Haryana Police Housing Corporation Tender

[23.22.4.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.2. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing) [Through Rate]

[23.22.4.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.3. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 12 way ( 2 incoming and 10 outgoing) [Through Rate]

[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate]

[23.22.5.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.4. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Double pole [Through Rate]

[23.22.5.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.6. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs TRIPLE POLE [Through Rate]

[23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE [Through Rate]

[23.23.8.2]MISCELLANEOUS 8.2. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 4 pair telephone wire [Through Rate]

[23.23.9]MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate]

[23.4.1.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.1. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A [Through Rate]

[23.4.5.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.1. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A [Through Rate]

[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate]

[23.7.6.3]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.3. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 32 mm dia. [Through Rate]

[23.8.10.1]FITTING AND ACCESSORIES 10.1. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data [Through Rate]

[23.8.10.2]FITTING AND ACCESSORIES 10.2. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 Modules [Through Rate]

[23.8.10.3]FITTING AND ACCESSORIES 10.3. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 4 Modules [Through Rate]

[23.8.10.4]FITTING AND ACCESSORIES 10.4. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 6 Modules [Through Rate]

[23.8.11.1]FITTING AND ACCESSORIES 11.1. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp 1 way switch [Through Rate]

[23.8.11.10]FITTING AND ACCESSORIES 11.10. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Blanking plate [Through Rate]

[23.8.11.11]FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type [Through Rate]

[23.8.11.3]FITTING AND ACCESSORIES 11.3. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 1 way switch [Through Rate]

[23.8.11.4]FITTING AND ACCESSORIES 11.4. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp Socket [Through Rate]

[23.8.11.5]FITTING AND ACCESSORIES 11.5. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 6 pin Socket [Through Rate]

[23.8.11.8]FITTING AND ACCESSORIES 11.8. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Telephone Socket outlet modular type [Through Rate]

[23.8.11.9]FITTING AND ACCESSORIES 11.9. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. T.V. Socket outlet modular type [Through Rate]

[24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. [Through Rate]

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate]

[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. [Through Rate]

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. [Through Rate]

[24.13.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 24. 16 Sq mm 4 core (Arm.) [Through Rate]

[24.13.56]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 56. 70 Sq mm 4 core (Arm.) [Through Rate]

[24.7.2]RCC FOUNDATIONS FOR DG SET 2. 60 to 90 KVA DG Set [Through Rate]

[25.3.6]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 6. 100mm dia. [Through Rate]

[25.4.4]Supplying, fixing, testing and commissioning o NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end and PN 16 pressure rating as specified. 4. 100mm dia. [Through Rate]

[6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) [Through Rate]

[6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). [Through Rate]

[6.34.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more. [Through Rate]

[9.22.1]Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1. 1.00 mm thick with zinc coating not less than 275 gm/m² [Through Rate]

[9.32.2]Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated `J` or `L` hooks, bolts and nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2. 2 mm thick flat [Through Rate]

S/E 2MP Fixed IR Dome Camera, 1/2.9” CMOS, Focus:2.8mm, Up to 1920x1080 @30fps, IH plus 265/ H.265/H.264, Min. illumination Color: 0.02Lux@F2.0 Smart IR, IR Range: Up to 30M Support tripwire and perimeter Built-in Mic, SD Card Slot, Reset Button Operating Conditions -35°~65°, 0~95% RH, POE, IP67 complete in all respect including makingnecessary connections etc. Make -Honeywell/ Hikvision/Dahua )

S/E of 2MP Fixed IR Bullet Camera, Up to 1920x1080 @30fps, Image Sensor:1/2.9” CMOS, Focus:4mm IH plus 265/ H.265/H.264 Min. illumination Color: 0.02Lux@F2.0 Smart IR, IR Range: Up to 50M Support tripwire and perimeter Built-in Mic, SD Card Slot, Reset Button Operating Conditions -35°~65°, 0~95% RH POE, IP67 complete in all respect including making necessary connections etc.

S/E of NVR-Video Input:40-CH or better, Max Resolution:12MP,Two-way Audio Input:1-ch, 3.5mm,Bandwidth:Income 200Mbps: Outgoing 200Mbps,HDMI/VGA Output:HDMI 2-ch,Audio Output:1x3.5mm, 1xBNC, Decoding Format:IH plus 265/H.265/H.264, Records Encryption:Yes, SATA: 2 SATA interfaces for 2 HDDs, Capacity:Up to 10TB for each HDD, Network Interface: 2xRJ45 self-adaptive 10/100/1000 Mbps network interface, System Compatibility: ONVIF (PROFILE S/T), Consumption: =25W (without HDD) complete in all respect including making necessaryconnections and other petty material etc.

S/E of 6U Rack-Lockable Toughened Glass Door, Frame:Steel complete in all respect with all labour and petty material required.

S/E of Moulded HDMI cable with Connector complete in all respect with all labour and petty material required

Supply and erection of 55` LED Commercial TV (Pansonic - Make andModel -m LH-55-RM1DX or equivalent model of Samsung/ Sonycomplete in all respect including making necessary connections etc. (Make :Panasonic/Samsung/Sony)

SITC of of pressure switch in M.S. pipe line including connection etc. as required.

Providing and Fixing Electric Control panel for terrace Fire Pump Made out 16 SWG CRCA Sheet Single Door ,Powder coated Red Color out side body , Incorporating automatic switch inbuilt with MNX 25 Contractor , Relay , 4 pole MCB 63amp , Indications showing the power supply condition AMP meter and Volt Meter with Selector Switch auto manual and off Selector Switch , Manual On and Off Push Button with locking arrangement .

Supplying, installation, testing and commissioning of ABS type manual call point complete as required

Supplying, installation, testing and commissioning of ABS type horn cum strobe complete as required

Supplying, installation, testing and commissioning of main control and indicating panel made out of 16 SWG MS Sheet to accommodate the following items duly powder coated in approved colour with louvers for ventitalation locking arrangement , audio and visual indicating for Fire alarm and public addaress system , monitoring system including connection , interconnection etc complete as required . 10 Zone Panel for Fire alarm system . 250 watt amplifier rack suitable for on 230V AC/24V DC supply confirming to IEC-268-3 complete with all accessories as required , Talk back master station with LED PTt 9 Press to talk) push button for operation on 230VAC/24V DC supply confirming to IEC-268 for Simplex mode of operation, announcement control desk suitable for Selection of different zones selectively and on all call swith with visual indication , Amplifier change over switch1 no, Monitor Panel for Loud speaker complete with output selector on/off switch , fuse , visual indication, Gooseneck microphone with stand on/off switch etc complete as required

Supplying and laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring and FRLS outer sheath complete as required.

Providing and fixing fire extinguisher ISI marked complete in all respects. b) ABC Type 4 kg Capacity (multipurpose) ISI Marked (IS 15683)

Providing and fixing fire extinguisher ISI marked complete in all respects. a) CO2 Type 4.5 kg ISI marked.(IS.15683)

Supplying, installation, testing and commissioning of electric driven terrace pump of 900 LPM size at 35 M Head suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirrel cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325. (c) M. S. fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

S/E of Pvc drain pipe of 25mm dia 1.5/2.0 TR cap Split /Cassette / Tower Air Conditioner on wall/Ceiling Complete with all labour and petty material required to complete the job.

Supply and erection of 300 mm aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm and blade thickness 0.80 mm) including all labour and other petty material required to complete the job. required.

S/E of single headed hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with black cap and Stainless Steel chain.

S/E of 2250/2350 VA Invertor sinwave type with Digital Display ( Luminious / Microtek / Sukem) suitable for operation on single phase 230 volts, 50 HZ, AC supply with 2 nos 150 AH Exide batteries having guarantee of 36 Months i/c cost of trolly for batteries complete with all labour and petty material required i/c making necessary connections upto entire staisfaction of Engineer-in-Charge of the work.

SITC of first-aid Hose Reel 30 mtr long with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipment’s on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket.

S/I/T/C of refrigerant piping made of good quality copper tube with insulation and covering pipe and 4 Core 2.5 Sqmm Copper wire required dia 1.5/2.0 TR cap Split /Cassette / Tower Air Conditioner on wall/Ceiling Complete with all labour and petty material required to complete the job.

S/I/T/C of High wall 1.5 TR capacity invertor type of 5 Star rating Split Air- conditioning unit rated at 220 volts ( plus ) (-) 10%,single phase, 50 cycle per second electric supply and consisting of condensing and indoor unit,control panel of the unit, LCD Cordless remote, internal control wiring, thermostats, all accessories , , MS stand and 4 KVA up to 130 volts wall mount voltage stablizer and first charge of Gas and without copper refrigerant Copper wire and drain pipe. The work should be completed in all respect including making repair of wall, floor and roof in original shape caused by making holes and chases etc.

Supply and Erection of hose box double door(750 mm x 600 mm x 250 mm) suitable for 2 No. hose pipe 15 meter, 1 No. short branch pipe complete in all respect. NS

S/E of 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal

S/E of 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal

Supplying, installation, testing and commissioning of Smoke detector built with LED complete with mounting base complete as required.

Supply, erection, testing and commissioning of 13 passengers (G plus 2) Electrical Traction Elevator Roomless , Gearless with Vision Panel in each door of Minimuim size 550mm height and 150mm wide with glass and grill and serving 3 Stops and 3 Opening with speed of 1.0mtr/Second to be erected in accordance with latest IS Specification of Elevator Act and as per the following Technical Specification. (i) Make of Lift :- OTIS / KONE / MITSUBISHI /SCHINDLER/ORBIS ii)Type and capacity : 13 Passanger Elevator of App. 884 Kg. iii) Speed mps : 1.0 mtr per second iv) Travelling (max) in mtrs : Aprrox. 10 mtrs v) Serving : 3 stops, 3 opening (all opening on same side) vi) Power Supply : 3 phase,415 V, 50 HZ A C supply. vii) Control : simplex full collective control with or without atendant. ix ) Motor : Permanent Magnet Synchronous ElectricTraction Gearless Motor to be hoisted on guide rail within the elevator hoistway x) Location of Motor : Motor to be hoisted above the rail within the elevator hoist way. xi) Type of Drive : A. C . Variable Voltage Variable frequency with 16 Bit Microprocessor xii) Car Size : min. 2000 mm wide x 1100 mm depth or as per manufacturer design. xiii) Hoist way available : Appx.2600 mm x 2100 mm or (8`-6` x 7`-0`) xiv) Clear Opening of door : 900 mm wide x 2000 mm high xv) Car Enclosure and Panel : Asthetic Satainless Steel scratch Resistance honey comb finish cabin and Panel . xvi) Car door : Satainless Steel scratch Resistance honey comb finish with Vision Panel in each door of Minimuim size 550mm height and 150mm wide with glass and grill xvii) Door Frame : Satainless Steel scratch Resistance honey comb finish with Vision Panel in each door of Minimuim size 550mm height and 150mm wide with glass and grill xviii) False Ceiling : Stainless steel decorative false ceiling with LED Lighting and blower fan xix) Flooring : - 1,2,3 ( Granite Flooring ) xx) Door Operation : Automatic DC/AC with adjustable Door Opening and closing timings with center opening sliding door Other Features: i) Battery operated intercom,emergency alarm and emergency light with maintance free rechargeable battery. ii) Adjustable guide shoes.(Ensures good ride comfort) iii) Digital direcion and position indicator in Car and at all landings. iv) Integral full height car opening panel with luminous combined with direction arrows, overload warning indicator and services cabinet. v) Hands free press and speak intercom with EPABX for three way communication. vi) Automatic rescue device with Manual rescue Lever (to rescue the Passanger in case of emergency) the device will bring the elevators to the nearest floor and open the door automatically in Case of power / phase failure / low voltage. vii) Full height infrared safety curtain( Highly sensitive safety device for safe entrance and exit of the Passanger into the Car and automatic floor announcer. viii) Diffused lighting in car. ix) Cross floow fans=2 Nos. x) Looking mirror in side of lift car. xi) Face plate Finish : stainless steel scratch Resistance. xii) Face plate : Rectangular. xiii) A three feet high railing shall be provided on car top xiv) The motor shall be high starting torque and low starting current and shall be arranged for self lubrication. xv) Proper weight screen shall be provided at the hoist way. xvi) Fire retardant compound coated traveling cable shall be used. xvii) Micro Movements L.E.D. based Buttons . xviii) Load Weighing device with overload bypass feature. (Audio Visual over load indicator in the car) xix) Steel items such as Door Frames Sill Angles, Fascia Plates, Spring Buffers. xx) Braille fixtures, Lift announcement system, Pit ladder, Hand rail , Pressure sensing device and Additional Car Gate Lock . xxi) Three Side Hand Rails in Stainless Steel Finish xxii) System Capable of withstanding plus 10% to –10% Variation in Supply Voltage Fluctuations. ( C.V.T should be provided for Protection of lift against Single phase, Low voltage and over voltage) xxiii) Car Platform constructed out of Cold Rolled Grain Oriented Formed Sheets of Steel xxiv) Fire Rated Landing Doors for a Period of One Hour Only. xxv) The whole machinery shall be mounted on appropriate anti vibration supports to minimize voice and vibration. xxvi) A handrail not less than 0.60mtr long and 1.0 mtr. Above floor level shall be fixed adjacent to the control panel.. xxvii) The time of automatically closing door shall be minimum 5 seconds and the closing speed shall not exceed 0.25mtr./ Seconds xxviii) Overspeed governor ( Electro-mechanical device that prevents free fall in case the lift is travelling at speed more than 10% of the rated speed in downward direction. xxix) All other required features relates the operation of lift by the Handicapts and Blind person as per instruction of lift inspector. Note:-Elevator Inspection and License and Insurance fees wil be paid by agency

S/I/T/C of High wall 1.8/2.0 TR capacity invertor type of 3 Star rating Split Air- conditioning unit rated at 220 volts ( plus ) (-) 10%,single phase, 50 cycle per second electric supply and consisting of condensing and indoor unit,control panel of the unit, LCD Cordless remote, internal control wiring, thermostats, all accessories , , MS stand and 5 KVA up to 130 volts wall mount voltage stablizer and first charge of Gas and without copper refrigerant Copper wire and drain pipe. The work should be completed in all respect including making repair of wall, floor and roof in original shape caused by making holes and chases etc.

SITC of of pressure guage in M.S. pipe line including connection etc. as required.

Supply, and Erection of 10W LED Bulkhead light fixture with necessary driver lamp, connections, wiring and etc. complying to IP 65 class of protection complete as required.

Supply and erection of Caller ID Telephone instrument with digital display (Beetel- make) including making necessary connection .

Supply and Erection of 1.5 mm sqmm x 3 core PVC insulated multi core copper conductor flexible cable (unarmoured) of 1100 volts grade (round) in existing pole/ pipe, complete in all respect including making necessary connections

Supply and Erection of Commercial Mineral RO system of 50 Ltr/ hr. water Purification Capacity i/c fixing on wall with all petty material and labour reqd. operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc

S/E of ventilation fans (Exhaust fan) Size 300 mm, 900 rpm Heavy Duty ISI marked propeller type suitable for single phase A.C. 230 Volts, 50 HZ supply, A.C capacitor run confirming to IS:23/2/67 , complete with mounting ring with four no.s fixing holes without regulator as per rate contract specifications.with all labour and petty material required

S/I/T/C of 60 KVA water cooled,silent diesel generating set complete with alternator rated at 3 phase,415 volts,0.8 power factor, 50 cycles per second,1500 RPM with AMF panel,Accoustic enclosure and battery charger etc. as per norms of CPCB-IV i/c installation charges complete in all respect with all labour and petty material required to complete the job in all respect upto entire satisfaction of Engineer - In-Charge

Supply and Erection of water cooler stainless steel body with 150 ltr /hr and 150 ltr storage capacity (FSS 304) operation on single phase AC supply complete in all respect up-to the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.

S/I/T/C of Cassette 2.0 TR capacity type of 5 Star rating Split Air- conditioning unit rated at 220 volts ( plus ) (-) 10%,single phase, 50 cycle per second electric supply and consisting of condensing and indoor unit,control panel of the unit, LCD Cordless remote, internal control wiring, thermostats, all accessories , , MS stand and Stabilizer 5 KVA 3 step copper up to 130 volts wall mount voltage stablizer and first charge of Gas and without copper refrigerant Copper wire and drain pipe. The work should be completed in all respect including making repair of wall, floor and roof in original shape caused by making holes and chases etc.