Public Works Department Tender

Supply, installation, Testing & Commissioning of HD 2 MP IR Bullet/Box IR Camera. in all respect upto entire satisfaction Engineer in charge of works. Make:- Axis/Bosch/Pelco/Sony Specification:- 1.1 The 2 MP or better True Day/Night Network Bullet Camera with external/internal IR of same make of camera ,ONVIF G/S compliant. 1.2 The Network Camera shall incorporate digital signal processing (DSP) with 1/3” or 1/ 2.7” or better progressive scan CCD/CMOS/MOS sensor. 1.3 The camera lens shall be MP, IR Corrected, 1/3” or 1/ 2.8-10mm” CS Mount Megapixel 12.5-50 mm or better Vari-Focal Lens with aperture range from F/1.6 – 360, Focus range 0.4 –Infinity P-Iris with remote back focus etc. 1.4 The Network Camera shall offer wide dynamic range of 120dB or better and Digital Noise Reduction (DNR) features for real surveillance purposes under severe conditions. 1.5 The camera shall feature a Day & Night mode that may be manually or automatically engaged on low light level and permit the use of an external infrared illuminator. The camera shall incorporate independent automatic Colour to Black/White switching modes for switchover on light threshold and sensitivity to IR illumination. 1.6 The Network Camera shall offer feature to transform shadows and dark areas into natural and crisp images in real time and support intelligent features like Auto Backlight Compensation/ Adaptive Black Stretch (ABS), ATW, AWC, Gain Control and Digital Noise Reduction (DNR) etc. 1.7 The Network Camera shall support Multi process Noise Reduction (MNR) or Intelligent Digital Noise Reduction (iDNR) and 3D-DNR to ensure noise reduction in various conditions. 1.8 The Network Camera shall offer hardware-based Automatic Back Focus mechanism for adjustment through web browser or Video Management System (VMS) software. The feature shall optimally adjust delicate lens focusing automatically or manually. 1.9 The cameras shall have a minimum illumination of 0.15 lux @50 IRE in colour mode,0.01 lux @50 IRE in Black/White mode and 0 Lux with external IR. 1.10 The Network Camera shall offer Automatic Light Control to reduce the Flicker caused by fluorescent lightning, Sodium Vapour and other night time Street illumination. 1.11 The camera shall have Fog compensation function and super Chroma compensation function that shall realize a better color reproducibility even in foggy & low illumination environment. 1.12 The camera shall be able to support optional intelligent Video Motion Detection (VMD)/Analytics which provides intruder detection, loitering detection, direction detection, scene change detection, object detection and cross line detection without any external hardware required. 1.13 The Network Camera shall offer on-device intelligence like special dynamic range/Face detection feature to enhance details of human faces for better identification.

1.14 The Network Camera shall use a minimum Quad Streaming Codec capable of simultaneously generating and transmitting independent H.264 video streams at 2 MP & 50 FPS. 1.15 The network camera shall have maximum video resolution of 1,920x 1,080 resolution at 50 fps. 1.16 The Network Camera shall be capable of generating and transmitting images at 1,920 x 1,080, 1,280 x 960, 1,280 x 720, 640 x 480, 640 x 360, 320 x 240 at 50 fps or better in any of the streams. 1.17 The camera shall be able to support uni-cast and multi-cast transmission and. 1.18 The Network Camera shall provide bandwidth controls with various throughput levels or frame priority mode having Constant bitrate / VBR / Frame rate priority / Best effort / Advanced VBR functions. The Bandwidth Limit for a video stream shall be adjustable to 64 kbps to 8 mbps or better. 1.19 The camera shall have the feature to capture video on variable image qualities/resolutions i.e. higher resolution only on specified 6 areas of the image, to reduce the maximum network Bandwidth. 1.20 The camera shall feature cropping or region of Interest function which enables to provide whole image at 1080p resolution and the part of image at lower resolution simultaneously with up to 4- image capture areas which can be sequenced or Pan/Tilt/Zoom. 1.21 The camera shall support Audio input/output. The camera shall have full duplex bidirectional audio feature and be capable of transmitting and receiving the audio stream through the same Ethernet connection as the video. The audio shall be encoded using the G.726 (ADPCM standard) and G.711. 1.22 The camera shall provide Memory Card (SDXC/SDHC/SD) slot which can support a maximum of a 64 Gbytes SD card that can cache images in the event of a network failure, manual/alarm recording. The Network Camera shall also provide notification of the remaining capacity of the optional Memory Card. 1.23 The camera shall be capable of being configured to automatically transmit alarm images transfer via FTP file transfer and/or e-mail. In addition, the camera shall support the scheduled transfer of image data via FTP to an FTP server. 1.24 The camera shall support network mobile terminal compatibility with iPad, Android, iPhone and iPod Touch. 1.25 The Network Camera shall support IPv4 and Ipv6 network addressing and shall support TCP/IP, UDP/IP, HTTP, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, and SNMP protocols 1.26 The camera shall feature an alphanumeric title & Privacy Zones 1.27 The camera shall have three external I/O Terminals which can support Alarm IN/OUT or External Day/Night control or exposure out which is for external flash/IR synchronizing. 1.28 The camera shall generate a VBS 1v p-p 750 ohm PAL composite signal for local adjustment. 1.29 The power source for the camera shall be PoE (IEEE 802.3af)@125mA or 12V DC or 220V AC

1.30 The camera shall be capable of operating at an Ambient Temperature of -10 degrees C ~ +50 degrees C 1.31 All Camera must be certified to CE and UL, C-UL, FCC Safety/EMC standards. As per OEM specific. Certificates of offered model no of camera should be enclosed with technical bid and it should have complete model no. of camera, including all alphabets & number. The Same UL Certificate should be imprint/Emboss on camera itself. UL Certificate only for series cameras will not be considered. 1.32 The camera must be complying to UL/EN-61000-4-2, EN-61000-4-3 & EN-61000-4-4 guidelines/standards. 1.33 The camera shall be provided with aluminium body Outdoor IP 66 Housing (same make as of camera) with inbuilt heater, blower and sunshield etc. With suitable mountings. 1.34 IP66/IP67 as per requirement (EN60529) IR Illuminator with Die cast aluminium body, horizontal and vertical rotating mounting support in painted galvanized, steel and painted aluminium, 20 Mtr. and above for Indoor (Outdoor 30 Mtr. and above) at 850nm with 30°, SMD LED with 5 years Life Cycle, adjustable built-in photocell for automatic activation and deactivation, EN60598, EN62471, EN55022 Class A, UL/EN50130-4 Certified, Operating temperature: -50°C (-58°F)/+60°C (140°F)

Supply, installation, Testing & Commissioning of Full HD 2 MP Outdoor PTZ IP Dome camera complete in all respect upto entire satisfaction Engineer in charge of works. Make:- Axis/Bosch/Pelco/Sony Specification:- 1.1 The 30x Full HD True Day/Night PTZ Dome Network Camera shall be ONVIF G/S compliant. Camera must have processor of OEM specific with minimum 512 MB Ram on possessor & 128 MB flash. 1.2 The 30x Full HD True Day/Night PTZ Dome Network Camera shall offer an advanced 1/3” or ¼” Progressive Scan Megapixel CCD/CMOS/MOS Sensor for superior picture detail and clarity. 1.3 The Full HD PTZ Camera shall be a self-contained unitized dome camera assembly that incorporates an integral day/night camera, pan-and-tilt motor, zoom lens and network interface. The Dome assembly shall come pre-wired from the factory. The units with external pan-and-tilt motor, encoder, lens etc. will not be accepted. 1.4 The PTZ Dome Camera shall feature a dome cover with Rain Wash Coating which shall soak rain drops into surface of camera dome maintaining better view during raining conditions. In addition, stain on camera dome surface can be relatively washed away by rain or by just spraying water without wiping. If the rain-wash coating is not available then bidder should quote integrated PTZ with wiper and washer units, maintaining clear pictures in bad/rainy weathers also. 1.5 The Network Camera shall be equipped with image stabilization feature capable of electronically stabilizing the image against mechanical vibration for better image quality in rough/windy weather conditions. 1.6 The Network Camera shall produce a high quality picture with a minimum illumination of 0.3 lux @30 IRE, in colour mode or 0.01 lux @30 IRE in B/W mode or better. It shall offer IR cut filter that switches automatically to on/off, to enhance low-light or IR light sensitivity during B/W mode. 1.7 The Network Camera shall offer wide dynamic range of 120dB or better and Digital Noise Reduction (DNR) features for real surveillance purposes under severe conditions. 1.8 The Network Camera shall offer on-device intelligence like special dynamic range/Face Detection feature to enhance details of human faces for better identification. 1.9 The Network Camera shall offer automatic gain control (AGC) function and an S/N ratio of 52dB or better. 1.10 The Network Camera shall use a minimum Quad Streaming Codec capable of simultaneously generating and transmitting independent H.264 video streams at 2 MP & 25 FPS. 1.11 The Network Camera shall be capable of generating and transmitting images at 1,920 x 1,080, 1,280 x 960, 1,280 x 720, 640 x 480, 640 x 360, 320 x 240 resolutions at 25 fps

1.12 The Camera shall support uni-cast and multi-cast transmissions. 1.13 The Network Camera shall offer feature to transform shadows and dark areas into natural and crisp images in real time and support intelligent features like Auto Backlight Compensation/ Adaptive Black Stretch (ABS), ATW, AWC, Gain Control and Digital Noise Reduction (DNR) etc. 1.14 The camera shall have the feature to capture video on variable image qualities/ resolutions i.e. higher resolution only on specified 2 areas of the image, to reduce the maximum network Bandwidth. 1.15 The Network Camera shall support 3D-DNR to ensure noise reduction in various conditions. 1.16 The Network Camera shall offer a built-in digital motion detection feature with minimum four configurable areas per scene and fifteen sensitivity levels adjustments. 1.17 The Network Camera shall be capable of Advanced Auto Tracking function which track and follow a single moving target. The Advanced Auto Tracking function shall not require an external video processor to control the Network Camera. 1.18 The Network Camera shall incorporate motorized zoom lens with a focal length of 3mm to 5mm ~ 100mm to 125mm or better with automatic iris and automatic focus features. 1.19 The Network camera shall provide 30x Optical zoom in Full HD mode with continuous 12x digital zoom 1.20 The Network Camera shall offer an automatic zoom-to-window feature allowing the user to draw a box area using his mouse and the camera will automatically zoom in on that area. 1.21 The Network Camera shall offer Automatic Tracing White Balance Adjustment feature for Sodium Vapour and other night time Street illumination. 1.22 The pan-and-tilt motor shall be a high-speed unit which allows 360° endless panning with a tilt range of -0 to +180°. 1.23 The pan-and-tilt motor shall allow for preset and sequence rotation speed of approximately 300° per second or better for Panning & Tilting. 1.24 The Network Camera shall use variable manual speed control to allow for super fine pan & tilt control of 0.065° to 120°/s. 1.25 The Network Camera shall be a direct drive motor assembly. Belt-driven unitized camera units will not be acceptable. 1.26 The Network Camera shall offer a minimum of 100 preset positions and 8 privacy zones. 1.27 The Network Camera shall support an image hold capability for retaining images during preset position acquisition phase. 1.28 The Network Camera shall be able to automatically sequence through the preset positions in logical programming order (sequence mode). 1.29 The camera shall support 360° map shot/preset may shot/Guard Tours/ Patrolling etc. 1.30 The Network Camera shall be able to take snapshots of the video by clicking on an icon in the web browser. The image shall be saved as a JPEG file format. 1.31 The Network Camera shall be able to connect to a Network Time Protocol (NTP) server automatically and synchronize to the network time. The time zone shall be made selectable.

1.32 The camera shall have Fog compensation function and Sand Storm Compensation function that shall realize a better color reproducibility even in foggy and dusty environment. 1.33 Up to 15 other network cameras shall be viewable simultaneously by the user, when connected to the Internet Explorer of the Network Camera without any additional software required. 1.34 The Network Camera shall generate a VBS 1v p-p / 750hms PAL composite signal through a 3.5mm mini jack. 1.35 The Network Camera shall have built-in Audio input and output jacks for transmitting and receiving full duplex audio stream through the same Ethernet connection as the video. The audio shall be encoded using the G.726 or equivalent ADPCM standard. 1.36 The Network Camera shall have 3 external I/O Terminals which can support alarm inputs/outputs or external Day/Night controls or exposure out for external flash synchronizing. 1.37 The Network Camera shall provide a Secure Digital High Capacity (SDHC) Memory Card slot which can support up to a maximum of 32GB SDHC memory card that can cache images in the event of a network failure, manual/alarm recording. The Network Camera shall also provide notification of the remaining capacity of the SDHC Memory Card. 1.38 The Network Camera shall provide bandwidth controls with various throughput levels or frame priority mode having Constant Bit Rate and Advanced VBR 1.39 The Network Camera shall be capable of being configured to automatically transmit alarm images transfer via FTP file transfer and/or e-mail. In addition, the Network Camera shall support the scheduled transfer of image data via FTP to an FTP server. 1.40 Terminal inputs, VMD alarms, and alarm commands shall be able to trigger actions such as SDHC memory recording, FTP file transfer, e-mail notification, alarm indications on web browser, alarm terminal output, and alarm command output. 1.41 Alarm log, Manual recording log, FTP error log saved in the SDHC memory card shall be able to display on the web browser GUI and can also be downloaded to the PC. Video playback or image download from the log shall also be made available. 1.42 The Network Camera shall support Ipv4 and Ipv6 network addressing and shall support TCP/IP, UDP/IP, HTTP, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, and SNMP protocols 1.43 The power source for the Network Camera shall be IEEE802.3at (Power over Ethernet Plus, PoE+) compliant or 240VAC. 1.44 The integrated housing shall have a polycarbonate dome cover, die cast aluminium body and use tamper resistant hardware. The housing shall have a built in sunshield. The housing shall be weatherproof to IP66 & NEMA4X and IK10 rating for physical shock. The Camera shall have inbuilt Heater, Blower or Dehumidification device for use in various weather conditions. 1.45 The Network Camera shall meet the following operating conditions: Temperature : -10 to +55oC or better

Humidity : 90% or less (without condensation) 1.46 All units must be certified to CE, UL, FCC Safety & EMC standards. Certificates of offered model no of camera should be enclosed with technical bid and it should have complete model no of camera including alphabet & number. The Same UL certificate should be imprint/ emboss on camera itself. UL Certificates only for series cameras will not be considered. 1.47 The camera must be complying to UL/EN-61000-4-2, EN-61000-4-3 & EN-61000-4-4 guidelines/standards

Supply Installation Testing & Commissioning of Suitable Sever Based Network Video Recording & Management System with required Licences for all the above ONVIF Compliant Cameras. complete with all necessary required software's PC hardware ,Storage ,accessories ,civil ,electrical works & peripheral items as required as per specification & at site of work in line with the engineer in charge instructions. The System proposed should have minimum usable 30 days recording suitable hard disk as per requirement. Certifications UL hard disk complete in all respect upto entire satisfaction Engineer in charge of works. Make:- HP/Dell/IBM/ Camera OEM. Same Hardware should be upgradable upto 64 channels Processor- Intel Xeon E3 1230 or higher Speed -2.5 GHz or Higher 8 Core Cache -10 MB L3 Cache System- Bus/QPI 5 GTS/Sec Chipset -Intel C600 or better on Intel or Equivalent OEM Mother- Board Original Intel or OEM manufactured Memory-16 GB ECC DDR-IV @ 1333 MHz or higher RAM expandable upto 192 GB Hard disk Drive- 1 x 120 GB SATA/SSD OS Drives, and 28 TB SATA after raid 5/6, Audio Video/Surveillance Optimized Disk Interface :-minimum 6 Gb/s RPM Speed:- 7200 rpm Cache:-64 MB Cache, throughput- 450mbps. HDD expansion bays - Minimum 7 bays for LFF Drives and 16 Bays for LFF RAID-0,5 Video Graphics- ANVIDA Quadro K620 with 2GB or better Ports-4 USB & 1 Serial port OS Supported- Window Server 2008/ Linux/Windows 10 Ethernet Card- Quad LAN (10/100/1000) Network Card with asset feature tracking and security management, remote wake up Preloaded Software- Server Management Software and Standard Viewing, Recording, Control and Playback Software for IP Cameras. Certification- ISO 9001/9002 , FCC, UL, Windows, Red hat Warranty-1 Years Comprehensive on-site

Supply Installation Testing & Commissioning of POE 24 Port 370W, 10/100/1000 Base-T, 2 x 10G SFP+ Ports,1 x 10/100Base-T out of band management port,1 x Serial Console Port RJ-45 , Switch should support stacking up to 4 switches,Switch should have switching fabric performance of minimum 88Gbps switch fabric.Switch should have forwarding rate of 65 Mpps .Switch should have 16K MAC entries, Should support internal / external redundant PSU, Switch should have Operating temperature: (0°Cto 50°C) inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make : Extreme / Cisco / Juniper

Supply Installation Testing & Commissioning of 9U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make: HCL/Comrack/Rackom.

Supply Installation Testing & Commissioning of 22U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit Make: HCL/Comrack/Rackom.

Supply, Installation, Testing and comissioning of Camera recording and management software for cameras. software shall be ONVIF complaint inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Makes: Bosch/ Axis/ Panasonic/ Pelco

Supply Installation Testing & Commissioning of Server with Intel Xeon, Quad Core, 2.26 Ghz, 16GB RAM, 4GB Graphics Card, 500 GB HDD, OS or better specs, as recommended by VMS Software. The server shall be suitable for any open platform software, inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make: HP, Dell, IBM.

Supply Installation Testing & Commissioning of 55" Professional LFD Display, Full HD, HDMI Port, VGA Port, Component Video Inputs, 1 Digital Audio Out inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make: Sony/Panasonic/Samsung

Supply Installation Testing & Commissioning of 3 Core Power Cable 1.5 sqmm. inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make: Finolex/Polycab/Havells

Supply Installation Testing & Commissioning of 4-pair, Cat6 UTP Cable, roll of 305m inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make & Model: Dlink/AMP/Panduit

Supply and erection of PVC pipe25mm dia ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make: BEC, AKG, Ravindera, Diplast

Supply and erection of PVC Industrial Channel 100mm X 50mm dia Make MK

Supply installation ,testing and commissioning of 2 KVA UPS On Line With 2 hour Backup MAKE APC/ MICROTEK /LUMONUS