Gurugram Metropolitan Development Authority Tender

Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 : 2003 (with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all ressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in- Charge. 1000mm i/d RCC Np3 pipe

Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 : 2003 (with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all ressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in- Charge. 1200mm i/d RCC Np3 pipe

Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 : 2003 (with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all ressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in- Charge. 1400mm i/d RCC Np3 pipe

Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 : 2003 (with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all ressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in- Charge. 1800mm i/d RCC Np3 pipe

Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 : 2003 (with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all ressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in- Charge. 2000mm i/d RCC Np3 pipe

Providing and laying of welded M.S pipe manufactured with M.S. sheet of Jindal / TATA / SAIL/ Welspun / SKS/PSL (P) Ltd and MAAN industries as per IS 2062, IS:3589-2001 including bituminous painting on inner side and outer side epoxy paint coating 250 micron as per relevant specification and IS code including welding and Laying the pipe through trenchless technology by pipe jacking to cross the carriage way including maintain level with the help of laiser guided equipment, excavation of thrust and receiving pit, side shoring, filling back, compaction, disposal of surplus earth including generator, JCB, cranes, pipe jacking machine etc. all material and labours as per requirement, direction of Engineer-in-Charge and complete in all respect including the cost of Ground Penetration Radar Survey including cost of stringing pipes jointing and cutting complete in all respect to the entire satisfaction of the Engineer - in -Charge. 900mm i/d M.S. Casing pipe (10mm thickness) for 600mm i/d RCC Np3 pipe

Providing and laying of welded M.S pipe manufactured with M.S. sheet of Jindal / TATA / SAIL/ Welspun / SKS/PSL (P) Ltd and MAAN industries as per IS 2062, IS:3589-2001 including bituminous painting on inner side and outer side epoxy paint coating 250 micron as per relevant specification and IS code including welding and Laying the pipe through trenchless technology by pipe jacking to cross the carriage way including maintain level with the help of laiser guided equipment, excavation of thrust and receiving pit, side shoring, filling back, compaction, disposal of surplus earth including generator, JCB, cranes, pipe jacking machine etc. all material and labours as per requirement, direction of Engineer-in-Charge and complete in all respect including the cost of Ground Penetration Radar Survey including cost of stringing pipes jointing and cutting complete in all respect to the entire satisfaction of the Engineer - in -Charge. 1400mm i/d M.S. Casing pipe (14mm thickness) for 1000mm i/d RCC Np3 pipe

Providing and laying of welded M.S pipe manufactured with M.S. sheet of Jindal / TATA / SAIL/ Welspun / SKS/PSL (P) Ltd and MAAN industries as per IS 2062, IS:3589-2001 including bituminous painting on inner side and outer side epoxy paint coating 250 micron as per relevant specification and IS code including welding and Laying the pipe through trenchless technology by pipe jacking to cross the carriage way including maintain level with the help of laiser guided equipment, excavation of thrust and receiving pit, side shoring, filling back, compaction, disposal of surplus earth including generator, JCB, cranes, pipe jacking machine etc. all material and labours as per requirement, direction of Engineer-in-Charge and complete in all respect including the cost of Ground Penetration Radar Survey including cost of stringing pipes jointing and cutting complete in all respect to the entire satisfaction of the Engineer - in -Charge. 1800mm i/d M.S. Casing pipe (16mm thickness) for 1200mm i/d RCC Np3 pipe

Providing and laying of welded M.S pipe manufactured with M.S. sheet of Jindal / TATA / SAIL/ Welspun / SKS/PSL (P) Ltd and MAAN industries as per IS 2062, IS:3589-2001 including bituminous painting on inner side and outer side epoxy paint coating 250 micron as per relevant specification and IS code including welding and Laying the pipe through trenchless technology by pipe jacking to cross the carriage way including maintain level with the help of laiser guided equipment, excavation of thrust and receiving pit, side shoring, filling back, compaction, disposal of surplus earth including generator, JCB, cranes, pipe jacking machine etc. all material and labours as per requirement, direction of Engineer-in-Charge and complete in all respect including the cost of Ground Penetration Radar Survey including cost of stringing pipes jointing and cutting complete in all respect to the entire satisfaction of the Engineer - in -Charge. 2000mm i/d M.S. Casing pipe (20mm thickness) for 1400mm i/d RCC Np3 pipe

Providing and laying of welded M.S pipe manufactured with M.S. sheet of Jindal / TATA / SAIL/ Welspun / SKS/PSL (P) Ltd and MAAN industries as per IS 2062, IS:3589-2001 including bituminous painting on inner side and outer side epoxy paint coating 250 micron as per relevant specification and IS code including welding and Laying the pipe through trenchless technology by pipe jacking to cross the carriage way including maintain level with the help of laiser guided equipment, excavation of thrust and receiving pit, side shoring, filling back, compaction, disposal of surplus earth including generator, JCB, cranes, pipe jacking machine etc. all material and labours as per requirement, direction of Engineer-in-Charge and complete in all respect including the cost of Ground Penetration Radar Survey including cost of stringing pipes jointing and cutting complete in all respect to the entire satisfaction of the Engineer - in -Charge. 2600mm i/d M.S. Casing pipe (22mm thickness) for 1800mm i/d RCC Np3 pipe