Haryana Urban Development Authority Tender

N.S Items.:- Lifting & Lowering with special tool for taking out fallen motor pump & submersible cable along with delivery pipe from deep borewell by motor lifting crane machine including manpower & diesel etc at site by expert team by doing the complete job at site, Making of Special Tool & Plant for Extraction of Felt Submersible cable from borewell, Making of Special Breaking of Ring Tool & Plant for Extraction of Felt Submersible Motor Pump set & delivery pipes from bottom depth of borewell, Hammering of Submersible Motor Pump Set with machine for clearance of Borewell depth to lower new motor pump set along with column pipe , Carriage & Transportation charges for line shaft ,welding set ,special tool & plant,borewell camera,motor lifting crane from site to tubewell by canter, Hiring of Electronic Borewell Camera for videography 350’ deep borewell urgently required for internal photography complete in all respect as per entire satisfaction of Engineer-in-charge

20.114.9:- Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of O to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in all respect. Make:- L&T, SIEMENS, BCH, SCHNEIDER.20.114.9 50 HP Motor

33.9.1:- Supplying, assembling, lowering and fixing in vertical position in bore well Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 33.9.1 100 mm i/d