Government Of Haryana Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 12,62,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HRY_79771_1Bid Award Id
ViewTender No
ADV_SPL_PRJ/GMDATender Authority
Government Of Haryana ViewPurchaser Address
-Website
http://https://haryana.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(DSR No. 6.13.2) Half brick masonry with common burnt clay FPS ( non modular ) bricks of class designation 7.5 in Superstructure above plinth upto floor V level
Cement mortar 1:4 (1 cement : 4 coarse sand)
28.35
-
-
(DSR No. 6.15) Extra for providing and placing in position 2 Nos. 6mm dia MS bars at every 3rd course of half brick masonry
28.35
-
-
(DSR No. 8.2.2.2) Providing and fixing 18 mm thick gang saw cut mirror polished, machine cut for kitchen platforms, vanity counters facias and fimilar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) with joints treated with white cement , mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels.
Granite of any colour and shade area of slab over 0.50 sqm
1.08
-
-
(DSR No. 8.3.2) Extra for providing edge moulding to 18mm thick marble stone counters,Vanities etc. over Item No. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
Granite work
2.4
-
-
(DSR No. 8.4) Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc.complete.
0.24
-
-
(DSR No. 8.5) Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble/stone work including necessary holes for pillar taps etc .including rubbing and polishing of cut edges etc. complete.
1
-
-
(DSR No. 9.1.1) Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position:
Second class teak wood
0.05
-
-
(DSR No. 9.18.1) Providing and fixing Pre-laminated flat pressed 3 layer (medium density)
particle board or graded wood particle board IS : 3087 marked, with one
side decorative and other side balancing lamination Grade I, Type II
exterior grade IS : 12823 marked, in shelves with screws and fittings
wherever required, edges to be painted with polyurethane primer (fittings
to be paid separately).
18 mm thick (for Trap door)
20
-
-
(DSR No. 9.21.1) Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
100.08
-
-
(DSR No. 9.23) Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured)
100.08
-
-
(DSR No. 9.53) Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size).
8
-
-
(DSR No. 9.82) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
47
-
-
(DSR No. 9.84) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories
and screws etc. complete.
47
-
-
(DSR No. 9.97.2) Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete-
250 X 10 mm
47
-
-
(DSR No. 9.97.3) Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete-
200X 10 mm
47
-
-
(DSR No. 9.103) Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of Aluminium lever handles with necessary screws etc. complete ( best make of approved quality)
47
-
-
(DSR No. 10.1) Structural steel work in single section fixed without connecting plate including cutting hoisting, fixing in position & applying priming coat of approved steel primer all complete.
1000
-
-
(DSR No. 11.36) Providing and fixing Ist quallity ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
35.7
-
-
(DSR No. 11.4) Providing and fixing rectified glazed floor tiles 300x300mm 1st quality conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size laid over 20 mm thick bed of cement Mortar 1:4 (1 cement: 4coarse sand) and jointing with white cement slurry and matching pigment complete
5.94
-
-
(DSR No. 11.41.2) Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. best quality as approved.
Size of Tile 600x600 mm
10
-
-
(DSR No. 11.41.4) Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. best quality as approved.
Size of Tile 1000x1000 mm
1620
-
-
(DSR No. 12.45.1) Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm
thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
450
-
-
(DSR No. 13.1.1) 12mm cement plaster of mix:
1:4 ( 1 cement : 4 fine sand)
457.5
-
-
(DSR No. 13.2.1) 15mm cement plaster of mix:
1:4 ( 1 cement : 4 fine sand)
50
-
-
(DSR No. 13.26) Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
915
-
-
(DSR No. 13.50.1) Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
8
-
-
(DSR No. 13.60) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
Two or more coats on new work.
915
-
-
(DSR No. 13.68) French spirit polishing two or more coats on new works including a coat of wood filler complete
8
-
-
(DSR No. 13.8) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
915
-
-
(DSR No. 17.7a) Providing and fixing wash basin with CI Brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making the walls wherever requierd: a) white vitreous china wash basin size 550x400 mm with a 15 mm CP Brass Single Hole basin mixer
1
-
-
(DSR No. 17.16a) Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1meter long with S.S. Triangular plate to european type W.C. Of approved quality and make as approved by engineer in charge.
1
-
-
(DSR No. 17.22A) Providing and fixing CP Brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.
1
-
-
(DSR No. 17.31) Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
-
-
(DSR No. 17.34.2) Providing and fixing toilet paper holder Vitreous china
1
-
-
(DSR No. 17.73.2) 600 mm long towel rail with total length of 645 mm, width
78 mm and effective height of 88 mm, weighing not less
than 190 gms.
1
-
-
(DSR No. 17.78) Providing & Fixing white Vitreous China Extended wall mounting water closet of size 780x730x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litres/8 litres) inluding seat cover, and cistern fittings, nuts, bolts and gasket etc. complete
1
-
-
(DSR No. 17.80) Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
1
-
-
(DSR No. 18.8.1) Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with suports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-In-Charge.
Concealed work including cutting chases and making good the walls etc.
15 mm dia
50
-
-
(DSR No. 18.10.1) Providing and fixing G.I. pipes complete withh G.I. fittings and clamps, i/c cutting and making good the walls etc.
Internal work - Exposed on wall and terrace
15 mm dia
50
-
-
(DSR No. 18.16.1) Providing and Fixing brass Stop Cock of Approved Quality
15 mm nominal bore
2
-
-
(DSR No. 18.21.2.1) Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length
15 mm nominal bore
2
-
-
(DSR No. 18.49.1) Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
a)15 mm nomial bore
1
-
-
(DSR No. 18.53.1) Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
15mm nominal bore
3
-
-
(DSR No. 22.3) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portion of toilet and kitchen and the like consisting of: 1). First course of applying cement slurry @ 4.4 Kg. / sq. m. mixed with water proofing compound, 2). Second course of 20mm Cement plaster 1:3 mixed with WP compound, 3). IIIrd course of appling blown or residual bitumen at 1.7 Kg/Sqm, 4). IVth course of 400 micron PVC sheet
5.94
-
-
(DSR No. 25.5) Providing, fabricating and supplying shadow box of required size
and shape, for fixing in the spandrel portion of the structural glazing,
in linear as well as curvilinear portions of the building by providing
semi -rigid, inorganic, non-combustible fibre glass wool insulation
50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The
insulation layer shall have facing (factory bonded on surface # 10f
the fibre glass insulation layer), of black non-woven fibre glass tissue
of nominal thickness 0.5 mm and nominal mass not less than 60
gm / sqm, made of randomly oriented glass fibres distributed in a
binder by a wet-lay process including fixing 1.5 mm thick solid
aluminum sheet backing using, 6 mm thick cement board including
SS rivets, nuts, bolts, washers etc complete.
300
-
-
(DSR No. 26.23.1) Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595 x 595 mm of approved texture , designs and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per
IS 8225:1987, Light reflectance of 85% (minimum). Non combustible
as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),
humidity resistance of 100%, thermal conductivity 0.043 W/m K
as per ASTM 518:1991, in true horizontal level suspended on interlocking
metal powder coated T-Grid of hot dipped galvanised iron
section of 0.40 mm thick on Silhouette profile,rotary stiched double
webbed white with 6 mm reveal profile (white/black),comprising of
main-T runners of size 15x42 mm of length 3000 mm, cross - T of
size 15x42 mm of length 1200 mm and secondary intermediate
cross-T of size 15x42 mm of length 600mm to form grid module of
size 600 x 600 mm, suspended from ceiling using galvanised mild
steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8
mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded
hanger rod upto 1000 mm length and L-shape level adjuster of size
85x25x2 mm. Galvanised iron perimeter wall angle of size
22x19x0.40 mm of length 3000 mm to be fixed on periphery wall /
partition with the help of plastic rawl plugs at 450 mm center to
center and 40mm long dry wall S.S screws. The work shall be carried
out as per specifications, drawing and as per directions of the
Engineer-in-Charge.
With 15 mm thick integral densified micro edge light
weight calcium silicate false ceiling tiles
1350
-
-
Civil Non DSR Items
-
-
-
(Non DSR No. MR 101) Providing and laying 8mm thk laminated wooden flooring ( grade AC4 ) of pergo / Armstrong or equivalent make and as per approved sample, colour and laid on the existing levelled flooring with approved adhesive & ScratchGuard Advanced protection wear layer for superior scratch and scuff resistance. Micro bevel edges with Click-joints for snap-together installation and a core of moisture resestant high-density fiber board With factory installed sound reducing underlayer and on site vapor barrier . including beading half round profile skirting & aluminium edge profile, expansion joints etc. complete as per manufacturers specification & approval of Architect. The vendor to ensure that the base flooring is absolute lvl, without undulation before installation. Back to back 10 year Manufacturer warranties, and guaranties to be provided by vendor.
Quoted Rates are for all heights, depths, levels, leads and lifts and contractor should ensure that no noise/movement shall occur in wooden flooring after installation. Warrenty and guarantee shall be as per company standard.
250
-
-
(Non DSR No. MR 102)Providing & Laying foam concrete cast on site over RCC slabs of density 750-1000 cum and having compressive strength of 8 kg/sqcm including necessary levelling with cement plaster 1:4 (1 Cement: 4 Coarse sand) 8 mm thick. The rate include cost of all labour material, centering and shuttering etc. as complete job at all floors as per drawing and direction of engineer in charge.
270
-
-
(Non DSR No. MR 103)Providing and fixing roller blinds with perforated screen fabric of approved colour shade with approximate 38mm OD. Top tube having an inbuilt spring clutch system and an idler made of fibre glass reinforced polyester for a smooth operation through a centrally rotating shaft. The clutch assembly shall be be move bi-directionally by means of a nickel coated brass chain with bead pitch of 6mm. The roller binds fabric shall be composed of polyester/PVC/Fibreglass with specified openness factor and weight and shall have a strong cut-off of UV radiations yet keeping a high level of colour light fastness. The fabric shall have M1 and NFPA-701 fire classifications and comply with green building/Lead credits insuring a safe and healthy indoor air quality for the inhabitors. The roller tube with the inner ribs,clutch spring assembly,fibreglass reinforced idler,insert type brackets,
brass beaded chain bottom bar, fabrics,Motors, Remote handsets as specified and approved,etc. all complete as per apparoved manufacturer specification and as directed by the Engineer in Charge.
Roller Tube Control Roller Tube shall be of extruded Aluminium alloy 38-mm O.D with a minimum wall thickness of 1.0mm duly anodised for long life(15 Micron).
Clutch
Clutch shall have a carbon steel spring wrapped by means of a high strength fibreglass reinforced polyster assembly to transmit motion from driving to driven members of clutch mechanism. Clutch shall operate bi-directionally with the use of an endless S.S. beaded chain. Clutch mechanism shall be crash proof, prevent slippage and shall raise and lower smoothly to any desired height.Clutch shall never need any adjustment.
Idler
Idler shall be of high strength fibreglass reinforced polyster,consisting of an outside sleeve and centre shaft. Sleeve shall provide bearing surface for roller tube and rotate freely on centre shaft, providing smooth, quiet and long wearing operation.
Brackets-Insert Type-Fit with Roller Tube Brackets shall be of made up of steel and powder coated to give lasting finish. Brackets shall ensure overhead, side or face mounting with clutch assembly on either end of the roller.
Round Bottom Rail
Bottom of the blind shall be provided with aluminium tube with oglive ,powder coated in a colour matching to the fabric. The fabric shall be enclosed in the suitably created pocket along with the tube. The tube shall be closed from sides with end caps to ensure a neat look.
Metal Opearting Ball Chain
The Control Unit will be engrooved to accommodate a Stainless Steel Ball Chain with a Ball Pitch of no lesser than 6.5mm to ensure an enduring operation alongwith an aesthetic value.
Perforated Screen Fabric Blind : Composition :12% PES 88%PVC , weight: 555 gm/sqm, Thickness: 0.69 mm, Lightness: 8/8 Blue scale level, UV Bloackage-Approx 95% ,Openness factor 5 %, Dimensional Stability: Variation 0.5%, Fire Classification: FR /NFPA /M1/B1, Breaking resistance: 190 da N/5cm, Inddor Air Quality : Ecocodice Certified /Green Building Certified Providing vertical Roller Blinds including tracks and opetation for opeing on windows of approved make as per selected design VISTA screen roller blind with head rail ELITE fabrics are
Polyvinyl-C fabrics with 5% openness enabling approximately
70% shade. The polymer coating enables to give glare control
and hence it would be easy to work on screens while still
enjoying the view from the window. The composition of fabric
also includes 25% Polyester. Two widths available in this fabric
are 2000 mm and 2500mm. Thickness around 0.65 mm with
tolerance of +5% and weight 470 gsm with tolerance of + 5%.
Fire Resistance test specifies AS 1530-2, AS1530-3; NFPA
701:2004 Method 1; BS 5867-2 Type B. Colour fastdness of
grade 7 according to the Xenon arc lamp test (ISO 105 BO2
1994). A strong fabric with tensile strength in accordance to
test reports; ISO 13934-2-1999;
648
-
-
(Non DSR No. MR 104) Providing and fixing dry Planters round shape of avg. size of 450 dia and 300(H); made of 2 mm thick FRP Sheet as approved by Clinet/Enginner Incharge
20
-
-
(Non DSR No. MR 105) FULL HEIGHT MODULAR PARTITIONS
Providing and fixing Full Height partition of minimum 80 mm thickness and should have clear space of 45-55mm for electrical wiring. The height of partition should be as per Ceiling Height. All metallic parts shall undergo a 7 stage anti rust treatment and shall be powder coated in suede finish to a thickness of minimum 45 microns. All the hardware items should be as per FIRA / ANSI standards. All other items as per IS standards. ( As approved by Engineer-in Charge )
Front/Side Full Ht. Partition-
Modular Partition-The modular partitions shall not be grouted in the floors. The modular partitions shall be an assembly of the following parts:-
Floor Gasket -All modular full Ht.partitions shall be mounted on floor gaskets made of rubber / PVC to provide gripping with the floors. The floor gaskets shall also provide complete sealing of dust and air between the floor and the partition. They shall also conceal the part of the levelers between the bottom of the frame and the floors.
Levellers-Each frame shall be provided with two 10mm leveling bolts which allow 20mm adjustment for floor unevenness. The levelers shall be concealed inside the skirting and shall be completely retracted inside the skirting in case of uniformly flat floors.
Frames shall form the basic support structure for all components and shall be of 80 mm x 35mm CRCA (Cold Rolled Closed Annealed) Steel section. The main vertical member of the frame bearing the load of brackets and storages shall be made of 1.2mm thick CRCA steel. The connecting vertical face shall be made up of minimum 0.8mm thick CRCA Steel. The horizontal members shall be made of 0.8mm CRCA steel. Each individual module shall not be more than 700mm in height and shall not be more than 1200mm in width. Frames can have 1-3 modules in prefabricated form. Additional height shall be achieved by mounting modules over them. The bottom module shall be mounted over a skirting of more than 85mm height. The skirting shall be designed so that switches can be provided on the skirting level. The frames shall also have prefabricated slots for fixing brackets used to support worktops, overhead hampers, gable ends, etc.
The skirting shall be snap fitted on both sides with Skirting Plates made of 0.6mm thick CRCA steel. Wherever switches are provided on the skirting, the skirting plates shall have the necessary slots.
Frame Gasket- Frame modules shall have PVC foam Gaskets of 3-4mm thickness and 8-10mm width pasted with PVA glue along the inner periphery on both sides to prevent sound and dust transmission through the tiles. The frames shall also have 2mm x 10mm foam gaskets pasted with PVA glue on the outer periphery so as to seal the gaps between the adjacent frames.
Ceiling Rail-The telescopic ceiling rails shall be made of aluminium extrusions of 75mm Cross section with 1.2mm thickness. The height of the ceiling rail shall be of 50mm thick. The ceiling rail should allow an height adjustment of 20mm to 25mm upwards. Posts-The frames shall be connected at the junctions by aluminum connectors. The Junction of frames shall be snap fitted with square Posts. The Posts shall be made of aluminium extrusions of 1mm thickness of section 75mm x 75mm for 2-Way & 75mm x 15mm for 3-Way.
Trims-The exposed vertical and horizontal faces of the frames shall be snap fitted with curve trims. The trims shall be made of aluminium extrusions of 1mm thickness and 75mm width in a Curvature of 12mm.
Wire Management-Partition system shall have concealed wire management capabilities to meet requirement and technical specifications and shall be engineered for responsive and feel-safe operations of power, telecommunications and data (LAN) and shall have:- I.Slots shall be provided on Tiles to fix all electrical & data points.
II. Storage for excess wires in the partition.
III. Easy access for further maintenance and capacity to additional power, data, phone point to the panels without the need to dismantle work surface and or partition/panel. LAMINATED TILES: The Laminated tiles shall be made of 8 mm MDF with minimum 0.8 mm Post Lamination on both sides of the tile.
FABRIC TILES: The fabric tiles shall be made of 8 mm MDF with fabric pasted on them by PVA glue. It should be possible to replace the fabric by peeling it off.
SOFT PINUP TILES: The Pinup tiles shall be made of soft board with fabric pasted on them by PVA glue. It should be possible to replace the fabric by peeling it off.
Glass Tiles- Glass Tiles shall be 4 mm clear toughened glass are supplied and fixed from both side with all necessary interior trims and gaskets . There are two glass tiles that can be fitted and are completely interchangeable with regular tiles. Note:-The partition should be adequatly fixed to the ceiling as approved by Engineer in Charge.
1158
-
-
(Non DSR No. MR 107) Tables for Low Height Cubicles
Providing and fixing Table of size as specified below. Worktop made of 25mm thick pre-laminated particle board of interior grade of approved make and shade. The working and non –working edges shall be provided with hot pressed 2mm thick PVC edging using special hot melt glue at high temperature. The worktop shall be supported on CRCA Steel understructure . Understructure consists of 18mm thick prelaminated particle board Beam Panel/CRCA Steel made perforated Modesty Panels complete. 1 No. of Keyboard Tray & 1 No. of 3-Drawer CRCA Steel pedestal has been considered for each table, as specified below. Keyboard pull out tray of made of 1.2 mm thick CRCA steel duly powder coated, of minimum thickness 45 micron, with metallic roller slides on both sides on Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws. The size of Keyboard tray is 240mm x 484mm and shall be suitable to accommodate keyboards of standard sizes. Three 3-drawer unit shall be of size 400 mm (L)x435mm (D)x691(H) made of minimum 0.8mm thick CRCA body and fascia duly powder coated of minimum thickness 45micron. The drawer unit shall consist of two drawers and one filing box mounted on metallic roller slides on both sides. It shall be provided with central lock mechanism with keys and flush handles are to be provided in front to facilitate opening and closing of drawers. The unit is supported on – 4 nos levelers. Credenza size as shown in drawings. The shutters should be made of 0.8 mm thick CRCA powder coated steel sheet. The body should be made of 1.2mm thick CRCA powder coated steel sheet. Shutters should operate on sliding mechanism complete.
Table for LH Cubicle-Main Table of size 1500mm x 600mm x 727mm H with Side Unit of 900mm x 450mm x 727mm H.
116
-
-
(Non DSR No. MR 108) Low Height Partitions for Cubicles:-
P/S Loose Modular Partition with Tile based system of 60 mm thickness of height 1200mm (For Staff Ws)/1500mm (For LH Cubicle) with 2 identical modules of 550mm (For 1200mm H) and skirting height of 100mm including M10x 50mm leveler and have 45-55mm clear space between two tiles for wire management facilities.The basic framework is made up of aluminium with thickness of 1.3mm. Vertical & Horizontal rail is made up of 1.2mm thick of aluminium extrusions with 12mm curvature. Cover Section (Raceways) is made up of minimum 0.8mm thick CRCA steel. All steel parts shall be pretreated for seven stage anti-corrosion treatment followed by epoxy powder coating. The thickness of the powder coating for all the steel and aluminum parts shall be 45microns.Tile Finish-1st Module-PreLaminate & 2nd Module Fabirc .
Tile Finish 1st Module-Laminate & 2nd Module Fabirc with 1 No. of Magnetic Pinup & 1 No. of White Marker Tile.
LAMINATED TILES: The Laminated tiles shall be made of 10mm MDF with 1mm Post Lamination on both sides of the tile.
FABRIC TILES: The fabric tiles shall be made of 12mm MDF with fabric pasted on them by PVA glue. It should be possible to replace the fabric by peeling it off.
SOFT PINUP TILES: The Pinup tiles shall be made of soft board with fabric pasted on them by PVA glue. It should be possible to replace the fabric by peeling it off.
469.8
-
-
(Non DSR No. MR 109) Storage & Cabinets Providing & supplying hinged door Free standing cabinet units of sizes as specified below resting on floor having door, top, sides, back, & shelves in CRCA powder coated steel. The body and Shelves of the cabinets shall be made of 0.8mm CRCA steel. The top of the cabinets shall be made of 2mm thick CRCA steel and the skirting plate shall be made of 1.2mm CRCA steel. The shelves shall be supported on Spring Steel clips and shall be adjustable at intervals of 12.5mm heights. The cabinet shall be provided with CAM Locks. The handles shall be PVC Moulded and shall be flush fitted. The cabinets shall be provided with 4 Nos. M10 levelers for height adjustment upto 25mm.The shutter shall have self-closing hinges.
900mm(w) x 1200mm(h) x 425mm(d)
72
-
-
(Non DSR No. MR 109)Storage & Cabinets Providing & supplying hinged door Free standing cabinet units of sizes as specified below resting on floor having door, top, sides, back, & shelves in CRCA powder coated steel. The body and Shelves of the cabinets shall be made of 0.8mm CRCA steel. The top of the cabinets shall be made of 2mm thick CRCA steel and the skirting plate shall be made of 1.2mm CRCA steel. The shelves shall be supported on Spring Steel clips and shall be adjustable at intervals of 12.5mm heights. The cabinet shall be provided with CAM Locks. The handles shall be PVC Moulded and shall be flush fitted. The cabinets shall be provided with 4 Nos. M10 levelers for height adjustment upto 25mm.The shutter shall have self-closing hinges.
750mm(w) x 1200mm(h) x 425mm(d)
1
-
-
(Non DSR No. MR 109) Storage & Cabinets Providing & supplying hinged door Free standing cabinet units of sizes as specified below resting on floor having door, top, sides, back, & shelves in CRCA powder coated steel. The body and Shelves of the cabinets shall be made of 0.8mm CRCA steel. The top of the cabinets shall be made of 2mm thick CRCA steel and the skirting plate shall be made of 1.2mm CRCA steel. The shelves shall be supported on Spring Steel clips and shall be adjustable at intervals of 12.5mm heights. The cabinet shall be provided with CAM Locks. The handles shall be PVC Moulded and shall be flush fitted. The cabinets shall be provided with 4 Nos. M10 levelers for height adjustment upto 25mm.The shutter shall have self-closing hinges.
750 mm(w) x 1200mm(h) x 425 mm(d)
1
-
-
(Non DSR No. MR 112) Conference Table-
P/S 35 Seater Modular Conference Table of size 1140mm x 1800mm x 727mm H in Multiple Piece made of 25mm thick Prelaminated partical Board with CRCA/Almunium understructure. Power Dock & Cable beam shall be provided for wire management facilities. .
1
-
-
(Non DSR No. MR 113) Conference Table-
P/S 17 Seater Conference Table of size 6000mm x 1500mm x 727mm H in Multiple Piece made of 25mm thick Prelaminated partical Board with CRCA/Almunium understructure. Power Dock & Cable beam shall be provided for wire management facilities.
2
-
-
(Non DSR No. MR 114) Mineral Wool- 40mm thick mineral wool having minimum density of 60kg/cum packed in polythene bags of 200micron thickness of size as per partition shall be filled in gap between tiles of full height patition wall from above skirting level to ceiling height to provide accoustic insulation.
1158
-
-
(Non DSR No. MR 115) Extra for Silhouette grid and globe fully perforated Ceiling Tiles having NRC of 0.75 over DSR Item No. 26.23
1350
-
-
(Non DSR No. MR 116) Supply and fixing of 1 mm Thick Laminate of Approved Make on both side of Flush door Shutters matching to the Laminate of Full Height Modular Partition
200.16
-
-
(Non DSR No. MR 501) SECTION 3 PLUMBING WORK
Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors, sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer. This includes testing of joints complete at all levels. for waste water lines
110mm or nearest outer dia.
50
-
-
Electrical DSR Item
-
-
-
(DSR No. 1.3.3) Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed Steel conduit, with modular switch, modular plate, suitable GI box
and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
Group-C
1054
-
-
(DSR No. 1.5) Wiring for light/ power plug with 2X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC
insulated copper conductor single core cable for loop earthing
as required.
8740
-
-
(DSR No. 1.6) Wiring for light/ power plug with 4X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC
insulated copper conductor single core cable for loop earthing
as required.
300
-
-
(DSR No. 1.7.2) Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single
core cable in surface/ recessed steel conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
100
-
-
(DSR No. 1.7.10) Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single
core cable in surface/ recessed steel conduit as required 4 x 10 sq.mm + 2 x6 sq.mm earth wire
120
-
-
(DSR No. 1.17.2) Supplying and drawing following sizes of FRLS PVC insulated
copper conductor, single core cable in the existing surface/
recessed steel/ PVC conduit as required.
2 x 1.5 sq. mm
2100
-
-
(DSR No. 1.18.2) Supplying and drawing following pair 0.5 mm dia FRLS PVC
insulated annealed copper conductor, unarmored telephone
cable in the existing surface/ recessed steel/ PVC conduit as
required.
2 Pair
2000
-
-
(DSR No. 1.18.3) Supplying and drawing following pair 0.5 mm dia FRLS PVC
insulated annealed copper conductor, unarmored telephone
cable in the existing surface/ recessed steel/ PVC conduit as
required.
4 Pair
500
-
-
(DSR No. 1.19) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm
solid copper conductor PE insulated, shielded with fine tinned
copper braid and protected with PVC sheath in the existing
surface/ recessed steel/ PVC conduit as required.
1250
-
-
(DSR No. 1.20.2) Supplying and fixing of following sizes of steel conduit along
with accessories in surface/recess including painting in case of
surface conduit, or cutting the wall and making good the same
in case of recessed conduit as required.
25 mm
1850
-
-
(DSR No. 1.20.3) Supplying and fixing of following sizes of steel conduit along
with accessories in surface/recess including painting in case of
surface conduit, or cutting the wall and making good the same
in case of recessed conduit as required.
32 mm
1850
-
-
(DSR No. 1.20.4) Supplying and fixing of following sizes of steel conduit along
with accessories in surface/recess including painting in case of
surface conduit, or cutting the wall and making good the same
in case of recessed conduit as required.
40 mm
1850
-
-
(DSR No. 1.24.3) Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required 15/16 A switch
250
-
-
(DSR No. 1.24.4) Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required 3 pin 5/6 A socket outlet
500
-
-
(DSR No. 1.24.5) Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required 6 pin 15/16 A socket outlet
250
-
-
(DSR No. 1.24.6) Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required Telephone Socket outlet
272
-
-
(DSR No. 1.24.7) Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required
TV antenna Socket Outlet
18
-
-
(DSR No. 1.27.1) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75mmX75mm)
272
-
-
(DSR No. 1.27.5) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
8 Module
272
-
-
(DSR No. 1.31) Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular
switch, connections etc. as required.
50
-
-
(DSR No. 1.32) Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A
modular switch, connections etc. as required.
20
-
-
(DSR No. 1.38) Supplying and fixing call bell/ buzzer suitable for single phase,
230 V, complete as required.
27
-
-
(DSR No. 1.53.1) Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the
existing surface/ recessed Steel/ PVC conduit as required.
1 run of cable
6800
-
-
(DSR No. 2.4.3) Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isolator)
8 way (4 + 24), Double door
12
-
-
(DSR No. 2.10.1) S/F 'C' series, SP MCB :
Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single Pole
300
-
-
(DSR No. 2.11) Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
Supplying & fixing single pole blanking plate in the existing MCB DB Complete etc as required
120
-
-
(DSR No. 2.15.3) Supplying and fixing following rating, four pole, (three phase
and neutral), 415 volts, residual current circuit breaker (RCCB),
having a sensitivity current 30 mA in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.
63 amps
12
-
-
(DSR No. 4.6.2) Supplying and installing following size of perforated HotDipped Galvanised Iron cable tray (Galvanisation thickness notless than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended fromthe ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required.
150 mm width X 50 mm depth X 1.6 mm thickness
100
-
-
(DSR No. 5.16) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required
200
-
-
(DSR No. 16.2.10) Supplying, laying/ fixing, testing and commissioning of following
nominal sizes of chilled water piping inside the building (with
necessary clamps, vibration isolators and fittings but excluding
valves, strainers, gauges etc.) duly insulated with following closed
cell elastometric nitrile rubber of minimum 45 Kg / cu m density,
thermal conductivity 0.037 W/MK or better at 20 deg mean
temperature class 'O' insulation applied by suitable adhesive
complete including repairing of damage to building etc. as per
specifications and as required complete in all respect.
Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as
per IS : 1239 and pipes size above 150mm shall be welded black steel
pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S.
Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS
sheet for pipes of 400 mm dia and above.
65 mm dia pipe
25
-
-
(DSR No. 16.2.11) Supplying, laying/ fixing, testing and commissioning of following
nominal sizes of chilled water piping inside the building (with
necessary clamps, vibration isolators and fittings but excluding
valves, strainers, gauges etc.) duly insulated with following closed
cell elastometric nitrile rubber of minimum 45 Kg / cu m density,
thermal conductivity 0.037 W/MK or better at 20 deg mean
temperature class 'O' insulation applied by suitable adhesive
complete including repairing of damage to building etc. as per
specifications and as required complete in all respect.
Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as
per IS : 1239 and pipes size above 150mm shall be welded black steel
pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S.
Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS
sheet for pipes of 400 mm dia and above.
50 mm dia pipe
65
-
-
(DSR No. 16.2.12) Supplying, laying/ fixing, testing and commissioning of following
nominal sizes of chilled water piping inside the building (with
necessary clamps, vibration isolators and fittings but excluding
valves, strainers, gauges etc.) duly insulated with following closed
cell elastometric nitrile rubber of minimum 45 Kg / cu m density,
thermal conductivity 0.037 W/MK or better at 20 deg mean
temperature class 'O' insulation applied by suitable adhesive
complete including repairing of damage to building etc. as per
specifications and as required complete in all respect.
Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as
per IS : 1239 and pipes size above 150mm shall be welded black steel
pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S.
Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS
sheet for pipes of 400 mm dia and above.
40 mm dia pipe
95
-
-
(DSR No. 16.2.13) Supplying, laying/ fixing, testing and commissioning of following
nominal sizes of chilled water piping inside the building (with
necessary clamps, vibration isolators and fittings but excluding
valves, strainers, gauges etc.) duly insulated with following closed
cell elastometric nitrile rubber of minimum 45 Kg / cu m density,
thermal conductivity 0.037 W/MK or better at 20 deg mean
temperature class 'O' insulation applied by suitable adhesive
complete including repairing of damage to building etc. as per
specifications and as required complete in all respect.
Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as
per IS : 1239 and pipes size above 150mm shall be welded black steel
pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S.
Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS
sheet for pipes of 400 mm dia and above.
32 mm dia pipe
129
-
-
(DSR No. 16.2.14) Supplying, laying/ fixing, testing and commissioning of following
nominal sizes of chilled water piping inside the building (with
necessary clamps, vibration isolators and fittings but excluding
valves, strainers, gauges etc.) duly insulated with following closed
cell elastometric nitrile rubber of minimum 45 Kg / cu m density,
thermal conductivity 0.037 W/MK or better at 20 deg mean
temperature class 'O' insulation applied by suitable adhesive
complete including repairing of damage to building etc. as per
specifications and as required complete in all respect.
Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as
per IS : 1239 and pipes size above 150mm shall be welded black steel
pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S.
Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS
sheet for pipes of 400 mm dia and above.
25 mm dia pipe
172
-
-
(DSR No. 16.7.1.7) BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as specified
50mm Dia
4
-
-
(DSR No. 16.7.1.8) BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as specified
40mm Dia
10
-
-
(DSR No. 16.7.4.7) Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.
50mm Dia
2
-
-
(DSR No. 16.7.4.8) Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.
40mm Dia
5
-
-
(DSR No. 16.8) Providing and fixing in position the industrial type pressure
gauges with gun metal / brass valves complete as required
17
-
-
(DSR No. 16.9) Providing & fixing in position the mercury in glass industrial type thermometers.
34
-
-
(DSR No. 16.12.1.1) Rectangular / Square Ducting Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Main box type duct damper , splitter & vanes etc .shall be apart of ducting no extra cost shall bepaid for the same . 24 G (0.63 mm)
740
-
-
(DSR No. 16.12.1.2) Rectangular / Square Ducting Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Main box type duct damper , splitter & vanes etc .shall be apart of ducting no extra cost shall bepaid for the same .
22 G (0.80 mm)
265
-
-
(DSR No. 16.12.1.3) Rectangular / Square Ducting Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Main box type duct damper , splitter & vanes etc .shall be apart of ducting no extra cost shall bepaid for the same . 20 G (1.00 mm)
10
-
-
(DSR No. 16.12.1.4) Rectangular / Square Ducting Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Main box type duct damper , splitter & vanes etc .shall be apart of ducting no extra cost shall bepaid for the same .
18 G (1.25 mm)
25
-
-
(DSR No. 16.12.2.1) Rectangular / Square Ducting (SITE FABRICATED)
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required
Main box type duct damper , splitter & vanes etc .shall be apart of ducting no extra cost shall bepaid for the same .
24 G (0.63 mm)
185
-
-
(DSR No. 16.12.2.2) Rectangular / Square Ducting (SITE FABRICATED)
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required
Main box type duct damper , splitter & vanes etc .shall be apart of ducting no extra cost shall bepaid for the same . 22 G (0.80 mm)
66
-
-
(DSR No. 16.12.2.3) Rectangular / Square Ducting (SITE FABRICATED)
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required
Main box type duct damper , splitter & vanes etc .shall be apart of ducting no extra cost shall bepaid for the same .
20 G (1.00 mm)
10
-
-
(DSR No. 16.12.2.4) Rectangular / Square Ducting (SITE FABRICATED)
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required
Main box type duct damper , splitter & vanes etc .shall be apart of ducting no extra cost shall bepaid for the same .
18 G (1.25 mm)
60
-
-
(DSR No. 16.13) Supply, installation, testing and commissioning of GI volume
control duct damper complete with neoprene rubber gaskets,
nuts, bolts, screws linkages, flanges etc, as per specifications.
5
-
-
(DSR No. 16.21) Supply and fixing of acoustic lining of supply air duct and plenum
with 25 mm thick resin bonded glass wool having density of 32
kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600
mm centre to centre covered with Reinforced Plastic tissue paper
and 0.5 mm thick perforated aluminum sheet fixed to inside
surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX
compound etc. complete as required and as per specifications.
450
-
-
(DSR No. 17.2.1.2) Supplying, installation, testing and commissioning of micro
processor based intelligent addressable main fire alarm
panel, central processing unit with the following loop
modules and capable of supporting not less than 240 devices
(including detectors) and minimum 120 detectors per loop
and loop length up to 2 km, network communication card,
minimum 320 character graphics/ LCD display with touch
screen or other keypad and minimum 4000 events history log
in the non volatile memory (EPROM), power supply unit (230
± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed
maintenance free batteries with automatic charger. The
panel shall have facility to connect printer to printout log and
facility to have seamless integration with analog/digital voice
evacuation system (which is part of the schedule of work
under SH: PA System) and shall be complete with all
accessories . The panel shall be compatible for IBMS system
with open protocol BACnet/ Modbus over IP complete as per
specifications. (2 Loop Panel)
1
-
-
(DSR No. 17.2.4)Supplying, installation, testing & commissioning of intelligent
analog addressable photothermal detector complete with
mounting base complete as required.
120
-
-
(DSR No. 17.2.5) Supplying, installation, testing & commissioning of response
indicator on surface/recessed MS Box having two LED,
metallic cover complete with all connections etc as required.
45
-
-
(DSR No. 17.2.6) Supplying, installation, testing & commisssioning of
intelligent addressable programmable sounder complete as
required.
12
-
-
(DSR No. 17.2.7) Supplying, installation, testing & commissioning of fault
isolator complete with base as required.
6
-
-
(DSR No. 17.2.13) Supplying, installation, testing & commissioning of intelligentaddressable duct detector including suitable Photo detectorcomplete with base as required.
6
-
-
(DSR No. 17.2.17) Supplying, installation, testing & commissioning of fire fighter
telephone handset complete as required.
12
-
-
(DSR No. 17.2.19) Supplying, installation, testing & commissioning of fire fighter
phone jack complete as required.
12
-
-
(DSR No. 17.3.1) Supplying, installation, testing & commissioning of 6 zone,
voice alarm controller with USB, MP3 player (including 6 zone
button paging station) with seamless integration facility with
main fire alarm panel for voice evacuation complete as
required.
1
-
-
(DSR No. 17.3.2) Supplying, installation, testing & commissioning of 1.5/3/6W
ceiling speaker complete as required.
90
-
-
(DSR No. 17.3.7) Supplying, installation, testing & commissioning of digital
audio amplifier 75 Watt, 25V rms operating at 240 Volt AC
Supply complete as required.
1
-
-
(DSR No. 17.5.3.2) Supplying and drawing of cable Fire Retardant PVC insulated
copper conductor cable in the existing surface / recessed
steel conduit of following pairs, cores and size including
connections and interconnections etc. as required.speaker cable Two pair, 2-core, 1.5 sqmm
1000
-
-
Electrical NON DSR Item
-
-
-
(Non DSR No. NSR-1) DOUBLE SKINNED CEILING SUSPENDED AIR HANDLING UNITS Dismentling, Re-Installation, testing and commissioning of Existing factory fabricated Double Skinned Chilled Water Air- handling unit Ceiling Suspended type as Per requirement. Existing CS AHU- 4x4700 CFM/11.75 TR
4
-
-
(Non DSR No. NSR-2) DOUBLE SKINNED CEILING SUSPENDED AIR HANDLING UNITS
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Ceiling Suspended type, fabricated out of extruded aluminium section with 0.63mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.63 mm plain Galvanised steel sheet inside with DWDI blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 48 mm thick & 48 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only The complete AHU shall confirm to standard specification.
The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
CS AHU-2000 CFM/ 4RD/ 2 HP/ 50MM Static Pr.
2
-
-
(Non DSR No. NSR-2) DOUBLE SKINNED CEILING SUSPENDED AIR HANDLING UNITS
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Ceiling Suspended type, fabricated out of extruded aluminium section with 0.63mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.63 mm plain Galvanised steel sheet inside with DWDI blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 48 mm thick & 48 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only The complete AHU shall confirm to standard specification.
The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
CS AHU-2500 CFM/ 4RD/ 2 HP/ 50MM Static Pr.
1
-
-
(Non DSR No. NSR-2) DOUBLE SKINNED CEILING SUSPENDED AIR HANDLING UNITS
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Ceiling Suspended type, fabricated out of extruded aluminium section with 0.63mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.63 mm plain Galvanised steel sheet inside with DWDI blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 48 mm thick & 48 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only The complete AHU shall confirm to standard specification.
The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
CS AHU-3000 CFM/ 4RD/ 2 HP/ 50MM Static Pr.
1
-
-
(Non DSR No. NSR-2) DOUBLE SKINNED CEILING SUSPENDED AIR HANDLING UNITS
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Ceiling Suspended type, fabricated out of extruded aluminium section with 0.63mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.63 mm plain Galvanised steel sheet inside with DWDI blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 48 mm thick & 48 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only The complete AHU shall confirm to standard specification.
The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
CS AHU-3500 CFM/ 4RD/ 3 HP/ 50MM Static Pr.
1
-
-
(Non DSR No. NSR-2) DOUBLE SKINNED CEILING SUSPENDED AIR HANDLING UNITS
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Ceiling Suspended type, fabricated out of extruded aluminium section with 0.63mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.63 mm plain Galvanised steel sheet inside with DWDI blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 48 mm thick & 48 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only The complete AHU shall confirm to standard specification.
The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
CS AHU-4500 CFM/ 4RD/ 3 HP/ 50MM Static Pr.
4
-
-
(Non DSR No. NSR-2) DOUBLE SKINNED CEILING SUSPENDED AIR HANDLING UNITS
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Ceiling Suspended type, fabricated out of extruded aluminium section with 0.63mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.63 mm plain Galvanised steel sheet inside with DWDI blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 48 mm thick & 48 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only The complete AHU shall confirm to standard specification.
The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
CS AHU-4700 CFM/ 4RD/ 5 HP/ 50MM Static Pr.
1
-
-
(Non DSR No. NSR-2) DOUBLE SKINNED CEILING SUSPENDED AIR HANDLING UNITS
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Ceiling Suspended type, fabricated out of extruded aluminium section with 0.63mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.63 mm plain Galvanised steel sheet inside with DWDI blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 48 mm thick & 48 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only The complete AHU shall confirm to standard specification.
The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
CS AHU-5200 CFM/ 4RD/ 5 HP/ 50MM Static Pr.
1
-
-
(Non DSR No. NSR-3.1) FAN COIL UNITS
Supply, Installation, Testing and Commissioning of Ceiling suspended ductable fan coil units complete with casing, filter box complete with synthetic fiber filters, cooling coil, fans, 3-speed motors, extended drain pan, flexible connection, drain pipe connection complete with following equipment as per tender drawings, and specifications.
(a) Copper flexible connection complete with set of ball valves with and without strainer.
(b) Air tight, Water & Fire proof single layered canvass cloth complete with flanges in both side for connection to duct collar and fan coil unit.
(c)Electrical and control cabling for proper connection from the 15 amps outlet to connector box, valve etc. as well as connection of thermostat.
(d)Controls for FCUs comprising of thermostat, Two way motorised control valve, balancing valve control wiring.
(e) Supply and Return air grille & necessary Ducting for Connection
Fan coil units 2.0 TR FCU/800CFM/3RD
FAN COIL UNITS
Supply, Installation, Testing and Commissioning of Ceiling suspended ductable fan coil units complete with casing, filter box complete with synthetic fiber filters, cooling coil, fans, 3-speed motors, extended drain pan, flexible connection, drain pipe connection complete with following equipment as per tender drawings, and specifications.
(a) Copper flexible connection complete with set of ball valves with and without strainer.
(b) Air tight, Water & Fire proof single layered canvass cloth complete with flanges in both side for connection to duct collar and fan coil unit.
(c)Electrical and control cabling for proper connection from the 15 amps outlet to connector box, valve etc. as well as connection of thermostat.
(d)Controls for FCUs comprising of thermostat, Two way motorised control valve, balancing valve control wiring.
(e) Supply and Return air grille & necessary Ducting for Connection
Fan coil units 2.0 TR FCU/800CFM/3RD
19
-
-
(Non DSR No. NSR- 3.2) FAN COIL UNITS
Supply, Installation, Testing and Commissioning of Ceiling suspended ductable fan coil units complete with casing, filter box complete with synthetic fiber filters, cooling coil, fans, 3-speed motors, extended drain pan, flexible connection, drain pipe connection complete with following equipment as per tender drawings, and specifications.
(a) Copper flexible connection complete with set of ball valves with and without strainer.
(b) Air tight, Water & Fire proof single layered canvass cloth complete with flanges in both side for connection to duct collar and fan coil unit.
(c)Electrical and control cabling for proper connection from the 15 amps outlet to connector box, valve etc. as well as connection of thermostat.
(d)Controls for FCUs comprising of thermostat, Two way motorised control valve, balancing valve control wiring.
(e) Supply and Return air 3.0 TR FCU/1200CFM/3RD
9
-
-
(Non DSR No. NSR-4.1) CEILING MOUNTED TREATED FRESH AIR UNIT
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Ceiling mounted Type Treated Fresh Air Unit fabricated out of extruded aluminum section with 0.63mm pre-plasticized / pre-coated Galvanized steel sheet outside & 0.63 mm plain Galvanized steel sheet inside with backward curve blower or plug fan aero foil design, blower section or plug type and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 Row cooling coil made of Aluminum finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor and direct driven or belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 48mm thick & 48 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminum extruded section only The complete AHU shall confirm to standard specification. The face velocity across cooling coil shall be limited to 152 MPM max , Fan Outlet Velocity Not to Exceed 8.5 m/s , Sound Level 65 Db at 1Mt & fan RPM not to exceed 1000RPM. The AHU price shall include the vibration isolator arrangement for hanging with required supports
The face velocity across cooling coil shall be limited to 152 MPM maxim. The capacity of Air-handlers shall be as follows: FM-TFA-LB-03 &04
1x1000 CFM/8RD/50MMStatic/ 1.1 kw
6
-
-
(Non DSR No. NSR-6.3) Supply, installation, testing and commissioning of following PN 16 rating valves ,Strainers ,NRV etc complete with companion flanges, nuts,bolts, gaskets etc.as specified.confirming to specification
Ball Valve
32mm Dia
20
-
-
(Non DSR No. NSR-6.4) Supply, installation, testing and commissioning of following PN 16 rating valves ,Strainers ,NRV etc complete with companion flanges, nuts,bolts, gaskets etc.as specified.confirming to specification
Balancing Valve
50mm Dia
2
-
-
(Non DSR No. NSR-6.5) Supply, installation, testing and commissioning of following PN 16 rating valves ,Strainers ,NRV etc complete with companion flanges, nuts,bolts, gaskets etc.as specified.confirming to specification
Balancing Valve
40mm Dia
5
-
-
(Non DSR No. NSR-6.6) Supply, installation, testing and commissioning of following PN 16 rating valves ,Strainers ,NRV etc complete with companion flanges, nuts,bolts, gaskets etc.as specified.confirming to specification
Balancing Valve
32mm Dia
10
-
-
(Non DSR No. NSR-6.9) Supply, installation, testing and commissioning of following PN 16 rating valves ,Strainers ,NRV etc complete with companion flanges, nuts,bolts, gaskets etc.as specified.confirming to specification
"Y" type strainer
32mm Dia
10
-
-
(Non DSR No. NSR-7.1) Supply, installation, testing & commissioning of motorised 2 way Modulating Valve complete with electrical actuator,heavy duty PN16 cast iron body with nylon coated S.G. iron disk,water sealant lining, stainless steel shaft, control lever with thermostat control wiring,accessories if any like transformer etc.position confirming to standard specification for the following sizes
40 mm Dia
2
-
-
(Non DSR No. NSR-7.2) Supply, installation, testing & commissioning of motorised 2 way Modulating Valve complete with electrical actuator,heavy duty PN16 cast iron body with nylon coated S.G. iron disk,water sealant lining, stainless steel shaft, control lever with thermostat control wiring,accessories if any like transformer etc.position confirming to standard specification for the following sizes
32 mm Dia
5
-
-
(Non DSR No. NSR-7.3) Supply, installation, testing & commissioning of motorised 2 way Modulating Valve complete with electrical actuator,heavy duty PN16 cast iron body with nylon coated S.G. iron disk,water sealant lining, stainless steel shaft, control lever with thermostat control wiring,accessories if any like transformer etc.position confirming to standard specification for the following sizes
25 mm Dia
10
-
-
(Non DSR No. NSR-7.4) Supply, installation, testing & commissioning of motorised 2 way Modulating Valve complete with electrical actuator,heavy duty PN16 cast iron body with nylon coated S.G. iron disk,water sealant lining, stainless steel shaft, control lever with thermostat control wiring,accessories if any like transformer etc.position confirming to standard specification for the following sizes
Display Thermostate
18
-
-
(Non DSR No. NSR-8) Supply, Installation, Testing, & Commissioning of Automatic air vent with ball valve in brass construction complete with nipples, union etc. as required at all high points in the pipe lines. The valve shall be such as to have non-return valve as integral part of the vent. 15 mm dia auto air vent valve
34
-
-
(Non DSR No. NSR-9.1) Supply, installation , testing & commissioning of condensate drain water piping of GI 'Medium' class complete with Medium Class fittings like elbows, tees, reducers bends, MS flanges, supports, welding, painting etc. as required conforming
25 mm dia O.D
179
-
-
(Non DSR No. NSR-9.2) Supply, installation , testing & commissioning of condensate drain water piping of GI 'Medium' class complete with Medium Class fittings like elbows, tees, reducers bends, MS flanges, supports, welding, painting etc. as required conforming
32 mm dia O.D
68
-
-
(Non DSR No. NSR-9.3) Supply, installation , testing & commissioning of condensate drain water piping of GI 'Medium' class complete with Medium Class fittings like elbows, tees, reducers bends, MS flanges, supports, welding, painting etc. as required conforming
40 mm dia O.D
23
-
-
(Non DSR No. NSR-10) Supply, Installation, Testing & Commissioning of 25mm diameter Drain Valves in dirt legs complete with nipples as per specifications.
17
-
-
(Non DSR No. NSR-11) PROPELLER FANS
Supply, installation, testing & commissioning of ceiling suspended Propellar fans complete with bird screen, rain guard, metal clad MCB & starter ,5m length copper cable, earthing wire all compete as required of following capacities & as per shop drawing mentioned.
225 mm Dia
1
-
-
(Non DSR No. NSR-12) INLINE FAN Supply, installation, testing and commissioning of ceiling suspended Inline fans complete with bird screen,speed regulator, rain guard, metal clad MCB & starter panel ,5m length copper cable, earthing wire all compete as required of following capacities and shop drawing mentioned.
Note:- All inline fans to be single phase supply up to 1500CFM with 3 speed regulators etc.
1000 CFM ,25mm Static Pressure
6
-
-
(Non DSR No. NSR-13) VANE AXIAL FLOW FANS IN CASE OF FIRE MODE VENTILATION(EXHAUST AIR )
Supply, installation, shifting, loading, unloading, testing & commissioning of Floor mounted/Ceiling suspended, double flanged, long casing (motor should completly accomodated in Fan casing) Vane axial flow fans (Fire Rated) AMCA Certified, with adjustable pitch blade & angle, bird screen at fan outlet , MS/GI casing, cast aluminium alloy impeller complete with TEFC Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, 4/6/8 pole, three Phase, A.C supply class "H" insulation with support, Phase& Motor rated Value IP55 . Motor shall be Thermally Rated for 250 deg C for 2 Hours should be certified as per BSEN12101-3:2002 standard & direct driven for smoke extraction fans.
With the Approx. Motor HP as given below (to be supported with Documentary evidence at the time of Technical Bid.) The rate shall include supply and fitting of vibration isolators ( spring & rubber pads) complete as per specifications and drawings including fitting of accessories like Fire retardant canvass connection painting,gravity louver,bird screen etc. as required at site of work. Including all type of civil work like cutting/holes/chasing/cut out in brick wall etc Sound attenuator shall be as specified with following characteristics:
a) Length not exceeding 1D (Fan Dia.)
b) Pressure drop through sound attenuator shall not exceed 8mm WC
Note 1. Outlet Velocity for normal mode fans not to exceed 14.0 MPS 1. Outlet Velocity for Fire mode fans not to exceed 18.0 MPS 2. Total efficiency of normal fans shall not less than 60%
3. Fan motor shall meet IE2 standard as per IS-12615
4. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:
5. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm.
6. In case of attenuator , calculation of reduction of sound level with insertion loss of attenuator is to be submitted.
FOR ALL FLOOR'S
Fan Capacity = 8500 CFM
Static Pressure = 30 mm Wg
Motor Rating = Not Exceed 3.7 KW
Noise level = not exceed 70 db. at 3 meter distance
6
-
-
(Non DSR No. NSR-14) TUBE AXIAL FLOW FANS FOR (FRESH AIR FAN )
Supply, installation, testing & commissioning of Floor mounted/ceiling suspended double flanged, long casing (motor should completly accomodated in Fan casing) axial flow fans AMCA Certified, with adjustable pitch blade & angle ,bird screen at fan inlet, MS/GI casing, cast aluminium alloy impeller complete with TEFC Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, 4/6/8pole, three Phase, A.C supply class "F" insulation with support, Phase& Motor rated Value IP55 .
with the Approx. Motor HP as given below ( to be supported with Documentary evidence at the time of Technical Bid.) The rate shall include supply and fitting of vibration isolators ( spring & rubber pads) complete as per specifications and drawings including fitting of accessories like Fire retardant canvass connection painting,gravity louver,bird screen etc. as required at site of work. Including all type of civil work like cutting/holes/chasing/cut out in brick wall etc Note 1. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. 2. Fan motor shall meet IE2 standard as per IS-12615
3. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm.
FOR ALL FLOOR'S
Fan Capacity = 8500 CFM
Static Pressure = 30 mm Wg
Motor Rating = Not Exceed 3.7 KW
Noise level = not exceed 70 db. at 3 meter distance
6
-
-
(Non DSR No. NSR-15.1) Supply, installation, testing and commissioning of 50miron Powder coated Aluminium extruded Grille for supply and return air as per specification & the sizes will be as per the drawing 150MM High Continous Grille
15
-
-
(Non DSR No. NSR-15.2) Supply, installation, testing and commissioning of 50miron Powder coated Aluminium extruded Grille for supply and return air as per specification & the sizes will be as per the drawing
Diffuser
80
-
-
(Non DSR No. NSR-16) Supply, installation, testing and commissioning of 50 micron powder coated "Aluminium" collar volume control dampers with key operated of black painted in supply air registers / terminals.
30
-
-
(Non DSR No. NSR-17) Supply, installation, testing and commissioning of 50 micron powder coated "Aluminium fresh air louvers with gravity louvers & bird screen.
5
-
-
(Non DSR No. NSR-18) DUCT INSULATION Supply & Installation of Thermal Insulation on Duct using Closed Cell Anti Microbial and Anti Fungal Class O Nitrile Rubber Elastomeric Insulation of Density 40 - 60 Kg/m3, Thermal Conductivity of 0.035 W/mk at 200 Celsius Mean Temp. and Mu≥10000 with 200+/-20 gsm using Rubber based Adhesive in a blend of solvents complete as per Specifications
12 mm thick Class O Nitrile Rubber Insulation
1125
-
-
(Non DSR No. NSR-20) Supply, installation, testing and commissioning of Insulation on valves with 19mm Nitrile Rubber Insulation and shall be as per standard specification.
Insulation for Valves
12
-
-
(Non DSR No. NSR-21.1) Supply,installation, testing and commissioning of Insulation of condensate drain water piping with 13 mm Nitrile Rubber Insulation and shall be as per standard specification.
25 mm dia pipe
179
-
-
(Non DSR No. NSR-21.2) Supply,installation, testing and commissioning of Insulation of condensate drain water piping with 13 mm Nitrile Rubber Insulation and shall be as per standard specification.
32 mm dia pipe
68
-
-
(Non DSR No. NSR-21.3) Supply,installation, testing and commissioning of Insulation of condensate drain water piping with 13 mm Nitrile Rubber Insulation and shall be as per standard specification.
40 mm dia pipe
23
-
-
(Non DSR No. NSR-22) ROOF INSULATION
Supply & Installation of Roof Thermal Insulation exposed to sunlight using Closed Cell Anti Microbial and Anti Fungal Class O Nitrile Rubber Elastomeric Insulation of Density 40 - 60 Kg/m3, Thermal Conductivity of 0.035 W/mk at 200 Celcius Mean Temp. and Mu≥10000 and with Chemically treated Factory Laminated Woven Fibre Glass Cloth with 200+/-20 gsm using manufacturer's recommended Rubber based Adhesive in a blend of solvents complete as per Specifications
25 mm thick Class O Nitrile Rubber Insulation with GC cloth
245
-
-
(Non DSR No. NSR-23.1) CUBICAL PANEL BOARD Supply, Installation, Testing and commissioning of wall mounted panels near the each AHU Unit constructed out of 2mm thick CRCA sheet duly powder coated as per specifications. The panel shall have hinged door with on-off interlocks. The panel shall be complete with incoming MCCB, suitable bus bars of aluminum construction, bus links complete with Star delta starter with 'hands", "off", automatic modeselection switch, ammeter for each motor, timer, Auto Manual switch, remote start/stop contacts, earthing connector etc.,as required complete as per specifications.
Panel should have following:
Indicating lights LED for incommer and outgoing
Ammeter with selector switch
Volt meter with selector switch with fuse
Panel With following Capacities:
For AHU & AXIAL FAN ( 1 x 5HP Fan Motor) 16A TP MPCB of suitable rating with 5 HP DOL Stater PANEL having overload relay in built single phase prevention, start/ stop push buttons, phase indication lights with control MCB, on / off / trip indication lights with control MCB, digital ammeter with single CT & Voltmeter with selector switch, 2C/O Control Relay with Control Thermostate & Suitable VFD Fan Louver, Auto Manual Selector switch. MPCB shall be of 10KA Imported VFD for Axial Fan Motor with IP 20 enclosures, Mains disconnect, Built-in Harmonic Filters, EMC Filters (Electromagnetic Compatibility Filters), 3 PID Controlers, Automatic Energy Optimization / Load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications. The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc.
13
-
-
(Non DSR No. NSR-23.2) CUBICAL PANEL BOARD Supply, Installation, Testing and commissioning of wall mounted panels near the each AHU Unit constructed out of 2mm thick CRCA sheet duly powder coated as per specifications. The panel shall have hinged door with on-off interlocks. The panel shall be complete with incoming MCCB, suitable bus bars of aluminum construction, bus links complete with Star delta starter with 'hands", "off", automatic modeselection switch, ammeter for each motor, timer, Auto Manual switch, remote start/stop contacts, earthing connector etc.,as required complete as per specifications.
Panel should have following:
Indicating lights LED for incommer and outgoing
Ammeter with selector switch
Volt meter with selector switch with fuse
Panel With following Capacities:
For AHU ( 1 x 3HP Fan Motor)
10A TP MPCB of suitable rating with 3 HP DOL Stater PANEL having overload relay in built single phase prevention, start/ stop push buttons, phase indication lights with control MCB, on / off / trip indication lights with control MCB, digital ammeter with single CT & Voltmeter with selector switch, 2C/O Control Relay with Control Thermostate & Suitable VFD Fan Louver, Auto Manual Selector switch. MPCB shall be of 10KA Imported VFD for Axial Fan Motor with IP 20 enclosures, Mains disconnect, Built-in Harmonic Filters, EMC Filters (Electromagnetic Compatibility Filters), 3 PID Controlers, Automatic Energy Optimization / Load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications. The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc.
6
-
-
(Non DSR No. NSR-23.3) CUBICAL PANEL BOARD Supply, Installation, Testing and commissioning of wall mounted panels near the each AHU Unit constructed out of 2mm thick CRCA sheet duly powder coated as per specifications. The panel shall have hinged door with on-off interlocks. The panel shall be complete with incoming MCCB, suitable bus bars of aluminum construction, bus links complete with Star delta starter with 'hands", "off", automatic modeselection switch, ammeter for each motor, timer, Auto Manual switch, remote start/stop contacts, earthing connector etc.,as required complete as per specifications.
Panel should have following:
Indicating lights LED for incommer and outgoing
Ammeter with selector switch
Volt meter with selector switch with fuse
Panel With following Capacities:
For AHU ( 1 x 2HP Fan Motor)
6A TP MPCB of suitable rating with 2 HP DOL Stater PANEL having overload relay in built single phase prevention, start/ stop push buttons, phase indication lights with control MCB, on / off / trip indication lights with control MCB, digital ammeter with single CT & Voltmeter with selector switch, 2C/O Control Relay with Control Thermostate & Suitable VFD Fan Louver, Auto Manual Selector switch. MPCB shall be of 10KA Imported VFD for Axial Fan Motor with IP 20 enclosures, Mains disconnect, Built-in Harmonic Filters, EMC Filters (Electromagnetic Compatibility Filters), 3 PID Controlers, Automatic Energy Optimization / Load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications. The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. Controls & interlocking of accessories for above as required.
10
-
-
(Non DSR No. NSR-24.1) POWER & CONTROL CABLING
Supplying, laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV -Cross Linked Poly Ethelene armoured aluminium conductor cables conforming to relevant latest amended Indian Standards laid over MS supports & Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.
MAKE : KEI/POLYCAB
4C x 2.5 sqmm Cu Ar. PVC Cable
350
-
-
(Non DSR No. NSR-24.2) POWER & CONTROL CABLING
Supplying, laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV -Cross Linked Poly Ethelene armoured aluminium conductor cables conforming to relevant latest amended Indian Standards laid over MS supports & Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.
MAKE : KEI/POLYCAB
4C x 4.0 sqmm Cu Ar. PVC Cable
175
-
-
(Non DSR No. NSR-24.3) POWER & CONTROL CABLING
Supplying, laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV -Cross Linked Poly Ethelene armoured aluminium conductor cables conforming to relevant latest amended Indian Standards laid over MS supports & Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.
MAKE : KEI/POLYCAB
4C x 6.0 sqmm Cu Ar. PVC Cable
225
-
-
(Non DSR No. NSR-24.4) POWER & CONTROL CABLING
Supplying, laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV -Cross Linked Poly Ethelene armoured aluminium conductor cables conforming to relevant latest amended Indian Standards laid over MS supports & Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.
MAKE : KEI/POLYCAB
4C x 10 Sq. mm Aluminium Cable
95
-
-
(Non DSR No. NSR-24.5) Control Cabling 2C x 2.5 Sq. mm Aluminium Cable
70
-
-
(Non DSR No. NSR-24.6) Earthing Strip / Wires.
Supply & laying of 8 SWG earth lead including soldering etc.as required.
Subhead- VII: INTERNAL ELECTRICAL WORKS
1050
-
-
(Non DSR No. NSR-25) Supplying and fixing 63 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Triple pole and neutral
12
-
-
(Non DSR No. NSR-26.1) Supply, installation, testing and commissioning of pre-wired, LED fitting of all types, complete with all accessories and lamp etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
36W 2 x 2 ft. recess mounted LED light
384
-
-
(Non DSR No. NSR-26.2) Supply, installation, testing and commissioning of pre-wired, LED fitting of all types, complete with all accessories and lamp etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
18W recess mounted circular LED Down lighter.
580
-
-
(Non DSR No. NSR-26.3) Supply, installation, testing and commissioning of pre-wired, LED fitting of all types, complete with all accessories and lamp etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
20W wall mounted LED Batten light.
60
-
-
(Non DSR No. NSR-26.4) Supply, installation, testing and commissioning of pre-wired, LED fitting of all types, complete with all accessories and lamp etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
LED exit signage of Box size in mm 325x425x365.
12
-
-
(Non DSR No. NSR-201) Supplying, installing, testing and commissioning of Cat 6 , Tool less Information outlet for Data,Voice,CCTV,Wi-Fi, & Access Control. Cat6 U/UTP built in crimping hands-free, minimum 5 times reconnection possibilities. LCS2 Toolless RJ45 Information outlet where insertion test (in & out) must be 2500 times (I/O) along with front side Label holded and transparent shutter for projection Arteor category white in colour, including front plate and anodised GI box in concealed manner of adequate sizes,including all fixing accessories.
220
-
-
(Non DSR No. NSR-202) Supply, installation, testing & commissioning of 30 Pair MDF Box metal, wall mount, indoor type with back mount frame & disconnection modules complete as required with accessories as per ADC Krone.
6
-
-
(Non DSR No. NSR-203) Supply, installation, testing & commissioning of 200 Pair MDF Box metal, wall mount, indoor type with back mount frame & disconnection modules complete as required with accessories as per ADC Krone.
1
-
-
(Non DSR No. NSR-204) Supply, laying, testing & commissioning of following pairs high conductivity solid annealed bare copper Telephone Cable with high density polyethylene insulation, paired, polyester and sheathed with high oxygen index, fire retardant, PVC compound, grey outer sheath, armoured complete as required:
20 pair x 0.5mm
600
-
-
(Non DSR No. NSR-205) Supply, laying, testing & commissioning of following pairs high conductivity solid annealed bare copper Telephone Cable with high density polyethylene insulation, paired, polyester and sheathed with high oxygen index, fire retardant, PVC compound, grey outer sheath, armoured complete as required:
100 pair x 0.5mm
30
-
-
(Non DSR No. NSR-206) Supply, installation, testing & commissioning of Cat 6, 24 port loaded rack mountable UTP Patch Panel Tolless. Panel supplied with quick mounting. All enclosures or cabinets general assembly panels ensure automatic grounding of each connector fitted with rear cable guide to hold cables during maintenance. Fitted with 4 units of 6 LCS2 RJ45 connectors cat 5e with fast connection thanks to integrated crimping, with 568 A/B labelling. Supplied with colour labels numbered from 1 to 24 conform to standards ISO/IEC 11801, Ed.2.0, EN 50173-2 and EIA/TIA 568-C, 19"panel - 1U. Measurement of components & links, validated by independent 3P Third Party Testing & ETL, have highlighted its triple performance. All products are RoHS copliance. All products are UL approved.
12
-
-
(Non DSR No. NSR-207) Supplying, installing, testing and commissioning of following length of Cat - 6 patch cord. 4 Feet : CAT6 UTP 23 AWG Patch Cord - 1 mtr - Rack End. Factory crimped LCS2 Patch cord in Blue colour.
220
-
-
(Non DSR No. NSR-208) Supplying, installing, testing and commissioning of following length of Cat - 6 patch cord. 7 Feet : CAT6 UTP 23 AWG Patch Cord - 2 mtr - User End.Factory crimped LCS2 Patch cord in Blue colour.
220
-
-
(Non DSR No. NSR-209) Supplying, laying and fixing of 6 core outdoor OM3 Multimode Optical Fiber of size 50/125μm. Indoor/Outdoor Universal loose tube Green jacket through existing GI/HDPE/ Hume pipe or on cable trays inside the cable duct including all necessary fixing accessories e.g. cable ties,hardware etc.
400
-
-
(Non DSR No. NSR-210) Supplying, installing, testing and commissioning of 06 port LCS2 Adapter plate, loaded with 6 nos. of duplex LC unit for 6 multi mode fibers of size 50/125 μm .Adapters to be compatible to fit in 19" U/UTP 24 port modular patch panel or 24 port LIU.
6
-
-
(Non DSR No. NSR-211) Supplying, installing, testing and commissioning of 10 GB -50/125μm OM3 LC Pigtails MM 50/125mn.
72
-
-
(Non DSR No. NSR-212) Supplying, installing, testing and commissioning of MM Patch Cord -LC/LC Duplex Cords - 2 mtrs.
16
-
-
(Non DSR No. NSR-213) Supplying, installing, testing and commissioning of Blanking plate for LIU and Modular Patch Panel (Size 6 X RJ45 Blanking plate). For 19" Panel - Black in colour).
18
-
-
(Non DSR No. NSR-214) Supplying, installing, testing and commissioning of Cabinet. Size 2026 X 800 X 800 mm (HXWXD) following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 150, CRCA 'D' Grade thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm Toughened Tinted Glass Door,Injected one piece polyurethane gasket on frame, Accessories: Cooling Fan (230V A/C 90 CFM) - 4 Nos, Cable Manager Metal- 4 Nos,PDU 230VAC - 1 No (12 nos. 6A/16A sockets with plugs 6A/16A - 1/1pc & MCB 16A/32A -0/1 Pc), cable channel 100mm wide 42U- 2 Nos,Heavy Duty Stationary shelf M6 screws,washer,cage nuts (nickel coated))3 Nos. Earthling Strips 150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels (without Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc complete as required
1
-
-
(Non DSR No. NSR-215) Supply & Fixing of 15U Wall Mount Rack with accessories
6
-
-
(Non DSR No. NSR-216) Supply, Installation, testing and commissioning of 1 U Horizontal Wire Manager 60mm depth (Front Side)
20
-
-
(Non DSR No. NSR-217) Supply, Installation, testing and commissioning Patch Cord Lable for Rack side (Pk of 2500 Pc.)
2
-
-
(Non DSR No. NSR-218) Supply, Installation, testing and commissioning Velcro's Roll (15 Mtr. Per Roll)
10
-
-
(Non DSR No. NSR-219) supply, Installation, Testing & Commissioning of Switch with at least 24 X SFP+ 10G Ports and additional 6 X QSFP+ 40G Ports, with non-blocking architecture, 250K+ MAC table , Switch should support ACL, QOS, OSPF, 802.1x, VXLAN, ONIE / OpenFlow v1.3, Data Center Bridging Exchange (DCBX) 802.1Qau, 802.1Qbb and 802.1Qaz, Certification: CE, FCC, BSMI, CB and UL. Should support two AC/DC hot-swappable internal power modules for 1+1 redundancy and load sharing. OEM should available in Gartner Magic Quadrant for Wired and Wireless LAN Access Infrastructure Report from latest last three consecutive year.
1
-
-
(Non DSR No. NSR-220) Supply, Installation, Testing & Commissioning of Switch should have 24 *10/100/1000 base T Access ports with 4 1/10G SFP+port , 2 x 10GBASE-T ports with 168 Gbps backplane 125 mpps forwording rate on line rate, supporting reduendent power supply, 9 units stack with 80 Gbps bandwidth, 16000 mac address , Static Routing , RIPng with Ethernet Ring Protection Switching (ERPS) , 4000 vlans support , Embedded 6 kV surge protection on all Gigabit Ethernet ports, Switch should have Console , Management and USB Ports (all three) as complete as required.
10
-
-
(Non DSR No. NSR-221) Supply, Installation, Testing & Commissioning of Switch should have 24 *10/100/1000 base T POE+ (Support total PB: 740W) Access ports with 4 1/10G SFP+port , 2 x 10GBASE-T ports with 168 Gbps backplane 125 mpps forwording rate on line rate, supporting reduendent power supply, 9 units stack with 80 Gbps bandwidth, 16000 mac address , Static Routing , RIPng with Ethernet Ring Protection Switching (ERPS) , 4000 vlans support , Embedded 6 kV surge protection on all Gigabit Ethernet ports, Switch should have Console , Management and USB Ports (all three) as complete as required.
2
-
-
(Non DSR No. NSR-222) supply, Installation, Testing & Commissioning of 10GBASE-LR SFP+ Transceiver, Fiber Module should be Hot Pluggable, MSA Compliant and RoHS Compliant, Module should support 10KM Distance, Fiber module should be same of Switch OEM,
30
-
-
(Non DSR No. NSR-223) Supply Installation, Testing and Commissioning of Server Based EPABX Fully Computerized IP System, SIP Compliant. Multi slot 19: U Rack Mountable 2U Rack Expandable upto 700 Ports Presently Configuration as Below:
CO Line 10 Nos.
PRI(30 Channel) 2 Nos.
Digital Extension Circuits 16 Nos.
Analog Extension Circuits 200 Nos.
Integrated Viocemail System 1 Nos.
1
-
-
(Non DSR No. NSR-224) Supply Installation, Testing and Commissioning of Analog Speaker Phone with backlight and 4 memorable Key.
200
-
-
(Non DSR No. NSR-225) Supply Installation, Testing and Commissioning of Digital Phone (24Key).
10
-
-
(Non DSR No. NSR-226a) Supply and installation, of under floor raceways & accessories including
floor cutting, chiseling and necessary Civil work as per approval of
Architect/Consultant.
100mm wide, 38mm deep single Compartment, GI
extruded section for under floor raceways (rectangular shape).
600
-
-
(Non DSR No. NSR-226b) Supply and installation, of under floor raceways & accessories including
floor cutting, chiseling and necessary Civil work as per approval of
Architect/Consultant.
150mm x 150mm x 42mm, G.I. Junction Box with G.I. cover.
40
-
-
(Non DSR No. NSR-234) Supply , Installation , Testing and commissioning of 2 MP Indoor Dome camera with Vari-focal Lens - IP Network TDN Low-Light IR Rugged Dome Camera, 1/2.7" CMOS, 2 MP @ 25fps or better, triple stream, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 2.7–12 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, 3 IR LEDs Smart IR with upto 20m IR distance, 128GB SD card support, PoE, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, Having Operating temp range : –30°C to 50° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant.
30
-
-
(Non DSR No. NSR-235) Supply, installation, testing and commissioning of 2 MP Bullet camera with Vari-focal lens - IP Network TDN Low-Light IR Bullet Camera, 1/2.7" CMOS, 2 MP @ 25fps or better, triple stream, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 2.7–12 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, 4 IR LEDs Smart IR with upto 60m IR distance, 128GB SD card support,PoE, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 66, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant
2
-
-
(Non DSR No. NSR-236) Supply, installation, testing and commissioning of Supply , Installation , Testing and commissioning of 16 Channel NVR (Network Vedio Recorder), for recording upto 16CH @ 1080P with 02 nos. SATA HDDs minimum 16TB storage or more (recording requirement all cameras recording at 2MP, 25fps for 30 days),H.265/H.264/MJPEG/MPEG4 codec decoding, 01 HDMI & 01 VGA Display Output, Front Control Pannel with LEDs Indication, 3 nos. USB, iPhone; iPad; Android based Mobile clients, Video Export feature on USB, Search Mode: Time/Date; Alarm; Motion Detection (MD); Exact Search (accurate to a second); Smart Search, Dual HDMI Output, Alarm Input (4 nos.), Alarm Output (2 nos.), 16 POE Ports, eSATA Device, 320Mbps each Incoiming & Outgping throughput, Operating Temperature –10°C to 55°CCertification : CE, FCC & UL including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge.
1
-
-
(Non DSR No. NSR-237) Supply, installation, testing and commissioning of 6TB Surveillance HDD
2
-
-
(Non DSR No. NSR-238)Supply, Installation and commissioning of 42" Color Monitor including all accessories as per specifications.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements