Haryana Urban Development Authority Tender

[24.4.3]STREET LIGHT 3. Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections.

[24.5.1.1]MISCELLANEOUS ITEMS 1.1. Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 1.5 sqmm

[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia

NS Item -Supply and Erection of GI D-Strap as per UHBVN design and specifications complete in all respect up to the entire satisfaction of Engineer-In-Charge (Ex-GST 18%)

NS Item -Supply and Erection of shackle insulator as per UHBVN specification complete in all respect (Ex-GST 18%)

NS Item -Supply and Erection of Stay set for LT line complete with GSS 7/8 SWG, Egg, insulator/ Disc Insulator, GI rod 20mm dia threaded up to 250mm length with Nut (wt.6.224kg), cross plate 460 mm of Channel 75×40×6mm (wt.5.330kg), Elbow (wt.2.240kg), clamp with Nut-Bolts etc. as per UHBVN specification complete in all respect up to the entire satisfaction of Engineer-in-charge. (Ex-GST 18%).

S/E of Guard made of G.I. Wire 8 SWG Conforming toISS:280/1978/1963with latest amendments complete in all respect and erection of the same upto the entire satisfaction of Engineer-In-Charge for L.T. Line.

Supply and erection of Earthing Rod of 20mm dia and 2.5 Mtr. Long shall be tapered to be pointed at one end of about length of 50mm and other end of the rod shall flatten over a length of 150mm into 40mm and having two holes of 12mm dia and 50mm apart alongwith 16 SWG thick conduit pipe 25mm dia 3 Mtr. Long (conforming to IS 9537 (Part-I) enameled black painted complete in all respect upto the entire satisfaction of Engineer-In-Charge.

Supply and Erection of L.T. spacer (Poly Poline type) 4 wire line spacer on the existing L.T. line including the cost of all labour required to complete the job in all respect upto the entire satisfaction of Engineer-In-Charge).

Supply, Erection and Transportation up to site including all taxes as per latest Govt. Instruction amended time again of Prestressed cement concrete pole as per IS: 1678/1960. 9 Mtr. Long 105mm x 115mm at top and 105mm x 315m at bottom with working load of 200kg. Buried 1.80 min ground or as per UHBVNL specification complete in all respect up to the entire satisfaction of Engineer-in-Charge(Ex-GST 18%).

Supply, Installation Testing and Commissioning of LED Street Light Fixture with Wattage range of (45 Watt) with body made of High Pressure Single Piece Die Cast Aluminum Alloy and cover made of PMMA (polymethymethacrylate) having system Lumen)120Ipw with inbuilt Protection against Short Circuit, Miswiring, Over Voltage and Surage Protection of 6 KV. The IP of fixture and Driver Comparment should be IP66 and same for the LED Comparment. The driving current should be ( 700mA with THD ( 5% and PF ). 90 and Operating Voltage between 120-270V and CRI ) 70 and Impact Resistance of IK)05. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacturer required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years Including Driver against any manufacturing defect) (Including Three Years replacement warranty and three years Free Mtc./Defect Liability Period Free Of Cost). The logo of company should be embossed on the fixture. (Makes: - Bajaj/Phillip’s/GE/LT).

NS Item -Supply and Erection of Galvanized steel item (Flat, Angle, Channel) and Nut and Bolts etc. including cutting, bending to the required shape, drilling hole, carriage, loadingunloading complete in all respect up to the entire satisfaction of Engineer-in-charge.(Ex-GST 18%).

S/E of G.S.L. wire 8 SWG conforming to ISS: 280/1978/1963 with latest amendments complete in all respect and erection of the same upto the entire satisfaction of Engineer-In-charge..

S/E and Erection of ACSR PVC Insulated Conductor 30 Sqmm (confirming to IS 398(PART-II)-1976 -1996,4826-1976 , IS: 1521-1972 and IS:1778-1980 with latest amendments and the erection of the same with accessories including stringing and sagging of conductor as well as jointing and binding with insulator at spots complete in all respect up to the entire satisfaction of the engineer –in - charge.

S/E and Erection of ACSR Cond. 50 Sqmm (confirming to IS 398(PART-II)-1976 -1996,4826-1976 , IS: 1521-1972 and IS:1778-1980 with latest amendments and the erection of the same with accessories including stringing and sagging of conductor as well as jointing and binding with insulator at spots complete in all respect up to the entire satisfaction of the engineer –in - charge. ACSR Conductor 50 Sqmm.