Government Of Haryana Tender

MAIN PUMPING STATION Design, construction, erection, testing & commissioning of MPS and following components including O & M for 12 months during defect liability period after trail run of 3 month and 10 year thereafter :- (i) RCC inlet chamber, screen chamber, rectangular collecting tank suitable for 2.50 MLD average flow with peak factor 3, Providing and installing 1 No. 1800 LPM, 20 mtr. Head, 1 no. 3600 LPM 20 m head, 1 no. 5400 LPM 20 m head, non clog sewage pumping sets each with suitable LT panel equipped with all safety devices, automatic capacitor bank and submersible cable from LT Panel to pump sets complete in all respects. (ii) K-9 D.I pipe of suitable dia at MPS including welding and screwing of flanges. ISI Marked D.I fittings, Sluice valves, Non return valves as per requirement even for bye pass arrangement complete in all respects. (iii) 3 Nos. CI Gear operated sluice gate with SS spindle ( SS 410) and seats ( SS 304 ) (2 Nos for screens and no.1 for partition of collecting tank) as per design. (v) Supply and installation of 2 nos. mechanical coarse screens of suitable size. For 2.50 MLD average flow with peak factor of 3. Note: 1. The structures of MPS shall be designed / constructed as per depth of existing incoming Trunk sewer at MPS. Connecting of same dia meter sewer from last manhole of Trunk sewer to proposed structures at adequate depth is included in scope of work. 2. All the pumping machinery, Panel Board, Level sensor etc shall be controlled by PLC & SCADA and shall be synchronized with the PLC panels at MPS & STP site through broadband internet facility. 3. The size and quantities of all the above components will be as per approved structural/ Hydraulic/ Mechanical / Electrical Design to be approved by department before actual execution of work including O & M for 12 months during defect liability period after trail run of 3 month and 10 year thereafter :-

SEWERAGE TREATMENT PLANT Design, construction, erection, testing & commissioning of 2.50 MLD capacity Sewage Treatment Plant at village Khanpur Kalan Distt. Sonipat based on Sequential Batch Reactor (SBR) Technology complete in all respect including Landscaping & all other contingent Electrical, Mechanical, Piping & Instrumentation work with PLC & SCADA Arrangement for STP integrated with MPS as per detail given in the bid document and following components including O & M for 12 months during defect liability period after trail run of 3 month and 10 year thereafter :- (i) 2 No. High mast of 12 mtr GI Octagonal pole of 4 mm thickness (T=100 mm, B=200 MM, Base plate = 320 x 320 x 20 mm), window at 500 mm from base plate with 8 no. LED energy efficient lamps on each pole. (ii) Supply and installation of 1 no. SS main Gate of SS-304 Grade 3.65m. wide main gate and 1.20m. wide wicket gate (total weight not less than 500 kg) at STP site. (iii) Providing and installing 2 no. centrifugals (1 working + 1 stand by) including centrifuge feed pump, all fittings, instrumentation, electric panel board etc. as per design complete in all respect including packing dry sludge in 20 kg. bag and supplying the same to the market kisan sewa Kendra or as directed by engineer in-charge within lead as pointed at clause 4.4.5 of the NIT, including O & M for 12 months during defect liability period after trail run of 3 month and 10 year thereafter :- Note: All the infrastructure except construction of boundary wall, path ways / roads, Staff Quarters & Treated effluent carrier from STP to Drain, required to be executed at site to make the MPS / STP functional is included in the scope of work of lump sum job.

CCTV CAMERAS Providing and installing 5 CCTV Cameras ( 3 cameras for STP and 2 Cameras for MPS). Complete as per satisfaction of the Engineer-in – charge within 96 hours of signing the arrangement along with 90 days recording (DVR), 32 inch LED Screen, 16 channel DVR at STP site and 8 channel DVR at MPS site with connectors, cables, poles and power supply with online real time output facility. The cameras at both the sites i.e MPS and STP shall be synchronized at STP site. CAMERAS: At STP & MPS Site- 1 no. PTZ speed dome 360 degree 50x zoom camera, 3 no. 12 mm lens size, 1 nos. 3.6mm lens size. MAKE: Sony/ Canon/ Panasonic/ Samsung. CCTV Cameras should be installed and commissioned before starting execution of work including O & M for 12 months during defect liability period after trail run of 3 month and 10 year thereafter :-