Gurugram Metropolitan Development Authority Tender

Supplying and fixing single sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 3.80 to 4.00kg/m with minimum tensile strength 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate in front and 3mm ACP sheet reinforced with internal support frame at rear completely sealed with the of silicon and EPDM to make it dust and water proof should have the inbuilt strong clipping and frame arrangement for holding the flex or digital media along with all necessary cleats and corner joinery required to build thus signage with sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft. The aluminum frame should have polyester powder coating with minimum thickness of 60 micron. Signage should have inbuilt arrangement of mounting it with the bus shelter structure. The enclosure should provide weatherproof protection required for the signage to operate outdoors, having inbuilt ventilation systems.

Supplying and fixing of double-sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 5.3 to 5.5kg/m with minimum tensile strength 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate on both side and reinforced with internal support frame, completely sealed with the help of silicon and EPDM to make it dust and waterproof. Should have the inbuilt STRONG clipping and frame arrangement for holding the flex of digital media along with all necessary cleats and corner joinery require to build the signage with sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft. The aluminum frame should have polyester powder coating with minimum thickness of 60-micron, signage should have inbuilt arrangement of mounting it with the bus shelter structure. The enclosure should provide weatherproof protection required for the signage to operate outdoors, having inbuilt ventilation systems. (measurements for double sided signage to be taken for both sides during billing)

Vandal resistant light source of polycarbonate body with compact fluorescent lamp of white color of 55w of standard, MY 1: of approved make with IP 67 approval, including cable fixing, switchgear etc. all complete.

Providing and fixing MS Electrical weatherproof leader box approximately 600mm wide and 900mm high as required for installing MCB switch gear and meters as required for advertisement and other electrical gear, with provision for inserting cable contrails as per design. The access to feeder box shall be through a toll based (common for all locks provided in each package) key, Tools should not be identical for different package shelters.

Providing and fixing anodized aluminum 25 x 50mm channel frame with 40W standard manufactured tube light fittings with electronic choke starters and wiring all complete connection to electrical supply drum feeder box with minimum 4 tube lights x per square meter (of add panel size) or actual requirement decided by the engineer in charge. The tube light frame and fittings (including that in feeder pillar) should include ballast ELCB timer MCB mounting blocks etc. The tube light alignment should allow two-way lighting (front and back) of add panel (22W LED light provision).

Providing and fixing heavy duty SS prefabricated dust bins with canopy and two-point support grouted in cement mortar and finished as per floor finish.

Providing and fixing 5-walled, 10mm thick polycarbonate multiwall sheet bronze color having a light transmission of 37% with a U-value of 2.39 w/m2 K. Lexan thermoclear multiwall sheet LT2UV105R175 from SABIC innovative plastics or Equivalent. Fixing of the 10mm sheet to be done with profiles having EPDM / silicon. Aluminum profiles need to use and front, and rear of polycarbonate sheet has to be closed by aluminum profile.

Supply and erection of PVC Copper insulated and sheathed 1x0.75 sq. mm 2 core circular flexible wire for internal connection of single, double sided signages and route display, Vandal Light etc. complete in all respect.

Supply and erection of PVC Copper insulated and sheathed 2x2.5 sq. mm 2 core circular flexible wire for internal connection of single, double sided signages and route display, Vandal light etc. complete in all respect.

Providing and laying of Jamuna Sand complete in the satisfaction of engineer in charge

Providing and fixing Austenitic stainless steel (Grade 304 shall contain 17-18% chromium and 8-11% nickel as per specification) structure made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the Structure/railing with necessary accessories and stainless-steel dash fasteners, stainless steel bolts etc., of required size, with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless-steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)