Gurugram University Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 87,54,000Document Cost
₹ 20,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_HRY_256777_1Bid Award Id
ViewTender No
GUG/CE/2023/33Tender Authority
Gurugram University ViewPurchaser Address
-Website
http://https://haryana.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Supply and fixing the door frame will be made out of Hardwood of maximum section 120 x 70mm and coated with VIPER Fire reatrdent Primer. (Main Hall Doors) Make: Navair, Kutty complete in all respects with the prior approval of Engineer-in-Charge. (N.S.ITEM)
290
-
1648
Supply and fixing SS Ball Bearing Hinges of size 100 x 75 x 3mm complet with SS Screws of BB1953 e ( 4 Nos per panel ) (Required For All Doors). Make: Becker F.S -MS. Navair, Kutty complete in all respects with the prior approval of Engineer-in-Charge. (N.S.ITEM)
300
-
369
Supply and fixing Panic Bar Double leaf panic exit devicesPEL 346 . (Required For Fire Staircase Location Doors Only). (Main Hall Doors) Make: Becker F.S. Navair, Kutty complete in all respects with the prior approval of Engineer-in-Charge. (N.S.ITEM)
100
-
17398
Supply and fixing PEL905 Becker F.S. Make Panic Trim For Operation From The Other Side Of The Panic Bar. (Required For Fire Staircase Location Doors Only).Make: Navair, Kutty complete in all respects with the prior approval of Engineer-in-Charge. (N.S.ITEM)
100
-
5602
Supply and fixing Mortise Dead Lock with 80mm cylinder body both side key DL7260 Becker F.S. Dead Lock Required For Shaft Door Location). Make: Navair, Kutty complete in all respects with the prior approval of Engineer-in-Charge. (N.S.ITEM)
50
-
4811
Supply and fixing SS D Type Pull Handle of size 300mm mm Long of PHD2230. Make: Navair, Kutty complete in all respects with the prior approval of Engineer-in-Charge. (N.S.ITEM)
50
-
2854
Supply and fixing Door closers of BLC-604 (Required For All Fire Doors Except Shaft Door). Make - Becker F.S or equivalent with the prior approval of engineer-in-charge. (N.S.ITEM)
50
-
2834
Supply and fixing Stainless Steel 304 grade 300mm Long Tower Bolt of with necessary screws as required Make - Becker F.S or equivalent with the prior approval of engineer-in-charge. (N.S.ITEM)
50
-
1252
Supply and fixing Anchor fastners of of maximum 120mm length. Make - HILTI, FISHER or equivalent with the prior approval of engineer-in-charge. (N.S.ITEM)
300
-
79
Supply and fixing IS-1212 S88 UL 1784-01 Smoke tested adhesive seal Make Smoke seal batwing type on all side of frame. Make - LORIENT/ Becker FS / PEMKO with the prior approval of engineer-in-charge. (N.S.ITEM)
290
-
174
Supply and fixing 5 MM thick clear Non wire 2 Hr Fire Vision glass 300x300mm. Make - Saint gobain or Equivalent with the prior approval of engineer-in-charge. (N.S.ITEM)
100
-
4020
Providing and Fixing SS ball bearing hinge (4 x 3 x 3mm) - Isuzul/Godrej/Hettich or equivalent make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
1080
-
382
Providing and Fixing Tower bolt 12" Aluminium - Godrej/ Ebco/ Hafele make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
410
-
474
Providing and Fixing SS finish door stopper - Model Godrej/ Ebco/ Hafele make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
410
-
198
Providing and Fixing SS back stopper - Model Godrej/ Ebco/ Hafele or equivalent make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
410
-
178
Providing and Fixing Pull handle 240 mm - Model Godrej/ Ebco/ Hafele or equivalent make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
410
-
1463
Providing and Fixing Ebco SS 304 friction stay-FRS-16 - Model of Godrej/ Ebco/ Hafele or equivalent make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
818
-
219
Providing and Fixing Ebco Euro window handle (brown) for Outward Opening Window - Model E-WH1 with HB of Godrej/ Ebco/ Hafele or equivalent make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
310
-
120
Providing and Fixing Ebco Euro window handle wid hook (brown) for Inward Opening Window - Model E-WH1 with HB of Godrej/ Ebco/ Hafele or equivalent make as as per prior approval of Engineer-in-Charge.. (N.S.ITEM)
818
-
153
Providing and Fixing Door Closer 60 kg Tto 90 kg of Ebco, Godrez make as per prior approval of Engineer-in-Charge.
420
-
2504
Providing and Fixing Mortise lock and latch with both side handle and keyed cylinder. 5991 NEH-16, 200mm of Ebco, Godrez make as per prior approval of Engineer-in-Charge.
380
-
2570
Providing and Fixing Patch fittings with 90 kg Floor spring of Ebco, Godrez make or equivalent make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
4
-
8106
Providing and Fixing H Handle SS 304 , 750 mm hole to hole of Ebco, Godrez make or equivalent make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
4
-
3361
Providing & Fixing ALDROP 16*200mm stainless steal complete in all respect of Godrej/ Ebco/ Hafele or equivalent make as per prior approval of Engineer-in-Charge. (N.S.ITEM)
420
-
1893
Providing and Fixing Sliding roller with necessary screws etc. complete as per direction of engineer in-charge (used in Aluminium windows) Make:(EBCO,Dorma, hafle) Complete in all respect with the prior approval of engineer. Incharge.
950
-
223
Providing and Fixing Sliding lock 1925(Manul) model no. -P-SWL-IM of Ebco make with necessary screws etc.(Used in aluminium windows) Make:Hindware,ozone,dorma Complete in all respect with the prior approval of engineer. Incharge.
470
-
413
Supply and Installation of Anutone Subtex Nubby, square edge, Glassfibre core fully encapsulated ceiling tile of size 595x595x15mm having volume density 120Kgs/m3, weight 1.8kg/m2 which is suspended by using 0.3mm thick Anutone Skelet TrelisT15 metal grid system.
-
-
-
Anutone Skelet TrelisT15 metal grid system of 600x600mm module includes Anutone Skelet WA15W30 wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Anutone Skelet MT15W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres.
-
-
-
Anutone Skelet CT15W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre- cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally Anutone Skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600x600mm module. Anutone Subtex Nubby square edge of size 595x595x15mm shall be placed into the grid size of 600x600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. (FOR CLASSROOMS, SEMINAR HALL & BOARD ROOM FALSE CEILING).Anutone or Equivalent make as per prior approval of Engineer-in-Charge.
1900
-
3460
Supply and Installation of Anutone Soak Cord, square edge, two color fabric wrapped vertically(choiced colours), pinewood fiber core panel of size 600x1200x15mm,with ribbed finish, volume density 400Kgs/m3, weight 6kg/m2 installed by using Anutone Strut framework system and Anutone Strut Z bars.
-
-
-
The Anutone Strut framework systems includes Anutone Strut CC25 Cross Channel having thickness 0.55mm, length 3600mm, knurled web 35, depth 20mm and equal flanges 15mm is fastened to wall positioned vertically in a regular manner at 600mm c/c. Anutone Strut Z bars having 40mm height, thickness 1mm is first fixed behind the panels by using suitable fasteners. Another length of Strut Z bar to be fastened perpendicular to Strut CC25 Cross Channel at spacing so as to match with that of Strut Z bar rear to panels. Soak cord, square edge panels are then slided on to Strut Z bar fixed on CC25 Cross Channel. (FOR CLASSROOMS, SEMINAR HALL & BOARD ROOM WALL PANELLING). .Anutone or Equivalent make as per prior approval of Engineer-in-Charge. Note: Thickness is given for bare Panels, 4mm for cord fabric.(fabric colour as per choice). The system is backlined with the acoustical infill Anutone SynthPF 10x25.
1700
-
9062
Providing and laying Plain Cement Concrete 1:1½:3 viz. M-20 of 150 mm average thickness for Trimix Concrete Flooring, using 25mm down aggregate and thoroughly washed sand, which is free from all foreign materials as approved by Architect/Engineer / Engineers & Poylpropelene Fibremesh of approved make ( 125 gm/ Cement Bag of 50 Kg ). It is to be laid in any thickness, shape or size, as per drawings and specifications.Including all the materials required for formwork, centering and scaffolding wherever required, at all depths and heights. Consolidating the same, including vibrating with needle of surface vibrator.
-
-
-
The curing must be done for a period of 7 days. It should be processed with Vacuum Dewatering System, including of surface vibrating and levelling the surface with screed vibrator, vacuum dewatering the surface, power trowelling the surface to make it smooth and finished, including groove cutting upto 20 mm deep and 5 mm wide construction/Expansion joints and making a panel of approx 3.0 mt. x 4.0 mt approx or as approved by Architect/Engineer.This joints is to be filled with polysulphide sealent as approved and directed. (FOR BASEMENT & RAMPS FLOORING) Complete in all respect with the prior approval of engineer. Incharge. (N.S.ITEM)
2200
-
1345.3
Providing and fixing solid laminated flush door shutters having uniform thickness of 37mm with smooth finish and moisture content 10 to 12% with water absorption of 2%, climate stable, warp and bend free as certified by IS-2202 with 1mm HPL conforming to IS - 2046 including , screws chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position).(Greenlam, century make, duro) Complete in all respect with the prior approval of engineer. Incharge. (N.S ITEM).
700
-
3981
Providing and laying smooth stone texture paint in colors shade and texture as per approval applied by a coat applied by a spray gun in the desired shade of approved make including sand papering the existing surface of putty, to give it a base for applying primer coat. It also includes scaffolding charges complete in all respect (FOR EXTERIOR FACADE) (N.S.ITEM). of Heritage Paints or Equivalent make as per prior approval of Engineer-in-Charge.
8000
-
965
Providing and fixing of flotex flocked textile floor covering of Nylon 6.6 mm face fiber with 100% Nylon and completely water proof resilient backing. The flooring should be Antistatic with thickness of 4.3mm and approximate weight of 1.8 Kg/ Sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers / Sq/mt(70million fiber / Sq.yd) in the width of 2 mtr. The floor covering should have Fire test EN-13501, Appearence retention Hexapod ISO 140-8, friction Slip Resistance Test EN14041 Class DS. sanitised anti-microbial treatment, with ten year limited warranty etc. complete in all respect to the entire satisfaction of engineer-in- charge. The work should be carried out by the authorized installer of the company in india Complete in all respect with the prior approval of engineer. Incharge.
350
-
4910
Supply & erection of GRC screens in approved designs & sizes & thickness manufactured containing alkali resistant Glass Fiber of make NEG, Japan and fixing by Dry Cladding using SS Cleats, SS Threading rods, Self Tapping Screws etc. Providing & fixing factory manufactured of G.R.C Jali made (Mahesh GRC, Unistone). It also includes scaffolding charges Complete in all respect with the prior approval of engineer. Incharge (FOR EXTERIOR FACADE). (N.S.ITEM)
255
-
5909
Supplying and fixing 10mm thick multiwall polycarbonate sheet roof cladding at all levels as per pattern for skylight roof cladding and specials with necessary aluminium extrusions with EPDM gasket, cutting, fabricating, erection at all levels with paintings all fixtures and fixing accessories such s self drilling, self taping fastener including cost of all materials, tools, tackles, equipment, preparation of shop drawings etc. all complete as per specifications and as directed Complete in all respect with the prior approval of engineer. Incharge (FOR RAMP ROOFING). (N.S.ITEM)
350
-
2712
Providing and fixing HPL sheet on Aluminum Frame 25mm x 50mm section with reverting same matching color and aluminum section black painted Complete in all respect with the prior approval of engineer. Incharge. (FOR EXTERIOR FACADE). (N.S.ITEM)
275
-
11353
Providing and Fixing of Panelling on wall with BWP grade Ply of 12mm on MS Frame work. 25mmx50mm MS tube with composite panelling lined with 1mm thick Laminate panelled. Surface shall be in perfect plumb with wall and ceiling.(Hall Wall Panelling) Make - Greenlam, Century , Archid Complete in all respect with the prior approval of engineer. Incharge.. (N.S ITEM)
550
-
4030
Extra for Proving V Groove & L groove in granite cladding including cutting of stone, Polishing to give high gloss finish Complete in all respect with the prior approval of engineer. Incharge.
2850
-
302
Providing 15mm thick Engineered Wooden Flooring with plank width of 185mm / 135mm and length of 1800mm / 2100mm and top layer up to 3mm Oak natural Veneer. Surface of Top layer is prefinished with several layer of UV hardened acrylic lacquer. Strictly Free from Formaldehyde and solvents. Flooring plank shall be interlocked using Plank Loc locking system in a glue less floating manner. Engineered wood planks shall be a composition of 3 layer of Pine wood with direction of each layer oriented at right angle to the adjacent layer of natural strain in Lacquer and Non-Beveled /Beveled in length and width (FOR SEMINAR HALL & BOARD ROOM)(N.S.ITEM) of Mikasa or Equivalent make Complete in all respect with the prior approval of engineer. Incharge.
215
-
1605
Design, Fabrication, Supply, Installation, Testing & Commissioning of Electric Traction Type fully automatic gearless and suitable for Machine room, Passenger Elevator having SS Enclosure with AC Variable Voltage & Variable Frequency drive unit suitable for operation on 415V +/- 10% , 3 Phase, 50 Hz. AC supply, power operated SS center bi-parting opening type car & landing doors (Landing Doors with minimum 2hours Fire rating), electro-magnetic brake system, car operating panel with braille push buttons, overload warning indicator, battery operated alarm bell, emergency light, intercom & SS Handrail to meet the requirement as per standard for physically challanged , infrared ray sensing door protection for full height, reverse phase relay on controller, fire man's switch at ground floor, digital car positions indicator in car & at all floors with up / down direction indications, light fixtures, ventilation fan, Rear wall in 12mm Thk. Toughened Clear Glass Panel, landing sill, main beam in shaft for machine, pit ladder, complete with all accessories serving different floors in the lift shaft alongwith Integrated controller in door frame, Predictive maintenance Enabled complete complying with relevant IS codes and requirement of local authorities, getting approval of concerned state/ central government authorities
-
-
-
including 12 months guarantee with free maintenance and replacements of equipment & spares. Automatic rescue device complete with dry maintenance free Ni-Cd batteries with charging circuit as required.
-
-
-
Automatic rescue device complete with dry maintenance free Ni-Cd batteries with charging circuit as required.
-
-
-
Elevator control and Interfacing with building fire alarm System
-
-
-
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator Complete in all respect with the prior approval of engineer Incharge.
-
-
-
Passenger Lift L1 & L2
-
-
-
i) No of persons - 10 Pax
-
-
-
ii) Capacity- 680 Kg
-
-
-
iii) Stops and Openings ( Same side)- 8 Nos.
-
-
-
iv) Aproximate Travel- 25 meters
-
-
-
v) Travel Speed- 1.5 mps
-
-
-
vi) Car & Hoistway Entrnce -800x2100
-
-
-
vii) Height of Car- 2239
-
-
-
viii) Type of Operation- Group Supervisory Control
-
-
-
ix) Layout- Both lifts adjacent to Each Other
-
-
-
PASSENGER ELEVATOR AS DESCRIBED ABOVE of SCHINDLER / KONE / OTIS make as per prior approval of Engineer-in-Charge.
4
-
3045000
PH Work:-
Providing and fixing in position Bib cock with wall flange (model CQT-23047) of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)
6
-
1220
Providing & fixing Hand shower (Health faucet) with 1.0m long easy flex tube in chrome finish & wall hook (model no. ALD-565) Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)
155
-
1243
Providing and fixing in position two way Bib cock for and hand shower (model CON-041KN) of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)
155
-
1335
Providing and fixing in position Angle Valve (model No.CON-059KN) Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)
710
-
989
Providing and fixing in position Central hole basin mixer without popup waste system with 450mm having long braided hoses (model (No Suggestions)) of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)
10
-
3250
Providing and fixing in position 15 mm i/d wall mounted sink cock with swinging casted round shape spout (Model No.CON-347KN) of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)
4
-
1889
Providing and fixing in position European Type Floor Mounted Water Closet (white) Suit of size(mm), (model (No . CNS-WHT-755SN + CNS-WHT-207 of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM), complete in all respects
155
-
10888
Providing and fixing in position Indian Type Orissa Pan with L bend and extension Water Closet with smart single flush Wall hung cistern with installation kit but withour drainage pipes (white) (model (No . ECS-WHT-451 LE + WHE-WHT-183T of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM).
10
-
2917
Providing & fixing under counter Basin (model No. CNS-WHT-705) of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM).
130
-
4548
Providing and fixing floor drain with jali (pp) as per I.S:14735:1999 marked of Supreme pipes or equivalent with prior approval of Engineerin charge. (N.S ITEM)
55
-
129
Providing and fixing in position Geyser of 25 liters capacity (Model-ELM-WHT-V025) of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM).
10
-
15883
Providing and fixing in position Bottle trap (model no.ALD-769L300x190) with internal partition 32mm size with 300mm & 190mm Long wall connections pipes & wall flange and waste coupling(model no.ALD-705L130) 32mm size full thread with 130mm Height of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM).
150
-
2261
Providing & fixing Pillar Cock long neck with 450mm long braided Hose (model No. CQT -23021B) of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM).
150
-
1496
Providing & fixing Wall Hung Basin (model No. CNS-WHT-801) with fixing accessories set size (550x410x195mm) of Make: Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM).
10
-
5032
Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. Supreme make or equivalent as per prior approval of Engineer-in-Charge. (NS Item)
-
-
-
FLOOR TRAP WITH TOP TILE & STAINER(100mm)
55
-
269
FLOOR TRAP WITH TOP TILE & STAINER(125mm)
265
-
318
DOOR TEE
45
-
305
DOOR BEND (TS)
65
-
246
BEND 87.5 °
85
-
210
DOOR CROSS TEE
35
-
413
COUPLER
25
-
165
DOOR CAP
40
-
137
VENT COWL
38
-
174
MULTI FLOOR TRAP
60
-
307
CLEANOUT
25
-
156
Providing and Fixing SWR Fittings (supreme make) for type B pipes 160mm dia including fixing jointing and testing etc. Supreme make or equivalent as per prior approval of Engineer-in-Charge. (NS Item)
-
-
-
DOOR TEE
155
-
631
COUPLER (RIB TYPE)
100
-
279
VENT COWL
60
-
273
DOOR ELBOW
150
-
601
CLEANOUT
355
-
275
Providing and Fixing dwc Fittings for double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 including fixing jointing and testing etc. for 150mm Pipe. Supreme make or equivalent as per prior approval of Engineer-in-Charge. (NS Item)
-
-
-
ROTO DWC BEND 90D
75
-
1280
ROTO DWC BEND 45D
85
-
755
ROTO EQUAL TEE
65
-
1250
ROTO CROSS TEE
105
-
1620
Providing and Fixing dwc Fittings for double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 including fixing jointing and testing etc. for 180mm Pipe. Supreme make or equivalent as per prior approval of Engineer-in-Charge. (NS Item)
-
-
-
ROTO DWC BEND 90D
45
-
2203
ROTO DWC BEND 45D
65
-
1727
ROTO EQUAL TEE
90
-
2399
Providing and fixing of 1 No. U-shaped rail with wall mounting of (Size: 600x100mm) at fixed height for handicap toilet complete as required. (Make-CERA, Model-2501) (Hindware, Cera, Parryware) (Used in Handicapped toilet) complete in all respect With the prior approval of engineer Incharge
7
-
7170
Providing and fixing of 1 No. Wall Mounted Grab Bar of (Size: 500mm) at fixed height for handicap toilet complete as required. (Make-CERA, Model-2504) (Hindware, Cera, Parryware) (Used in Handicapped toilet) Complete in all respect With the prior approval of engineer Incharge
7
-
5911
Providing and fixing of 1 No. Wall Mounted Grab Bar of (Size: 350mm) at fixed height for handicap toilet complete as required. (Make-CERA, Model-2505) (Hindware, Cera, Parryware) (Used in Handicapped toilet) complete in all respect With the prior approval of engineer Incharge.
7
-
3035
Providing and fixing Centralized R.O system with chillar plant of the capacity - 1100 litres / hr and storage of 15000 litres complete including fixing in position. (TERRACE) (MAKE:Aquagard,ionchange or equivalent ISI Mark) (Used at Terrace) With the prior approval of engineer Incharge
1
-
673636
Providing and Fixing automatic 'NO-Touch ' electric hand-driers complete with all accessories & fittings. (Make: Jaquar Model No. HDR-SAP-M99ACS) (Jaquar, Euronics & Kingston) (Used in Toilets) With the prior approval of engineer incharge)
28
-
21222
ELECTRICAL WORKS : LT PANEL: Supply, unloading, installation, testing and commissioning of the following cubical type panels made of 2.0 CRCA structure, base channe lSMC, doors & sheet metal partitions complete with, Moulded Case Circuit Breakers, meters, indicating lamps, current transformer, control MCB etc. Complete in all respects, insulated bus bars with heat shrinkable PVC sleeve, supported on FRP / SMC supports in suitable bus chambers, interconnection, small wiring, name plate, danger plate, earth bus etc. & comprising of compartments with hinged door for each feeder & its accessories, cable alley with hinged doors, bus chamber with bolted door etc. The panel being of dust & vermin proof construction with rubber gasket, attractively powder coated with Approved Paint shade. The panel shall be free standing type/ wall mounted type as per relavant drawing and comprising with foundation & Masonary works including ducting. Note:- Breaking Capacity of all MCCB's are Ics Service Breaking Capacity.
-
-
-
MCCB's upto 250A shall be with Adjustable thermal-magnetic and above 250A Microprocessor based adjustable release. All MCCB's shall be Front door operating handle, Phase Spreaders & Phase Barriers. TPN MCCB Shall mean 3Pole MCCB with Adequate size of separate neutral link. Metering CTs burden shall be 15VA & accuracy class 1.0. CTs shall be "CAST RESIN" type . All indication lights shall be LED type. All meters shall be "DIGITAL" type. Degree of Protection for Indoor panels shall be IP-55 with canopy and double for Outdoor Panels, cable entry from bottom only. Panel space heaters with control MCB & Thermostat, covered CFL lamp controlled by door switch for each panel bay. Gland plates shall be 2mm thick for LT. Panels upto 400A Incomer & 3 mm thick for LT. Panel with 630A & above incomer. Panel Manufacturer should have Type Test Certificates for Short Time withstand current test of 50KA for 1.0 Sec from CPRI Bhopal / Bangalore. "ON" Indicating lamp shall be provided for all 3 phase MCCB out going feeders unless otherwise specified. Control SP MCB's of 2 /4A Rating shall be provided for each metering circuit.
-
-
-
MAIN PANEL - Incoming: 1 No. 1000 Amp FP MDO Air Circuit Breaker (of 50KA Ics Value) with microprossor release for O/L, S/C & E/F protection. Bus bars - 1 Set of 1200-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Aluminium bus-bars with colour coded PVC heat shrinkable sleeves (Neutral to be equal to phase size). Metering & Indication: One set of R/Y/B phase indication Lamp & MCB. 1 No. Multi Function Meters (A/V/kW/kWh). ON/OFF/TRIP indication lamp for incomer. Outgoing: 4 Nos. 400 Amp TPN MCCB of 36 KA with overload, S/C protection. 2 Nos. 200 Amp TPN MCCB of 36 KA with overload, S/C protection. 1 Nos. 160 Amp TPN MCCB of 36 KA with overload, S/C protection. 8 Nos. 125 Amp TPN MCCB of 36 KA with overload, S/C protection. 6 Nos. 100 Amp TPN MCCB of 25 KA with overload, S/C protection. 1 Nos. 63 Amp TPN MCCB of 25 KA with overload, S/C protection. 2 Nos. 63 Amps. TPN MCB of 16 KA. 2 Nos. 40 Amps. TPN MCB of 16 KA. Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc .complete in all respect With the prior approval of engineer Incharge (NS ITEM)
1
-
1334079
Basement Panel: Incoming: 1 Set of 100 Amps. 415 Volts, FP MCCB of 25 KA with overload, O/V, O/C and earth fault protection. Bus bars: 1 Set of 150-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Aluminium bus-bars with colour coded PVC heat shrinkable sleeves (Neutral to be equal to phase size). Metering & Indication: One set of R/Y/B phase indication Lamp & MCB. 1 No. Multi Function Meters (A/V/kW/kWh). ON/OFF/TRIP indication lamp for incomer. Outgoing : 4 Nos. 63 Amps. TPN MCB of 16 KA. 4 Nos. 40 Amps. TPN MCB of 16 KA. Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc complete in all respect With the prior approval of engineer Incharge (NS ITEM)
1
-
160148
Ground Floor Panel (Typical For 1st, 2nd, 4th & 5th Floor): Incoming - 1 Set of 125 Amps. 415 Volts, FP MCCB of 25 KA with overload, O/V, O/C and earth fault protection. Bus bars: 1 Set of 200-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Aluminium bus-bars with colour coded PVC heat shrinkable sleeves (Neutral to be equal to phase size). Metering & Indication: One set of R/Y/B phase indication Lamp & MCB. 1 No. Multi Function Meters (A/V/kW/kWh).ON/OFF/TRIP indication lamp for incomer. Outgoing: 11 Nos. 63 Amps. TPN MCB of 16 KA. 4 Nos. 40 Amps. TPN MCB of 16 KA. Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc complete in all respect With the prior approval of engineer Incharge (NS ITEM)
5
-
220486
Third Floor Panel: Incoming - 1 Set of 125 Amps. 415 Volts, FP MCCB of 25 KA with overload, O/V, O/C and earth fault protection. Bus bars: 1 Set of 200-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Aluminium bus-bars with colour coded PVC heat shrinkable sleeves (Neutral to be equal to phase size). Metering & Indication: One set of R/Y/B phase indication Lamp & MCB. 1 No. Multi Function Meters (A/V/kW/kWh). ON/OFF/TRIP indication lamp for incomer. Outgoing: 9 Nos. 63 Amps. TPN MCB of 16 KA. 3 Nos. 40 Amps. TPN MCB of 16 KA. Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc complete in all respect With the prior approval of engineer Incharge (NS ITEM)
1
-
201699
Sixth Floor Panel: Incoming - 1 Set of 200 Amps. 415 Volts, FP MCCB of 25 KA with overload, O/V, O/C and earth fault protection. Bus bars: 1 Set of 200-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Aluminium bus-bars with colour coded PVC heat shrinkable sleeves (Neutral to be equal to phase size). Metering & Indication: One set of R/Y/B phase indication Lamp & MCB. 1 No. Multi Function Meters (A/V/kW/kWh). ON/OFF/TRIP indication lamp for incomer. Outgoing: 3 Nos. 100 Amps. TPN MCCB of 25 KA for Lift panels. 11 Nos. 63 Amps. TPN MCB of 16 KA. 4 Nos. 40 Amps. TPN MCB of 16 KA. Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc. complete in all respect With the prior approval of engineer Incharge (NS ITEM)
1
-
294536
UPS Input Panel : Incoming 1 Set of 160 Amps. 415 Volts, FP MCCB of 25 KA with overload, O/V, O/C and earth fault protection. Bus bars: 1 Set of 200-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Aluminium bus-bars with colour coded PVC heat shrinkable sleeves (Neutral to be equal to phase size). Metering & Indication: One set of R/Y/B phase indication Lamp & MCB. 1 No. Multi Function Meters (A/V/kW/kWh). ON/OFF/TRIP indication lamp for incomer. Outgoing: 4 Nos. 100 Amps. TPN MCCB of 25 KA. 1 Nos. 63 Amps. TPN MCCB of 25 KA. Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc complete in all respect With the prior approval of engineer Incharge (NS ITEM)
1
-
221994
UPS Output Panel: Incoming - 3 Set of 100 Amps. 415 Volts, FP MCCB of 25 KA with overload, O/V, O/C and earth fault protection for 3Nos. 40kVA UPS. Bus bars: 1 Set of 200-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Aluminium bus-bars with colour coded PVC heat shrinkable sleeves (Neutral to be equal to phase size). Metering & Indication: One set of R/Y/B phase indication Lamp & MCB. 1 No. Multi Function Meters (A/V/kW/kWh).ON/OFF/TRIP indication lamp for incomer. Outgoing- 9 Nos. 63 Amps. TPN MCB of 16 KA. 2 Nos. 40 Amps. TPN MCB of 16 KA. 3 Nos. 40 Amps. DP MCB of 16 KA. Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc complete in all respect With the prior approval of engineer Incharge (NS ITEM)
1
-
335743
Lift Machine Panel : Incoming - 1 No. 100 Amps 4 Pole on load auto change over system complete with 2 Nos. 100 Amp. 4P Contactor with voltage sensing realy interconnection etc. as required.1 Set of 100 Amps. 415 Volts, FP MCCB of 16 KA with overload, O/V, O/C and earth fault protection. Bus bars: 1 Set of 150-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Aluminium bus-bars with colour coded PVC heat shrinkable sleeves (Neutral to be equal to phase size). Metering & Indication: One set of R/Y/B phase indication Lamp & MCB. 1 No. Multi Function Meters (A/V/kW/kWh). ON/OFF/TRIP indication lamp for incomer. Outgoing- 3 Nos. 63 Amps. TPN RCCB of 30 mA. 2 Nos. 40 Amps. TPN MCB of 16 KA. 2 Nos. 40 Amps. DP MCB of 16 KA. Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc. complete in all respect With the prior approval of engineer Incharge (NS ITEM)
2
-
184558
LIGHT FIXTURES & FAN: Supply, Installation, Testing & Commissioning of luminaires basic channel, holder, LED driver (as per mentioned in item), starter, condenser, control gear box complete with decorative attachments, lamps etc.as per specifications and as per catalogue number giving below.
-
-
-
30 Watt 2'x2' Recessed Mounted LED Light Fixture. Liminaire should be extruded/PDC housing of Aluminium, THD less then 10%. Wipro Cat Ref. CRCO10R030HP57HEKS - 30W / 3600lm, Philips and Havells make with prior approval of Engineerin charge. (N.S ITEM)
754
-
5022
25 Watt LED Downlighter (Adjust 60 Deg) light fixture. Liminaire should be extruded/PDC housing of Aluminium, THD less then 10%. Wipro 25W Orbit - LM23O-671-XX-57-XW - 3125lm Philips and Havells make with prior approval of Engineerin charge. (NS ITEM)
11
-
8975
20 Watt LED Downlighter (Adjustable 60 Deg) light fixture. Liminaire should be extruded/PDC housing of Aluminium, THD less then 10%. Wipro- LD56-251-060-57-XX 2000 lm or ,Philips & Havells make with prior approval of Engineerin charge. (NS ITEM)
8
-
5121
15 Watt LED Recessed type LED downlighter. Liminaire should be extruded/PDC housing of Aluminium, THD less then 10%. LD06-171-XXX-57-XX - 1500lm Wipro, Philips & Havells make with prior approval of Engineerin charge. (NS ITEM)
1797
-
3832
15 Watt LED Surface Mounted LED downlighter. Liminaire should be extruded/PDC housing of Aluminium, THD less then 10%. Wipro LD06-171XXX-57SMG1 - 1500lm, Philips and Havells make with prior approval of Engineerin charge.
395
-
4107
9 Watt LED Bulk-Head light fixture. Liminaire should be extruded/PDC housing of Aluminium, THD less then 10%. Wipro - LW07-141-XXX-57-G1,Philips and Havells make with prior approval of Engineerin charge.
38
-
2242
36 Watt Surface mounted batten LED Light fixture. Liminaire should be extruded/PDC housing of Aluminium, THD less then 10% Wipro LL24-541-XXX-57-XX - (110lm/w), Philips and Havells make with prior approval of Engineerin charge.
194
-
2348
LED Strip Light (Waterproof) for cove lighting / decorative lighting, THD less then 25%. Wipro LLXX-XXX-XXX-50-XX -, Philips and Havells make with prior approval of Engineerin charge.
20
-
725
11 Watt LED Bollard Light fixture, Luminaire should be extruded/PDC housing of Aluminium, THD less then 25%. Wipro LB14-131-XXX-30-08 - (70 lm/w), Philips and Havells make with prior approval of Engineerin charge.
10
-
13129
15 Watt LED Surface Mounted LED downlighter (Outdoor Type, IP-66). Liminaire should be extruded / PDC housing of Aluminium, THD less then 10%. Wipro LD08-291-060-30 SM - (100 lm/w), Philips and Havells make with prior approval of Engineerin charge.
5
-
5478
FANS, EXHAUST FANS, CABIN FANS AND SOCKETS: Supply, Installation, Testing & Commissioning of Exhaust fans/ wall fan/Ceiling Fans of following sizes including making the holes to suit the size of the fan and making good the damages, including providing and fixing of louvers/shutters, connection, testing and commissioning. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
-
-
-
Ceiling Fan 1200 mm white color 2 Star , ISI Marked Specifications Havells - ES Plus , Usha, Orient, Crompton make with prior approval of Engineerin charge. (NS ITEM)
17
-
3936
Wall Fan 600 mm , Industrial Wall Air Circulator Fans. Crompton, Almonard, Usha make with prior approval of Engineerin charge. (NS ITEM)
41
-
13212
300 mm Sweep (900 RPM), Havey duty Exhaust fan with Louver suitable for operation on 1-Phase. Crompton, Almonard, Usha make with prior approval of Engineerin charge. (NS ITEM)
30
-
5550
Supplying Supply, Installation, Testing & Commissioning of following size Industrial socket outlet (outdoor type), IP-66, complete in all respect With the prior approval of engineer Incharge
-
-
-
32 Amp, 3-phase Industrial Socket (NS ITEM)
13
-
6046
40KVA UPS (For UPS POWER SOCKETS & EM. LIGHTING): Supply, unloading, installation, testing and commissioning of 40KVA IGBT based ON line UPS (in-put 3-Phase and out-put 3-Phase) with external extra Sealed maintenance free Batteries for 30 min. backup with the following with all required assecories & Masonary works. Operating Environment 0 - 35 Deg C, operating relative Humidity 20 - 80%, operating Elevation 0 to 99.9 meters, Storage Temperature- 10 - 40Deg C, storage Elevation 0 - 9000 meters, Regulatory Approvals CE,ISO 14001/ 9001. (Conf. N+1). Fuji/Eaton/Vertiv/TMEIC make with prior approval of Engineerin charge. (NS ITEM)
3
-
2035204
FIRE DETECTION SYSTEM: FIRE DETECTION & PUBLIC ADDRESS SYSTEM (UL, EN & ULC Listed and FM Approved) HONEYWELL- NOTIFIER / EATON / SIEMENS make with prior approval of Engineerin charge. (NS ITEM)
-
-
-
Supply, unloading, installation, testing and commissioning of Micro processor based. Intelligent Addressable 10 Loop Main Fire alarm panel, Central Processing Unit , with each loop capacity of 120 detector per loop with total of 240 detectors and devices with loop length up to 2 kmtr, network communication card, minimum 320 character graphics, LCD display with touch screen or other keypad and 1000 event history logs in the non volatile memory (EEPROM) power supply unit at 230+ 5 % V, 48 Hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout logs and facility to have integration with analog voice evacuation system( which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel should be compatible for integration with IBMS system with open protocol Bacnet/IP , complete as per specs and as required for following loops complete in all respect With the prior approval of engineer Incharge . ( NS ITEM)
1
-
894224
REPEATER PANEL: Supplying, of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
1
-
182406
DETECTORS: SITC of Intelligent Addressable Multi-Sensor (Optical Smoke) detector with base. The optical sensor element shall have multiple selectable sensitivity levels from 0.2% Obs/ft to 3.7% Obs/ft. The ROR detection element shall have selectable rate of rise setting of 8°C per minute & 11°C per minute (or close to this value not deviating more than 1°C). Fixed temp detection element shall have two selectable settings of 57°C and 68°C (or closer to this value not deviating by 1°C). Multis-sensor detector shall have a configuration mode that gives separate alarms for smoke detection and heat detection and shall indicate the cause of alarm (smoke or heat). Also the multi-sensor shall have combined configuration mode of smoke and heat detection that gives only one evaluated alarm from a multi-sensor detector in case of a fire event. The detector shall have operating temperature range from -9°C to 50°C and humidity tolerance range up to 95% RH, Non-Condensing. (Above False Ceiling) complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
529
-
7764
SITC of Intelligent Addressable Multi-Sensor (Optical Smoke) detector with base. The optical sensor element shall have multiple selectable sensitivity levels from 0.2% Obs/ft to 3.7% Obs/ft. The ROR detection element shall have selectable rate of rise setting of 8°C per minute & 11°C per minute (or close to this value not deviating more than 1°C). Fixed temp detection element shall have two selectable settings of 57°C and 68°C (or closer to this value not deviating by 1°C). Multis-sensor detector shall have a configuration mode that gives separate alarms for smoke detection and heat detection and shall indicate the cause of alarm (smoke or heat). Also the multi-sensor shall have combined configuration mode of smoke and heat detection that gives only one evaluated alarm from a multi-sensor detector in case of a fire event. The detector shall have operating temperature range from -9°C to 50°C and humidity tolerance range up to 95% RH, Non-Condensing. (Below False Ceiling) complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
545
-
4739
SITC of Intelligent Addressable Multi-Sensor (Optical Smoke+Heat) detector with base. The optical sensor element shall have multiple selectable sensitivity levels from 0.2% Obs/ft to 3.7% Obs/ft. The ROR detection element shall have selectable rate of rise setting of 8°C per minute & 11°C per minute (or close to this value not deviating more than 1°C). Fixed temp detection element shall have two selectable settings of 57°C and 68°C (or closer to this value not deviating by 1°C). Multis-sensor detector shall have a configuration mode that gives separate alarms for smoke detection and heat detection and shall indicate the cause of alarm (smoke or heat). Also the multi-sensor shall have combined configuration mode of smoke and heat detection that gives only one evaluated alarm from a multi-sensor detector in case of a fire event. The detector shall have operating temperature range from -9°C to 50°C and humidity tolerance range up to 95% RH, Non-Condensing complete in all respect With the prior approval of engineer Incharge
66
-
4739
RESPONSE INDICATORS: Supply of Response Indicators with Single LED. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
488
-
358
MANUAL CALL POINT: SITC of Intelligent Addressable Manual Pull Stations / Manual Call Points suitable for wall/column mounting. MCP shall have red coloured housing with molded, raised-letter operating instructions of contrast colour. The MCP shall latch mechanically upon operation and shall remain so until manually reset with its key by an authorized operator. The MCP shall have operating temperature range from 0°C to 50°C and humidity tolerance range up to 93% RH, Non-Condensing. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
32
-
4616
FAULT ISOLATOR: SITC of Intelligent Addressable, Supervised Short-Circuit Isolator. The Isolator Monitor Module shall have operating temperature range from 0°C to 49°C and a humidity tolerance of up to 90% RH, Non-Condensing. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
49
-
3031
Sounder: SITC of Addressable Notification Devices (Hooter with Strobe). Hooter with Strobe unit shall sit directly on addressable NAC (Notification Appliance Circuit) of FACP, fully supervised and powered from FACP. Hooter and Strobe elements of the combined unit shall have independent activation & deactivation criteria. Hooter shall stop at alarm "Acknowledge" and the Strobe shall stop at panel "Reset". The Hooter and Strobe element of Hooter cum Strobe combined unit shall be selected and triggered independently from FACP for performance check and maintenance. Hooter with Strobe unit shall have provision to be tested by a hand-held field diagnostic tool in "Silent Mode" and "Full Operation Sound Mode". The Strobe shall have multiple selectable candela settings configured and selected from the FACP. The hooter cum Strobe unit shall deliver output up to 94 db. at 3m from its installed location. The sounder/strobe unit shall display the voltage received by them at the control panel. The activation & deactivation requirement of Notification devices shall not be deviated. No external 3rd party power supply shall be permitted. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
32
-
7259
POWER SUPPLY: Supply, installation, testing & commissioning of 5A power supply which operates on 220 V 50 Hz power supply with 24 V DC supply with built in battery and battery charges for 2 hours backup. Power supply is for powering hooters/strobes complete in all respect With the prior approval of engineer Incharge . (NS ITEM)
1
-
5387
MODULES: SITC of Intelligent Addressable, Supervised Monitor Module monitoring Potential-free, Normally Open Dry Contact input. The Monitor Module shall have operating temperature range from 0°C to 70°C and a humidity tolerance of up to 93% RH, Non-Condensing. UL EN & ULC Listed and FM make with prior approval of Engineerin charge.complete in all respect With the prior approval of engineer Incharge (NS ITEM) ( NS ITEM)
24
-
4746
SITC of Intelligent Addressable Potential-free, Form-C, SPDT contact based control module to trigger 3rd party utilities like Pressurization fan activation, Special notification activation etc. The contact shall be rated for 2A@24Vdc (Resistive) & 1A@24Vdc (Inductive). The control module shall have operating temperature range from 0°C to 49°C and a humidity tolerance of up to 93% RH, Non-Condensing. UL EN & ULC Listed and FM with prior approval of Engineerin charge. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
32
-
4881
CABLE: Supply and laying of 2 core 1.5 Sq mm stranded plain annealed copper conductor glass mica taped , XLPE insulated , LSZH inner sheathed , galvanised steel wire armoured and over all LSZH out sheatheated fire survival cable generally as per BS:7846:2009 including connections etc as required . The cable will be fixed on surface with suitable saddles at an interval of not more than one meter. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
7650
-
211
FIRE EXIT SIGN;Supply of emergency fire exit sign boards, with both side display provision with suitable hanging arrangment complete in all respect as required.(NS ITEM)
34
-
6313
PA SYSTEM:
SITC of Microprocessor based Voice Alarm System Controller & Router suitable for 8 zones having built in 240 W amplifier , Freq. response 60 to 18000 Hz, distortion 1%, S/N Ratio 75 having memory capacity 16MB flash ROM, Max messages 255. Controller shall be EVAC Compliant, and as per EN-54-16, EN608-49 ( and recording the Massages given by user department in required format in minimum three languages and store in ROM as per software required format complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
10
-
384675
SITC of 19" rack mountable 480W Power Amplifier complete with LMT, control wires and other accessories. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
1
-
65148
SITC of the announcement console/call station with microphone suitable for 8 zones. The unit shall be suitable for expansion of at least 6 additional zones complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
1
-
61450
SITC of 6W Ceiling mounted speakers with built in 100/70v LMT, variable wattage tapping with required mounting accessories & hardware to mount in false /true ceiling. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
389
-
1851
Supply of 2 core 1.5 Sq mm stranded plain annealed copper conductor glass mica taped , XLPE insulated , LSZH inner sheathed , galvanised steel wire armoured and over all LSZH out sheatheated fire survival cable generally as per BS:7846:2009 including connections etc as required . The cable will be fixed on surface with suitable saddles at an interval of not more than one meter.complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
4350
-
211
SITC 9 U, wall mounted type standard alluminium Rack with front Acrylic door and lock , rear door with lock , wired power and signal Channel duly powder coated. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
1
-
223887
CCTV SYSTEM :
CCTV HONEYWELL / BOSCH / PELCO: Supply, installation, testing and commissioning of of IR indoor Dome type, 1/3" 4 MP ,progressive scan dual Streaming: H.265 smart codec, dual stream support, 2688 x 1520 resolution, Auto lens detection (2.7-13.5 mm) ,compatible with digital video recorder, PoE (802.3af) or 12 VDC support,UL/CE Listed,ONVIF conformant with IP 66 weather proof housing and 30 mtrs IR range. Honeywell or eqv. with prior approval of Engineerin charge complete in all respect With the prior approval of engineer Incharge .( NS ITEM)
48
-
16389
SITC of IR indoor bullet type, 1/3" 4 MP ,progressive scan dual Streaming: H.265 smart codec, dual stream support, 2688 x 1520 resolution, Auto lens detection (2.7-13.5 mm) ,compatible with digital video recorder, PoE (802.3af) or 12 VDC support,UL/CE Listed,ONVIF conformant with IP 66 weather proof housing and 50 mtrs IR range. Honeywell cat no. HBW4PER2 or eqv. with prior approval of Engineerin charge.complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
6
-
17733
SITC of 16 channel network recorder with 320 Mbps incoming bandwidth , Builtin POE switch,8 SATA ports up to 64 TB with RAIDS 0/1/5/6/10 configuration, Two Monitor HDMI Out . four USB ports. Operating temperature +0°C to +50°C , Operating humidity 90% non-condensing. Honeywell Cat No. HEN16304 or eqv. make with prior approval of Engineerin charge. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
1
-
66796
SITC of of 6TB Survillance Hard Disk of SEGATE/WB/SAMSUNG make with prior approval of Engineerin charge. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
1
-
26576
Supply , Installation , Testing and Commissioning of 16 port L2 web Managed switch having port density 16 Nos. of 10M/100M/1G RJ45 Port POE/POE+ ports , 2 Nos. of 1G/10G SFP Ports , 1X console port , Available POE power 370 W , 128 Gbps switching bandwidth , 16K MAC address support . DLINK/CISCO/HP make with prior approval of Engineerin charge. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
9
-
62819
Supply , Installation , Testing and commissioning of 18 U floor mount rack with fans , 2 cable managers , stationary shelf , 2 Nos of hardware pkts . DATA RACK / OMNITECH /RITTAL make with prior approval of Engineerin charge. complete in all respect With the prior approval of engineer Incharge (NS ITEM)
1
-
55282
Supplying and laying of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 4 Pair CAT6 Unshielded, Twisted Pair (U/UTP) Cable. Blue in colour conforming to the following standards like ANSI/TIA 568 C.2, EN50173, IEC 11801 2nd ED, 700Mhz etc. in Cat 6 U/UTP LCS2 cable with 23AWG . DLINK/LEGRAND/MOLEX make with prior approval of Engineerin charge. complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
1890
-
87
Supply , Installation , Testing and Commissioning of Full HD 32" LED Professional Display Panel. SONY/LG/SAMSUNG complete in all respect With the prior approval of engineer Incharge ( NS ITEM)
1
-
55396
FLOOR RACEWAY: Supply, laying of following sizes GI Raceway complete with all accessories including junction box with 3 mm thick cover plate, neoprene gasket in joints, cutting the floor and jamming the raceway with all necessary hardware (including civil works) as required. MEM/OBO/SLOTCO make with prior approval of Engineerin charge complete in all respect With the prior approval of engineer Incharge .( NS ITEM)
-
-
-
50 x 40 mm
596
-
904
100 x 40 mm
622
-
999
200 x 40 mm
278
-
1525
TELEPHONE SYSTEM: Supply installation and testing and commissioning of follwing size of Telephone distribution board in a M.S. box with hinged cover/ door complete with krone type tag block with double jumpering facility mounted on a bakelite sheet etc. including terminations of cable as required. ( NS ITEM) complete in all respect With the prior approval of engineer Incharge
-
-
-
10 Pair telephone distribution board
14
-
2156
20 Pair telephone distribution board
2
-
3593
200 Pair telephone distribution board
1
-
22543
Supplying and laying of following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, armored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. ( NS ITEM)complete in all respect With the prior approval of engineer Incharge
-
-
-
10 Pair
730
-
292
20 Pair
90
-
441
200 Pair telephone distribution board
100
-
2658
L.T. CABLES SUPPLY (POLYCAB/KEI/RR KABEL: Supply of the following 1100 Volts Al/ Cu. Conductor, PVC insulated PVC sheathed, steel armoured/ unarmoured or XLPE cables as per IS-1554/ 7098 Part- I and as per standard specification ( NS ITEM) complete in all respect With the prior approval of engineer Incharge
-
-
-
3.5 core 240 sq.mm AL. XLPE ARM CABLE
260
-
2243
3.5 core 185 sq.mm AL. XLPE ARM CABLE
275
-
1502
3.5 core 120 sq.mm AL. XLPE ARM CABLE
285
-
1014
3.5 core 70 sq.mm AL. XLPE ARM CABLE
60
-
658
3.5 core 35 sq.mm AL. XLPE ARM CABLE
40
-
369
4 core 25 sq.mm AL. XLPE ARM CABLE
700
-
326
1 core 25 sq.mm CU. XLPE UNARM CABLE
180
-
527
MISCELLANEOUS ITEMS : Supply and Installation of First aid box as approved by St. John Ambulance Brigade/Indian Red Cross conforming to IS : 2217-1963. ( NS ITEM) complete in all respect With the prior approval of engineer Incharge
1
-
5226
Supply and Installation of Shock treatment chart in Hindi and English duly mounted on a wooden frame with glass. ( NS ITEM) complete in all respect With the prior approval of engineer Incharge
1
-
1183
Supply and Installation of Rubber mat 1m x 2m x 3mm. thick to withstand 1.1 KV dielectric strength as per IS : 5424 - 1969. ( NS ITEM) complete in all respect With the prior approval of engineer Incharge
4
-
2930
Supply and Installation of Rubber gloves of 1.1 KV grade as per IS 4770-68. ( NS ITEM) complete in all respect With the prior approval of engineer Incharge
1
-
914
FIRE FIGHTING WORKS :
M S PIPE , VALVES AND FITTINGS: Supply & installation of ISI marked single headed 63 mm dia gunmetal hydrant valve, 80mm dia flanged inlet with 63 mm female instantaneous outlet confirming to IS”5290 on the fire wet riser/down corner, including making 80NB pipe connection with riser along with 100 mm dia dial pressure gauge of calibration 0-15 Kg/sqmm fixing the landing valves in proper positions including supply of nuts, bolts gaskets, caps chains etc, testing the hydrant and completing the work in all respect as per directions of the engineer in charge. (N.S.ITEM) (Safeguard/Safex/Minimax/Newage make with prior approval of Engineerin charge. complete in all respect With the prior approval of engineer Incharge
24
-
14815
Providing and Fixing ISI marked RRL (IS:636 type-A) fire hose pipe 15 meter long and 63 mm dia with ISI marked (IS: 903) gun metal/stainless steel male and female coupling bound and riveted to hose pipes with copper rivets and copper wire complee as required. (N.S.ITEM) (Make: Newage / Safeguard)
48
-
8172
Supply fixing testing and commissiniing of 20mm bore and 30meter long hose (high pressure rubber braided hose pipe as per IS:44) and hose reel suitable for 10 kg/sqmm operating pressure for first aid fire fighting conforming to IS:884 with 180 degree full swing Drum, fixing brackets shut off gunmetal, 40mm dia hand lever operated isolating Gun Metal Stop valve connecting directly from the riser through 40 mm dia GI pipe with sockets, elbows nipples etc including providing operating instructions on a metal plate and fixing it near hose reel complete in all respects as per drawings and directions of engineer in charge ( For Internal Hydrants). (N.S.ITEM) (Make: /Newage / Safeguard) complete in all respect With the prior approval of engineer Incharge
24
-
15158
Providing gun metal/stainless steel ISI marked 63 mm dia male instantaneous pattern short branch pipes and 20mm dia. Nozzle as per IS:903 suitable for 10kg/sqmm operating pressure and suitable for interconnections to hose pipe coupling as required. (N.S.ITEM) (Make:C13Newage / Safeguard) complete in all respect With the prior approval of engineer Incharge
24
-
2834
Providing and fixing standard carbon steel fireman axe with rubber insulated handled tested to 20000 volts. (N.S.ITEM) complete in all respect With the prior approval of engineer Incharge
24
-
1021
Supply and installation of cast iron body 3 way 63mm dia male instantaneous inlet coupling complete with cap and chain for fire bridgade connection conforming to IS: 904 and making connectin with fire fighting pipe or under ground water tank, completing the work in all respect as per the directions of the engineer-in-charge. (N.S.ITEM) (Make: Safeguard / Safex/Minimax/Newage)
1
-
19112
Providing and fixing standard fire hose cabinet suitable to fit in the 'Fire Shaft made of not less than 16 SWG MS sheet having full fronted glass hindged door (5 mm thick clear glass)including necessary locking arrangement with handle as required as per drawings, including brackets for mounting accessories, painting (One coat primer and two coats of fire red colour). The door shall be fixed in the masonry wall as required. The words :Fire Hose” to be painted on the box. ( For Internal Hydrants) Size : 2100 x 1000. (N.S.ITEM) complete in all respect With the prior approval of engineer Incharge
24
-
27020
Weather proof hose cabinets fabricated from 16 g m.s. sheet with full glass door and locking arrangement, suitable to accommodate one hydrant landing valve, 2 nos. 15 m long hoses and 1-no. branch pipe. the cabinet shall be painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and shall be suitably mounted on a raised masonry platform as required. (approx. .75 m x 0.6 m x 0.3 m). the size & shape shall be subject to site conditions & prior approval. (N.S.ITEM) (For External Hydrant) complete in all respect With the prior approval of engineer Incharge
24
-
11533
Providing , laying ,testing and coimmissioning of 'C' Class heavy duty M.S pipe confirming to IS 1239/ 3589 i/c fittings like elbows ,tees, flanges, tapers, nuts bolts, gasket etc.in ground including excavation and providing cement concrete blocks, as supports , antocorrosive treatment with coaltar / asphalt tape as per IS 10221, refilling the trench etc. of the following sizes: 200 mm Dia. (N.S.ITEM) complete in all respect With the prior approval of engineer Incharge
40
-
6175
Providing , laying ,testing and coimmissioning of 'C' Class heavy duty M.S pipe confirming to IS 1239/ 3589 i/c fittings like elbows ,tees, flanges, tapers, nuts bolts, gasket etc, fixing the pipe on wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required for the following sizes:(N.S.ITEM) complete in all respect With the prior approval of engineer Incharge
-
-
-
25 mm dia
495
-
660
32 mm dia
60
-
829
40 mm dia
200
-
941
65 mm dia
100
-
1580
80 mm dia
120
-
1910
100 mm dia
140
-
2630
125 mm dia
5
-
3588
150 mm dia
281
-
3758
200 mm dia
10
-
5595
250 mm dia
10
-
7011
Providing, fixing , testing and of commissioning of Butterfly valves PN 1.6 with EPDM/Nitrile seat with nuts bolts washers, gaskets conforming to IS 13095 / BS:593 of following sizes as required for the following sizes as required :(N.S.ITEM) complete in all respect With the prior approval of engineer Incharge
-
-
-
200 MM DIA
7
-
23920
150 MM DIA
8
-
12184
100 MM DIA
3
-
7940
80 MM DIA.
3
-
6321
65 MM DIA.
1
-
5529
50 MM DIA.
1
-
4953
Gun Metal Ball Valves ISI Marked screwed type tested to 20 kg/cm2 pressure ( IS-778-1984) of the following sizes: (N.S.ITEM) complete in all respect With the prior approval of engineer Incharge
-
-
-
(a) 25 MM DIA.
2
-
1397
(a) 32 MM DIA.
1
-
2340
(a) 40 MM DIA.
2
-
3394
Providing, fixing , testing and of commissioning of dual plate , non-return valve confirming to IS :5312 complete with rubber gasket , GI Bolts , nuts , washers etc as required of following sizes :(N.S.ITEM) complete in all respect With the prior approval of engineer Incharge
-
-
-
80 MM DIA.
2
-
8969
150 MM DIA
6
-
13937
200MM DIA
1
-
29320
Supplying, Installing and Commissioning C. I. Flanged "Y" type Strainer with SS mesh,suitable flanges, nuts, bolts, gaskets etc. complete for the dia of : (N.S.ITEM) complete in all respect With the prior approval of engineer Incharge
-
-
-
200 NB
2
-
48760
65 NB
1
-
11700
Providing and fixing Air Vessel made of 250mm dia , 8 mm thick MS Sheet , 1200 MM in height , with 25mm dia air release valve with brass isolating ball valve, flanges/union, suitable for sprinkler/wet riser/down comer system with drain arrangement with 25 mm dia Gun Metal Valve with all necessary connections complete in all respects. (N.S.ITEM) complete in all respect With the prior approval of engineer Incharge
4
-
37499
Supplying, Installation,Testing & Commissioning of 15 mm dia quartzoid Bulb Type G.M. Sprinkler Head sutable to operate at 68* C complete as reqd.(UL/FM/LPC listed/Approved). (N.S.ITEM) (Make : HD Fire / TYCO) complete in all respect With the prior approval of engineer Incharge
295
-
701
Providing and fixing flexible expansion joints (rubber bellows) for suction and discharge of pump header suitable for raw water upto 70 deg.c (working pressure of 10-15 kg/cm2) complete in all respect With the prior approval of engineer Incharge . (N.S.ITEM)
-
-
-
25 MM DIA NB
2
-
5714
40 MM DIA NB
3
-
6829
50 MM DIA NB
3
-
7908
80 MM DIA NB
2
-
10182
100 MM DIA NB
2
-
11816
150 MM DIA NB
2
-
14973
Supply, assembling and installing all the materials for making GI plate earthing station as per latest edition of is 3043 comprising of 1 no. GI earthing plate 600x600x6 mmhick, 20mm dia medium class gi watering pipe, minimum 4.5 mtr deep gi funnel with stainess steel wire mesh, watering chamber made out of bricks and covered with steel hinged door on a sel frame, 50 kg of common salt, 100 kg of fine charcoal powder, earthing conductor of size 50x6 mm gi from plate to ground level, required hardware etc. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
2
-
32951
Providing & fixing G.I Earthing strip of size 32 mm x 6 mm including clamps, screwed, saddles etc. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
100
-
587
FIRE PUMPS & ACCESSORIES: Supply, fixing testing and commissioning of electrical motor driven fire pump, suitable for automatic operation consisting of following:
-
-
-
Horizontally mounted, centrifugal fire pump as per IS: 1520 complete for delivery of under mentioned discharged against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and fartherst outlet at the specified flow complete with necessary strainers, 100mm dia dial pressure gauge of calibratin 0-15 kg/sq cm including by pass arrangement ofor periodic testing of the working of the pumpset as well as testing of automation , anti vibration pads , for proper completion of work. The pump shal be capable of giving 150% of rated discharge at head not less than 65% of rated head. The pump shall be provided with mechanical seals. The impeller shall be enclosed type and accurately balanced dynamically. The pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. (N.S.ITEM) Make: Kirloskar/Mather+Platt)
-
-
-
Squirel cage TEFC induction motor as per IS: 325, suitable for 415 V,3 phase IP 55 protection and class ‘F’ insulation vaccume impregnated windings with heat and moisture resisting varnish for the avove pump and flexible coupling with the pump. The motor shall be rate for continuous duty and shall have HP rating necessary to drive the pump at 150% of its rated discharge at 65% of rated head. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
-
-
-
Common bed plate of fabricated mild steel channel or cast iron type, coupling, coupling guard ets as required.
Suitable cement concrete pump foundation and vibration clamping arrangement as required with foundation bolts anti vibration pads washers etc. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
-
-
-
(a). Pressure switch for automatic operation of motor including necessary Copper Cabling/ wiring upto control panel. Main Fire Hydrant Pump. Type of Pump-------------------------- End Suction. Capacity - 2280 LPM. Head 80 M. HP of Motor As required but not less than 60 HP. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
1
-
495587
Main Sprikler Pump : Type of Pump-------------- End Suction. Capacity - 2280 LPM. Head 80 M. HP of Motor As required but not less than 60 HP. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
1
-
495587
Fire Jockey Pump: Type of Pump------------ End Suction. Capacity 180 LPM. Head 80 M. HP of Moto As required but not less than 12.5 HP. Motor RPM 2900. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
1
-
202980
Sprikler Jockey Pump: Type of Pump------End Suction. Capacity 180 LPM. Head 80 M. HP of Motor As required but not less than 12.5 HP. Motor RPM 2900. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
1
-
202980
Terrace Pump: Type of Pump------End Suction. Capacity 900 LPM. Head 30 M. HP of Motor As required but not less than 12.5 HP. Motor RPM 2900. complete in all respect With the prior approval of engineer Incharge (N.S.ITEM)
1
-
168710
Supply, installation, testing & commissioning of Diesel Engine Driven common stand by pump, horizontal centrifugal end suction type, capable to deliver 2280 LPM at 80 m head. The pump shall be coupled to suitable HP of Diesel engine, radiator water cooled type with suitable speed and complete set shall be mounted on common base frame. Batteries 12/24 V & battery leads with stand, Fuel tank with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes Pressure gauge,Pressure switch, interconnecting cable, coupling gaurd, anti vibration pads Aluminium, and other standard accessories, and foundation bolts (as recommended by manufacturer) etc. complete and the capacity of the day tank should be 6 Hrs of the SFC with support structure anchoring arrangement, with all controls and valves strictly as per approved SLD. KIrloskar/Mother -Platt
-
-
-
Specifications-- Diesel Engine Pump - 85 HP - 1 No: a. Battery charger with transformer with rectifier resistance DC ammeter, DC voltmeter, Trickle / booster / off selector switch - 2 Nos. b.set of indicating lamps for the following : 1. phase indication. 2. battery charger on. 3. over load relay. 4. DC supply on. 5. control switch on. 6. fault communication. 7. Engine fails to start. 8. Pump on. 9. Low oil pressure. 10. High water temperature. 11. Auto manual selector switch. 12. DC Fail. c) 2 sets of push button stations for the following : 1. Engine Start.2. Engine Stop. 3. Engine - hooter ACK. 4. Engine - fault reset. d) Selector switches (Engine control, mode selector)-1 No. e) Auxiliary relays / contractors / timer for sequence operating for starting and stopping of the engine - 1 set. f) Hooter for audio alarm (Industrial type) - 1 No. complete in all respect With the prior approval of engineer Incharge
1
-
938452
PUMP CONTROL CENTRES:Fabricating & Supply, installing, testing and commissioning of compartmentalized common control panel for Electrical motor driven pumps - colour RAL 7035, free standing and top entry. Please refer the panel specs for more details.( Current density shall be 0.8 amp / sqmm), Front access only. The Gland plate shall be 3mm thick.
-
-
-
INCOMING: 1 no. 400A TPN MCCB (35 KA).- with rotary handle outside. 1 Set of 400 Amps. TPN Al. Bus bars with colour coded heat shrinkable PVC sleeves. 1 Set of RYB indicating lamps with individual MCB's at incomer and outgoing. 1 No. 0-400 Amps. Ammeter with selector switch and suitable rated current transformers. 1 No. 0-500 Voltmeter with selector switch.
-
-
-
OUTGOING: Feeder for 60 HP Main Electrical Pumps( Main Pump & Sprinkler Pump) – 2 Nos. 1 No.250A TPN MCCB - 35 KA, TM based release. Motor Duty. STAR DELTA starter type 2 co-ordination with over load relay - 3RB 21 / 25 Class 10 - 30 settable , provided on main circuit, with single phase preventor and indicating lamps with ON / OFF push buttons. Contractor selection shall be for heavy duty application. 1 No. Auto manual selector switch. 1 No 0- 500 Amps Ammeter with selector switch. Feeder for 12.5 HP Jockey Pump - 2 No. 1 No.63 A TP MCCB suitable size. DOL starter with over load relay, single phase preventor and indicating lamps with ON / OFF push buttons. 1 No. Auto manual selector switch. 1 No 0- 100 Amps Ammeter with selector switch. Feeder for 12.5 HP Terrace Pump and Pump Room at Terrace. 1 No.63 A TPN MCCB suitable size-- 1 No. Spare Feedres 63 A TPN MCCB--- 2Nos. h. Spare MCBs. 1. 63 A TP MCCB 25 KA---- 2 Nos. 2 32 A MCCB 25 KA-- 2 nos complete in all respect With the prior approval of engineer Incharge
1
-
471862
All interconnecting power & control wires/cables of suitable size within the panel and from panel to motors, diesel engine, pressure switches, level switches etc. including brass glands and termination within fire pump house and earthing as per specifications (power cable size shall not be less than 3.5 c x 120 mm sq. for main pump motor and 4 x 10 mm sq. XLPE Al armoured for Jockey pump motor. complete in all respect With the prior approval of engineer Incharge
1
-
309742
Terrace Floor ---Fabricating & Supply, installing, testing and commissioning of compartmentalized common control panel for Electrical motor driven pumps - colour RAL 7035, free standing and top entry. Please refer the panel specs for more details.( Current density shall be 0.8 amp / sqmm), Front access only. The Gland plate shall be 3mm thick.complete in all respect With the prior approval of engineer Incharge
-
-
-
INCOMING: 1 no. 63A TPN MCCB (25 KA).- with rotary handle outside. 1 Set 100 Amps. TPN Al. Bus bars with colour coded heat shrinkable PVC sleeves. 1 Set of RYB indicating lamps with individual MCB's at incomer and outgoing. 1 No. 0-100 Amps. Ammeter with selector switch and suitable rated current transformers. 1 No. 0-500 Voltmeter with selector switch. OUTGOING: Feeder for 12.5 HP Terrace Pump. 1 No.63A TPN MCCB - 35 KA, TM based release. Motor Duty. DOL starter with over load relay, single phase preventor and indicating lamps with ON / OFF push buttons.Indicating lamps etc as required. 1 No. Auto manual selector switch. 1 No. Auto manual selector switch. 1 No. Auto manual selector switch. 1 No 0- 100 Amps Ammeter with selector switch. Spare Feeders-- 32 A TPN MCB-- 2 No.
1
-
63266
Note: All the components shall be housed in a common cubical made of 16 swg. M.S. sheet with required stiffeners ( if required). The panel shall be powder coated of required approved colour both inside & out side. The panel shall have both bottom & top cable entry provision complete in all respect With the prior approval of engineer Incharge
-
-
-
PORTABLE FIRE EXTIGUSHERS: Fire extinguishers ABC dry powder 6Kg capacity. (Make: Minimax / Safex / SAFEGUARD) complete in all respect With the prior approval of engineer Incharge
48
-
3097
H2O / Co2 9 Ltr Capacity (Make: Minimax / Safex / SAFEGUARD) complete in all respect With the prior approval of engineer Incharge
48
-
2768
Co2 4.5Kg Capacity (Make: Minimax / Safex / SAFEGUARD) complete in all respect With the prior approval of engineer Incharge
24
-
7464
Supply & fixing of MS round bottom fire buckets of 9 liters capacity filled with sand including proper supporting/hanging arrangements in MS fabrication painted by fire red color over two coats of primer complete in all respects as per the directions of engineer in charge. complete in all respect With the prior approval of engineer Incharge
2
-
2405
Providing & fixing of photoluminescent, non toxic, non-radio active, maintenance free self glowing, exit signs of over all size 300 mm x 150 mm with aluminimum sheet (3 mm thick) and mounting arrangement for wall/ceiling mounting. the colour combination and size of the letters shall be as per is:12349 amended upto date. complete in all respect With the prior approval of engineer Incharge
-
-
-
(a) SINGLE SIDED EXIT SIGNS
72
-
4284
(b) DOUBLE SIDED EXIT SIGNS
4
-
5140
MECHANICAL VENTILATION FOR BASEMENT : AXIAL FLOW FAN: Supply & Installation of high temperature rated Axial Flow Fan. The Fan complete with casing made of Mild Steel duly enamel painted, adjustable pitch die cast aluminium impeller (Hub and blades) and EFF-1 Motor rated for 250 deg C/2Hours Smoke Evacuation & Ventilation system suitable for 415V/3Ph/ 50Hz AC supply. Casing position shall be as per the job requirement and shall be marked on the fan assembly of the following capacities. Supply of Fan Accessories: Mounting clits for ceiling suspension, Inlet Screen, Fire retardant Flexible Canvass Connection at outlet, Grouting Frame, Spring hanger. Noise level not more than 75 dbat 3m Distance. else. Total air, static pressure, fan motor KW and fan motor speed. complete in all respect With the prior approval of engineer Incharge
-
-
-
13,000 CFM, 25mm WG, 3Phase 1400 RPM for Normal Exhaust
2
-
245721
13,000 CFM, 25mm WG, 3Phase 1400 RPM for Fire Exhaust
2
-
245721
1250 CFM, 25mm WG, 0.75KW, 3Phase for Electrical Room
1
-
42416
AIR-DISTRIBUTION WORKS: Supply, Fabrication, installation and testing of sheet metal ducts (FACTORY FABRICATED DUCTS) in accordance with the approved shop drawings complete with all accessories like vanes, flanges, suspension rods, anchor bolts, GI bolts & nuts, canvas connections, duct dampers & splitter dampers etc., and as required by the specifications. All size duct should be with ductmate joints. No C & Ss clip joints should be used. complete in all respect With the prior approval of engineer Incharge
-
-
-
24 gauge ducting
250
-
1384
22 gauge ducting
425
-
1549
20 gauge ducting
175
-
1779
18 gauge ducting
10
-
1977
Fire /motorised damper: Supply installation testing and commissioning of Fire / smoke damper suitable for motorized actuators, sensors, controls and all accessories as per specification. Total area - Fire/ Motorised Damper with Pvc gear ( only damper price). complete in all respect With the prior approval of engineer Incharge
4
-
13036
Fire sensors with all controls, accessories, actuators, and other accessories - Torque 10 Nm
6
-
19112
*Note: The control wiring for the FD control panel connections shall be as per the control & power wiring head. The contractor shall be providing the interocking of the FDs with the Building Fire detection system(BFDS) through AHU control panel so that in case of Fire, the signal shall be able to stop the power supply to the AHU motor. The final connection for the BFFS shall be carried our by the seperate agency dealing in Fire detection system at site. complete in all respect With the prior approval of engineer Incharge
-
-
-
Volume Control Dampers: Supply, installation, testing and balancing of Volume Control Dampers with operating handle for duct branches in accordance with the approved shop drawings and specifications.
6
-
9436
Aluminium Grilles: Powder coated extruded Aluminum Grilles with end flanges, and required cut to size as per approved drawings and specifications. Grille should be fixed with opposed blade aluminum collar damper. complete in all respect With the prior approval of engineer Incharge
-
-
-
Supply air, Fresh air & Exhaust air grille with collar damper.
10
-
12521
LOUVERS: Supply, installation, testing and balancing of Extruded Al. powder coated Rain Protection louvers with both side flange for Air intake and Exhaust as per specification & approved shop drawing. For Fresh air louvers shall be installed with filter box. The Louver velocity shall not exceed 2.5 m/s for intake and 4 m/s for air out. complete in all respect With the prior approval of engineer Incharge
7
-
14235
CANVASS CONNECTIONS: Supply, installation and balancing of Single Layer Insulated 70 /100 MM WIDE Canvass Connection complete in all respect With the prior approval of engineer Incharge
1
-
3361
MCC-01-Ventilation Fans-Basement; located @ basement near Vent fans: Supply, erection, testing and commissioning of wall/Floor mounted control panel made out of 16 G MS sheet metal duly powder coated and comprising combination fuse switch units, incoming MCCBs, Indicators, Ammeter, Volt meter, CTs, cable alleys, connecting strips with lugs and ferruls, internal copper control wiring panel signage and Tagged etc. complete hinged doors with gaskets etc., all assembled on as per design and specifications as per below data: Incoming MCCB-160A-1#, Outgoing MPCBs, star delta motor starter with OLR, timer, indicators, Ammeter, CTs suitable 5.5KW axial flow fans-4 nos and DOL of 0.75KW. Automatic timer controller to be attached with the starter panel for Basement ventilation exhaust fans for Auto timer peration of the ventilation fans as per designed usage and requirement in 24 hour format. Outgoing MPCBs, DOL motor starter with OLR, timer, indicators, Ammeter, CTs suitable 1.0KW-5.5KW axial flow fans/exhaust fans-5 sets. complete in all respect With the prior approval of engineer Incharge
1
-
415186
POWER CABLES: Supply, Laying, installation testing and commissioning of following 1100 volt grade PVC FRLS sheathed XLPE 2XFY insulated copper/Aluminium conductor armoured cables as per specification in existing RCC/PVC pipe/Burried in ground or on cable trays, includes anchor fasteners with clamps, saddles fixing bolts, 1.2 mm thick aluminium engraved cable tags at both ends etc. As per technical specifications with all the necessary mounting accessories as required for complete installation. complete in all respect With the prior approval of engineer Incharge
-
-
-
4 mm² x 3 Core Copper Armoured
400
-
679
1.5 mm² x 3 Core unarmoured ATC conductor multistranded cable.
50
-
198
Cable Trays : Supply and erection of 1.6 mm thick slotted type, hot dip galvanized, cable trays and cable tray supports out of rolled Sheet, sections, pipes, plates, etc. including welding, anchorbolts, threaded down rods, bolting, riveting, supply of necessary anchor bolts and grouting etc. including breaking walls, floors, etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-charge. The rate shall include supply & fixing of MS Grip bolts in columns/beams/walls/ceiling etc.as required & including drilling . Rod supports shall be of galvanized full threaded rods of sizes 8,10 & 12mm dia for fixing to anchor fastener, anchor bolts etc. For the purposes of quoting rate per meter Contractor to include the cost of all the above. No separate measurement or payment will be considered. complete in all respect With the prior approval of engineer Incharge
-
-
-
300 mm wide x 50 mm high.
50
-
1588
150 mm wide x 50 mm high
200
-
995
Supply & Installation of GI wires for earthing and to be run with the power cable. complete in all respect With the prior approval of engineer Incharge
-
-
-
8 SWG GI wire.
550
-
65
Supply, Installation of MS support for Fans/ Ducts etc duly cut to length, painted with primer and paint as approved by Engineer-in-charge complete in all respect With the prior approval of engineer Incharge .
50
-
1588
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements