Guru Jambheshwar University Of Science And Technology Tender

[HSR 10.52.1]Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

[HSR 10.53.1]Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

[HSR 10.96]Providing and fixing Glass mosaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

[HSR 11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.

[HSR 13.30.1]Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes

[HSR 22.222.1.1]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 1.1. Single Socket Type A 160mm o/d SWR UPVC pipe lines laid complete

[HSR 23.3.1.1]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 1.1. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A

[HSR 23.3.4.1]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 4.1. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch required MS Box etc complete as required Group A

[HSR 23.3.5.1]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 5.1. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required Group A

[HSR 23.3.6.1]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.1. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm)

[HSR 23.7.6.1]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.1. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 20 mm dia.

[HSR 24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

[HSR 24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.

[HSR 24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required.

[HSR 24.2.4.2]LT CABLE 4.2. Laying of underground cable in pipe /existing open/closed trench etc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core

[HSR 24.5.2.2]MISCELLANEOUS ITEMS 2.2. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 50/40 mm outer dia/ inner dia

[HSR 24.8.2]RCC FOUNDATIONS FOR OCTAGONAL POLES 2. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 4m high pole

[HSR 32.28]Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. and concrete of different grade as per design will be paid separately).

[HSR 4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil

[HSR 4.14.1]Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil.

[HSR 4.32]Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

[HSR 5.23.1]Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 1. Nominal concrete 1:1.5:3 or richer mix (i/c equivalent design mix)

[HSR 5.34]Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.

[HSR 5.44]Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

[HSR 5.7.4]Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortar

[HSR 5.70]Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

[HSR 6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

[HSR 6.14.1]Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

[HSR 6.15.1]Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

[HSR 6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

[HSR 6.30.1]Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete

[HSR 6.30.2]Centering and shuttering including strutting, propping etc. and removal of form for 2. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

[HSR 6.30.3]Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform

[HSR 6.30.5]Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers

[HSR 6.30.6]Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts

[HSR 6.33.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 6. Thermo-Mechanically Treated bars of grade Fe-500D or more.

[HSR 6.34.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more.

[HSR 7.21.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)

[HSR 7.22.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 1. Cement mortar 1:4 (1 cement : 4 coarse sand)

[HSR 8.26.2.2]Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 2.2. Granite of any colour and shade Area of slab over 0.50 sqm

[HSR 9.16]Providing and fixing pressed clay tile (Mangalore tiles) of size 200mm x 125mm x 10mm on slopping roof top/ window projections with 12mm thick cement, coarse sand mortar 1:3 including cost of ridge wherever required as per approved design complete in all respect up to 4 storey or 15 Meter Height.

[NS Item] Manufacturing, Supplying and erection of 50mm thick stone jali of pink color made of bansi pahdpur dholpur stone in approved designs and sizes, fixing by Dry Cladding using SS Cleats, SS Threading rods , Self Tapping Screws etc. complete in all respects including scaffolding and all other plants and machinery with all type of labour . with entire satisfaction of Engineer in charge.

[NS Item] Providing and laying matt finished full body vitrified tile of size 600x600x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all color and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes and patterns including the joints having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg) , including filling and grouting and finishing complete as direction of Engineer-in-Charge.

[NS Item] Supply and erection of fountain system/work having the following specifications/ items: i - Supply and erection of Foam Jet Nozzle 1` Smooth bore single Foamy water effect. Normally used in groups to form a circle or straight line of jets. Sizes - Available from 12mm to 50mm inlet sizes with a variety of bore sizes. Water level independent (no change in water effect with varying water level) brass chrome plated Make Blue Space Industries. ( 2 Nos) ii - Supply and erection of Diamond Cluster Jet Nozzle 1` Make Blue Space Industries (1 No) iii - Supply and erection of 1` Valve Brass Chrome Plated The handle of the Brass Ball Valve lies flat in alignment with the flow when open. Can Handle High Pressure and Temperature (Working temperature -10 to 100 deg C) . Application: Water/ Gas / Oil. Thread Ends Comply Per ANSI B1.20.1. Full Port. Rated Pressure Bar 40 Bars. (3 Nos). iv - Supply and erection of Ball Joints 1` SS High Quality Corrosion Free Make Blue Space Industries. (3 Nos) v- Supply, installation, commisioning and testing of Underwater light (DMX controlled) (warm white)/RGB IP 68 18valt DC shockproof, Epoxy encapsulated compression type cable entry glands for complete water protection. Noryl body for 100% corrosion free life even in seawater applications. Make reliable décor, make premium Low Voltage for safety.Make Blue Space Industries. (14 Nos) vi - Supply,installation,commisioning and testing of SMPS Light Programmer / Controller tunes the strengths of three basic colors of red, green, and blue, and mixes them to generate any specific color. It also used for Power our Underwater lights which is working on DC supply. Make Blue Space Industries. (1 No) vii - Supply and erection of Sand Filter Fibreglass Top Mount 500 mm diaCapacity Per Hr Turnover: 10800 LValve: 50mmMax operating pressure: 36 psi / 2.5 barMax temperature of 43°C (109°F)Sand Required: 85 KgMake Emaux. (1 no) viii- Supply and erection of sand media for Sand FilterA sand media Contains silica sand or crushed granite. Contaminants are filtered from the water as it flows through the filtering media. Multiple tanks of sand media are used to obtain sufficient filtration at the design flow rate of the Swimming Pool. (100 Kg) ix - Supply,installation,commisioning and testing of Motor pump 1HP 220V/50Hz,2` Flange, IPx5 Waterproof standard, Ring Lock design, Testing Pressure 50PSI (3.5 Bar),Water flow: 19m³/hr, S S 316 Shaft and Mechanical SealMake Emaux (2 Nos) x - Supply,installation,commisioning and testing of Surface Mounted Round LED Light 6w/12v, 102 LED Light, Color Cool White, Material: ABS , Waterproof : IP68, Wall Mounted (surface Type) Shockproof StandardDesigned to deliver brilliant and vibrant color. Make Emaux (10 Nos) xi - Supply,installation,commisioning and testing of Transformer for Underwater Light 105 VAMake Emaux (1 No) xii - Supply,installation,commisioning and testing of Floor Inlet 2` for concrete Pool UV Resistance and better grade of ABS used gives longer life span. Different options of fitment (e.g) Press fit in 1.5” PVC pipe,2”.FTR or Pentair standard wall conduit gives freedom of installation to installer. Adjustability gives options to vary the flow as required in different sizes of pools Make Emaux (4 Nos) xiii - Supply and erection of Main Drain (white) High quality main drains are made of chemical and UV resistant ABS.Main drain line allow you to fully drain your pool if necessary.Make Emaux (1 No) xiv - Supply and erection of NANO TECH UV-C 75W, 310L Stainless Steel UV System 110-240VMake Emaux (1 No). xv - Supply, installation, commissioning and testing of Control panel operating for each pump hp Electrical panel cubical type wall / floor mounted the panel shall be fabricated out of 2.0 mm thick CRCA MS sheet, duly stove enameled with synthetic paint of approved shade over a coat of red oxide primer. ( all accessories are of reputed make) i./c MCBs, main switches change overs etc. as per requirements. Contractor, rely, Make Blue Space Industries. (1 No) Note:-This is a complete job. Any item which is not taken in DNIT but required for compliances of the work shall be part of work .Nothing extra shall be paid on this part.

[NS Item] Supply Installation Testing and Commissioning of Landscape Speaker 5.25` LF: Two Way Coaxial Mushroom Landscape Speaker with Power rating 45W cont.at 8 Ohms: support power tapping at 70V/100V:etc Make JBL Mode Control 85M.

[NS Item] Supply Installation Testing and Commissioning of Digital Power Amplifier DCi Series, Network Based Multichannel Digital Power Amplifier with 4 x 2400W: built-in DSP and BLU Link Crown Model DCi 4|2400N

[NS Item] Supply Installation Testing and Commissioning of Digital Signal Processor ( DSP) Make BSS Model BLU100

[NS Item] Supply Installation Testing and Commissioning of 10 Channel Mixer Make Yamaha.

[NS Item] Supply Installation Testing and Commissioning of 4 sq mm twin Core speaker armored cable Make Finolex/Have

[NS Item] Supply Installation Testing and Commissioning of 3KVA Online UPS Overvoltage cutoff device (OVCD), Support for up to 42AH external battery cabinets, Generator Compatible with Wide Input. Wide Input Voltage window (110 – 280Vac) for Indian Environmental Condition and for Optimized Battery Performance. UPS would support SNMP Mnagaer and web browser On Line With Half hour Backup MAKE: APC/ Miicrotek/DELTA/Emerson

[NS Item] Supply Installation Testing and Commissioning of PC Client Intel i7 processor with clock speed- minimum 3.0GHz, RAM8 GB and Expandable. Window 10 or Window 2016 Server or Unix based Edition .Minimum 1TB . LAN Interface 10/100/100 Mbps Ethernet.).. Mouse Optical . USB port at front. Make: HP/ Dell/Lenovo.

[NS Item] Supply and erection of M S wall fan with 90-Degree Oscillation, power conumption-100 watts, wall mounted ,Industrial Heavy duty,230 V,50 Hz ,air dilivery-8100 CMH, speed 1400 RPM ,Sweep size -450 mm, Speed setting-3 speed Setting, Noise level-50-60dB with thermal overload protection. Make-Havells ,Orient, Bajaj, Usha.

[NS Item] Supply and Erection of recess mounting 22 W LEDround/squareconcealesd panel with high efficient LED’s and glare free opal diffuser. Complete in all respect with the entire satisfaction of Engineer-in-Charge. Make: Philips/Bajaj/Havells/Halonix,RR.

[NS Item] Supply and erection of P.U Painted 4 Mtr. Decorative Pole made out of GI Pipe as per our Cat no.( VSTP-21) with M.S Base Plate Ø345x12mm. casting on joint ,inbuilt control box at the bottam of the pole for space for housing MCB and terminal strips ect. Specification of pole saction :- 1. 1st Section - Ø114.3 x 1000mm 2. Ø 60.1x 3000mm. 3.With Foundation Bolt 16x450x4 Nos Without Light With Polyurthane Painted as per your given color shade With Electrical Accessories like - Bakelite Sheet and Wire etc

[NS Item] SITC of Post Top LED Light 50W as per Cat. No. VSTP PT-01 S) fixture made of aluminum Die Cast housing with front opening PC Diffuser having IP65 protection, PF).90 , Lumen-110/w with High Efficiency LED, THD-10%, potted driver with 6kva surge Protection, with 2 year warranty.

[NS Item] Supply of 25 sqmm 4 core Power Cables multi stranded Aluminium conductor, XLPE Insulated, cores laid up PVC tape / Extruded Inner sheath Armour, FRLS at outersheath,1100V grade as per IS 7098(Part 1) 1988 with uptodate amendments .Make:-Havells,Grandley Polycab,KEI).