Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 1,42,18,000Document Cost
₹ 50,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_HBC_336892_1Bid Award Id
ViewTender No
202372C977CC 92F8 4B78 B549 A610AFE1D97357HHCTender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
[10.30.3]Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 3. Dark shade pigment using ordinary cement
1313.56
789449
601
[10.4]Providing and laying of screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping.
18625.48
1639042
88
[10.49.1]Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 1. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
208.13
366100
1759
[10.50.1]Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
12686.73
34342978
2707
[10.61]Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
2215.2
1674691
756
[10.62]Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
13500.67
7695381
570
[10.67.2]Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. Size of Tile 600x600 mm
15.01
15070
1004
[10.69.2]Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 2. Size of Tile 600x600 mm
593.66
641746
1081
[10.71.2]Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 2. Size of Tile 600x600 mm
6522.92
6738176
1033
[10.71.3]Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 3. Size of Tile 800x800 mm
719.71
872288
1212
[10.73]Providing and fixing ceramic and Glazed tiles/ vitrified tiles/ of any size of approved make in floors / dados, laid in any pattern as specified over base of 3 mm thick adhesive of reputed brands as per IS specification 15477-2004 using 5 Kg. adhesive per sqm area of tiles and jointed with white cement slurry mixed with pigment to match the shade of tiles excluding cost of tiles.
13502.1
16837118
1247
[10.8]Providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4
18626.44
3371385
181
[11.18]18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
1555.34
200638
129
[11.35]Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
41505.65
954629
23
[11.46]Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 and II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations, finished in smooth line and level etc. complete.
90127.07
16943889
188
[11.54]Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
12409.98
384709
31
[11.60]Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
58884.38
3474178
59
[11.64.1]Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. New work (two or more coats) over and including water thinnable priming coat with cement primer
30527.66
1373744
45
[11.67.1]Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. Water thinnable cement primer
59534.38
1309756
22
[11.70]`Extra for using White Cement based primer modified with high performance polymers, applied as an undercoat for exterior/interior cementitious surfaces before paint Technical Specifications: i) Degree of whiteness (in terms of reflectance) )93% ii) Fineness (Residue on 63 Micron Sieve) - Minimum 4.0 iii) Bulk Density - 0.8 to 0.9 kg/litre
iv) Viscosity by Brookfield, 50rpm, Spindle no RV 05 at 25 - 300cP to 600cP v) Pot Life - Min. 180 minutes vi) Coverage after 1st coat - 80-100 sqft/kg vii) Adhesion cross-cut on 2 coat application after 48 hours - Min. 3B`
15553.43
202194
13
[11.71.1]Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work
59534.38
3214856
54
[11.76]Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.
2770.96
102525
37
[11.77]Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.
2771.4
52656
19
[11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
2854.29
88482
31
[11.82.1]Painting the wooden / metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work
2770.96
135777
49
[11.94.1]Finishing walls with textured exterior paint of required shade : 1. New work (Two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
15553.43
2115266
136
[12.1.1.3]Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid separately). 1.3. Kiln seasoned and chemically treated Hollock wood
0.77
41044
53304
[12.102.1]Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 1. 125 mm
116
5684
49
[12.102.2]Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 2. 100 mm
1846
79378
43
[12.102.3]Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 3. 75 mm
1575
58275
37
[12.103.2]Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 2. Twin rubber stopper
872
45344
52
[12.104.3]Providing and fixing aluminium casement stays, ISI marked, anodised transparent or dyed to required colour and shade or powder coated or polyester powder coated, with necessary screws etc. complete. 3. Powder coated minimum thickness 50 micron aluminium
1023
60357
59
[12.12.2]Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 2. 1.0 mm thick
7031.53
3234503
460
[12.137.3]Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 3. 300 x 19 x 1.9 mm
1066
314470
295
[12.138]Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.
749
116844
156
[12.15]Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
347.14
64568
186
[12.157.1.2]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.2. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
124774
43670900
350
[12.157.2.2]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.2. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
48230.18
19436762
403
[12.172.3]Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F and ISO 11600 3. Up to 20 mm depth and 20 mm width
6903
1808586
262
[12.177.1]Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 1. With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm)
1813.03
1905494
1051
[12.37.2]Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 2. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
2795.22
3751185
1342
[12.37.3]Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 3. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
946.4
1245462
1316
[12.39]Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
2795.22
972736
348
[12.50.1]Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 1. Fixed to steel windows by welding
42183.54
3838702
91
[12.78.1]Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 1. 250x10 mm
688
219472
319
[12.78.3]Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 3. 150x10 mm
180
35280
196
[12.80]Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
154
83314
541
[12.85.1]Providing and fixing bright finished brass handles with screws etc. complete: 1. 125 mm
1048
182352
174
[12.85.3]Providing and fixing bright finished brass handles with screws etc. complete: 3. 75 mm
72
9144
127
[12.86]Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
341
31031
91
[12.89]Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
425
297925
701
[12.9.8]Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 8. Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading
807.64
754335
934
[12.98.1]Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 1. 300x16 mm
60
12060
201
[12.98.2]Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 2. 250x16 mm
1381
247199
179
[12.99.1]Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 1. 300x10 mm
60
5760
96
[12.99.3]Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 3. 200x10 mm
1006
72432
72
[12.99.5]Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 5. 100x10 mm
2046
94116
46
[13.21.1]Supply and fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm and Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets and screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification and entire satisfaction of Engineer-in-charge. 1. Door Frame of size 80mm x 50mm with 37mm wide single rebate for 35mm door shutter
3972.65
3762099
947
[13.21.2]Supply and fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm and Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets and screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification and entire satisfaction of Engineer-in-charge. 2. Door Frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutter
6032.4
7480176
1240
[13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2133.5
177080
83
[13.3.1.2]Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 1.2. Profile B Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)
2777.55
936034
337
[13.3.2.2]Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 2.2. Profile C Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)
210.9
75713
359
[13.4.2]Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 2. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)
98560.8
9363276
95
[13.41]Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
6079
2407284
396
[13.42.1]Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 1. M.S. tube
37148
3974836
107
[13.5.3]Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 3. 10 x 120 mm
14864
1159392
78
[13.9.2]Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3 mm and nuts and bolts complete. 2. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
2535.74
1767410
697
[20.26.1]Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 1. 11.43 cm thick wall
1956
320784
164
[20.26.2]Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 2. 22.86 cm thick wall
952
230384
242
[20.71.2]Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 2. 56" (1400mm)
18
42498
2361
[21.84.3]Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 3. Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab)
185
1006030
5438
[21.85.3]Extra for every 0.30 metre depth of Inspection chamber 3. 600 mm x 900 mm inside
74
84212
1138
[22.1.1]Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 1. White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
184
372968
2027
[22.10.1.3]Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 1.3. Kitchen sink with drain board 510x1040 mm bowl depth 200 mm
54
220914
4091
[22.10.2.1]Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 2.1. Kitchen sink without drain board 610x510 mm bowl depth 200 mm
4
10480
2620
[22.101.1.1]Providing and fixing Unplasticised PVC connection pipe with brass unions : 1.1. 30 cm length 15 mm nominal bore
1418
62392
44
[22.102.2]Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 2. 150 mm diameter
324
48924
151
[22.103.2]Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 2. 20 mm nominal bore
7
2058
294
[22.104.1]Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 1. 15 mm nominal bore
338
116948
346
[22.105.1]Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 1. 15 mm nominal bore
382
195584
512
[22.107.1]Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore
648
329184
508
[22.108.1]Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore
1418
629592
444
[22.109]Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
1418
69482
49
[22.117]Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
540
68580
127
[22.118]Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
540
90180
167
[22.119.2]Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 2. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
324
116640
360
[22.127]Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
324
33048
102
[22.14.1.1]Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 1.1. Semi rigid pipe 32 mm dia
200
9200
46
[22.14.1.2]Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 1.2. Semi rigid pipe 40 mm dia
58
3132
54
[22.15]Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer-in-charge.
369
271215
735
[22.16]Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint
80
68080
851
[22.163.3]Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 3. 200 mm diameter
1760
792000
450
[22.163.4]Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 4. 250 mm diameter
300
198900
663
[22.166.1.1]Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 1.1. 100x100 mm size P type With common burnt clay non-modular bricks of class designation 7.5
61
88877
1457
[22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
8000
56000
7
[22.212.1.2]Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P. brass screws and rawl plugs etc. complete including cutting and making good the walls etc. 1.2. C.P Brass Two Way
368
41216
112
[22.213.1]Providing and fixing in position best Indian make C.P. brass Tooth Brush cum Tooth Paste Holder fixed in with rawl plugs with C.P. brass screws complete including cutting and making good the walls etc. 1. Tooth Brush-cum-Tooth Paste holder
326
72372
222
[22.22.1]Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
46
160678
3493
[22.26.4]Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 4. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern
23
212934
9258
[22.33]Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
292
3156228
10809
[22.38]Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
292
70372
241
[22.42.1]Providing and fixing toilet paper holder : 1. C.P. brass
338
131482
389
[22.5]Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
184
203136
1104
[22.85.2]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes
2324
420644
181
[22.85.3]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes
3592
836936
233
[22.85.4]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 4. 32 mm nominal outer dia Pipes
3340
1038740
311
[22.85.5]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 5. 40 mm nominal outer dia Pipes
1162
499660
430
[22.85.6]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 6. 50 mm nominal outer dia Pipes
870
563760
648
[22.86.2]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes
5094
1344816
264
[22.86.3]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes
3814
1270062
333
[22.86.4]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 4. 32 mm nominal outer dia Pipes
3644
1563276
429
[22.88.2]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 2. 20 mm dia nominal bore
170
36210
213
[22.88.3]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 3. 25 mm dia nominal bore
220
62480
284
[22.88.4]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 4. 32 mm dia nominal bore
260
91260
351
[22.88.5]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 5. 40 mm dia nominal bore
120
50040
417
[22.88.6]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 6. 50 mm dia nominal bore
450
230850
513
[22.91.7]Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.
External work 7. 65 mm dia nominal bore
800
403200
504
[22.91.8]Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.
External work 8. 80 mm dia nominal bore
450
277200
616
[22.94.2]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 2. 20 mm nominal bore
210
32550
155
[22.94.3]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 3. 25 mm nominal bore
522
110664
212
[22.94.4]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 4. 32 mm nominal bore
386
99588
258
[22.94.5]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 5. 40 mm nominal bore
174
55854
321
[22.94.6]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 6. 50 mm nominal bore
110
44000
400
[22.94.7]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 7. 65 mm nominal bore
80
58880
736
[22.94.8]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 8. 80 mm nominal bore
45
35730
794
[22.98.1]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 1. 25 mm nominal bore
86
35604
414
[22.98.2]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 2. 20 mm nominal bore
40
15360
384
[22.98.3]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 3. 32 mm nominal bore.
52
25220
485
[22.98.4]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 4. 40 mm nominal bore
44
24948
567
[22.98.5]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 5. 50 mm nominal bore
40
29200
730
[22.98.6]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 6. 65 mm nominal bore
30
37950
1265
[22.98.7]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 7. 80 mm nominal bore
10
18920
1892
[23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA
54
361530
6695
[23.22.1.11]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.11. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 200 to 250 amp, 25 KA
3
32427
10809
[23.22.1.12]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.12. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 300 to 400 amp , 50 KA
3
61050
20350
[23.22.1.13]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.13. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 600 to 800 Amp , 50 KA
1
40081
40081
[23.22.1.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.3. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 16 to 100 Amp, 25 KA
1
4635
4635
[23.22.1.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.6. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 300 Amp, 25 KA
1
9290
9290
[23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA
2
12260
6130
[23.22.4.11]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.11. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 8 way ( 8 incoming 3phase*8 outgoing)
36
290988
8083
[23.22.4.12]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.12. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 12 way ( 8 incoming 3phase*12 outgoing)
4
43268
10817
[23.22.4.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.5. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing)
1
2707
2707
[23.22.4.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.6. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 6 way ( 8 incoming 3phase*6 outgoing)
7
22932
3276
[23.22.4.7]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.7. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing)
128
506624
3958
[23.22.4.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.9. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 4 way ( 8 incoming and 3phase*4 outgoing)
1
6088
6088
[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole
2928
424560
145
[23.22.5.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE
36
15336
426
[23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE
293
378263
1291
[23.22.6.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.5. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. FP RCCB 30ma sensitivity , 40 A
52
101816
1958
[23.22.6.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.6. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. FP RCCB 30ma sensitivity , 63 A
88
197472
2244
[23.23.10]MISCELLANEOUS 10. Supplying and drawing of 1 no UTP 4 pair CAT 6a LAN Cable in the existing surface/recess MS/PVC conduit as required
9710
427240
44
[23.23.6.3]MISCELLANEOUS 6.3. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 375 X 50 X 2 mm
45
17865
397
[23.23.7.3]MISCELLANEOUS 7.3. Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. GI cable tray Cover , suitable for cable tray of 375 X 50 X 2 mm metre
45
26460
588
[23.23.8.1]MISCELLANEOUS 8.1. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 2 pair telephone wire
3890
27230
7
[23.23.9]MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required
3000
93000
31
[23.24.1]MS STAND, BUS BAR CHAMBER AND PANELS 1. Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide.
141
11844
84
[23.26.1]SAFETY ITEMS 1. Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages.
8
608
76
[23.3.6.1]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.1. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm)
24847
2186536
88
[23.3.6.3]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm)
720
103680
144
[23.3.6.5]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.5. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm)
490
169540
346
[23.4.1.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.1. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A
4217
2192840
520
[23.4.2.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 2.1. Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A
180
144720
804
[23.4.3.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 3.1. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch Group A
1486
334350
225
[23.4.4.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.1. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group A
3088
2238800
725
[23.4.5.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.1. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A
995
994005
999
[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia.
5730
183360
32
[23.7.6.3]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.3. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 32 mm dia.
350
15750
45
[23.7.6.4]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.4. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 40 mm dia.
1300
74100
57
[23.8.1.12]FITTING AND ACCESSORIES 1.12. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Bakelite angle/straight button holder large size.
708
32568
46
[23.8.1.6]FITTING AND ACCESSORIES 1.6. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Call bell 220/230 volts musical type
36
3240
90
[23.8.10.1]FITTING AND ACCESSORIES 10.1. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data
392
36456
93
[23.8.10.2]FITTING AND ACCESSORIES 10.2. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 Modules
725
92075
127
[23.8.11.1]FITTING AND ACCESSORIES 11.1. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp 1 way switch
437
17917
41
[23.8.11.10]FITTING AND ACCESSORIES 11.10. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Blanking plate
828
14904
18
[23.8.11.4]FITTING AND ACCESSORIES 11.4. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp Socket
437
35834
82
[23.8.11.7]FITTING AND ACCESSORIES 11.7. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt
812
208684
257
[23.8.11.8]FITTING AND ACCESSORIES 11.8. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Telephone Socket outlet modular type
200
15000
75
[23.8.11.9]FITTING AND ACCESSORIES 11.9. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. T.V. Socket outlet modular type
192
14400
75
[23.8.13]FITTING AND ACCESSORIES 13. Supplying,installation,testing and commissioning of Passive Infrared(PIR) based occupancy sensor , non regulating programmable type, suitable for connected load up to 10Amp , for mounting height up to 2.8 metre and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.
29
106894
3686
[23.8.4]FITTING AND ACCESSORIES 4. Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job.
812
77140
95
[23.8.5]FITTING AND ACCESSORIES 5. Supply and erection 5-30 A single phase A.C. energy metre , LCD display and optical port , with rag bolts on wall/existing pedestal including the cost of rag bolts required to complete the job in all respect with necessary connections and bonding to earth.
36
61740
1715
[23.8.8]FITTING AND ACCESSORIES 8. Supply and erection 10-60 A Three phase A.C. energy metre , LCD display and optical port , with rag bolts on wall/existing pedestal including the cost of rag bolts required to complete the job in all respect with necessary connections and bonding to earth.
36
70920
1970
[23.8.9]FITTING AND ACCESSORIES 9. Supply and erection direct reading LCD Display Digital Ammetre/Voltmetre ( without CT or PT ) on wall/existing penal complete in all respect with necessary connections
2
1988
994
[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
6
16326
2721
[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.
600
438000
730
[24.1.11]EARTHING AND LIGHTENING ARRESTOR 11. Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required.
300
56700
189
[24.1.14]EARTHING AND LIGHTENING ARRESTOR 14. Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size.
2400
148800
62
[24.1.15]EARTHING AND LIGHTENING ARRESTOR 15. Erection only of lightning conductor GI. tape including supply of suitable GI. staples of same size.
450
13050
29
[24.1.16]EARTHING AND LIGHTENING ARRESTOR 16. Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cm x 16cm x 3mm thick G.I. base plate and necessary nuts and bolts with washers.
32
28736
898
[24.1.17]EARTHING AND LIGHTENING ARRESTOR 17. Providing and fixing testing joints made of 20mm x 3mm thick G.I. strips 125 mm long with 4 nos. G.I. bolts and nuts with washers complete.
28
2044
73
[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required.
6
3912
652
[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
54
181872
3368
[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.
16
132400
8275
[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.
70
56070
801
[24.1.6]EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.
240
11280
47
[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.
140
50400
360
[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.
772
74112
96
[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.
300
219000
730
[24.2.6.6]LT CABLE 6.6. Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 16 sqmm
303
3939
13
[24.2.7.2]LT CABLE 7.2. Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core
194
8730
45
[24.2.7.3]LT CABLE 7.3. Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core
94
7238
77
[24.2.8.5]LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm
19
190
10
[24.2.8.7]LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm
41
615
15
[24.2.9.5]LT CABLE 9.5. Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint. For 25 sqmm to 50 sqmm Cable 3 to 4 Core
3
7185
2395
[24.5.1.6]MISCELLANEOUS ITEMS 1.6. Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 16 sqmm
390
109590
281
[24.5.2.1]MISCELLANEOUS ITEMS 2.1. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 40/32 mm outer dia/ inner dia
20
2000
100
[25.3.6]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 6. 100mm dia.
70
186480
2664
[25.4.4]Supplying, fixing, testing and commissioning o NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end and PN 16 pressure rating as specified. 4. 100mm dia.
3
12528
4176
[28.1.1.1]Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimetre per square metre, including preparation of surface but excluding grading complete with : 1.1. Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322
3997.71
1071386
268
[28.16]Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured.
2090.3
679347
325
[28.25.1]Grading roof for water proofing treatment with 1. Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
319.3
1208231
3784
[28.50]Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) ) 78, solar reflection ) 0.70 and initial emittance ) 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
3489.31
3423013
981
[28.8]`Supplying and applying waterproofing treatment for `Raft Slab` by using 1.2 mm thick fully bonded HDPE sheet membrane complying to BS8102:2009/ IS 16471-2017. The HDPE shall be virgin HDPE and not recycled, thickness of bare HDPE shall not be less than 0.8 mm coated with pressure sensitive adhesive layer and a trafficable granular top layer.
The HDPE membrane shall have the following typical properties:
1. Tensile Strength : )27 Mpa ( as per ASTM D412)
2. Puncture Resistance: )1000N±5% (as per ASTM E154)
3. Elongation: )500%
4. Peel adhesion to concrete: )1500N/m (as per ASTM D903 Modified)
5. Resistance to Hydrostatic Head: )70 metre (as per ASTM D751-06(2011)
6. UV exposure test (60 days): No change
7. Lap Joint Strength : 1500N/m (as per ASTM D1876)
HDPE Membrane shall be installed over the entire PCC area with standard 75 mm selvedge laps and end laps overlaid with HDPE Sealed Tape as per manufacturer`s instructions. The rates are inclusive of supply and installation of membrane as per manufacturer methodology.
The rates are inclusive of surface preparation, injection grouting at honeycombed areas all complete as per manufacturer methodology. `
4252.7
2789771
656
[29.2]Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.29.6) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, plus 12mm Air gap plus 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
349.32
792607
2269
[29.6]Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis and design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminium sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, TandP, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
349.32
490794
1405
[3.1.18]By Mechanical Transport including loading, unloading and stacking 18. Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10 km for all lifts, complete as per directions of Engineer-in-charge.
106.26
21464
202
[3.1.2]By Mechanical Transport including loading, unloading and stacking 2. Earth
914
75862
83
[30.82.1]Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness up to 6` (six inches) for passing drain pipe and repairing the hole after insertion of drain pipe etc. including finishing-complete so as to make it leak proof. 1. Drain pipe of 150mm internal dia
935
932195
997
[30.82.2]Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness up to 6` (six inches) for passing drain pipe and repairing the hole after insertion of drain pipe etc. including finishing-complete so as to make it leak proof. 2. Drain pipe of 100mm internal dia
340
232560
684
[32.47.3]Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance = 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 and7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre and 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. 3. With 16 mm thick bevelled tegular mineral fibre Anti-microbial false ceiling tile confirming to ISO 5 (class 100 ) specifications
98.25
130967
1333
[4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil
8131.13
634228
78
[4.16.1.3]Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 1.3. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm
2217.4
190696
86
[4.31.1]Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 1. All kinds of soil
1415.01
72165
51
[4.32]Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
7128.87
327928
46
[4.38.1]Supplying chemical emulsion in sealed containers including delivery as specified. 1. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
536.7
105729
197
[4.39]Providing and injection chemical emulsion for PRE-CONSTRUCTIONAL ant termite treatment (excluding the cost of chemical emulsion) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, along with the external perimetre of building, expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured) using Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
3753.11
1065883
284
[4.4.1]Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 1. All kinds of soil
5965.19
65617
11
[5.14]Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
1874.67
65613
35
[5.26]Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.
594.67
1172094
1971
[5.29.1]Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1. Of area 3 sq. metres and below
208
22464
108
[5.29.2]Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 2. Of area beyond 3 sq. metres
238
34986
147
[5.32.2]Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: 2. Channels, angles, tees and flats
11338.84
11338
1
[5.49]Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
80.85
1212
15
[5.56.1]Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-charge: 1. Up to 150 mm diameter
13.72
1234
90
[5.56.2]Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-charge: 2. Above 150 mm dia up to 300 mm dia
27.43
3483
127
[5.7.4]Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortar
1347.56
788322
585
[6.1.3]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 3. 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)
554.3
1899031
3426
[6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
792.28
1934747
2442
[6.1.7]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 7. 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)
414.19
907904
2192
[6.13]Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth.
644.42
197192
306
[6.25.1]Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. 1. All works up to plinth level
3558.43
15884831
4464
[6.25.2]Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. 2. All works above plinth level up to floor IV level
9345.2
42072090
4502
[6.26.2]Extra for providing richer mixes up to plinth and at all floor levels. 2. Providing M-35 grade concrete instead of M-25 grade BMC/ RMC. (Note : Cement content considered in M-35 is @ 350 kg/ cum)
1358.45
161655
119
[6.27]Extra for R.C.C./ B.M.C/ R.M.C. work above floor IV level for each three floors or part thereof.
884.81
215893
244
[6.27]Extra for R.C.C./ B.M.C/ R.M.C. work above floor IV level for each three floors or part thereof.
8834.02
2155500
244
[6.3.1]Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 1. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
25.01
99389
3974
[6.30.1]Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete
2495.33
389271
156
[6.30.15]Centering and shuttering including strutting, propping etc. and removal of form for 15. Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
1198.84
185820
155
[6.30.16.1]Centering and shuttering including strutting, propping etc. and removal of form for 16.1. Edges of slabs and breaks in floors and walls Under 20 cm wide
6205.99
707482
114
[6.30.19]Centering and shuttering including strutting, propping etc. and removal of form for 19. Weather shade, Chajjas, corbels etc., including edges
4489.4
1248053
278
[6.30.2]Centering and shuttering including strutting, propping etc. and removal of form for 2. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
2329.27
656854
282
[6.30.3]Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform
27446.24
5708817
208
[6.30.5]Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers
30554.96
9044268
296
[6.30.6]Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts
13635.39
3572472
262
[6.30.7]Centering and shuttering including strutting, propping etc. and removal of form for 7. Stairs, (excluding landings) except spiral-staircases
2242.8
650412
290
[6.33.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 6. Thermo-Mechanically Treated bars of grade Fe-500D or more.
832569.97
50786768
61
[6.34.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1660213.66
101273033
61
[6.9.1]Providing and laying damp-proof course with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size) 1. 50 mm thick
196.29
39650
202
[7.21.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand)
627.68
2216338
3531
[7.28.2]Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. 2. Cement mortar 1:4 (1 cement :4 coarse sand)
3004.36
1466127
488
[7.29]Extra for half brick masonry in superstructure, above floor IV level for every three floors or part thereof by mechanical means.
2098.94
37780
18
[7.30]Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
3003.87
225290
75
[7.31.2]Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in super structure above plinth and up to floor IV level. 2. Cement mortar 1 : 4 (1 cement : 4 coarse sand)
3004.28
1424028
474
[7.50]Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor IV level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work.
531.7
2295880
4318
[7.51]Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).
6398.47
23117672
3613
[7.57]Dressed or moulded two brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required.
965.55
160281
166
[8.26.2.2]Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 2.2. Granite of any colour and shade Area of slab over 0.50 sqm
769
2134744
2776
[8.28]Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
426
167418
393
[8.29]Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
451.54
94371
209
[8.30.2]Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 2. Granite Stone of approved shade
24.3
58976
2427
[8.5]Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
634.38
119897
189
[9.17.1]Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1. In 75x75 mm deep chase
786.69
88109
112
[9.18]Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
99
14553
147
[9.47.3]Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main `T` runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross `T` of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main `T` at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross `T` of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main `T` runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 3. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
2211.16
2600324
1176
[9.49.1]Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing `C` wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm centre to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centres with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : 1. GI Metal Ceiling Clip in plain Bevelled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
2211.6
2554398
1155
[9.57.2]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2. 110 mm diameter
2465
493000
200
[9.58.1.2]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1.2. Coupler 110 mm
769
63058
82
[9.58.5.2]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.2. Bend 87.5° 110 mm bend
118
10974
93
[9.58.6.2]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 6.2. Shoe (Plain) 110 mm Shoe
59
4661
79
[9.59.2]Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 2. 110 mm
769
113043
147
[9.60]Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
59
2065
35
NS PART
Providing and fixing CP Jali with frame complete in all respect
1304
233416
179
Providing & fixing CP brass flange complete
1418
18434
13
Providing & fixing SWR PVC pipe clip/ clamp 90mm dia
1124
48332
43
Providing & fixing SWR PVC Vent cowl with Jali 90mm dia
74
3996
54
Providing & fixing SWR PVC Coupler/ Socket 90mm dia
560
48160
86
Providing & fixing SWR PVC Bend with Door 90mm dia
144
21024
146
Providing & fixing SWR PVC Nanhi trap with Jali(110x110mm)
260
70980
273
Providing & fixing SWR PVC Vent cowl with Jali 110mm dia
74
4514
61
Providing & fixing SWR PVC pipe clip/ clamp 110mm dia
1913
84172
44
Providing & fixing SWR PVC Coupler/ Socket 110mm dia
956
99424
104
Providing & fixing SWR PVC Bend with Door 110mm dia
191
31897
167
Providing & fixing SWR PVC P-Trap (DS) 110 x 110mm
1130
277980
246
Providing and fixing in position 5mm thick looking mirror bevelled on sides fixing in position with necessary C.P. screw and washer complete
480
1227360
2557
Making Corbelling with CC 1:1.5/2:3 with stone aggregate 20 mm thick nominal size i/c shuttering (NS)
680.9
387432
569
Extra labour for plasster for any typer of corebelling in RCC at top of parapet complete in all respect
965.55
157384
163
S/I/T/C OF 6TB SURVEILLANCE HARD DISK with all labour and petty material reqd. to complete in all respect upto the entire satisfaction of Engineer-in-Charge. (MAKE : WD/ SEAGATE/ HITACHI )
4
75600
18900
Providing and fixing SWR PVC Single T With door 90mm dia
225
38025
169
Providing and fixing SWR PVC Single T With door 110mm dia
350
71750
205
Providing and fixing SWR PVC Single T 110mm dia
224
40320
180
Earth filling with earth brought from outside the campus, irrespective of any lead, including laying in 15cm in layers, watering and consolidating complete in all respect and fully satisfaction of Engineer-in-charge (Based on HSR 2021).
2485.58
852553
343
Cutting chase in brick/ concrete wall for providing skirting flush with plaster
21203.34
508880
24
Providing and fixing aluminium Folding Handle 100mm (powder coated) for door and windows shutter with stainless steel or CP brass screws of required size complete
22
1672
76
Providing and fixing curtain rod 20/25mm S.S. pipe i/c cost of supportin clamp and side knobs or cupboard rod in any shape i/c side knobe complete in all respect
322.8
50356
156
Providing and Fixing 25mm thick finished red sand stone both sides slightly rounded for partition and shelves in CB.
155.52
104664
673
Providing and fixing MS rod 8mm fully threaded with nut bolts and washer inserted in aluminium sections, window and door shutters complete in all respect
1867.2
225931
121
Making corbelling with CC 1:1.1/2:3 with stone aggregate 20mm thick nominal size i/c shuttering
284.65
79702
280
Providing and fixing zinc coated clamp i/c cost of 12mm screwed GI rod and fastener complete in all respect having dia 110mm/90mm
2847
603564
212
Supply and Erection of aluminum under ground cable loose in existing pipe or trenches including necessary connection, digging and refilling of trenches.
50 Sq. mm 4 Core Cable . (Armoured)
240
76560
319
Supply and Erection of aluminum under ground cable loose in existing pipe or trenches including necessary connection, digging and refilling of trenches 25 Sq mm 4 Core Cable . (Armoured)
80
15040
188
Supply installation testing and commissioning of wall / free standing floor mounting dust and vermin proof compartmentalized cubical panel for the purposes of fixing of ACB, MCCB and energy meters etc. made out of 2mm thick CRCA sheet, required hardware, 3mm thick Bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel, dully painted by 2 coat of zinc / Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU / Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate MS base channel, hinged door with inter locking arrangement for equipment / switch gear.
Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar Bakelite sheet 3mm thick for separately cable alley to BBC from switch chamber. Extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection. (Only outer area on all sides shall be measured).
53
189316
3572
Supplying and fixing of Copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending , cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation Complete in all respect.
500
446500
893
Providing and fixing in position oval shaped under/ over counter wash basin CERA make or equivalent i/c cost of 32mm dia CP waste complete in all respect
298
548320
1840
Providing and fixing 12mm thick plasto board (Sintex or equivalent) for Kitchen, Cupboard etc. including accessories for fixing such as adhesive screws, beadings etc. complete in all respect
2770.96
4267278
1540
Providing and fixing Bin Holder make(Life time(space and spie or equivalent) including accessories for fixing such as Nails and screw etc complete in all respect
40
30160
754
Providing and fixing detergent holder make(Life time(space and spie or equivalent ) including accessories for fixing such as Nails and screw etc complete in all respect
40
28520
713
Providing and fixing Botttle pullout in wire basket 200 mm make(Life time(space and spie or equivalent ) including accessories for fixing such as Nails and screw etc complete in all respect
80
195760
2447
Providing and fixing S carousel make(Life time(space and spie or equivalent) including accessories for fixing such as Nails and screw etc complete in all respect
40
608080
15202
Providing and fixing wire basket cutlery perforated (32``x20``x4``) make(Life time(space and spieor equivalent) including accessories for fixing such as Nails and screw etc complete in all respect
40
109280
2732
Providing and fixing wire basket cutlery plain (32``x20``x4``) make(Life time(space and spie or equivalent ) including accessories for fixing such as Nails and screw etc complete in all respect
40
109280
2732
Providing and fixing wire basket cutlery Thali (32``x20``x8``) make(Life time(space and spie or equivalent ) including accessories for fixing such as Nails and screw etc complete in all respect
40
137600
3440
Providing and fixing wire basket cutlery Thali (17``x20``x8``) make (Life time(space and spie or equivalent ) including accessories for fixing such as Nails and screw etc complete in all respect
40
97960
2449
Providing and fixing wire basket cutlery plain (17``x20``x8``) make(Life time(space and spie or equivalent ) including accessories for fixing such as Nails and screw etc complete in all respect
40
87400
2185
Providing and fixing wire basket cutlery plain (15``x20``x4``) make(Life time(space and spie or equivalent ) including accessories for fixing such as Nails and screw etc complete in all respect
40
61280
1532
Providing and fixing Grain trolley with frame (15``x20``x12``) make(Life time(space and spie or equivalent ) including accessories for fixing such as Nails and screw etc complete in all respect
40
142520
3563
Providing and fixing Hinges 0 degree Hettich make or equivalent including accessories for fixing such as Nails and screw etc complete in all respect
280
149520
534
Providing and fixing Hinges 8 degree Hettich make or equivalent including accessories for fixing such as Nails and screw etc complete in all respect
152
86640
570
Providing and fixing 20 inch Telescopic channel having normal closing make(kaff, hettich etc. or equivalent) including accessories for fixing such as Nails and screw etc complete in all respect
1736
968688
558
Providing and fixing shocker inox Hettich make or equivalent including accessories for fixing such as Nails and screw etc complete in all respect
80
35120
439
Providing and fixing SS Handel 6 inch Hettich make or equivalent (as approved by Engineer incharge) including accessories for fixing such as Nails and screw etc complete in all respect
80
20880
261
Providing and fixing SS Handel 8 inch Hettich make or equivalent (as approved by Engineer incharge) including accessories for fixing such as Nails and screw etc complete in all respect
240
79920
333
Providing and fixing SS Handel 18 inch Hettich make or equivalent (as approved by Engineer incharge) including accessories for fixing such as Nails and screw etc complete in all respect
240
165360
689
Providing and fixing inox pvc legs including accessories for fixing such as Nails and screw etc complete in all respect
1760
59840
34
Providing and fixing PVC Skirting 75mm wide(as approved by Engineer incharge) including accessories for fixing such as Nails and screw etc complete in all respect
3200
387200
121
Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (DSR 2022/18.7.6) 80 mm dia
30
56550
1885
Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (DSR 2022/18.7.1) 25 mm dia
60
39863
664.39
Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required. (DSR 2022/18.22)
9
13914
1546
Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc. of following sizes as required : (DSR 2022/18.24.3) 150 mm Dia
3
129133
43044.39
Providing and fixing chiken mesh jali (app. 2.0 kg per 200 sft) with nail and washer on wall, columns and beams etc. before applying plaster to avoid cracks at junction and intermediate of wall complete in all respect (NS)
58884.37
2237606
38
Providing and applying RCC bond for Gypsum plaster on RCC ceiling etc. complete in all respect (NS)
78368.94
4153553
53
`Supply and erection of metal exhaust fan, double ball bearing suitable for single phase A.C. 230 Volts, 50 HZ capacitor ,900 RPM (Heavy duty) complete with mounting ring, blade, fixing and making necessary connections etc. (Crompton greaves make equivalent to other approved brands) i) Size 300 mm sweep` `
145
242150
1670
`Supply and erection of aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm and blade thickness 0.80 mm) including all labour and other petty material required to complete the job. (Canon, National make) i) Size 300 mm sweep `
145
52925
365
S/E of 250 mm sweep AC Ex fan PVC body with louver shutter suitable for single phase AC 230 volt 50 hz supply 900 RPM and capacitor run complete in all respect .
202
268862
1331
Providing and fixing SWR PVC Single T 90mm dia
219
33069
151
Providing and fixing SWR PVC pipe classic type ‘B’ and specials ISI marked and rubber ring with solvent complete in all respect (NS) 110mm dia pipe
5946
2289210
385
Providing and fixing SWR PVC pipe classic type ‘B’ and specials ISI marked and rubber ring with solvent complete in all respect (NS) 90mm dia pipe
4620
1404480
304
S/E of LED downlighter 15W, with SPD square/ round, surface /recess mounting min. 110 lumens, CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.
904
545112
603
S/E of LED Batten fitting 1 x 18/20W, with SPD surface mounting min. 110 lumens , CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.
1479
422994
286
Supply and Erection of 9 - 11 Watt LED bulb, minimum 110 lumens output, , operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.
708
70800
100
S/E of LED mirror luminaire 10W, with SPD surface mounting min. 110 lumens, CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.
428
114704
268
Supplying, fixing, connecting, testing and commissioning of 10 W Bulkhead type LED light fitting, with spd operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.
100
31700
317
SITC of aviation lighting fitting with spd complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc..
3
7905
2635
S/E of LED downlighter 18W, with SPD square/ round, surface /recess mounting min. 110 lumens CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.
874
967518
1107
S/E of LED panel 36W size 2` x 2`, with SPD square/ round, surface /recess mounting min. 110 lumens, CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.
222
422244
1902
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325. b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
900 lpm at 35 m Head
3
216348
72116
Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
7.7)100 mm dia
975
1044225
1071
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : (9.1) Single headed Gunmetal
64
342656
5354
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
7
6454
922
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
128
474368
3706
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipment`s on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket.
(17.1) 30 m
64
384640
6010
Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : (18.1) Gun metal
64
109824
1716
Supplying and fixing 25 amps, 240 volts, SPN modular socket outlet, with 2 pole and earth,along with 25 amps `C` curve, SP modular MCB with modular cover sheet and concealed GI Box complete in all respect as required.
180
198000
1100
19) Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
(19.1) 2 way-100 mm dia M.S. Pipe
14
65912
4708
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
7
90062
12866
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required. (DSR16.7) (EandM)
9
7038
782
SITC of Air Release Valve, Gunmetal, having rubber ball with 1” (25mm) BSP Male threaded inlet complete in all respect.
7
9492
1356
SITC of Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926 complete in all respect (Make: NEWAGE)
64
68928
1077
`Supplying, Laying, terminating, testing, commissioning of folowing sizes of Copper Conductor XLPE insulated, PVC sheathed unarmoured cable 1100 V grade. In existing 40mm PVC Conduit On surface/Recessed the cable run shall be fixed on G.I. clamps etc of suitable size or as directed by the E-I-C complete in all respects. Supply and providing cable identification markers. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per specifications complete as required. 6sq mm X 2 core
900
232200
258
Fire shaft door fabricated out of M.S. sheet and frame, door size of 1200 (W) x 2100 (h) with 4 mm thick glass, suitable Rubber beading and Locking arrangement and complete door shall be powder coated with red color powder coating
64
853120
13330
Fabricating ,supplying, installation, testing and commissioning of suitable size outdoor floor mounted compartmentalized cubicle panel ,fabricated from 2 mm thick CRCA sheet with sloped roof and partitions with stiffeners whenever required dust and vermin proof, powder coated of approved shade after seven tank process with suitable electrolytic grade high conductivity copper bus bar, suitable operation on 3 phase 415V, 50Hz AC supply. Incoming Suction: i) 63 Amps FP MCCB 25 KA (lcs) panel mounting type-1 no.
ii) 0-63 Amps. Digital Ammeter with CTs -1 set
iii) 0-500 Volts Digital Voltmeter and protection fuses-1 set
iv) 100 Amps, 4 strip copper bus bars of suitable length - 1 set
v) Phase indicating lamps with control switch and protective fuses-3 nos.
Outgoing suction: i) Terrace pump section comprising of 32 Amp 25 KA (lcs) TPMCCB panel mounting type,1 no. DOL starter with OL and UV protection. Current sensing types single phasing preventer, indication lamps, ON/OFF push button, auto manual selector switch, ammeter with selector switch ,ammeter with selector switch and CTs, necessary inter locks complete suitable for automatic operation etc. as required-1 set(startand stop push button found floor-1 set) ii) Control section having control components integrating the terrace pumps so as to satisfy the functional requirements visual/audio alarms, necessary instrument , indicating lamps, push buttons, fuse terminal blocks etc. and other accessories as per specification-1 set (for one pumps) (CPRI APPROVED Panel). `
3
96444
32148
Supplying, Laying, terminating, testing, commissioning of following sizes of Copper Conductor XLPE insulated, PVC sheathed unarmoured cable 1100 V grade. In existing 40mm PVC Conduit On surface/Recessed the cable run shall be fixed on G.I. clamps etc of suitable size or as directed by the E-I-C complete in all respects. Supply and providing cable identification markers. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per specifications complete as required. 16 sq.mm X 4 core
2700
2967300
1099
Providing and fixing of 4.5 Kgs capacity CO2 gas type ISI marked fire extinguisher IS:15683 complete as required complete in all respect with the entire satisfaction of Engineer-In-charge. (Make:Omex/Lifeguard/ Safex). `
142
1014448
7144
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 6 sq. mm plus 2 X 6 sq. mm earth wire
150
70800
472
Providing and fixing of 6 Kgs capacity ABC stored pressure type ISI marked fire extinguisher IS:15683 with 90% MAP powder complete in all respect with the entire satisfaction of Engineer-In-charge. (Make:Omex/Lifeguard/ Safex).
142
634030
4465
Providing and fixing of Co2 type Fire Extinguisher 9 Kgs. Capacity, made from brand new seamless steel cylinder, as per IS: 7285 and CCE approval fitted with discharge, hose and horn with wheel type valve mounted on trolley wheels with initial charge as per IS: 16018 : 2012 specification, bearing ISI Mark and EIL approved Make: SAFEX / Omex/ Lifeguard
142
1394866
9823
`Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 x 10 sq.mm plus 2 x 6 sq.mm. earth wire
1440
861120
598
Providing and fixing Fire related signages printed on photo luminescent U1000 aluminium sheet of 1.0 mm ( plus -10%) containing Lumigan II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge. Make : Trlacote/ Safex/ Omex
219
107529
491
Supply and erection of co-axial TV cable (RG-6) with electrolytic grade solid bare copper conductor, gas injected physical foamed polythylene insulation, screened with laminated aluminium tape and aluminium alloy wire braided, jelly flooded and UV grade PVC jacketed in existing pipe, complete in all respect including making necessary connections and labour etc.
3840
111360
29
`Supply and fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect.
up to 125A MCCB
`
2
1608
804
`Supply and fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect.
Above 125A to 250A MCCB
1
1072
1072
`Supply and fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect.
Above 250A to 630A MCCB
3
4821
1607
`Supply and erection of single phase auto reset Automatic Changeover Current Limiter(ACCL) of capacity 30/ 15 Amp. Complete in all respect including fixing of the same and making necessary connections etc. up to the entire satisfaction of the engineer-in-charge of the work.
36
48240
1340
Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. (i) PVC pipe 80 mm dia.
450
76050
169
Supplying, installing on wall or suspension on ceiling, testing and commissioning of following capacity Air Insulated Compact Type Bus Trunking/Rising Main for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints and expansion joints, fire barrier at each floor, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. 200 A Isc = 15kA for 1 second
72
486432
6756
Supplying, installing on wall or suspension on ceiling, testing and commissioning of following capacity Air Insulated Compact Type Bus Trunking/Rising Main for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints and expansion joints, fire barrier at each floor, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. 315 A Isc = 25kA for 1 second
72
517608
7189
Supplying, installation, testing and commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required 200 A 15kA SC for 1 second
2
9846
4923
Supplying, installation, testing and commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required 315 A 25kA SC for 1 second
2
10248
5124
Supplying, installation, testing and commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required 125 A 15kA SC for 1 sec
38
215764
5678
Providing Mechanical and Electrical interlocking system between main supply and DG supply MCCBs with suitable rating auxiliary contactor, under voltage coil and other required accessories etc. complete in all respect including fixing of the same and making necessary connections etc. up to the entire satisfaction of the engineer-in-charge of the work.
4
89300
22325
Supply and erection of G.I. tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with G.I. stapples of same size.
2100
306600
146
S/E of water cooler of stainless steel body with 150 ltr storage and 150 ltr. cooling capacity (make -USHA) ) with all petty material required the complete job in all respect.
40
1746720
43668
`Solar Water Heaters
Supply, erection, testing and commissioning of solar water heating system with following details : `
1. System capacity : 1000 LPD SUNPOT with Recirculating Pump
2. System temperature output : 60 deg. C
3. Operating Pressure : Non-Pressurized
4. Type of System : FPC
5. No. Of Collectors / Tubes : 08
6. Application : Bathing
7. Circulation : Non-Pressurized Flow
8. Support stands for collectors : MS painted structure
9. Tank type : SS 304
10. Tank Sizes : 1000 Ltrs.
11. Insulation : PUF/Rockwool / Glasswool insulation
12. Brands : NUETECH/ Equivalent
17
4362795
256635
Supply, Installation, Testing and Commissioning of armoured 6 core Single mode OS2 (9/125 Micro), Corrugated ECCS Armor, HDPE (UV) Sheathing, Theoxtropic gel filled OFC cable with 2 Nos steel music wire embedded in side sheathing as strength member for switch connectivity. Cable should be ROHS compliant and as per IEC60749-1 with product warranty of 30 years. Should fulfill the standard Compliance of ITU G.652.D (OS2), IEC 60794-1. Max. Attenuation: At 1310 nm (= 0.35 dB/km, At 1550 nm (=0.22 dB/km. Fibre/Tube Identification : Single Tube. Fibre protection (Tubes) : Polybutylene Terephthalate (PBT). Armouring :ECCS Armoring. Outer Sheath :UV Stabilised High Density Polyethylene (HDPE). Central Strength Member: 2 Nos of Steel Music Wire Embedded In Sheath Water Blocking :Water blocking tape. Gel filled: Thixotropic Jelly. Cable Diameter (D) :7.5 ± 0.5 mm. Armor Thickness : 1.5 mm. Mass (Nominal) :65 kg/km. Min. Bending Radius (during Installation) : 20 D:D-Outer Diameter. Max. Tensile Strength-Short Term : 1000N [IEC 60794-1-2-E1]. Max. Crush Resistance-Short Term : 2000N/100 mm [IEC 60794-1-2-E3]. Operating Temperature range : -20°C to plus 60°C IEC 60794-1-2-F1]. Storage Temperature range : -40°C to plus 60°C IEC 60794-1-2-F1].
Makes: Derwiser/Panduit/Legrand/ Systmax/ D-Link`
1300
157300
121
`Supply, Installation, Testing and Commissioning of 6F SM loaded LIU with LC adaptor plates, pigtel cables, Spilce tray, cable holder and 4 nos of cable entry exist point with rubber gurment along with the LIU, Powder Coaded 1.2mm steel sheet metal, 1U etc complete as required. LIU should be in accordance with YD/T 778-2006 Optical Distribution Frame and YD/T 1272.1-2003 Optical Fiber Connector Part 1: Type LC and should have 30 years of product warranty. Should have Slide type drawer structure, with Screw fit lock design. Compatible with«YD/T 1272.3-2005 Optical Fiber Connector Part 3: Type SC Compatible with«YD/T 1272.4-2007 Optical Fiber Connector Part 4: Type FC. Operating Temperature : -20°C to plus 55°C. The adaptor plate should be pre-loaded with LC/SC Type Single mode Duplex Adaptors.
Makes: Derwiser/Panduit/Legrand/ Systmax/ D-Link`
13
171327
13179
`Supply, Installation, Testing and Commissioning of LC-LC single mode OS2 (9/125) duplex, LSZH fiber patch cord for LIU to switch connectivity. Patch Cord should have aramid yarn as strength member with 1000 time mating cycle. Storage Temperature: -40°C to plus 85°C. Connector Insertion Loss: 0.20dB(Max). Attenuation: 1310/1550 : 0.30/0.20 dB/KM
Makes: Derwiser/Panduit/Legrand/ Systmax /D-Link`
84
161280
1920
`Supply, Installation, Testing and Commissioning of loaded 24 port CAT 6A UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable. Pre loaded with cable support Bar, Individual port transparent shutter and labelling point, Preloaded earthing plug for surge protection. UL and ETL Verified. CRC Metal with Black Powder Coated. RoHS Compliant, in accordance to ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards. Safety parameters as per UL 94V-0, Patch panel should be Enhanced with cable strain relief with retention tray: It should have integrated cable support Bar along with the panel Each port of the panel should have individual transparent labelling point Panel should be inbuild transparent spring shutter for dust protection on each port. Material: sub-rack made of Aluminum with dimension 44.4 mm : 482.6 mm : 105 mm (h:w:d) tray Information Outlet or connection module should comply with the specification mentioned above Panel should be supplied with earthing wire and earther lug with each panel ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards Should be RoHSand UL 94V-0 complied.
Makes: Derwiser/Panduit/Legrand/ Systmax/D-Link`
21
202650
9650
`Supply, Installation, Testing and Commissioning of loaded 8 port CAT 6A UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable. the establishing of transmission channels of class EA with up to 4 plugged connections, complies with Category 6A requirements of the standards ISO/IEC 11801:2.1 edition, IEC 60603-7-4 2nd Edition, EN 50173-1, ANSI/TIA/EIA 568-C.2,ANSI/TIA/EIA 568-D.2 backwards compatible with Cat6, Cat.5e and Cat.5. Suitable for 10GBase-T applications in acc. with IEEE 802.3an more than or equal to 500 MHz. Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB- and Universal tooland Toolless based connection of installation cables AWG 23 – 26. YDT926.3-2009 IDC termination should feature nil crossover in acc. with EIA/TIA 568-A/B, Tin phosphor bronze contacts for complying IEC 60603-7 Housing material: High impact flame retardant plastic (UL-94-V0) Jack Contacts: Phosphor bronze, 50 micro-inch gold over nickel plating of 40µ ~ 80µ Plug Retention Force: 30 lbs minimum
Dielectric Withstand Volt: DC1000V/AC750V 1min Contact Resistance: (= 20 mO Current Rating: 1.5A at 68°F Plug insertion Life: )=750 times plug in Temperature Test: -10°C to 68°C Material: RoHS complied Should be UL and ETL Certified.
Approved Makes: Derwiser/Panduit/Legrand/ Systmax/D-Link`
1
6072
6072
`Supply, Installation, Testing and Commissioning of CAT 6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. Number of conductors : 8. Stranding: 7 x 0.16 mm (26 AWG) Cable jacket characteristics: cable, metal-free Cable overall diameter: 6.1±0.3 mm Tube / Wire type: stranded conductor Insulation: foam skin, polyolefin, 0.98±0.02mm OD.
Plug: Feature cable retention, with enhanced pull strength. Cat 6A patch cord plug to have round cable holder and strain relief boot to avoid bending. plug should have high repeatability cross talk performance Plug design should be patented with unique feature Should be ETL certified.
Makes: Derwiser/Panduit/Legrand/ Systmax/ D-Link`
367
160379
437
`Supply, Installation, Testing and Commissioning of CAT 6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch to end user connectivity. Number of conductors : 8. Stranding: 7 x 0.16 mm (26 AWG) Cable jacket characteristics: cable, metal-free Cable overall diameter: 6.1±0.3 mm Tube / Wire type: stranded conductor Insulation: foam skin, polyolefin, 0.98±0.02mm OD.
Plug: Feature cable retention, with enhanced pull strength. Cat 6A patch cord plug to have round cable holder and strain relief boot to avoid bending. plug should have high repeatability cross talk performance Plug design should be patented with unique feature Should be ETL certified.
Makes: Derwiser/Panduit/Legrand/ Systmax/ D-Link`
367
179096
488
Supply, Installation, Testing and Commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accordance with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 and ISO/IEC 60603-7 white for I/O fixing at user side. Shutter Face Plate with elegant 2 Piece, hidden screw design ABS-UL94-V2, 86x86x12.8 (mm). Should support Operating Temperature: -10~ plus 60: Storage Temperature: -40~ plus 68: Humidity: 10%~90% RH. Material: ABS, UL 94V-0: Spring: Surface Finish: Polished.
Makes: Derwiser/ Panduit/ Legrand/ Systmax/ D-Link
367
49178
134
Supply, Installation, Testing and Commissioning of 15U wall mount rack with fans , 2 cable managers , stationary shelf , 2 Nos. of hardware pkts. Makes: Der Wiser/MTS/Rittal/APC/APW/ D-Link
10
111630
11163
Supply, Installation, Testing and Commissioning of Access switch should have 24 x10/100/1000T port, Min 4x 10 G based SFP plus port, 2x Stacking port comprising 160 Gbps of stacking bandwidth from day 1and should be stackable up to 10 switches. The switch should support redundant internal Hot swappable power supply. The Switch Should have 4K VLAN, 32K MAC Addresses, 5K IPv4 and IPv6 Routing, 2K Multicast Routes for both IPv4 and IPv6.The switch should support 2GB DRAM and 2 GB Flash. The switch should support IPv6, OSPFv3, RIPng , Policy based routing and BFD for any future requirement by adding a license. The device should be NDPP/NDcPP/Common Criteria Certified and should have IPv6 Ready Logo.
Make :Cisco/Juniper / Impulse / / D-Link`
8
1597288
199661
`Supply, Installation, Testing and Commissioning of 12 Port POE plus Access Switches with switching capacity of 128 Gbps, forwarding performance 95 Mpps, having 12 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 360W, with 4x 10G SFP plus uplink ports. Should have support for Stacking/VC with stacking bandwidth of maximum 80 Gbps. Should support min 2GB internal DRAM, 2GB internal Flash memory,16K MAC address, Should have static and RIP Routing from day 1 and should support OSPF, VRRP, IPv6 features including Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), Domain Name System (DNS) , OSPFv3 and static routing as well. (Switch OEM should be leader in Gartner quadrant data centre latest report)
Make : Cisco/Juniper / Impulse / / D-Link`
3
321480
107160
Supply, Installation, Testing and Commissioning of Industrial grade switch 8 x 10/100/1000Base-T Ports POE , 2 x Gigabit SFP Slots plus 1 Console Port , Available POE power 240W , 8K MAC address table , Ring recover time ( 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View , Dash board , traffic monitoring , Cable diagnostics , UL,CE,FCC Certified , IP 30 protection , DIN rail for wall mount , OPerating temperature -40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC .Certifications : IEC 60068-2-6 ,IEC 60068-2-27 ,IEC 60068-2-32 ,EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 ,EFT, EN61000-4-5 Surge, EN61000-4-6 CS, EN61000-4-8 PFMF ,FCC Part 15 Class A, (EN61000-3-2, EN61000-3-3,EN61000-6-4, EN61000-6-2, EN55022 Make :Cisco/ Juniper / Extreme / / D-Link
1
70158
70158
Supply, Installation, Testing and Commissioning of Stacking Cables complete in all respect.
Make :Cisco/ Juniper / D-Link`
13
113191
8707
`Supply, Installation, Testing and Commissioning of the Microservices based WLAN Architecture. The indoor AP should have radios to support 2.4Ghz and 5 Ghz band in a 4X4:4 Mu-MIMO configuration with support for 802.11 a/b/g/n/ac. The AP should have internal Omni Antennas and should support vBLE and RF optimization. It should also support way finding and asset tracking via Bluetooth. Should support Artificial Intelligence platform, WIPS/WIDS to detct Rogue APs and the facility to terminate connection to the Rogue APs. Plenum rated and support for UL 60950-1 CAN/CSAC22.2 No. 60950-1, FCC Part 15.247, 15.407, 15.107, and 15.109 RSS247 ICES003
Make :Cisco/ Juniper / Extreme/ D-Link`
79
4008460
50740
Supply, Installation, Testing and Commissioning of CAT 6 UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. Number of conductors : 8 Stranding: 7 x 0.20 mm (24 AWG) Cable jacket characteristics: cable, metal-free Cable overall diameter: 6.5±0.2 mm
Tube / Wire type: stranded conductor Insulation: solid polyolefin, 0.97±0.02 mm diameter Plug: Feature cable retention, with enhanced pull strength. Cat 6 patch cord plug to have round cable holder and strain relief boot to avoid bending. Jacket: LSZH complying to IEC 60754 -1,2 and 3, IEC 60134-2 Plug should be featured with color ring options Plug should have high repeatability cross talk performance.
Makes: Derwiser/Panduit/Legrand/ Systmax/ D-Link
180
55440
308
Supply, installation, testing and commissioning of 5 MP Dome camera , ONVIF profile S , Gand T ,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265 plus compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265 plus ,H.265 ,H.264 plus H.264 .SD card support upto 128GB , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection(deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 40 meters , IP 67 , IK10 ,POE. IR cut filter with auto switch Auto / Schedule / Triggered by Alarm In Motion Detection, Perimeter Intrusion, Line Crossing, Stationary Object, Pedestrian detection, Face detection (deep learning) ,Cross counting Flip Rotation Corridor mode, Saturation, Brightness, Contrast, Hue, Sharpness adjustable Yes, 120 dB WDR 1 input, 1 output, upto 128 GB,TCP/IP,HTTP, DHCP,DNS,DDNS, RTP /RTSP, PPPoE,SMTP,NTP,UPnP,SNMP,HTTPS, FTP, 1 X BNC, Available, Flash-prevention, dual stream, heartbeat, password protection, privacy mask, IP address filtering Should have the capability to digitally zoomed in web browser by selecting the area using mouse Should have the option of setting the configuration to factory default except network settings. Min 4 Nos of selectable privacy Zones Should support 1 admin and 6 user accounts Firmware upgrade shall be done through web browser Camera IP and firmware should be upgradable through the device search tool/Software without directly logging in to the camera. Firmware should also be upgradable through web browser Should support Defog mode Min IR distance 40 metersIK10 -30°C ~ 60°C Humidity 95% or less (non-condensing) OEM should not be blacklisted nationally or internationally.
Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis/ Hyundai
193
4050298
20986
Supply, installation, testing and commissioning of 5 MP Bullet camera , ONVIF profile S ,G and T . UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265 plus compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265 plus ,H.265 ,H.264 plus H.264 .SD card support , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP , Edge analytics : line crossing , perimeter intrusion ,Face detection (deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 50 meters , IP 67 , IK 10 housing , POE. Edge analytics Motion Detection, Perimeter Intrusion, Line Crossing, Stationary Object, Pedestrian detection, Face detection (deep learning) ,Cross counting Image setting Flip,Rotation,Corridor mode, Saturation, Brightness, Contrast, Hue, Sharpness adjustable Rotate Mode Yes WDR 120 dB WDR Alarm 1 input, 1 output, Audio 1 input, 1 output, SD Card support upto 128 GB Protocols TCP/IP,HTTP,DHCP,DNS,DDNS,RTP/RTSP,PPPoE, SMTP,NTP,UPnP, SNMP,HTTPS, FTP, Video output 1 X BNC Reset button Available Security Flash-prevention, dual stream, heartbeat, password protection, privacy mask, IP address filtering Digital Zoom Should have the capability to digitally zoomed in web browser by selecting the area using mouse Factory Default Should have the option of setting the configuration to factory default except network settings. Privacy Zones Min 4 Nos of selectable privacy Zones User accounts Should support 1 admin and 6 user accounts Firmware upgrade Firmware upgrade shall be done through web browser Remote Update Camera IP and firmware should be upgradable through the device search tool/Software without directly logging in to the camera. Firmware should also be upgradable through web browser Defog Should support Defog mode IR Distance Min IR distance 50 meters Operating Temperature -30°C ~ 60°C Humidity 95% or less (non-condensing).
Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis/ Hyundai
20
490000
24500
`Supply, Installation, Testing and Commissioning of Rack Mounted Industrial 24 port L2 plus Managed switch having 24*10/100/1000Base-T POE ports,4*100/1000Base-X uplink SFP ports ,1*RS232 Console port. Forwarding Rate @ 64 byte 38.69Mpps .Operation TEMP / Humidity -40~ plus 85°C. Security Port Security (MAC-based) , IP Source Guard ,Storm Control ,RADIUS Authentication 802.1x , TACACS plus Authentication ,HTTPs and SSL (Secured Web) ,BPDU Guard ,STP Root Guard ,DHCP Snooping, Loop Protection DHCP Client , Relay , Option 66 , Option 67 , Option 82 Event/Error Log Syslog , SMTP (RFC821) Management Access Filtering SNMP , Web , Telnet , SSH PoE Management Scheduling ,Auto-Checking ,Power Delay SNMP (v1, v2c, v3) , RMON ( 1,2,3 and 9 Groups) , Software Upgrade Configuration Export/Import , Port Mirroring , LLDP (IEEE802.1AB) LLDP-MED (IEEE802.1AB) CDP Aware ,sFlow ,IPv6 Management , NTP Device Management Topology View , Floor View ,Map View .dashboard ,Traffic Monitoring , Cable Diagnostics Operating Temperature 0°C to 40°C Operating Humidity 10 to 90% RH Storage Temperature -20 to 70°C Storage Humidity 10 to 90% RH AC Input 100V-240V Certifications EN61000-4-5 (for RJ45 Port, Surge 6KV) ,CE/FCC Class A.
Make :Cisco/ Impulse / Juniper / Nexxus/ D-Link
10
1339500
133950
Supply, Installation, Testing and Commissioning of Industrial grade switch 4 x 10/100/1000Base-T Ports POE plus 2 x Gigabit SFP Slots plus 1 Console Port , Available POE power 120W , 8K MAC address table , Ring recover time ( 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View , traffic monitoring , Cable diagnostics , UL,CE,FCC Certified , IP 40 protection , DIN rail for wall mount , Operating temperature -40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC .
Make :Cisco/ Impulse / Juniper / Nexxus/ D-Link
1
50455
50455
Supply, Installation, Testing and Commissioning of Addressable Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5 to 4.0% obs/ft. The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg. viewing. Addressing shall be with user friendly rotary decimal switches. UL268, 7th Edition and FM Approved. DSR 17.2.4. (Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohmi / Gamewell)
Below False Ceiling
14
28462
2033
Supply, Installation, Testing and Commissioning of Addressable Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5 to 4.0% obs/ft. The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg. viewing. Addressing shall be with user friendly rotary decimal switches. UL268, 7th Edition and FM Approved. DSR 17.2.4. (Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohmi / Gamewell)
Above False Ceiling
66
134178
2033
Supply, installing, testing and commissioning of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches UL268, 7th Edition and FM Approved. DSR 17.2.9.
Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohmi / Gamewell / Honeywell
20
38760
1938
Supply , Installation , Testing and Commissioning of Remote Indicator ( RI) High visibility LED, Wide viewing angle for increased visibility, Discreet design for incorporation in to any décor. RI should be of same make as detectors and devices. DSR 17.2.5.
Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohmi / Gamewell / Honeywell
36
6768
188
Supply , Installation , Testing and Commissioning of Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state and get steady on activation to monitor the heath status of the device. DSR 17.2.14.
Makes :Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell
79
161318
2042
Supply, Installation, Testing and Commissioning of Addressable Monitor Module for Sprinklers, Panic Bars and other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state and get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation and maintenance.
Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell
10
26430
2643
Supply, Installation, Testing and Commissioning of Addressable Control Module for Sounders / Strobes / Sounder cum Strobes. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state and get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation and maintenance. DSR 17.2.11.
Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell
79
183675
2325
Supply, Installation, Testing and Commissioning of Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector and module. The device shall have an LED which shall blink in normal state and get steady on activation to monitor the heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation and maintenance. DSR 17.2.7.
54
125658
2327
Supply, installing, testing and commissioning of Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression and other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state and get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation and maintenance.
Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell
8
24288
3036
Supply , Installation , Testing and Commissioning of Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication. UL Listed. DSR 17.2.6.
Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell
79
148915
1885
Supply , Installation , Testing and Commissioning of Microprocessor based Multi-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall be complete with 2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. Designed to meet UL864, 10th Edition DSR 17.2.1. (Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell) 03 Loop
2
535800
267900
Supply , Installation , Testing and Commissioning of Microprocessor based Multi-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall be complete with 2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. Designed to meet UL864, 10th Edition DSR 17.2.1.
Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell
01 Loop
2
178600
89300
Supply , Installation , Testing and Commissioning of Network Repeater Panel with minimum 10`` Color Touch Screen display with QWERTY Keypad, mapping minimum 2,00,000 points on network. The NRP shall act as an independent node communicating on the peer to peer network and shall not be dependent on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP operation. DSR 17.2.3.
Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell
4
310256
77564
Supply , Installation , Testing and Commissioning of Addressable Fire Fighter`s Telephone Jack with suitable supervised module for two way communication between Remote Fire Fighter and Fire Command Center. UL Listed. DSR 17.2.19.
Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell
69
78246
1134
Supply , Installation , Testing and Commissioning of Fire Fighter`s Telephone Handset for two way communication between Remote Fire Fighter and Fire Command Center.
Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell
8
85728
10716
Supplying and Laying of 2 C X 1.5 Sq mm multi stranded twisted shielded FRLS Copper cable.
makes : Polycab/ RR Kabel/ Paramount/ Parasheild
4975
288550
58
Supply, installing, testing and commissioning of 6W Ceiling Speaker with max SPL1M/1W 96dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tappings at 6W/3W/1.5W
Makes : Actis / Honeywell / Bosch
45
60300
1340
Supply, installing, testing and commissioning of 6W Wall mount Speaker with max SPL1M/1W 96dB. Frequency response of 160Hz-20KHz. The speaker should have tappings at 6W/3W.
Makes : Actis / Honeywell / Bosch
1
2233
2233
Supply, installing, testing and commissioning of 8 zone IP based, digital Voice Alarm controller expandable upto 128 zones. The voice alarm controller should be able to connect directly over Ethernet. It should have functions like the audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover. The Voice alarm controller should also have the following functions: . 255 Priorities . Time schedule broadcasts . Its own PTT microphone . Capable of amplifier redundancy . 8 trigger inputs/outputs Makes :Actis / Honeywell / Bosch
3
790305
263435
Supply, installing, testing and commissioning of 1X500W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection. (Approved Makes :Actis / Honeywell / Bosch) 500 Watts
3
442035
147345
Grouting the joints of flooring tiles having joints of 4mm width, using epoxy grout mix of 0.70kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-In-Charge (Derived rate based on HSR 10.70.3) Size of tile 800mm x 800mm
185.26
34273
185
Grouting the joints of flooring tiles having joints of 3mm width, using epoxy grout mix of 0.70kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-In-Charge (Dervied rate based on HSR 10.70) Size of tile 400mm x 400mm
2215.2
405381
183
Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means.
i for 4 to 6th floor
2338.18
346050
148
Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means.
ii for 7 to 8th floor
2075.03
614208
296
Providing and fixing of 8 mm thick Laminated wooden flooring Classification of Use 23/32 (Heavy Domestic/General Commercial) with a Surface Abrasion Resistance of class AC4 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density ) 850 Kg/M3) of plank size 1291 mm X 135 mm having Uni fit locking arrangement (lock strength ) 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge).
473.82
881779
1861
Providing and fixing of Medium Duty hollow metal fire rated wood finish doors as per IS 3614:2021, for stability,integrity and insulation. Pressed galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall be tested to IS/ ISO 834-1,IS/ISO 3008 CBRI / warrington/TBW, for maximum rating of 120mins with 30minutes of insulation. Labled fire doors shall be with fire rated hardware and vision panel all as a complete assembly. Manufacturer test certificate shall cover sizes of all doors supplied, deviation in sheet thickness other than what is mentioned in the BOQ are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Door frame must be single rebate grooved profile of size 125 x 75mm made out of 1.60mm (16gauge) minimum thick galvanized graintech steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted and butted joints are not acceptable. Frames to have inbuild grooved sealing system and shall be site fitted with fire rated EPDM C421 gasket as standard. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening.Once frame installed should be filled with PUF as recomended by the manufacturer or engineer incharge. Door leaf shall be minimum 60mm thick fully flush double skin door, Insulated with or without vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised graintech steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware make. The infill material shall be high density insulation mineralwool of 120kg/sq.mt density. Intumescent seals 15 x 1.5mm to be provided all around the door in addition to the grooved smoke seal. The edges should be interlocked with a bending radius of 1.4mm, without any tak welding on edges. For pair of doors integral astragals has to be provided on the meeting stile for both active and inactive leaf. No surface mounted or weld joint astragals are acceptable. Vision lite wherever applicable should be 6mm clear borosilicate fire rated glass as per manufacturers recommendation with a clipon arrangement. All doors and frames shall be wood finished and shall have passed minimum 500 hours of salt sprey test. Rate shall include supply and installation of frame and shutter as a complete assembly including hardware as per door elevations.
80
2433520
30419
Providing and fixing Glass Reinforced Concrete (G.R.C) Screens casted with `Spray Mix` concrete design in approved size, pattern, thickness of 50mm on the outer Border and 25-30mm for Internal member and shade. The Screens should be made from ‘53 grade’ White Portland Cement , White Quartz fine graded sieved Silica Sand, Alkali Resistant Glass Fibre , Super Plasticizers , Polymers and U.V resistant Synthetic inorganic pigments should be used for pigmentation . The Screens casting shall take place with layering methodology using- Direct Power Spray machines. The GRC Screens flexural strength average L.O.P should be above or equivalent to 6 N/mm2 and M.O.R should be above or equivalent to 15 N/mm2 for tests done on 28 days cured samples. The fixing of Screens should be done using ‘Dry fixing’ method onto structural support members i.e. R.C.C, Brick work, MS Framework. SS / MS Galvanized CLAMPS and PINS also if required fasteners to be used . ALL CAST IN SOCKET TO BE EPOXY PRIMER COATED. ELECTRODES to be used . Vendor shall submit shop drawings of same, the drawings to be duly approved from Engineer in charge at site.
979.11
4946463
5052
Supply and Installation of Wet cleaning of Painted elevation/Exposed Bricks/Sand Stone/Red clay tiles/ GRC Screens with High Pressure Jet with minimum 120 bar pressure to wipe out foreign particles on the surface and then allow the surface to dry for at-least 24 Hours .As a second step, providing and applying ` Anti- Fungal Water Repellent Coating ` consisting of having accreditation from CBRI Roorkee on elevation by spraying complete in all respect and heights over dry surface as per direction of the manufacturer and Engineer-in-charge complete in all respect
979.11
395560
404
Providing and Fixing Pristine white uPVC windows make: Fenesta or equivalent make Company must have own production facilities (extrusion and fabrication) and control the entire cycle from Extrusion to Installation to Post Sales Service. Profile frame of high impact modified grade uPVC, which shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation and validation complying with IS-875- III before material supply. Minimum steel reinforcement thickness of 1.2mm to 2.5mm. uPVC Windows must be fabricated with fusion welded corners and must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted must be of SS 304 grade for coastal areas and for non-coastal it should be Non-SS,except handles to be of zinc/Al. alloy casted with powder coated with weather seal (EPDM/TPE). There would be Warranty of 10 years on Profile and one year on hardware from the date of installation. UPVC windows must be installed by profile manufacturer only.
Casement/Villa Window with mesh panel (Big Series):
Providing and Fixing Casement Window with mesh panel of Outer frame 118mm X 58mm and Sash of 65mm X 80mm, wall thickness of profile must be min 1.8± 0.3mm, single glazing bead of appropriate dimension for 6mm clear toughened Glass and SS/ Fibre Mesh.
1132.61
15171310
13395
Providing and fixing of Hollow metal Insulated fire rated doors as per IS 3614, for stability, integrity and insulation. Pressed galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall be tested to IS 3614 part 2 / ISO 834-1 Part 1 / BS476 Part 20 and 22, for maximum rating of 120mins with 30minutes of insulation, certification shall be with vision glass as a part of complete assembly. Manufacturer test certificate shall cover doors both single and double leaf and all doors supplied shall be within the tested specimen, deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Door frame shall be single rebate grooved profile of size 125 x 55mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field assembled with self tabs. Frames to have inbuild grooved sealing system and shall be site fitted with fire rated EPDM gasket as standard. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with fire rated puff.
Door leaf shall be 46mm thick fully flush double skin door, insulated with or without vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be high density insulation material.Intumescent seals 15x2mm to be provided all around the door in addition to the grooved smoke seal. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clipon arrangement. The glass should be 6mm clear borosilicate fire rated of relavant rating of the door along with ceramic tape all around of glass on both side. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test. Rate shall include supply and installation of single leaf door of size 1200x2100 with below hardware-
3no ball bearing butt hinges 100x75x3mm of SS304 of approved make
1no surface mounted slide arm door closer EN 3-5 of approved make 1no single point panic bar plus external Trim for single leaf door of approved make smoke seal for frame of groove type of approved make Intumecent seal for all around shutter of approved make 1no 6mm thick 120minutes fire rated vision panel of size 200x300mm including ceramic tape of approved make
10
400250
40025
6mm thick Heat strengthened performance glass with reflective soft coating at face # 2 of silver shade on Clear Substrate of approved make having properties as visible Light transmittance (VLT) of 20 %, Light reflection internal 26%, light reflection external 31 %, Solar heat gain coefficient (.28), shading coefficient (0.33) and U value of 3.5 W/m2 degree K ,CRI value 92ra(d65). (VLT) of 20 %, Light reflection internal 26%, light reflection external 31 %, Solar heat gain coefficient (.28), shading coefficient (0.33) and U value of 3.5 W/m2 degree K ,CRI value 92ra(d65).
807.64
1275263
1579
Supply and Installation of Aluminium 50 BD Ventilated Façade / Louver System of approved white colour consisting of panel 50 mm wide x 50mm depth x 0.6mm thick panel length up to 5mtrs coil coated on a continuous paint line double baked and roll formed from enameled corrosion Resistance Aluminum Alloy AA3005 / AA5050 for higher strength and good Roll forming characteristics. Panels shall be mounted in a module of 150 mm on a mullion profile grooved (Slotted Fastening Profile) by means of Clamp, Locking Pop and Pop Rivet. Slotted Fastening Profile shall be fixed at 150 mm from panel ends and at a distance of maximum 1200 mm center to center across the panel span and Slotted Fastening Profile shall be fixed to a suitable sub-structure by means of Square Brackets. Paint Finish:Panel shall be stove enamelled and finished with Luxacote, a patented special three layered coating system (consisting of first a conversion layer of thickness 800-2000mg/sq mtr, a polyurethane basecoat of 16-20 microns, and a special top coat of polyamide particles of 8-12 microns thick to provide excellent abrasion and damage resistance) in a continuous coil coating process of the approved colour on the exposed side and the reverse side with epoxy.
918.54
8686632
9457
RO Plant 500 LPH (Liter per hour)
PLANT CAPACITY - 500 LPH RECOVERY -50% ELECTRICAL CONNECTION - 415 V, 3 PHASE, 50 HZ TDS - ( 100 PPM
1000L STORAGE TANK AND DRINKING FOUNTAIN
4
1675312
418828
Providing and fixing Electric Chimney in Kitchen 900mm wide complete in all respect, having modal (ooker Hoods revio 90 hindware) or equivalent.
44
803132
18253
Providing and fixing 18mm thick plasto board (weight minimum 35.00 kg per board of size 8` x 4`) (heavy grade) (Sintex or equivalent) for kitchen, cupboard etc. inclding acessories for fixing such as adhesive screws, beadings etc. complete in all respect
8742.18
23297909
2665
Providing and fixing 25 mm thick finished red stone both side slightly rounded for partition and shelves in CB.
387.84
261016
673
`Fixing, testing and commissioning of Wall Mounted C.P. Brass Single lever Sink Mixer with swinging spout of required size including cuttinig and making good the wall wherever required as per entire satisfaction of Engineer-in-charge Kitchen Sink Mixer (Make CERA or equivalent)`
58
274804
4738
Powder coated folding handle 100 mm
1545
117420
76
Fixing, testing and commissioning of concealed divertor set comprising of C.P Wall mixer concealed in wall, wall sport, overhead shower head with C.P shower arm with swivel joint, C.P brass wall Flange complete including cutting and making good the wall whereever required. Concealed divertor, Head shower and spout as per entire satisfaction of Engineer-in-charge (Make CERA or equivalent)
324
4195152
12948
Providing and fixing SS Handel 12 inch(as approved by Engineer incharge) including accessories for fixing such as Nails and screw etc complete in all respect
240
113760
474
Supply, Installation, Testing and Commissioning of fiber Modules 10BASE Approved Make :Cisco/ Juniper / Extreme/ D-Link/ HP/ Alcatel
14
425068
30362
Supply, Installation, Testing and Commissioning of loaded 8 port CAT 6 UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable termination at rack end. Pre loaded with cable support Bar, Individual port transparent shutter and labelling point, Preloaded earthing plug for surge protection. UL and ETL Verified. CRC Metal with Black Powder Coated. RoHS Compliant, in accordance to ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards. Safety parameters as per UL 94V-0, Patch panel should be Enhanced with cable strain relief with retention tray: It should have integrated cable support Bar along with the panel Each port of the panel should have individual transparent labelling point Panel should be inbuild transparent spring shutter for dust protection on each port. Material: sub-rack made of Aluminum with dimension 44.4 mm: 482.6 mm : 105 mm (h:w:d) tray Information Outlet or connection module should comply with the specification mentioned above Panel should be supplied with earthing wire and earther lug with each panel ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards Should be RoHS and UL 94V-0 complied.
Approved Makes: Derwiser/Panduit/Legrand/ Systmax/ D-Link/ Simon/ Molex/ Belden
1
5626
5626
Grouting the joints of flooring tiles having joints of 4mm width, using epoxy grout mix of 0.70kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-In-Charge Size of tile 600mm x 600mm (Derived Rate of HSR 10.70.2)
20633.67
3817228
185
Bricks
382.8
-1148400
3000
Brick bats
523.35
-314010
600
Door
208
-31200
150
Window
238
-19040
80
SITC of Workstation as per minimum following technical specification: 1 Processor i5 processor , 6-Core, 12M Cache, 2.6GHz to 4.4GHz, 12th Generation 2 Chipset Intel/AMD Compatible Chipset 3 Memory 16 GB DDR4 RAM expandable up to 64GB with 2 DIMM slots 4 Hard disk Drive 1TB SATA (7200 Rpm) Hard Drive. 5 Optical Drive DVD plus /-RW drive 6 Graphics 4GB UHD Graphic card minimum 4 HDMI video output
7 Ethernet Integrated 10/100/1000 Mbps ethernet controller: 8 Slots 2 PCIe x1 slots, 1 PCIe x16 slot 9 I/O ports 8 External USB: 4 x USB 3.2 and 4 x USB 2.0: 1 RJ-45: 1 VGA Port:1 HDMI Port: 1 DisplayPort 10 Wireless Wireless 802.11 b/g/n/ac with Bluetooth 11 Audio Port 1 Universal Audio Jack,, Internal Speaker 12 Monitor 21 inch or higher IPS LED Backlit monitor with FHD resolution, (same make as PC) 13 Keyboard USB Keyboard (same make as PC) 14 Mouse 2 Button USB Optical Mouse (same make as PC) 15 Operating System Windows 11 64 Bit preloaded.
16 Antivirus Licensed antivirus 17 Regulatory Certifications FCC,UL, ROHS, Windows, Linux
1
225000
225000
Supply, installation, testing and commissioning of NVR, 64 Channel , with Incoming and out going bandwidth of 320 Mbps each , 8 SATA port , with minimum 40 TB ( 4 X 10 TB) storage with below mentioned minimum features: supporting channel :64 channels Bandwidth :320 Mbps (Incoming)/320 Mbps (Outgoing)
Recording Resolution:UP to 8 MP
Video Output:1 or 2 HDMI Ports
USB interface:1xUSB 3.0, 2XUSB 2.0 Raid :RAID 0/1/5/6/10
Minimum Storage :Minimum 8 SATA ports (Support up to 10TB Each SATA Port)
Alerts:Generate alerts for camera or equipment malfunction and replacement, HDD failures, HDD tampering, etc
Auto start/ Resume :should be capable of auto start/Resume operations post power fluctuation/ failure Access Management:Feature to limit access to storage data with access management Connectivity Interface:2 Nos. x 10/100/1000 Base-T Lan Port
Backup and other Interface:1 e-SATA Port
Protocols:NTP, SNMP Operating Condition:0°C to 55°C, humidity 80% (max) Alarms I/O:Minimum - 1 Alarm input ports and 1 Alarm Output Ports
System Capability:Should be ONVIF Profile G, S and T
Note: Quoted Model should be listed on ONVIF website and NVR OEM should not be blacklisted by ONVIF.
Certifications :BIS Certified,UL/CE/FCC
Additional feature :Auto sync - SD card to NVR, Auto resume ,support required for integration with Jail ERP system VMS: Must have pre-loaded VMS, OnVIF complaint capable of integrating with Jail ERP system
2
396000
198000
SITC of Commercial grade 55 inch DISPLAY UNIT having following technical specification 1.Display Size: 55 inches or more 2.Resolution and built in:3840 x 2160 (UHD) ,4K 3.AUDIO: Advanced Audio
4.Built in :Bluetooth Connectivity (optional), built in Wi Fi, 5.Built in Speaker:20W 6.Others:HDMI X 3, DP X 1,USB X1 ,RJ45 X 1 , Digital audio out. 7.Brightness:300 cd/m2 or better 8.Dashboard feature:SNMP support to take control of display to check, Diagnose and Corrections through LAN network, Wake on LAN 9.Operation Temperature:0 °C to 40 °C or better, humidity 80% 10.Warranty: 3 years onsite 11.Mounting:Wall mount and table mount both 12.Display Type:24x7 working compatibility 13.Certificates and Approvals: BIS, ISO 9001, CB/UL
4
225000
56250
S/I/T/C of IP PBX 250 Channel with all labour and petty material reqd. to complete in all respect upto the entire satisfaction of Engineer-in-Charge 1) Channel : Max. 250 No. 2) Max Concurrent Calls: 300 Concurrent Calls with G.711 Codec: 100 Concurrent Calls with G.729 Codec or better 3) FXS Ports : 1 or more 4) FXO Ports : 1 or more 5) Protocol SIP (RFC3261), IAX2 6) Transport Protocol UDP, TCP, TLS, SRTP 7) Codec:G711 (alaw/ulaw), G722, OPUS, AMR-NB/WB, SILK, G723.1, G726, G729, GSM, ADPCM, iLBC, H263, H263P, H264, VP8 8) DTMF In-band, RFC2833, SIP INFO 9) LAN :1* 10/100M 10) WAN :1* 10/100M 11) IP Services : Static IP, DHCP, VPN, Firewall, PPPoE, Bridge 12) Recording : 86,000 mins (.gsm): 9,500 mins (.wav) or better 13) Firewall :Yes 14) T.38 Fax :Yes 15) External Storage : SD Card , up to 1288gb or better 16) USB :1 17) MIC Interface : 1 18) SPK Interface : 1 19) Power Consumption 12V/2.33A, 16W Max 20) Operating Temperature :0°C to 50 °C 21) Storage Temperature :-20 °C ~ 65 °C
1
95000
95000
Extra for grouting the joints of floor tiles having joints of 4 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 800x800mm
719.71
84925
118
Providing and applying 12-15mm ready mix/ ready plaster RP cement based plaster mortar having density 1500-1600 per m cum and compressive strength in 28 days 10-12MPA on cement concrete/ reinforcement concrete/ brick work / AAC block fof approved make as per satisfaction of Engineer in Charge
16047.88
4268736
266
Supply and erection of LED Flood light 200 Watt, operation on single phase AC supply complete in all respect up to the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.
10
93640
9364
Supply and Erection of water cooler SP body with 150 ltr /hr and 150 ltr storage capacity, complete with all labour and petty material required i/c making necessary connections upto entire staisfaction of Engineer-in-Charge of the work.........(-)
40
1593332
39833.3
Steel.
42790.4
-1283712
30
Structural steel
10204.96
-306148
30
Aluminium
282.69
-48057
170
`Lifts Supply , Installation , Testing And Commissioning of Passenger Lift system in multistorey blocks . All items to include providing all materials and it`s assembly at site , labour, Tandps, consumables etc. required at your site as per specification and drawings and directed by Engineer-in-Charge including transit insurance and storage insurance at site till handing over. Supplier shall provide NOC and inspection certificate from the Lift Safety Septt. of Govt. / Statutory body (Confirming IS -14665 Specifications) Make- Schneider/OTIS/KONE/MISTUBISHI/ ORBIS` Car Type - Stainless steel car in hair line finish 1.22 BG, infrared curtain. Door Size - Maximum available in above category of lifts with Ceramic Flooring
Door operation - Automatic centre / Side opening (as required) fire rated door with V3F drive.
Operator Door protection - Continues full infrared Door Protection
Other Provisions to be made in each lift :-
1) Combined luminous hall button with digital hall position indicator at all floors.
2) Integral full height car operating panel with luminous braille buttons , digital car position indicator combined with direction arrows, overload warning indicator.
3) Standard Electrical fittings of Phillips, Havell’s, Bajaj, Crompton greaves or equivalent. Lux Level 150
4) Voice Floor Announcement System with background music
5) Battery operated alarm bell and emergency light.
6) Emergency Rescue Device with 15 min. backup as per latest amendment of Haryana State Lift Act.
7) Fireman`s switch at main lobby.
8) All cables fittings of standard make from distribution board provided. Face plate finish - stainless steel in hairline finish 1.22 BG face plate shape – rectangular
9) Control - A.C. variable voltage variable frequency (with close loop) Operation - Independent IBMS Compatible
10) Machine - Gearless placed directly above the hoist way with regeneration.
11) Car panel - Stainless Steel Panels , SS car door, SS landing door (All Stainless Steel are in hair line finish 1.22 BG)
12) Hand Rail - SS hand rail at 900mm all three side.
13) Ventilation Fan / Blower
14) Fireman`s switch for each lift as tire law.
Above to include supply of mandatory spares and tools for free comprehensive maintenance of 36 months from the date of handing over and obtaining clearances from statutory bodies, any extra steel structure as required at site. Passenger Lift for Girls/ Boys Hostel
Capacity - 13 Persons (Load 884 Kg.) Speed - @ 1.5 mps
Travel (Max.) - G plus 8 floor (9 Stops /9 Landings)
Lift Well size as per site
8
16109720
2013715
`Lifts Supply , Installation , Testing And Commissioning of Passenger / Bed / Service Lift system in multi-storey blocks . All items to include providing all materials and it`s assembly at site , labour, Tandps, consumables etc. required at your site as per specification and drawings and directed by Engineer-in-Charge including transit insurance and storage insurance at site till handing over. Supplier shall provide NOC and inspection certificate from the Lift Safety Septt. of Govt. / Statutory body (Confirming IS -14665 Specifications) Make- Schneider/OTIS/KONE/MISTUBISHI/ ORBIS` Car Type - Stainless steel car in hair line finish 1.22 BG, infrared curtain. Door Size - Maximum available in above category of lifts with Ceramic Flooring
Door operation - Automatic centre / Side opening (as required) fire rated door with V3F drive.
Operator Door protection - Continues full infrared Door Protection
Other Provisions to be made in each lift :-
1) Combined luminous hall button with digital hall position indicator at all floors.
2) Integral full height car operating panel with luminous braille buttons , digital car position indicator combined with direction arrows, overload warning indicator.
3) Standard Electrical fittings of Phillips, Havell’s, Bajaj, Crompton greaves or equivalent. Lux Level 150
4) Voice Floor Announcement System with background music
5) Battery operated alarm bell and emergency light.
6) Emergency Rescue Device with 15 min. backup as per latest amendment of Haryana State Lift Act.
7) Fireman`s switch at main lobby.
8) All cables fittings of standard make from distribution board provided. Face plate finish - stainless steel in hairline finish 1.22 BG face plate shape – rectangular
9) Control - A.C. variable voltage variable frequency (with close loop) Operation - Independent IBMS Compatible
10) Machine - Gearless placed directly above the hoist way with regeneration.
11) Car panel - Stainless Steel Panels , SS car door, SS landing door (All Stainless Steel are in hair line finish 1.22 BG)
12) Hand Rail - SS hand rail at 900mm all three side.
13) Ventilation Fan / Blower
14) Fireman`s switch for each lift as tire law.
Above to include supply of mandatory spares and tools for free comprehensive maintenance of 36 months from the date of handing over and obtaining clearances from
statutory bodies, any extra steel structure as required at site.
Bed Lift
Capacity - 20 Passenger/1360Kg Speed - @ 0.75/ 1.5 mps
Travel (Max.) - S plus 9 floor (10 Stops / 10 Landings)
Lift Well size as per site
1
2634350
2634350
`Lifts Supply , Installation , Testing And Commissioning of Passenger / Bed / Service Lift system in multi-storey blocks . All items to include providing all materials and it`s assembly at site , labour, Tandps, consumables etc. required at your site as per specification and drawings and directed by Engineer-in-Charge including transit insurance and storage insurance at site till handing over. Supplier shall provide NOC and inspection certificate from the Lift Safety Septt. of Govt. / Statutory body (Confirming IS -14665 Specifications) Make- Schneider/OTIS/KONE/MISTUBISHI/ ORBIS`
Car Type - Stainless steel car in hair line finish 1.22 BG, infrared curtain. Door Size - Maximun available in above category of lifts with Ceramic Flooring
Door operation - Automatic centre / Side opening (as requried) fire rated door with V3F drive.
Operator Door protection - Continuas full infrared Door Protection
Other Provisions to be made in each lift :-
1) Combined luminous hall button with digital hall position indicator at all floors.
2) Integral full height car operating panel with luminous braille buttons , digital car position indicator combined with direction arrows, overload warning indicator.
3) Standard Electrical fittings of Phillips, Havell’s, Bajaj, Crompton greaves or equivalent. Lux Level 150
4) Voice Floor Announcement System with background music
5) Battery operated alarm bell and emergency light.
6) Emergency Rescue Device with 15 min. backup as per latest amendment of Haryana State Lift Act.
7) Fireman`s switch at main lobby.
8) All cables fittings of standard make from distribution board provided. Face plate finish - stainless steel in hairline finish 1.22 BG face plate shape – rectangular
9) Control - A.C. variable voltage variable frequency (with close loop) Operation - Independent IBMS Compatable
10) Machine - Gearless placed directly above the hoistway with regenaration.
11) Car panel - Stainless Steel Panels , SS car door, SS landing door (All Stainless Steel are in hair line finish 1.22 BG)
12) Hand Rail - SS hand rail at 900mm all three side.
13) Ventilation Fan / Blower
14) Fireman`s switch for eachlift as tire law.
Above to include supply of mandatory spares and tools for free comprihasive maintenance of 36 months from the date of handing over and obtaining clearances from
statutory bodies, any extra steel structure as required at site. Passenger Lift
Capacity - 13 Persons (Load 884 Kg.) Speed - @ 1.5 mps
Travel (Max.) - S plus 9 floor (10 Stops /10 Landings)
Lift Well as per site
1
2089620
2089620
Supply, Installation, Testing and Commissioning of CAT 6A UTP Universal (both tool and toolless) information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have minimum 750 mating cycle and 200 insertion cycle and UL approved, for Data, Voice, and Wi-Fi at user end. the establishing of transmission channels of class EA with up to 4 plugged connections, complies with Category 6A requirements of the standards ISO/IEC 11801:2.1 edition, IEC 60603-7-4 2nd Edition, EN 50173-1, ANSI/TIA/EIA 568-C.2,ANSI/TIA/EIA 568-D.2 backwards compatible with Cat6, Cat.5e and Cat.5. Suitable for 10GBase-T applications in acc. with IEEE 802.3an more than or equal to 500 MHz. Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB- and Universal tooland Toolless based connection of installation cables AWG 23 – 26. YDT926.3-2009 IDC termination should feature nil crossover in acc. with EIA/TIA 568-A/B, Tin phosphor bronze contacts for complying IEC 60603-7 Housing material: High impact flame retardant plastic (UL-94-V0) Jack Contacts: Phosphor bronze, 50 micro-inch gold over nickel plating of 40µ ~ 80µ Plug Retention Force: 30 lbs minimum Dielectric Withstand Volt: DC1000V/AC750V 1min Contact Resistance: (= 20 mO Current Rating: 1.5A at 68°F Plug insertion Life: )=750 times plug in Temperature Test: -10°C to 68°C Material: RoHS complied Should be UL and ETL Certified. Makes: Derwiser/Panduit/Legrand/ Systmax/ D-Link`
367
141295
385
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pins, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
812
2041368
2514
Supply, Installation , Testing, commissioning of Analogue Telephone, Caller ID, 30 Call Log, 5 Re-Dial memory, LCD (7 Segment 2 Line), Handsfree Speaker Phone, Slim Design, Batteries not required, draws power from Telephone line/PBX complete in all respect.
58
76328
1316
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements