminum conductor cables as per IS: 694, complete with necessary connections. Make: Grandlay, Polycab, Havel’s 2.5 Sq mm x 3 Core Cable(Un-armd.)

Supply and erection of G.I. Pipe bracket 1.00 Mtr. long, made of 32 mm dia G.I. pipe (B-Class) Jindal Hisar Make suitable for street light fitting including 2 Nos. M.S. Clamps of M.S. Flat size 50x6mm, 06 Nos. Nut and Bolts of size 50x16mm and priming and painting complete in all respect upto the entire satisfaction of E-I-C.

S/E of 25 Watt LED street light luminaire with multiple LED with highly efficient high power LED light with lens, pressure die cast aluminum housing, reflector and enclosed with toughened/ Polycarbonate glass, IP-66 level, having light efficacy 120 Lumens/watt and suitable for 40mm dia street light band, up to the entire satisfaction of Engineer -in-charge of the work. Make: Bajaj/Philips/LT.

Supply and erection of 200 watt LED flood light luminaire with multiple highly efficient and high power LED light with individual lens, pressure die cast aluminium housing with heat sink and aluminium extrusion, with secondary optics and enclosed with toughened glass, IP-66 level, having more than 120 lumens/watt, with 3 years defect liability period (on site replacement) free of cost, complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. Make: Philips, Bajaj, Schreder.

Supply and erection of G.I. Pipe bracket 1.00 Mtr. long, made of 25 mm dia G.I. pipe (B-Class) Jindal Hisar Make suitable for street light fitting including 2 Nos. M.S. Clamps of M.S. Flat size 50x6mm, 06 Nos. Nut and Bolts of size 50x16mm and priming and painting complete in all respect upto the entire satisfaction of Engineer-in-Charge.

S/E of PVC insulated and sheathed two or core cable 1100 Volt, each core having single solid aluminum conductor cables as per IS: 694, complete with necessary connections. Make: Grandlay, Polycab, Havel’s 2.5 Sq mm x 3 Core Cable(Un-armd.)

S/E of underground cable, loose in existing pipe or trenches complete with necessary connections. Make: Grandlay, Polycab, Havel’s 16 Sq. mm 4 Core Cable (Armd.)

S/E of 70/72Watt LED street light luminaries with multiple LED with highly efficient high power LED light with lens, pressure die cast housing, reflector and enclosed with toughened/Polycarbonate glass, and IP-66 level, having light efficacy 120 lumen/watt up to the entire satisfaction of Engineer in charge of the work. Make – Bajaj / Phllips/ LT ( with 3 years free replacement warranty at site including labour charges free of cost)

Only labour charges for ON/OFF operation of street light points of all type of LED Lights, Removal of Fault of circuits, Dismantlement and re-erection of LED fitting from S/L poles for LED lights under defect liability period . For 2nd Year

Only labour charges for ON/OFF operation of street light points of all type of LED Lights, Removal of Fault of circuits, Dismantlement and re-erection of LED fitting from S/L poles for LED lights under defect liability period . For 3rd year.