Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Haryana Police Housing Corporation - HPHC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date11 Jul 2024
Closing Date1 Aug 2024
Tender Amount₹ 1,36,01,952
Costs
EMD
₹ 2,72,000Document Cost
₹ 15,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HBC_389008_1Bid Award Id
ViewTender No
2024768B3BDD EC2A 43E6 817D AE12ADFDBBD357HHCTender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
HSR Item 5.23.2-Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2.
Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix)
HSR Rate(Rs.) 1149.00 Through Rate
329.62
378731
1149
HSR Item 5.29.1-Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1. Of area 3 sq. metres and below
HSR Rate(Rs.) 108.00 Through Rate
29
3132
108
HSR Item 5.44-Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
HSR Rate(Rs.) 54.00 Through Rate
798.71
43130
54
HSR Item 5.45-Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
HSR Rate(Rs.) 33.00 Through Rate
37.37
1233
33
HSR Item 6.14.1-Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III): 3 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 4374.00 Through Rate
21.6
94456
4374
HSR Item 6.15.1-Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size)
HSR Rate(Rs.) 5969.00 Through Rate
3.71
22144
5969
HSR Item 6.16-Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). HSR Rate(Rs.) 6113.00 Through Rate
15
91682
6113
HSR Item 6.29.1-Centering and shuttering including strutting, propping etc. and removal of form work for : 1. Foundations, footings, bases for columns
HSR Rate(Rs.) 155.00 Through Rate
69.97
10845
155
HSR Item 6.29.3-Centering and shuttering including strutting, propping etc. and removal of form work for : 3. Columns, piers, abutments, pillars, posts and struts
HSR Rate(Rs.) 261.00 Through Rate
41.07
10717
261
HSR Item 6.30.5-Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers
HSR Rate(Rs.) 296.00 Through Rate
84.98
25152
296
HSR Item 6.30.6-Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts
HSR Rate(Rs.) 262.00 Through Rate
38.42
10064
262
HSR Item 6.34.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more.
HSR Rate(Rs.) 61.00 Through Rate
3447.75
210312
61
HSR Item 7.22.1-Brick work with common burnt clay non- modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in
: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)
HSR Rate(Rs.) 3877.00 Through Rate
13.95
54068
3877
HSR Item 9.10.1-Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 1. With residual type petroleum bitumen of grade VG -10
HSR Rate(Rs.) 93.00 Through Rate
330.92
30775
93
HSR Item 9.11.1-10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: 1. With common burnt clay non-modular brick tile of class designation 10
HSR Rate(Rs.) 488.00 Through Rate
330.92
161489
488
HSR Item 9.17.1-Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1. In 75x75 mm deep chase
HSR Rate(Rs.) 112.00 Through Rate
102.64
11495
112
HSR Item 9.31-Providing and fixing Hi, Rib profiled sheets 0.60mm TT (Total Thickness) (only ± 0.2mm tolerance allowed) Hi Tensile galvalume/Zincalume steel sheet of the
approved make having a hot dip metallic Zinc-Aluminium alloy (AZ-150) coating of minimum (150 gms/sqm) with 550 Mpa yield strength of approved blue colour (RAL-5012) the colour coating shall be as per IS 15965 of SMP or Super Durable Polyester Paint XRW fixed with hex head self-drilling screw sloping roof without curvature as per approved specification, drawing and design of the Corporation
HSR Rate(Rs.) 508.00 Through Rate
809.23
411089
508
HSR Item 9.34.1-Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm ( plus 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 1. Ridges plain (500 - 600mm)
HSR Rate(Rs.) 311.00 Through Rate
24.84
7725
311
NS Item -Supply and Filling of good quality local earth brought from the outside of the building of any irrespective lead and lift including
transporation i.e carriage loading and unloading and leveliing and compaction as per MORT and H specification in 15cm layer under
the floor of building and pavment/road and other places of site complete in all respect as per entire satisfaction of Engineer- In-Charge.
Note- All necessary approval, permissions and royalty if required will be borne by the agency/Contractor
18.89
5347
283
HSR Item 10.37.1-Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
1. 25 mm thick
HSR Rate(Rs.) 790.00 Through Rate
810.56
640343
790
HSR Item 10.7-Providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4
HSR Rate(Rs.) 216.00 Through Rate
576.92
124615
216
HSR Item 10.38-Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
HSR Rate(Rs.) 836.00 Through Rate
3.87
3233
836
HSR Item 10.50.1-Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
HSR Rate(Rs.) 2707.00 Through Rate
162.9
440964
2707
HSR Item 10.62-Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
HSR Rate(Rs.) 570.00 Through Rate
475.92
271272
570
HSR Item 10.63.2-Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm
HSR Rate(Rs.) 987.00 Through Rate
41.35
40808
987
HSR Item 10.67.2-Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @
3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. Size of Tile 600x600 mm HSR Rate(Rs.) 1004.00 Through Rate
50.44
50640
1004
HSR Item 10.73-Providing and fixing ceramic and Glazed tiles/ vitrified tiles/ of any size of approved make in floors / dados, laid in any pattern as specified over base of 3 mm thick adhesive of reputed brands as per IS specification 15477
-2004 using 5 Kg. adhesive per sqm area of tiles and jointed with white cement slurry mixed with pigment to match the shade of tiles excluding cost of tiles.
HSR Rate(Rs.) 1247.00 Through Rate
528.03
658448
1247
HSR Item 10.87.1-Providing and fixing P.V.C. strips, 40mm wide in floors. 1. 4 mm thick
HSR Rate(Rs.) 76.00 Through Rate
127.38
9680
76
HSR Item 10.104-Mirror polishing on marble work/Granite work/stone work whereever reqired to give high gloss finish complete.
HSR Rate(Rs.) 257.00 Through Rate
814.43
209308
257
HSR Item 10.107-Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. 0 0 0
HSR Rate(Rs.) 1605.00 Through Rate
36.6
58743
1605
HSR Item 11.5.3-12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)
HSR Rate(Rs.) 84.00 Through Rate
54.34
4564
84
HSR Item 11.68.3-Applying priming coat: 3. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
HSR Rate(Rs.) 19.00 Through Rate
393.32
7472
19
HSR Item 11.76-Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.
HSR Rate(Rs.) 37.00 Through Rate
161.29
5967
37
HSR Item 11.77-Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.
HSR Rate(Rs.) 19.00 Through Rate
161.29
3064
19
HSR Item 11.78-Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
HSR Rate(Rs.) 31.00 Through Rate
1174.75
36417
31
HSR Item 12.33.2-Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 2. With 12 mm mild steel U beading
HSR Rate(Rs.) 697.00 Through Rate
23.85
16622
697
HSR Item 12.37.1-Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
HSR Rate(Rs.) 1400.00 Through Rate
30.93
43304
1400
HSR Item 12.37.3-Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 3. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
HSR Rate(Rs.) 1316.00 Through Rate
36.27
47736
1316
HSR Item 12.89-Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
HSR Rate(Rs.) 701.00 Through Rate
6
4206
701
HSR Item 12.98.2-Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 2.
250x16 mm
HSR Rate(Rs.) 179.00 Through Rate
19
3401
179
HSR Item 12.99.3-Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 3. 200x10 mm HSR Rate(Rs.) 72.00 Through Rate
86
6192
72
HSR Item 12.99.4-Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 4. 150x10 mm HSR Rate(Rs.) 62.00 Through Rate
32
1984
62
HSR Item 12.102.1-Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 1. 125 mm HSR Rate(Rs.) 49.00 Through Rate
74
3626
49
HSR Item 12.103.2-Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 2. Twin rubber stopper
HSR Rate(Rs.) 52.00 Through Rate
25
1300
52
HSR Item 12.157.2.2-Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.2. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Powder coated aluminium (minimum thickness of powder coating 50 micron)
HSR Rate(Rs.) 403.00 Through Rate
246.06
99161
403
HSR Item 12.159.2-Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
HSR Rate(Rs.) 922.00 Through Rate
15.5
14294
922
HSR Item 13.3.1.1-Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 1.1. Profile B Fixing with adjustable lugs with split end tail to each jamb
HSR Rate(Rs.) 341.00 Through Rate
130.34
44445
341
HSR Item 13.3.2.1-Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 2.1. Profile C Fixing with adjustable lugs with split end tail to each jamb
HSR Rate(Rs.) 364.00 Through Rate
65.98
24016
364
HSR Item 13.3.3.1-Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 3.1. Profile E Fixing with adjustable lugs with split end tail to each jamb
HSR Rate(Rs.) 388.00 Through Rate
108.98
42282
388
HSR Item 13.10.1-Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 1. 4.0 mm thick glass panes
HSR Rate(Rs.) 539.00 Through Rate
33.9
18273
539
HSR Item 13.27-Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
HSR Rate(Rs.) 71.00 Through Rate
1110.69
78859
71
HSR Item 13.29.2-Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
HSR Rate(Rs.) 83.00 Through Rate
3209.33
266374
83
HSR Item 13.30.1-Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes
HSR Rate(Rs.) 105.00 Through Rate
7079.86
743385
105
HSR Item 13.31-Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
HSR Rate(Rs.) 66.00 Through Rate
200.03
13201
66
HSR Item 13.41-Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
HSR Rate(Rs.) 396.00 Through Rate
256.64
101629
396
HSR Item 17.72-Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORTH specifications
HSR Rate(Rs.) 4932.00 Through Rate
423.97
2091020
4932
HSR Item 30.16.1-Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 1. With cement mortar 1:4 (1 cement : 4 fine sand)
HSR Rate(Rs.) 176.00 Through Rate
934.94
164549
176
HSR Item 30.37.2-Finishing walls with Acrylic Smooth exterior paint of required shade : 2. Old work (One or more coat applied @ 0.90 litre/10 sqm).
HSR Rate(Rs.) 40.00 Through Rate
2678.1
107124
40
HSR Item 30.21-Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
HSR Rate(Rs.) 7.00 Through Rate
4122.8
28859
7
NS Item -Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron `Y` shaped placed 2.4m or 3.00 m apart and with 9 horizontal
R.B.T. reinforced barbed wire, stud tied with G.I. staples and
G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
64
16640
260
HSR Item 11.67.1-Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. Water thinnable cement primer
HSR Rate(Rs.) 22.00 Through Rate
3003.9
66085
22
HSR Item 11.60-Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
HSR Rate(Rs.) 59.00 Through Rate
5925.25
349589
59
HSR Item 7.21.1-Brick work with common burnt clay non- modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) HSR Rate(Rs.) 3693.00 Through Rate
4.01
14820
3693
HSR Item 7.28.2-Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. 2. Cement mortar 1:4 (1 cement :4 coarse sand)
HSR Rate(Rs.) 488.00 Through Rate
35.4
17273
488
HSR Item 7.58-Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required.
HSR Rate(Rs.) 75.00 Through Rate
73.76
5532
75
HSR Item 8.17-Providing and fixing manufactured jali of reinforced cement concrete consisting of cement , coarse sand and 10mm and down gauge bajri in ratio of 1:1:2 with 8mm dia tor steel. Outer frame of the jail will be 50mm wide and 25mm thick and inner frame of jali will be 25mm wide and 25mm thick with smooth finish as per design approved by the Engineer-in-Charge including fixing in position up to any height with cement sand mortar 1:4 complete in all respect.
HSR Rate(Rs.) 773.00 Through Rate
144.56
111742
773
HSR Item 8.27.2-Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 2. Granite work
HSR Rate(Rs.) 230.00 Through Rate
87.84
20203
230
HSR Item 9.18-Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
HSR Rate(Rs.) 147.00 Through Rate
6
882
147
HSR Item 10.15-Extra for using hardener at top surface (3.5Kg /sqm) of trimix M25 to finish surface complete in all respect
HSR Rate(Rs.) 171.00 Through Rate
1947.48
333019
171
HSR Item 12.87.2-Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 2. Double strip (horizontal type)
HSR Rate(Rs.) 23.00 Through Rate
4
92
23
HSR Item 13.37.3-Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 3. 80x0.90 mm M.S. laths with 0.90 mm thick top cover
HSR Rate(Rs.) 2030.00 Through Rate
22.3
45262
2030
HSR Item 13.39.1-Extra for providing mechanical device chain and crank operation for operating rolling shutters. 1.
Exceeding 10.00 sqm and up to 16.80 sqm in the area
HSR Rate(Rs.) 938.00 Through Rate
22.3
20914
938
HSR Item 13.38-Providing and fixing ball bearing for rolling shutters.
HSR Rate(Rs.) 322.00 Through Rate
4
1288
322
HSR Item 22.90-Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
HSR Rate(Rs.) 58.00 Through Rate
618.6
35878
58
HSR Item 6.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
HSR Rate(Rs.) 2442.00 Through Rate
228.07
556944
2442
HSR Item 30.22-Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
HSR Rate(Rs.) 10.00 Through Rate
1567.71
15677
10
HSR Item 11.64.1-Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. New work (two or more coats) over and including water thinnable priming coat with cement primer HSR Rate(Rs.) 45.00 Through Rate
3345.37
150541
45
HSR Item 11.71.1-Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work
HSR Rate(Rs.) 54.00 Through Rate
3003.9
162210
54
HSR Item 6.30.3-Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform
HSR Rate(Rs.) 208.00 Through Rate
50
10400
208
HSR Item 12.157.1.2-Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.2. For fixed portion
Powder coated aluminium (minimum thickness of powder coating 50 micron)
HSR Rate(Rs.) 350.00 Through Rate
300
105000
350
HSR Item 12.114-Providing and fixing of roller blinds on windows complete with material and labour complete with push up and down arrangement as per approved design / colour and Engineer-in-charge.
HSR Rate(Rs.) 2087.00 Through Rate
11.15
23265
2087
HSR Item 8.32-ALUMINIUM COMPOSITE PANELS
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis and design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material and labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item , as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places.
HSR Rate(Rs.) 2475.00 Through Rate
5.57
13795
2475
HSR Item 32.47.1-Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance = 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 and7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre and 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer- in-charge. 1. With 16 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6
HSR Rate(Rs.) 1119.00 Through Rate
47.38
53022
1119
HSR Item 12.146.1.1-Providing and fixing, in position concealed G.I. section for wall panelling using board of required thickness fixed on the `W` profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the `W` profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing and directions of engineer-in- charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 1.1. Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm.10mm thick HSR Rate(Rs.) 895.00 Through Rate
83.26
74517
895
HSR Item 17.69.2-Interlocking Concrete Block Pavement 2. Providing and Laying 80 mm thick ISI marked Interlocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect.
HSR Rate(Rs.) 655.00 Through Rate
232.26
152128
655
HSR Item 22.5-Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
HSR Rate(Rs.) 1104.00 Through Rate
10
11040
1104
HSR Item 22.1.4-Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
4. White vitreous chinaware Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
HSR Rate(Rs.) 1559.00 Through Rate
10
15590
1559
HSR Item 22.14.2.1-Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
2.1. Flexible pipe
32 mm dia
HSR Rate(Rs.) 57.00 Through Rate
10
570
57
HSR Item 22.22.1-Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. White vitreous chinaware Orissa pattern
W.C. pan of size 580x440 mm with integral type foot rests
HSR Rate(Rs.) 3493.00 Through Rate
3
10479
3493
HSR Item 22.23.1-Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 1. W.C. pan with ISI marked white solid plastic seat and lid
HSR Rate(Rs.) 3353.00 Through Rate
5
16765
3353
HSR Item 22.26.2-Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size
C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 2. Single half stall urinal with manually operated5 litre P.V.C. flushing cistern and manually operated stop cock/ angle valve
HSR Rate(Rs.) 4814.00 Through Rate
18
86652
4814
HSR Item 22.34-Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer- in-Charge.
HSR Rate(Rs.) 12200.00 Through Rate
1
12200
12200
HSR Item 22.38-Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
HSR Rate(Rs.) 241.00 Through Rate
9
2169
241
HSR Item 22.50.1.1.1-Providing and fixing partitions for different type of urinals. 1.1.1. Vitreous Chinaware Partition plate.
Small size 680mm x 330 mm White
HSR Rate(Rs.) 946.00 Through Rate
9
8514
946
HSR Item 22.86.4-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 4. 32 mm nominal outer dia Pipes
HSR Rate(Rs.) 429.00 Through Rate
50
21450
429
NS Item -Providing and fixing 25mm CPVC Union in CPVC pipe including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge
10
1620
162
NS Item -Providing and fixing 32mm CPVC Union in CPVC pipe including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge
10
1620
162
NS Item -Providing and fixing CPVC Ball valve of 25mm dia including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer in-charge.
10
2400
240
NS Item -Providing and fixing CPVC Ball valve of 32mm dia including cutting and Jointing the pipe with solution etc. complete in all respects as per direction of engineer incharge.
10
3860
386
HSR Item 22.101.1.1-Providing and fixing Unplasticised PVC connection pipe with brass unions : 1.1. 30 cm length
15 mm nominal bore
HSR Rate(Rs.) 44.00 Through Rate
27
1188
44
HSR Item 22.102.1-Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 1. 100 mm diameter
HSR Rate(Rs.) 121.00 Through Rate
5
605
121
HSR Item 22.103.1-Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 1. 15 mm nominal bore
HSR Rate(Rs.) 260.00 Through Rate
6
1560
260
HSR Item 22.104.1-Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 1. 15 mm nominal bore
HSR Rate(Rs.) 346.00 Through Rate
9
3114
346
HSR Item 22.106.1-Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1. 15 mm nominal bore HSR Rate(Rs.) 457.00 Through Rate
15
6855
457
HSR Item 22.107.1-Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore
HSR Rate(Rs.) 508.00 Through Rate
12
6096
508
HSR Item 22.108.1-Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore
HSR Rate(Rs.) 444.00 Through Rate
21
9324
444
HSR Item 22.181-Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
HSR Rate(Rs.) 7.00 Through Rate
7000
49000
7
HSR Item 22.209-Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
HSR Rate(Rs.) 813.00 Through Rate
10
8130
813
HSR Item 22.222.2.2-Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B
110mm o/d SWR UPVC pipe lines laid complete
HSR Rate(Rs.) 322.00 Through Rate
100
32200
322
HSR Item 22.222.2.3-Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.3. Single Socket Type B
90mm o/d SWR UPVC pipe lines laid complete
HSR Rate(Rs.) 273.00 Through Rate
60
16380
273
HSR Item 28.16-Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
(a) after surface preparation, first layer of slurry of cement @
0.488 kg/sqm mixed with water proofing cement compound @
0.253 kg/sqm
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately).
For the purpose of measurement the entire treated surface will be measured.
HSR Rate(Rs.) 325.00 Through Rate
822.5
267312
325
HSR Item 21.84.1-Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 1. Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with
C.C. topping
HSR Rate(Rs.) 3487.00 Through Rate
2
6974
3487
HSR Item 21.84.2-Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 2. Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with
C.C. topping)
HSR Rate(Rs.) 4977.00 Through Rate
2
9954
4977
HSR Item 21.93.1-Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including
setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge. 1.
Type:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening
HSR Rate(Rs.) 1155.00 Through Rate
5
5775
1155
HSR Item 22.33-Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
HSR Rate(Rs.) 10809.00 Through Rate
2
21618
10809
HSR Item 22.86.3-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes
HSR Rate(Rs.) 333.00 Through Rate
100
33300
333
HSR Item 22.87.3-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.
External work 3. 25 mm nominal outer dia Pipes
HSR Rate(Rs.) 201.00 Through Rate
100
20100
201
HSR Item 22.87.4-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.
External work 4. 32 mm nominal outer dia Pipes
HSR Rate(Rs.) 272.00 Through Rate
50
13600
272
HSR Item 22.109-Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
HSR Rate(Rs.) 49.00 Through Rate
40
1960
49
HSR Item 22.166.1.1-Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 1.1. 100x100 mm size P type
With common burnt clay non-modular bricks of class designation 7.5
HSR Rate(Rs.) 1457.00 Through Rate
4
5828
1457
HSR Item 30.91-Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia up to 300mm
HSR Rate(Rs.) 92.00 Through Rate
100
9200
92
HSR Item 24.5.2.3-MISCELLANEOUS ITEMS 2.3. S/E mark
double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid
0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.
DWC/HDPE pipe 63/50 mm outer dia/inner dia
HSR Rate(Rs.) 124.00 Through Rate
120
14880
124
HSR Item 23.7.6.2-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and
erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia.
HSR Rate(Rs.) 32.00 Through Rate
1250
40000
32
HSR Item 23.8.1.12-FITTING AND ACCESSORIES 1.12.
Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Bakelite angle/straight button holder large size.
HSR Rate(Rs.) 46.00 Through Rate
77
3542
46
HSR Item 23.23.9-MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required
HSR Rate(Rs.) 31.00 Through Rate
980
30380
31
HSR Item 23.20-Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required
HSR Rate(Rs.) 67.00 Through Rate
16
1072
67
HSR Item 23.22.1.9-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in- charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA HSR Rate(Rs.) 6130.00 Through Rate
12
73560
6130
HSR Item 23.22.1.10-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in- charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA HSR Rate(Rs.) 6695.00 Through Rate
2
13390
6695
HSR Item 23.22.1.12-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 1.12. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in- charge of the work. 4 pole MCCB 300 to 400 amp , 50 KA HSR Rate(Rs.) 20350.00 Through Rate
1
20350
20350
HSR Item 23.22.4.2-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 4.2. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing)
HSR Rate(Rs.) 1406.00 Through Rate
2
2812
1406
HSR Item 23.22.4.9-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 4.9. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 4 way ( 8 incoming and 3phase*4 outgoing)
HSR Rate(Rs.) 6088.00 Through Rate
4
24352
6088
HSR Item 23.22.4.11-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 4.11. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 8 way ( 8 incoming 3phase*8 outgoing) HSR Rate(Rs.) 8083.00 Through Rate
3
24249
8083
HSR Item 23.22.5.1-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole
HSR Rate(Rs.) 145.00 Through Rate
120
17400
145
HSR Item 23.22.5.4-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 5.4. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Double pole
HSR Rate(Rs.) 677.00 Through Rate
2
1354
677
HSR Item 23.22.5.8-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE
HSR Rate(Rs.) 1291.00 Through Rate
10
12910
1291
HSR Item 23.22.8.2-MCCB ,DISTRIBUTION BOARDS,
MCB`s, RCCB`s, CHANGE OVER etc. 8.2. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 100 amp 415 volts
HSR Rate(Rs.) 8071.00 Through Rate
1
8071
8071
HSR Item 23.24.4.4-MS STAND, BUS BAR CHAMBER AND
PANELS 4.4. Supply, installation, testing and commissioning of load bank with digital meter module cost of digital Amp. / volt meter with selector switch wiring ( but EXLUDING COST of incoming and outgoing MCCBs ) etc.suitable for operation of 240/415 volts A.C. Supply with both side cable allay, inter connection and fixing the same in existing MS pedestal/wall complete with all labour and material required for the same up to the entire satisfaction of Engineer-in-Charge of work. Load Bank 8 way 400 amp.
HSR Rate(Rs.) 56621.00 Through Rate
1
56621
56621
HSR Item 23.27.1-Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 1.
M.S. pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in 1:2:4 cement concrete block of size 750 mm x 450 mm x 200 mm above ground level , having a base of size 900 mm x 600 mm x 250 mm below ground level. 0 0
HSR Rate(Rs.) 4854.00 Through Rate
1
4854
4854
HSR Item 24.1.1-EARTHING AND LIGHTENING ARRESTOR
1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
HSR Rate(Rs.) 2721.00 Through Rate
5
13605
2721
HSR Item 24.1.2-EARTHING AND LIGHTENING ARRESTOR
2. Extra for using salt and char coal/coke for pipe earth electrode as required.
HSR Rate(Rs.) 652.00 Through Rate
5
3260
652
HSR Item 24.1.3-EARTHING AND LIGHTENING ARRESTOR
3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
HSR Rate(Rs.) 3368.00 Through Rate
2
6736
3368
HSR Item 24.1.5-EARTHING AND LIGHTENING ARRESTOR
5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.
HSR Rate(Rs.) 801.00 Through Rate
2
1602
801
HSR Item 24.1.6-EARTHING AND LIGHTENING ARRESTOR
6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.
HSR Rate(Rs.) 47.00 Through Rate
70
3290
47
HSR Item 20.71.2-Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge
2. 56" (1400mm)
HSR Rate(Rs.) 2361.00 Through Rate
30
70830
2361
HSR Item 24.1.7-EARTHING AND LIGHTENING ARRESTOR
7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.
HSR Rate(Rs.) 360.00 Through Rate
30
10800
360
HSR Item 20.72-Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge.
HSR Rate(Rs.) 1339.00 Through Rate
5
6695
1339
HSR Item 23.8.11.11-FITTING AND ACCESSORIES 11.11.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type
HSR Rate(Rs.) 304.00 Through Rate
15
4560
304
HSR Item 23.8.11.10-FITTING AND ACCESSORIES 11.10.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Blanking plate
HSR Rate(Rs.) 18.00 Through Rate
115
2070
18
HSR Item 23.8.11.7-FITTING AND ACCESSORIES 11.7.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt
HSR Rate(Rs.) 257.00 Through Rate
64
16448
257
HSR Item 23.8.11.5-FITTING AND ACCESSORIES 11.5.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 6 pin Socket HSR Rate(Rs.) 124.00 Through Rate
10
1240
124
HSR Item 23.8.11.4-FITTING AND ACCESSORIES 11.4.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp Socket
HSR Rate(Rs.) 82.00 Through Rate
40
3280
82
HSR Item 23.8.11.3-FITTING AND ACCESSORIES 11.3.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 1 way switch HSR Rate(Rs.) 82.00 Through Rate
10
820
82
HSR Item 23.8.11.1-FITTING AND ACCESSORIES 11.1.
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp 1 way switch HSR Rate(Rs.) 41.00 Through Rate
200
8200
41
HSR Item 23.8.10.6-FITTING AND ACCESSORIES 10.6.
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 12 Modules
HSR Rate(Rs.) 282.00 Through Rate
15
4230
282
HSR Item 23.8.10.5-FITTING AND ACCESSORIES 10.5.
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 8 Modules
HSR Rate(Rs.) 233.00 Through Rate
15
3495
233
HSR Item 23.8.10.4-FITTING AND ACCESSORIES 10.4.
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 6 Modules
HSR Rate(Rs.) 186.00 Through Rate
20
3720
186
HSR Item 23.8.10.2-FITTING AND ACCESSORIES 10.2.
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 Modules
HSR Rate(Rs.) 127.00 Through Rate
20
2540
127
HSR Item 23.5.5.2-COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL
POINTS 5.2. Wiring in existing conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch etc complete as required Group B
HSR Rate(Rs.) 691.00 Through Rate
72
49752
691
HSR Item 23.5.4.2-COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL
POINTS 4.2. Wiring in existing conduit and MS box for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch etc complete as required Group B
HSR Rate(Rs.) 402.00 Through Rate
70
28140
402
HSR Item 23.5.1.2-COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL
POINTS 1.2. Wiring only in 1.5 sqmm PVC insulated copper conductor cable for LIGHT/FAN/Call bell point in existing conduit pipe and MS boxes including cost of Bakelite cover for MS box, switch, wall socket, ceiling rose/connector etc. Group B
HSR Rate(Rs.) 292.00 Through Rate
300
87600
292
NS Item -Supply of 32/34/36 watt 6000k LED Surface/recess Mount fitting, slim type, M.S body 2`x2` size suitable for operation on 230V 50Hz AC Supply Make-Havells or as per HPHC approved brand list WITHOUT GST
20
54600
2730
NS Item -Supply of 45 watt LED street Light suitable for operating on 220 V, 50Hz supply complete with making necessary connection. Make - Havells or as per HPHC approved brand list. WITHOUT GST
8
21760
2720
NS Item -Supply of 18/20 watt rating 4 feet long LED Tube light Batten suitable for operation on 230 volt, 50 Hz supply. Make:- Havells or as per HPHC approved brand list
93
19530
210
NS Item -S/E of 100 watt LED Flood light suitable for operation on 230V ,50Hz complete the job in all respect . Make as per HPHC approved brands
8
34680
4335
NS Item -Supply of LED 18 to 24 watt Square fitting ( 1`x 1`) size , surface / recess type. Make:as per HPHC approved brand lis
47
80840
1720
NS Item -S/E of MS Frame i/e nut Bolts and M.S Plate size 6`x9` 3mm thick for pillar fan......
15
18675
1245
NS Item -S/E of Aircirculator Fan 750mm Dominair Wall Fan....
5
37700
7540
NS Item -Supply and erection of 6 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable .Make:- as per HPHC approved Brand List ( Without GST)
50
2000
40
NS Item -Supply and erection of 10 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable .Make:- as per HPHC approved Brand List ( Without GST)
60
5520
92
NS Item -SITC of (65 inches) Crystal ismart 4K Ultra Smart LED TV (3840X2160 Pixels) resolution Android LED display with built in 2.4 Ghz Wifi, 1.1 Ghz Built in quad core processor, 1.5 GB DDR3 RAM, 8 GB Memory, built in double core mali 600 Mhz GPU, with HDR 10, Dolby Audio, Built in Wifi and Cromecast, HDMI CEC, HDMI ARC, Built-in Bluetooth Ver. 4, 20W BUILT IN SPEAKERS, hdmi 2.0 x2, AV X1, USB 2.0X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1,
1
57041
57041
NS Item -S/E of 50/60 watt Flood Light suitable for operating on 240V 50Hz supply complete in all respect. Make Wipro or as per HPHC Brand List
24
61656
2569
NS Item -S/E of 16 CH NVR complete in all respect , Make- DAHUA/HIKVISION/CP PLUS
1
10575
10575
NS Item -S/E OF FLEXIBLE PIPE
60
3360
56
NS Item -S/E OF BNC CONNECTOR
30
3390
113
NS Item -S/E OF SMPS 8CH CP PLUS/HIKVISION/DLINK
16
32848
2053
NS Item -S/E OF DC CONNECTOR FOR ALL CAMERA`S
32
3232
101
NS Item -S/E OF CAMERA CONNECTOR PVC BOX
16
1344
84
NS Item -S/E OF HDMI CABLE 10MT ADNET/TERABYTE/DLINK
3
3477
1159
NS Item -S/E OF USB CABLE 1.5 MT ADNET/TERABYTE/DLINK
2
742
371
NS Item -S/E OF MOUSE WIRELESS HP/DELL/LOGITECH
2
1642
821
NS Item -S/E OF SWITCH 8 PORT GIGA POE TENDA/CP PLUS/ HIKVISION
6
56700
9450
NS Item -S/E OF MICROTEK/LUMINOUS UPS LEGEND 650 POWER BACKUP
3
11814
3938
NS Item -S/E OF WIRELESS DEVICE P2P DEVICE TENDA/DLINK
5
75940
15188
NS Item -S/E of bullet or dome IP 2MP or above night vision coloured camera CP PLUS/DAHUA/HIKVISION
10
50060
5006
NS Item -S/E OF NETWORKING RACK 4 U
3
8775
2925
NS Item -S/E OF HARDDISK 4TB WD/ DAICHI
1
11138
11138
NS Item -SITC of fully stainless steel body 150 ltr cooling and 150 ltr storage capacity water cooler with 2 no taps,locking arrangemeny with 4 KVA 170/270 v rating copper wound stablizer ( stablizer Make:- V-Guard
,microtek,luminious,voltas) complete in all respect. Make - as per HPHC approved brand list
2
104060
52030
NS Item -SITC of Commercial RO Capacity 50 LPH Complete with making necessary connection in all respect. Make - as per HPHC brand list..WITHOUT GST
2
82438
41219.07
NS Item -S/E of Aircirculator Fan 650mm Dominair Wall Fan....
6
38376
6396
NS Item -SITC of 2300 VA sinewave Inverter suitable for operation on single phase 230 volts, 50 HZ, AC supply with 2 nos 150/180 AH 12 V rating DC supply Tubular batteries having warranty of 2 years i/c cost of trolly for batteries complete with all labour and petty material required to complete the job. Make microtek or as per HPHC Approved Brand list
1
32458
32458.68
NS Item -S/E of Wall Fan 16` Sweep ( 400mm)oscilating pipe light duty complete with built-in regulater, blade, jali etc.
.Make:- as per HPHC approved Brand List WITHOUT GST
10
22520
2252
NS Item -S/E of Post Top lantern 25 to 35 watt suitable for 220 V, 50 Hz supply. Make :- Wipro or as per HPHC Brand List
2
10264
5132
NS Item -SITC of 1.5 Ton inverter type, 5 Star rating, Stablizer free operation Split A.C. complete with outdoor unit stand, 10 feet copper refrigerant and 10 feet drain pipe and complete with all necessary accessories. or as per HPHC approved Brand list. without GST
1
40625
40625
NS Item -Supply of PVC/XLPE insulated (Heavy Duty) Electrical cables for working voltage upto 1100 volt to IS: 1554 ( PART-1) with Aluminium conductor-ISI Marked power cable - Aluminium Conductor (16 sqmm 2 core armoured/unarmoured as per requirment). Make- Grandlay as per HPHC Brand list....
120
12240
102
NS Item -Supply and erection of 1.5 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable .Make:- as per HPHC approved Brand List without gst. ......
4500
65250
14.5
NS Item -S/E of 4 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable .Make:- as per HPHC approved Brand List ( Without GST......
1200
37500
31.25
NS Item -Supply of 15` Exhaust fan (375mm) 900 RPM, Heavy Duty with louver shutter make Crompton or equivalent as per HPHC Brand list WITHOUT GST
6
17376
2896
NS Item -S/E OF PTZ POLE STAND
3
9789
3263
NS Item -S/E OF PTZ CAMERA CP PLUS/ DAHUA/HIKVISION
4
141300
35325
NS Item -S/E AIR COOLER CAPACITY 70LTR MAKE VOLTAS OR BLUSTAR WITH STAND
5
53440
10688
NS Item -S/E post top lanter 25 watt suitable for 220 v, 50Hz supply. Make havells model RUBY MAXIPT25WLED757PSMTOPC
2
11590
5795
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power
Cable- Aluminium Conductor (25 sqmm 4 core armoured as per requirment). Make - Grandlay ( price list w.e.f from 24.01.2022) as per HPHC Brand List
135
24705
183
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power
Cable- Aluminium Conductor (50 sqmm 3.5 core armoured as per requirment). Make - Grandlay ( price list w.e.f from 24.01.2022) as per HPHC Brand List
60
17100
285
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power
Cable- Aluminium Conductor (35 sqmm 4 core armoured as per requirment). Make - Grandlay
200
48000
240
NS Item -Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power
Cable- Aluminium Conductor (120 sqmm 3.5 core armoured as per requirment). Make as per approved brand list of HPHC
60
35400
590
NS Item -S/E of 250 watt LED Flood light suitable for operation on 230V ,50Hz complete the job in all respect Make as per HPHC approved brands
11
137500
12500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements