Haryana Urban Development Authority Tender

24.1.1 Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

24.1.2 Extra for using salt and char coal/coke for pipe earth electrode as required.

24.1.12 Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required.

23.27 Supply and erection of Godrej Almirah type M.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1 :2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineerin-charge of the work:- 23.27.4:- M.S. pedestal of size 900 mm wide, 1500 mm high, 450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1050 mm x 600 mm x 200 mm above ground level ,having a base of size 1200 mm x 750 mm x 250 mm below ground level .

24.5.2 S/E mark double walled corrugated (DWC) HOPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. 24.5.2.3 DWC/HOPE pipe 63/50 mm outer dialinner dia

Appd. Item Supply Erection of PVC insulated and sheathed underground cable, loose in existing pipe or trenches 1100 volts core having solid aluminium conductor wires confirming to IS: 694 including making necessary connection complete in all respect up to entire satisfaction of the Engineer-in-charge. (xli) 25 sqmm. 4 core cable (Armoured.)

Appd. Item Supply/erection/Installation/Commissioning of LED Street Light fixture with wattage range of (25 Watt) with Body made of Pressure Die Cast Aluminum Alloy and Cover made of PMMA (Polymethymethacrylate) having system lumen 100lpw with inbuilt protection against short circuit, Miswiring, over voltage and surge protection of 6kv. The IP of fixture and driver compartment should not be less than IP66. The driver should have THD 5% and PF . 95 and Operating Voltage between 100-270V and CRI 75 and Impace Resistance of IK 08 as per approved make in HSVP. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacuturer required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years replacement warranty, mtc. defect liability period free of cost for three years Including Driver against any manufacturing defect). The logo of company should be embossed on the fixture. Make:- Phillips, Bajaj, GE, LT, PANASONIC

Appd. Item Supply and erection of 45 Watt LED Street Light as per approved make in HSVP with body made of Pressure Die Cast Aluminum housing heat resistance toughened glass and IP66 Ingress Protection and other petty material having more than 100 lpw. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacturer to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years Including Driver against any manufacturing defect Separate letter head to be given by the quoting agency). (Including Three Years Free replacement warranty Mtc. at site/Defect Liability Period Free Of Cost). The logo of company should be embossed on the fixture. Make:- Phillips, Bajaj, GE, LT, Panasonic

Appd. Item Supply & Erection of Sensor based AMSON’s/ Indo Asian make automatic Electronic timer to Switch ON/OFF the street / Road light automatically. It will change switching ON/OFF timings automatically on daily basis throughout the year as per change in timing of sun rising and sun setting suitable for street/ Road lights. It will have three contractors of 24 Volt of BCH (Bhartiya Cutler Hammer) to control load upto 40 Amp. Per phase with voltage ratio @230/240. It will have light activated automatic Switching system to switch ON/OFF of the Road street lights. It will have Auto/ manual systems for maintenance of street light during day time. It should have Transformers with voltage ratio 230/240 and other allied accessories as required. Bakelite sheet to assemble the components etc. It should have Kit Kat of 20 Amps capacity to save the time switch from power fluctuation. The device will be housed in the existing pedestal/box/pole etc. in such a way so that it operates at correct timings and erection of the same at site complete in all respect upto the entire satisfaction of Engineer-In-Charge.