Gurugram Metropolitan Development Authority Tender

CABLES: 12kV Heat shrink type termination kit for 12kV (E) XLPE Cables of 3 Core x 240 sq.mm size. , Outdoor type

LT CABLES: 1.1 KV PVC insulated and sheathed, steel armoured Aluminimum conductor cable of the following size including cable support (For AC supply and yard lighting) , 4 core x 16 sq.mm (GI round wire armoured)

LT CABLES: 1100 V grade, PVC insulated, PVC sheathed, steel round wire armoured, stranded control cables of the following sizes: Copper Control Cable , 4 core 2.5 sq.mm

LT CABLES: 1100 V grade, PVC insulated, PVC sheathed, steel round wire armoured, stranded control cables of the following sizes: Copper Control Cable , 12 core 2.5 sq.mm

EARTHING AND LIGHTNING PROTECTION : Main Earth mat Conductor and Risers for Main Equipments etc ( 75 x 12 mm G I flat).

EARTHING AND LIGHTNING PROTECTION : Earthing riser for builing spikes rod (50x6 GI flat).

CABLE JOINTS : Normal Straight Through Joint suitable for 33KV, 630 sqmm X 1 Core AL Cable as per technical specification.

Conducting reconnoitery survey along shortest route with best proposed route of cable route including evaluation of thermal resistivity of the soil with the cable route .Excavation of trial pits as per field requirements. Preparation of cable route profile, drawing of cable laying final route alignment, marking lines and grades and recheck bill of materials / lengths of the cable for the projects.as per the directions of Engineer-in-charge at site.

Conducting reconnoitery survey along shortest route with best proposed route of cable route including evaluation of thermal resistivity of the soil with the cable route .Excavation of trial pits as per field requirements. Preparation of cable route profile, drawing of cable laying final route alignment, marking lines and grades and recheck bill of materials / lengths of the cable for the projects.as per the directions of Engineer-in-charge at site

TRANSFORMER : 100 KVA, 2 winding,Aluminum Wound, 11/0.433kV 3ph, Dyn-11, outdoor type with cable box on HV/LV sides and complete with all accessories.

36 kV Equipments : Supply , installation , testing and commissioning of 33kV Metering Cubicle alongwith Shed as per DHVBN specification

CABLES : 36 KV Heat Shrink type termination Kit for the following size of 33 kv(E) XLPE Cables 1Core 630 sq mm : (Indoor type )

CABLES : 36 KV Heat Shrink type termination Kit for the following size of 33 kv(E) XLPE Cables 1Core 630 sq mm : (Outdoor Type).

Cables: 12 KV Heat Shrink type termination Kit for the following size of 12 kv(E) XLPE Cables 3 core x 400 sq.mm: (Indoor type).

CABLES: 12kV Heat shrink type termination kit for 12kV (E) XLPE Cables of 3 Core x 240 sq.mm size. , Indoor type.

LT CABLE 1.1kV XLPE insulated `PVC sheathed, GI round wire armoured, aluminium conductor cable of the following sizes: 3.5 core x 300 sq, mm for station transformer.

LT CABLE 1.1kV XLPE insulated `PVC sheathed, GI round wire armoured, aluminium conductor cable of the following sizes: Termination with double compression gland and Al lugs for 3 1/2 core x 300 sq, mm cable.

LT CABLES: 1.1 KV PVC insulated and sheathed, steel armoured Aluminimum conductor cable of the following size including cable support (For AC supply and yard lighting) , 2 core x 6 sq.mm (steel Strip armoured).

LT CABLES: 1100 V grade, PVC insulated, PVC sheathed, steel round wire armoured, stranded control cables of the following sizes: Copper Control Cable , 19 Core 2.5 sq.mm.

LT CABLES: 1100 V grade, PVC insulated, PVC sheathed, steel round wire armoured, stranded control cables of the following sizes: Copper Control Cable , 7 Core 2.5 sq.mm.

LT CABLES: 1100 V grade, PVC insulated, PVC sheathed, steel round wire armoured, stranded control cables of the following sizes: Aluminium Power Cables for lighting and AC Power 4 Core x 10 sq.mm (Aluminium)

LT CABLES: 1100 V grade, PVC insulated, PVC sheathed, steel round wire armoured, stranded control cables of the following sizes: Aluminium Power Cables for lighting and AC Power 3.5 C x 35 Sq.mm.

Double compression glands and terminations (including ferruling, suitable Cu Lugs to meet the system requirements) for 1100V grade PVC insulated multicore Copper stranded conductor control cables of the following sizes: Copper Control Cable , 3 core x 2.5 Sq.mm , 4 core 2.5 sq.mm , 10 core 2.5 sq.mm , 2 Core 6 sq.mm , Aluminium Power Cables , 3.5 Core x 35 sq.mm (Aluminium) , 4 Core x 10 Sq.mm .

Lighting : Flood light fitting with `250 W LED fixture with min 80lx/watt output and control gear for outdoor lighting to be installed on 10m SP410 Steel tubular pole complete with mounting bracket

Lighting : Steel Tubular Poles 10M long for mounting the yard lighting complete with mounting brackets, nuts , bolts as required

Lighting: Lighting junction box for each Light suitable for out door installation comprising of 4 no. CBT M 4 type terminal connector for light connections Max size 150 x150x100mm

Supply ,installation ,testing and commissioning of 12 KV ,3.6 MVAR, capacitor bank double star connected alongwith structure and Current Limiting reactors, NCT etc

Safety equipment : Fire Extinguishers , CO2 type 5 Kg for switchgear room

Safety equipment : Fire Extinguishers . Dry powder chemical type 22.5 kg. For 10/12.5 MVA transformer.

Safety equipment : Fire Extinguishers , Dry powder chemical type 10 kg. For 250 KVA transformer.

Safety equipment : Fire Extinguishers , CO2 type for Control room and Engineers room.

Safety equipment : Fire Extinguishers , Safety accessories such as Rubber mat Min thickness 12mm ( IS Mark/approved make), Gloves, first aid box, shock treatment chart, display boards and tool box etc.as per specification

Structural Steel Dewatering pump (portable type) 415 V, 1 HP as per requirement

CABLES : 36kV XLPE (E) insulated `PVC sheathed, aluminum round wire armoured, aluminum conductor cable of the following size : 1 core 630 sqmm (Aluminum round wire armoured) for 33 KV line and Transformers

CABLE JOINTS: Trifoil clmap used during laying of cable (if any) for 1c x 630 sqmm cable 33kV.

CABLES : 12kV XLPE (E) insulated `PVC sheathed, aluminium round wire armoured, aluminium conductor cable of the following size : 3 core x 400 sq.mm (Aluminium round wire armoured)`.

CABLES : 12 KV Heat Shrink type termination Kit for the following size of 12 kv(E) XLPE Cables - 3 core x 400 sq.mm (Outdoor type)`.

33 KV Yard :- Designing and construction of yard with 100mm thick C.C of M30 concrete after preparation of plinth( i.e compaction and filling of soil followed by 75mm M-10 concrete and so as to achieve the final plinth level which should be 0.75 meter above the existing road level of Behrampur STP.) including cable trenches , all electrical , mechanical works in accordance with approved design and drawings and all other works contingent thereto as per sizes and specification given in DNIT(Item For M-30).

33 KV Yard :- Designing and construction of yard with 100mm thick C.C of M30 concrete after preparation of plinth( i.e compaction and filling of soil followed by 75mm M-10 concrete and so as to achieve the final plinth level which should be 0.75 meter above the existing road level of Behrampur STP.) including cable trenches , all electrical , mechanical works in accordance with approved design and drawings and all other works contingent thereto as per sizes and specification given in DNIT(Item for M-10).

33 KV Yard : Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.Thermo-Mechanically Treated bars of grade Fe-500D kg or more(for M-30) .

Earth mat for 33KV yard :- Design , supply , and erection of earth mat work which includes 16mm thick rod and 20mm thick earth electrodes in accordance with approved design and drawings including excavation and refilling of soil complete in all respect and any other work contingent thereto as per sizes and specification given in DNIT(Steel reinforcement, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more).

Foundation :- Design and construction of RCC Grade M30 Using Concrete Mixer C.C of M30 concrete platforms for , Foundation of 33 KVA transformer , and all other foundations as required as per drawings and Engineer-in-charge , including excavation and back filling as required to the complete satisfaction of Engineer-in-charge as needed and in accordance with approved design and drawings including excavation and refilling of soil complete in all respect and any other work contingent thereto as per sizes and specification given in DNIT

Boundary wall:- Designing and construction of boundary wall of 33 KV substation in Behrampur STP with height shall be 1.50Mtr with RCC pillar @3Mtr C/C as per design / drawing foundation of boundary wall shall be minimum 0.90m below natural ground level.

Foundation :- Steel structure for the following foundations:- Foundation of 33 KVA transformers , and all other foundations as required as per drawings and Engineer-in-charge as needed and in accordance with approved design and drawings complete in all respect and any other work contingent thereto as per sizes and specification given in DNIT(Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.Thermo-Mechanically Treated bars of grade Fe-500D kg or more( for M-30) .

LT CABLES: 1100 V grade, PVC insulated, PVC sheathed, steel round wire armoured, stranded control cables of the following sizes: (Copper Control Cable , 3 core 2.5 sq.mm).

Lighting : Post top lantern with 35W LED lamp with control gear complete with necessary support pipe and bracket, conduit, wire and junction box.

Design and Construction of 3.75 to 5.00 M wide internal CC Roads for complete project with embankment as required gradient with 150mm thick (1:3:6) with concrete base and 200mm thick M-25 Design Mix Concrete with Kerb and channels including construction of CC drain connecting to MPS, Supplying and installing of 8.00 Mtr. high LED solar street light at 30M c/c, Main gates, walkways, leveling etc. complete in all respect and any other work contingent thereto.

TRANSFORMER : Supply , installation , testing and commissioning of 10/12.5 MVA,33/11kV, 3 Ph, `YnYn 0 , two winding , copper wound transformers, ONAN/ ONAF with OLTC. Cable box shall be provided on both HV and LV ). The transformer shall be complete with all accessories and shall be provided with termination arrangement on HV and LV side by providing extended busbars and cable termination support.Arrangement for extension of Bus bars on Trafo HV side with 65x10mm Copper Flat with 33 KV Post Insulators as per the standard practice.

Providing Mics items for Substation like: 2.5kv Megger Digital (Make-Megger) -2 No`s , 3 cells Torch - 5No`s, 5 KV Megger Digital (Make-Megger) - 2No`s , D-Spanner Set Taparia -2 No`s , Danger board -10 No`s , Earth chain brass 12 mtr. Length -4 No`s , Earth Megger Digital (Make-Megger) -2 No`s , First aid Box-1 , HT Hand Gloves - 5 No`s , Instruction board 3’x2½’ of Flex board duly printed - 2 No`s, Insulated electrical Plier Taparia -4, Maximum and tripping display board of size 5’x3’ of mica board moulded with frame duly painted and writing -2 , Pipe wrench, 12` Taparia -3, Rubber mat 1X2MtX 12MM thick suitable for 11kV/33kV di-electic strenght - 10, Shock treatment chart -5 , Shut down / Break down board (Bi-lingual Hindi and English) -2, Single line diagram of size 3’x2½’ on flex board, duly printed -2, Steel Almirah, Godrej -2, Steel cabinet, Godrej -2, Steel office chair -6, Godrej,Steel office table-2, Godrej, (4`x2.5`) , Steel office table- 2, Godrej, (5`x3`) , Sub-station name board (Size 3`x2` of MS sheet and MS angle 45x45x5 mm, Height 1.5 mtr. Above ground level ) -1, duly painted , Sundries items Cable tie, Alu lug, Copper lug and HT, LT tape, pvc compound, ferrule, pvc flexible pipe, paint writing on panels, cable glands for control cable , Wall Clock .

supply and erection of 11m H-pole with all Accessories suitable for 8 No`s single core 630sqmm cable.

Supply, installation, testing and commissioning of Pre-fabricated Containerized Substation having IP 54 enclosure with 50mm rockwool 2hr Fire rated thermal insulation Sandwich Panel and as per TS, consists of the following a. 33kV Indoor Primary GIS as per TS ( 2 Incomer VCB plus 2 Transformer Outgoing plus 1 Buscoupler with Raiser plus 2 BusPT plus space for adding 2 feeders in future) – 1Set. b. 11kV Indoor Primary GIS as per TS ( 2 Incomer VCB plus 6 Outgoing VCB plus 1 Buscoupler with Raiser plus plus 2 BusPT plus space for adding 2 feeders in future )-1 set c. Battery Bank 48VDC 100AH - 1 Set d. Dual Float cum Boost Battery Charger suitable for 48 VDC – 1No. e. ACDB – 1 Set f. DCDB- 1 set g. RTCC- 2 set (from Sl. No. 1) h. Fire Alarm System and Fire Extinguisher – 1 Set i. AC system with 100% redundancy for container and AC Control panel – 1 Set j. LT power and control cabling within the container equipment. k. Station earthing grid internal to Container l. Lighting protection for Metallic container . m. Ilumination System normal and emergency (48V DC) lighting, Lighting Panels, switches and sockets. n. Survillance system o. Metallic container with doors with access control, access platforms. p. Supply of termination kits for 33kV and 11KV GIS and termination of cables at GIS end at site. q. Rubber Insulation mats – As required. Size of Container shall be determind as per site space availability (Including casting of plinth above 1meter above the road level)

Operation and Maintenance of 33KV Substation Dhanwapur Including Preventive maintenance and repairing or replacing any equipment as necessary on site during time period Up to the complete satisfaction of Engineer in Incharge.

Supply and Laying of Fiber cable with all accessories and hardware up to the complete satisfaction of Engineer in charge.