Haryana Police Housing Corporation Tender

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings (HSR 23.22.2.) 23.22.2.1) MCCB up to 125 A FP

Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1 :2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineerin-charge of the work:-(HSR 23.27.) 23.27.2) M.S. pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level .

EARTHING AND LIGHTENING ARRESTOR. (HSR 24.1) 24.1.1) Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

24.1.2) Extra for using salt and char coal/coke for pipe earth electrode as required.

24.1.8) Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

24.1.13) Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.

Laying of underground cable in pipe /existing open/closed trench etc as (HSR 24.2.4) 24.2.4.1) 2.5 Sq mm to 10 sqmm 2 to 4 Core

24.2.4.2) 16 Sq mm to 35 sqmm 2 to 4 Core

Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections. (HSR 24.4.3)

Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB, end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge. (HSR 24.4.8) 24.4.8.4) 6 Metre Long pole with top dia 75 mm and bottom dia 150 mm with base plate of size 275 x 275 x 16 mm

Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) (HSR 24.4.4) 24.4.4.2) At Pole above 4.5 metres but up to the height of 7 metres

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.(HSR 24.5.2_) 24.5.2.3) DWC/HDPE pipe 63/50 mm outer dial inner dia

DISMANTLING (HSR24.6) 24.6.2.) Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required.

Supply of LT armoured cable of following 1100 Volt and complete with making necessary connection of cable on both ends including loading, unloading and carriage with all labour and petty material required to complete the job upto the entire satisfaction of Engineer-in-Chargre of the work. 1) LT armoured cable of size 25 sqmm 3.5 core

Supply of LT armoured cable of following 1100 Volt and complete with making necessary connection of cable on both ends including loading, unloading and carriage with all labour and petty material required to complete the job upto the entire satisfaction of Engineer-in-Chargre of the work. 1) LT armoured cable of size 10sqmm 2 core

Supply of 45 watt LED Street Light metal body 4500 lumens complete in all respect with making necessary