Maharshi Dayanand University Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 11,06,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HRY_97522_1Bid Award Id
ViewTender No
MDU/EE/2019/Civil/38Tender Authority
Maharshi Dayanand University ViewPurchaser Address
-Website
http://https://mdu.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Cement concrete plain 1:4:8 or 1:5:10 ((b)
385
-
-
Cement concrete plain 1:3:6 mi (c)
20
-
-
Reinforced cement concrete with clearing and straightening and cutting of bars if required. (e)
35
-
-
HSR NO. 8.5(b)
Dismantling brick work, tile masonry or tile lining and tile terracing.
In cement
35
-
-
(HSR NO. 8.17(a)) Removing doors and windows (wooden and steel) together with the dismantling of walls Doors
15
-
-
Windows (b)
25
-
-
(HSR NO. 8.18(a)) Removing door and windows (wood and steel ) with chowkats by making recesses in walls when the wall is not to be dismantlled.
Doors
15
-
-
Windows (b)
25
-
-
(HSR NO.8.21(b)
Dismantling steel work upto a height between ridge and floor level upto 5 metres in single section including dismenbering:-
Channels, angles, rees and flats
280
-
-
(HSR NO. 8.24)
Removing rolling shutters including top over brackets and side guides etc. complete
15
-
-
(HSR NO. 8.38)
Dismantling white or coloured glazed tiles ( to be carefully removed)
4895
-
-
(HSR NO. 8.3(a)) Dismantling stone spalls or brickbats filling
in dry
675
-
-
(HSR NO. 8.25)
Dismantling cement conglomerate/ terrazzo floors 25mm to 50mm thick including concrete base
75
-
-
(HSR NO. 8.32(c) ) Scraping Cement plaster
4020
-
-
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unservicenable meterial within University premises as per entire satisfaction of Engineer-in-charge. N.S
140
-
-
Dismantling wooden boardings in lining of walls and partitions,excluding supporting members but including stacking within University premises as per entire satisfaction of Engineer-in-charge
Thickness above 10 mm up to 25 mm N.S (I)
30
-
-
Thickness above 25 mm up to 40 mm N.S (II)
205
-
-
Dismantling C.I or asbestos / P.V.C rain water pipe with fittings and clamps including stacking the material within University premises as per entire satisfaction of Engineer-in-charge. N.S (II) 100 mm dia pipe
60
-
-
150 mm dia pipe N.S (III)
20
-
-
Dismantling GI pipes (external work) including excavation and refilling rrenches after taking out the pipes, manually/ by machanical means including stacking of pipes within University premises as per entire satisfaction of Engineer-in-charge. N.S (I) 15 mm to 40 mm nominal bore m
40
-
-
Above 40 mm nominal bore --N.S (II)
18
-
-
Dismantling C.I pipes including excavation and refilling trenches after taking out the pipes, manuallu / by machanical means breaking lead caulked joint, melting of lead and making into blocks including stacking of pipes and lead at site within University premises as per entire satisfaction of Engineer-in-charge. N.S (I) up to 150 mm diameter
325
-
-
Above 150 mm dia up to 300 mm dia N.S (II)
18
-
-
Above 300 mm diameter N.S (III)
15
-
-
Taking out C.I cover with frame from RCC top slab of manholes of varous sizes including demolishing of RCC work manually by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within University premises as per entire satisfaction of Engineer-in-charge. N.S
16
-
-
Dismantling of road gully chamber of various sizes including C.I grating with frame including stacking of usefull materials near the site and disposal of unserviceable materials within University premises as per entire satisfaction of Engineer-in-charge. N.S
85
-
-
Dismantling of C.I sluice valve including stacking of usefull materials within University premises as per entire satisfaction of Engineer-in-charge N.S (I) Upto 150 mm diameter
10
-
-
Above 150 mm diameter N.S (II)
15
-
-
Dismantling aluminium / Gypsum partitions,doors, windows fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceble material with in University premises as per entire satisfaction of Engineer-in-charge N.S
15
-
-
Disposal of building rubbish / malba/ similar unserviceable, dismantled or waste materials by machanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by University premises as per entire satisfaction of Engineer-in-charge N.S
1375
-
-
Credit (N.S)
Iron scrap i.e. pipes (G.I, C.I, D.I), old reinforcement bars, pumps, valves, spindles, window frames, door frames, MS plates , strips, railings, MS filteration plant etc. complete as per entire satisfaction of Engineer-in-charge.
14500
-
-
Credit (N.S)
Electrical scrap i.e. old mainswitches,busbars enclosures, bushbars, starters, cables, motors, fans, tube sets etc. complete as per entire satisfaction of Engineer-in-charge.
1000
-
-
(CIVIL WORK -Part -II)
Earth work excavation in ordinary soil exclusive of compensation of earth- earth-work undressed with a combined lead upto 15 metres including breaking of clods. (HSR-6.2(b))
165
-
-
Extra for additional depth exceeding 1.5m depth.
80
-
-
Extra for additional depth exceeding 1.5m depth.
40
-
-
Earth filling under floors with surplus soil excavated from foundation and taken only from outside the building plinth, in 15 cm layers including ramming watering and consolidating lead upto 30 metrs. (HSR 6.13 a) (Subject to condition, soil is non plastic)
135
-
-
Cement concrete 1 : 4 : 8 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR-10.39)
310
-
-
Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level. (HSR-10.59)
8
-
-
Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc., excluding steel reinforcement but ( For work below 1.50 meters depth below ground level, add Rs. 6.00 per cum for every additional depth of 4 meters, or part thereof ) (HSR-10.90)
645
-
-
Extra over Item Nos. 10.79 to 10.94, if 1:1:2 mix is used instead of 1:2:4 (HSR 10.95(b))
645
-
-
Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. (HSR-10.86)
35
-
-
Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded. (HSR 10.114)
15
-
-
First class brick work laid in cement sand mortar 1:6 in foundation and plinth.(HSR 11.2)
8
-
-
11.43 cm thick brick wall with every, fourth course, reinforced with hoop-iron, laid in 1:4 cement sand mortar in super structure. (HSR 11.46)
First Storey
75
-
-
Second Storey
8
-
-
First class brick work laid in cement, stone dust (from crusher) mortar 1:5 in first storey upto 4 meters above plinth level. (HSR 11.28)
First Storey
70
-
-
Second Storey
30
-
-
Top khurra 0.6 m x 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR 13.50)
4
-
-
Cement concrete 1:2:4 gola 10 cm x 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR-13.64)
40
-
-
Screed of 50 mm of thick cement concrete 1:8:16 to be laid below the topping (HSR 14.4)
Second Storey
15
-
-
50 mm thick ironite floor consisting of 40 mm thick cement concrete 1:2:4 base and top layer 6 mm thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to 2 parts of hard granite chippings 6 mm gauge by volume, finished smooth with hard rubbing. (HSR-14.74)
410
-
-
Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS.(HSR 14.89)
65
-
-
Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in skirting/dado laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS.(HSR 14.90)
12
-
-
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. b) size of ceramic glazed tiles 300x450mm (Make Nitco, RAK & Johnson) (HSR 14.92 b)
First Storey
525
-
-
Providing and fixing ceramic tiles/ anti skid tiles of size 400mm x 400 mm or above size of approved make in floors, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR 14.91) First Storey
190
-
-
Extra for nosing in granite for treads (HSR no 14.50)
First storey
415
-
-
Second storey
620
-
-
Laying and fixing Granite stone in all shades 15mm to 18mm thick in skirting/dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite including labour for fixing cramps pins and dowels etc. GRANITE WILL BE SUPPLIED BY DEPTT.(Based on HSR 14.95)
First Storey
115
-
-
Second Storey
110
-
-
Granite stone in all shades 15mm to 18mm thick in flooring & over service slab in any pattern as specified laid on 20 mm thick cement coarsed sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone comp. in all respect. (HSR 14.96) granite shall be supplied by the Deptt.
First Storey
410
-
-
Second Storey
110
-
-
Plastering on wall 12 mm thick cement plaster 1:6 (HSR 15.7)
First Storey
1060
-
-
Second Storey
290
-
-
Plastering on walls 15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)
First Storey
1060
-
-
Second Storey
290
-
-
10 mm Cement Plaster 1:4 under side of ceiling.(HSR-15.52)
First Storey
870
-
-
Second Storey
60
-
-
Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work. (HSR 16.58)
900
-
-
Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface ( first quality paint) (HSR 16.25)
1490
-
-
Providing two coats of exterior acrylic emulsion paint (HSR 16.79 b)
1490
-
-
Painting two coats with plastic emulsion paint on walls on new work to give an even shade. (HSR 16.30)
1190
-
-
Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K/Birla make) (HSR 16.81)
2675
-
-
Providing and fixing glazing in aluminium door, windows ventilator shutter and partitions etc. with PVC/neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items.) (HSR 17.98 b) with float glass panes of 5.00 mm thickness.
35
-
-
Supplying and fixing rolling shutters, of approved make, M.S. Laths, interlocked together through their entire length, and jointed together, at the end, by end locks mounted on specially designed pipe shaft, with brackets, side guides, 27.5 cm long wire spring grade no. 2, and arrangement for inside and outside locking, with push and pull operation complete, including top cover 0.80 mm thick (Payment is to be made for the exact size of opening where rolling shutter is to be fixed): HSR 18.18)
12
-
-
Providing and fixing ball bearing, for push and pull type rolling shutters, from 9.20 to 12 sqm area HSR 18.18©
1
-
-
FE-500 EQR TMT steel bars R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in positon complete. (HSR item No. 18.22)
912
-
-
Pressed steel sheet frames (chowkats) consisting of 2 mm thick steel sheet of the specified section including iron lugs (hold fasts). Iron hinges conforming to P.W.D. specification including bolts for fixing stops lock notch provision for receiving tower bolt and finished with one coat of ready mixed paint red lead non setting primer of approved quality fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete. (HSR item No. 18.34)
(a) door & window frame of size 89mm x 50mm with 40mm wide single rebate.
160
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required neoprene felt etc. aluminium sections shall be smooth, rust free straight mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling C.P brass / stainless steel screws, all complete (HSR 17.95)+ note (i) Add Rs. 15/- per kg. extra if powder coating of 50 micron is done instead of anodizing in above item no. 9 & 10.
54
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS : 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/paneling C.P brass/stainless steel screws, etc. complete. Shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required including aluminium fitting (HSR 17.96) + note (i) Add Rs. 15/- per kg. extra if powder coating of 50 micron is done instead of anodizing in above item no. 9 & 10.
216
-
-
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position.(HSR-no. 18.12) (1040.35+500%=1390.20) (For Class- IV residence only)
15
-
-
Kotah stone flooring 20 to 25mm thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (HSR 14.62) (For Class- IV residence only)
(i) First Storey
150
-
-
Second Storey
320
-
-
Kotah stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (HSR. 14.66) (i) First Storey
25
-
-
Second Storey
270
-
-
CIVIL WORK - NON-SCHEDULED ITEMS Pre-construction Work (i) Providing and injecting chemical emulsion for pre-constructional antitermite treatment and creating a chemical barrier under and around the column pits, wall trenches basement excavation, top surface of plinth filling junction of wall and floor along with the external perimeter of building, expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured) (i) Note:- Work to be executed with premise Imidacloprid 30.5% of Bayer company through valid License on form-6C of commercial pest control. (N.S ITEM)
310
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both
side inclusive) as per IS : 277 and consisting of angle cleats of size
25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange
of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish
of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (DSR NO. 12.45) 12.5 mm thick tapered edge gypsum moisture resistant board. (DSR NO. 12.45.3)
330
-
-
Earth Filling under floors with TIBBA SAND of 6% taken from outside the campus area with all lead & lift, including loading, unloading, laid in 15 cm layers including ramming, watering compensation of earth etc. complete in all respect (N.S ITEM)
55
-
-
Supplying of 15mm to 18mm thick slab of pre polished granite stone as specified as per sample approved by the Engineer Incharge. A Cat eye Granite
245
-
-
Jet-black ( without spots)
200
-
-
Paradisso
175
-
-
Jeerawal
Note 1. Laying of granite will be paid under item no HSR(14.95) & (14.96 ) 2. Measurement shall be made as per finished floor/wall etc on actual basis.
125
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (N.S ITEM)
19
-
-
Providing and fixing galvanized chicken wire mesh (24 gauze 12 mm size) to junctions of concrete and masonry work and other locations including cutting to required sizes, side laps of minimum 75 mm and fixing in position with galvanized iron wire nails, complete. (N.S ITEM)
22
-
-
Providing and fiixing solid laminated flush door shutters having uniform thickness of 37mm with smooth finish and moisture content 10 to 12% with water absorption of 2%, climate stable, warp and bend free as certified by IS-2202 with 1mm HPL conforming to IS - 2046 including , screws chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position).(Greenlam, Century make, duro) (N.S ITEM).
65
-
-
Providing and fixing in position 40 mm thick silfiL Duraboard HD-100 premoulded compressible filler board in black colur as per specification.(N.S ITEM)
5
-
-
Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately)12 mm thick cement board(N.S ITEM)
8
-
-
Providing and filling in position bitumen mix filler of Proportion 80 kg of hot bitumen, 1 kg. of cement and 0.25 cubicmetre of coarse sand for expansion joints.(N.S ITEM)
15
-
-
Expansion joint vertical sealent :-
(a) Cleaning of the expansion joint by air blower to remove any dust, dirt, loose particles including removal of laitance and cleaning the inside of the expansion joint with compressed air.(N.S ITEM)
7
-
-
Providing and applying masking tape and backer rod (N.S ITEM)
7
-
-
Providing and applying primer with Sika Primer 3 (IN)(N.S ITEM)
7
-
-
Providing and applying Polysulphide based joint sealant Sika Polysulphide or equivalent as per Approval by Engineer-in- charge by caulking gun as per standard method statement including tooling , finishing in a convex profile etc.(N.S ITEM)
15
-
-
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).(N.S.ITEM).
770
-
-
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: Fabricating and supplying serrated M.S. hot dip galvanised /Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (N.S.ITEM).
Note: Complete specification and details of this item are mentioned in the Tender document.
85
-
-
Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved
colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved
shop drawings, as specified, and as directed by the Engineer- in- Charge. “For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20
%, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. (N.S.ITEM)
85
-
-
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm) having DBR Value-30. DSR Item No.16.78.1.
300
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all evels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as
specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled Working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with uminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with
aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places."
35
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(N.S)
45
-
-
Supply and Installation of Compact Laminated Board Toilet cubicals of having thickness 12mm of single colour, Size of cubicle As per drawing (W) & (D) X 2003mm (H) having door size 610 x 1750mm, Overall height of cubicle is 2003 (including bottom Gap of 150mm) with all Accessories : Standard - Merino , Greenmake Aluminium, stainless steel - 304 Grade accessories, Such as Aluminium 'U' channel, 'F' channel, Door stopper channel, Top rail and Stainless steel Coat hook, Privacy thumb turn c/w occupancy indicator, Door knob, Hinges with cover, Adjustable foot 316 Grade, Rubber Stopper lining, S.S. Screws 304 G & P.V.C Wall Plugs of MERINO make. (N.S.ITEM)
29
-
-
Supply and Installation of Greenlam Sturdo Locker system - 4 tier having thickness of shelves & doors - 9mm and 3mm thickness of sides with height of columns - 1880mm (including Bottom gap 80mm). Size of lockers is 300(Width), 443mm (Height), 450mm (Depth) with standard accessories (N.S.ITEM)
34
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.labour rate (N.S ITEM)
315
-
-
Providing and Fixing 6 lever Gloria handle set with lock body - Model 5655 OF GODREJ or approved by Engineer-in-Charge.
25
-
-
Providing and Fixing Tower bolt 12" Aluminium - Model Godrej or approved by Engineer-in-Charge.
23
-
-
Providing and Fixing Tower bolt 6" Aluminium - Model HC-1(I) of Ebco or equivalent make as per prior approval of Engineer-in-Charge.
3
-
-
Providing and Fixing SS finish door stopper - Model Godrej or equivalent make as per prior approval of Engineer-in-Charge.
21
-
-
Providing and Fixing SS back stopper - Model Godrej or equivalent make as per prior approval of Engineer-in-Charge.
21
-
-
Providing and Fixing NEH 03 Pull handle - Model Godrej or equivalent make as per prior approval of Engineer-in-Charge.
21
-
-
Providing and Fixing Ebco SS 304 friction stay-FRS-16 - Model of Ebco or equivalent make as per prior approval of Engineer-in-Charge.
8
-
-
Providing and Fixing Ebco Euro window handle (brown) for Outward Opening Window - Model E-WH1 with HB of Ebco or equivalent make as per prior approval of Engineer-in-Charge.
4
-
-
Providing and Fixing Ebco SS 304 friction stay 12" (for ventilators) - Model FRS 10HL of Ebco or equivalent make as per prior approval of Engineer-in-Charge.
54
-
-
Providing and Fixing SS ball bearing hinge (4 x 3 x 3mm) - Godrej or equivalent make as per prior approval of Engineer-in-Charge.
172
-
-
Providing & laying tiles from Pavit (Model Granulato model 10 mm thickness of size 300 x 300mm . 20 mm thick on bed of cement coarse sand mortar 1:3 complete in floors and risers as approved pattern desired by the Engineer-in-Charge. SOMANI, JOHNSONS, PAVIT make
1960
-
-
Grouting the joints of flooring tiles having joints of 5 mm width, using Latapoxy SP-100 Stain free grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting with spacers and finishing complete as per direction of Engineer-in-charge of MYK Laticrete, Weber or equivalent make. (N.S.ITEM)
3800
-
-
Providing and Laying glazed tiles of size 247 X 122mm with 8mm thickness having water absorption of maximum 3% and conforming to ISO: 13006/EN 14411 group Blb of approved make in all colours and shades and pool fiting conforming to BS6431 : part 2, EN 121 group A1, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and solid epoxy grout and matching pigments. These tiles are made as per strignent standards laid down ASA, FINA (Federaion international de notation amateur) & European standards of JOHNSON Make (excluding the cost of grouting with epoxy grout and spacer). (N.S.ITEM)
1840
-
-
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading,well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.(DSR NO.16.64)
1960
-
-
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes
of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge. (DSR NO.-26.39)
90
-
-
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure, such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. (DSR NO.-22.26)
155
-
-
Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 45 MPa and adhesive bond strength Class R3 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (DSR NO.-22.25)
For sealing cracks and faulty construction joints, by preparing the surface, making U-shape groove size of 25x25mm and then priming the surface with integral crystalline slurry @0.05kg per running meter and while the surface is tacky then filling the groove upto top edge with crystalline mortar @1.50kg per running meter. Once crystalline mortar is touch dry then finally applying two coats of integral crystalline slurry @0.05kg per running meter per coat on treated surface. (DSR NO.-22.25.1)
145
-
-
For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @0.070kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar@0.040kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040kg to fill the hole). (DSR NO.-22.25.2)
120
-
-
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. (DSR NO.-22.23)
(i) For vertical surface two coats @0.70 kg per sqm per coat. (DSR NO.-22.23.1)
520
-
-
For horizontal surface one coat @1.10 kg per sqm. (DSR NO.-22.23.2)
1430
-
-
Providing and fixing Shear connector/studs of 16mm dia and 400mm length by creating hole as 200mm or as per the specification and fixing up shear studs, filling of holes with hilti HY-200 DURAL 452 GEL.The placing and application shall be in accordance with the manufacturer's instructions and as per the direction of the Engineer-in-charge.
135
-
-
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineerin-Charge.
(The payment shall be made on the basis of actual weight of approved grout injected.)
(i) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work.
110
-
-
Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work.
115
-
-
Epoxy injection grout in concrete/RCC work of approved make.
135
-
-
Providing and applying DURAL LPL MV make Euclid Chemicals is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, medium viscosity epoxy resin is the perfect solution for bonding new, plastic concrete to existing concrete slabs and steel. DURAL LPL MV (Long Pot Life) provides extended working time versus conventional epoxy bonding agents.
Post Installation of Rebars with Hilti RE-500 Chemical
225
-
-
Supplying, Drilling/Cleaning hole and injecting Hilti make ETA Approved HIT-RE 500 chemical with the help of Hilti HDM 500 dispenser, into a hole of dia & depth as per manufacturer/structural consultant's specification and fixing rebars of the required diameter subsequently. The chemical should have successfull usage in wet/water saturated concrete/diamond cored holes. The chemical should have approval against creep & corrosion. Fixing methodology to be followed as per manufacturers guidelines. - Steel will be paid under separate subhead. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consulatnt and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Supplying, Drilling/Cleaning hole and injecting Hilti make ETA Approved HY-200-R chemical with the help of Hilti HIT-MD 2000/5000 dispenser, into a hole of dia & depth as per manufacturer/structural consultant's specification and fixing rebars of the required diameter subsequently. The chemical should have successfull usage in dry and wet areas.The chemical should be suitable for both cracked and non cracked concrete. Fixing methodology to be followed as per manufacturers guidelines. - Steel will be paid under separate subhead. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consulatnt and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval.
(I) 8mm dia rebar at 120mm depth
75
-
-
10mm dia rebar at 150mm depth
85
-
-
12mm dia rebar at 180mm depth
110
-
-
16mm dia rebar at 240mm depth
125
-
-
20mm dia rebar at 300mm depth
112
-
-
25mm dia rebar at 375mm depth
65
-
-
Providing and placing non shrink grout at Manhole with 40% pre gravel aggregate,where Non shrink grout- NS GROUT of EUCLID Chemicals, which is designed for critical use where high strength, non-staining characteristics and positive expansion are required. It contains only natural aggregate and an expansive cementitious binder. It is extremely flowable, Flow Rate as per ASTM C939/CRD C621 is 120%, Expansion as per CRD C621 is 0.02% in 3days. Product shall conform to CRD C621, US Army Corps of Engineers Specification for Non-Shrink Grout and ASTM C1107, Standard Specification for Packaged, Dry, Hydraulic-Cement Grout (non-shrink). The placing and application of Mix grout in accordance with manufacturer’s written instructions and as per the direction of the Engineer-in-charge.
45
-
-
Providing and mixing integral crystalline admixture for waterproofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (DSR NO.-22.22)
325
-
-
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.(DSR NO.-22.22A)
135
-
-
Providing and fixing Drain board of any branded organization as protection board for waterproofing which is high strength one side dimpled structure, light in weight yet flexible strong and resilient. It is High Density Polyethylene (HDPE) draining system with 8 mm dimples, It is mainly used for, vertical / horizontal to protects the main waterproofing layer. (Considered-10% overlaps).
135
-
-
Providing and applying integral crystalline dry shake of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @ 0.60kg per sqm or higher as recommended by the manufacturer's specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dry-shake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10
years against any leakage.(DSR 22.24)
45
-
-
(Equipment Items Part-III)
Drain grille in SS 304. 500mm x 500mm. Flow: 136m3/hr. Make: Astral, Hayward, Techpool
4
-
-
Suction inlet in ABS with cap internal thread of 1 1/2" dia. and external thread 2". Make: Astral, Hayward, Techpool
18
-
-
ABS wall conduits 300 mm long. Make: Astral, Hayward, Techpool
18
-
-
White ABS plastic bottom inlet for concrete with S.S. screws. and regulable flow. Max. Flow/ inlet = 9,000l/hr. Make : Astral
100
-
-
Overflow gutter drain fitting with body and grille in ABS and Make: Astral, Hayward, Techpool
36
-
-
"MIXED" model stainless steel AISI-304 ladders, width: 500mm, handrails dia 43mm stainless steel non-slip steps, provided with electrical earthing connection and anchoring fixtures. No. of treads - 3. Make: Astral, Hayward, Techpool
6
-
-
"MIXED" model stainless steel AISI-304 ladders, width: 500mm, handrails dia 43mm stainless steel non-slip steps, provided with electrical earthing connection and anchoring fixtures. No. of treads - 5.Make: Astral, Hayward, Techpool
4
-
-
Overflow Gratings, Made in white, U.V. Stabilized PP. Running Length :102 m, Width: 295 mm, Height : 35mm. Price / unit. 1m=45 units. Make: Astral, Hayward, Techpool.
6900
-
-
Grating Support Profile, Made in plastic. Suitable for 22, 24 and 35mm high grating, Supplied in 2 m length. Make: Astral, Hayward, Techpool
153
-
-
CONTROL and REGULATORY VALVES. Make:CEPEX
Ball Valve dia 50 mm
2
-
-
Butterfly Valve Dia 110 mm
21
-
-
Flange and Adaptor for 110 mm.
42
-
-
Butterfly Valve dia 140 mm
5
-
-
Flange and Adaptor for 140 mm.
10
-
-
Ball Valve Dia 63 mm
2
-
-
Butterfly Valve Dia 160 mm
18
-
-
Flange and Adaptor for 160 mm.
36
-
-
Wafer Check Valve Dia 110 mm
7
-
-
Flange and Adaptor for 110 mm.
14
-
-
Wafer Check Valve Dia 160 mm
5
-
-
Flange and Adaptor for 160 mm.
10
-
-
Metallic Vac -Head 800mm - with 2" connection and trailing cable. Make: Astral, Hayward, Techpool
2
-
-
Extensible handles for cleaning attachments in anodized aluminium which can be adapted to the entire range of cleaning equipment, brushes, leaf skimmers and scoops.10.0mts. With handle adapter. Make: Astral, Hayward, Techpool
2
-
-
Transparent blue plastic vacuum hose 2" dia 30mtrs long including hose cuffs for connection to suction inlets. Make: Astral, Hayward, Techpool
2
-
-
Deep bag net made in polypropelene and white polyester netting, Shark. Make: Astral, Hayward, Techpool
2
-
-
Surface net made in polypropelene and white polyester netting Shark. Make: Astral, Hayward, Techpool
2
-
-
Curved brushes made in polypropelene for pool basins and scum liners. Shark Make: Astral, Hayward, Techpool
2
-
-
Straight brushes made in polypropelene for pool basins and scum liners, Shark.Make: Astral, Hayward, Techpool
2
-
-
Algae brushes with stainless steel bristles. Make: Astral, Hayward, Techpool
2
-
-
Test kit for free chlorine & pH. Make: Astral, Hayward, Techpool
4
-
-
Media in Kg
25000
-
-
Lifeguard Chairs Made in Stainless Steel AISI-304. With dismountable base plate. Steps, Platform, chair, including parasol holder made of polypropylene fibre-glass. Make: Astral, Hayward, Techpool
2
-
-
Starting blocks, Supply of Blocks for competition pools, Non adjustable platform in polyester and fibreglass with non-slip finish 500x500mm. Polished finish with height : 400mm Sequence number and fixings not included. Make: Astral, Hayward, Techpool.
13
-
-
Anchoring for installation is concrete, made in SS 316. Make: Astral, Hayward, Techpool
13
-
-
Float lines, Supply and installation of float lines supplied with floats and nylon rope. Length : 50m.
18
-
-
Float lines, Supply and installation of float lines supplied with floats and nylon rope. Length : 25m.
9
-
-
Float Line anchors made in S.S.-316. Make: Astral, Hayward, Techpool
36
-
-
Float Line Flange anchoring Socket made in S.S.-316. Make: Astral, Hayward, Techpool
36
-
-
Lane Hook. Make: Astral, Hayward, Techpool
18
-
-
Float Line roller Made of S.S.-304. Mounted on 4 rotating wheels for maximum mobility and transport. 1.2m width. Make: Astral, Hayward, Techpool
6
-
-
False start indicators comprise of 2 posts in S.S-316 (line with pulley and quick release cord). Height : 1.8m. Make: Astral, Hayward, Techpool
2
-
-
False start floats includes polyester cord and float 25 m. Make: Astral, Hayward, Techpool
1
-
-
False start floats includes polyester cord and float 13 m. Make: Astral, Hayward, Techpool
1
-
-
Level anchor fixing in S.S.-316. Make: Astral, Hayward, Techpool
4
-
-
Backstroke turn indicators comprise of 4 posts in S.S-316. Make: Astral, Hayward, Techpool
2
-
-
Backstroke turn indicator bunting. 2 polyester cord and bunting 25 m. Make: Astral, Hayward, Techpool
1
-
-
Backstroke turn indicator bunting. 2 polyester cord and bunting 13m. Make: Astral, Hayward, Techpool
1
-
-
Level anchor fixing in S.S.-316. Make: Astral, Hayward, Techpool
8
-
-
Life Buoys. Make: Astral, Hayward, Techpool
4
-
-
Lifeguard Loop. Make: Astral, Hayward, Techpool
2
-
-
P.H. WORKS Part -IV
P.H. WORK ITEMS Excavation for pipelines running under pressure In trenches and pits, in open areas, where disposal, Of surplus earth is done along with the alignment Including trimming & dressing sides, leveling of beds of trenches to Correct grade, cutting joint holes, cutting trees and bushes, etc., Refilling consolidation and watering of refill in 15 cm layers and Restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain Water, diversion of traffic, night signals, fixing caution boards, watching, Fencing etc., and outside the town in ordinary soil:- Without timbering and shorting upto 1.5 meters depth (HSR-6.8)
3210
-
-
Cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR-10.41)
125
-
-
Labour for fixing G.I or W.I pipe sleeve pieces in holes in walls, floors, and roofs rounds pipes including all cutting and wastage.(HSR-28.27)
(i) 15mm internal diameter of sleeve pipe
25
-
-
20mm internal diameter of sleeve pipe
40
-
-
25mm internal diameter of sleeve pipe
55
-
-
Bailing out water from the trenches for making new connections in fully charged pipe lines including cleaning, rimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. Upto 200mm I.d. (HSR-28.47)
1
-
-
Constructing Brick Masonry Inspection Chamber sizes as given below upto 0.60 meter average depth in cement Mortar 1:5 lime Concrete with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 Benching 12 mm thick cement Plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 SLAB 100 mm thick/cc/topping 50 mm thick with 455 MM x 455 MM X 610MM inside light duty C.I. Inspection Chamber cover and frame Weight as per I.SI. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. Size 600 mm x 900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping ) (HSR-29.84)
45
-
-
Constructing Brick Masonry road gully chambers as per standard drawings (as per size given below) including dressing of beds and sides of chamber to exact profiles. 15 CM thick lime concrete 16:24:100(as per specified in item no. 10.6) in foundation 1st class brick work laid in cement sand mortar 1:5 40 MM thick cement concrete 1:2:4 topping inside the Chamber with a floating coat of 1.5 MM thick cement laid in one operating to the topping the entire inner surface of The Chamber rendered with neat cement not less than 12 mm in thickness of 1:2 Cement Sand Plaster and finished with a floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I road gully grating and frame including painting with coal tar (as specified in item no.29.48 complete and to the requirement of the Engineer-in-charge. Single Road Gully Chamber, Size 610mmx457mmx800mm (HSR-29.87)
12
-
-
Providing and fixing in position best Indian make chromium Plated brass Bottle trap 32 mm dia meter. (HSR-30.50) of Jaquar or Equivalent Make.
20
-
-
Providing and fixing in position best Indian make towel rails fixed in with raw slugs embedded in walls with C.P Brass screws, complete in all respect including cutting and making goods the walls etc. as fully described in Item No. 30.41. 600mm long (25 MM DIA ALUMINIUM)(HSR-30.68)
22
-
-
Providing and fixing in position glass shelf fixed in with rawl plugs with C.P brass screws complete including cutting and making good the walls etc. as fully described in Item No. 30.41. Vitreous chinaware shelf 560mm long i) white. (HSR-30.69)
12
-
-
Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etc. Vitreous china ware white Soap Dish 380 mm (HSR-30.70)
20
-
-
Providing and fixing in position best Indian make Bevelled Edge 5.5 MM thick mirror Mounted on Asbestos sheet ground fixed in position by means of 4 Nos. Chromium Plated brass screws and washers] over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) Complete including cutting and making good the walls etc. 600 X450 mm (HSR-30.71)
15
-
-
Providing and fixing in position C.P brass stop cocks JAGUAR ONLY . (HSR-30.76)
(i) 15 MM STOP COCK - Concealed stop cock with flange
12
-
-
20 MM STOP COCK - Stop cock with flange
16
-
-
Providing and fixing in position best Indian make flexible tube connection C.P brass i) 15mmx300mm. (HSR-30.82)
52
-
-
Providing and fixing in position M. S. or heavy flat Iron Clamps made out of M.S flat not less than 5 mm of the approved design for fixing Soil waste Vent or anti pipes to walls Complete in all respects including cutting and making good the walls and floors etc., and painting. For 100 mm internal diameter pipes (HSR-30.88) Two Clamps on every 2.0m length for Soil, Waste, & Rain Water Pipes.
16
-
-
Cutting chase in brick walls in cement or in floor for embedding G.I or HCI pipe lines and making good the same to its original condition (HSR-30.95)
(i) Size 150 mm x 150 mm
75
-
-
Size 225 mm x 225 mm
128
-
-
Providing and fixing in position automatic brass ball valves in tanks with Copper Ball 40mm internal dia. (HSR-30.110)
(i) 32 mm internal diameter
4
-
-
40 mm internal diameter
4
-
-
Providing and fixing HDPE Water Storage Tanks of Sintex , Dip last , O.k. Supreme make with cover/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position , making connections with inlet and outlet pipes , providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples ,washers, flanges for connections in tanks complete in respect to satisfaction of Engineer-in-charge.(Except civil work) (HSR 30.119) (i) 5000 Ltr. Capacity
4
-
-
PH WORK N.S ITEMS :-
P.H. WORKS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. DSR Item No. 18.8
(i) 15mm internal diameter of pipeline
25
-
-
20 mm internal diameter of pipeline
40
-
-
25 mm internal diameter of pipeline
55
-
-
32 mm internal diameter of pipeline
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work.DSR Item No. 18.12
(i) 40 mm dia nominal bore
12
-
-
50 mm dia nominal bore
20
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. DSR Item No.18.12. External Work (i) 25 mm internal diameter of pipeline
12
-
-
32mm internal diameter of pipeline
12
-
-
Providing, Laying, SWR quick fit pipes, single socket (Supreme Make) Type-B, as per IS 12592-1992, including all fittings, cutting, jointing an testing etc. complete in all respect to the satisfaction of Architect/Engineer-in-Charge.
(i) 110mm dia. Internal diameter
22
-
-
160mm dia. Internal diameter
225
-
-
200mm dia. Internal diameter
240
-
-
250mm dia. Internal diameter
92
-
-
Providing, laying, jointing and testing uPVC quick fit pipes, conforming to IS 4985:2000 of supreme make or approved by Engineer-in-Charge. Including all kind of special IS 4985-2000 (N.S ITEM)
(i) 65mm
16
-
-
100mm
75
-
-
150mm
130
-
-
Total plumbing required for the Swimming Pool in uPVC pipe (06 / 10 Kg Pressure) including Fitting(Tee,Elbow, Socket, Solvent, Bush, etc (excluding inlet and drain). Make Supreme/ Finolex
65mm dia. in mtrs(10Kg)
150
-
-
110mm dia.in mtrs(10Kg)
360
-
-
160mm dia. In mtrs(10Kg)
960
-
-
200mm dia. In mtrs(6Kg)
510
-
-
Providing and fixing in position Bib cock with wall flange (model CQT-23047) of Jaquar make o or equivalent with prior approval of Engineerin charge. (N.S ITEM)
12
-
-
Providing & fixing Hand shower (Health faucet) with 1.0m long easy flex tube in chrome finish & wall hook (model no. ALD-565) Jaquar or equivalent with prior approval of Engineerin charge.
15
-
-
Providing and fixing in position two way Bib cock for and hand shower (model CON-041KN) of Jaquar make o or equivalent with prior approval of Engineerin charge. (N.S ITEM)
15
-
-
Providing and fixing in position Angle Valve (model No.CON-059KN) of Jaquar make or approved by Engineer-in-Charge. (N.S ITEM)
56
-
-
Providing and fixing in position European Type Floor Mounted Water Closet (white) Suit of size(mm), (model (No . CNS-WHT-755SN + CNS-WHT-207 of Jaquar make or equivalent as per prior approval of Engineer-in-Charge. (N.S ITEM), complete in all respects
15
-
-
Providing & fixing under counter Basin (model No. CNS-WHT-705) of Jaquar make or equivalent as per prior approval of Engineer-in-Charge., complete in all respect. (NS Item)
15
-
-
Providing & fixing Pillar Cock long neck with Aerator (model No. CQT -23021) of Jaquar make or equivalent as per prior approval of Engineer-in-Charge., complete in all respect. (NS Item)
15
-
-
Providing and fixing floor drain with jali (pp) as per I.S:14735:1999 marked of Supreme pipes or equivalent with prior approval of Engineerin charge. (N.S ITEM)
8
-
-
Providing and fixing in position Long body Bib cock with wall flange (model no.CON-107KN) of of Jaquar make or equivalent with prior approval of Engineerin charge (N.S ITEM)
8
-
-
RODAS 1200 mm dia horizontal filter 160mm dia connection. 2700mm length; flow: 115m3/hr@40m3/hr/m2; Filter bed: 0.6m. Make : Astral, Hayward, Techpool.
5
-
-
Valve Battery Manifold made in PVC with flanges for connecting 5 - buttterfly valves for carrying out filtration, back-washing, rinsing and shut down of the filters. Size : 160mm. Make: Astral, Hayward, Techpool
5
-
-
Valve battery supports made in Zinc Plated Steel.Height : 2.30m. Make: Astral, Hayward, Techpool
10
-
-
2 Support Brackets with anti-vortex clamps and fixing screws. Make: Astral, Hayward, Techpool
10
-
-
Centrifugal Cast Iron Pumps 3000 r.p.m. Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel AISI-420 shaft. With stainless steel AISI-316 strainer basket. Conn. PN-16 according to DIN2501. Flowrate : 123m3/h 10 HP Voltage 400V/ 3 ph. (4 working and 1 standby). Make: Astral, Hayward, Techpool
7
-
-
Membrane Dosing Pumps "EXACTUS" model. Electronic dosing pump to be mounted both on its base as well as hung on the wall. Pumps following CE regulations. IP- 65 protection. Power connections : 220/240V, 50/60 Hz. The materials in contact with liquid are : Ploypropylene, Viton, Teflon and PVC. Includes anti-acid plastic case. Operating panel protection provided by a transparent polycarbonate cover. Lubrication not required. Flow 20l/hr @ 5 bar. Make: Astral, Hayward, Techpool
9
-
-
Semi transparent polyethelene tank with external scale so that levels can be checked easily, capacity of tank 500lts. Make: Sintex
9
-
-
Agitators for easy installation in the tanks, provided with steering grip in bakelite, rod and propellor arms in PVC, length of stirring rod 900mm. Make: Astral, Hayward, Techpool
9
-
-
(Electrical work Part -V)
HSR SCHEDULE ITEMS (HSR No.31.36) (i)
Wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe. Fan Point .
a) Short Point
7
-
-
b) Medium Point
9
-
-
a) Long Point
9
-
-
Light Point . 31.36(ii)
a) Short Point
31
-
-
b) Medium Point
32
-
-
a) Long Point
45
-
-
Light Point without control. 31.36(iv)
a) Short Point
32
-
-
b) Medium Point
27
-
-
a) Long Point
25
-
-
Call bell point including MS box of size 180mmx100mmx60mm deep for call bell . 31.36(vi)
a) Short Point
1
-
-
b) Medium Point
1
-
-
a) Long Point
1
-
-
(HSR NO. 31.18 (vii)) Call bell 220 / 230 volts A.C. bakelite with double coil.
3
-
-
3-pin 5 amp. Plug point including earthing the 3rd. pin etc. HSR No. 31.36(vii)
a) Short Point
4
-
-
b) Medium Point
8
-
-
c) Long point.
8
-
-
3-pin 15 amp. Plug point including earthing the 3rd. Pin etc. with 4 sqmm PVC insulated copper conductor cable.. HSR No. 31.36(viii)
a) Short point
2
-
-
a) Short Point
2
-
-
b) Medium Point
14
-
-
b) Medium Point
14
-
-
c)) Long Point
16
-
-
Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.
Make - Havells. Polycab & Standerd HSR No.31. 40 (i) Cable size 1.5 sqmm. ( 3/0.81mm ) .
1200
-
-
Cable size 2.5 sqmm. ( 3/1.05mm ) . 31.40 (ii)
890
-
-
Cable size 4 sqmm. ( 7/0.85mm ) .31.40 (iii)
600
-
-
Cable size 6 sqmm. ( 7/1.05mm ).31.40 (iv)
200
-
-
Cable size 10 sqmm. ( 7/1.35mm ). 31.40 (v)
230
-
-
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect.
Make - Anchor
(i) 10 amp. 1 way switch (HSR NO. 31.56)
128
-
-
10 amp. 2 way switch, 31.56 (ii)
1
-
-
20 amp. Switch, 31.56 (iii)
32
-
-
10 amp. Socket, 31.56 (iv)
20
-
-
16 amp. Socket, 31.56 (v)
32
-
-
Fan Regulator, 31.56 (vii)
13
-
-
Blanking plate., 31.56 (ix)
16
-
-
Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. (HSR No, 31.57)
(i) 1 & 2 Modules
8
-
-
3 Modules, 31.57 (ii)
36
-
-
4 Modules, 31.57 (iii)
16
-
-
6 Modules, 31.57 (iv)
8
-
-
8 Modules, 31.57 (v)
5
-
-
12 Modules, 31.57 (vi)
2
-
-
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. Make - Havells, Standerd, Indo Asian, C&S Electric
(iii) 12-way ,SP&N (Horizontal) . HSR NO. 31.41
2
-
-
8-way , TP&N ( Horizontal) (8+24) (31.41 (vi))
1
-
-
12-way , TP&N ( Horizontal) (8+36) (31.41 (vii))
2
-
-
Supply and erection of sheet steel enclosure 3/4 pole for ELCB / MCB , fixed on wall / existing board etc. including bonding to earth complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. (HSR NO. 31.46)
Make - Havells, Standerd, Indo Asian, C&S Electric
1
-
-
Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (HSR No.31.69)
iv 4 pole MCCB 6 amp to 63 amp -- 63 A
4
-
-
4 pole MCCB 100 amp (v)
1
-
-
4 pole MCCB 200 amp (vi)
1
-
-
4 pole MCCB 300 amp to 400 amp (vii)
1
-
-
Supply and erection Double pole / Four pole Residual Current Circuit Breaker ( RCCB/ELCB) suitable for operation on 240 / 415V , 50 Hz. AC supply installed in existing sheet steel enclosure including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entiresatisfaction of the Engineer-in-charge of the work. (HSR No.31.42)
Make - Havells, Standerd, Indo Asian, C&S Electric
31.42 (viii) 40/240V DP ELCB 100 MA sensitivity.
3
-
-
63/240V DP ELCB 100 MA sensitivity. HSR No. 31.42 (x)
6
-
-
Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections.
Make - Havells, Standerd, Indo Asian, C&S Electric (HSR NO. 31.17)
(a) Miniature circuit breakers of 9 KA breaking capacity.
31.17a) (ii) SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.
78
-
-
TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. (31.17(a) (iii))
1
-
-
Blanking sheet . (HSR NO. 31.16)
(i) Supply and erection of blanking sheet in existing distribution board.
16
-
-
(HSR NO. 31.45) Supply and erection of copper lugs including crimping etc.upto the entire satisfaction of Engineer-in-charge of work. 31.45 (i) Size 1.5 sqmm to 2.5 sqmm
150
-
-
Size 4 sqmm to 6 sqmm (31.45 (ii))
200
-
-
Size 10 sqmm (31.45 (iii))
40
-
-
Size 16 sqmm (31.45 (iv))
4
-
-
Earthing (HSR N o.31.22(i))
Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .
2
-
-
Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)
2
-
-
Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . 31.22(xvi)
142
-
-
Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)
20
-
-
Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . 31.22(xii)
50
-
-
EARTHING COPPER ITEMS (HSR NO. 31.22(iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) etc. comlete as equired.
4
-
-
Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)
4
-
-
Pdg. Standard watering tank including down pipe and C.I. cover with locking arrangement etc. (HSR NO.31.23 (v))
4
-
-
Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(x)
40
-
-
Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xiv)
60
-
-
Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . 31.22(xvi)
200
-
-
Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . (HSR NO. 31.26)
Make - Havells, Polycab 31.26 (xxxix) Ard. 10 Sq. mm 4 Core Cable .
40
-
-
16 Sq. mm 4 Core Cable . (31.26 (xI) Ard.)
250
-
-
95 Sq. mm 3.5 Core Cable . (31.26 (xxix) Ard.)
35
-
-
Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. (HSR NO. 31.35 (ix) )
31.35 (ix) (c) 10 sqmm .
8
-
-
16 sqmm . (31.35 (ix) (d) )
24
-
-
95 sqmm . (31.35 (ix) (I)
8
-
-
(HSR NO. 31.28) Supply and erection of suitable compression type brass cable glands for underground Cable. 31.28 (ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .
8
-
-
70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . (31.28(iv))
2
-
-
Supply installation testing and commissioning of wall / free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet, required hardware, 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel, dully painted by 2 coat of zinc / Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU / Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate MS base channel, hinged door with inter locking arrangement for equipment / switch gear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3mm thick for separately cable alley to BBC from switch chember. Extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection. (only outer area on all sides shall be measured). Size 1800x1300x450mm deep.
a. Main LT Panel 2800*2300*1000 (HSR NO. 31.63)
10.42
-
-
Supplying and fixing of Copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending , cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation Complete in all respect.
a. Main LT Panel (HSR. NO. 31.64)
6.052
-
-
Pdg. and fixing digital metering equipment for LT cubical Panel consisting of 96mmx96mm 0-500V, volt meter with selector switch, Amp. meter (of required ratio up to 600/5 amp.) with selector switch and required C.Ts 3 Nos., a set of 3 no phase indicating lamps RYB LED.
a. Main LT Panel (HSR NO. 31.65)
1
-
-
Supply & fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect.
(i) up to 125A MCCB (HSR NO. 31.66)
5
-
-
Above 125A MCCB ((ii))
2
-
-
Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Make - BFC, NIL, Steelkraft (HSR NO. 31.21) 31.21 (xv) Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness on surface.
120
-
-
Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. 31.21 (xxi)
240
-
-
Heavy guage welded conduit pipe 32 mm dia 1.60 mm thickness flushed. 31.21 (xxiii)
30
-
-
Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. Make - Polypack, Atral (HSR NO. 31.44)
31.44 (i) 20 mm dia.
200
-
-
25 mm dia. (31.44 (ii))
250
-
-
Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of work. (HSR NO. 31.58)
31.58 (i) PVC pipe of 32mm dia
40
-
-
PVC pipe of 40mm dia (31.58 (ii))
24
-
-
S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work
(ii) HDPE pipe 90 / 75mm outer dia / inner dia. (HSR NO. 31.67)
200
-
-
HDPE pipe 145 / 123mm outer dia / inner dia. (iii)
40
-
-
Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and shealed in existing pipe/Channel and making necessary connection complete in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.
Make Havells, Polycab, RR Cable, Finolex i 2 pair telephone wire (HSR NO.31.78)
200
-
-
Telephone Point Outlet RJ 11-- Mod Legrand
3
-
-
Supply and erection of 1x18 watt LED CRCA box type tube light batten for T-B tube light including the erection of LED tube rod 4 feet long 18 watt Philips. Bajaj/ Havells make T-8 LED tube 4 feet lenth of full polycarbonate housing with integral driver 18 watt, lumen output 2100 lumens, Led life-50000 hrs, SPD-4KVA.
63
-
-
Supply and erectionof IP20 2'x2'LED false ceiling fitting 36 watt, lumens output 4400, LED life-50000 hours, SPD-2.5 KVA Make- Havells, Philips, Bajaj complete as per satisfaction of Engineering-in -Charge of work.
30
-
-
Supply, installation, testing and Commissioning of IP 44 12W LED recessed mounting circular LED Down Light luminaire with die-cast aluminium housing in white powder coating finish, anti-glare diffuser, Minimun System Lumen 1250Lumen, CRI 80, 120 Deg Beam angle,input Voltage: AC220-240V , 50-60 Hz, Operation voltage range 100-300V, high performance electronic driver ensure Zero Maintenance, High surge protection 2.5 KV, Average life L70B50 50000hrs, operating temperature:- 10 C to + 45 C Make - Philips, Bajaj, Havells
74
-
-
Supply, installation, testing and Commissioning of IP 20 18W LED recessed mounting circular LED Down Light luminaire with die-cast aluminium housing in white powder coating finish, anti-glare diffuser, Minimun System Lumen 1620 Lumen, CRI 80, 120 Deg Beam angle,input Voltage: AC220-240V , 50-60 Hz, Operation voltage range 100-300V, high performance electronic driver ensure Zero Maintenance, High surge protection 2.5 KV, Average life L70B50 50000hrs, operating temperature:- 10 C to + 45 C Make - Philips, Bajaj, Havells
6
-
-
Supply, installation, testing and Commissioning of IP 66 IK-10, 10 Watt LED Bulkhead Minimun System Lumen 650 Lumen, CRI 80, 120 Deg Beam Angle, Input Voltage : AC220-240V, 50/60Hz, Operating voltage range 100-300V, High Performance electronic driver ensure Zero Maintenance, High Surge Protection 4KV, Average Life L70B50 50000 hrs, Operating Temperature : -10°C to +45°C. Make - Philips, Bajaj, Havells.
29
-
-
Supply and erection of AC ceiling fan 48'' Orient make Summer Cool model with necessary earthing, regulator and downrod as per site requirement complete in all respect as per satisfaction of Engineering -in-charge of work.
14
-
-
Supply and erection of Exhaust Fan Heavy duty Orient make of size 15'' by making suitable hole in wall upto 450mm sweep including finishing the same and fixing wire mesh duly fixed with deodar wood frame of section 40mm X 25mm thick or fixing of louver shutter of required size as per site requirement complete in all respect as per satisfaction of Engineer-in-charge of work.
11
-
-
Supply of Cables in meter With Conduit And Cable Tray. Make Polycab & RR Cables, Havells Cable Size : 6 sq.mm Two Core
800
-
-
Cable Size : 6 sq.mm Two Core
150
-
-
Providing, fixing, testing & commissioning of Control Panel (Equipments Make-L & T, Hager,C&S Electric, Elmex, Rishabh, FTC, Esbee, Salzer etc.)
Supply, installation, testing & commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Cadimium plated
hardware shall be used in fabrication of panels.
MCC –1 (Swimming Pool)
Incoming:
200 amps TPN MCCB with the following accessories:
a. 0-500 volts 96 x 96 mm square digital electronic voltmeter with selector switch through 415 V/ Ö : 3 110 V/ Ö 3 PT primary and secondary of PT’s shall be protected by 2 amps TP MCB. 1 Set
b. 0-160 amps 96 x 96 mm square digital electronic ammeter with selector switch and 160/5 amps 15 VA CL:1 CTs. 1 Set
c. Phase indicating lamps through 415/110 V PT primary & secondary of PT’s shall be protected by 2 amp SP MCB 3 Sets
Bus Bar:
200 amps TPN (25 KA) aluminium bus bar with heat shrinkable
Outgoings:
7 Nos. star delta starter and outgoing feeder to swimming pool recirculation pumps of 10 HP. Each compartment shall contain CT operated digital electronic ammeter of 0-40 amps range with auto/manual selector switch and indicating lamps with MCB’s and ‘ON/OFF/TRIP’ status of motor.
9 Nos. 6 Amp, TPN MCB for Dosing Pumps.
40amps TPN MCB 2 No Spare MCCB’s of following capacities:
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements