Faridabad Metropolitan Development Authority Tender

Re-storation of damaged sewerage connection of various consumers during construction of road including material, complete in all respect as per satisfaction in Engineer incharge

Credit for stone aggregate available from milling as per Sr. No. 1 (HSR Item 17.43.2)

Scrap value of existing kerb to be dismantled including dismantling, loading, all labour & machinery charges complete in all respect as per satisfaction of Engineer in charge. (To be credited)

Scrap of existing MS railing/grill to be dismantled including dismantling, loading, all labour & machinery charges complete in all respect as per satisfaction of Engineer in charge. (To be credited)

Scrap of existing interlocking tile to be dismantled including dismantling, loading, all labour & machinery charges complete in all respect as per satisfaction of Engineer in charge. (To be credited) L.S.

Providing and painting with cloured paint on the surface of cycle track using minimum 2 Nos. coats of cement concrete paint on floors in approved color which withstands all extremes, abrasion resistant having coverage min. 7-8 sqm/ltr in 1st coat, 5-6 sqm/ltr in second coat and so on, sheen level 28-32 at 60 degree, minimum specific gravity of 1.12 etc. make Asian, Burger, Nerolac, Dulux complete in all respect as per direction of Engineer-in-Charge.

BUS Q-SHELTER (N.S. Item)

(i)Providing and laying of Jamuna sand complete in the satisfaction of engineer in charge at various sites of shelters in city.

(ii)Providing and fixing medium grade MS junction boxes in cast in situ foundation beam of 150 x 150mm size.

(iii)Providing and pasting at site high grade printed vinyl with bus shelter name logo, route number etc. on one sides of the front facia information board. The vinyl shall be minimum 85 micron thick, of LG or equivalent make complete in all respect and to the entire satisfaction of engineer-in-charge.

(iv)Supplying and fixing single sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 3.80 to 4.00kg/m with minimum tensile strength 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate in front and 3mm ACP sheet reinforced with internal support frame at rear completely sealed with the of silicon and EPDM to make it dust and water proof should have the inbuilt strong clipping and frame arrangement for holding the flex or digital media alongwith all necessary cleats and corner joinery required to build thus signage with sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft. The aluminum frame should have polyester powder coating with minimum thickness of 60 micron. Signage should have inbuilt arrangement of mounting it with the bus shelter structure. The enclosure should provide weather proof protection required for the signage to operate outdoors, having inbuilt ventilation systems

(v)Supplying and fixing of double sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 5.3 to 5.5kg/m with minimum tensile strength 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate on both side and reinforced with internal support frame, completely sealed with the help of silicon and EPDM to make it dust and water proof. Should have the inbuilt STRONG clipping and frame arrangement for holding the flex of digital media alongwith all necessary cleats and corner joinery require to build the signage with sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft. The aluminum frame should have polyester powder coating with minimum thickness of 60 micron, signage should have inbuilt arrangement of mounting it with the bus shelter structure. The enclosure should provide weather proof protection required for the signage to operate outdoors, having inbuilt ventilation systems. (measurements for double sided signage to be taken for both sides during billing)

(vi)Vandal resistant light source of polycarbonate body with compact fluorescent lamp of white colour of 55w of standard, MY 1: of approved make with IP 67 approval, including cable fixing, switchgear etc. all complete.

(vii)Providing and fixing MS Electrical weather proof leader box approximately 600mm wide and 900mm high as required for installing MCB switch gear and meters as required for advertisement and other electrical gear, with provision for inserting cable condails as per design. The access to feeder box shall be through a toll based (common for all locks provided in each package) key, Tools should not be identical for different package shelters.

(viii)Providing and fixing Antiskid, Pre-polished cement concrete designer tiles 22 to 25mm thick for bus shelter tactile tiles to also be laid at provision for physically challenged as approved by the Engineer-in- charge. These should be cleanable acid resistant and fixed without grove and grout and should look like joint less as per manufacturer instructions laid over bed of 25mm thick cement mortar 1:3 (1 cement : 3 coarse sand) complete as directed by Engineer- in-charge

(ix)Providing and fixing channel frame to fix led light with 22W LED tube light (Halonix, PHILIP, OSRAM, HAVELS OR EQUIVALENT) fittings with electronic choke starters and wiring all complete connection to electrical supply drom feeder box with minimum 4 tubelights x per square meter (of add panel size) or actual requirement decided by the engineer in charge. The tube light frame and fittings (including that in feeder pillar) should include ballast ELCB timer MCB mounting blocks etc. The tube light alignment should allow two way lighting (front and back) of add panel at various sites of shelters in city

(x)Providing and fixing various member of material shall be austenitic steel of the grade 1.4301 (widely known as 304) it shall contain 17-18% chromium and 8-11% nickel as per specification) complete in all respect and to the entire satisfaction of the Engineer in charge.

(xi)Providing and fixing heavy duty SS prefabricated dust bins with canopy and two point support grouted in cement mortar and finished as per floor finish.

(xii)Providing and fixing 10mm thick Polycarbonate Multiwall sheet bronze colour multiwall sheet from GE/SABIC innovative plastics or Equivalent. Fixing of the 10mm sheet to be done with Allumnium profiles having EPDM / silicon and self tapping screws. Aluminum profiles need to use and front and rear of polycarbonate sheet has to be closed by aluminum profile at various sites of shelters in city.