Government Of Haryana Tender

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded. {HSR 10.114}

First class brick work laid in cement sand mortar 1:5 in foundation and plinth. (HSR 11.3)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

Conglomerate floor 40 mm thick cement concrete topping 1:2:4 (HSR 14.9)

12 mm thick cement plaster 1:3 (HSR 15.4)

15 mm thick cement plaster 1:2 on the rough side of single or half brick wall (HSR 15.8)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 16.3)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (HSR 16.9)

Wrought iron and mild steel (using angles, flats square bars. tees and channels) ladders, grills, gratting frames, window guards, iron door openable or fixed stair case or parapet or any other type of railing , gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12)

Supplying G.I. pipes class B marked with IS 1239 in 3.05 M length, their threading and welding with flanges (Heavy duty) on both sides, jointing with nuts and bolts marked with IS:1363, rubber gaskets, marked with IS:638 jointing with pumping machinery and lowering into tubewells and testing including carriage, loading, unloading etc., complete in all respects to the satisfaction of Engineer-in-Charge.100mm i/dia( HSR 28.52)

Main Switch Supply and erection of metal clad switches/ B.D.B.S. with rag bolts on wall or on existing angle iron board/ pedestal including bonding to earth and necessary connections :- (xiv)Triple pole switch with neutral link 32 amp. 415 volts. (HSR31.12 (a) (xiv)(cat-B)

Earthing. (HSR 31.22[i]) (i) Earthing with G.I. earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. as required

(xii) Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required (HSR 31.22 (xii)

Supply and erection of Godrej Almirah type M.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size of make it water proof. The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and it’s legs are embeded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of work- (iii) M.S. pedestal of size 750 mm wide, 1200 mm high and 300 mm deep and bottom totally open, duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster, having a base of size 1050 mm x 600 mm x 250 mm below ground level. (HSR 31.33)

Supplying & jointing three core flat cables of Finolex, Polycab, Ecao & Bunton with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors with voltage grade 1100 volts marked with IS:694:1990 including cost of jointing materials as well as carriage, loading, unloading etc., complete in all respects to the satisfaction of Engineer-in-Charge. (HSR 31.59) 2.5 square mm (copper)

10 square mm (copper)

Boring of well 10" dia size upto 450 feet deep (suitable for 9" dia PVC pipe) with suitable system, complete in all respect as per directions of the Engineer-in-Charge.(NS)

Providing and fixing in positon PVC Pipe (socketed) of 9" i/d size 10kg/cm2 pressure in borewall, complete in all respects. Make-Ravindra/ Finolex/ Prince/ Supreme. (NS)

Labour for making holes of size 12mm to 15 mm in the PVC pipe of 9" i/dia size of 10kg/cm2 pressure upto 200 Rft length (to make the pipe perforated), complete in all respect.(as per required) (NS)

Providing and fixing in position PVC End Cap for 9" i/d PVC pipe 10kg/cm2 pressure complete in all respects of Prince/Supreme/Finolex Make. (NS)

Providing and fixing of PVC filter jali along with PVC dhaga etc. (on PVC perforated pipe) for making filter of best quality, complete in all respects. {NS}

Providing and fixing in position copper revits of best quality, complete in all respects. {NS}

Providing and fixing in position 30 HP capacity three phase three stages submersible pumping set with 4" delivery, complete in all respects as per direction of the Engineer-in-Charge. Make- KSB/Lubi or equivalent as approved by the Engineer-in-charge. {NS}

Providing and fixing Panel Board suitable for 30 HP capacity submersible pumping set consisting of all required items like amp. metre, volt metre, starter & wires for connections etc. of L&T / Havells, Make, complete in all respects. {NS}

Providing and fixing Base Plate (Heavy duty) of required shape and size for PVC Pipe/ Tubewall. (NS)

Providing and fixing G.I. Bend 100 mm i/dia size alongwith two G.I. Flanges, rubber joints, nuts & bolts of required sizes of best quality, complete in all respect.(to be fixed with the G.I. Pipe) (NS)

Providing and fixing insulated copper wire 7/16 mm of best quality for connection in Pannel board. Make:- R.R/ Kent, complete in all respecct.(NS)

Development of tubewell for atleast 12 hours (or till develop the cavity) by using suitable engine/system complete in all respect to satisfication of Engineer- In-charge.(NS)

Boring of well 6" dia size upto 400 feet deep (suitable for 5" dia PVC pipe) with suitable boring system, complete in all respect as per directions of the Engineer-in-Charge.(NS)

Supply, loweing, fixing & jointing PVC blind Pipe 5" internal dia size of 6kg/cm2 pressure of Prince/ Supreme/Ravindra/Finolex make complete in all respect. (NS)

Supply, loweing, fixing & jointing PVC slotter/ perforated Pipe 5" internal dia size of 6kg/cm2 pressure of Prince/ Supreme/Ravindra/Finolex make complete in all respect. (NS)

Providing and fixing and jointing G.I Pipe 'B' class ISI mark 40 mm i/dia size of Ravidra/ Jindal / Parkash (Surya) make for delievery. (NS)

Providing and fixing 2.0 HP capacity submersible Motor/ Pump set single phase of KSB/Kirloskar/Cromption make alongwith starter of suitable capacity of L&T make, complete in all respect.(NS)

Development of tubewell for atleast 12 hours (or till develop of cavity) for 6"dia bore with suitable engine/system complete to the satisfication of the Engineer Incharge. complete in all resspect.(NS)

Providing and fixing MS clamp (Heavy duty) of best quality complete in all respect. (a) For 40 mm dia size

(b) For 5" i/dia size pipe

Providing and fixing Volt Metre 0 to 500 Volts of L& T/Havells make complete in all respecst.

Providing and fixing Ampere Metre 0 to 50 ampere of L& T/Havells make complete in all respecst

Providng and fixing G.I bend of 40 mm i/dia size of Unik/unco make, complete in all respect.