Gurugram University Tender

Providing and Placing in position Corner Table. Overall size of the table shall be 450 W mm x 450 D mm x 370 H mm. Top and Bottom panel shall be made of 36mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges shall be edge banded with matching 1mm thick veneer lipping. Side panel shall be made of 18mm Thick Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Side panels shall be fitted with aluminum trim. Skirting shall be made of 18mm Thick Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position High Back Chair. The seat shall be made up of 1.2 plus /- 0.1 cm thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-95.4cm and size of seat shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat and back which shall be moulded with density 45 plus /- 2 kg/m ³ and hardness load 16 plus /- 2 kgf as per IS: 7888 for 25% compression. The seat and back should be arrested together with spine made of 0.8 plus /- 0.05 cm thick HR steel and should be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made of 2.54 plus /- 0.03cm x 0.16 plus /- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made up of black integral skin polyurethane with 50-70 shore `A` hardness reinforced with M.S insert. The armrest top shall be made up of ABS and upholstered with foam and leather. The mechanism of the chair shall have following features : 360° revolving type, Knee Tilt system, Seat and back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 5-position locking with antishock back mechanism which should prevent the backrest from impacting the user when the lock is released, Static seat depth adjustment 5.0 plus /- 0.5cm with 5 position locking. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 plus /- 0.3 cm. The bellow should be single piece duly blow moulded in black polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 67.0 plus /- 0.5 cm pitch-centre-dia (77.0 plus /- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal below. Height of back from ground - min 128.0 to max 137.0 cms. Seat height - min 49.9cm to max 58.9 cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Visitors Chair. The seat shall be made up of 1.2 plus /- 0.1 cm thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be (W)-53cm x (H)-73cm and size of seat shall be (W)-54.6cm x (D)-49cm. High Resilience (HR) foam should be used in making seat and back which shall be moulded with density 45 plus /- 2 kg/m ³ and hardness load 16 plus /- 2 kgf as per IS: 7888 for 25% compression. The fixed type mechanism shaal be made with a 0.8 plus /-0.05cm thick HR steel spine welded to it and black powder coated. The Understructure is powder coated( DFT 40-60 microns ) in Silver metallic gray and is made up of M.S.E.R.W. Elliptical tube is of size 4.5 plus /- 0.03cm x 1.9 plus /- 0.02cm x 0.25 plus /- 0.025cm which is welded to M.S.E.R.W Tube of diameter 1.6 plus /- 0.02cm x 0.2 plus /- 0.016cm thick. Overall dimensions of Chair shall be- Width of Chair - 59cm, Depth of Chair - 68.5 cm as measured from pedestal below. Height of back from ground -89.5cm. Seat height - 46.5cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and placing in positon 3 Seater Sofa. Overall size of the sofa shall be 1820mm(L) x 920mm(D) x 890mm(H), Seat Height 470mm. The frame is made of combination of solid wood and moisture resistant plywood of thickness 12mm. The seat and back are made in slab stock super soft foam of 32kg/m3 density. The legs are made of PVC. The seat, arms and back are upholstred with pure leather at all touch points and synthetic leather at all non-touch points. All the dimensions will be as per the Original Manufacturer`s Specifications. The product should be complete as per approved sample and as per the direction of Engineer-In-charge.The frame is made of combination of solid wood and moisture resistant plywood of thickness 12mm. The seat and back are made in slab stock super soft foam of 32kg/m3 density. The legs are made of PVC. The seat, arms and back are upholstred with pure leather at all touch points and synthetic leather at all non-touch points. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and placing in positon 1 Seater Sofa. Overall size of the sofa shall be 920mm(L) x 920mm(D) x 890mm(H), Seat Height 470mm. The frame is made of combination of solid wood and moisture resistant plywood of thickness 12mm. The seat and back are made in slab stock super soft foam of 32kg/m3 density. The legs are made of PVC. The seat, arms and back are upholstred with pure leather at all touch points and synthetic leather at all non-touch points. All the dimensions will be as per the Original Manufacturer`s Specifications. The product should be complete as per approved sample and as per the direction of Engineer-In-charge.The frame is made of combination of solid wood and moisture resistant plywood of thickness 12mm. The seat and back are made in slab stock super soft foam of 32kg/m3 density. The legs are made of PVC. The seat, arms and back are upholstred with pure leather at all touch points and synthetic leather at all non-touch points. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Meeting Table. Overall size of the table shall be 1150 W mm x 1150 D mm x 740 H mm. The table top shall be made of 25 mm thick pre-laminated twin board, edge banded with matching 2 mm thick PWD edge banding. Plastic ABS access flap shall be provided for easy access to wires and cables. The Understructure shall be made of mixture of 18mm thick Pre-laminated twin board of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile shall be used for connecting panels together. Modesty Panel shall be made of 18mm Thick Pre-laminated twin board of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip shall be provided below work surface to enhance aesthetics. It shall be made of 0.8mm CRCA as per IS 513, and shall be epoxy polyester powder coated (DFT 40-60 microns). Wire Management shall be an array of panels made of 0.8mm CRCA MS IS:513, and shall be epoxy polyester powder coated (DFT 40-60 microns) shall be used for flow of wires and cables. Provision to mount 6 module switch plate shall be provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component shall be fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Meeting Chair. The seat shall be made up of 1.2 plus /- 0.1 cm thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-73cm and size of seat shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat and back which shall be moulded with density 45 plus /- 2 kg/m ³ and hardness load 16 plus /- 2 kgf as per IS: 7888 for 25% compression. The seat and back should be arrested together with spine made of 0.8 plus /- 0.05 cm thick HR steel and should be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made of 2.54 plus /- 0.03cm x 0.16 plus /- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made up of black integral skin polyurethane with 50-70 shore `A` hardness reinforced with M.S insert. The armrest top shall be made up of ABS and upholstered with foam and leather. The mechanism of the chair shall have following features : 360° revolving type without back tilt. The chair shall be provided with pneumatic height adjustment which shall have stroke of 12.0 plus /- 0.3 cm. The beloow should be made up of 3 piece telescopic type and injection moulded in black polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 67.0 plus /- 0.5 cm pitch-centre-dia (77.0 plus /- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal below. Height of back from ground - min 99.4 to max 111.4 cms. Seat height - min 43.4cm to max 55.4 cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Conference Table. Overall size of the Table shall be 10000 L mm x 2300 W mm x 740 H mm. The table top shall be made of 25 mm thick pre-laminated twin board, edge banded with matching 2 mm thick PWD edge banding. Plastic ABS access flap shall be provided for easy access to wires and cables. The Understructure shall be made of mixture of 18mm thick Pre-laminated twin board of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile shall be used for connecting panels together. Modesty Panel shall be made of 18mm Thick Pre-laminated twin board of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip shall be provided below work surface to enhance aesthetics. It shall be made of 0.8mm CRCA as per IS 513, and shall be epoxy polyester powder coated (DFT 40-60 microns). Wire Management shall be an array of panels made of 0.8mm CRCA MS IS:513, and shall be epoxy polyester powder coated (DFT 40-60 microns) shall be used for flow of wires and cables. Provision to mount 6 module switch plate shall be provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component shall be fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position High Back Chair for Conference Room. The seat shall be made up of 1.2 plus /-0.1 cm thk hot pressed plywood. The Back shall be made up of injection moulded glass filled nylon and upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area. SEAT SIZE shall be 47.0 cm. (W) x 51.5 cm (D) and BACK SIZE shall be 45.0 cm. ”(W) x 65.3 cm. (H). The HR polyurethane seat foam shall moulded with density 45 plus /-2 kg/m` and hardness 16 plus 2 kgf as per IS:7888 for 25% compression. The adjustable armrest shall be designed with the folIowing features: • Up-Down adjustment— 8 steps (8.0 plus 0.Scm range), • Height adjustable armrest structure which is Powder Coated and fitted with an armrest top, • Fixed Armrest Top is PU moulded over metal insert. The adjustable tilting mechanism shall be designed with the following features: • 360° revolving type, • Single point control, • Front-pivot for tilt with feet resting on ground ensuring more comfort, • Tilt tension adjustment, • 4-position locking with anti shock feature, • Seat/back tilting ratio of 1:2. The Neckrest assembly consist of polypropylène pad with moulded polyurethane foam and covered with polyester fabric. Neckrest shall be fixed to Back Assembly through Neckrest connector. Neckrest assembly shall have height adjustment of 4.2 plus 0 5 cm and rotation adjustment of overall 76 plus /- 2 degree. The complète neckrest assembly shall be retro fit to the main chair. The pneumatic height adjustment shall have an adjustment Stroke of 10.0 plus /-0.3 cm. The pedestal shall be injection moulded in black 33% glass-filled Nylons and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 66.1 plus /-0.5 cm. (76.1 plus /-1.0 cm. with castors). The Coat Hanger shall be made up of injection moulded glass filled nylon. The Coat hanger shall be retro fit and is fixed to the back assembly. The twin wheel castors shall be injection moulded in black Nylon. The product shall be BIFMA Level 2 certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Medium Back Chair. The seat shall be made up of 1.2 plus /-0.1 cm thk hot pressed plywood. The Back shall be made up of injection moulded glass filled nylon and upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area. SEAT SIZE shall be 47.0 cm. (W) x 51.5 cm (D) and BACK SIZE shall be 45.0 cm. ”(W) x 65.3 cm. (H). The HR polyurethane seat foam shall moulded with density 45 plus /-2 kg/m` and hardness 16 plus 2 kgf as per IS:7888 for 25% compression. The adjustable armrest shall be designed with the folIowing features: • Up-Down adjustment— 8 steps (8.0 plus 0.Scm range), • Height adjustable armrest structure which is Powder Coated and fitted with an armrest top, • Fixed Armrest Top is PU moulded over metal insert. The adjustable tilting mechanism shall be designed with the following features: • 360° revolving type, • Single point control, • Front-pivot for tilt with feet resting on ground ensuring more comfort, • Tilt tension adjustment, • 4-position locking with anti shock feature, • Seat/back tilting ratio of 1:2. The pneumatic height adjustment shall have an adjustment Stroke of 10.0 plus /-0.3 cm. The pedestal shall be injection moulded in black 33% glass-filled Nylons and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 66.1 plus /-0.5 cm. (76.1 plus /-1.0 cm. with castors). The Coat Hanger shall be made up of injection moulded glass filled nylon. The twin wheel castors shall be injection moulded in black Nylon. The product shall be BIFMA Level 2 certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position 8 Seater Sofa for VIP Lounge. Overall size of the sofa shall be 3570 L mm x 1110 W mm x 880 H mm. Back cushion shall be made using 100% polyester based conjugated fiber fill. Additional 25mm thk 32 Density Super soft lumbar support hidden behind fibers. Elastic bands incorporated in the back frame for sink-in back comfort. Super soft 100% polyester velvet fabric for smooth touch and feel in top part of back cushion. ‘S’ Spring suspension system built in the base frame for a bouncy feel. Seate foam shall be 28D – 75 mm thick, 32D – 50 mm thick super soft foam With super soft topper foam of 25 mm. Understructure shall be durable made using plywood, pine wood and MDF. Polypropylene with 20% Talc filled High impact durable legs. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position 8 Seater Sofa for VIP Lounge. Overall size of the sofa shall be 2440 L mm x 1110 W mm x 880 H mm. Back cushion shall be made using 100% polyester based conjugated fiber fill. Additional 25mm thk 32 Density Super soft lumbar support hidden behind fibers. Elastic bands incorporated in the back frame for sink-in back comfort. Super soft 100% polyester velvet fabric for smooth touch and feel in top part of back cushion. ‘S’ Spring suspension system built in the base frame for a bouncy feel. Seate foam shall be 28D – 75 mm thick, 32D – 50 mm thick super soft foam With super soft topper foam of 25 mm. Understructure shall be durable made using plywood, pine wood and MDF. Polypropylene with 20% Talc filled High impact durable legs. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Main Table for Vice Chancellor Office. Overall size of the table shall be Overall size of the table shall be 2400 W mm x 900 D mm x 740 H mm. Table top shall be made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges shall be edge banded with matching 1mm thick veneer lipping. Leather pad shall be made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad shall be fixed to main top panel. Top panel and drawer unit modesty panel shall be made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges shall be edge banded with matching lipping. Remaining construction shall be of 18mm Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer shall be made of 9mm thick particle board with leatherette on top surface. Drawer unit shall be provided with soft closing channels for smooth opening and closing. Drawer unit shall be secured with side central lock. Top panel and open storage unit modesty panel shall be made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges shall be edge banded with matching lipping. Remaining construction shall be of 18mm Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Modesty panel shall be made of 18mm Thick Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Modesty shall be fitted with aluminum trims. Understructure shall be made of 18mm Thick Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Door shall be fixed with soft closing hinges and handle is provided for ease of opening. Also lock shall be provided on side panel for security. Soft closing access flap shall be provided with power box contains 3 Universal Sockets, 2 USB power points, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6 connections. Overall size of Side Unit shall be 1200 W mm x 450 D mm x 610 H mm. Top panel shall be made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Sliding shutter shall be made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer. All thickness edges shall be edge banded with matching lipping. Door shall be provided with soft closing and anti slam mechanism. Handle shall be also provided for ease of opening. Storage shall be secured with lock. Understructure shall be made of 18mm Thick Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Drawer shall be made of 18mm Thick Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface. Drawers have soft closing channels for smooth opening and closing. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Center Table. Overall size shall be 1000mm(L) x 600mm(D) x 425mm(H). Understructure of the table which includes Legs, top wooden frame and bottom tie members are made out of first quality rubberwood of approved make without knots and defects on all faces. Legs are provided of size 75mm(W) x 35mm((D) at the top side and 35mm(W) x 20mm(D) at the bottom. Bottom tray is made of 1.2mm thick MS sheet. Metal brackets are used for assembly purpose. Top: 8mm thick toughened glass with crystal edge polish finish of approved make. Construction: Knock-down assembly.Wooden members are PU painted with hardness-2H. Metal components are powder coated. Bottom MS metal tray is having floral pattern laser-cut. Top glass is having sand blasted floral pattern on bottom surface 5. Hardware: Knock-down assembly with high quality standard hardware like screws, metal inserts, wooden dowel, plastic leg bush. Complete all as per the direction of Engineer-in-charge. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Corner Table. Overall size shall be 500mm(L) x 500mm(D) x 425mm(H). Understructure of the table which includes Legs, top wooden frame and bottom tie members are made out of first quality rubberwood of approved make without knots and defects on all faces. Legs are provided of size 75mm(W) x 35mm((D) at the top side and 35mm(W) x 20mm(D) at the bottom. Bottom tray is made of 1.2mm thick MS sheet. Metal brackets are used for assembly purpose. Top: 8mm thick toughened glass with crystal edge polish finish of approved make. Construction: Knock-down assembly.Wooden members are PU painted with hardness-2H. Metal components are powder coated. Bottom MS metal tray is having floral pattern laser-cut. Top glass is having sand blasted floral pattern on bottom surface 5. Hardware: Knock-down assembly with high quality standard hardware like screws, metal inserts, wooden dowel, plastic leg bush complete all as per the direction of Engineer-in-charge. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position High Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.4 ± 0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. The product shall be GreenGuard by UL and BIFMA Level 2 certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Visitors Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The tubular frame shall be cantilever type and made of Ø2.54±0.03 cm x 0.2±0.016 cm thick SS 202 tube. The back shall be connected to the frame through chrome plated high pressure die cast connector piece. The product shall be GreenGuard by UL and BIFMA Level 2 certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position 3 Seater Sofa. Overall size of 3 seare sofa shall be 1790 W mm x 835 D mm x 850 H mm with 550 Seat Height. The frame shall be made of rubber wood. The seat and back shall be made of soft foam and it shall be upholstered with PVC in dark brown shade. There shall be symmetrical sticthing lines on the upholstery. The material shall be provided strictly as per approved drawings and directions of the Engineer-in-Charge. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position 1 Seater Sofa. Overall size of 1 seater shall be 670 W mm x 835 D mm x 850 H mm with seat height of 550 mm. The frame shall be made of rubber wood. The seat and back shall be made of soft foam and it shall be upholstered with PVC in dark brown shade. There shall be symmetrical sticthing lines on the upholstery. The material shall be provided strictly as per approved drawings and directions of the Engineer-in-Charge. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Main Table for Dean Cabin. Overall size of the table shall be 2350 W x 1150 D x 750 H and ERU 1200 W x 600 D x 750 H. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. There shall be 2 Nos. of Drawer Units i.e., 1 Nos. under Main Table and 1 Nos. under ERU, where Drawer fronts shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing and anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position High Back Chair. Overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer and inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, and hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. The product shall be GreenGuard by UL and BIFMA Level 2 certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Visitors Chair. Overall size of 60.9 W m x 64.2 D cm x 98.2 H cm x 44.8 Seat Height cm. The seat is cushioned seat made of injection molded plastic outer and inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, and hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The tubular frame is cantilever type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202 tube. The back connected to frame through chrome plated high pressure die casted connector pipe. The product shall be GreenGuard by UL and BIFMA Level 2 certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position 3 seater Sofa. Upperstructure shall be a single shell 1.2 ±0.1cm. thick hot pressed plywood. Dia 4mm zig-zag type assembly is mounted in the understructure for support and additional cushioning purpose. The seat is made up of PU foam with density 32 plus /-2 Kg/m3 having an additional top layer of PU foam with density 28 plus /-2 Kg/m3, upholstered with fabric or leatherette. The back is made up of 28 plus /-2 Kg/m3 with additional top layer of PU foam with density 23 plus /-2 Kg/m3, upholstered with fabric or leatherette. The leg is a welded assembly made up of stainless steel (grade SS 202) tube and plate. Overall Dimensions of Chair shall be Seat Height - 45.0 cm, Height - 82.0cm, Width and Depth of Chair as measured from pedestal - Width-205.5 cm and Depth-92.0 cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position 1 Seater Sofa. Upperstructure shall be a single shell 1.2 ±0.1cm. thick hot pressed plywood. Dia 4mm zig-zag type assembly is mounted in the understructure for support and additional cushioning purpose. The seat is made up of PU foam with density 32 plus /-2 Kg/m3 having an additional top layer of PU foam with density 28 plus /-2 Kg/m3, upholstered with fabric or leatherette. The back is made up of 28 plus /-2 Kg/m3 with additional top layer of PU foam with density 23 plus /-2 Kg/m3, upholstered with fabric or leatherette. The leg is a welded assembly made up of stainless steel (grade SS 202) tube and plate. Overall Dimensions of Chair shall be Seat Height - 45.0 cm, Height - 82.0cm, Width and Depth of Chair as measured from pedestal - Width-86.0 cm and Depth-92.0 cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Center Table. The top shall be made of which shall be 12 plus /-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12 plus /-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Corner Table. The top shall be made of glass which shall be 12 plus /-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12 plus /-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Main Table for Registrar Cabin. Overall size of the table shall be 2100 W x 1050 D x 750 H and ERU 1200 W x 600 D x 750 H. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. There shall be 2 Nos. of Drawer Units i.e., 1 Nos. under Main Table and 1 Nos. under ERU, where Drawer fronts shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing and anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Display Unit. Overall size of the Display Unit shall be 1800mm(L) x 500mm(D) x 1100mm(H). The Back unit shall comprises bottom sliding storage unit and top hollow storage spcae which are covered with top panels. The top panel of the back unit shall be made up of 25mm thick MDF one side pre-laminated board confirming to IS:14587:1998 with 0.4 mm PVC membrane pressed on top. Sliding door unit shall be made of made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing and anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in posirion Table for Deputy Registrar Cabin. Overall size of the table shall be 1800 W x 950 D x 750 H and ERU 1200 W x 500 D x 750 H. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. There shall be 2 Nos. of Drawer Units i.e., 1 Nos. under Main Table and 1 Nos. under ERU, where Drawer fronts shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing and anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Display Unit. Overall size of the Display Unit shall be 1650mm(L) x 500mm(D) x 750mm(H). The Back unit shall comprises bottom sliding storage unit and top hollow storage spcae which are covered with top panels. The top panel of the back unit shall be made up of 25mm thick MDF one side pre-laminated board confirming to IS:14587:1998 with 0.4 mm PVC membrane pressed on top. Sliding door unit shall be made of made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Handles are provided for ease of opening. Storage is provided with lock for security. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position 3 Seater Waiting Sofa. The side frame assembly shall be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It shall be made of 0 3.81 ±0.03cm. x 0.2±0.016cm. thick cmx0.l6cm and black powder coated (DFT 40-60 microns). The ends shall be fitted with ABS moulded end caps. It shall be the connecting beam assy. which holds the two side frames to each other. 2 nos tie members shall be used to connect the side frames. The tie-member shall be of dia 3.81 ±0.03cm x 02±0.016cm. thick cm x 0.16cm and black powder coated (DFT 40-60 microns ). The seat/back assemblies shall be mounted on one of the tie-member which shall has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5±0.1cm. thk 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. The seat rest assembly shall be consists of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 plus /-2 Kg/cm3 with Hardness load=25±2kgf as per lS:7888 for 25% compression of the foam. The complete moulded seat rest assembly shall be covered with a replaceable fabric upholstery cover. The dimensions of seat shall be: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T). The backrest assembly shall be flexing type and consists of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 plus /- 2 Kg/cm3 with Hardness load 14± 2 kgf as per lS:7888 for 25% compression of the foam. The complete moulded backrest assembly shall be covered with a replaceable fabric upholstery cover. The size of the back shall be 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) The adj. glide shall be injection moulded in black Nylon and fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take care or unleveled floor surface. Overall Dimensions of Chair shall be Seat Height - 43.5 cm, Height - 78.5cm, Width and Depth of Chair as measured from pedestal - Width-164.0cm and Depth-70.0 cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position VC Staff Table. 1500 W mm x 1550 D mm x 750 H mm. Worktop shall be made of Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Side table shall be Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel shall be made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Cube legs shall be fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) shall be welded for fixing worktop. These shall be welded together by argo shield welding. This welded structure shall be coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert shall be fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members shall be made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These shall be coated with 50 micron epoxy polyester coating. Cross Members shall be assembled by friction fit PDC joinery and grub screws. There shall always two cross members for one table. Soft closing access flap shall be used. Provision for standard size of 8 module electrical shall be offered. Access flap shall be made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision). This shall be fixed with worktop along the depth at Access Flap position. Hinge Door Unit shall be made of 18mm Thick Pre-laminated twin board of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Door shall be fixed with slide on hinges and handle is provided for ease of opening. Drawer shall be provided with ebco metabox slide and lock for security. The product shall be Green Guard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Table for Incharge Room. Overall size of the table shall be 2100 W mm x 1600 D mm x 765 H mm. The main top shall be of Particle board (Melamine Finish) 1800 x 795 mm. The top shall be 25 mm thick plus 15 mm frame and 2 mm PVC lipping on top. Also there shall be 0.35 mm PVC lipping on frame. The Modesty panel shall be 1100 x 405 x 46 mm thick particle board (Melamine Finish) with 0.35 mm thick PVC lipping. The Drawer Front shall be of size 500 x 170 x 16 mm thick Particle board (Melamine Finish) with 0.35 mm thick PVC lipping. The KBPT shall be 578 W x 284 D x 16 mm with 0.35 mm Thick PVC lipping. The ERU shall have all panels of 16 mm thick Particle board (Melamine Finish). The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position High Back. The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 70.5 cm (H). The HR polyurethane foam shall be moulded with density =45 plus /-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height - min 99.5 to max 110.5cm, Width and Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Visitors Chair. The cushioned seat assembly shall be made of injection molded plastic inner and outer. Plastic inner shall be upholstered with foam laminate fabric and moulded high resiliance polyurethane foam of density 45 plus /-2 per cubic metre and hardness load of 16 plus /-2 Kgf. Seat size shall be 46 cm W x 48 cm D. Thecushioned back shall be made of PU foam with insitu molded MS ERW round tube of size 1.9 plus /-0.03 x 0.16 plus /-0.0128 cm. it shall be upholstered with foam laminate fabric. Back size shall be 46.6 cm W x 59.6 cm H. The powder coated tubular frame shall be cantilever type and shall be made of 2.54 plus /-0.03 x 0.2 plus /-0.016 cm thick MS ERW tube. The back shall be connected to the frame through powder coated high pressure die cast connector piece. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Desk based system that has been designed to give a richer work experience in modern offices. The system should cater to different work activities with well-equipped layouts and zones created by the system’s different elements Worktop: Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. Access flaps with soft closing technology shall be provided on the table tops to access the switch points on the tray. Pentagonal workstations of size 1500mm W1 x 1500mm W2 x 600mm D 90 deg with laminated glass screen on studs along width. Understructure: The slanted legs shall be connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA. Wire Management: It shall be a part of the understructure and can be in the form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management throughout the cluster formation. Wire riser leg or independent wire risers shall be provided as per the layout structure. Screen: This screen shall be made of block structure (3mm thk MDF board plus batten made of 12mm thk MDF board plus 3 mm thk MDF board) Honey comb block shall be used to fill in the void space. Groove of 3 mm shall be provided on the periphery. This groove shall be to accommodate the fabric pasted on either side to be tucked in and allow a PVC Flexible T-Mould to give a clean edge. The Fabric screens shall be upholstered with Hot-melt glue. Mobile Drawer : Mobile Drawer Unit having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consistes of 2Box and 1File Drawers. The Overall size of the Drawer Units is 450mm(W) X 435mm(D) X 646mm(H). Construction and Material of Drawer Unit : Welded Assembled of 0.8 thick CRCA for Body Shell, Drawer Front and tray, Front Side Stiffener, Rear Side Stiffener and Bottom, 1.2 thick CRCA Top Stiffener and Bottom stiffener. Drawer Fronts and Metal Front Straight Edge. All Drawers with Double extension precision ball slide shall be provided. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking:10 lever Cam Lock and Central Right Hand locking with actuator and lock channel mechanism. Top Panel : 0.8 Thick Metal Straight Edge Top. Castors : Swiveling non-lockable 4Nos Castors mounted below the body shell. The Total drawer unit is finished with Epoxy Polyester Powder coated to the thickness of 50 microns ( plus /-10). Recta - 1200 W mm x 600 D mm x 750 H mm

Providing and Placing in position Office Chair. The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall be moulded with density =45 plus /-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height - min89.5 to max 100.5cm, Width and Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. The product shall be of Godrej/ Haworth/ Steelcase make only.

Providing and Placing in position Compactors. The Construction shall be rigid knock down made out of 0.8 thick CRCA steel. Each configuration have following type of blocks – Single Static (SS), Single Last (SL),Twin Mobile(TM). Finish: Finish shall be Epoxy polyester powder coated thickness of 40 microns. Construction: Shelf construction shall be made from CRCA steel 0.8 mm. Uniformly distributed load capacity of 100 Kg. Undercarriage: Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick. Movement: The Movements shall be Push-Pull/Drive Type configuration. Locking: Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is placed at suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Fixed unit (SD) does not have the Handle. Each units shall have Locking Knob for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts and bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 15 for SD3. Label holder: It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. Rail Pair: It consists of ‘C’ section 2 mm thk HR sheet and Square 25.4mm X 2mm thk ERW tube – both connected by screws. Prior to the grouting of the guide channels with the help of raul plug and screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and 2400mm. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only. 2 Bay Single Static Drive type Unit of size -: 2400 W mm x 400 D mm x 1900 H mm

Providing and Placing in position Compactors. The Construction shall be rigid knock down made out of 0.8 thick CRCA steel. Each configuration have following type of blocks – Single Static (SS), Single Last (SL),Twin Mobile(TM). Finish: Finish shall be Epoxy polyester powder coated thickness of 40 microns. Construction: Shelf construction shall be made from CRCA steel 0.8 mm. Uniformly distributed load capacity of 100 Kg. Undercarriage: Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick. Movement: The Movements shall be Push-Pull/Drive Type configuration. Locking: Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is placed at suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Fixed unit (SD) does not have the Handle. Each units shall have Locking Knob for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts and bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 15 for SD3. Label holder: It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. Rail Pair: It consists of ‘C’ section 2 mm thk HR sheet and Square 25.4mm X 2mm thk ERW tube – both connected by screws. Prior to the grouting of the guide channels with the help of raul plug and screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and 2400mm. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only. 2 Bay Single Last Drive type Unit of size -: 2400 W mm x 400 D mm x 1900 H mm

Providing and Placing in position Compactors. The Construction shall be rigid knock down made out of 0.8 thick CRCA steel. Each configuration have following type of blocks – Single Static (SS), Single Last (SL),Twin Mobile(TM). Finish: Finish shall be Epoxy polyester powder coated thickness of 40 microns. Construction: Shelf construction shall be made from CRCA steel 0.8 mm. Uniformly distributed load capacity of 100 Kg. Undercarriage: Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick. Movement: The Movements shall be Push-Pull/Drive Type configuration. Locking: Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is placed at suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Fixed unit (SD) does not have the Handle. Each units shall have Locking Knob for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts and bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 15 for SD3. Label holder: It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. Rail Pair: It consists of ‘C’ section 2 mm thk HR sheet and Square 25.4mm X 2mm thk ERW tube – both connected by screws. Prior to the grouting of the guide channels with the help of raul plug and screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and 2400mm. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only. 2 Bay Twin Mobile Drive type Unit of size -: 2400 W mm x 800 D mm x 1900 H mm

Providing and Placing in position Compactors. The Construction shall be rigid knock down made out of 0.8 thick CRCA steel. Each configuration have following type of blocks – Single Static (SS), Single Last (SL),Twin Mobile(TM). Finish: Finish shall be Epoxy polyester powder coated thickness of 40 microns. Construction: Shelf construction shall be made from CRCA steel 0.8 mm. Uniformly distributed load capacity of 100 Kg. Undercarriage: Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick. Movement: The Movements shall be Push-Pull/Drive Type configuration. Locking: Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is placed at suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Fixed unit (SD) does not have the Handle. Each units shall have Locking Knob for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts and bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 15 for SD3. Label holder: It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. Rail Pair: It consists of ‘C’ section 2 mm thk HR sheet and Square 25.4mm X 2mm thk ERW tube – both connected by screws. Prior to the grouting of the guide channels with the help of raul plug and screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and 2400mm. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only. Rail Pair 2400 L mm

Providing and Placing in position Compactors. The Construction shall be rigid knock down made out of 0.8 thick CRCA steel. Each configuration have following type of blocks – Single Static (SS), Single Last (SL),Twin Mobile(TM). Finish: Finish shall be Epoxy polyester powder coated thickness of 40 microns. Construction: Shelf construction shall be made from CRCA steel 0.8 mm. Uniformly distributed load capacity of 100 Kg. Undercarriage: Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick. Movement: The Movements shall be Push-Pull/Drive Type configuration. Locking: Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is placed at suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Fixed unit (SD) does not have the Handle. Each units shall have Locking Knob for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts and bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 15 for SD3. Label holder: It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. Rail Pair: It consists of ‘C’ section 2 mm thk HR sheet and Square 25.4mm X 2mm thk ERW tube – both connected by screws. Prior to the grouting of the guide channels with the help of raul plug and screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and 2400mm. The product shall be GreenGuard by UL certified. The product shall be of Godrej/ Haworth/ Steelcase make only. Rail Pair 1600 L mm