Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 60,00,000Document Cost
₹ 20,000Tender Fee
₹ 1,180
Summary
Construction Of Life-long Care Home For Persons With Intellectual Disabilities
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HBC_382813_1Bid Award Id
ViewTender No
2024F555BFB1 4820 4D35 9B70 CDFEF700289D57HHCTender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
HSR Item 13.10.1-Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 1. 4.0 mm thick glass panes
HSR Rate(Rs.) 539.00 Through Rate
56.53
30466
539
HSR Item 10.61-Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
HSR Rate(Rs.) 756.00 Through Rate
138.32
104570
756
HSR Item 11.95.1-Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
HSR Rate(Rs.) 88.00 Through Rate
1632.9
143695
88
HSR Item 10.38-Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
HSR Rate(Rs.) 836.00 Through Rate
37.88
31668
836
HSR Item 6.27-Extra for R.C.C./ B.M.C/ R.M.C. work above floor IV level for each three floors or part thereof.
HSR Rate(Rs.) 244.00 Through Rate
50
12200
244
HSR Item 11.37.1-Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:
1. In one coat
HSR Rate(Rs.) 132.00 Through Rate
87.55
11556
132
HSR Item 22.79.1-Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 1. 100 mm
HSR Rate(Rs.) 88.00 Through Rate
50
4400
88
HSR Item 12.89-Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
HSR Rate(Rs.) 701.00 Through Rate
24
16824
701
HSR Item 12.98.1-Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 1.
300x16 mm
HSR Rate(Rs.) 201.00 Through Rate
12
2412
201
HSR Item 6.30.1-Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete
HSR Rate(Rs.) 156.00 Through Rate
74.79
11667
156
HSR Item 12.157.2.2-Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.2. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Powder coated aluminium (minimum thickness of powder coating 50 micron)
HSR Rate(Rs.) 403.00 Through Rate
988.7
398444
403
HSR Item 12.103.2-Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 2. Twin rubber stopper
HSR Rate(Rs.) 52.00 Through Rate
78
4056
52
HSR Item 13.3.1.1-Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 1.1. Profile B Fixing with adjustable lugs with split end tail to each jamb
HSR Rate(Rs.) 341.00 Through Rate
349.91
119319
341
HSR Item 13.3.3.1-Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 3.1. Profile E Fixing with adjustable lugs with split end tail to each jamb
HSR Rate(Rs.) 388.00 Through Rate
573.69
222593
388
HSR Item 6.30.15-Centering and shuttering including strutting, propping etc. and removal of form for 15. Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
HSR Rate(Rs.) 155.00 Through Rate
106.86
16562
155
HSR Item 6.1.1-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 3975.00 Through Rate
-
3
3975
HSR Item 12.42-Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
HSR Rate(Rs.) 81.00 Through Rate
38.57
3124
81
HSR Item 12.99.5-Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 5. 100x10 mm HSR Rate(Rs.) 46.00 Through Rate
144
6624
46
HSR Item 12.99.4-Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 4. 150x10 mm HSR Rate(Rs.) 62.00 Through Rate
270
16740
62
HSR Item 12.102.1-Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 1. 125 mm HSR Rate(Rs.) 49.00 Through Rate
204
9996
49
HSR Item 13.9.2-Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3 mm and nuts and bolts complete. 2. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
HSR Rate(Rs.) 697.00 Through Rate
108.03
75299
697
HSR Item 10.51-Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc.
HSR Rate(Rs.) 2534.00 Through Rate
23.55
59678
2534
HSR Item 6.2.3-Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing: 3. 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) HSR Rate(Rs.) 2912.00 Through Rate
4.21
12250
2912
HSR Item 11.5.3-12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)
HSR Rate(Rs.) 84.00 Through Rate
1537.64
129161
84
HSR Item 13.29.2-Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
HSR Rate(Rs.) 83.00 Through Rate
4095.03
339887
83
HSR Item 8.26.2.2-Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 2.2. Granite of any colour and shade
Area of slab over 0.50 sqm
HSR Rate(Rs.) 2776.00 Through Rate
21.65
60108
2776
HSR Item 6.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2442.00 Through Rate
86.72
211767
2442
HSR Item 7.28.2-Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. 2. Cement mortar 1:4 (1 cement :4 coarse sand)
HSR Rate(Rs.) 488.00 Through Rate
335.77
163856
488
NS Item -Providing and fixing of fiberglass mesh (150 gsm) for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in- charge complete in all respects.( HSR Derived Rate)
1115
64670
58
HSR Item 6.25.1-Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge. 1. All works up to plinth level
HSR Rate(Rs.) 4464.00 Through Rate
173.3
773629
4464
HSR Item 10.62-Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
HSR Rate(Rs.) 570.00 Through Rate
330.56
188418
570
HSR Item 10.30.2-Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 2. Medium shade pigment using 50% white cement 50% Grey cement
HSR Rate(Rs.) 754.00 Through Rate
74.43
56117
754
HSR Item 4.12.1-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer- in-charge. 1. All kinds of soil
HSR Rate(Rs.) 78.00 Through Rate
452.72
35312
78
HSR Item 9.58.5.2-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.2.
Bend 87.5°
110 mm bend
HSR Rate(Rs.) 93.00 Through Rate
12
1116
93
HSR Item 7.51-Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).
HSR Rate(Rs.) 3613.00 Through Rate
150.72
544533
3613
HSR Item 4.14.1-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil.
HSR Rate(Rs.) 83.00 Through Rate
53.66
4453
83
HSR Item 6.1.7-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 7. 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2192.00 Through Rate
7.55
16558
2192
HSR Item 11.76-Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.
HSR Rate(Rs.) 37.00 Through Rate
347.75
12866
37
HSR Item 9.47.1-Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main `T` runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross `T` of size 24x25 mm made of
0.30 mm thick (minimum) sheet, 1200 mm long spaced between main `T` at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross `T` of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main `T` runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with
12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer- in-charge. 1. GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
HSR Rate(Rs.) 921.00 Through Rate
34.07
31378
921
HSR Item 10.1-Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling.
HSR Rate(Rs.) 260.00 Through Rate
169.25
44003
260
HSR Item 12.102.2-Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 2. 100 mm HSR Rate(Rs.) 43.00 Through Rate
144
6192
43
HSR Item 4.32-Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. HSR Rate(Rs.) 46.00 Through Rate
506.38
23293
46
HSR Item 12.48.3-Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 3. 25 mm dia
HSR Rate(Rs.) 409.00 Through Rate
111.22
45486
409
HSR Item 12.98.2-Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 2.
250x16 mm
HSR Rate(Rs.) 179.00 Through Rate
54
9666
179
HSR Item 12.99.3-Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 3. 200x10 mm HSR Rate(Rs.) 72.00 Through Rate
126
9072
72
HSR Item 6.30.6-Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts
HSR Rate(Rs.) 262.00 Through Rate
474.84
124407
262
HSR Item 6.30.7-Centering and shuttering including strutting, propping etc. and removal of form for 7. Stairs, (excluding landings) except spiral-staircases
HSR Rate(Rs.) 290.00 Through Rate
34.26
9936
290
HSR Item 6.30.13-Centering and shuttering including strutting, propping etc. and removal of form for 13. Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
HSR Rate(Rs.) 458.00 Through Rate
317.51
145417
458
HSR Item 7.22.2-Brick work with common burnt clay non- modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in
: 2. Cement mortar 1:6 (1 cement : 6 coarse sand)
HSR Rate(Rs.) 4488.00 Through Rate
35.59
159741
4488
HSR Item 10.37.1-Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
1. 25 mm thick
HSR Rate(Rs.) 790.00 Through Rate
179.48
141785
790
HSR Item 10.104-Mirror polishing on marble work/Granite work/stone work whereever reqired to give high gloss finish complete.
HSR Rate(Rs.) 257.00 Through Rate
217.36
55860
257
HSR Item 11.4.2-10 mm thick cement plaster 2. 1:3 (1 cement: 3 fine sand)
HSR Rate(Rs.) 86.00 Through Rate
794.69
68343
86
HSR Item 13.6.1-Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 1. Using M.S. angels 40x40x6 mm for diagonal braces
HSR Rate(Rs.) 2738.00 Through Rate
11.06
30282
2738
HSR Item 11.8.2-12 mm cement plaster of mix : 2. 1:6 (1 cement: 6 coarse sand)
HSR Rate(Rs.) 66.00 Through Rate
627.64
41424
66
HSR Item 10.3-Supplying and providing of Tangri River Sand under floors Including watering and compaction in 25cm layers, dressing etc. complete In all respects (As per item 10.2)
HSR Rate(Rs.) 494.00 Through Rate
971.39
479868
494
HSR Item 9.57.1-Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1. 75 mm diameter
HSR Rate(Rs.) 121.00 Through Rate
71.78
8685
121
HSR Item 9.57.2-Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2. 110 mm diameter
HSR Rate(Rs.) 200.00 Through Rate
58.22
11643
200
HSR Item 10.43-Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.
HSR Rate(Rs.) 14.00 Through Rate
567.72
7948
14
HSR Item 11.77-Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.
HSR Rate(Rs.) 19.00 Through Rate
347.75
6607
19
HSR Item 11.78-Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
HSR Rate(Rs.) 31.00 Through Rate
897.75
27830
31
HSR Item 2.RM172- RM172. 3 mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided
HSR Rate(Rs.) 737.00 Rate
15.61
11506
737
HSR Item 11.46-Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 and II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations, finished in smooth line and level etc. complete.
HSR Rate(Rs.) 188.00 Through Rate
1114.85
209591
188
HSR Item 11.60-Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
HSR Rate(Rs.) 59.00 Through Rate
3027.04
178595
59
HSR Item 11.17-Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in- charge
HSR Rate(Rs.) 234.00 Through Rate
541
126594
234
HSR Item 6.25.2-Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge. 2. All works above plinth level up to floor IV level HSR Rate(Rs.) 4502.00 Through Rate
185.84
836656
4502
HSR Item 6.30.5-Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers
HSR Rate(Rs.) 296.00 Through Rate
526.7
155902
296
HSR Item 6.16-Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). HSR Rate(Rs.) 6113.00 Through Rate
16.4
100240
6113
HSR Item 6.30.3-Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform
HSR Rate(Rs.) 208.00 Through Rate
708.81
147431
208
HSR Item 12.37.1-Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
HSR Rate(Rs.) 1400.00 Through Rate
108.6
152045
1400
HSR Item 12.37.3-Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 3. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
HSR Rate(Rs.) 1316.00 Through Rate
35.75
47041
1316
HSR Item 12.159.2-Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
HSR Rate(Rs.) 922.00 Through Rate
37.81
34859
922
HSR Item 10.42-Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
HSR Rate(Rs.) 79.00 Through Rate
146.53
11576
79
HSR Item 12.104.3-Providing and fixing aluminium casement stays, ISI marked, anodised transparent or dyed to required colour and shade or powder coated or polyester powder coated, with necessary screws etc. complete. 3. Powder coated minimum thickness 50 micron aluminium
HSR Rate(Rs.) 59.00 Through Rate
72
4248
59
HSR Item 12.108.2-Providing fixing aluminium round shape handle of outer dia 100mm with screws etc. complete. 2.
Powder coated minimum thickness 50 micron
HSR Rate(Rs.) 70.00 Through Rate
72
5040
70
HSR Item 10.4-Providing and laying of screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. HSR Rate(Rs.) 88.00 Through Rate
375.05
33004
88
HSR Item 11.54-Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. HSR Rate(Rs.) 31.00 Through Rate
914.4
28346
31
HSR Item 6.21-Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and
reinforcement with 1:1½:3 (1 cement : 1½ coarse sand(zone-
III) : 3 graded stone aggregate 20mm nominal size).
HSR Rate(Rs.) 5655.00 Through Rate
18.15
102615
5655
HSR Item 6.30.4-Centering and shuttering including strutting, propping etc. and removal of form for 4. Shelves (Cast in situ) HSR Rate(Rs.) 223.00 Through Rate
64.98
14491
223
HSR Item 6.49.3-Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 3. 25 mm thick
HSR Rate(Rs.) 626.00 Through Rate
29.61
18537
626
HSR Item 7.22.1-Brick work with common burnt clay non- modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in
: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)
HSR Rate(Rs.) 3877.00 Through Rate
7.09
27503
3877
HSR Item 7.58-Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required.
HSR Rate(Rs.) 75.00 Through Rate
191.48
14361
75
HSR Item 8.23.4-Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised
M.S. screws including drilling holes in masonry work /CC/
R.C.C. and making good etc. complete. 4. 50 mm long
HSR Rate(Rs.) 19.00 Through Rate
96
1824
19
HSR Item 8.28-Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. HSR Rate(Rs.) 393.00 Through Rate
6
2358
393
HSR Item 10.67.2-Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @
3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. Size of Tile 600x600 mm HSR Rate(Rs.) 1004.00 Through Rate
38.26
38413
1004
HSR Item 10.63.2-Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm
HSR Rate(Rs.) 987.00 Through Rate
257.68
254330
987
HSR Item 10.70.1-Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 1. Size of Tile 500x500 mm
HSR Rate(Rs.) 168.00 Through Rate
138.32
23237
168
HSR Item 10.70.2-Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 2. Size of Tile 600x600 mm
HSR Rate(Rs.) 140.00 Through Rate
295.94
41431
140
HSR Item 28.14-Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
HSR Rate(Rs.) 375.00 Through Rate
42.14
15802
375
HSR Item 7.97-30 mm red sand stone sun-shade (chisel- dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete.
HSR Rate(Rs.) 510.00 Through Rate
22.43
11436
510
HSR Item 9.10.1-Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 1. With residual type petroleum bitumen of grade VG -10
HSR Rate(Rs.) 93.00 Through Rate
212.21
19735
93
HSR Item 9.11.1-10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: 1. With common burnt clay non-modular brick tile of class designation 10
HSR Rate(Rs.) 488.00 Through Rate
138
67344
488
HSR Item 9.17.1-Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1. In 75x75 mm deep chase
HSR Rate(Rs.) 112.00 Through Rate
168.94
18920
112
HSR Item 9.58.5.1-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.1.
Bend 87.5°
75 mm bend
HSR Rate(Rs.) 59.00 Through Rate
30
1770
59
HSR Item 7.21.2-Brick work with common burnt clay non- modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR Rate(Rs.) 3531.00 Through Rate
39.79
140512
3531
HSR Item 6.33.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 6. Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, weldedjoints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect for all heights/depths/storeys/basements etc. Note- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.
HSR Rate(Rs.) 66.00 Through Rate
52290.25
3451156
66
Sub-Component :- Public Health Work Houses
-
-
-
HSR Item 21.85.3-Extra for every 0.30 metre depth of Inspection chamber 3. 600 mm x 900 mm inside
HSR Rate(Rs.) 1138.00 Through Rate
4
4552
1138
HSR Item 21.100.2-Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect. 2. 100 mm dia pipe
HSR Rate(Rs.) 638.00 Through Rate
30
19140
638
HSR Item 21.100.3-Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect. 3. 125 mm dia pipe
HSR Rate(Rs.) 812.00 Through Rate
37
30044
812
HSR Item 20.26.1-Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 1. 11.43 cm thick wall
HSR Rate(Rs.) 164.00 Through Rate
6
984
164
HSR Item 20.26.2-Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 2. 22.86 cm thick wall
HSR Rate(Rs.) 242.00 Through Rate
25
6050
242
HSR Item 22.79.1-Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 1. 100 mm
HSR Rate(Rs.) 88.00 Through Rate
50
4400
88
NS Item -Providing and fixing CP Jali/grating 100 mm with hinges complete in all respects (HSR Derived Rate)
51
7599
149
NS Item -Providing and fixing Health Faucet with 1 metre Long Easy Flex Tube in Chrome Finish Including wall hook of approved brand complete in all respects to the satisfaction of engineer in charge. (HSR Derived Rate)
6
7932
1322
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia
Vent
Cowl
10
400
40
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects. For 90 mm dia . Vent Cowl
6
210
35
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia
Nahani Trap without Jali (110x110) mm
36
7776
216
HSR Item 22.120-Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
HSR Rate(Rs.) 401.00 Through Rate
9
3609
401
HSR Item 22.109-Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
HSR Rate(Rs.) 49.00 Through Rate
156
7644
49
HSR Item 22.108.1-Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore
HSR Rate(Rs.) 444.00 Through Rate
57
25308
444
HSR Item 22.107.1-Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore
HSR Rate(Rs.) 508.00 Through Rate
18
9144
508
HSR Item 22.104.1-Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 1. 15 mm nominal bore
HSR Rate(Rs.) 346.00 Through Rate
9
3114
346
HSR Item 22.5-Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
HSR Rate(Rs.) 1104.00 Through Rate
9
9936
1104
HSR Item 22.10.2.1-Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 2.1. Kitchen sink without drain board
610x510 mm bowl depth 200 mm
HSR Rate(Rs.) 2620.00 Through Rate
6
15720
2620
HSR Item 22.19-Providing and fixing 100 mm sand cast Iron grating for gully trap.
HSR Rate(Rs.) 32.00 Through Rate
7
224
32
HSR Item 22.2.1-Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- 1. White vitreous chinaware Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer HSR Rate(Rs.) 3187.00 Through Rate
9
28683
3187
HSR Item 22.33-Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
HSR Rate(Rs.) 10809.00 Through Rate
18
194562
10809
HSR Item 22.38-Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
HSR Rate(Rs.) 241.00 Through Rate
9
2169
241
HSR Item 22.14.1.1-Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
1.1. Semi rigid pipe 32 mm dia
HSR Rate(Rs.) 46.00 Through Rate
15
690
46
NS Item -Providing and fixing CPVC Ball valve of 32mm dia including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer incharge.
18
6948
386
HSR Item 22.222.2.2-Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B
110mm o/d SWR UPVC pipe lines laid complete
HSR Rate(Rs.) 322.00 Through Rate
260
83720
322
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia
Single
Tee with door
30
6510
217
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 90
mm dia . Coupler
10
840
84
HSR Item 22.222.2.3-Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.3. Single Socket Type B
90mm o/d SWR UPVC pipe lines laid complete
HSR Rate(Rs.) 273.00 Through Rate
81
22113
273
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia Coupler
20
2060
103
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects. For 110 mm dia .
Nahani Trap without Jali (110x90) mm
9
1701
189
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110 mm dia . P-Trap
24
9456
394
NS Item -Providing and fixing CPVC tank connector/ tank nipple 25 mm including cutting hole and Jointing the pipe in water tank with solution etc. complete in all respects as per direction of engineer incharge
24
3432
143
NS Item -Providing and fixing CPVC tank connector/ tank nipple 32 mm including cutting hole and Jointing the pipe in water tank with solution etc. complete in all respects as per direction of engineer incharge
6
1260
210
HSR Item 22.181-Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
HSR Rate(Rs.) 7.00 Through Rate
6000
42000
7
HSR Item 21.84.3-Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 3. Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with
R.C.C. slab)
HSR Rate(Rs.) 5438.00 Through Rate
4
21752
5438
HSR Item 21.84.2-Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 2. Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with
C.C. topping)
HSR Rate(Rs.) 4977.00 Through Rate
8
39816
4977
HSR Item 21.84.1-Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 1. Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with
C.C. topping
HSR Rate(Rs.) 3487.00 Through Rate
8
27896
3487
HSR Item 22.102.1-Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 1. 100 mm diameter
HSR Rate(Rs.) 121.00 Through Rate
9
1089
121
HSR Item 22.101.2.1-Providing and fixing Unplasticised PVC connection pipe with brass unions : 2.1. 45 cm length
15 mm nominal bore
HSR Rate(Rs.) 51.00 Through Rate
57
2907
51
HSR Item 22.103.3-Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 3. 25 mm nominal bore
HSR Rate(Rs.) 292.00 Through Rate
6
1752
292
HSR Item 22.209-Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
HSR Rate(Rs.) 813.00 Through Rate
12
9756
813
HSR Item 22.213.1-Providing and fixing in position best Indian make C.P. brass Tooth Brush cum Tooth Paste Holder fixed in with rawl plugs with C.P. brass screws complete including cutting and making good the walls etc. 1. Tooth Brush-cum- Tooth Paste holder
HSR Rate(Rs.) 222.00 Through Rate
9
1998
222
NS Item -Providing and fixing Towel Ring round with round flange of approved brand complete in all respects to the satisfaction of engineer in charge (HSR Derived Rate)
12
7332
611
NS Item -Providing and fixing 25mm CPVC Union in CPVC pipe including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge
40
6480
162
NS Item -Providing and fixing 32mm CPVC Union in CPVC pipe including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge
35
5670
162
NS Item -Providing and fixing CPVC Ball valve of 25mm dia including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge.
24
5760
240
NS Item -Providing and fixing CPVC tank connector/ tank nipple including cutting hole and Jointing the pipe in water tank with solution etc. complete in all respects as per direction of engineer incharge (25mm dia)
24
1752
73
NS Item -Providing and fixing CPVC tank connector/ tank nipple including cutting hole and Jointing the pipe in water tank with solution etc. complete in all respects as per direction of engineer incharge (32mm dia)
6
642
107
HSR Item 9.58.4.1-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 4.1.
Single tee without door 75x75x75 mm
HSR Rate(Rs.) 89.00 Through Rate
18
1602
89
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia
Bend
87.5 degree
50
7300
146
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 90
mm dia .
Bend 87.5 degree
30
3420
114
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects. For 90 mm dia . Single Tee
20
3140
157
HSR Item 2.B1332- B1332. Soap Dish
HSR Rate(Rs.) 445.00 Rate
12
5340
445
HSR Item 22.86.3-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes
HSR Rate(Rs.) 333.00 Through Rate
150.88
50241
333
HSR Item 22.87.4-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.
External work 4. 32 mm nominal outer dia Pipes
HSR Rate(Rs.) 272.00 Through Rate
100
27200
272
HSR Item 22.100.1-Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 1. 15 mm nominal bore
HSR Rate(Rs.) 193.00 Through Rate
4
772
193
HSR Item 4.16.1.2-Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 1.2. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
HSR Rate(Rs.) 62.00 Through Rate
67.06
4157
62
HSR Item 9.58.1.1-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1.1.
Coupler 75 mm
HSR Rate(Rs.) 49.00 Through Rate
12
588
49
HSR Item 9.58.5.2-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.2.
Bend 87.5°
110 mm bend
HSR Rate(Rs.) 93.00 Through Rate
14
1302
93
HSR Item 9.58.4.2-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 4.2.
Single tee without door 110x110x110 mm
HSR Rate(Rs.) 143.00 Through Rate
12
1716
143
HSR Item 9.58.1.2-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1.2.
Coupler 110 mm
HSR Rate(Rs.) 82.00 Through Rate
12
984
82
HSR Item 9.58.5.1-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.1.
Bend 87.5°
75 mm bend
HSR Rate(Rs.) 59.00 Through Rate
12
708
59
HSR Item 22.106.1-Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1. 15 mm nominal bore HSR Rate(Rs.) 457.00 Through Rate
63
28791
457
HSR Item 22.85.3-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes
HSR Rate(Rs.) 233.00 Through Rate
524.76
122269
233
HSR Item 22.86.2-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes
HSR Rate(Rs.) 264.00 Through Rate
146.3
38624
264
HSR Item 22.85.4-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 4. 32 mm nominal outer dia Pipes
HSR Rate(Rs.) 311.00 Through Rate
130.3
40523
311
NS Item -Providing and fixing zinc coated chilly/ hanging clamps along with 10 mm dia GI tie rod and 10 mmx75 mm fasteners for all heightsvfor specified dia pipe complete in all respects to the satisfection of engineer in charge. .
110 mm dia pipe
120
20640
172
Sub-Component :- Civil Work Main Building
-
-
-
HSR Item 11.4.2-10 mm thick cement plaster 2. 1:3 (1 cement: 3 fine sand)
HSR Rate(Rs.) 86.00 Through Rate
13875.74
1193313
86
HSR Item 7.58-Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required.
HSR Rate(Rs.) 75.00 Through Rate
823.19
61739
75
HSR Item 2.RM173- RM173. 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of
0.4 to 0.5 mm on both sided
HSR Rate(Rs.) 982.00 Rate
337.95
331861
982
HSR Item 7.57-Dressed or moulded two brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required.
HSR Rate(Rs.) 166.00 Through Rate
285.04
47316
166
HSR Item 10.70.2-Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 2. Size of Tile 600x600 mm
HSR Rate(Rs.) 140.00 Through Rate
1406.44
196901
140
NS Item -Providing and fixing of fiberglass mesh (150 gsm) for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in- charge complete in all respects.( HSR Derived Rate)
18759
1088022
58
HSR Item 11.37.1-Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:
1. In one coat
HSR Rate(Rs.) 132.00 Through Rate
604.38
79778
132
HSR Item 8.3-Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.
HSR Rate(Rs.) 218.00 Through Rate
2760
601680
218
HSR Item 12.89-Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
HSR Rate(Rs.) 701.00 Through Rate
233
163333
701
HSR Item 29.5-Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge.
For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevant Item).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %,
shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
HSR Rate(Rs.) 1425.00 Through Rate
14.11
20111
1425
HSR Item 28.52-Providing and fixing extruded polystyrene (XPS) foam 50mm thick of density 32 Kg./ cum for thermal insulation with cramps of GI strip 25mm wide x 3mm thick fixed with screw/ nail for holding the walls at regular intervals in cavity walls complete in all respect.
HSR Rate(Rs.) 796.00 Through Rate
2813.6
2239621
796
HSR Item 11.17-Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in- charge
HSR Rate(Rs.) 234.00 Through Rate
2064
482976
234
HSR Item 2.B0783- B0783. Powder coating 50 microns on aluminium sections
HSR Rate(Rs.) 54.00 Rate
1173.66
63377
54
HSR Item 12.160.1-Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
1. With stainless steel cover plate minimum 1.25 mm thickness
HSR Rate(Rs.) 1899.00 Through Rate
80
151920
1899
HSR Item 12.177.1-Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 1. With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm)
HSR Rate(Rs.) 1051.00 Through Rate
448.05
470903
1051
HSR Item 6.27-Extra for R.C.C./ B.M.C/ R.M.C. work above floor IV level for each three floors or part thereof.
HSR Rate(Rs.) 244.00 Through Rate
170
41480
244
HSR Item 12.157.2.2-Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.2. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Powder coated aluminium (minimum thickness of powder coating 50 micron)
HSR Rate(Rs.) 403.00 Through Rate
13985.9
5636318
403
HSR Item 6.30.15-Centering and shuttering including strutting, propping etc. and removal of form for 15. Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
HSR Rate(Rs.) 155.00 Through Rate
1294.95
200716
155
HSR Item 13.10.1-Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 1. 4.0 mm thick glass panes
HSR Rate(Rs.) 539.00 Through Rate
1347.23
726157
539
HSR Item 7.21.2-Brick work with common burnt clay non- modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR Rate(Rs.) 3531.00 Through Rate
225.94
797783
3531
HSR Item 11.46-Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 and II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations, finished in smooth line and level etc. complete.
HSR Rate(Rs.) 188.00 Through Rate
18759.66
3526816
188
HSR Item 12.159.2-Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
HSR Rate(Rs.) 922.00 Through Rate
474.74
437706
922
HSR Item 12.37.1-Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
HSR Rate(Rs.) 1400.00 Through Rate
674.87
944819
1400
HSR Item 9.10.1-Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 1. With residual type petroleum bitumen of grade VG -10
HSR Rate(Rs.) 93.00 Through Rate
3804.77
353843
93
HSR Item 4.38.1-Supplying chemical emulsion in sealed containers including delivery as specified. 1. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
HSR Rate(Rs.) 197.00 Through Rate
2600
512200
197
HSR Item 4.40.2.1-Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.1. Along the external wall below concrete or masonry apron using chemical emulsion @ 4.32 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
HSR Rate(Rs.) 20.00 Through Rate
593.14
11862
20
HSR Item 4.12.1-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer- in-charge. 1. All kinds of soil
HSR Rate(Rs.) 78.00 Through Rate
7700.2
600615
78
HSR Item 12.15-Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
HSR Rate(Rs.) 186.00 Through Rate
52.09
9688
186
HSR Item 6.32.1-Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentring at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). 1.
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
HSR Rate(Rs.) 146.00 Through Rate
11165.9
1630221
146
HSR Item 4.1-Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
HSR Rate(Rs.) 6.00 Through Rate
20345.22
122071
6
HSR Item 8.23.4-Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised
M.S. screws including drilling holes in masonry work /CC/
R.C.C. and making good etc. complete. 4. 50 mm long
HSR Rate(Rs.) 19.00 Through Rate
888
16872
19
HSR Item 6.61.1-Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminium base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it`s components. System shall consist of metal profiles with a universal aluminium base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre- engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall confirm to ASTM 6063). 1. Floor Joint of 100 mm gap
HSR Rate(Rs.) 4472.00 Through Rate
231.57
1035594
4472
HSR Item 6.30.14-Centering and shuttering including strutting, propping etc. and removal of form for 14. Extra for shuttering in circular work (20% of respective centering and shuttering items)
HSR Rate(Rs.) 18.00 Through Rate
50.75
913
18
HSR Item 6.30.13-Centering and shuttering including strutting, propping etc. and removal of form for 13. Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
HSR Rate(Rs.) 458.00 Through Rate
2406.01
1101952
458
HSR Item 12.103.2-Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 2. Twin rubber stopper
HSR Rate(Rs.) 52.00 Through Rate
834
43368
52
HSR Item 12.102.2-Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 2. 100 mm HSR Rate(Rs.) 43.00 Through Rate
600
25800
43
HSR Item 12.102.1-Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 1. 125 mm HSR Rate(Rs.) 49.00 Through Rate
2260
110740
49
HSR Item 12.99.5-Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 5. 100x10 mm HSR Rate(Rs.) 46.00 Through Rate
1161
53406
46
HSR Item 22.79.1-Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 1. 100 mm
HSR Rate(Rs.) 88.00 Through Rate
272
23936
88
HSR Item 9.58.5.2-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.2.
Bend 87.5°
110 mm bend
HSR Rate(Rs.) 93.00 Through Rate
120
11160
93
HSR Item 9.58.5.1-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.1.
Bend 87.5°
75 mm bend
HSR Rate(Rs.) 59.00 Through Rate
90
5310
59
HSR Item 9.58.4.2-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 4.2.
Single tee without door 110x110x110 mm
HSR Rate(Rs.) 143.00 Through Rate
70
10010
143
HSR Item 9.58.1.1-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1.1.
Coupler 75 mm
HSR Rate(Rs.) 49.00 Through Rate
54
2646
49
HSR Item 12.42-Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
HSR Rate(Rs.) 81.00 Through Rate
515.15
41726
81
HSR Item 6.21-Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and
reinforcement with 1:1½:3 (1 cement : 1½ coarse sand(zone-
III) : 3 graded stone aggregate 20mm nominal size).
HSR Rate(Rs.) 5655.00 Through Rate
121.13
684995
5655
HSR Item 3.1.2-By Mechanical Transport including loading, unloading and stacking 2. Earth
HSR Rate(Rs.) 6.00 Beyond 5km up to 10km per KM
186550
1119300
6
HSR Item 7.28.2-Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. 2. Cement mortar 1:4 (1 cement :4 coarse sand)
HSR Rate(Rs.) 488.00 Through Rate
5002.59
2441261
488
HSR Item 10.4-Providing and laying of screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. HSR Rate(Rs.) 88.00 Through Rate
5825.55
512647
88
HSR Item 10.37.1-Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
1. 25 mm thick
HSR Rate(Rs.) 790.00 Through Rate
4695.5
3709442
790
HSR Item 10.51-Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc.
HSR Rate(Rs.) 2534.00 Through Rate
100.57
254854
2534
HSR Item 12.99.3-Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 3. 200x10 mm HSR Rate(Rs.) 72.00 Through Rate
1224
88128
72
HSR Item 11.41-Extra for washed grit plaster on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
HSR Rate(Rs.) 36.00 Through Rate
346.41
12470
36
HSR Item 8.1.1.1-Providing and fixing dry cladding up to 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size up to 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of
Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). 1.1. Red sand stone - 30mm thick gang saw cut stone
HSR Rate(Rs.) 1006.00 Through Rate
459.85
462612
1006
HSR Item 11.8.1-12 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand)
HSR Rate(Rs.) 82.00 Through Rate
6314.08
517754
82
HSR Item 10.67.2-Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @
3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. Size of Tile 600x600 mm HSR Rate(Rs.) 1004.00 Through Rate
79.62
79942
1004
HSR Item 11.8.2-12 mm cement plaster of mix : 2. 1:6 (1 cement: 6 coarse sand)
HSR Rate(Rs.) 66.00 Through Rate
1476.74
97464
66
HSR Item 6.30.3-Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform
HSR Rate(Rs.) 208.00 Through Rate
11165.9
2322507
208
HSR Item 6.30.1-Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete
HSR Rate(Rs.) 156.00 Through Rate
1182.94
184538
156
HSR Item 6.30.5-Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers
HSR Rate(Rs.) 296.00 Through Rate
11223.12
3322043
296
HSR Item 6.2.3-Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing: 3. 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) HSR Rate(Rs.) 2912.00 Through Rate
88.94
258987
2912
HSR Item 6.1.7-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 7. 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2192.00 Through Rate
66.65
146103
2192
HSR Item 4.14.1-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil.
HSR Rate(Rs.) 83.00 Through Rate
357.93
29708
83
HSR Item 7.22.2-Brick work with common burnt clay non- modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in
: 2. Cement mortar 1:6 (1 cement : 6 coarse sand)
HSR Rate(Rs.) 4488.00 Through Rate
389.51
1748138
4488
HSR Item 6.62.1-Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminium base members, self aligning / centering arrangement and support plates as per ASTM B221
- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings and complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminium profiles exhibiting minimal exposed aluminium surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 1. Wall Joint of 100 mm gap
HSR Rate(Rs.) 3660.00 Through Rate
277.37
1015166
3660
HSR Item 6.49.3-Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 3. 25 mm thick
HSR Rate(Rs.) 626.00 Through Rate
63.82
39953
626
HSR Item 28.12-`Providing and applying waterproofing treatment to sound, moisture free concrete surface using liquid applied single component pitch free polyurethane coating capable of bridging substrate cracks up to 2 mm. It shall be applied in two coats at coverage rate of 2kg/sqm to a achieve a minimum DFT of 1.3 mm. The membrane formed shall confirm to following minimum properties:
1) Elongation : )400% as per ASTM D 412
2) Tensile Strength : 2.5 N/mm2 as per ASTM D 412
3) Adhesion in-peel test : )50 N as per ASTM C- 836
4) Recovery from 350% elongation : 95% as per ASTM D 412
5) Water Vapour Transmission 2.3mm film: 0.6 g/m2/hr
6) Initial Hardness Shore A : min 60 as per ASTM D 2240
7) Root resistant : protection screed required
System includes supply , application and termination of coating all complete as per the manufacturer methodology. Clean the RCC slab/screed surface and wall for treatment by removing dust, dirt and layers of concrete over the surface. etc. by mechanical tools and wire brushing. Pressure grouting at construction joints or honeycombs with non shrink cementations grout by mixing shrinkage compensating admixture per bag of cement as per manufacturer’s recommendations. Providing and applying liquid applied single component pitch free polyurethane coating in 2 coats at coverage rate of 2kg/sqm to a achieve a minimum DFT of 1.3 mm. (Fibre cloth/fleece/reinforcement should not be used in between two coats of PU as it has adverse effect on elongation property and also affects bonding with slab).
Termination shall be done 300 mm above vertical wall by providing a groove cut of 30mm x 30mm and seal it with shrinkage compensated polymer modified mortar. Membrane shall be protected using 8mm thick dimple board for protection as per manufacturer`s recommendation followed by backfilling. The rates are inclusive of surface preparation, crack filling, injection grouting at honeycombed areas, coving, priming all complete as per manufacturer methodology but excluding the cost of protection board.
`
HSR Rate(Rs.) 719.00 Through Rate
132.66
95383
719
HSR Item 12.48.3-Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 3. 25 mm dia
HSR Rate(Rs.) 409.00 Through Rate
778
318202
409
HSR Item 11.78-Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
HSR Rate(Rs.) 31.00 Through Rate
13514.19
418939
31
HSR Item 9.58.4.1-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 4.1.
Single tee without door 75x75x75 mm
HSR Rate(Rs.) 89.00 Through Rate
54
4806
89
HSR Item 9.57.1-Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1. 75 mm diameter
HSR Rate(Rs.) 121.00 Through Rate
278.89
33745
121
HSR Item 9.17.1-Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1. In 75x75 mm deep chase
HSR Rate(Rs.) 112.00 Through Rate
1417.81
158794
112
HSR Item 9.18-Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
HSR Rate(Rs.) 147.00 Through Rate
56
8232
147
HSR Item 7.97-30 mm red sand stone sun-shade (chisel- dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete.
HSR Rate(Rs.) 510.00 Through Rate
293.68
149775
510
HSR Item 13.9.2-Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3 mm and nuts and bolts complete. 2. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
HSR Rate(Rs.) 697.00 Through Rate
525.46
366245
697
HSR Item 11.54-Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. HSR Rate(Rs.) 31.00 Through Rate
5000
155000
31
HSR Item 6.25.1-Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge. 1. All works up to plinth level
HSR Rate(Rs.) 4464.00 Through Rate
4979.29
22227555
4464
HSR Item 6.25.2-Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge. 2. All works above plinth level up to floor IV level HSR Rate(Rs.) 4502.00 Through Rate
3029.08
13636922
4502
HSR Item 7.51-Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).
HSR Rate(Rs.) 3613.00 Through Rate
2369.34
8560418
3613
HSR Item 11.95.1-Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
HSR Rate(Rs.) 88.00 Through Rate
20010.94
1760962
88
HSR Item 6.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2442.00 Through Rate
1243.35
3036270
2442
HSR Item 11.35-Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
HSR Rate(Rs.) 23.00 Through Rate
1775.78
40842
23
HSR Item 13.3.1.1-Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 1.1. Profile B Fixing with adjustable lugs with split end tail to each jamb
HSR Rate(Rs.) 341.00 Through Rate
4393.35
1498132
341
HSR Item 10.63.2-Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm
HSR Rate(Rs.) 987.00 Through Rate
1326.81
1309565
987
HSR Item 12.99.4-Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 4. 150x10 mm HSR Rate(Rs.) 62.00 Through Rate
2405
149110
62
HSR Item 28.14-Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
HSR Rate(Rs.) 375.00 Through Rate
1700.03
637510
375
HSR Item 4.32-Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. HSR Rate(Rs.) 46.00 Through Rate
8058.13
370674
46
HSR Item 4.33-Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
HSR Rate(Rs.) 73.00 Through Rate
37309.61
2723601
73
HSR Item 2.RM079- RM079. Earth Cost or compensation for earth taken from private land
HSR Rate(Rs.) 18.00 Rate
37309.61
671572
18
HSR Item 6.1.1-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 3975.00 Through Rate
-
3
3975
HSR Item 10.62-Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
HSR Rate(Rs.) 570.00 Through Rate
6752.7
3849038
570
HSR Item 10.59-Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
HSR Rate(Rs.) 596.00 Through Rate
1771.03
1055533
596
HSR Item 10.50.1-Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
HSR Rate(Rs.) 2707.00 Through Rate
1145.55
3101014
2707
HSR Item 10.44.1-Providing and fixing of marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 1. Makrana white second quality
HSR Rate(Rs.) 2274.00 Through Rate
1167.32
2654485
2274
HSR Item 9.47.1-Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main `T` runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross `T` of size 24x25 mm made of
0.30 mm thick (minimum) sheet, 1200 mm long spaced between main `T` at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross `T` of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main `T` runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with
12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer- in-charge. 1. GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
HSR Rate(Rs.) 921.00 Through Rate
992.2
913813
921
HSR Item 11.9.1-15 mm cement plaster on rough side of single or half brick wall of mix: 1. 1:4 (1 cement: 4 coarse sand)
HSR Rate(Rs.) 139.00 Through Rate
8476.83
1178278
139
HSR Item 11.39-Washed stone grit plaster on exterior walls height up to 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately).
HSR Rate(Rs.) 309.00 Through Rate
1284.62
396948
309
HSR Item 11.42-Extra for washed stone grit plaster on circular work not exceeding 6 m in radius (in two coats).
HSR Rate(Rs.) 33.00 Through Rate
42.58
1405
33
HSR Item 11.40.2-Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 2. 20 mm wide and 15 mm deep groove
HSR Rate(Rs.) 24.00 Through Rate
1566.16
37587
24
HSR Item 8.2-Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal and vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).
HSR Rate(Rs.) 146.00 Material Rate
5518.08
805639
146
HSR Item 8.26.2.2-Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 2.2. Granite of any colour and shade
Area of slab over 0.50 sqm
HSR Rate(Rs.) 2776.00 Through Rate
110.84
307677
2776
HSR Item 6.30.4-Centering and shuttering including strutting, propping etc. and removal of form for 4. Shelves (Cast in situ) HSR Rate(Rs.) 223.00 Through Rate
614.94
137130
223
HSR Item 9.58.1.2-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1.2.
Coupler 110 mm
HSR Rate(Rs.) 82.00 Through Rate
128
10496
82
HSR Item 11.11.2-12 mm cement plaster finished with a floating coat of neat cement of mix : 2. 1:4 (1 cement: 4 fine sand)
HSR Rate(Rs.) 110.00 Through Rate
144
15840
110
HSR Item 8.28-Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. HSR Rate(Rs.) 393.00 Through Rate
118
46374
393
HSR Item 28.30-Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage.
HSR Rate(Rs.) 461.00 Through Rate
100.58
46369
461
HSR Item 7.22.1-Brick work with common burnt clay non- modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in
: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)
HSR Rate(Rs.) 3877.00 Through Rate
21.52
83425
3877
HSR Item 12.98.2-Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 2.
250x16 mm
HSR Rate(Rs.) 179.00 Through Rate
556
99524
179
HSR Item 6.63.1-Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer- In-Charge. The joints shall be of extruded aluminium base members with, self aligning and self centering arrangement support plates as per ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminium base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063). 1. Roof Joint of 100 mm gap
HSR Rate(Rs.) 4124.00 Through Rate
125.88
519133
4124
HSR Item 6.30.6-Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts
HSR Rate(Rs.) 262.00 Through Rate
6795.9
1780526
262
HSR Item 6.30.7-Centering and shuttering including strutting, propping etc. and removal of form for 7. Stairs, (excluding landings) except spiral-staircases
HSR Rate(Rs.) 290.00 Through Rate
244.56
70921
290
HSR Item 28.18-Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservoir, sewage and water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer`s specification in reinforced cement concrete at site of work.
The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
HSR Rate(Rs.) 322.00 Through Rate
100
32200
322
HSR Item 8.32-ALUMINIUM COMPOSITE PANELS
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis and design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material and labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item , as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places.
HSR Rate(Rs.) 2475.00 Through Rate
81.04
200583
2475
HSR Item 29.6-Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
(a) Structural analysis and design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminium sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage and protection against fire hazard including:
(b) Fabricating and supplying serrated M.S. hot dip galvanised
/ Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, TandP, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
HSR Rate(Rs.) 1405.00 Through Rate
67.02
94161
1405
HSR Item 29.3-Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.
HSR Rate(Rs.) 2326.00 Through Rate
6.7
15584
2326
HSR Item 29.4-Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminium sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete.
HSR Rate(Rs.) 1323.00 Through Rate
14.11
18671
1323
HSR Item 29.2-Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in- Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.
(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.29.6)
For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, plus 12mm Air gap plus 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
HSR Rate(Rs.) 2269.00 Through Rate
67.02
152066
2269
HSR Item 29.1-Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
HSR Rate(Rs.) 321.00 Through Rate
670.3
215166
321
HSR Item 12.108.2-Providing fixing aluminium round shape handle of outer dia 100mm with screws etc. complete. 2.
Powder coated minimum thickness 50 micron
HSR Rate(Rs.) 70.00 Through Rate
594
41580
70
HSR Item 12.104.3-Providing and fixing aluminium casement stays, ISI marked, anodised transparent or dyed to required colour and shade or powder coated or polyester powder coated, with necessary screws etc. complete. 3. Powder coated minimum thickness 50 micron aluminium
HSR Rate(Rs.) 59.00 Through Rate
580
34220
59
HSR Item 12.98.1-Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 1.
300x16 mm
HSR Rate(Rs.) 201.00 Through Rate
365
73365
201
HSR Item 11.76-Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.
HSR Rate(Rs.) 37.00 Through Rate
5916.53
218911
37
HSR Item 11.77-Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.
HSR Rate(Rs.) 19.00 Through Rate
5916.53
112414
19
HSR Item 10.42-Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
HSR Rate(Rs.) 79.00 Through Rate
1359.5
107400
79
HSR Item 10.30.3-Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 3. Dark shade pigment using ordinary cement
HSR Rate(Rs.) 601.00 Through Rate
1104.15
663593
601
HSR Item 9.57.2-Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2. 110 mm diameter
HSR Rate(Rs.) 200.00 Through Rate
734.57
146913
200
HSR Item 9.11.1-10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: 1. With common burnt clay non-modular brick tile of class designation 10
HSR Rate(Rs.) 488.00 Through Rate
3489.79
1703015
488
HSR Item 8.27.2-Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 2. Granite work
HSR Rate(Rs.) 230.00 Through Rate
669.73
154038
230
HSR Item 10.3-Supplying and providing of Tangri River Sand under floors Including watering and compaction in 25cm layers, dressing etc. complete In all respects (As per item 10.2)
HSR Rate(Rs.) 494.00 Through Rate
974.17
481237
494
HSR Item 13.29.2-Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
HSR Rate(Rs.) 83.00 Through Rate
37227.89
3089914
83
HSR Item 13.6.1-Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 1. Using M.S. angels 40x40x6 mm for diagonal braces
HSR Rate(Rs.) 2738.00 Through Rate
58.19
159313
2738
HSR Item 12.157.1.2-Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.2. For fixed portion
Powder coated aluminium (minimum thickness of powder coating 50 micron)
HSR Rate(Rs.) 350.00 Through Rate
3936.08
1377628
350
HSR Item 12.37.3-Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 3. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
HSR Rate(Rs.) 1316.00 Through Rate
515.15
677934
1316
HSR Item 11.60-Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
HSR Rate(Rs.) 59.00 Through Rate
30143.38
1778459
59
HSR Item 11.64.1-Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. New work (two or more coats) over and including water thinnable priming coat with cement primer HSR Rate(Rs.) 45.00 Through Rate
29541.24
1329355
45
HSR Item 6.16-Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). HSR Rate(Rs.) 6113.00 Through Rate
168.57
1030443
6113
HSR Item 10.38-Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
HSR Rate(Rs.) 836.00 Through Rate
879.41
735190
836
HSR Item 10.104-Mirror polishing on marble work/Granite work/stone work whereever reqired to give high gloss finish complete.
HSR Rate(Rs.) 257.00 Through Rate
6742.23
1732753
257
HSR Item 10.70.1-Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 1. Size of Tile 500x500 mm
HSR Rate(Rs.) 168.00 Through Rate
1771.03
297533
168
HSR Item 13.3.3.1-Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 3.1. Profile E Fixing with adjustable lugs with split end tail to each jamb
HSR Rate(Rs.) 388.00 Through Rate
7452.03
2891386
388
HSR Item 6.33.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 6. Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, weldedjoints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect for all heights/depths/storeys/basements etc. Note- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.
HSR Rate(Rs.) 66.00 Through Rate
907762
59912292
66
Sub-Component :- Public Health Work Main Building
-
-
-
HSR Item 22.107.1-Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore
HSR Rate(Rs.) 508.00 Through Rate
451
229108
508
HSR Item 22.34-Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer- in-Charge.
HSR Rate(Rs.) 12200.00 Through Rate
30
366000
12200
HSR Item 22.106.1-Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1. 15 mm nominal bore HSR Rate(Rs.) 457.00 Through Rate
246
112422
457
HSR Item 22.86.3-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes
HSR Rate(Rs.) 333.00 Through Rate
2121
706293
333
HSR Item 22.109-Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
HSR Rate(Rs.) 49.00 Through Rate
975
47775
49
HSR Item 22.102.1-Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 1. 100 mm diameter
HSR Rate(Rs.) 121.00 Through Rate
83
10043
121
HSR Item 22.101.2.1-Providing and fixing Unplasticised PVC connection pipe with brass unions : 2.1. 45 cm length
15 mm nominal bore
HSR Rate(Rs.) 51.00 Through Rate
457
23307
51
HSR Item 22.222.2.1-Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.1. Single Socket Type B
160mm o/d SWR UPVC pipe lines laid complete
HSR Rate(Rs.) 534.00 Through Rate
90.1
48113
534
HSR Item 9.58.1.3-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1.3.
Coupler 150 mm
HSR Rate(Rs.) 118.00 Through Rate
50
5900
118
HSR Item 9.58.4.3-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 4.3.
Single tee without door 150x150x150 mm
HSR Rate(Rs.) 205.00 Through Rate
50
10250
205
HSR Item 22.221.9-Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. 9. Size 560mm x 450mm (Under counter oval)
HSR Rate(Rs.) 2359.00 Through Rate
111
261849
2359
HSR Item 22.98.3-Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 3. 32 mm nominal bore.
HSR Rate(Rs.) 485.00 Through Rate
10
4850
485
HSR Item 22.98.5-Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 5. 50 mm nominal bore
HSR Rate(Rs.) 730.00 Through Rate
5
3650
730
HSR Item 22.100.2-Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 2. 20 mm nominal bore
HSR Rate(Rs.) 222.00 Through Rate
4
888
222
HSR Item 22.87.6-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.
External work 6. 50 mm nominal outer dia Pipes
HSR Rate(Rs.) 592.00 Through Rate
130
76960
592
HSR Item 22.87.3-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.
External work 3. 25 mm nominal outer dia Pipes
HSR Rate(Rs.) 201.00 Through Rate
100
20100
201
HSR Item 22.79.1-Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 1. 100 mm
HSR Rate(Rs.) 88.00 Through Rate
350
30800
88
HSR Item 22.22.1-Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. White vitreous chinaware Orissa pattern
W.C. pan of size 580x440 mm with integral type foot rests
HSR Rate(Rs.) 3493.00 Through Rate
30
104790
3493
HSR Item 21.100.3-Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect. 3. 125 mm dia pipe
HSR Rate(Rs.) 812.00 Through Rate
412
334544
812
HSR Item 22.166.1.1-Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 1.1. 100x100 mm size P type
With common burnt clay non-modular bricks of class designation 7.5
HSR Rate(Rs.) 1457.00 Through Rate
35
50995
1457
HSR Item 22.162.1.1-Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter
Class I
HSR Rate(Rs.) 5044.00 Through Rate
4
20176
5044
HSR Item 20.26.2-Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 2. 22.86 cm thick wall
HSR Rate(Rs.) 242.00 Through Rate
110
26620
242
HSR Item 22.5-Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
HSR Rate(Rs.) 1104.00 Through Rate
14
15456
1104
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110 mm dia . P-Trap
350
137900
394
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia
Bend
87.5 degree
550
80300
146
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia
Single
Tee
380
71060
187
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia
Vent
Cowl
70
2800
40
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia
Nahani Trap without Jali (110x110) mm
250
54000
216
NS Item -Providing and fixing CPVC tank connector/ tank nipple including cutting hole and Jointing the pipe in water tank with solution etc. complete in all respects as per direction of engineer incharge (25mm dia)
30
2190
73
NS Item -Providing and fixing CPVC Ball valve of 50mm dia including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge.
10
11390
1139
HSR Item 20.26.1-Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 1. 11.43 cm thick wall
HSR Rate(Rs.) 164.00 Through Rate
50
8200
164
HSR Item 2.B1332- B1332. Soap Dish
HSR Rate(Rs.) 445.00 Rate
209
93005
445
HSR Item 22.119.2-Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 2. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
HSR Rate(Rs.) 360.00 Through Rate
208
74880
360
HSR Item 22.120-Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
HSR Rate(Rs.) 401.00 Through Rate
87
34887
401
HSR Item 22.87.1-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.
External work 1. 15 mm nominal outer dia Pipes
HSR Rate(Rs.) 103.00 Through Rate
100
10300
103
HSR Item 3.1.2-By Mechanical Transport including loading, unloading and stacking 2. Earth
HSR Rate(Rs.) 83.00 5km
37310
3096730
83
HSR Item 22.86.2-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes
HSR Rate(Rs.) 264.00 Through Rate
1519
401016
264
HSR Item 22.85.3-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes
HSR Rate(Rs.) 233.00 Through Rate
1779.95
414727
233
HSR Item 22.108.1-Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore
HSR Rate(Rs.) 444.00 Through Rate
451
200244
444
HSR Item 22.19-Providing and fixing 100 mm sand cast Iron grating for gully trap.
HSR Rate(Rs.) 32.00 Through Rate
35
1120
32
HSR Item 22.85.6-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 6. 50 mm nominal outer dia Pipes
HSR Rate(Rs.) 648.00 Through Rate
40
25920
648
HSR Item 9.58.5.3-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.3.
Bend 87.5°
150 mm bend
HSR Rate(Rs.) 129.00 Through Rate
30
3870
129
HSR Item 22.87.4-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.
External work 4. 32 mm nominal outer dia Pipes
HSR Rate(Rs.) 272.00 Through Rate
400
108800
272
NS Item -Providing and fixing zinc coated chilly/ hanging clamps along with 10 mm dia GI tie rod and 10 mmx75 mm fasteners for all heightsvfor specified dia pipe complete in all respects to the satisfection of engineer in charge. .
110 mm dia pipe
1026
176472
172
HSR Item 22.2.1-Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- 1. White vitreous chinaware Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer HSR Rate(Rs.) 3187.00 Through Rate
14
44618
3187
HSR Item 22.14.1.1-Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
1.1. Semi rigid pipe 32 mm dia
HSR Rate(Rs.) 46.00 Through Rate
167
7682
46
NS Item -Providing and fixing C.P. Brass Centre Hole Basin Mixer With Cast Spout of approved brand for Wash basin etc complete in all respects to the satisfaction of engineer in charge. (HSR Derived Rate)
111
194583
1753
HSR Item 22.33-Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
HSR Rate(Rs.) 10809.00 Through Rate
47
508023
10809
NS Item -Providing and fixing CPVC tank connector/ tank nipple including cutting hole and Jointing the pipe in water tank with solution etc. complete in all respects as per direction of engineer incharge (32mm dia)
20
2140
107
NS Item -Providing and fixing CPVC tank connector/ tank nipple including cutting hole and Jointing the pipe in water tank with solution etc. complete in all respects as per direction of engineer incharge (40mm dia)
20
2820
141
HSR Item 22.209-Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
HSR Rate(Rs.) 813.00 Through Rate
209
169917
813
HSR Item 22.104.1-Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 1. 15 mm nominal bore
HSR Rate(Rs.) 346.00 Through Rate
111
38406
346
HSR Item 22.181-Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
HSR Rate(Rs.) 7.00 Through Rate
8000
56000
7
HSR Item 22.85.4-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 4. 32 mm nominal outer dia Pipes
HSR Rate(Rs.) 311.00 Through Rate
546
169806
311
HSR Item 22.85.5-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 5. 40 mm nominal outer dia Pipes
HSR Rate(Rs.) 430.00 Through Rate
390
167700
430
NS Item -Providing and fixing CP jali/grating 100 mm with hinges complete in all respects.
417
62133
149
HSR Item 8.30.2-Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 2. Granite Stone of approved shade
HSR Rate(Rs.) 2427.00 Through Rate
21.74
52762
2427
HSR Item 22.103.3-Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 3. 25 mm nominal bore
HSR Rate(Rs.) 292.00 Through Rate
15
4380
292
HSR Item 22.222.2.2-Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B
110mm o/d SWR UPVC pipe lines laid complete
HSR Rate(Rs.) 322.00 Through Rate
2289.1
737090
322
HSR Item 22.10.2.1-Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 2.1. Kitchen sink without drain board
610x510 mm bowl depth 200 mm
HSR Rate(Rs.) 2620.00 Through Rate
8
20960
2620
HSR Item 22.50.1.2.1-Providing and fixing partitions for different type of urinals. 1.2.1. Vitreous Chinaware Partition plate.
Large size 835mm x 355 mm White
HSR Rate(Rs.) 1178.00 Through Rate
34
40052
1178
NS Item -Providing and fixing UPVC SWR fittings/accessories for UPVC SWR pipes including jointing with solvent etc. complete in all respects.
For 110
mm dia Coupler
150
15450
103
NS Item -Providing and fixing Urinal (Back Inlet) with fixing accessories having size 385x325x635 mm Jaquar make (URS-WHT-13253N) or equivalent approved brand complete in all respects to the satisfection of engineer in charge.
34
235654
6931
NS Item -Providing and fixing Auto closing concealed Urinal Flush valve with flange Jaquar make (PRS-073) or equivalent approved brand complete in all respects to the satisfection of engineer in charge.
34
84796
2494
NS Item -Providing and fixing CP Waste coupling 32 mm of Jaquar make (ALD-705) or equivalent approved brand complete in all respects to the satisfection of engineer in charge.
157
81483
519
NS Item -Providing and fixing CP Jali/grating 100 mm with hinges complete in all respects (HSR Derived Rate)
417
62133
149
NS Item -Providing and fixing Health Faucet with 1 metre Long Easy Flex Tube in Chrome Finish Including wall hook of approved brand complete in all respects to the satisfaction of engineer in charge. (HSR Derived Rate)
76
100472
1322
NS Item -Providing and fixing Towel Ring round with round flange of approved brand complete in all respects to the satisfaction of engineer in charge (HSR Derived Rate)
210
128310
611
NS Item -Providing and fixing 32mm CPVC Union in CPVC pipe including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge
40
6480
162
NS Item -Providing and fixing 25mm CPVC Union in CPVC pipe including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge
50
8100
162
NS Item -Providing and fixing 50mm CPVC Union in CPVC pipe including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge
20
7360
368
NS Item -Providing and fixing CPVC Ball valve of 25mm dia including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge.
85
20400
240
NS Item -Providing and fixing 20mm CPVC Union in CPVC pipe including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge
10
1370
137
NS Item -Providing and fixing 40mm CPVC Union in CPVC pipe including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge
50
15050
301
NS Item -Providing and fixing CPVC Ball valve of 32mm dia including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer incharge.
35
13510
386
NS Item -Providing and fixing CPVC Ball valve of 40mm dia including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge.
30
19620
654
Sub-Component :- Kitchen Items
-
-
-
NS Item -Supplying and erecting at site hard top deep freezer capacity – 550 litres make – elanpro, western or bluestar, size: standard complete in all respects to the satisfaction of engineer in charge.
2
62104
31052
NS Item -Supplying and Erecting at site stainless steel chopping table with two undershelves with height adjuster,
S.S table top – 18-gauge, undershelf – 20-gauge, legs – 18 gauge with M.S angle fame for table top support, size: 60x30x34 plus 6 complete in all respects to the satisfaction of engineer in charge.
4
77732
19433
NS Item -Providing, Installation and Commissioning of MS `C` Class pipe 15 mm complete with fittings and clamps, including painting etc. make Jindal/ISI mark for Kitchen Gas Connection complete in all respects to the satisfaction of Engineer incharge.
45
17100
380
NS Item -Supplying and erecting at site stainless steel pickup stable table with two undershelves with height adjuster, S.S. table top – 18-gauge, Undershelf – 20 gauge, legs – 18 gauge with M.S. angle fame for table top support. size: 48x30x34 plus 6 complete in all respects to the satisfaction of engineer in charge.
2
31710
15855
NS Item -Providing, Installation and Commissioning of following Kitchen gas accessories ISI Mark for 1 No Kitchen complete in all respects to the satisfaction of Engineer incharge…….
1 Set of Manifold 5x1 Cylenders of M.S. `C` Class 25mm Pipe….... 2 Nos Manifold Supporting Clamp.….5 Nos Non Return Valve 1/2 x 1/2 x R.L….5 nos Gas Regulator S.C. Adoptor…..6 Nos Cylender Hydraulic Picktail - 1/2x1/2x24…..3 Nos Main Control Valve- S.S. 15MM……1 Nos High Pressure Regulator- 30 PSI. 2 Nos Pressure
Gauge Capacity 30 PSI. 7 Nos Brass coupling -15mm
x15mm........20 Nos Pipe Supporting Clamp. 1 nos
Manifold Control Valve- 15mm. 8 Nos Needle Control
Valve -10mmx10mm.........2 Nos Bull nose brass coupler........
5 Nos Burner Hydraulic Picktail 10MMx10MMx1800MM. 10 Nos M.S. Adpoter etc
2
76174
38087
NS Item -Supplying and fixing at site commercial dough mixer for atta kneading capacity – 35 kg heavy duty machine with stainless steel container and heavy-duty dual motor complete in all respects to the satisfaction of engineer in charge.
2
82022
41011
NS Item -Providing and fixing of stainless-steel exhaust hood with waffle filters, oil collector and led lights size: standard as per the ranges complete in all respects to the satisfaction of engineer in charge.
10
213160
21316
NS Item -Supplying and erecting at site stainless steel two burner Indian for normal cooking. Gas burner and all accessories make - Unitech, S.S. table top – 18 gauge, legs – 18 gauge with M.S. angle frame heavy duty, size: 48x30x34 complete in all respects to the satisfaction of engineer in charge.
2
28562
14281
NS Item -Supplying and Erection at site stainless steel low height heavy duty commercial cooking range with heavy duty body and gas burner. S.S table top – 18 gauge, legs – 18 gauge with ms angle frame heavy duty. Size: 30x30x20 complete in all respects to the satisfaction of engineer in charge.
6
80532
13422
NS Item -Providing and fixing of G.I. ducting having a suitable size for exhaust hood and fresh air G.I sheet heavy duty complete in all respects to the satisfaction of engineer in charge.
2400
259200
108
Main-Component : Life Long Care Home building
-
-
-
Sub-Component :- Accessible India
-
-
-
NS Item -Providing and fixing acrylic Braille indicators for handrails of the approved design and make having Braille dots raised 0.5mm above base plate, to be installed at the specified locations as per the directions of the engineer in charge complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge
733
224298
306
NS Item -Providing and fixing `U` shaped `Flip Bar` 650mm long and 30mm-40mm thick diameter of 18-gauge with hinge made up of `stainless steel` of International Standard in the toilets to make them `Unisex Toilet` for visually impaired visitors as per design / specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge
6
72036
12006
NS Item -Providing and fixing `L` shaped `Grab Bar` 600mm long and 30mm-40mm thick diameter of 18-gauge made up of
`stainless steel` of International Standard in the toilets to make them `Unisex Toilet` for visually impaired visitors as per design / specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge
6
38418
6403
NS Item -Providing and fiixing acrylic multilingual Braille (raised dots) DIRECTIONAL SIGNBOARDS of size 6` x 9` designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devanagari non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non-glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge
60
64200
1070
NS Item -Providing and fixing of high intensity reflective conspicuity tape 25 to 50mm width, on edges of treads in staircase including, cutting, pasting etc. of make 3M or equivalent brand complete in all respect to the entire satisfaction of Engineer-in-charge
850
185300
218
NS Item -Providing and fixing acrylic multilingual Braille (raised dots) signboards (DOOR SIGNBOARDS) of size 6`x 9` for room titles, designed as per the drawings issued and having 4mm thick blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devanagari non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. Each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge
240
260160
1084
NS Item -Providing and fixing of acrylic, non-glare, tactile audio pictorial building layout as per the approved size, design and make, having 6mm thick acrylic non glare base plate of the approved color and non-glare acrylic cut out symbols and upper case Sans Serif letters of 12mm height, raised 3mm above base plate and Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. The map to be installed at the specified location as per accessibility standards, shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in- charge
12
227016
18918
NS Item -Providing and fixing Multilingual and tactile Emergency evacuation map of each floor indicating the current position of the viewer saying `YOU ARE HERE` of 15mm height letters in red with white background, indicating the emergency exits, locations of fire extinguishers etc. Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters no less than 3/4` in height.
The size of the board shall be 2ft x 2ft and shall be installed at a height of 1200mm from FFL and shall be oriented to the position of the viewer as per the direction of the site engineer complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge
18
221346
12297
NS Item -Providing and fixing of SS, non-glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2mm thick SS non glare base plate and Grade 2/Grade 1 Braille (raised dots)to be etched/engraved and be raised 0.5mm above base plate and Upper Case San Serif words and Universal Accessibility Symbol to be etched/engraved and signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per accessibility standards complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge
6
98226
16371
HSR Item 10.107-Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. 0 0 0
HSR Rate(Rs.) 1605.00 Through Rate
371.61
596437
1605
HSR Item 13.41-Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
HSR Rate(Rs.) 396.00 Through Rate
9924
3929904
396
NS Item -Providing and fixing retro-reflective information SIGNAGES to provide clear information about the the building/institute in English/Hindi languages clearly visible, readable, understandable , with Type XI Retro-Reflective Sheeting as per ASTM standard and appropriate level, made of 3mm thick ACP sheet with border of 50mm dia round pipe and supported with 200mm dia round pipers of 10-gauge fixed in the gate pillars properly designed M-20 grade cement concrete complete in all respect as per design/specifications and guidelines as per the entire satisfaction of the the Engineer-in-charge (Size 6 Mtr. X 1.22 Mtr.)
1
71306
71306
NS Item -Providing and fixing 50mm wide colour contrast
`EDGE STRIPS` self addhesive on treads of stair cases to help people with visual diabilities and elederly even in dim light condition complete in all respect to the entire satisfaction of Engineer-in-charge
850
62050
73
NS Item -Providing and Fixing of Pictorial layout plan of size 900mmx600mm as approved design, made of 3mm thick acrylic non glare base plate and non glare cut out symbols with grade One Braille on which individual facility points, like inquiry, reception, restrooms, medical room/ first aid, cafeteria or breakout area, lounge, meeting room, conference room etc. present the respective floors with pictograph wherever needed all in tactile raised by minimum of 1to2 mm in various colours to make it legible for seniors, partial vision impaired etc. All the facility names should be in Braille, along with English or Hindi.The entire block of tactile signs should be mounted on wall or on a slant/ inclined frame for easy reading. The map to be installed at specified locations and installed at a height of 800mm from ground level complete in all respect as per Harmonized guideline and satisfaction of Engineer-in-charges.
12
296868
24739
NS Item -Providing and fixing of SS, non-glare multilingual Braille (raised dots) ENTRANCE SIGNAGE (size 1 ft x 1 ft) as per the approved design and make, indicating the name of the building having 1.2mm thick SS non glare blue colored base plate with the `Universal Accessibility Symbol` and Upper case Sans Serif words of height 15mm engraved on it along with the equivalent word/ s written in Hindi using Devanagari script of height 15mm in white color Grade 2/ Grade 1 Braille to be etched/ engraved and be raised 0.5mm above base plate. The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in- charge
4
48896
12224
Sub-Component :- Road, Storm and Play Area
-
-
-
HSR Item 34.26-Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
HSR Rate(Rs.) 542.00 Through Rate
407.8
221027
542
HSR Item 9.57.3-Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 3. 150 mm diameter
HSR Rate(Rs.) 269.00 Through Rate
472.44
127086
269
NS Item -Supplying of Volleyball Nylon Net , standard size complete in all respects to the satisfaction of Engineer incharge.
2
2176
1088
HSR Item 11.95.1-Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
HSR Rate(Rs.) 88.00 Through Rate
1895.03
166762
88
HSR Item 10.98-Providing and fixing Grass paver block of required strength and thickness on 25 mm thick compacted bed of sand and filling the joint with sand complete in all respect
HSR Rate(Rs.) 1198.00 Through Rate
1226.78
1469682
1198
HSR Item 10.15-Extra for using hardener at top surface (3.5Kg /sqm) of trimix M25 to finish surface complete in all respect
HSR Rate(Rs.) 171.00 Through Rate
6978.23
1193276
171
NS Item -Providing and fixing SFRC Road Gully COVERS AND FRAMES IS MARKED including setting the same to correct lines and levels in 1 :3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge.
Rectangular 450x600x80mm
(Heavy Duty)
75
81600
1088
HSR Item 10.77-Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
HSR Rate(Rs.) 637.00 Through Rate
36
22932
637
HSR Item 9.57.2-Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2. 110 mm diameter
HSR Rate(Rs.) 200.00 Through Rate
300
60000
200
HSR Item 22.165.4-Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 4. 250 mm diameter
S.W. pipe
HSR Rate(Rs.) 342.00 Through Rate
455.07
155632
342
HSR Item 22.165.2-Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 2. 150 mm diameter
S.W. pipe
HSR Rate(Rs.) 250.00 Through Rate
377.95
94488
250
NS Item -Supplying and erection of Pair of heavy duty 100 mm dia Football Pole standard size with single piece top bar complete in all respects to the satisfaction of Engineer incharge.
1
33771
33771
HSR Item 17.5.3-Compacting Original Ground 3. Compaction of Earthwork
Compaction of & preparation of sub grade including loosening, levelling of earth 225 mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 3000-2 as per technical clause 305 of MORT&H specifications
HSR Rate(Rs.) 7.00 Through Rate
9418.28
65927
7
HSR Item 17.14.1-Granular Sub-Base with Close Graded Material - (Table:- 400-1) Plant mix method
Construction of granular sub-base by providing Material as
per Grading III (Table 400-I of MORTandH 5th revision) mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller
to achieve the desired density, complete as per technical clause 401 of MORTandH specifications 1. Grading I material HSR Rate(Rs.) 1178.00 Through Rate
991.98
1168557
1178
HSR Item 4.16.1.2-Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 1.2. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
HSR Rate(Rs.) 62.00 Through Rate
1368.55
84850
62
HSR Item 6.39.1-Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
HSR Rate(Rs.) 4135.00 Through Rate
79.09
327020
4135
HSR Item 11.60-Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
HSR Rate(Rs.) 59.00 Through Rate
1895.03
111806
59
HSR Item 10.30.3-Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 3. Dark shade pigment using ordinary cement
HSR Rate(Rs.) 601.00 Through Rate
130.06
78168
601
HSR Item 21.87.1.1-Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar (as Specified in item No. Item 21.48) complete to the requirement of the Engineer in-charge
1.1. Single road gully chamber - Size: 610mm x 457mm x 800mm
HSR Rate(Rs.) 3237.00 Through Rate
45
145665
3237
HSR Item 21.87.1.2-Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar (as Specified in item No. Item 21.48) complete to the requirement of the Engineer in-charge
1.2. Single road gully chamber - Size.-610 mmx457 mmx1105mm
HSR Rate(Rs.) 4085.00 Through Rate
30
122550
4085
HSR Item 22.168.3-Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 3. 250 mm dia. R.C.C. pipe
HSR Rate(Rs.) 463.00 Through Rate
455.07
210696
463
HSR Item 22.165.5-Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 5. 300 mm diameter
S.W. pipe
HSR Rate(Rs.) 395.00 Through Rate
535.53
211535
395
HSR Item 2.B0401- B0401. Cutting groove in RCC (75mmx10mm)
HSR Rate(Rs.) 94.00 Rate
5644.01
530537
94
HSR Item 2.B0389- B0389. Baker rod
HSR Rate(Rs.) 22.00 Rate
6312.55
138876
22
NS Item -Construction of Cinder Walkway by Providing cinder and good earth in ratio of (7:3), mixing the same at site in concrete mixer, spreading in uniform layer, including ramming and watering of the same at OMC complete in all respects to the satisfaction of engineer in charge.
112.61
275209
2444
HSR Item 22.168.4-Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 4. 300 mm dia. R.C.C. pipe
HSR Rate(Rs.) 583.00 Through Rate
535.53
312216
583
HSR Item 6.30.1-Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete
HSR Rate(Rs.) 156.00 Through Rate
816.22
127330
156
HSR Item 17.72-Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORTH specifications
HSR Rate(Rs.) 4932.00 Through Rate
942.32
4647497
4932
HSR Item 4.14.1-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil.
HSR Rate(Rs.) 83.00 Through Rate
130.26
10811
83
HSR Item 6.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2442.00 Through Rate
856.8
2092300
2442
HSR Item 7.21.2-Brick work with common burnt clay non- modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR Rate(Rs.) 3531.00 Through Rate
118.01
416693
3531
HSR Item 11.8.1-12 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand)
HSR Rate(Rs.) 82.00 Through Rate
614.09
50355
82
NS Item -Providing and filling Road Grooves with Polysulphide Sealant after proper cleaning of joints with compressor and using masking tape etc complete in all respects as per direction of engineer incharge.
3056.92
556359
182
HSR Item 34.8.1-Informatory sign board 800x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 1. Using retro reflective Sheeting Class C as per IRC 67 2012
HSR Rate(Rs.) 4865.00 Through Rate
2
9730
4865
HSR Item 34.9.1-Informatory sign board 600x450 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 3 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 1. Using retro reflective Sheeting Class C as per IRC 67 2012
HSR Rate(Rs.) 3550.00 Through Rate
8
28400
3550
HSR Item 34.10.1-Informatory sign board 600x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 3 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 1. Using retro reflective Sheeting Class C as per IRC 67 2012
HSR Rate(Rs.) 4097.00 Through Rate
5
20485
4097
HSR Item 34.11.1-Informatory sign board 900x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 1. Using retro reflective Sheeting Class C as per IRC 67 2012
HSR Rate(Rs.) 6666.00 Through Rate
4
26664
6666
HSR Item 24.8.1-RCC FOUNDATIONS FOR OCTAGONAL
POLES 1. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge
3m high pole
HSR Rate(Rs.) 2667.00 Through Rate
22
58674
2667
HSR Item 26.58.1-Supply and installation of garden bench 1. Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications.
HSR Rate(Rs.) 4814.00 Through Rate
15
72210
4814
NS Item -Supplying and fixing of Pair of Foot Ball Nylon Net of standard size complete in all respects to the satisfaction of Engineer incharge.
1
2358
2358
NS Item -Supplying and erection Pair of 3`/4` heavy duty Volleyball pole adjustable type, standared size complete in all respects to the satisfaction of Engineer incharge.
2
24270
12135
NS Item -Supplying and erection of 40 mm dia heavy duty Fix type Bedminton Pole , standared size complete in all respects to the satisfaction of Engineer incharge.
2
3892
1946
NS Item -Supplying of Badminton Nylon Net of , standard size complete in all respects to the satisfaction of Engineer incharge.
2
802
401
NS Item -Supplying and erection of Pair of heavy duty 200 mm dia Basketball Pole with 3.20 metre extension 90 degree type including fiber board with net as per B.F.I specifications complete in all respects to the satisfaction of Engineer incharge.
1
132221
132221
Main-Component : Civil and PH Estate services
-
-
-
Sub-Component :- UG water tank and water supply
-
-
-
HSR Item 12.37.1-Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
HSR Rate(Rs.) 1400.00 Through Rate
1.92
2689
1400
HSR Item 11.4.2-10 mm thick cement plaster 2. 1:3 (1 cement: 3 fine sand)
HSR Rate(Rs.) 86.00 Through Rate
14.86
1278
86
HSR Item 11.11.2-12 mm cement plaster finished with a floating coat of neat cement of mix : 2. 1:4 (1 cement: 4 fine sand)
HSR Rate(Rs.) 110.00 Through Rate
300.31
33034
110
HSR Item 11.60-Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
HSR Rate(Rs.) 59.00 Through Rate
264.79
15622
59
HSR Item 11.64.1-Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. New work (two or more coats) over and including water thinnable priming coat with cement primer HSR Rate(Rs.) 45.00 Through Rate
48.32
2174
45
HSR Item 11.95.1-Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
HSR Rate(Rs.) 88.00 Through Rate
412.46
36296
88
HSR Item 4.12.1-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer- in-charge. 1. All kinds of soil
HSR Rate(Rs.) 78.00 Through Rate
546.74
42645
78
HSR Item 6.30.1-Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete
HSR Rate(Rs.) 156.00 Through Rate
20.6
3213
156
HSR Item 6.30.2-Centering and shuttering including strutting, propping etc. and removal of form for 2. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
HSR Rate(Rs.) 282.00 Through Rate
365.38
103036
282
HSR Item 6.30.3-Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform
HSR Rate(Rs.) 208.00 Through Rate
185
38479
208
HSR Item 28.18-Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservoir, sewage and water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer`s specification in reinforced cement concrete at site of work.
The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
HSR Rate(Rs.) 322.00 Through Rate
400
128800
322
HSR Item 6.25.1-Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge. 1. All works up to plinth level
HSR Rate(Rs.) 4464.00 Through Rate
156.2
697294
4464
HSR Item 22.91.3-Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.
External work 3. 25 mm dia nominal bore
HSR Rate(Rs.) 242.00 Through Rate
70
16940
242
HSR Item 22.91.5-Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.
External work 5. 40 mm dia nominal bore
HSR Rate(Rs.) 338.00 Through Rate
222.5
75206
338
HSR Item 22.91.6-Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.
External work 6. 50 mm dia nominal bore
HSR Rate(Rs.) 406.00 Through Rate
661.42
268534
406
HSR Item 22.94.3-Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 3. 25 mm nominal bore HSR Rate(Rs.) 212.00 Through Rate
10
2120
212
HSR Item 22.98.5-Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 5. 50 mm nominal bore
HSR Rate(Rs.) 730.00 Through Rate
20
14600
730
HSR Item 22.88.6-Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Internal work - Exposed on wall 6. 50 mm dia nominal bore
HSR Rate(Rs.) 513.00 Through Rate
80
41040
513
HSR Item 22.94.5-Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 5. 40 mm nominal bore HSR Rate(Rs.) 321.00 Through Rate
20
6420
321
HSR Item 22.94.6-Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 6. 50 mm nominal bore HSR Rate(Rs.) 400.00 Through Rate
30
12000
400
HSR Item 22.98.1-Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 1. 25 mm nominal bore
HSR Rate(Rs.) 414.00 Through Rate
20
8280
414
HSR Item 22.98.4-Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 4. 40 mm nominal bore
HSR Rate(Rs.) 567.00 Through Rate
15
8505
567
HSR Item 22.99.4.1-Providing and fixing gun metal non- return valve of approved quality (screwed end) : 4.1. 50 mm nominal bore
Horizontal
HSR Rate(Rs.) 964.00 Through Rate
2
1928
964
HSR Item 11.8.1-12 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand)
HSR Rate(Rs.) 82.00 Through Rate
216.47
17750
82
HSR Item 20.68.1-Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. with in trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. 1. Up to 300mm dia
HSR Rate(Rs.) 64.00 Through Rate
60
3840
64
HSR Item 21.28-Providing and fixing steel bar embedded plastic steps of size 263mm x 165mm of orange colour, confirming to specification in pump chambers, manholes etc., having minimum 3mm thick polypropylene polymer confirming to is:10910 encapsulated on 12mm dia ribbed steel bars per IS :1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1:2:4 cement concrete including carriage, loading, uploading, stacking, handling, re- handling etc., complete in all respect to the satisfaction of Engineer-in-charge
HSR Rate(Rs.) 298.00 Through Rate
40
11920
298
HSR Item 20.114.1-Supplying erection, testing of fully automatic electric control panel board for
T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No.
Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor,
Wooden Box etc as per site
requirement complete in all respect. 1. 10 HP Motor
HSR Rate(Rs.) 11595.00 Through Rate
1
11595
11595
HSR Item 20.61-Providing and fixing Ductile Iron Double seal manhole covers and frames of 610 mm x 610 mm with locking arrangement on clear water tanks including cost of setting in Cement concrete 1:2:4 to correct alignment and levels including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer-in- Charge.
HSR Rate(Rs.) 57.00 Through Rate
200
11400
57
HSR Item 24.5.1.5-MISCELLANEOUS ITEMS 1.5. Supply and
jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge.
Submersible Copper Cable 3 Core 10 sqmm
HSR Rate(Rs.) 183.00 Through Rate
50
9150
183
HSR Item 13.29.2-Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
HSR Rate(Rs.) 83.00 Through Rate
380
31540
83
HSR Item 22.88.5-Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Internal work - Exposed on wall 5. 40 mm dia nominal bore
HSR Rate(Rs.) 417.00 Through Rate
70
29190
417
HSR Item 28.30-Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage.
HSR Rate(Rs.) 461.00 Through Rate
194.77
89788
461
HSR Item 7.22.2-Brick work with common burnt clay non- modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in
: 2. Cement mortar 1:6 (1 cement : 6 coarse sand)
HSR Rate(Rs.) 4488.00 Through Rate
8.05
36123
4488
HSR Item 11.8.2-12 mm cement plaster of mix : 2. 1:6 (1 cement: 6 coarse sand)
HSR Rate(Rs.) 66.00 Through Rate
33.45
2207
66
HSR Item 6.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2442.00 Through Rate
28.66
69982
2442
NS Item -Supplying, erection, testing and commissioning of 5 HP , 3 Phase Horizontal openwell Submersible motor pumping set Kirtosker Pump Model no JOS-540 or eqivalent for water supplies as per direction of engineer incharge complete in all respects.
3
80724
26908
HSR Item 6.33.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 6. Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, weldedjoints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect for all heights/depths/storeys/basements etc. Note- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.
HSR Rate(Rs.) 66.00 Through Rate
15190
1002540
66
Main-Component : Civil and PH Estate services
-
-
-
Sub-Component :- Sewerage work
-
-
-
HSR Item 22.166.1.1-Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 1.1. 100x100 mm size P type
With common burnt clay non-modular bricks of class designation 7.5
HSR Rate(Rs.) 1457.00 Through Rate
39
56823
1457
HSR Item 21.84.1-Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 1. Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with
C.C. topping
HSR Rate(Rs.) 3487.00 Through Rate
30
104610
3487
HSR Item 21.94.3-Providing salt glazed stone ware pipes grade ‘A’ in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 including the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge. 3. 200mm i/d
HSR Rate(Rs.) 238.00 Through Rate
511.15
121653
238
HSR Item 21.28-Providing and fixing steel bar embedded plastic steps of size 263mm x 165mm of orange colour, confirming to specification in pump chambers, manholes etc., having minimum 3mm thick polypropylene polymer confirming to is:10910 encapsulated on 12mm dia ribbed steel bars per IS :1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1:2:4 cement concrete including carriage, loading, uploading, stacking, handling, re- handling etc., complete in all respect to the satisfaction of Engineer-in-charge
HSR Rate(Rs.) 298.00 Through Rate
150
44700
298
HSR Item 2.PH169- PH169. Manhole cover and frame 20 kg with CC topping
HSR Rate(Rs.) 1072.00 Rate
32
-34304
1072
HSR Item 2.PH170- PH170. Manhole cover and frame 38 kg with CC topping
HSR Rate(Rs.) 2009.00 Rate
24
-48216
2009
HSR Item 21.84.2-Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 2. Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with
C.C. topping)
HSR Rate(Rs.) 4977.00 Through Rate
29
144333
4977
HSR Item 21.84.3-Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 3. Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with
R.C.C. slab)
HSR Rate(Rs.) 5438.00 Through Rate
22
119636
5438
HSR Item 21.85.3-Extra for every 0.30 metre depth of Inspection chamber 3. 600 mm x 900 mm inside
HSR Rate(Rs.) 1138.00 Through Rate
42
47796
1138
HSR Item 22.201.2.1-Providing and fixing in position pre-cast
R.C.C. manhole cover and frame of required shape and approved quality 2.1. M D - 10
Square shape 450 mm internal dimension
HSR Rate(Rs.) 876.00 Through Rate
30
26280
876
HSR Item 4.16.1.2-Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 1.2. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
HSR Rate(Rs.) 62.00 Through Rate
511
31682
62
HSR Item 22.164.3-Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 3. 200 mm diameter S.W. pipe
HSR Rate(Rs.) 463.00 Through Rate
511.15
236662
463
HSR Item 21.90.4.1-Construction of rectangular standard brick masonry manhole chambers to standard drawings on
S.W. pipe sewers or other circular pipe sewers up to the required depth in 1.5 cement sand mortar, lime concrete in bed and sides of pipe sewer and cement concrete 1:2:4 in benching, 12 mm thick water tight 1:2 cement sand plaster with a floating coat of neat cement and finished with 2 coats of sodium silicate on interior surface where required, reinforced cement concrete slab 180mm thick fixing 560 mm internal diameter C.I. manhole cover and frame weight not less than
2.5 quintal painted with 3 coats of black bitumen paint, fixing galvanised malleable iron steps embedded in 1:2 cement sand mortar complete. the rate covers the cost of M.S. steel for R.C.C. slab labour for fixing and carriage of C.I. manhole frame and cover and malleable iron steps from the stores of the Engineer-in-charge of the works to the site of works. The rate also include the cost of accurately planned and fitted centring, supports for all works as well as for all curves and special work, cleaning out their beds etc. sodium silicate shall be supplied free of cost at the stores of the Engineer-in- charge. 4.1. On 200 mm internal diameter pipe sewer - for
1.80 meters depth below ground level
HSR Rate(Rs.) 13917.00 Through Rate
16
222672
13917
HSR Item 21.93.1-Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including
setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge. 1.
Type:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening
HSR Rate(Rs.) 1155.00 Through Rate
26
30030
1155
HSR Item 6.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2442.00 Through Rate
1
2442
2442
NS Item -Providing and fixing SFRC MANHOLE IC COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1 :3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge.
Rectangular 450x600x80 mm (Heavy Duty)
73
90666
1242
Sub-Component :- Rain Water Harvesting
-
-
-
HSR Item 6.16-Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). HSR Rate(Rs.) 6113.00 Through Rate
9.66
59076
6113
HSR Item 6.30.3-Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform
HSR Rate(Rs.) 208.00 Through Rate
69.55
14465
208
HSR Item 4.12.1-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer- in-charge. 1. All kinds of soil
HSR Rate(Rs.) 78.00 Through Rate
523.28
40815
78
HSR Item 4.31.1-Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 1. All kinds of soil
HSR Rate(Rs.) 51.00 Through Rate
514.23
26225
51
HSR Item 4.32-Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. HSR Rate(Rs.) 46.00 Through Rate
523.28
24070
46
HSR Item 6.1.1-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 3975.00 Through Rate
3.78
15041
3975
HSR Item 6.1.4-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 4. 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 2911.00 Through Rate
0.45
1309
2911
HSR Item 33.15-Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading and sizes as per actual requirement, all complete as per direction of Engineer-in- charge.
HSR Rate(Rs.) 1166.00 Through Rate
17.49
20393
1166
HSR Item 33.14-Supplying, filling, spreading and levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads and lifts, all complete as per direction of Engineer -in-charge.
HSR Rate(Rs.) 1039.00 Through Rate
7.63
7925
1039
HSR Item 11.6.1-15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) HSR Rate(Rs.) 102.00 Through Rate
218.03
22239
102
HSR Item 9.58.5.3-Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.3.
Bend 87.5°
150 mm bend
HSR Rate(Rs.) 129.00 Through Rate
12
1548
129
HSR Item 10.100.1-Cement Concrete 1:8:16 Flooring 1. Cement Concrete 1:8:16 with Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size in foundation and plinth. HSR Rate(Rs.) 1727.00 Through Rate
11.35
19601
1727
HSR Item 11.5.3-12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)
HSR Rate(Rs.) 84.00 Through Rate
218.03
18314
84
HSR Item 21.93.1-Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including
setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge. 1.
Type:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening
HSR Rate(Rs.) 1155.00 Through Rate
6
6930
1155
HSR Item 33.9.2-Supplying, assembling, lowering and fixing in vertical position in bore well Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of Engineer-in- charge. 2. 150 mm nominal size dia
HSR Rate(Rs.) 642.00 Through Rate
90
57780
642
HSR Item 22.198.1-Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 1. With 20x20 mm square bar
HSR Rate(Rs.) 243.00 Through Rate
30
7290
243
HSR Item 22.200.2-Supplying and fixing C.I. cover without frame for manholes : 2. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
HSR Rate(Rs.) 2702.00 Through Rate
9
24318
2702
HSR Item 33.18.2-Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). 2. 150 mm dia
HSR Rate(Rs.) 236.00 Through Rate
3
708
236
HSR Item 33.16.2-Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 2. 150 mm dia
HSR Rate(Rs.) 183.00 Through Rate
3
549
183
HSR Item 33.12-Supplying, filling, spreading and levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge.
HSR Rate(Rs.) 1039.00 Through Rate
19.41
20166
1039
HSR Item 33.13-Supplying, filling, spreading and levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads and lifts, all complete as per direction of Engineer-in- charge.
HSR Rate(Rs.) 1039.00 Through Rate
15.26
15850
1039
HSR Item 33.17.2-Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts and nuts of required size complete. 2. 150 mm clamp
HSR Rate(Rs.) 1191.00 Through Rate
3
3573
1191
HSR Item 33.8.2-Supplying, assembling, lowering and fixing in vertical position in bore well, Unplasticised PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 2. 150 mm nominal size dia
HSR Rate(Rs.) 594.00 Through Rate
240
142560
594
HSR Item 6.33.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 6. Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, weldedjoints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect for all heights/depths/storeys/basements etc. Note- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.
HSR Rate(Rs.) 66.00 Through Rate
180
11880
66
HSR Item 6.43-Providing, hoisting and fixing above plinth level up to floor four level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size).
HSR Rate(Rs.) 4174.00 Through Rate
0.18
751
4174
HSR Item 33.7.1.1-Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre and up to 150 metre depth below ground level. 1.1. All types of soil 300 mm dia
HSR Rate(Rs.) 596.00 Through Rate
330
196680
596
HSR Item 6.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2442.00 Through Rate
2.18
5323
2442
HSR Item 7.21.1-Brick work with common burnt clay non- modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) HSR Rate(Rs.) 3693.00 Through Rate
69.22
255614
3693
HSR Item 9.57.3-Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 3. 150 mm diameter
HSR Rate(Rs.) 269.00 Through Rate
30
8070
269
Sub-Component :- Boundary Wall and Gate
-
-
-
NS Item -Making upto 50 mm dia holes for electrical light by core cutting up to 75 mm thick Red Sand stone slabs etc and sealing with Drip seal sealant complete in all respect as per direction of Engineer in charge. (HSR Derived Rate)
224
19488
87
HSR Item 7.99.1-Stone work, plain in copings, cornices, string courses and plinth courses, up to 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 1. Red sand stone
HSR Rate(Rs.) 15110.00 Through Rate
15.79
238511
15110
HSR Item 6.30.5-Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers
HSR Rate(Rs.) 296.00 Through Rate
2054.3
608073
296
HSR Item 11.9.1-15 mm cement plaster on rough side of single or half brick wall of mix: 1. 1:4 (1 cement: 4 coarse sand)
HSR Rate(Rs.) 139.00 Through Rate
3166.41
440131
139
HSR Item 11.8.1-12 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand)
HSR Rate(Rs.) 82.00 Through Rate
3395.44
278426
82
HSR Item 11.37.1-Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:
1. In one coat
HSR Rate(Rs.) 132.00 Through Rate
498.1
65749
132
HSR Item 4.32-Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. HSR Rate(Rs.) 46.00 Through Rate
1352
62192
46
HSR Item 7.57-Dressed or moulded two brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required.
HSR Rate(Rs.) 166.00 Through Rate
704.51
116948
166
HSR Item 7.58-Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required.
HSR Rate(Rs.) 75.00 Through Rate
708.96
53172
75
HSR Item 8.27.1-Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 1. Marble work
HSR Rate(Rs.) 134.00 Through Rate
773.43
103639
134
HSR Item 6.16-Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). HSR Rate(Rs.) 6113.00 Through Rate
43.59
266441
6113
HSR Item 6.30.6-Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts
HSR Rate(Rs.) 262.00 Through Rate
1420.4
372143
262
HSR Item 6.33.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 6. Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, weldedjoints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect for all heights/depths/storeys/basements etc. Note- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.
HSR Rate(Rs.) 66.00 Through Rate
57144.71
3771550
66
HSR Item 11.95.1-Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
HSR Rate(Rs.) 88.00 Through Rate
7300.45
642439
88
HSR Item 11.78-Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
HSR Rate(Rs.) 31.00 Through Rate
481.89
14938
31
HSR Item 4.14.1-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil.
HSR Rate(Rs.) 83.00 Through Rate
1352.13
112226
83
HSR Item 11.60-Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
HSR Rate(Rs.) 59.00 Through Rate
7150.45
421876
59
HSR Item 6.14.1-Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III): 3 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 4374.00 Through Rate
317.7
1389637
4374
HSR Item 6.15.1-Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 5969.00 Through Rate
103.23
616161
5969
HSR Item 6.30.1-Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete
HSR Rate(Rs.) 156.00 Through Rate
667.67
104156
156
HSR Item 7.22.1-Brick work with common burnt clay non- modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in
: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)
HSR Rate(Rs.) 3877.00 Through Rate
470.63
1824620
3877
HSR Item 11.10.1-20 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand)
HSR Rate(Rs.) 129.00 Through Rate
338.82
43707
129
HSR Item 13.29.2-Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
HSR Rate(Rs.) 83.00 Through Rate
17260.43
1432615
83
HSR Item 11.54-Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. HSR Rate(Rs.) 31.00 Through Rate
3567.68
110598
31
HSR Item 8.7.1.2-Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 1.2. Wedge expansion type
Fastener with threaded dia 10 mm
HSR Rate(Rs.) 21.00 Through Rate
2660
55860
21
HSR Item 6.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2442.00 Through Rate
149.53
365149
2442
HSR Item 2.B0936- B0936. Ball bearing for rolling shutters
HSR Rate(Rs.) 232.00 Rate
10
2320
232
Sub-Component :- Parking Shed
-
-
-
HSR Item 6.15.1-Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 5969.00 Through Rate
10.73
64059
5969
HSR Item 4.14.1-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil.
HSR Rate(Rs.) 83.00 Through Rate
285.43
23691
83
HSR Item 11.60-Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
HSR Rate(Rs.) 59.00 Through Rate
415.26
24500
59
HSR Item 6.1.2-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 3476.00 Through Rate
3.16
10998
3476
HSR Item 11.9.1-15 mm cement plaster on rough side of single or half brick wall of mix: 1. 1:4 (1 cement: 4 coarse sand)
HSR Rate(Rs.) 139.00 Through Rate
166.11
23089
139
HSR Item 13.30.1-Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes
HSR Rate(Rs.) 105.00 Through Rate
19419
2038995
105
HSR Item 11.54-Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. HSR Rate(Rs.) 31.00 Through Rate
363.32
11262
31
HSR Item 13.31-Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
HSR Rate(Rs.) 66.00 Through Rate
949.51
62667
66
HSR Item 11.78-Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
HSR Rate(Rs.) 31.00 Through Rate
718.84
22284
31
HSR Item 6.30.5-Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers
HSR Rate(Rs.) 296.00 Through Rate
221.48
65558
296
HSR Item 9.33-Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( plus 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
HSR Rate(Rs.) 504.00 Through Rate
1428.38
719905
504
HSR Item 6.14.1-Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III): 3 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 4374.00 Through Rate
72.14
315557
4374
HSR Item 6.30.1-Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete
HSR Rate(Rs.) 156.00 Through Rate
58.53
9130
156
HSR Item 6.33.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 6. Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, weldedjoints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect for all heights/depths/storeys/basements etc. Note- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.
HSR Rate(Rs.) 66.00 Through Rate
7237.97
477706
66
HSR Item 6.30.6-Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts
HSR Rate(Rs.) 262.00 Through Rate
304.35
79739
262
HSR Item 7.21.1-Brick work with common burnt clay non- modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) HSR Rate(Rs.) 3693.00 Through Rate
37.97
140234
3693
HSR Item 11.95.1-Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
HSR Rate(Rs.) 88.00 Through Rate
415.26
36543
88
HSR Item 11.8.1-12 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand)
HSR Rate(Rs.) 82.00 Through Rate
249.17
20431
82
HSR Item 6.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2442.00 Through Rate
42.2
103054
2442
Sub-Component :- Horticulture
-
-
-
HSR Item 26.10-Maintenance of fine grass lawn for one year including fertilizer application, DAP @ 20gm/sqm, urea 40gm/sqm, watering, weeding, top dressing with good earth and manure mixture 2:1 @ 0.01cum per sqm, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads.
HSR Rate(Rs.) 45.00 Through Rate
5200
234000
45
HSR Item 26.293-Providing and Displaying Ficus reginold well developed fresh and healthy foliage 60 to 75 cm spread 105 to 120 cm ht., Bushy plant in 35 cm Cement Pot as per direction of the officer-in- charge.
HSR Rate(Rs.) 424.00 Through Rate
20
8480
424
HSR Item 26.9.1-Turfing lawns with fine grassing ( selection no.1/ Bermuda and Mexican/Neelgiri grass )including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying of selection no. 1 / Bermuda doob grass and Mexican/Neelgiri grass roots, including supplying and spreading of farmyard manure at the rate of
0.60 cum per 100 sqm, maintenance till weed free turf is formed 1. Planting selection no. 1 grass roots in rows 5 cm apart in both directions .
HSR Rate(Rs.) 54.00 Through Rate
5200
280800
54
HSR Item 26.7-Grassing of play grounds with doob grass including uprooting rank vegetation and weeds by digging area to a depth of 30 cm , removing all weeds and other growth with roots by forking repeatedly, ploughing and dragging with ‘swagha’ breaking of clods, removal of rubbish, dressing and supplying doob grass roots, and planting at 10 cm apart in both directions , watering weeding including supplying and spreading of farm-yard manure at the rate of
0.18 cum per 100 sqm fertilizers DAP 50 g per sqm etc and maintenance till weed free turf is formed
HSR Rate(Rs.) 21.00 Through Rate
1000
21000
21
HSR Item 26.20-Supply and Planting rare and specimen tree plants in already prepared pits (Ficus starlight 150 cm height , Terminalia 210 cm height, menatalis , Michelia champaca hybrid more than 180 cm height, Cyprus (Golden juniperous ) more than 180 cm height, topiary of 10 to 12 no. well trimmed bolls of more than 30cm size of Ficus nuda, Ficus retusa, Ficus long island , Ficus panda more than 180 cm height, Golden bottle brush , casurina equistefolia , Bottle palm with stem circumference at base more than 40cm ,Washingtonia palm of healthy clear stem height below leaf more Thant 90 cm ) including , fertilizer and insecticides chlorpyriphos 20 ml per pit, planting of 180cm to 210cm tall sapling in position and flooding with water .specie of plant will be decided by engineer in charge.
HSR Rate(Rs.) 999.00 Through Rate
300
299700
999
HSR Item 26.14-`Supplying and planting in prepared pits and watering, healthy , vigorous growing , permanent trees including ,application of 10 ml chlorpyriphos 20% EC, planting desired disease free, 200 cm to 220 cm height ,5 cm to 6 cm calliper size stem , full of foliage ornamental tree sapling
each to be supplied in 30cm x 30cm poly bags,
`
HSR Rate(Rs.) 157.00 Through Rate
100
15700
157
HSR Item 26.21-Maintenance of specimen tree for one year including weeding, hoeing , plant protection , watering from Deptt. source , application of 20 ml chlorpyriphos four times, 0.0289 cum FYM each,50 gm urea and 50 gm DAP twice
,replacement of casualty ,disposal of debris and other activities.etc.
HSR Rate(Rs.) 582.00 Through Rate
300
174600
582
HSR Item 26.19.2-Maintenance of shrub for one year including weeding, hoeing, plant protection, watering from Deptt. source, application of 10 ml chlorpyriphos four times in a year , 0.0289cum FYM each, 20 gm urea and 20 gm DAP twice, replacement of casualty etc. with same species and same age of plant 2. Shrubs planted in groups making continuous block.
HSR Rate(Rs.) 289.00 Through Rate
100
28900
289
HSR Item 26.27-`Maintenance of ground cover plants for one year including application of FYM 0.0508 cum , insecticide 10ml, fertilizer 20 gm ,per sqm, replacement of casualty with same specie of plant and all horticultural practices.
`
HSR Rate(Rs.) 180.00 Through Rate
70
12600
180
HSR Item 26.35-Maintaining the hedges for one year including watering, hoeing weeding trimming and shaping
,replacement of casualty as and when noticed, application of Farm yard manure @ 0.0127 m layer over surface, application of insecticide chlorpyriphos @ 2ml per sqm twice , urea @40gm and DAP @10 gm per sqm once in a year.
HSR Rate(Rs.) 245.00 Through Rate
400
98000
245
HSR Item 26.22.1-Planting seasonal flower in beds 1. Supply and planting flower beds including digging 30 cm deep bed and refilling of beds with excavated soil and FYM 0.0508 cum per sqm , Fertilizer DAP 50 gms and insecticides chlorpyriphos 10 ml per sqm , planting of F1 hybrid flower saplings to be supplied in tray pots / thumb pots at 20 cm distance from plant to plant and row to row minimum 25 no . plants per sqm
HSR Rate(Rs.) 213.00 Through Rate
100
21300
213
HSR Item 26.30-Supplying healthy, well branched, well bloomed and Planting rose beds including digging 30 cm deep bed and refilling of beds with excavated soil and FYM 0.0508 cum per sqm , Fertilizer DAP 50 gms and insecticides chlorpyriphos 10ml per sqm , planting of hybrid Budded rose saplings to be supplied in earthen pots /20cm x20cm
polybags , planting of sapling at 45 cm distance from plant to plant and row to row and 5 no. plants per sqm
HSR Rate(Rs.) 159.00 Through Rate
50
7950
159
HSR Item 26.40.7-Providing 1st quality heavy duty plastic pot with base plate at site of work, filling with mixture of good earth and screened manure and coco peat in the ratio 2:1:1 7. 45 cm size of pots filled to 2/3rd volume.
HSR Rate(Rs.) 296.00 Through Rate
250
74000
296
HSR Item 26.470-Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in 35 cm HDPE bag as per direction of the officer-in-charge.
HSR Rate(Rs.) 104.00 Through Rate
100
10400
104
HSR Item 26.128-Providing and displaying of Dracaena song of India specimen plant (three in one), having ht. 60 cm and above, well developed, fresh and healthy with good foliage in 20 cm size of Earthen pot/Plastic pot and as per direction of the officer-in-charge.
HSR Rate(Rs.) 159.00 Through Rate
100
15900
159
HSR Item 26.370-Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in 35 cm HDPE bags as per direction of the officer-in- charge.
HSR Rate(Rs.) 208.00 Through Rate
100
20800
208
HSR Item 26.4.11-SITE CLEARANCE 11. Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation
HSR Rate(Rs.) 3.00 Through Rate
5200
15600
3
HSR Item 26.413-Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in 35 cm HDPE bags as per direction of the officer-in-charge.
HSR Rate(Rs.) 260.00 Through Rate
100
26000
260
HSR Item 26.407-Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in 30 cm HDPE Bag as per direction of the officer-in-charge.
HSR Rate(Rs.) 104.00 Through Rate
10
1040
104
HSR Item 26.15.1-Maintenance of tree including fertilization, application of insecticide, watering, weeding, training, pruning,
1. Maintenance of tree for one year for the 1st three years of age including weeding, hoeing , plant protection , watering from Deptt. source , application of 10 ml chlorpyriphos four times, 0.0289 cum FYM each,50 gm urea and 50 g DAP twice
,replacement of casualty ,disposal of debris and other activities.etc.
HSR Rate(Rs.) 391.00 Through Rate
320
125120
391
HSR Item 26.28-`Supply and planting healthy disease free 30 cm to 45 cm height ground cover of rare species plants .i.e. Rasselia, Chlorophytum, Juniperous prostata, Asparagus grass, cuphea chinensis, ipomea, Portulacaria (Jade plant)Zebrina Trades Cantia etc ) including digging 30 cm deep bed and refilling of beds with excavated soil and FYM 0.075cum per sqm , Fertilizer DAP 100 gms and insecticides chlorpyriphos 10ml per sqm , planting of saplings of rare specie of plants to be supplied in 20cm x 20cm ` polybags with full of leaves and in healthy condition at 30cm distance from plant to plant and row to row minimum 15 no. plants per sqm ,and watering
`
HSR Rate(Rs.) 408.00 Through Rate
70
28560
408
HSR Item 26.97-Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot and as per direction of the officer-in-charge.
HSR Rate(Rs.) 242.00 Through Rate
80
19360
242
HSR Item 26.157-Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot and as per direction of the officer-in-charge.
HSR Rate(Rs.) 242.00 Through Rate
100
24200
242
HSR Item 26.161-Providing and displaying of Rhapis palm specimen plant, having ht. 1.50 m to 1.65 m with 40 to 50 lush green suckers, well developed, fresh and healthy foliage leaves in 40 cm size of Earthen Pot/Chali/Tray and as per direction of the officer-in-charge.
HSR Rate(Rs.) 597.00 Through Rate
80
47760
597
HSR Item 26.102-Providing and displaying of Areca Palm plant, having ht. 1.05 m to 1.20 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot and as per direction of the officer-in-charge.
HSR Rate(Rs.) 190.00 Through Rate
100
19000
190
HSR Item 26.299-Providing and Displaying Furcaira variegated well developed with fresh and healthy foliage 8 to 10 leaves in 30 cm Earthen Pot as per direction of the officer- in-charge.
HSR Rate(Rs.) 254.00 Through Rate
55
13970
254
HSR Item 26.2-Supplying and stacking of good quality top layer garden earth free from debris and weeds, at site including royalty and carriage/lead 5 km (good earth measured in stacks will be reduced by 20 % for payment) only for filling of pots and flower beds . 0.00 0.00 0.00
HSR Rate(Rs.) 302.00 Through Rate
840
253680
302
HSR Item 26.13.4-Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) 4. Hole 0.60 metre dia and
0.60 metre deep
HSR Rate(Rs.) 11.00 Through Rate
2720
29920
11
HSR Item 26.501-Providing and stacking of Tecoma gaudichaudi of height 60-75 cm. with 5-6 branches in p.bag of size 25 cm as per direction of the officer-in-charge.
HSR Rate(Rs.) 58.00 Through Rate
120
6960
58
HSR Item 26.459-Providing and stacking of Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm as per direction of the officer-in-charge. HSR Rate(Rs.) 63.00 Through Rate
200
12600
63
HSR Item 26.513-Providing and stacking Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Polybag and as per direction of the officer-in- charge. .
HSR Rate(Rs.) 46.00 Through Rate
100
4600
46
HSR Item 26.426-Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
HSR Rate(Rs.) 87.00 Through Rate
10
870
87
HSR Item 26.464-Providing and stacking of Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.
HSR Rate(Rs.) 23.00 Through Rate
150
3450
23
HSR Item 26.493-Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 90-105 cm.,bushy in 35 cm size HDPE bag as per direction of the officer-in-charge.
HSR Rate(Rs.) 92.00 Through Rate
150
13800
92
HSR Item 26.367-Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
HSR Rate(Rs.) 70.00 Through Rate
30
2100
70
HSR Item 26.3.1-Supplying at site good earth /soil-less media and/ or organic matter, preparation of top dressing mixture or pot media 0.00 0.00 0.00 1. Supplying at site of work well- decayed farm-yard manure from any available source, approved by the Engineer-in-charge including screening through sieve of I.S.designation 16 mm with 5 km lead and supply of good earth making mixture in ratio of 1:2
HSR Rate(Rs.) 427.00 Through Rate
50
21350
427
HSR Item 26.4.12-SITE CLEARANCE 12. Fine dressing the ground
HSR Rate(Rs.) 2.00 Through Rate
5600
11200
2
HSR Item 26.4.1-SITE CLEARANCE 1. Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material, lead up to 50m and lift up to 1.5 m, disposed material to be neatly dressed
HSR Rate(Rs.) 260.00 Through Rate
50
13000
260
HSR Item 26.4.10-SITE CLEARANCE 10. Rough dressing the trenched ground including breaking clods. 0.00 0.00
HSR Rate(Rs.) 1.00 Through Rate
66
66
1
HSR Item 26.34-Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth, mixed with farm-yard manure, supplied at the rate of 1.62 cum per 18 sqm, DAP 0.6kg, Chlorpyriphos 20%EC@ 0.20 litre per 18 sqm and supplying and planting hedge at 30 cm apart in two rows @ 202 no. well trimmed bushy ,multi-branched ,30 cm to 45 cm in height plants to be supplied in 15 cm x 15 cm poly bags per 18 sqm .
HSR Rate(Rs.) 230.00 Through Rate
400
92000
230
HSR Item 26.8-Maintenance of grassy grounds including fertilizer application of 50 g DAP and 50 g Urea, watering, weeding, top dressing with good earth and manure mixture @ 0.0125 cum, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads.
HSR Rate(Rs.) 21.00 Through Rate
1000
21000
21
HSR Item 26.45-Maintenance of indoor potted plants for one year including watering, application of fertilizer NPK 20:20:20 @20 gm ,and vermi compost 50 gm , manure, snowcem/ apex every month, replacement of pot plate, broken pot, dead plant with same specie of plant etc.
HSR Rate(Rs.) 216.00 Through Rate
250
54000
216
HSR Item 26.23-Maintenance of flower beds for one year including , application of FYM 0.050 cum , insecticide 10 ml, fertilizer 50 gm ,per sqm , planting F1 Hybrid flower seedlings to be supplied in Plastic tray pots/thumb pots in winter, summer and rainy season @ 20cm apart row to row and plant to plant, 25 no. plants per sqm each time each season stacking with Kaanas and including all horticultural practices. HSR Rate(Rs.) 490.00 Through Rate
100
49000
490
HSR Item 26.31-`Maintenance of rose beds for one year including application of FYM 0.0289 cum, DAP 100gm
,insecticide chlorpyriphos 20% EC 10 ml, Fungicide Blitox/bavistin 20gm per sqm replacement of dead plants with same specie/quality of plant.
`
HSR Rate(Rs.) 140.00 Through Rate
50
7000
140
E.I. (HSR) PART
-
-
-
HSR Item 23.8.10.1-FITTING AND ACCESSORIES 10.1.
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all espects. 1 & 2 Modules including combined plate for Telephone and data
HSR Rate(Rs.) 93.00 Through Rate
303
28179
93
HSR Item 23.8.11.3-FITTING AND ACCESSORIES 11.3.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 1 way switch HSR Rate(Rs.) 82.00 Through Rate
44
3608
82
HSR Item 20.71.2-Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge
2. 56" (1400mm)
HSR Rate(Rs.) 2361.00 Through Rate
20
47220
2361
HSR Item 23.22.4.12-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 4.12. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 12 way ( 8 incoming 3phase*12 outgoing)
HSR Rate(Rs.) 10817.00 Through Rate
8
86536
10817
HSR Item 7.22.1-Brick work with common burnt clay non- modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in
: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)
HSR Rate(Rs.) 3877.00 Through Rate
7
27139
3877
HSR Item 23.4.1.1-COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.1.
Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A
HSR Rate(Rs.) 520.00 Through Rate
168
87360
520
HSR Item 23.4.5.1-COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.1.
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A
HSR Rate(Rs.) 999.00 Through Rate
30
29970
999
HSR Item 23.7.6.2-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in all/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia.
HSR Rate(Rs.) 32.00 Through Rate
7200
230400
32
HSR Item 23.3.6.1-COPPER WIRING IN PVC CONDUIT
(SURFACE/RECESS) 6.1. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm)
HSR Rate(Rs.) 88.00 Through Rate
11000
968000
88
HSR Item 23.7.6.3-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.3. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all espect up to the entire satisfaction of Engineer-in-Charge of ork. PVC pipe of 32 mm dia.
HSR Rate(Rs.) 45.00 Through Rate
700
31500
45
HSR Item 23.8.10.2-FITTING AND ACCESSORIES 10.2.
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 Modules
HSR Rate(Rs.) 127.00 Through Rate
124
15748
127
HSR Item 23.9-Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work.
HSR Rate(Rs.) 109.00 Through Rate
6
654
109
HSR Item 23.22.4.3-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 4.3. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 12 way ( 2 incoming and 10 outgoing)
HSR Rate(Rs.) 1706.00 Through Rate
9
15354
1706
HSR Item 23.22.4.7-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 4.7. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing)
HSR Rate(Rs.) 3958.00 Through Rate
16
63328
3958
HSR Item 20.72-Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge.
HSR Rate(Rs.) 1339.00 Through Rate
64
85696
1339
HSR Item 23.8.11.7-FITTING AND ACCESSORIES 11.7.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt
HSR Rate(Rs.) 257.00 Through Rate
436
112052
257
HSR Item 23.8.11.8-FITTING AND ACCESSORIES 11.8.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Telephone Socket outlet modular type
HSR Rate(Rs.) 75.00 Through Rate
29
2175
75
HSR Item 23.4.1.3-COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.3.
Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group C
HSR Rate(Rs.) 710.00 Through Rate
1523
1081330
710
HSR Item 23.8.11.11-FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type
HSR Rate(Rs.) 304.00 Through Rate
31
9424
304
HSR Item 23.8.4-FITTING AND ACCESSORIES 4. Supply
and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job.
HSR Rate(Rs.) 95.00 Through Rate
436
41420
95
HSR Item 20.71.1-Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge
1. 48" (1200mm)
HSR Rate(Rs.) 2054.00 Through Rate
403
827762
2054
HSR Item 23.4.2.3-COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 2.3.
Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group C
HSR Rate(Rs.) 922.00 Through Rate
15
13830
922
HSR Item 23.4.5.3-COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.3.
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group C
HSR Rate(Rs.) 1292.00 Through Rate
191
246772
1292
HSR Item 23.22.5.1-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole
HSR Rate(Rs.) 145.00 Through Rate
802
116290
145
HSR Item 23.22.5.3-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE
HSR Rate(Rs.) 426.00 Through Rate
6
2556
426
HSR Item 23.22.5.6-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 5.6. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs TRIPLE POLE
HSR Rate(Rs.) 1038.00 Through Rate
16
16608
1038
HSR Item 23.22.1.9-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in- charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA HSR Rate(Rs.) 6130.00 Through Rate
8
49040
6130
HSR Item 23.22.5.8-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE
HSR Rate(Rs.) 1291.00 Through Rate
10
12910
1291
HSR Item 23.8.11.1-FITTING AND ACCESSORIES 11.1.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp 1 way switch HSR Rate(Rs.) 41.00 Through Rate
437
17917
41
HSR Item 23.8.11.4-FITTING AND ACCESSORIES 11.4.
Providing and fixing modular type accessories of approved ake in existing box including fixing and making necessary connections, complete in all respect. 5 amp Socket HSR Rate(Rs.) 82.00 Through Rate
438
35916
82
HSR Item 23.8.11.5-FITTING AND ACCESSORIES 11.5.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 6 pin Socket HSR Rate(Rs.) 124.00 Through Rate
45
5580
124
HSR Item 23.8.11.10-FITTING AND ACCESSORIES 11.10.Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Blanking plate
HSR Rate(Rs.) 18.00 Through Rate
423
7614
18
HSR Item 23.8.1.12-FITTING AND ACCESSORIES 1.12.
Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Bakelite angle/straight button holder large size.
HSR Rate(Rs.) 46.00 Through Rate
332
15272
46
HSR Item 23.8.11.9-FITTING AND ACCESSORIES 11.9.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. T.V. Socket outlet modular type
HSR Rate(Rs.) 75.00 Through Rate
92
6900
75
HSR Item 23.7.6.4-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.4. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of ork. PVC pipe of 40 mm dia. HSR Rate(Rs.) 57.00 Through Rate
200
11400
57
HSR Item 23.21-Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling , including cutting/making hole in ceiling including making connections etc as required
HSR Rate(Rs.) 48.00 Through Rate
450
21600
48
HSR Item 23.20-Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required
HSR Rate(Rs.) 67.00 Through Rate
1241
83147
67
HSR Item 24.5.2.7-MISCELLANEOUS ITEMS 2.7. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 180/150 mm outer dia/ inner dia HSR Rate(Rs.) 343.00 Through Rate
320
109760
343
HSR Item 23.4.4.1-COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.1.
Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group A
HSR Rate(Rs.) 725.00 Through Rate
48
34800
725
Sub-Component :- Electrical NS ITEM
-
-
-
NS Item -Supply and erection of 10 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable .Make:- as per HPHC approved Brand List WITHOUT GST.....
600
55200
92
NS Item -Supply and erection of 1.5 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable .Make:- as per HPHC approved Brand List without gst. ......
8500
123250
14.5
NS Item -SUPPLY AND INSTALLATION OF PVC HARD
DRAIN pipe including elbow, Tee etc. for Air Conditioner complete in all respect.WITHOUT GST
150
25500
170
NS Item -SITC of fully stainless steel body 150 ltr cooling and 150 ltr storage capacity water cooler with 2 no taps, locking arrangement with 4 KVA 170/270 v rating copper wound stabilizer ( stabilizer as per HPHC approved brand list
12
612756
51063
NS Item -S/E of 4 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable .Make:- as per HPHC approved Brand List ( Without GST......
200
6250
31.25
NS Item -Supply and erection of 6 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable .Make:- as per HPHC approved Brand List WITHOUT GST....
200
8000
40
NS Item -NS- SITC of Commercial RO Capacity 50 LPH Complete with making necessary connection in all respect. Make - as per HPHC brand list. WITHOUT GST
12
467400
38950
NS Item -Supply of 18/20 watt rating 4 feet long LED Tube light Batten suitable for operation on 230 volt, 50 Hz supply. Make:- Havells or as per HPHC approved brand list....
265
56445
213
NS Item -Supply of 15` Exhaust fan (375mm) 900 RPM, Heavy Duty with louver shutter make Havells Model Turboforce or equivalent as per HPHC Brand list....
6
20886
3481
NS Item -Supply of 2`x2` 32 to 36 Watt Led ultra modern slim recess/surface mounting luminaire with high performance LEDs, suitable for mounting with Armstrong / Grid ceiling (35mm height) complete in all respect.. Make as per approved brand list of HPHC
530
1123070
2119
NS Item -Supply of LED 22 to 24 watt Square fitting ( 1`x 1`) size , surface / recess type. Make: as per HPHC approved brand list.....
446
646700
1450
NS Item -SITC of 1.50 TR wall mount split type air conditioning unit, 5 Star rating, Inverter technology 220 volts ( plus -10% ) single phase ,50 cycle per second electric supply, consisting of condensing and indoor unit, remote control, outdoor stand, suitable copper piping covered with insulation and first charge of refrigerant gas, complete in all respect. Make:- Hitachi Daikin or as per HPHC Brand List
51
1915050
37550
NS Item -S/E of Post Top lantern 25 to 35 watt suitable for 220 V, 50 Hz supply.Make :- Wipro or as per HPHC Brand List
4
20528
5132
NS Item -Supply and Erection of Copper refrigerant t Pipe with insulation and 4.0 sqmm 3 core Wiring complete in all respect (-)
103
96182
933.81
Sub-Component :- CCTV/ LAN WORK/ Lift work
-
-
-
NS Item -SITC of Uplink CAT6 UTP 24AWG PATCH
CORD:1M,Plug 30U` Snagless, ETL Channel Tested, UL and CE Certified Make: Commscope/RIT/Panduit/Norden.
104
23504
226
NS Item -SITC of 6 Zone Integrated PA Host with Digital Mixer Amplifier with 250W output,Amplifier should have Integrate FM tuner and Bluetooth, Amplifier must have minimum of 6 one output, with dedicated zone selector button and volume control, 4 line inputs, 1 line output, and 4 MIC inputs ,Treble and Bass control options, Output short circuit protection and alarm feature,Frequency response : 80Hz ~ 12kHz (±3dB)Distortion - THD (1.0%,Should have DC, overload, and short circuit protection, LED display for indicate volume, host status, program number, etc. Make:- Bosch/Norden/Sennheiser/Martin Audio/Shure
1
140625
140625
NS Item -Supply and laying of 2 core 1.5mm power cable reuted make
500
59000
118
NS Item -Supply installation of HDPE pipe by HDD at ground depth level 6 feet to 8 feet couplers, Dimensions of pipe:- The normal size of the pipe shall be 40/33mm, complete in all respect to the entire satisfaction of the engineer-in-charge.....
800
316800
396
NS Item -SITC of 6 KVA Online UPS Schneider SRV6K L- IN APC SRV 6000VA RT with SMF Batteries 12V, 26AH for 40 - 45 min of Backup. Battery Rack and Links for 12V, 26AH* 16 Make:-APC/Emerson/Numeric/Delta......
1
127462
127462
NS Item -SITC of Device side Patch corridor CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U` Snagless, ETL Channel Tested, UL and CE Certified.Make: Commscope/RIT/Panduit/Norden
40
10040
251
NS Item -SITC of Outdoor Waterproof Column Speaker 30W Make:- Bosch/Norden/Sennheiser/Martin Audio/Shure.....
4
247500
61875
NS Item -SITC of 6 Zone Remote Paging Microphone with Volume Control Make:- Bosch/Norden/Sennheiser/Martin Audio/Shure.......
2
219600
109800
NS Item -SITC of Access 24 port Switch plus 4SFP plus L2 Managed Switch. Make:-Cisco/Alcatel/Net gear/Zyxel
4
189608
47402
NS Item -Supply and Installation of Category 6 U/UTP Patch Cord LSZH 01m Make:-Cisco/Aleatel/net gear/Zyxel
144
32544
226
NS Item -Supply and Installation of Category 6 U/UTP Patch Cord LSZH 02m Make:-Cisco/Aleatel/net gear/Zyxel
80
20080
251
NS Item -SITC of Cat-6 UK Face Plate Plain 01 Port with SMB. Make:-Cisco/Aleatel/net gear/Zyxel
80
13440
168
NS Item -Supply and Installation of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded, UL and CE Certified as per Satisfaction of Engineer-IN-Charge Make:- Cisco/Aleatel/net gear/Zyxel
6
42684
7114
NS Item -SITC of Cat- 6 information outlet with category 6 UTP Keystone Jack Un Shuttered Punch Down 180 Deg. Make:-Cisco/Aleatel/net gear/Zyxel
80
18080
226
NS Item -SITC of 32U 600W x 600D Front Glass Door Single Section Wall Mount Cabinet,IP20 , 250 Kg Loading Capacity,Comply with ANSI/EIA RS- 310-D, DIN41494. IEC 297-2, GB/T3047. 2-92..OEM Should Comply to GFR 2017/Land Border Policy. OEM should be present and directly Registered in India from last 5 Years. Make:- Rittal/Panduit/Norden/Netrack.
1
46983
46983
NS Item -SITC of 24x 100/1000 Mbps Gigabit Copper RJ45 ports.4x Dual personaliy GbE ports (SFP 100/1000 Mbps or RJ-45 10/100/1000 Mbps Ports, 4x SFP plus 10G Ports, 1x DB-9 Femal console port, 1x 10/100Mbps RJ-45 outband management port, Support Dual redundant power supply from Day-1 as per Satisfaction of Engineer-IN-Charge. Make Cisco/Alcatel/Net gear/Zyxel
2
337692
168846
NS Item -SITC of Edge switch Racks 9U 550W x 500D Front Glass Door Single Section Wall Mount Cabinet,IP20 , 75 Kg Loading Capacity,Comply with ANSI/EIA RS- 310-D, DIN41494. IEC 297-2, GB/T3047. 2-92.OEM Should Comply to GFR 2017/Land Border Policy. OEM should be present and directly Registered in India from last 5 Years. Make:- Rittal/Panduit/Norden/Netrack.
4
40272
10068
NS Item -SITC of Enterprise SATA 4TB Surveillance HDD Make:-Seagate/WD/Toshiba
16
193296
12081
NS Item -SITC of 24 10/100/1000BASE-T PoE and 4
100/1000 Mbps SFP ports loaded with one RJ45 transciver, one SFP 1G Singlemode transciver, IEEE 802.3af/at compliance (for PoE ports),370W,SSL, Management VLAN, NTP,RADIUS, TACACS plus , RFC 2464, RFC 4213, RFC 4884, RFC 4861, Auto configuration , Static IPv6 default gateway , IPv6 duplicate address detection Dual configuration, 16k Mac Address, Dual image, Operating temperature: 0°C to 45°C.Should be provided with utility for Centralized and batch configurations ,IP configuration , IP renew , Device factory reset , Device reboot , Device locating , Web GUI access , Firmware upgrade , CE, FCC, C-Tick, 5 Years warranty. OEM Should be ISO 9001,14001 and ISO 45001 Certified. , Cloud Management Support to be Bundled along with Switch. All Switches and its Components from Same OEM.Make:-Cisco/Alcatel/Net gear/Zyxel
6
256734
42789
NS Item -SITC of flexible conduit pipe industrial grade 19mm size reputed make.
100
8400
84
NS Item -SITC of flexible conduit pipe industrial grade 25 mm size reputed make....
100
10000
100
NS Item -SITC of flexible conduit pipe industrial grade 32 mm size reputed make.
100
12600
126
NS Item -SITC of Blank Adapter Plate Make:- Commscope/RIT/Panduit/Norden.........
8
2152
269
NS Item -Supply, Installation, Testing, commissioning of IP Phone Type-2 IP Phone with Dual Gigabit Ethernet Enterprise Deskphone with Corded Handset , Dual stack NOE SIP , 3.5` 320X 240 color display , HD Audio , 2 USB -C and should support Integrated alphabetic keyboard to access to dial by name, text mail. Make:-Alcatel Lucent Enterprises/Tadiran/Avaya/Cisco
3
120342
40114
HSR Item 23.7.6.2-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all espect up to the entire satisfaction of Engineer-in-Charge of ork. PVC pipe of 25 mm dia. HSR Rate(Rs.) 32.00 Through Rate
1793
57376
32
NS Item -SITC of Cat-6 Information Outlet Category 6 UTP Keystone Jack Un Shuttered Punch Down 180Deg Make: Commscope/RIT/Panduit/Norden.
33
7458
226
NS Item -Supply Installation Testing and Commissioning of IP- PBX System Configured as per below with Expandable of up to 300 Extension.SIP Trunk - 30,IP-SIP Extension: 40,Attendant Console - 1, GUI Based Management system, Auto Attendant, Voicemail, Voice mail to e-mail for all users, Personal Assistant for all users, Built in Automatic Route Selection - Least cost routing, Remote Maintenance Facility, Web Based Managment Software. DISA and DOSA Facility,Rack Mountable System, Inbuit CTI integration,Inbuilt Cloud colboration,Should support WLAN/DECT Phones, Boss secretary function, 2 mins. Customizable music on hold , 3 X 3 party conference , 3000 directory entries (Dial by Name) , Support DECT Connectivity , External Caller Line Identification on BRA/PRI Lines Internal CLI on Digital Phones and Analog CLI Phones . Make:-Alcatel Lucent Enterprises/Tadiran/Avaya/Cisco
1
395790
395790
NS Item -Supply, Installation, Testing, commissioning of Workstation x Intel® i7® Processor (8 Cores/16 Threads, 3.0 GHz),16 GB RAM , 1 x NVIDIA T1000 (8 GB) Graphics Card, 500 GB SSD, Windows 10/11 Professional 64 Bit Operating System , 1x1Gbps NIC Card. Make:-Alcatel Lucent Enterprises/Tadiran/Avaya/Cisco
1
320911
320911
NS Item -SITC of Transceivers SFP Module Make:- Cisco/Alcatel/Net gear/Zyxel
6
25170
4195
NS Item -SITC of UK Face Plate Plain 01 Port with SMB
33
5544
168
NS Item -SITC of Rock Shaped Garden Speaker 20W. Make:- Bosch/Norden/Sennheiser/Martin Audio/Shure
8
378000
47250
NS Item -SITC of SC Singlemode Duplex Adapter Make:- Commscope/RIT/Panduit/Norden.....
24
6456
269
NS Item -SITC of CEILING SPEAKER 5.5` 6W Make:-
Bosch/Norden/Sennheiser/Martin Audio/Shure.....
33
44550
1350
NS Item -SITC of 2 x 250W 2 CHANNELS DIGITAL POWER AMPLIFIER.Make:- Bosch/Norden/Sennheiser/Martin Audio/Shure...
4
426204
106551
NS Item -Supply, Installation, Testing, commissioning of 24 Port PoE Switc 24 10/100/1000BASE-T PoE and 4 100/1000 Mbps SFP ports loaded with one RJ45 transciver, one SFP 1G Singlemode transciver, IEEE 802.3af/at compliance (for PoE ports),370W,SSL, Management VLAN, NTP,RADIUS, TACACS plus , RFC 2464, RFC 4213, RFC 4884, RFC 4861,
Auto configuration , Static IPv6 default gateway , IPv6 duplicate address detection Dual configuration, 16k Mac Address, Dual image, Operating temperature: 0°C to 45°C.Should be provided with utility for Centralized and batch configurations ,IP configuration , IP renew , Device factory reset , Device reboot , Device locating , Web GUI access , Firmware upgrade , CE, FCC, C-Tick, 5 Years warranty. OEM Should be ISO 9001,14001 and ISO 45001 Certified. , Cloud Management Support to be Bundled along with Switch. All Switches and its Components from Same OEM.Make:- Cisco/Alcatel/Net gear/Zyxel
1
45462
45462
NS Item -Supply, Installation, Testing, commissioning of 8 10/100/1000BASE-T PoE and 2 100/1000 Mbps SFP ports loaded with one RJ45 transciver, one SFP 1G Singlemode transciver, IEEE 802.3af/at compliance (for PoE ports),130W,SSL, Management VLAN, NTP,RADIUS, TACACS plus , RFC 2464, RFC 4213, RFC 4884, RFC 4861, Auto configuration , Static IPv6 default gateway , IPv6 duplicate address detection Dual configuration, 16k Mac Address, Dual image, Operating temperature: 0°C to 45°C.Should be provided with utility for Centralized and batch configurations ,IP configuration , IP renew , Device factory reset , Device reboot , Device locating , Web GUI access , Firmware upgrade , CE, FCC, C-Tick, 5 Years warranty. OEM Should be ISO 9001,14001 and ISO 45001 Certified. , Cloud Management Support to be Bundled along with Switch. All Switches and its Components from Same OEM. Make:- Cisco/Alcatel/Net gear/Zyxel.
4
103404
25851
NS Item -SITC o f CAT6 UTP 23AWG Solid:305M
LSZH/FRPVC as per Specifications. Commscope/RIT/Panduit/Norden.
8
97320
12165
NS Item -SITC o f Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded, UL and CE Certified.Commscope/RIT/Panduit/Norden.
1
7114
7114
NS Item -SITC o f Patch Panel Cat 6 UTP Keystone Type- 8 Port-Fully Loaded, UL and CE Certified.Commscope/RIT/Panduit/Norden.
4
13960
3490
NS Item -Supply and Laying of category 6 Unshielded 4 pair cable FRPVC as per satisfaction of enginer-IN-charge Make:- Commscop/RIT/Panduit/Norden.
10
153630
15363
NS Item -Supply, Installation, Testing, commissioning of IP Phone Type-1 Basic IP Phone with high quality audio, 2.3` black and white LCD with backlit, 2 SIP accounts, 2 Fast Ethernet ports, external power supply connector, RJ9 Headset connections, Cat-5E Ethernet Cable 3M, POE Class 1 Make:-Alcatel Lucent Enterprises/Tadiran/Avaya/Cisco
30
189870
6329
NS Item -SITC o f Indoor Rack 12U`9U 550W x 500D Front Glass Door Single Section Wall Mount Cabinet,IP20 , 75 Kg Loading Capacity,Comply with ANSI/EIA RS- 310-D, DIN41494. IEC 297-2, GB/T3047. 2-92.OEM Should Comply to GFR 2017/Land Border Policy. OEM should be present and directly Registered in India from last 5 Years.Make:- Commscope/RIT/Panduit/Norden
3
34752
11584
NS Item -SITC of SFP Module Transceivers. Make:- Cisco/Alcatel/Net gear/Zyxel
6
25170
4195
NS Item -SITC of Patch Panel Cat 6 UTP Keystone Type- 8 Port-Fully Loaded, UL and CE Patch Panel for Copper Connectivity to SwitchesCertified.
Make:-commscope/RIT/Panduit/Norden/Western
5
17450
3490
NS Item -Supply, Installation, Testing and Commissioning of 1/ 2.8 inch or better, CMOS and Progressive Scan and 2MP Bullet Camera. 1 ~ 1/32000 s or better, Automatic / Manua,l Lens 2.8mm/4mm, H.265 plus /H.265, H.264, Color: 0.01 lux @ F2.0/1.6, B/W: 0 lux with IR, Signal-to-Noise Ratio (SNR) 52dB, Day and Night functionality Automatic, Color, Mono, Internal Illuminator visibility of at least 30 meters, 2MP (1920x1080) and 720P (1280x720) @ 25/30 FPS, Wide
Dynamic Range Required, Configurable video streams (H.265 plus , H.265, H.264) Min 2 Streams, Perimeter, Crossing line/Tripwire, Motion detection, Tampering/Masking, Compatible Integration ONVIF profile S, G and T, SDK/API,SD Card:256GB or Better, The OEM of Camera should not be Banned/Blacklisted because of security concerns anywhere globally. Built in/External Mic Should be supported and provided. `-10°C ~ 60°C. IP67, IK10 with Built- in Surge Protection (Test reports required for IP67 and IK10). 12 V DC ±10%, PoE, Certifications UL, CE, FCC,IP67, IK- 10,OEM Cyber Security/Information Security Certificate,NDAA Compliant and BIS.OEM Should Have ISO 9001,14001,45001.Make:-Infinova/Bosch/Norden/Pelco/Axis
62
598238
9649
NS Item -Supply, Installation, Testing and Commissioning of 1/ 2.8 inch or better, CMOS and Progressive Scan and 2MP Dome Camera. 1 ~ 1/32000 s or better, Automatic / Manua,l Lens 2.8mm/4mm, H.265 plus /H.265, H.264, Color: 0.01 lux @ F2.0/1.6, B/W: 0 lux with IR, Signal-to-Noise Ratio (SNR) 52dB, Day and Night functionality Automatic, Color, Mono, Internal Illuminator visibility of at least 30 meters, 2MP (1920x1080) and 720P (1280x720) @ 25/30 FPS, Wide
Dynamic Range Required, Configurable video streams (H.265 plus , H.265, H.264) Min 2 Streams, Perimeter, Crossing line/Tripwire, Motion detection, Tampering/Masking, Compatible Integration ONVIF profile S, G and T, SDK/API,SD Card:256GB or Better, The OEM of Camera should not be Banned/Blacklisted because of security concerns anywhere globally. Built in/External Mic Should be supported and provided. `-10°C ~ 60°C. IP67, IK10 with Built- in Surge Protection (Test reports required for IP67 and IK10). 12 V DC ±10%, PoE, Certifications UL, CE, FCC,IP67, IK- 10,OEM Cyber Security/Information Security Certificate,NDAA Compliant and BIS.OEM Should Have ISO 9001,14001,45001.Make:-Infinova/Bosch/Norden/Pelco/Axis
19
183331
9649
NS Item -SITC of 6 Core OFC cable Singlemode OS2 Central Loose Tube Armoured External Cable Make:- Commscope/RIT/Panduit/Norden/Western
1000
53000
53
NS Item -SITC of SC/PC-SC/PC Singlemode OS2 3m Duplex LSZH Patch Cord Make:-Commscope/RIT/Panduit/Norden.
6
9060
1510
NS Item -SITC of 8 Port POE Switch 10/100/1000BASE-T PoE and 2 100/1000 Mbps SFP ports loaded with one RJ45 transciver, one SFP 1G Singlemode transciver, IEEE 802.3af/at compliance (for PoE ports),130W,SSL, Management VLAN, NTP,RADIUS, TACACS plus , RFC 2464, RFC 4213, RFC 4884, RFC 4861, Auto configuration , Static IPv6 default gateway , IPv6 duplicate address detection Dual configuration, 16k Mac Address, Dual image, Operating temperature: 0°C to 45°C.Should be provided with utility for Centralized and batch configurations ,IP configuration , IP renew , Device factory reset , Device reboot , Device locating , Web GUI access , Firmware upgrade , CE, FCC, C-Tick, 5 Years warranty. OEM Should be ISO 9001,14001 and ISO 45001 Certified. , Cloud Management Support to be Bundled along with Switch. All Switches and its Components from Same OEM.Make:-Cisco/Alcatel/Net gear/Zyxel
5
121650
24330
NS Item -SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded, UL and CE Certified Patch Panel for Copper Connectivity to Switches Make:- Commscope/RIT/Panduit/Norden/Western
6
42684
7114
NS Item -SITC of Indoor Rack 12 U, 9U 550W x 500D Front Glass Door Single Section Wall Mount Cabinet,IP20 , 75 Kg Loading Capacity,Comply with ANSI/EIA RS- 310-D, DIN41494. IEC 297-2, GB/T3047. 2-92.OEM Should Comply to GFR 2017/Land Border Policy. OEM should be present and directly Registered in India from last 5 Years. Make:- Rittal/Panduit/Norden/Netrack/Western
11
127424
11584
NS Item -SITC of Uplink patch code CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U` Snagless, ETL Channel Tested, UL and CE Uplink Patch Cords Certified.
Make:-Commscope/RIT/Panduit/Norden/Western
168
37968
226
NS Item -SITC of Device side patch corridor CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U` Snagless, ETL Channel Tested, UL and CE Device Side Patch Corridor Certified Make:-Commscope/RIT/Panduit/Norden/Western
10
2510
251
NS Item -SITC of 12 Port LIU Fully loaded with pigtails and patch cord with coupler and tray Sliding Module Type Fibre Patch Panel Rack Mount Make:- Commscope/RIT/Panduit/Norden/Western
4
22152
5538
NS Item -SITC of SC/PC Singlemode OS2 1.5m LSZH Pigtail Make:Commscope/RIT/Panduit/Norden.
48
15312
319
NS Item -SITC of LFD/Professional Display Screen or 55` LED Commercial Screen. Make LG/Panasonic/Delta or as per HPHC Brand List
2
154688
77344
NS Item -SITC of 64Ch or Better Upgradable to 80Ch Embedded (on single Box or redundant box) Network Video Recorder with support of 8 HDD Bays (support up to 10TB per bay), 8MP Resolution Cameras, 2 HDMI, 1 VGA, RAID 5 ,Smart analytics, ONVIF (S, G and T), Alarm Interface (4 In/ 2 Out), Audio Interface (1 In/ 1 Out), 2xUSB 2.0, 2xRJ45 10/100/1000 Mbps LAN interface,RS485, Rack Mounted. Certifications - CE, FCC and BIS,UL. Cyber Security/Information Security Certificate. NDAA Compliant Declaration.Make:-Infinova/Bosch/Norden/Pelco/Axis/ Tekwin/Hyunda.....
2
463118
231559
NS Item -Supply of SC 3 Port Duplex Adaptor Plate Make:- Commscope/RIT/Panduit/Norden.....
8
2152
269
NS Item -SITC and putting into operation and final testing of following barrier free Gearless Machine shall be placed within the lift shafts ( MRL) complete with all standard equipments, accessories and control equipments as per manufactures design and as per latest NBC and fulfilling following requirements on turn key basis Lifts must have ARD unit as per latest norms of Haryana govt. the agency will register / inspection the lift from the lift inspector and all the expenses of insurance, registration etc will be bear by agency. Elevator Specifications:- Number of Persons 20 HAVING 3 STOPS. Rated Load 1360 kg Number of stops/opening:- 3 Number of Access sides:- 1 Floor designations , 1 ,2,3 Drive:- AC VVVF Drive System for more power saving comfort and safe ride. Type of controller - high performance Simplex Full Collective control system. Speed of travel 1.00 meter /sec Car Design, Car door center opening automatic 1200 mm wide x 2000 mm height, front glass doors with S.S. moon rock frame , doors. Car walls finish in Stainless Steel Hairline LED spot in ceiling, Car doors:- Center opening automatic door (full vision glass door with SS Scratch Resistance Frmae. finish in Stainless Steel Hairline, car emergency light battery operated, emergency alarm, emergency stop operation, voice announcing system for car, overloading warning device, automatic rescue device, Car door in Stainless steel finish, Granite Flooring on heavy duty M.S. plateform as per approved by HPHC Decorative False Ceiling with LED lights Blower/ rotor motor , finish in Stainless Steel Mirror 304 Full height mirror on rear car panel,Braile buttons Car Operating Panel Stylish, touch sensitive glass panel, Fireman switch safety device, 3 side railing as per elevator and escalator and as per engineers satisfaction Door open/close and alarm buttons . Make- as per HPHC approved brand list.` Note:- Car size and door size may be veried according to actual available size of hoist way......
2
4132944
2066472
NS Item -SITC and putting into operation and final testing of following barrier free Gearless Machine shall be placed within the lift shafts ( MRL) complete with all standard equipment, accessories and control equipment as per manufactures desing and as per latest NBC and fulfilling following requirements on turn key basis Lifts must have ARD unit as per lastest norms of Haryana govt. the agency will register / inspection the lift from the lift inspector and all the expenses of insurance, registration etc will be bear by agency. Elevator Specifications:- Number of Persons 13 HAVING 3 STOPS Rated Load 884 kg Number of stops/opening:- 3 Number of Access sides:- 1 Floor designations , 1 ,2,3 Drive:- AC VVVF Drive System for more power saving comfort and safe ride.Type of controller - high performance Simplex Full Collective control system. Speed of travel 1.00 meter /sec Car Design, Car door center opening automatic 900 mm wide x 2000 mm height, front glass doors with S.S. moon rock frame , doors. Car walls finish in Stainless Steel Hairline LED spot in ceiling, Car doors:- Center opening automatic door (full vision glass door with SS Scratch Resistance Frmae. finish in Stainless Steel Hairline, car emergency light battery operated, emergency alarm, emergency stop operation, voice announcing system for car, overloading warning device, automatic rescue device, Car door in Stainless steel finish Granite Flooring on heavy duty M.S. plateform as per approved by HPHC Decorative False Ceiling with LED lights Blower/ rotor motor , finish in Stainless Steel Mirror 304 Full height mirror on rear car panel,Braile buttons Car Operating Panel Stylish, touch sensitive glass panel, Fireman switch safety device, 3 side railing as per elevator and escalator and as per engineers satisfaction Door open/close and alarm buttons . Make- as per HPHC approved brand list.` Note:- Car size and door size may be veried according to actual available size of hoist way.....
1
1734300
1734300
Sub-Component :- FIRE FIGHTING WORK
-
-
-
NS Item -SITC of Auto Glow Exit Signs and indication signs of Size 12”x 4”and Attack Fire, DP indication every exit point, Fire Point, Fire Extinguisher complete in all respect.
20
29640
1482
NS Item -Providing and fixing of ISI marked (IS: 15683) portable AFFF foam type fire extinguisher, Capacity 9 liter complete in all resp. ( Make :-Atasee/Minimax/MEC/Kanex)
6
41796
6966
NS Item -Providing and making drainage provision for the wet riser with 50mm dia MS (heavy duty) pipe, ball valve, fittings etc. as required maximum length of pipe 2 mtr.
4
53100
13275
NS Item -Providing and fixing of ISI marked (IS: 2878) portable Co2 fire extinguisher of capacity 22.5 kg flat base including valve discharge hose of not less than 10mm dia. meter complete in all respect including initial fill with Co2 gas confirming to IS 307-1966 and filled to filling ratio of not more than 0.367. (Atasee/Minimax/Kanex)
4
99860
24965
NS Item -SITC OF DOL type fire pump panel suitable for 900 lpm fire pump 415 V plus /-6 volts,panel shall be free standing floor mounting sheet metal enclosed dust and verming proof.Panel shall be provided with heat shrinkable sleeves and shall be coloour coded. The panel shall be suitable for cable entry from top or bottem. The minimum fault rupturing for all incoming and outgoing switch/ breakers shall be 35 KA. The panel shall be fabricated.Auto mannual Starters with change over system
1
56025
56025
NS Item -Providing and fixing of ISI marked (IS: 15683) portable Co2 fire extinguisher of capacity 4.5 kg flat base including valve discharge hose of not less than 10mm dia. meter complete in all respect including initial fill with Co2 gas confirming to IS 307-1966 and filled to filling ratio of not more than 0.367. Make (Atasee/Minimax/Kanex)
20
212960
10648
NS Item -Providing and Fixing of weather proof standard fire hose cabinet (750 mm x 600 mm x 300 mm deep) for yard hydrants made of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish with ` Fire Hose` marked on front, suitable for housing 2 nos. Hose pipe, 1 No. branch pipe and nozzle spanner. (For external hydrant system).( Make :- NEWAGE/ATASEE/ OMEX/SWASTIK)
20
84380
4219
NS Item -Providing and fixing M.S. structural work fabricated from standard sections, ( ISI Mark MS rounds, angles, channels etc.) including cutting to size, drilling welding including cost of fasteners clamps in R.C.C. structural members as directed, including two or more coats of synthetic enamel paints over one coat of primer after surface preparation including cutting and making good walls..
1000
96000
96
HSR Item24.10.2 -CIVIL ITEMS (USED COMMONLY IN
ELECTRICAL WORKS) 2. Earth work in excavation in foundations, trenches etc. in all kind of soils, not exceeding 2
etres depth including dressing of bottom and sides of trenches, staking the excavated soil clear from the edge of excavation and subsequent filling around masonry, in 15cm layers with compaction, including disposal of all surplus soil, as directed with in a lead of 30 metres.
HSR Rate(Rs.) 137.00 Through Rate
24
3288
137
NS Item -Providing and fixing of ISI marked (IS: 15683) portable ABC multipurpose mono monioum phosphate powder , nitrogen pressurised type fire extinguisher, Capacity 6 kg complete in all resp. (Atasee/Minimax/Kanex)
20
130500
6525
HSR Item22.181 -Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
HSR Rate(Rs.) 7.00 Through Rate
20000
140000
7
HSR Item24.1.12 -EARTHING AND LIGHTENING
ARRESTOR 12. Supplying and laying 6 S.W.G G.I. wire at
0.50 m below ground level from earth electrode including thimbles, soldering etc. as required.
HSR Rate(Rs.) 127.00 Through Rate
50
6350
127
HSR Item23.26.4 -SAFETY ITEMS 4. Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6x4 made of GI pipe 32mm dia).
HSR Rate(Rs.) 2739.00 Through Rate
2
5478
2739
HSR Item24.10.1 -CIVIL ITEMS (USED COMMONLY IN
ELECTRICAL WORKS) 1. Digging & refilling of trench 30 cm ide below ground level for erection of pipe/cable (up depth of 1 Metre. underground cable excluding the cost of cable/pipe complete in all respect.
HSR Rate(Rs.) 179.00 Through Rate
80
14320
179
HSR Item34.23 -Hume pipe road indicator of 350mm dia NP-2 hume pipe 1200mm high, 900mm above ground level, 300mm embedded in ground in cement concrete 1:4:8 of size 0.75x0.75x0.60m, filled with earth and plugged from top with 300mm thick cement concrete 1:2:4, painted with two coats ready mixed exterior paint in black and white strips fixed in position complete as per PWD specifications
HSR Rate(Rs.) 1199.00 Through Rate
80
95920
1199
NS Item -Providing and fixing air release valve of 25 mm dia and 25 mm dia gun metal gate valve with fittings etc. to be installed at risers. (Make :- Kartar / Zoloto/ Beer/
4
10576
2644
NS Item -Providing and fixing of ISI marked (IS: 13886) trolley mounted fire extinguisher, AFFF Mechnical foam type (gas pressurized) Capacity 50 liter complete in all respect. (Atasee/Minimax/Kanex)
4
90404
22601
NS Item -Supply and fix MS Cabinet ( apporx 750mm x 600mm x 450 mm ) to encl fire brigade inlet connection fabricated from 16 gauge sheet with full front glass door and locking arrangement painted and mounted on masonry platform complete.( Make :- NEWAGE/ATASEE/ OMEX/SWASTIK)
1
8156
8156
NS Item -Supply, erection, testing and commissioning of fire brigade draw off connection confirming to IS : 4038-1986 with 150 mm Non return valve/ strainer incluiding necessary fittings the word FIRE BRIGADE DRAW OFF to be painted on the box complete all as specified and directed.( Make :- NEWAGE/ATASEE/ OMEX/SWASTIK)
1
10519
10519
NS Item -Fabrication, Supply, installation, testing and commissioning of Electrical control panel of cubical construction floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged locked doors, dust and vermin proof, powder coated of approved shade after 7 tanki treatment process. cable alley, inter-connection with suitbale size copper conducter cable/soil copper strip, having switchgears and
1
269302
269302
accessories mountings and internal wriing, earth, terminals, numbering etc. complete in all respect suitable for main pump pressursation pump and diesel pump set complete as per CPWD specification with following in coming and Outging suitable for operation on 415 V, 3 phase, 4 wires, 50 Hz power distribution system. Supply with enclosure protection class IP 42 as rquired.Adequate size cable alley shall be provided all round the panel and in the back for each cable bending and termination. The panel shall be fabricated by CPRI/TAC/Fire authority approved vendor. The outgoing feeders inside the panel shall be connected through solid bus bars.Flexible cable links are not acceptable.Bus bars shall be provided with heat shrinkable sleeves and shall be colour coded. The panels shall be suitable for cable entry from top. The minimum fault rupturing of all incoming and outgoing switches/breakers shall be 35 KA. The panels shall be fabricated after the approval of fabrication drawings.Main Fire Pump Panel:
Incoming Section:
i) One (1) No. 400A TPN MCCB (35 KA), 500 Amps Aluminium bus bar shall be insulated with heat shrinkable sleeves and shall be color coded.current transformer (400/5A).One (1) No. ammeter (0-800) Amps with selector switch.,One (1) No. (0-500 V) voltmeter with selector switch, Set (3 Nos) of phase indication lamps with HRC fuses. Indication for control supply healthy`.Outgoing:1 Nos. 400 A TPN MCCB 35 KA. 1 NOS., 1 NoS. 63 A TPN MCCB 25 KA.One(1) No. star delta Starters complete with . ON/OFF, indication lamp, contactors ammeter with suitable C.T`s, sufficient nos. of potential free spare contacts, etc. suitable for 75 HP motor.Wiring from pressure switch to starter - Lot,One (1) No. DOL Starter with single phase protection feature. ON/OFF, indication lamp, contactors ammeter with suitable C.T`s, sufficient nos. of potential free spare contacts, etc. suitable for 15 HP motor. Set of control system to make the system automatic as per functional requirements.Wiring from pressure switch to starter – LotProvision for starting the diesel engine fire pump with battery charger for trickle and boost charging. The diesel engine driven fire pump shall start automatically in the
event of pressure drop beyond preset limit on mains failure or failure of electrical driven pumps to start.One (1) no. pressure switch. Wiring from pressure switch to Diesel engine control panel,
-
-
-
control panel,
Note:
Separate neutral link to be provided wherever TP MCCB are used,Following provisions to be made in the fire panel, Audio visual alarm and indications having disconnect/reset facility with a range of 1/2 km. Annunciator to be provided in the Fire panel with hooter and acknowledge, test and reset PBs. The indication shall come on when electrical driven pump set fails to start on pressure drop or when there is power failure during pressure drop,Facility for mode selection ie auto or manual test and local/remote,Protection failure and control cabling.Panel shall be interlocked in such a way when fire pump starts on pressure drop in the header, supply to working chiller A/c panel is disconnected,Remote indication of ON/OFF/ TRIP shall be provided through potential free contact, Provision of remote starting/ stopping (manual) of the engine shall be made.
-
-
-
NS Item -Supply, laying, testing and commissioning of 2. 2 core x 1.5 sqmm fire alarm armoured cable 600/1100v rated with annealed copper cundoctor having XLPE insulation, steel wire armouring and FRLS outer sheath complete as required. ( Make :- Polycab / Havalls/ Finolex/ RR kabel /KEI)
4500
562500
125
NS Item -Supplying, installation, testing and commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate and suitable for operation with amplifier i/c line matching transformer etc. complete as require. 10 Zone contral panel for Fire alarm systm.(ASES/Agni)...........................
3
152829
50943
NS Item -Supplying, installation, testing and commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate and suitable for operation with amplifier i/c line matching transformer etc.complete as required.( (ASES/Agni)
26
10478
403
NS Item -Supplying, installation, testing and commissioning of manual call point of MS constrution in surface /reces with stainless steel chain and Hammer assembly complete as required. ( (ASES/Agni)
26
8918
343
NS Item -Supply, Installation Testing and Commissioning of Heat detector operating at 54/57 with rate of rise cum fixed tempreature type with mounting base complete with all connection (Make: (ASES/Agni))
25
19375
775
NS Item -Supply, Installation Testing and Commissioning of Smoke Detector with builtin LED and mounting base complete with all connections etc. As required. (ASES/Agni)
325
271375
835
NS Item -Supply, erection, testing and commissioning of 4 WAY fire brigade inlet connection to wet riser system which comprises of 3 No. 63 mm dia Gun metal NRV, 1 No. powder coated weather proof standard hose box suitable for accommodating the above components fabricated out of 16 SWG MS sheet with central opening, glazed front incluiding necessary fittings the word FIRE BRIGADE DRAW OFF to be painted on the box complete all as specified and directed.(Make:- NEWAGE/ATASEE/ OMEX/SWASTIK))
1
10114
10114
NS Item -Supplying and Fixing first-aid Hose Reel with MS constrution spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 40 Mtr. length x 20 mm dia high pressure water hose type -2 as per IS: 12585. (b) Gun metal (GM) shut off nozzle having 5 mm dia orifice.(c) Connectings from riser ith 25mm dia M.S. pipe connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required.( Make :- NEWAGE/ATASEE/OMEX/SWASTIK)......................
12
104856
8738
NS Item -Supply and fix 63 mm dia SS Branch pipe with 20mm nozzle confirming to IS 903.( Make :- NEWAGE/ATASEE/ OMEX/SWASTIK)
20
24040
1202
NS Item -Providing and Fixing of 63 mm dia 15 m long non- percolating flexible hose (RRL- type A) as per IS : 636. Type A with 63 mm Dia GM male and female instantaneous type coupling (IS 903) (For internal hydrant system).( Make :- NEWAGE/ATASEE/ OMEX/SWASTIK)
40
128760
3219
NS Item -Providing and Fixing S.S.Single headed internal Hydrant Valve instantaneous ISI marked oblique pattern hydrant landing valves with 80mm dia flanged inlet and 63 mm dia female outlet complete with cap and GI chain twist release type plugh and all accessories as per IS : 5290-1983 Type A (For interna plus external hydrant).( Make :- NEWAGE/ATASEE/ OMEX/SWASTIK)............
20
110680
5534
NS Item -Supply, fixing, testing and commissioning of pump exhaust M. S. pipe class `C` 150 mm dia (50mm thick including fitting like flanges, bends, reducers, etc. duly insulated with the fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold settting adhesive (CPRX compond) wraping with 500g polythene moulded faced hessin and finly applying 0.63mm aluminum cadding, 21 gauge, necessary excavation, fixing of silencer connections at engine exhaust, necessary supports, back filling, cutting and making good, bird proof and weather proof flap complete in all espect as directed. (Make :- Jindal / Surya / Swastik
12
41976
3498
NS Item -Providing, fixing, testing and commissioning industrial type position pressure gauge with gun metal including brass isolation valve and pipe having caliberation of 0-15 Kg/cm2.( Make H-Guru)
5
4990
998
NS Item -Providing, fixing, testing and commissioning of 150 mm dia 6.35 mm thick flanged end basket 300mm height of Y-type strainer made from MS body with bottom and top removable flanges with nuts, bolts etc having filteration area at least 6 times the cross sectional area of the pipe. ( Make
:- Bir / Kartar / Zoloto / Sant )..........
2
16130
8065
NS Item -Suppy and fixing Air vessel made of 250mm dia x 1200mm high with air release valve top and flanged connection to riser, drain arrangement with 25mm dia gunmetal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
13204
13204
NS Item -Supply, installation, testing and commissioning of Pressure switch in MS Pipe line connection etc as required. (Make :- Danfoss/ Indfos)
2
2238
1119
NS Item -Supply, installation, testing and commissioning Electric driven Terrace pump of suitable for automatic operation and consisting of following complete in all respects, as required (1) Horizontal mounted end suction jockey pump having cast iron body, volute bronze impeller, stainless shaft mechnical seal conforming to IS 1520, (2) Suitable HP squirell cage induction motor TEFC type suitable for operation on on 3 phase, 415 volts, 50 Hz AC supply with IP55 class of protection for enclosure, horizental foot mounted type with Class- `F` insulation, conforming to IS-325. (3) MS common base phase of suitable size coupling guard air vent for casting pessure guages on delivery side and pipe etc. 900 LPM capacity at 35 mtrs head pressure not less than 3.5 kg/sq cm ( Make: kirloskar/ Crompton/ KSB/Lubi )
1
73718
73718
NS Item -Supplying, installing, testing and commissioning of electrically driven Jockey pump suitable for automatic operation consisting of the following:orizontal mounted end suction jockey pump having cast iron body, volute bronze impeller, stainless shaft capable
of delivering 180 LPM against total head of 70 M while running at 2900 RPM complete in all respect. for testing of orking of the pumping set as required.quirrel cage induction motor suitable for 415 plus 10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above pump with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling and coupling guard .Common bed plate for mounting pump and motor fabricated of mild steel channel as per manufacturer`s recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy foot) Make: kirloskar/ Crompton/ KSB/Lubi .
1
74763
74763
NS Item -Supplying, installing, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operations and consisting of the following complete in all respects, as required: orizontal type multistage centrifungal pump having cast iron body, bronze impeller, stainless steel shaft mechnical seal conforming to IS 1520, 2850 LPM against a total head of 70 M while running at 1500 RPM complete in all respect.Radiator cooled diesel engine of suitable BHP at 1500 RPM for the above pump complete with standard accessories and suitable cooling system as described in specifications.Common base plate for mounting pump and engine of requisite strength manufactured out of M.S. channels as per manufacture`s recommendation with heavy duty Anti Vibration pads. (Cushy foot) Coupling and coupling guard for direct coupling of engine and pump. 200 liters capacity day oil storage tank fabricated from 16 SWG thick M.S. plates. Tank shall be provided with inlet, outlet, overflow, vent, drain connections, filling connection and level indicator. Tank shall be mounted on a suitable steel structure (Painted with 2 coats of red oxide paint). Tank shall be provided with epoxy coat from inside and two or more coats of synthetic enamel paint outside over two coats of red oxide primer.24 olts 180 AH lead acid battery (12 volts - 2 Nos) with boost/Trickle charger for starting the engine automatically complete as required.Provision for starting of Engine automatically in case of power failure at the time of fire Make: kirloskar/ Crompton/ KSB/Lubi.
1
446513
446513
NS Item -Supplying, installing, testing and commissioning of Electrical driven fire pump suitable for automatic/ manual operation consisting of the following:Horizontal type , multistage centrifugal, split casing pump of cast iron body, bronze impeller with stainless steel shaft, mechnical seal conforming to IS 1520.Squirrel cage, induction motor TEFC type suitable for 415 plus 10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating for the above pump with synchronous speed of 2900 RPM with flexible coupling and coupling guard .Common bed plate for mounting pump and motor fabricated of mild steel channel as per manufacturer`s recommendation with heavy duty Anti Vibration pads.Coupling and coupling guard for direct coupling of pump and motor. Make: kirloskar/ Crompton/ KSB/Lubi Main Fire Pump and Sprinkler Pump Discharge: 2850 LPM App. Head : 70 M.
1
292985
292985
NS Item -Providing, fixing, testing and commissioning of C class heavy class MS pipe, confirming to IS : 1239 marked with all necessary fittings like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc. welded or screwed joints as equired including fixing wall and ceiling suitable supports and Painting with Two or more coat synthetic enamel paint of required shade [ Location : Plant room]. (Make :- Jindal / Surya / Swastik )..size 200 mm dia (6.35 mm thick) with necessary support etc as required (Nominal Bore)
80
316320
3954
NS Item -Providing, fixing, testing and commissioning of C class heavy class MS pipe, confirming to IS : 1239 marked with all necessary fittings like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc. welded or screwed joints as required including fixing wall and ceiling suitable supports and Painting with Two or more coat synthetic enamel paint of required shade (Location Plant room). (Make :- Jindal / Surya
/ Swastik )...size 50 mm dia
6
5562
927
NS Item -Providing, fixing, testing and commissioning of C class heavy class MS pipe, confirming to IS : 1239 marked with all necessary fittings like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc. welded or screwed joints as required including fixing wall and ceiling suitable supports and Painting with Two or more coat synthetic enamel paint of equired shade (Location Plant room). (Make :- Jindal / Surya
/ Swastik )...size 65 mm dia
6
7008
1168
NS Item -Providing, fixing, testing and commissioning of C class heavy class MS pipe, confirming to IS : 1239 marked with all necessary fittings like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc. welded or screwed joints as equired including fixing wall and ceiling suitable supports and Painting with Two or more coat synthetic enamel paint of required shade (Location Plant room). (Make :- Jindal / Surya
/ Swastik )...size 25mm dia
12
6456
538
NS Item -Providing, fixing, testing and commissioning of C class heavy class MS pipe, confirming to IS : 1239 marked ith all necessary fittings like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc. welded or screwed joints as required including fixing wall and ceiling suitable supports and Painting with Two or more coat synthetic enamel paint of required shade (Location Plant room). (Make :- Jindal / Surya
/ Swastik )...size 150mm dia
500
1293500
2587
NS Item -Providing, fixing, testing and commissioning of C class heavy class MS pipe, confirming to IS : 1239 marked with all necessary fittings like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc. welded or screwed joints as required including fixing wall and ceiling suitable supports and Painting with Two or more coat synthetic enamel paint of required shade (Location Plant room). (Make :- Jindal / Surya
/ Swastik )...size 100mm dia
100
185000
1850
NS Item -Providing, fixing, testing and commissioning of C class heavy class MS pipe, confirming to IS : 1239 marked with all necessary fittings like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc. welded or screwed joints as required including fixing wall and ceiling suitable supports and Painting with Two or more coat synthetic enamel paint of equired shade (Location Plant room). (Make :- Jindal / Surya
/ Swastik ) Size 80 mm dia
100
136400
1364
NS Item -Providing, fixing, testing and commissioning of C.I. Butterfly valve conforming to IS : 13095 with flanges, nuts, bolts and washers complete for following sizes :- [PN 1.6 rating]. Make :- Bir /Kartar / Zoloto / Sant ) size 50 mm dia
1
2739
2739
NS Item -Providing, fixing, testing and commissioning of C.I. Butterfly valve conforming to IS : 13095 with flanges, nuts, bolts and washers complete for following sizes :- [PN 1.6 rating]. Make :- Bir /Kartar / Zoloto / Sant ) size 65 mm dia
1
3113
3113
NS Item -Providing, fixing, testing and commissioning of C.I. Butterfly valve conforming to IS : 13095 with flanges, nuts, bolts and washers complete for following sizes :- [PN 1.6 rating]. Make :- Bir /Kartar / Zoloto / Sant ) size 80 mm dia
21
75726
3606
NS Item -Providing, fixing, testing and commissioning of C.I. Butterfly valve conforming to IS : 13095 with flanges, nuts, bolts and washers complete for following sizes :- [PN 1.6 rating]. Make :- Bir /Kartar / Zoloto / Sant ) size 100 mm dia
10
48250
4825
NS Item -Providing, fixing, testing and commissioning of C.I. Butterfly valve conforming to IS : 13095 with flanges, nuts, bolts and washers complete for following sizes :- [PN 1.6 rating]. Make :- Bir /Kartar / Zoloto / Sant ) size 150 mm dia
14
90790
6485
NS Item -Providing, fixing, testing and commissioning of non- return valve complete with nuts, bolts and washers.( Make :- Bir / Kartar / Zoloto / Sant ) size 100 mm dia
3
24063
8021
NS Item -Providing, fixing, testing and commissioning of non- return valve complete with nuts, bolts and washers.( Make :- Bir / Kartar / Zoloto / Sant ) size 80 mm dia
1
5566
5566
NS Item -Providing, fixing, testing and commissioning of non- return valve complete with nuts, bolts and washers.( Make :- Bir / Kartar / Zoloto / Sant ) size 65 mm dia
1
4646
4646
NS Item -Providing, fixing, testing and commissioning of non- return valve complete with nuts, bolts and washers.( Make :- Bir / Kartar / Zoloto / Sant ) size 50 mm dia..........................
1
4191
4191
NS Item -Supply and making end termination with brass compression glands and aluminim lugs for the following PVC insulated, PVC sheathed and 1100 V grade Aluminium cable including cost of crimping lugs/ferrules, compression glands, solder, cable sockets, insulation tape etc complete as required.Control cable Size 4C X 1.5 Sq.mm Make:- Polycab, Grandlay, Havells
36
3132
87
NS Item -Supply and making end termination with brass compression glands and aluminim lugs for the following PVC insulated, PVC sheathed and 1100 V grade Aluminium cable including cost of crimping lugs/ferrules, compression glands, solder, cable sockets, insulation tape etc complete as required.Control cable Size 3C X 35 Sq.mm Make:- Polycab, Grandlay, Havells
32
8160
255
NS Item -Supply and making end termination with brass compression glands and aluminim lugs for the following PVC insulated, PVC sheathed and 1100 V grade Aluminium cable including cost of crimping lugs/ferrules, compression glands, solder, cable sockets, insulation tape etc complete as equired.Control cable Size 3C X 95 Sq.mm Make:- Polycab, Grandlay, Havells
22
8624
392
NS Item -Providing laying ,testing and commissioning of ( C ) class heavy duty MS pipe conforming to IS IS 1239 /3589 i/c fitting like elbows ,tees ,flanges ,tapers ,nuts bolt , gaskets etc .in ground including welding ,excavation and providing cement concrete blocks as supports , anticorrosive treatment with coaltar /asphalt tape as per IS 10221 reffilling the trench etc .of following sizes complete as required (NS) size 150 mm dia
169
465257
2753
HSR Item24.1.2 -EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required.
HSR Rate(Rs.) 652.00 Through Rate
27
17604
652
HSR Item24.1.5 -EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.
HSR Rate(Rs.) 801.00 Through Rate
34
27234
801
HSR Item24.1.8 -EARTHING AND LIGHTENING ARRESTOR8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.
HSR Rate(Rs.) 96.00 Through Rate
440
42240
96
HSR Item24.1.9 -EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. HSR Rate(Rs.) 730.00 Through Rate
40
29200
730
HSR Item24.1.10 -EARTHING AND LIGHTENING
ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.
HSR Rate(Rs.) 730.00 Through Rate
80
58400
730
HSR Item23.22.1.3 -MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 1.3. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in- charge of the work. TRIPLE POLE MCCB 16 to 100 Amp, 25 KA
HSR Rate(Rs.) 4635.00 Through Rate
23
106605
4635
HSR Item24.2.4.4 -LT CABLE 4.4. Laying of underground cable in pipe /existing open/closed trench etc as required:- 185 sqmm to 240 sqmm 3 to 3½ Core
HSR Rate(Rs.) 25.00 Through Rate
350
8750
25
HSR Item6.1.6 -Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) HSR Rate(Rs.) 2442.00 Through Rate
2.04
4981
2442
HSR Item4.14.1 -Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift p to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil.
HSR Rate(Rs.) 83.00 Through Rate
2.04
169
83
HSR Item23.22.1.5 -MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 1.5. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in- charge of the work. TRIPLE POLE MCCB 200 to 250 Amp, 25 KA
HSR Rate(Rs.) 8577.00 Through Rate
13
111501
8577
HSR Item24.5.2.6 -MISCELLANEOUS ITEMS 2.6. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 145/123 mm outer dia/ inner dia.HSR Rate(Rs.) 297.00 Through Rate
900
267300
297
HSR Item32.70.2 -Supply Installation testing commissioning of Solar Photovoltaic grid connected roof top Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz plus /- 2.5 Hz, output voltage suitable to generate AC (c) Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit grid frequency (d) Data Monitoring System complete with accessories. (e) Fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.
(f) Lightning and surge voltage protection. (g) onnections and Interconnections by supplying and fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying and fixing of necessary channel/conduit lugs and other accessories etc. as required. 2. Above 10 kWp and up to 100 Kwp
HSR Rate(Rs.) 42902.00 Through Rate
42
1801884
42902
NS Item -Supply, erection, testing and commissioning of outdoor type 315 KVA, 11/0.433 KV transformer (As Per IS 1180 Part - 2) 2014 4 - star or as per latest specification of UHBVN/ DHBVN type, copper wound transformers 11 KV, 3 Phase, 50 cycle per second on plateform as per specification (to be installed outdoor on existing plateform of reqd. size excluding cost of plateform):cable box on HT / LT both sides, No load voltage ratio 11000/0.433 K Volts ,No of phase- 3,Frequency cycles - 50 Hz,Type : Double wound core type and copper woTapping on HV compensation 2.5% to 5% in steps of 2.5%und.,Colling - ONAN,Duty - outdoor,Vector group ISS DYN II/IS/2026/77,Fitting / accessories provides off circuit tape changer internally hand operated.,Oil conservator
ith fitting hole.,Plain oil level gauge with minimum level marking.,Thermostate pocket,4 nos. plain rollers undirectional, selica jel breather., 1st fitting of oil drum cum filter valve.,Ratting of diagram plate.,Two earth, terminals, Explosion vent, Air release plug., Temperature gauge, Temperature rise (oil/Res) 0*C to 50/55* C
1
714000
714000
HSR Item13.18 -Providing and fixing hard drawn steel wire fabric 75 mm X 25 mm rectangular mesh with 3.25 mm dia wire fixed on steel windows of standard rolled sections with 3 mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws welded complete in all respect.
HSR Rate(Rs.) 894.00 Through Rate
14.86
13284
894
HSR Item23.24.4.1 -MS STAND, BUS BAR CHAMBER AND
PANELS 4.1. Supply, installation, testing and commissioning of load bank with digital meter module cost of digital Amp. / volt meter with selector switch wiring ( but EXLUDING COST of incoming and outgoing MCCBs ) etc.suitable for operation of 240/415 volts A.C. Supply with both side cable allay, inter connection and fixing the same in existing MS pedestal/wall complete with all labour and material required for the same up to the entire satisfaction of Engineer-in-Charge of work. Load Bank 4 way 250 amp.
HSR Rate(Rs.) 43169.00 Through Rate
5
215845
43169
HSR Item23.24.4.3 -MS STAND, BUS BAR CHAMBER AND PANELS 4.3. Supply, installation, testing and commissioning of load bank with digital meter module cost of digital Amp. / volt meter with selector switch wiring ( but EXLUDING COST of incoming and outgoing MCCBs ) etc.suitable for operation of 240/415 volts A.C. Supply with both side cable allay, inter connection and fixing the same in existing MS pedestal/wall complete with all labour and material required for the same up to the entire satisfaction of Engineer-in-Charge of work. Load Bank 4 way 400 amp.
HSR Rate(Rs.) 48467.00 Through Rate
1
48467
48467
HSR Item23.24.4.4 -MS STAND, BUS BAR CHAMBER AND PANELS 4.4. Supply, installation, testing and commissioning of load bank with digital meter module cost of digital Amp. / olt meter with selector switch wiring ( but EXLUDING COST of incoming and outgoing MCCBs ) etc.suitable for operation of 240/415 volts A.C. Supply with both side cable allay, inter connection and fixing the same in existing MS pedestal/wall complete with all labour and material required for the same up to the entire satisfaction of Engineer-in-Charge of work. Load Bank 8 way 400 amp.
HSR Rate(Rs.) 56621.00 Through Rate
1
56621
56621
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (16 sqmm 2 core armoured as per requirment). Make as per approved brand list of HPHC
200
20400
102
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power
Cable- Aluminium Conductor (120 sqmm 3.5 core armoured as per requirment). Make as per approved brand list of HPHC
60
35400
590
HSR Item24.4.10.4 -STREET LIGHT 10.4. Erection of RCC/
PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.
Above 8.0 metre and up to 11.0 metre
HSR Rate(Rs.) 2157.00 Through Rate
4
8628
2157
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (150 sqmm 3.5 core armoured as per requirment). Make as per approved brand list of HPHC
360
249480
693
HSR Item23.22.8.3 -MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 8.3. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 200 amp 415 volts
HSR Rate(Rs.) 14959.00 Through Rate
1
14959
14959
HSR Item24.1.3 -EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
HSR Rate(Rs.) 3368.00 Through Rate
26
87568
3368
HSR Item24.1.13 -EARTHING AND LIGHTENING
ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. HSR Rate(Rs.) 21.00 Through Rate
160
3360
21
HSR Item24.1.4 -EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.
HSR Rate(Rs.) 8275.00 Through Rate
8
66200
8275
HSR Item24.1.7 -EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.
HSR Rate(Rs.) 360.00 Through Rate
210
75600
360
NS Item -S/E of 3 phase auto matic street light controller with timer switch operation On/ off seetting up 24 hes at individual phase complete with 32 / 63 amp contactor and MS powder coated enlouser of suitable size and other petty material required to complete the job
2
14852
7426
NS Item -`ESE-TYPE LIGHTNING ARRESTER ESE lightning air terminal with the below technical parameters,- stainless steel material (304-L)- Suitable for corrisive environment - temparture 60 micro seconds.
METU lab tested as per NF C-17-102(2011) standard- CPRI tested for 70 KA (8/20 micro sec) = 1 no.
Lightning current= 100KA (10/350micro sec) tested 20 years arranty. Protection radius=107 mtrs.( Level IV/very high) Model: SIRIUS Make TOPBAS ( Turkey, Europe), /safesheild / KALRE). Lightning Counter = 1 no.
Supply 17.2mm dia copper bonded-soild electrode with 50kg chemical (25kgx2BAG) with tir-port and Pit cover. = 3 nos. 70 Sqmm single core pure copper cable with thimble ( make PoLYCAB, havells, grandlay, finolex or HPHC approved brand list. Aviation Lamp light with wiring = 1 no complete the work including installation charges OBO,JVL`
1
154963
154963
HSR Item24.2.4.2 -LT CABLE 4.2. Laying of underground cable in pipe /existing open/closed trench etc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core
HSR Rate(Rs.) 13.00 Through Rate
2000
26000
13
HSR Item24.2.4.3 -LT CABLE 4.3. Laying of underground cable in pipe /existing open/closed trench etc as required:- 50 Sq mm to 150 sqmm 2 to 4 Core
HSR Rate(Rs.) 21.00 Through Rate
1500
31500
21
HSR Item24.2.8.2 -LT CABLE 8.2. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 4 sqmm to 6 sqmm
HSR Rate(Rs.) 4.00 Through Rate
200
800
4
HSR Item24.2.8.5 -LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm
HSR Rate(Rs.) 10.00 Through Rate
100
1000
10
HSR Item24.2.8.6 -LT CABLE 8.6. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm
HSR Rate(Rs.) 11.00 Through Rate
150
1650
11
NS Item -Supply and erection of 11 KV G.O.D.O. Panel with 25x5 mm size copper bus- bar contacts including suitable
M.S. Stand Complete the all necessary connection in all respect.WITHOUT GST
1
40500
40500
NS Item -ABC Fire Extinguisher 4 KG included Labour and Fixing (MEC, Lifeline. WITHOUT GST
4
5760
1440
NS Item -SUPPLY AND ERECTION of HPole structure made out of 2 Nos. channel of size 100 mm x50mm x6mm 2.25 long, 6 Nos. M.S Channel of size 75 mmx40mmx6mm,0.75m long and 3Nos. M.S. angle iron 50 mm x50mmx6mm , 2.25 Mtr. For laying earth wire on existing PCC Poles i/c necessary M.S. Flat 50mmx6mm size clamps, nuts andbolts i/c painting complete in all respect with all labour and material required to complete the job upto entire satisfaction of E.I.C of the work. (Over all wt. of M.S. parts should not less than 193.5 kg.
1
20625
20625
HSR Item24.3.2.1 -HT CABLE 2.1. Laying and erection of XLPE II or 33 kv HT aluminium conductor armoured cable ISI mark laid on surface/pipe/cable tray with all labour and material as required
up to 120 sqmm 3 core XLPE Cable
HSR Rate(Rs.) 78.00 Through Rate
110
8580
78
NS Item -Supply and Erection of 6 IN 1 LT Energy Meter Panel madeout of 16 Gauge CRCA Sheet with Double door/Outdoor and locking arrangement consisting of Legs of MS angle iron size of 50x50x6 mm ,0.45 Mtr. Height,100 mm all around the panel 600 mm depth,1 no. FP 100 A ,25 kA Breaking Capacity.4 nos. Al. Bus Bar 38x6/Equi. Cross Section Area,MCB DP 63A -6 nos.,hollock, wooden Board,petty aterial,painting,making necessary connection., (Designs approved by UHBVN/DHBVN) Appx. Size 48x52x16 inch ( for 6 no energy meter) Complete in all respect. ( Without GST)
1
35425
35425
HSR Item23.26.4 -SAFETY ITEMS 4. Supply & Erection of ild steel bucket stand suitable for 6 Nos. fire buckets,(but ithout bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6x4 made of GI pipe 32mm dia).
HSR Rate(Rs.) 2739.00 Through Rate
1
2739
2739
HSR Item23.22.1.11 -MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 1.11. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in- charge of the work. 4 pole MCCB 200 to 250 amp, 25 KA HSR Rate(Rs.) 10809.00 Through Rate
5
54045
10809
HSR Item24.1.1 -EARTHING AND LIGHTENING ARRESTOR
1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
HSR Rate(Rs.) 2721.00 Through Rate
27
73467
2721
HSR Item9.59.2 -Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 2. 110 mm HSR Rate(Rs.) 147.00 Through Rate
400
58800
147
HSR Item24.5.2.4 -MISCELLANEOUS ITEMS 2.4. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.DWC/HDPE pipe 90/75 mm outer dia/inner dia
HSR Rate(Rs.) 161.00 Through Rate
1050
169050
161
HSR Item24.5.2.3 -MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.DWC/HDPE pipe 63/50 mm outer dia/inner dia.HSR Rate(Rs.) 124.00 Through Rate
1500
186000
124
HSR Item24.2.4.1 -LT CABLE 4.1. Laying of underground cable in pipe /existing open/closed trench etc as required:- 2.5 Sq mm to 10 Sq mm 2 to 4 Core
HSR Rate(Rs.) 9.00 Through Rate
300
2700
9
HSR Item24.2.8.3 -LT CABLE 8.3. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm
HSR Rate(Rs.) 6.00 Through Rate
80
480
6
HSR Item24.2.8.4 -LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm
HSR Rate(Rs.) 8.00 Through Rate
200
1600
8
HSR Item24.2.8.7 -LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm
HSR Rate(Rs.) 15.00 Through Rate
100
1500
15
NS Item -S/E of copper Bus-bar panel of size 450 mm x 1100 mm x 200 mm with 4 nos ( 1000mm length) copper bus-bar of size 38x6mm , suitable insulator complete in all respect
1
23900
23900
HSR Item23.26.3 -SAFETY ITEMS 3. Supply and erection of shock restoration chart in glass frame.
HSR Rate(Rs.) 262.00 Through Rate
4
1048
262
HSR Item23.26.2 -SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages.
HSR Rate(Rs.) 93.00 Through Rate
10
930
93
HSR Item23.26.1 -SAFETY ITEMS 1. Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages.
HSR Rate(Rs.) 76.00 Through Rate
12
912
76
HSR Item24.3.3.1 -HT CABLE 3.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm
HSR Rate(Rs.) 7149.00 Through Rate
6
42894
7149
HSR Item24.3.4.1 -HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm
HSR Rate(Rs.) 11516.00 Through Rate
20
230320
11516
NS Item -Supply and erection of R.D. fuses fixed on 2 Nos. channels of (set of 6 Nos) insulators pactel make size 75 mmx40 mmx6mm 2.25 mt. long with the help of suitable sizes of MS clamps, nuts and bolts i/c painting necessary connectiona and labour on existing pole complete in all respect. without GST
1
5219
5219
NS Item -Supply and erection of stay set suitable for 9 /11 Mts. Long PCC Pole made out of 7/8 SWG, GI Wire with U type M S. rod 5/8` dia duly threaded by means of angle iron of size 50 mm x 6mmx30 cm and 6 ft. long M.S. rod 5/8 dia 5` buried in the ground after fixing with cross channel of size 75mmx40mmx60cm.complete in all respect. WITHOUT GST
2
7550
3775
HSR Item9.31 -Providing and fixing Hi, Rib profiled sheets 0.60mm TT (Total Thickness) (only ± 0.2mm tolerance allowed) Hi Tensile galvalume/Zincalume steel sheet of the approved make having a hot dip metallic Zinc-Aluminium alloy (AZ-150) coating of minimum (150 gms/sqm) with 550 Mpa yield strength of approved blue colour (RAL-5012) the colour coating shall be as per IS 15965 of SMP or Super Durable Polyester Paint XRW fixed with hex head self-drilling screw sloping roof without curvature as per approved specification, drawing and design of the Corporation
HSR Rate(Rs.) 508.00 Through Rate
200
101600
508
HSR Item13.29.2 -Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
HSR Rate(Rs.) 83.00 Through Rate
100
8300
83
HSR Item24.7.2 -RCC FOUNDATIONS FOR DG SET 2. 60 to 90 KVA DG Set
HSR Rate(Rs.) 22159.00 Through Rate
1
22159
22159
HSR Item20.89.5 -`Designing, Supply and erection of DG set of capacity given below with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 plus (-)1% volts AC alternator coupled directly through a set
of flexible coupling on a common MS fabricated base frame ith diesel engine complete with suitable size incoming cable
from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge.
The rating should be at 1500 RPM.
a) Diesel Engine
b) Alternator
c) Battery 24 V.
d) Base Plate.
e) suitable sq mm suitable core copper cable upto 40 metres.
f) Tools, standard panel
g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT`s)
h) Metering set 60/5A/110V (Amp. Meter, Volt Meter)
i) Overload protection for DC-1 No.
j) Battery Charger 24V DC
k)Copper bus bar of suitable size
l) KWH meter 96 sqmm size
m) Starting fuse button and key switch9on/off)
n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, Dc control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge` 5. 62.5 KVA
HSR Rate(Rs.) 543634.00 Through Rate
1
543634
543634
HSR Item24.3.1.1 -HT CABLE 1.1. Laying and erection of XLPE (E)II kv HT aluminium conductor armoured cable 1 metre below ground level with sand & bricks with all labour and material including digging and refilling of trench as required up to 120 sqmm 3 core XLPE Cable
HSR Rate(Rs.) 179.00 Through Rate
500
89500
179
NS Item -Supply and erection of lightening arrestor model SDU suitable for 11 KV. 3 phase, 50 cycle, per second grounded neutal system comprising of spark gap type quench gap in service with no linear resistor element housed in along with mountering clamps and confirming to ISS -3070(Part-1) of 1988 with latest amendment on existing channels with labour and material required to complete the job in all respect upto entire satisfaction of Engineer-incharge of the work.
WITHOUT GST
1
3154
3154
HSR Item23.22.1.12 -MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 1.12. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in- charge of the work. 4 pole MCCB 300 to 400 amp , 50 KA HSR Rate(Rs.) 20350.00 Through Rate
2
40700
20350
HSR Item24.4.8.5 -STREET LIGHT 8.5. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge. 7 Metre Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm
HSR Rate(Rs.) 15685.00 Through Rate
40
627400
15685
HSR Item23.8.5 -FITTING AND ACCESSORIES 5. Supply
and erection 5-30 A single phase A.C. energy metre , LCD display and optical port , with rag bolts on wall/existing pedestal including the cost of rag bolts required to complete the job in all respect with necessary connections and bonding to earth.
HSR Rate(Rs.) 1715.00 Through Rate
6
10290
1715
NS Item -NS Item - SITC of cubical type dust and vermine proof H.T Metering panel free for standing floor mounting suitable for 11 kv 3 phase supply made out of 14 gauge MS sheet with channal from base frame painted with stoving synethic light gray enameled paint suitable for operation on 11az kv 3 phase 50 cycle system effective erthed system 1.) Cubical boxes approved by UHBVN/DHBVN of 14 SWG
MILD STEEL sheet with double door space and double meter arrangement 11 Kv epoxy testing of burden 10 VAA Class 0.5 2.) 3 nos C.T of required capacity of stova burden class 0.5 of approved make by as per aggrement list ofOne no PT11/kv/110 volts 3 phase oil cooled 10 va class 0.5 of make as approved make by UHBVN
3.) 2 No side cable end boxes for incoming and outgoing 11 Kv cable with suitable copper bus bars.
4.) Electronic Trivactor meter 11 KV HT of required capacity class A as per requirement of 11 KV /110 volts approved make of UHBVN/DHBVN ISImarked the panel will be complete with all internal wiring inter connection VT and HT compound filling of cable and boxes, HT cable connection etc. complete in all respect as approved by UHBVN/DHBVN authorities including the cost of CT/PT ,electronics meter,Test fees of euipments tested by UHBVN/DHBVN authorities upto the entire satisfaction of Engineer in Charges of the work.As per approved list of HVPN/DHBVN/UHBVN.
5.) Testing fees for CT and PT as approved by HVPN/DHBVN/UHBVN
1
77425
77425
NS Item -S/E of MS bucket stand (without Buckets ) made out of angle from size of 40mmx40mmx6mm i/c cost of labour and 2 coats of approved paint including one coat of red oxide ( Already approved rate in DNIT Central jail Ambala)
1
1516
1516
NS Item -Supply and erection of 100 watt LED Flood Light suitable for working on 220 V , 50 Hz AC supply, complete with making necessary connection in all respect. Make:- as per HPHC approved brand list.....
6
18000
3000
NS Item -Supply and Erection of 45 watt LED street Light suitable for operating on 220 V, 50Hz supply complete with making necessary connection. Make - as per HPHC approved brand list......
40
106440
2661
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (95 sqmm 3.5 core armoured as per requirment). Make as per approved brand list of HPHC
300
144300
481
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (10 sqmm 2 core armoured as per requirment). Make as per approved brand list of HPHC
250
25250
101
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (10 sqmm 4 core armoured as per requirment). Make as per approved brand list of HPHC
350
43750
125
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (70 sqmm 3.5 core armoured as per requirment). Make as per approved brand list of HPHC
250
96250
385
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (16 sqmm 4 core armoured as per requirment). Make as per approved brand list of HPHC
900
134100
149
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (240 sqmm 3.5 core armoured as per requirment). Make as per approved brand list of HPHC
20
22520
1126
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (35 sqmm 3.5 core armoured as per requirment). Make as per approved brand list of HPHC
750
159000
212
NS Item -Supply and erection of 180/200 watt LED Flood Light suitable for working on 220 V , 50 Hz AC supply, complete with making necessary connection. Make - Havells or as per HPHC approved brand list. without GST
14
89600
6400
HSR Item24.4.15.3 -STREET LIGHT 15.3. B.S.E.N. 10025 High Masts "Supply, installation, testing and commissioning of 20 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer in-Charge
Thickness of Top and Bottom Section = 3 mm & 4mm (minimum) Top Dia = 150 mm and Bottom Dia = 460mm
Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)"
HSR Rate(Rs.) 203913.00 Through Rate
1
203913
203913
HSR Item23.27.2 -Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 2. M.S. pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0
HSR Rate(Rs.) 6352.00 Through Rate
1
6352
6352
HSR Item23.22.4.2 -MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 4.2. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing)
HSR Rate(Rs.) 1406.00 Through Rate
1
1406
1406
HSR Item23.22.5.1 -MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole
HSR Rate(Rs.) 145.00 Through Rate
5
725
145
HSR Item23.22.5.8 -MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE
HSR Rate(Rs.) 1291.00 Through Rate
1
1291
1291
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (25 sqmm 4 core armoured as per requirment). Make as per approved brand list of HPHC
378
69174
183
NS Item -Supply of prestressed cement concrete (PCC) pole as per IS : 1678-1960, Height 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 kg. burried 1.80 m in ground, as per UHBVN Complete the all necessary connection in all respect. ( Rate taken from UHBVN 2024)
2
5368
2684
NS Item -Suply of prestressed cement concrete (PCC) pole as per IS : 1678-1960, Height 11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottomwith working load of 360 kg. burried 2.20 m in ground Complete the all necessary connection in all respect. ( Rate taken from UHBVN 2024)
2
11520
5760
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) 95 sqmm 3 core HT Electrical cables for working voltage upto 11000 volt with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (95 sqmm 3 core HT Cable armoured)
500
407000
814
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements