Gurugram University Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 19,38,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HRY_92034_1Tender No
GU/VC-CE/2019/110Tender Authority
Gurugram University ViewPurchaser Address
-Website
http://https://haryana.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and fixing glass fibre reinforced concrete (GFRC) screen in approved size, pattern, design, thickness and color as approved. The Screen should be made with with 53 Grade with white Portland Cement manufactured by cement or equivalent, Akali Resistant Glass Fibres manufactured by 'OVC; or equivalent, Quatz, fine silica sand, super plastecizers, manufactured by 'BASF', MYK Schomborg' or Equivalent, U.V. resistant Synthetic inorganic Pigments should be used for pigmentation manufactured by 'Bayferrox; or Equivalent, the material casting should take place in sythetic rubber/FRP mould or equivalent. The fixing of screen should be dry fixing i.e. to be done with stainless steel (SS-304) 'L' shape clamps, dash fasterns and pins. Only ISI marked as approved by Engineer in charge will be used.
Technical Spefication of GFRC Jali
1. Thickness of sheet = 4 mm (+-0.5 mm)
2. Depth of Full Jali Design = 40 mm
3. Color = normally off white/as required.
4. Reinforcement section = with wooden strips on all edges.
5. Wooden block embedded = in all four conrers.
6. Design = As per Architect layout/pattern
7. Mixing (FR Resign, FR Gelcoat, Catalyst, glass fibre mat surface mat, pigment etc. (NS).
50
-
-
... More
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). --------- Red sand stone - 30mm thick gang saw cut stone
858
-
-
... More
White sand stone - 30mm thick gang saw cut stone
1132
-
-
... More
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1
cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer- in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).
660
-
-
... More
Providing and fixing GRC Dummycoloumns
550
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). ----------Second class teak wood
4.48
-
-
... More
Sal wood
0.83
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: ---------------- 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
163
-
-
... More
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
68
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
231
-
-
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): ---------- Rectangular or square (Rate only)
231
-
-
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
231
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. ----------1.0 mm thick
508
-
-
... More
Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. ------------ 50 mm long
400
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
400
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : -----------9.74.1 250x10 mm
100
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
100
-
-
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
100
-
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
59
-
-
... More
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge (Cost of SS ball bearing. hinges is excluded).
48
-
-
... More
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634- 1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately).
26
-
-
... More
Providing & fixing GreenlamSturdoVibrance Rage Toilet Cubicle (of following standard dimension which includes 600mm door size width) made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12mm thick solid compact laminate panels tested by Shriram Test House.Finish of the compact laminate should be Suede / *Raw Silk, which includs doors, pilasters & intermediate panels finished with approved texture/shade as per the detail drawings & as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97& EN:BS1D0standard.The compact laminates should have the density 1.35kg/cm3 and fulfilled the criteria of FSC and green guard gold certification and manufactured under EN438-2&3:2005 standard. 12mm thick compact board should be Moisture resistant, Impact resistant, termite resistant ,Scratch resistant ,Weather and climatic shock resistant. Finish of compact laminates should be suede finish which includes door, pilasters and intermediate panels finished with approved texture/shades as per IS2046 and fulfilled the criteria of fire retardant under BS-476/97 and EN:BS1D0 standard. This also includes providing and fixing in position necessary hardware made out of Gun Metal finish available in Rustic Brown & Champagne coloras per manufacturer’s specifications & Architects instructions like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset with Occupancy indicators, (4) Coat hooks with Door stopper (5) U- Channels, (6) Adjustable foot/pedestal, (7) Aluminum Powder Coated Top Rail,(8) Rubber noise deafening tape, (9) Screws & wall Plugs. The top fitting should consist of Aluminium Powder Coated top rail which will get fixed with Mid & End pilasters. All screws will of 304 Grade in stainless steel with satin finish. All pilasters are supported by stainless steel Bottom Cladding. The base of the stainless steel bottom cladding will be anchored to the floor with a clearance height upto 150mm. 1995mm Height x 1000mm Width x 1550mm Depth, which includes 600mm door size width
33
-
-
... More
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. --------- 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
327
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
1400
-
-
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. --- Two coats
6000
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm
68
-
-
... More
Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimium) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles with sill out grid (with continous black line in grid) of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
3246
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :. For fixed portion. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
1400
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
150
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places. Note:- 2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories. (1) Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr. (2) Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml. (3) Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml. (4) Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm. (5) Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test. Tests to be conducted on site. (6) Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
200
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.. With brass cover plate minimum 1.25 mm thickness
10
-
-
... More
Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections.. For fixed portion
1400
-
-
... More
For shutters of doors, windows & ventilators
150
-
-
... More
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.
311
-
-
... More
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600. Upto 20 mm depth and 20 mm width
612
-
-
... More
Supplying and fixing surface mounting LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy80lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory. i/c connection wire, testing etc. to complete the job. . 15 W , 180/200mm
570
-
-
... More
Supplying and fixing surface mounting LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy80lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory. i/c connection wire, testing etc. to complete the job. 7 W/8 W, 100/150mm
31
-
-
... More
Supplying fixing and testing of T- 5 lamp Batten type Tube fitting with epoxy white powder coated CRCA sheet steel complete with electronic ballast (HF), rotor holders, duly wired ( without tube rod ) fixing wall/ceiling on PVC clamp/round plate with necessary materials complete as required. T - 5 Lamp 1 X 28 watt
200
-
-
... More
Supplying, fixing and testing of approved make modular integral step / skirt LED bulk head light suitable for 3 module box and plate including fixing on wall as required, with necessary material complete
6
-
-
... More
Supplying, fixing & testing of approved make of T- 5 lamp channel luminaries with plastic extruded housing with in-built electronic control gear, decorative end caps, diffuser including necessary materials connection etc. complete as required (without lamp)
6
-
-
... More
Supplying, erection and testing of approved make electric 1200 mm Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/1979 with up to date ammendments.
136
-
-
... More
Providing and fixing circular/Hexagonal cast iron or M.S.sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by mean of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.
136
-
-
... More
Supplying, erection and testing of approved make Wall Mounting fan complete with Wall Bracket ,canopy, blades, speed Regulator etc .A.C 230-250 volts with connections and including raw bolt/Anchor hole fastener etc. complete finished of approved as required.. a) 400 mm sweep
36
-
-
... More
Supplying, fixing, testing & commissioning wall / floor mounted LT Panel primer coated with powder coated paint & provided with required gasket for dust / vermin proof with degree of protection IP42 suitable for 415V 3 phase, 50 Hz, 4 wire system fabricated out of CRCA sheet up to 2 mm thick (1.6 mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Meter, Volt Meter, selector switches, Frequency Meter, phase indicating lamps, Energy Meter complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs , ACB, panel mounted Changeover switch / SFUs, etc. as required but excluding cost of bus bar strips, Ampere Meter, Volt Meter, Selector switch as per approved design & specification (Panel- Normal Supply Main Lt Panel). Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification. . . ---- MCCB with Breaking Capacity 25 KA at 415 V ------------------(Panel- Normal Supply Main Lt Panel)
300
-
-
... More
Digital Ampere Meter with CTs with selector switch
1
-
-
... More
Digital Volt Meter with selector switch & HRC fuse
1
-
-
... More
Frequency Meter
1
-
-
... More
Copper Bus bar strips with PVC sleeves
30
-
-
... More
LED lamp indicator
3
-
-
... More
Supplying, fixing, testing & commissioning wall / floor mounted LT Panel primer coated with powder coated paint & provided with required gasket for dust / vermin proof with degree of protection IP42 suitable for 415V 3 phase, 50 Hz, 4 wire system fabricated out of CRCA sheet up to 2 mm thick (1.6 mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Meter, Volt Meter, selector switches, Frequency Meter, phase indicating lamps, Energy Meter complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs , ACB, panel mounted Changeover switch / SFUs, etc. as required but excluding cost of bus bar strips, Ampere Meter, Volt Meter, Selector switch as per approved design & specification ( Emergency Supply) MCCB with Breaking Capacity 25 KA at 415 V.
300
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification --Digital Ampere Meter with CTs with selector switch
1
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification --Digital Volt Meter with selector switch & HRC fuse
1
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification ----Frequency Meter
1
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification -----Copper Bus bar strips with PVC sleeves
20
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification ----LED lamp indicator
3
-
-
... More
Supplying, fixing, testing & commissioning wall / floor mounted LT Panel primer coated with powder coated paint & provided with required gasket for dust / vermin proof with degree of protection IP42 suitable for 415V 3 phase, 50 Hz, 4 wire system fabricated out of CRCA sheet up to 2 mm thick (1.6 mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Meter, Volt Meter, selector switches, Frequency Meter, phase indicating lamps, Energy Meter complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs , ACB, panel mounted Changeover switch / SFUs, etc. as required but excluding cost of bus bar strips, Ampere Meter, Volt Meter, Selector switch as per approved design & specification (Lift panel ) MCCB with Breaking Capacity 25 KA at 415 V
100
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification---- Digital Ampere Meter with CTs with selector switch
1
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification -----Digital Volt Meter with selector switch & HRC fuse
1
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification -----Frequency Meter
1
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification -----Copper Bus bar strips with PVC sleeves
10
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification -----LED lamp indicator
3
-
-
... More
Supplying, fixing, testing & commissioning wall / floor mounted LT Panel primer coated with powder coated paint & provided with required gasket for dust / vermin proof with degree of protection IP42 suitable for 415V 3 phase, 50 Hz, 4 wire system fabricated out of CRCA sheet up to 2 mm thick (1.6 mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Meter, Volt Meter, selector switches, Frequency Meter, phase indicating lamps, Energy Meter complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs , ACB, panel mounted Changeover switch / SFUs, etc. as required but excluding cost of bus bar strips, Ampere Meter, Volt Meter, Selector switch as per approved design & specification (UPS panel ) MCCB with Breaking Capacity 25 KA at 415 V
180
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification ---Digital Ampere Meter with CTs with selector switch
1
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification -----Digital Volt Meter with selector switch & HRC fuse
1
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification -----Frequency Meter
1
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification -----Copper Bus bar strips with PVC sleeves
20
-
-
... More
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification ------LED lamp indicator
3
-
-
... More
Supplying and fixing 11/0.4 KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure / poles.
10
-
-
... More
Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor-----3.5 x 300 sq.mm
1
-
-
... More
3.5 x 240 sq.mm
1
-
-
... More
3.5 x 185 sq.mm
80
-
-
... More
3.5 x 120 sq.mm
50
-
-
... More
3.5 x 70 sq.mm
10
-
-
... More
3.5 x 50 sq.mm
50
-
-
... More
4 x 16 sq.mm
200
-
-
... More
4 x 10 sq.mm
200
-
-
... More
Supplying and fixing heavy duty cable gland & ferrules as per IS for P.V.C. insulated armoured cable with brass washer, Rubber ring complete erected with cable and lead connection etc. as per specification complete.--------Gland Size 22mm suitable for cable 2,3,3½ & 4 x up to 6 Sq.mm
32
-
-
... More
Gland Size 22mm suitable for cable 2/3, 3½, 2/4 x 10 Sq.mm or 2x 16 Sq.mm
20
-
-
... More
Gland size 28mm for 3/4 x 16 Sq.mm
30
-
-
... More
Gland size 32mm for 2/3, 3½, 4 x 25 Sq.mm OR 2/3, 3½ x 35 Sq.mm OR 2/3 x 50 Sq.mm.
30
-
-
... More
Gland size 38mm 3½ x 70 Sq.mm, 3x95 Sq.mm
2
-
-
... More
Gland Size 50 mm 3½ x 150 Sq.mm, 3 x 185 Sq.mm
2
-
-
... More
Gland Size 57mm 3 x 225 Sq.mm, 3 ½ x 185 Sq.mm
8
-
-
... More
Gland Size 70mm 3 x 240 Sq.mm, 3½ x 300 Sq.mm
1
-
-
... More
Supplying and fixing ferrules as per IS - specification suitable for following size of cable for circuit identification including connection as required complete--------300 sq.mm
1
-
-
... More
240 sq.mm
1
-
-
... More
185 sq.mm
8
-
-
... More
120 sq.mm
4
-
-
... More
70 sq.mm
4
-
-
... More
50 sq.mm
4
-
-
... More
16 sq.mm
30
-
-
... More
10 sq.mm
20
-
-
... More
6 sq.mm
32
-
-
... More
Supply and erection of aluminum lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work.-----6 to 16 sq.mm
200
-
-
... More
Laying of one number armoured / unarmoured power cable 1:1 kV grade of size not exceeding 25 Sq.mm in the existing RCC Hume/Stone ware/G.I. pipe / surface in existing trench as required.
200
-
-
... More
Laying of one number armoured / unarmoured power cable 1.1 kV grade of size exceeding 25 Sq.mm but not exceeding 400 Sq mm in the existing RCC Hume /Stone ware/G.I. Pipe/ surface in existing trench as required.
200
-
-
... More
Laying of one number armoured / unarmoured power cable 1.1 kV grade of size not exceeding 25 Sq.mm in th existing masonary open duct as required.
200
-
-
... More
Laying of one number armoured / unarmoured power cable 1.1kV grade of size exceeding 25Sq.mm but not exceeding 400 Sq.mm in the existing masonary open duct as required.
1
-
-
... More
Supply & Fixing Cable Route Marker round / square size 100mm, 5mm. Thick, G.I. Plate duly bolted/welded on 35mm x 35mm x 5mm angle iron 60cm long including excavation, grouting in cement concrete 1:2:4 (1cement and 2 coarse sand :4 graded stone aggregate 20mm nominal size) foundation of size 20cm x 20cm x 30cm duly embedded in ground 30cm depth or as required.
10
-
-
... More
Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends.. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron / hanging rod, for ceiling suspensions, clamps, anchor fastner, nuts, bolts, washers, not mor than 1.5 mtr. apart complete as per specification to complete the job. The tray shall be as follows :------150 x 50 mm x 1.6mm thick
100
-
-
... More
300 x 50 mm x 1.6mm thick
100
-
-
... More
450 x 50 mm x 2 mm thick
10
-
-
... More
Supplying and installing Double wall corrugated pipes (DWC) of HDPE ( IS 14930 Part II -marked ) for cable laid under ground with necessary material and at required depth upto 90cm. below road/ground surface, including excavation, back filling with excavated material, ramming and making the surface good. directed by the Engineer-in-Charge.--------110 sq.mm outer dia
20
-
-
... More
210 sq.mm outer dia
20
-
-
... More
Providing and fixing of lightning conductor finial made of 25mm dia 300mm long copper tube having single prong at top with 85 mm dia 3 mm thick copper base plate including holes complete as required.
1
-
-
... More
Providing and laying G.I. tape 38mm X 6mm thick for earth electrode directly in ground as required .
30
-
-
... More
Earthing with G.I. Earth plate 600mm X 600mm X 6mm thick including accessories and providing masonary encloser in cement mortor, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 Metre long etc. (but without charcoal or coke and salt ) complete as required.
2
-
-
... More
Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.----2 Pair (4 core)
6000
-
-
... More
Supply installation, testing commissioning of 0.5 mm size Solid annealed copper, Jelly Filled Telephone Cables, Polythene Insulated, Petroleum Jelly Filled with Poly-al laminate moisture barrier, Polythene Sheathed, Unarmoured Polythene Jacketed Telephone Cables as per DOT Specifications of following sizes------50 Pair telephone cable
3
-
-
... More
20 Pair telephone cable
200
-
-
... More
Supply, Installation testing and commissioning of telephone Tag block Krone connector with enclosure and lock complete as mentioned below :-------100 pair tag block
3
-
-
... More
20 pair tag block
1
-
-
... More
5 pair tag block
1
-
-
... More
Providing, laying and fixing 80 dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
30
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.--------Supply, fixing and testing of RJ 11 telephone jack modular (1 Module)
223
-
-
... More
Supply, fixing and testing of T.V. Outlet Modular (1Module)
3
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
90
-
-
... More
Supply, Installation testing and commissioning RJ - 45 Computer Jack cat 6 with shutter Modular (2Module)
2
-
-
... More
Suppling and drawing 4 pair shielded, 0.5 mm PVC.Insulated copper conductor un-armoured Cat-6 computer cable FR in existing surface / concealed ,steel / PVC. Conduit/Casing-NCapping as required.
60
-
-
... More
Supply, Installation testing and commissioning of patch cord as mentioned below :-----CAT 6 RJ45 Patch Cord F/UTP 3 Mtr.
399
-
-
... More
Supply, Installation testing and commissioning of 19" Modular Patch - 1 U Patch Panel 24, RJ 45 Cat-6 connector
3
-
-
... More
Supply, Installation testing and commissioning of wall
mounting rack, for computer switches complete as
mentioned below :--6U cabinet 371.30X600X500, wall mounting with power
supply and Fan etc.
1
-
-
... More
Supply, installation, testing and commissioning of 2 loop microprocessor based intelligent fire alarm and electronically addressable, modular ,loop capacity of 159 detectors. Fire alarm control panel with 5.7" touch screen LCD display,multipule axis levels ,10000 event history locks in non volatile memory (EEPROM).The panel should be modular microprosser based in nature the panel shell have 240 volt AC power supply, automatic battery charger, 240V, Ceiled lead acid mantanenance free batteries sufficient for 24 hiours normal working and then be capabale of operating the system for 30 mints during emergency condition .The panel shell be EN 54 /UL Certification
1
-
-
... More
Supply, installation, testing and commissioning of addressable - Automatic dual LED smoke detector With two integrated light -scattering smoke sensors using leds with different colors / wave lengths (blue/infrared) to avoid false alarm and should comply to test fire-1, inbuilt isolator ,automatic addressing, shell be UL/EN54 certified.
50
-
-
... More
Supply, installation, testing and commissioning of addressable -Optical thermal detector With inbuilt isolator ,automatic addressing, shell be UL/EN54 certified.
3
-
-
... More
Supply, installation, testing and commissioning of addressable -Optical detector With inbuilt isolator ,automatic addressing, shell be UL/EN54 certified.
3
-
-
... More
Manual Call point providing & fixing of manual calls point flush or surface mounting. Front protection class cover. Unbreakable glass ABS plastic body.
6
-
-
... More
Industrial hooter providing and fixing of industrial hooter Speaker horn type ABS body with working AC voltage 220V/24V Dc. Current consumption sound output 120db,Material MS sheet.
6
-
-
... More
Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid PVC Casing-N-Capping / conduit in surface or concealed as per specification. (a) 2 X 1.5 sq mm Per Mtr
1230
-
-
... More
Design, supply at site, installation, testing & commissioning of 3-phase, 415 volt, 1500 RPM, 50 HZ, Diesel generator set of 125 KVA at 0.8 pf lagging diesel engine alternator set mounted on common base frame in outdoor type acoustic enclosure , day tank capacity of 990 litres,m with AMF Panel,battery, batter charger, return fuel cooler, anti vibration mounting pads including residential silncer, engine alternator, pcc based auto start & synchronization set, safeties with acceccories as per specification complete as required. Diesel engine shall conform to IS:10000 and alternator shall be self excited complete with AVR to IS:4722.
1
-
-
... More
Supplying and fixing of undernoted 'B' class MS pipe for DG exhaust complete with bends, elbow, flanges etc. as required.------300 mm dia pipe
1
-
-
... More
250 mm dia pipe
1
-
-
... More
200 mm dia pipe
30
-
-
... More
Supply and fixing of 50mm thick compressed mineral wool insulation (Rock wool) for D.G. exhaust pipe with 22 gauge aluminium sheet cladding etc. as required for the under mentioned dia pipe.-------300 mm dia pipe
1
-
-
... More
250 mm dia pipe
1
-
-
... More
200 mm dia pipe
30
-
-
... More
Fabrication of supports for exhaust pipe, fuel pipe or for any other purpose out of M.S. structural steel including supplying and applying of enamel paint of approved shade after one coat of steel primer of reputed company.
20
-
-
... More
Supplying, Laying, terminating, testing, commissioning of folowing sizes of Copper Conductor PVC insulated, PVC sheathed armoured cable 1100 V grade. On surface the cable run shall be fixed on G.I. clamps etc of suitable size or as directed by the E-I-C complete in all respects. Supply and providing cable identification markers. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per specifications complete as required. ----------3 C x 6 sq.mm
50
-
-
... More
3 C x 4 sq.mm
50
-
-
... More
3 C x 2.5 sq.mm
50
-
-
... More
Making end termination with brass double compression gland including crimping of copper solderless lugs/ferrules for armoured power copper conductor cables of 1.1 KV grade of following sizes.---------3 C x 6 sq.mm (Copper)
4
-
-
... More
3 C x 4 sq.mm (Copper)
10
-
-
... More
3 C x 2.5 sq.mm (Copper)
4
-
-
... More
Providing, laying, jointing and testing of following sizes of pipes conforming to IS-1239 with all accessories like all fittings (upto 50mm dia threaded G.I.forged fittings and above 50 mm dia MS forged fittings with welded joints shall be used) fittings including tees, elbows, reducers, flanges, rubber gaskets, nuts bolts, washer. And fixing the pipe on floor / wall /ceiling with suitable size clamps, hangers, structural steel supports,core cutting wherever required & directed at site including cutting holes and chases in brick, R.C.C work and making good the same to original conditions complete in all respects.Arrows showing direction of flow to be marked(with paint of approved colour) on each pipeall vertical pipes inside shafts shall be provided with common angle iron supports as per draining. Providing two coats of synthetic enamel paint of approved shade over a coat of primer including painting of legends both direction arrow as per the approval of the architects / consultants. 'For Wet Riser System - M.S. `C' Heavy class pipe. -----------a) 50 mm dia ( 4.47mm thickness)
15
-
-
... More
b) 65 mm dia ( 4.47mm thickness)
10
-
-
... More
c) 80mm dia ( 4.85mm thickness)
25
-
-
... More
d)100 mm dia ( 5.40mm thickness)
15
-
-
... More
e)150 mm dia ( 5.40mm thickness)
130
-
-
... More
Providing & fixing of butterfly valve suitable for working pressure 10 Kg/Sqcm.& test pressure 20kg/sqcm with flanges, nut bolts & gaskets complete required.----------a) 50 mm dia
3
-
-
... More
b) 65 mm dia
2
-
-
... More
c) 80 mm dia
3
-
-
... More
d) 100 mm dia
3
-
-
... More
e) 150 mm dia
16
-
-
... More
Providing and fixing of C.I. dual plate wafer type check valve suitable for working pressure of 10 Kg/Sqcm & test pressure 20kg/sqcm with flanges, Nut, bolts & washers, painting etc. complete as required.--------a) 150 mm dia
2
-
-
... More
Providing and fixing C.I.`Y' strainer with bronze perforated sheet basket including rubber gasket, flanges, nuts, bolts and washers, complete as required.-----------b) 150 mm dia
3
-
-
... More
Providing & fixing gun metal single head fire hydrant valve with 80 mm N.B. flanged inlet, brass spindal, one no. 63 mm dia female instantaneous outlet type. G.M. coupling,blank cap, chain. Conforming to IS:5290. Including tapping from wet riser complete as required.
8
-
-
... More
Providing & fixing swinging type First Aid hose reel in red colour with 36 mts long and 20 mm dia dia heavy duty rubber water hose, 20 mm dia globe valve stop cock, terminating with G.M. coupling & nozzle of 5mm outlet with shut off valve confirming to IS 8090 - 1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required.
6
-
-
... More
Providing and Fixing Hose pipe, 63 mm dia and 15 mts long, duly reinforced, rubber lined suitable for brusting pressure not less than 22 Kg/Sqcm. conforming to IS 636-1988 type A with gun metal heavy duty instantaneous type coupling ( Pair male & female parts) conforming to IS 903. Complete as required.
16
-
-
... More
Providing and Fixing 63 mm dia instantaneous pattern branch short gunmetal pipe, 16 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required.
8
-
-
... More
Providing and fixing standard firemans axe with heavy rubber handle.
8
-
-
... More
Providing and fixing 4 mm thick glass door of size 1.2 m x 2.1x0.6 m fabricated from 1.6 mm MS sheet with centre opening for fire hose cabinet. Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour.
6
-
-
... More
Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer's specifications. --------a) CO2 gas nozzle type - 9 Litre capacity (IS:15683).
24
-
-
... More
b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683).
24
-
-
... More
c) ABC dry powder stored pressure type 6 kg capacity (IS:15683).
6
-
-
... More
Providing, fixing, testing & commissioning of MS air cushion tank on top of each riser fabricated from 8mm thick MS plate,250 mm in diameter and 1.2 m in height with dished ends fabricated from 10mm thick MS sheet,2coats of synthetic enamel paint over a coat of primer with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure guage with gun metal stop cock complete with all accessories as required.
2
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.-Circular tank.
5000
-
-
... More
VRV units : Supply,Installation,testing and commissioning of fully fatory assembled. Variable Refrigerant Volume / Flow type multi unit air condioning and heating system complete with indoor and outdoor units with individual controller for cooling & heating type operations. The compressor shall be high efficiency scroll or rotary type which shall be capable of inverter control i.e.changes its speed in accordance to the variation in cooling /heating loads. The quoted price to include all taxes,lifting,shifting,positioning at siteof all the equipment and fittings, remote controls,topping up of refrigerant R-410A or R-407C, MS Frame work for outdoor units installation,vibration isolators,wheather proof electrical panel with all such items required to fullfill the the intent and purpose as laid down in specifications and and drawings as required to make the whole system as required. (Approved makes:Daikin/LG/Samsung/Mitsubishi Electric ). Outdoor Units------ 40 HP
2
-
-
... More
36 HP
2
-
-
... More
26 HP
2
-
-
... More
20 HP
1
-
-
... More
VRV units : Supply,Installation,testing and commissioning of fully fatory assembled. Variable Refrigerant Volume / Flow type multi unit air condioning and heating system complete with indoor and outdoor units with individual controller for cooling & heating type operations. The compressor shall be high efficiency scroll or rotary type which shall be capable of inverter control i.e.changes its speed in accordance to the variation in cooling /heating loads. The quoted price to include all taxes,lifting,shifting,positioning at siteof all the equipment and fittings, remote controls,topping up of refrigerant R-410A or R-407C, MS Frame work for outdoor units installation,vibration isolators,wheather proof electrical panel with all such items required to fullfill the the intent and purpose as laid down in specifications and and drawings as required to make the whole system as required. (Approved makes:Daikin/LG/Samsung/Mitsubishi Electric ). Indoor units------4 way Cassette Type Units (1165 cfm/5.0HP)
5
-
-
... More
4 way Cassette Type Units (1130 cfm/4.0HP)
10
-
-
... More
4 way Cassette Type Units (742 cfm/3.2HP)
24
-
-
... More
4 way Cassette Type Units (671 cfm/2.5HP)
22
-
-
... More
4 way Cassette Type Units (565 cfm/2.0HP)
12
-
-
... More
4 way Cassette Type Units (459 cfm/1.25HP)
1
-
-
... More
Supply,Installation,testing and commissioning of corded remote controls as per drawing and specifications (Approved makes:Daikin/LG/Samsung/Mitsubishi Electric)
74
-
-
... More
Supply,Installation,testing and commissioning of centralised remote controlers as per drawing and specifications (Approved makes:Daikin/LG/Samsung/Mitsubishi Electric)
3
-
-
... More
Supply,installation,testing and commissioning of copper refrigerant piping for the above indoor and outdoor units copper piping shall be properly supported and it shall include the cost of all the fitting,insulation,UV coating and all required fittings,joints etc. as per drawings of the following sizes (the insulation shall be 13/19mm thick closed cell nitrile rubber tubular insulation and all internal and external pipes shall run on proper cable trays). (Approved makes:Rajco/Mandeo/Shreeshyam). --------41.9mm OD(insulation 19 mm thickness)
160
-
-
... More
34.9mm OD(insulation 19 mm thickness)
200
-
-
... More
28.6mm OD(insulation 19 mm thickness)
250
-
-
... More
22.2mm OD(insulation 13 mm thickness)
150
-
-
... More
19.1mm OD(insulation 13 mm thickness)
250
-
-
... More
15.9mm OD(insulation 13 mm thickness)
250
-
-
... More
12.7mm OD(insulation 13 mm thickness)
160
-
-
... More
9.5mm OD(insulation 13 mm thickness)
350
-
-
... More
6.4 mm OD(insulation 13 mm thickness)
50
-
-
... More
Supply,installation,testing and commissioning of 2core X 1.5 mm2 copper wire in PVC conduit as per specifications ( for transmission).
1800
-
-
... More
Supply,installation,testing and commissioning of 2core X 1.5 mm2 copper wire in PVC conduit as per specifications ( for remotes)
1450
-
-
... More
Supply,installation,testing and commissioning of double earthing GSS between panel & equipment
1
-
-
... More
H.R.V Unit : Supply,installation,testing and commissioning of Heat exchanger units (HRV) in double skin construction,constructed out of extruded Aluminium section frame with puf insulated panels,blowers,plate to plate type Aluminium heat exchanger and filters.The unit will have two separate passages one for supply of fresh air and the other for exhaust of cool air from the rooms after the revovery of energy. Efficiency of these heat exchangers shall be 60-65%.The plate to plate heat exchanger shall be rigid thermally bonded seamless Aluminium channels separated by extruded aluminium spacers of the following capacity.The unit shall be complete as per drawings and specifications. (Approved Makes: VTS/Systemair/Zeco/Vikram Hitech)-------1150 CFM
2
-
-
... More
1050 CFM
1
-
-
... More
1000 CFM
4
-
-
... More
Control Panel for HRV&Lift/Staircase Pressurisation Fan Section Units : Supply,installation,testing and commissioning of the following cubicle type openable front ,sheet steel wall mounted control panels sleeve type Al. bus bar including anchoring into the wall.These panels shall be complete in all respects as per the drawings and the specifications. The panel shall include the following accessories : Suitable MPCB , Terminal block for power distribution., Single Phase Preventor and push buttons., Phase indicating lights and indicating lights for ON/TRIP , status ,auxilliary contacts Ammeter and suitable size CT and Voltmetre, All starters shall have suitable potential free contacts. (Approved Makes: EAPL/Tricolite/Advance). The number of HRV Units Panel shall be as detailed below :----------16 amps TP MCB with 2 nos 1.0 HP DOL Starters
7
-
-
... More
Control Panel for HRV&Lift/Staircase Pressurisation Fan Section Units : Supply,installation,testing and commissioning of the following cubicle type openable front ,sheet steel wall mounted control panels sleeve type Al. bus bar including anchoring into the wall.These panels shall be complete in all respects as per the drawings and the specifications. The panel shall include the following accessories : Suitable MPCB , Terminal block for power distribution., Single Phase Preventor and push buttons., Phase indicating lights and indicating lights for ON/TRIP , status ,auxilliary contacts Ammeter and suitable size CT and Voltmetre, All starters shall have suitable potential free contacts. (Approved Makes: EAPL/Tricolite/Advance).:-----------The number of Lift/Staircase Pressurisation Fan Panel shall be as detailed below :16 amps TP MCB 5.0 HP DOL Starters
2
-
-
... More
16 amps TP MCB with 3.0 HP DOL Starters
2
-
-
... More
Propellar Type Fan. Supply,installation,testing and commissioning of Propeller type free discharge exhaust fans complete with motor , fan ,exhaust Louvers as per drawings and specifications. ----------300 mm dia
12
-
-
... More
250 mm dia
6
-
-
... More
Rectangular ductwork --- Supply,installation,balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets,elbows splitter,dampers,vanes,hangers,supports etc.as per approved drawings and specifications of following sheet thickness complete as required. --------24 Gauge (thickness 0.63mm sheet)
600
-
-
... More
Volume Flow Limiters: Supply,installation,testing and commissioning of VFLs (Volume flow limiters) complete with its body,dampers,regulator/setting arrangement for regulating the fresh air into rooms in round shape as per drawings and specifications--------4" dia - (approved makes:Trox/Titus)
80
-
-
... More
Duct Insulation: Supplying and fixing of following thickness duly laminated aluminium foil of mat finish close cell nitrile rubber (class O) insulation on ducts after applying two coats of cold setting adhesive (CPRX compound). The joints shall be with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.--------------19 mm thickness---(Approved Makes;Aeroflex/Armacell/K-Flex)
550
-
-
... More
Fressh Air Intake/Louvers/VCDs : Supply,installation,testing and commissioning of MS powder coated grilles with dampers,louvers for Fresh air intake.
2
-
-
... More
Supply,installation,testing and commissioning of GI construction Volume control Dampers complete with neoprene rubber, gaskets,nuts,bolts,linkages,flanges etc as per drawings and specifications
1
-
-
... More
Supply,installation,testing and commissioning of flexible duct connections constructed of fire resistance flexible double canvas sleeve as per the drawings and specifications.
3
-
-
... More
Supply,installation,testing and commissioning of MS powder coated Exhaust Louvers without dampers but with wire mesh jali for exhaust.
2
-
-
... More
Supply,installation,testing and commissioning of CPVC pipe with 6 mm nitrile rubber insulation specifications of below sizes--------------40 mm dia
100
-
-
... More
32 mm dia
250
-
-
... More
25 mm dia
300
-
-
... More
Supply,installation,testing and commissioning alised floor/wall mounted type made of 2 mm thick steel sheet duly painted complete as per the specifications and drawing and as detailed below : 1 no. 350 Amps TPN MCCB incomer with KWH meter, phase indicating lamps with control fuse & toggle switch, voltmeter and selector switch, ammeter with CTs and selector switch 1 set 350 Amps triple pole with neutral Al. Bus Bars duly sleeved 4 nos. of 63 Amps MCCB outgoing for VRV OD units with star delta starter 3 nos of 40 Amps MCCB outgoing for VRV OD units with star delta starter
1
-
-
... More
Supply,installation,testing and commissioning of PVC insulated sheathed 1.1 KV grade armoured undernoted sizes of Al/Cu conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables confirming to relevant IS codes and as per specifications in ground/trenches through pipe or on wall/racks cable trays including dressing and (Approved Make: KEI/Skytone/Polycab/Havells)---------- 3 C X 70 mm2 Aluminium Cable .
160
-
-
... More
3 C X 16 mm2 Aluminium Cable
140
-
-
... More
3 C X 10 mm2 Aluminium Cable
100
-
-
... More
3 C X 6 mm2 Copper Cable
200
-
-
... More
3 C X 4 mm2 Copper Cable
150
-
-
... More
Earthing : Supply,installation,testing and commissioning of following double earthing continuity conductor of Cu from Panels to respective equipment on surface or recess as per drawings and specifications. --------- 25 mm X 5 mm strip
75
-
-
... More
8 SWG wire
100
-
-
... More
Supplying, installation, testing and commissioning of 13 Passenger (886 Kg) lifts having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications and as under: Floor: G+2, Travel : 12 Meters (approx.) Stops and Opening :3 Stops & 3 Opening controller: AC Variable voltage and variable frequency Automatic rescue device complete with dry maintenance free batteries as required Operation: Microprocessor based single automatic push button / simplex selective collective / duplex selective collective/ with/ without attendant power: 415V 3phase 50 HZ, 4-wire system type of door: a. car: power operated center opening horizontal sliding, stainless steel scratch proof (moon rock finish) b. landing doors: stainless steel scratch proof (moon rock finish) A hand rail not less than 600mm long at 900 mm above floor level to be fixed adjacent to control panel in the lift car Voice announcement system in the car to announce the position of the elevator in the hoist-way as the car passes or stops at a floor served by the elevator Lift as per Above description complete as required.
2
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
23
-
-
... More
Providing and fixing wash basin with CI brackets,15mm brass pillar taps,32mm CP brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required.---------------White vitreous china wash basin size 550 mm x 400 mm with single 15mm CP brass pillar tap.
41
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. . Internal work exposed on wall ---------------15 mm nominal outer dia pipes
10
-
-
... More
20 mm nominal outer dia pipes
40
-
-
... More
25 mm nominal outer dia pipes
60
-
-
... More
32 mm nominal outer dia pipes
90
-
-
... More
40 mm nominal outer dia pipes
100
-
-
... More
50 mm nominal outer dia pipes
90
-
-
... More
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. Concealed work including cutting chases and making good the walls etc. -------------15 mm nominal outer dia pipes
5
-
-
... More
20 mm nominal outer dia pipes
280
-
-
... More
25 mm nominal outer dia pipes
70
-
-
... More
32 mm nominal outer dia pipes
40
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :---------------50 to 80 mm nominal bore
1
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)-----------25 mm nominal bore
7
-
-
... More
32 mm nominal bore
14
-
-
... More
40 mm nominal bore
10
-
-
... More
50 mm nominal bore
10
-
-
... More
Providing and fixing brass bib cock of approved quality.-15mm nominal bore.
55
-
-
... More
Painting G.I. Pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality-------32 mm dia. nominal bore
80
-
-
... More
40 mm dia. nominal bore
50
-
-
... More
50 mm dia. nominal bore
35
-
-
... More
Providing and fixing G.I. Pipes complete with G.I. Fittings including trenches and refilling etc.--------32 mm dia. nominal bore
80
-
-
... More
40 mm dia. nominal bore
50
-
-
... More
50 mm dia. nominal bore
35
-
-
... More
b)Shoe-110mm shoe
20
-
-
... More
Providing & fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1cement : 4 coarse sand) and making good the wall etc. complete.---------110mm dia
160
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighting not less than 440 grams.
20
-
-
... More
Providing & fixing single unequal junction degree with acess door, insertion rubber washer 3 mm thick, bolt and nuts complete.------100 x 100 x 75 mm------Sand cast iron S&S as per IS - 1729
14
-
-
... More
Providing & fixing single unequal plain junction of required degree.-----------100 x 100 x 75 mm----Sand cast iron S&S as per IS - 1729
20
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls , floors with cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) cement plastered on both sides with cement motor 1:3 ( 1 cement :3 coarse sand ) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : ---------For pipes 250 to 300 mm diameter
1
-
-
... More
Supply and fixing of PVC conduit ISI marked along with the accessories in concealed system etc. as required------ PVC conduit 32mm (HMS)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements