Haryana Urban Development Authority Tender

[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate]

[24.5.2.5]MISCELLANEOUS ITEMS 2.5. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 120/105 mm outer dia/ inner dia [Through Rate]

Supply and erection of 100 Amp. Hr 12 V Exide/Luminous /Amron make SMF Battery model EP.-100-12 only complete in all respect with connecting terminals etc and charging unit complete in all respect upto the entire satisfaction of Engineer-In-Charge

Supply and erection of 42 Amp. Hr. Exide/Luminous /Amron make mtc. Free sealed Battery Model EP-42-12 or equivalent along with the charging circuit complete in all respect upto the entire satisfaction of Engineer-In-Charge.

Supply and erection of Standard Cantilever M.S. tubular pole (B-Class) Heavy duty 28’ long and in two steps- bottom portion 10’ long 6” dia Pipe and top portion 18’ long of 5” dia Pipe with provision for the erection of bracket fabricated from 2” dia M.S. pipe of B class upto 10’ i.e. total length of bracket 7.5 Mtr. for each pole long. P type arm suitable for fixing of traffic lights and 8” dia round M.S Plate of 8mm thickness to be provided at the bottom of the pole. The pole will be erected 8% below ground level with base Plate of size 250x250x10mm and with 1:2:4 cement concrete mixture including the cost of MS Junction box of size 10”x4”x4” with welding strengthening and repair etc.. The joining of the pole will be done so as to provide maximum supports to the joints including the cost of the all labour and material required for the jobs including painting of pole. The pole will be provided with suitable reinforced plastic pole top for the safety to cables etc. The mounting arrangement of the lanterns should be made in such a way that signal heads can be adjusted as per required direction of the site complete in all respect upto the entire satisfaction of Engineer-In-Charge. The Pole shall be painted with primer red oxidant two coats of Golden Yellow synthetic enamel Paint. Make:- Jindal/TATA/PARKASH

Supply and erection of One Aspect signal Head Assembly of 12” dia fabricated from polycarbonate materials die moulded complete in all respect of size 15” x 14” complete in all respect with LED type traffic signals glasses Signals head assembly should have provision for mounting on pole to permit directional adjustment. The lenses of red, amber or green colour shall be fabricated from 5mm dia LED’s of light intensity of minimum 2500 mcd and the electronic switching circuit wired on printed circuit board of epoxy material with transport covering glass of polycarbonate materials upto the entire satisfaction of Engineer-In-Charge. Make:- Kaltron/CMS/ Seemen /Keil or equivalent Make i. Signal head assemble with a minimum 225 LED’s of Red/Amber color which shall confirm to relevant ISS /BIS/ISO Specification.

Supply and erection of One Aspect signal Head Assembly of 12” dia fabricated from polycarbonate materials die moulded complete in all respect of size 15” x 14” complete in all respect with LED type traffic signals glasses Signals head assembly should have provision for mounting on pole to permit directional adjustment. The lenses of red, amber or green colour shall be fabricated from 5mm dia LED’s of light intensity of minimum 2500 mcd and the electronic switching circuit wired on printed circuit board of epoxy material with transport covering glass of polycarbonate materials upto the entire satisfaction of Engineer-In-Charge. Make:- Kaltron/CMS/ Seemen /Keil or equivalent Make ii. Glass with a minimum of 66 LED’s of Green colour in Arrow shape color which shall confirm to relevant ISS /BIS/ISO Specification..

Supply and erection on PVC under ground copper conductor 1.5mm armoured cable suitable for A.T.C. signals 660/1100 volts conforming to ISS 1554-1998 laid 90 cms below ground level in existing pipe or in trench including cost of labour material required for the job upto the entire satisfaction of Engineer-In-Charge. Make:- Grandlay/Hevell’s/Polycab 14 Core (loose in pipe)

Supply and erection on PVC under ground copper conductor 1.5mm armoured cable suitable for A.T.C. signals 660/1100 volts conforming to ISS 1554-1998 laid 90 cms below ground level in existing pipe or in trench including cost of labour material required for the job upto the entire satisfaction of Engineer-In-Charge. Make:- Grandlay/Hevell’s/Polycab ii. 8 Core (loose in pipe)

Supply and erection of Battery charger and sub control unit with 36 Nos. 24 V , 2 Amp. DC output for LED glasses to work at the command of master control unit working on 220 volts 50 cycles A.C. supply with programmable circuits and outputs for LED glass with solid state regulated power supply, solid state circuit of 2 Amp. each, Basic wave form Generator and Electronic circuit complete in all respect with DPMCB for incoming in all electronic circuit and battery float charging intelligent circuit of suitable capacity upto the entire satisfaction of Engineer-In-Charge. Make:- Exide/Luminous/Amron)

Supply and erection of intelligent Road Traffic signals controller. The detailed specifications of the controller are as below:- Hardware CPU:- Microprocessor Type MEMORY:- NOVRAM with built in battery backup System Clock:- Calendar clock (RTC) with minimum 5 years battery backup clock Accuracy of Programming plus 1 sec per week Protection:- Overload / over voltage protection with continuous input voltage current and frequency monitoring. Output Isolation:- Through solid state devices with zero cross output solid state switching isolated from control circuit by optical isolation in made female plug type single module Programming facility:- Built - in Engineering keypad facia with backlit LCD Display for editing purpose / separate keypad with Led indications for police personnel to select the modes. RS 232:- Standing port facility for communication with PC Computer. Monitoring:- Separate processor for monitoring conflicts. Both intra and intra groups monitoring of voltage, current, frequency lamp status etc. Time Resolution:- 0.1 Second Features:- Numbers of Signals:- Minimum 16 Signals group should be programmed as either vehicular or Pedestrian dummy groups as desirable. Number of Stages:- 16 Stage Each of the phase can be configured for late start green, Early cut of green with signals groups allied overlapping ENVIRONMENT:- Operating Voltage:- 230 nominal Range:- 180 to 250 V Temperature:- 00 C to 700C Relative Humidity:- 95% without Condensation Automatic restart on power. The controller shall be installed in the pedestal and also making connections to it with the incoming and outgoing cables as per requirements. The work shall be carried out up to the entire satisfaction of Engineer-in-Charge of the work Make:- Keltron/CMS/Seemons or equivalent Make

Supply and erection of MS Pedestal box of approximate size 3’ x 2½ x 2½ fabricated from 16 gauge MS sheet duly painted and with arrangement for energy meter, batteries, voltage stabilizer and control unit etc. The pedestal box to have 4 legs 70cm long of 35mm x 4mm angels iron and grouted 30cm below ground level in cement concrete mixture in all respect with cable entry etc upto the entire satisfaction of Engineer-In-Charge. Make:- Jindal/TATA/PARKASH)

Supply and erection of MS SteelTubular/Heavy duty Pole 20 ft. long made of 4” dia Ms Pipe (B Class) duly welded for traffic signal head assemblies as requirement at site. The pole should be painted with primer red oxide and two coats of golden yellow synthetic enamel paint. The pole is to be erected 3’ below ground level in 1:2:4 cement provision concrete mixture. The pole should have the provision for mounting of junction box with batteries and charger electronic circuit etc. The provision for cable entry should also be made complete in all respects with all labour and material required for the job including welding of 9” x 9” x 1/8” MS Plate at the bottom and erection of the same in size of 2½ x 1 x 1’ cement concrete foundation complete in all respect upto the entire satisfaction of Engineer-In-Charge.. Make:- Jindal/TATA/PARKASH)

Supply and erection of Microprocessor based Down counter Timer of ATC Signals to depict the timings of Red, Straight Green or side Green timings Independently. The down counters of approx, size 22” x 20” fabricated from Reinforced Plastic with 14” long hood having 2½ digits of 8½ height of 4” width with 34 Led as per segment and approximately 250 Led as per digit. Led should be of 5mm dia and 2500 Mcd total No. of Led should be approx 570 and the system should also be provided with one segment of yellow light with at least 34 Led’s to be displayed as optional. upto the entire satisfaction of Engineer-In-Charge. Make:- Keltron/CMS/Seemons or equivalent Make

Execution / Trench less digging for laying of HDPE pipe (Excluding cost of pipe) complete in all respect upto the entire satisfaction of Engineer-In-Charge.

Supply Erection of PVC insulated and sheathed underground cable, loose in existing pipe or trenches 1100 volts core having solid aluminium conductor wires confirming to IS: 694 including making necessary connection complete in all respect up to entire satisfaction of the Engineer-in-charge. 16 sqmm. 2 core cable (Armoured.)