Directorate Of Urban Local Bodies Tender

Interlocking Paver Block M 35, 60 mm thick (Colour)

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors open able or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position.

Applying priming coat with metal primer on new steel or iron work including preparation of surface. Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade.

12 mm thick cement plaster 1:4

15 mm thick cement plaster 1:4

Providing & laying of Grass Carpet (N.S)

P/Fixing Pre-cast benches (N.S)

The lever of see saw shall be made from 80 mm NB ‘ GI pipe. The seat of see saw shall be made from FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) 2 -3 thickness. The lever shall be fitted on 50 mm GI pipe and bush bearing shall be made from seamless pipe fitted in 80 mm NB GI pipe. See saw lever shall be welded with 150 x 150 x 5 mm MS plate for nut bolting with stand. All parts to be powder coated with minimum thickness of 40 microns uniformly and then fixed in cement concrete blocks of required size and mix etc complete as per drawing / sketch and direction of Engineer –in-charge at the site.

Arch Swing:- made up of GI pipe 65mm N.B . The Arch swing shall have two numbers of inverted “U” shaped M.S pipe of 65mm N.B. with 7’-6” height above natural ground level at 10 feet center to center all overall size of the Arch. Swing shall be 10’ht 7’-6” (ht. Above GL) The vertical inverted “U” shaped member shall be connected with gi pipe of 65mm N.B.at top as per drawing/design. shall be powder coated , consisting of 4 Nos. belt type swing with bearing assembling chain Zinc coated 6mm thick, butt welded , Belt seat made of frp with non skid surface . The swing shall be fixed in CC as per direction and to the entire satisfaction of Engineer in charge.

Detail of 9 Mtr LED Lights Supply and Erection Hot dip Galvanized octagnal pole of 3mm thickness with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100A. 4 Pole natural links including connection etc. with/ suitable connecting arrangement for 2 Nos. MCBs kit kat including cost of R.C.C. 1.53 for foundation of size 0.7 M x 0.7 M x 1.8 M with minumum 8 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C. for fixing thr pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. i.e. 9 Mtr. Long pole with top dia 70mm and botom dia 155mm with base plate of size 260 x 260 x 16mm.(HSR no. 31.68 (iii)

Supply and Erection of new generation Energy saving 80W LED flood light, Powder coated PDC Aluminium Body with toughened Glass visor fitted in frame. option of Secondary optical lens for superior light distribution. Efficacy 90 LM/W. AVailable CCT 6000K. IP65 etc. with the erection of same on existing pipe/Bracket with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.(N.S)

Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connections. (a) Miniature circuit breakers of 9 K.A. breaking capacity i.e. 6 amp. to 32 amp. (HSR no. 31.17 (ii)

Supply and Erection of mark double walled corrugated (DWC) HDPE, pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket/ cuppler for HDPE Pipe including the cost of labour and meterial required to complete the job in all respect up to the entire satisfaction of the Engineer incharge of the work. i.e. HDPE Pipe 63/50mm outer dia/inner dia. (HSR 31.67(i)

Supply and Erection of one Round Bracket (Ring type) suitable for fixing 6 Nos. Sodium made of 50 dia G.I. pipe on perphary and spots of 40 mm dia and with a cap of suitable size for fixing on a octagonal pole having top dia 70mm and having threads and Nuts & Bolts for fixing it. Ring dia should not be less than 4 feet. (N.S)

Supply and erection of under ground cable, loose is existing pipe or trenches complete with necessary connections i.e. 10 sqmm 2 core armoured cable. (HSR 31.26(iv)

Supply and Erection of pipe for wiring including bends inspection boxes etc. where necessary and painting as required Galvanised Iron pipe 40 mm dia on surface. (HSR 31.21 (V)

Supply and Erection of pipe for wiring including bends inspection boxes etc. where necessary and painting as required Galvanised iron pipe 50 mm dia flushed (HSR 31.21(xiii)

Earthing with G.I. earth pipe 4.5 m long and 40 mm dia with masonary enclosures on the top etc. as required. (HSR 31.22(i)

Extra for using salt and charcoal/coke for pipe earth electrode as required.(HSR 31.22(ii)

Supply and erection of sheet steel enclosures distribution boards, suitable for MCBs etc. on wall/existing, board/pedestal with rag bolts including bonding to earth:- Distribution board 2 way (HSR 31.12(d-ii)

Pdg. and fixing 4.00 mm dia G.I. wire on surface or in recess for loop earthing as required. (HSR 31.22(xvi)