Faridabad Smart City Limited Tender

Landscape Loudspeaker , Supply Installation testing and commissioning of Full range environmental rated (IP35 or better) In Ground or Above ground Landscape PA and Music loudspeaker with one downward firing 4.5inch (114 mm) advance composite environmental full-range driver. Domed port grille for clear, consistent sound quality, The Speaker shall have a rated impedance of 4 ohm and shall have a line voltage matching (step down) transformer with taps at 80 watts or better. The nominal dispersion of the loudspeaker shall be 360� horizontal and 50� vertical at least. Make-Bose/D&B Audiotechnik/Meyer Sound/EAW

Indoor and outdoor surface mounted loudspeaker , Supply, installation, testing and commissioning of 2 way IP55 rated (as per IEC 529) indoor or outdoor surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria Usable Frequency range (minus 10dB) of 59Hz to 20kHz Power handling of 400Watt peak Nominal dispersion of 120(H) � 120(V) Sensitivity of 88 dB SPL and Max SPL of 114 dB SPL peak Nominal impedance of 8 Ohms with an Integral multi tap Transformer with selectable tap settings of 5/10/20/40/80W at 100V or better. The loudspeaker system shall be comprised of a powder coated aluminum grill 6.5 inch weather treated woofer and 1.25 inch neodymium dome tweeter coaxially mounted enclosed in engineered plastics with an Inbuilt waveguide designed to provide uniform area coverage across the loudspeakers frequency range. UL 1480A rated and shall be packed in pairs. Make Bose/D and B Audiotechnik/Meyer Sound/EAW

Digital Power amplifier , Supply, installation, testing and Comissioning of 8 channel class D Power amplifier with a Max Output Power of 8x500W at 4 ohms, or bridged mode output power of 4 x 1000W at 8 ohms/70/100V. 20Hz to 20 KHz, SNR of 101dB and THD N of less that 0.4 percent with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc with Ethernet Port for Network Control, programming and monitoring. Analog input sensitivity for rated output 0, +4, +12 and +24 dBu, user selectable The amplifier front panel shall contain a user interface with a 240 x 64 LCD primary display, with LED indicators for signal present,input clipping, output limiting and fault. Functions accessible from the front panel interface shall include output configuration, fault logging, mute, input sensitivity selection, output attenuation, EQ on or off per channel and loudspeaker processing preset recall .The Damping factor shall be greater than 1000. The amplifier shall implement Dual Voltage and Current feedback technology to provide power as per the load demand. Shall offer optional Network audio connectivity (Dante ) through expansion slot. Make Bose/Lab gruppen/Powersoft