Gurugram Metropolitan Development Authority Tender

Providing & laying of HDPE pipe (100 mm i/d) Grading PE 63, trench-less at required depth without obestracting the underground structures (For laying 1.5sqmm 12 core & 6 core cables as mentioned at serial no 1&2&3) threw this HDPE pipe to connect respective poles to control box). By Hydraulic Drilling Device without cutting of the road top surface at minimum 1.5 meter depth from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective traffic light pole including cost of all accessories for road crossing for laying of cables, compelete in all respects including the cost of all required accessories closer cap, reducers for joining HDPE pipe of various sizes , bends etc. and bring the site in its orignal position, upto the entire satisfaction of engineer-in-charge. Make:- Flexi-flow, Flow-well, finolex, Duraline.

Providing & laying of HDPE pipe (75 mm i/d) Grading PE 63,used in foundation at required depth without obestracting the underground structures (For laying 1.5sqmm 12 core & 6 core cables as mentioned at serial no 1&2&3) threw this in foundation only). By Hydraulic Drilling Device without cutting of the road top surface at minimum 1.5 meter depth from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective traffic light pole including cost of all accessories for road crossing for laying of cables, compelete in all respects including the cost of all required accessories closer cap, reducers for joining HDPE pipe of various sizes , bends etc. and bring the site in its orignal position, upto the entire satisfaction of engineer-in-charge. Make:- Flexi-flow, Flow-well, finolex, Duraline.

P/F of camera-based Vehicle Detector (for counting and Classification of vehicles) at each arm of the traffic junctions. The detector to be managed through web-based interface. The outputs of the detectors shall indicate the presence of vehicles and shall be used to influence the operation of the traffic signal controller and shall generate counts. SI has option to install Camera on the Traffic pole. Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Supply and erection of Solar system includng the cost of 2 Nos. battery 12 volt, 100AH, 1 No. solar charger controller 12/24 Volt, solar panel 12v/400 watt, structure for solar panel to be fixed on cantilever fixing,1 No Inverter, MS iron water proof box for inverter & battery as per relevent IS/BS Standard,with foundation compelete in all respects including the cost of all required accessories such as clamps, power cables, etc. upto the entire satisfaction of engineer-in-charge. Make:- Sukam, Microtek, Exide, Luminous, Amaron. Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Supply & Erection of 300mm dia Signal Heads ofpure polycarbonate material with LED RED, GREEN ARROW AMBER retrofit kit , EN certified, CE as per EN-12368 complete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in- charge.RED, AMBER Green Arrow. Confirming to BIS (Last amended)/ IRC specifications and approved by competent authority. Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Supply & Erection of 300mm dia Signal Heads of pure polycarbonate material with led retrofit kit , EN certified, CE as per EN-12368 Pedestrian Green/Red Pedestrian compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge. Equivalent of required / approved brand as approved by competent authority . Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Supply & Erection of Microprocessor (16 bit) based full matrix on reverse countdown timer 320mm x 320mm display character heights 240mm for ATC signals to depict the timings of RED ,Green, Amber Timmings independently display message STOP GO, Wait, Manual, ATCS etc as per EN12966, compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge.Equivalent of required / approved brand as approved by competent authority. Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Supply & Erection of vehicle actuated road traffic signal CUTE/ latest version controller of full configuration to signal functionsignal properly, incasing in metallic control cabinet (suitable to house Microprocessor controller, master controller/ switching control) fixed on RCC foundation of required size & depth. Confirming to BIS (Last amended)/ IRC specifications and approved by competent authority. (Note: - (1) No extra payment will be made for metallic control cabinet and RCC foundation forfixing metallic control cabinet) (2). Traffic signal controller shall permit settingof timings with locally and also give access for remote control through Ethernet/IP/GSM/Wifietc connectivity. The controller shall also provide IP interface to bring the signal to ICCC and monitoring and management, min 2 spareIP ports shall be available. Integration of trafficsignals to ICCC shall be responsibility of contractor. Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Construction of Concrete foundation for Hexagonal standard pole / cantilever galvanized octagonal pole , RCC foundation (Machine batched and machine mix design) M-25for size 600x600x1800mm with minimum 12 mm dia 8 nos main reinforcement rods with rings of 8mm dia @ 150mm c/c and with MS plate 600x600x12 mm thick for fixing the pole with all labour and material required to complete the job.Compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge. Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT. The foundation design shall take into consideration, the local soil condition and shall be approved by the competent authority

Construction of Concrete foundation for Hexagonal standard pole / cantilever galvanized octagonal pole , RCC foundation (Machine batched and machine mix design) M-25 for size 450x450x1200mm with minimum 12 mm dia 8 nos main reinforcement rods with rings of 8mm dia @ 150mm c/c and with MS plate 450x450x12 mm thick for fixing the pole with all labour and material required to complete the job.Compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge. The foundation design shall take into consideration, the local soil condition and shall be approved by the competent authority. Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Supply of Cantilever (6.5+0.5) = 7 mtr. long Galvanized octagonal pole having top dia 100mm bottom dia 200 mm with a base plate is 320 x 320 x 20mm. pole sheet thickness is 4mm, with a suitable arm of (0.4 + 5.6) 6 mtrs with a thickness of sheet 3mm having a top dia of 75mm, bottom dia 100mm, with suitable foundation accessories nut bolts, J hooks, i.e. 25mm dia 4 nos 850mm along with junction box in pole with steel rope) specification and steel grading shall be as per BSEN 10025 & relevant IS, compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge. Make: Shiva, Kesper, Paruthi, JKM Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Supply of standard Hexagonal pole 4 mtr. Top dia 90mm, bottom dia 140mm, thickness 3mm with base pate 200x200x12mm with all required accessories. Specification and steel grading shall be as per BSEN 10025 & relevant IS standard compelete in all respects including the cost of all required accessories with suitable foundation accessories nut bolts, J hooks i.e. 20 mm dia 4 nos 700 mm upto the entire satisfaction of engineer-in-charge. Make: Shiva, Kesper, Paruthi, JKM Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Switch 8 port 10/100 Base T as per technical specifications The switch shall be industrial grade suitable for outdoor environment. Should provide 12 x 10/100/1000 Mbps ports for downlink out of which minimum 8 Should be PoE/PoE+(as required) and 4 should be SFP / GE Ports, compelete in all respects including the cost of all required accessoriess such as cable clamps etc. to meet the end objective of the item,3 upto the entire satisfaction of engineer-in-charge. Make:- Cisco Note: - Detail of Technical & Functional specification are mentioned in Section- 10 in addtional document of HEW portal of this DNIT.

Provision for Operation and Mainentnance of Traffic signal lights for 7 years @ 25 %