Faridabad Metropolitan Development Authority Tender

Supply of 6 channel Compact Mixing System

2 core 2.5 sq mm speaker cable for Main speaker and Monitor speaker

2 core 4 sq mm speaker cable for subwoofer

Interconnection cables and connectors as required

Supply, Installation, Testing and Commissioning Supply of Corded Vocal Microphone with Dynamic neodymiun magnet based microphone element with frequency response of 32Hz-17kHz or better ,Cardioid polar pattern, sensitivity of = 2.3 mV/Pa ,Dynamic Range ) 140 dB, rated impedance of 350 ohm

Supplying, Installation, Testing and commissioning of USB audio interface / Internal Sound Card with studio-quality sound

SITC of Animation Laser : Source - Laser Diaode 20w RGB/RGBY, Scanner - 55kpps, Control modes - DMX512/SD card/ILDA, IP65 , The Laser should be integrated with a Laser Scanner control and Diado control soft ware to form different effects using any laser Show Designing software.

Vandal Resistant Enclosures for the Lasers and Moving Head Lights

`SITC of Weather Proof Moving Head : Beam Diameter @50m ( 0.9m , Lux Level @50m ( 75000 LUX, Angle: Narrow Beam Min.1° , Display On board control, Pan/Tilt rotation : 540°/270°(8-16bit) , Rotating Gobo : 8Gobos ,Gobo-flow effect, Gobo-shake,Bi-directional rotation , Colors : One color wheel(9 dichroic-filters plus white,Rainbow-flow effect) , Prism : 8 plus 16 facet prism , Focus: Motorized linear focus , RDM , DMX512 , IP65 , CE , BIS

Supply, Installation, Testing and Commissioning Equipment Rack 42 U Steel Doors – plain, vented at bottom, fully perforated and dual perforated, Glass Doors – with optional vented side trims for front-to-back air flow

Supplying, Installation, Testing and commissioning of Laser show programming and control software.

Media Player and Programming software should support video mapping, projection mapping, 3D mapping for multiple outputs

Supplying, Installation, Testing and commissioning of Media Management Software for controlling multiple servers

Signal Amplifier and Splitter : 8 Channel , Supports RDM and DMX 512, IP20, Tray Mounting Available.

SITC of CAT6 To DMX Converter Or Artnet : 2 Universe , Supports RDM and DMX 512, IP20, Tray Mounting Available.

SITC of stand alone DMX 4 x 512 controller of different DMX system from RGB/RGBW to more advanced moving and color mixing luminaries. The dual channel DMX 512 controller including RTC/calendar, Ethernet facilities, dry contact port triggering, multi-zone programming and SD memory card. The lighting levels, colors and effects can be programmed from a PC using the DMX software including following additional accessories etc. as required.

SITC of Workstation with intel i7 RtxA2000 processor or higher with Intel Mainboard/Intel chipset motherboard. SSD Hard drive 01 TB. Nvidia graphic card. 32 GB RAM Tower cabinet with 750 PSU. Windows Win10 ltsc 2021 Professional 64 bit or higher.

Supply, Installation, Testing and Commissioning of multi-Output Server with following specifications: - I7-13700kf. Intel Chipset Original Motherboard, 32Gb DDR5 RAM, Intel 1000 W smps, Samsung 980 pro 1 tb Quadro rtx a5000 Psu- 600 watt, 80plus platinum Windows 10 ltsc 2021 Case , Nvidia Quadro M-4000 8Gb DDR-5 or higher, 1 TB NvMe pro SSD, Window 10 Professional 64 Bit,or higher. USB Keyboard and Mouse. Complete as required.

24 inches Flat LCD Display Monitors with Optimal Resolution of 1920 x 1080 at 60 Hz having Brightness 250 cd/m² (typical).

Supply, installation testing and commissioning 60 KVA UPS, true on- line UPS 3 Ph double Conversion with all safeties and protection and suitable capacity sealed maintenance free 12 V batteries with a 30 mins backup time on full load with M open MS Battery rack and cable

Supply, installation testing and commissioning Small Business 24 port Gigabit switch and 2 x Mini GBIC fiber Uplinks.

Supply, laying and termination of HDMI / DP High speed patch cords with ethernet support with ends duly terminated.

Range Extender for HDMI/DP Signals (Transmitter and Receiver Set) over FO/CAT 6 Max. Data Rate — 4.95Gbps (1.65Gbps per graphic channel). Resolution — Up to WUXGA, Must Support EDID

Fibre optic cable with required accessories

Cat6 twisted unshielded pair cable.

Electrical panel, Power cabling and other electrical accessories with ISI Standard

Air conditioner Portable/Fixed AV Control Room (6m*4m) with minimum Two operator Seating Capacity

Supplying, installation, testing and commissioning of 6 mtr pole Hot dip galvanized pole with silver color coating with suitable bottom and top thick HT plate along with base plate and suitable arm bracket and with J type foundation bolts.

Enclosure for Subwoofer set

Pole Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.

Lightening Protection System

All Audio ,video,DMX Cables and Connectors

15 Min* 3 nos of Content Creation including, research, original music creation with 2D/3D animation, voice over in two languages (Hindiand English) using script as per approval of client.

Arching Jets:- a) SITC of Vertical jet nozzle with 50mm inlet and 15mm outlet in SS / Brass construction capable of a 15 degree plus / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height.- 2 Nos b) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H.-2 Nos c) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit.-6 Nos d) 2.5 sq mm 3 core double PVC sheathed copper cable- 200 Mtr e) 2.5 sq mm 2 core double PVC sheathed copper cable- 100 Mtr f) 1 sq mm 2 core double PVC sheathed shielded copper cable- 100 Mtr g) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress.- 1 Nos h) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism.- 2 Nos

Sunburst Jet:- a) SITC of Vertical jet nozzle with 25mm inlet and 10mm outlet in SS / Brass construction capable of a 15 degree plus / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height.- 1 No b) 2m long SS Header with 7 SS nipples each-1 No c) 25mm ball valves in SS / Brass- 7 Nos d) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H.-1 No e) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit.- 7 Nos f) 2.5 sq mm 3 core double PVC sheathed copper cable- 100 Mtr g) 2.5 sq mm 2 core double PVC sheathed copper cable-100 Mtr h) 1 sq mm 2 core double PVC sheathed shielded copper cable- 100 Mtr i) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress.- 1 No j) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism.- 1 No

Tall Jets:- a) SITC of Vertical jet nozzle with 80mm inlet and 25mm outlet in SS / Brass construction capable of a 15 degree plus / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height.- 2 nos b) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. 2 nos c) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. 6 nos d) 2.5 sq mm 3 core double PVC sheathed copper cable- 200 mtr e) 2.5 sq mm 2 core double PVC sheathed copper cable- 200 mtr f) 1 sq mm 2 core double PVC sheathed shielded copper cable-200 mtr g) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress.- 2 nos h) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism.- 2nos

Center Jet:- a) SITC of Vertical jet nozzle with 65mm inlet and 20mm outlet in SS / Brass construction capable of a 15 degree plus / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height. 1 nos b) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H.- 1 nos c) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. 3 nos d) 2.5 sq mm 3 core double PVC sheathed copper cable- 100 mtr e) 2.5 sq mm 2 core double PVC sheathed copper cable- 100 mtr f) 1 sq mm 2 core double PVC sheathed shielded copper cable- 100 mtr g) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress. 1 nos h) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism. 1 nos

Revolving Spiral Jets:- a) SITC of revolving spiral jet in SS / Brass construction capable of being adjusted for speed of rotation and with an integrated flow straightner for smooth flow of the water jet for the required jet height.- 4 nos b) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H.- 4 nos c) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit.- 12 nos d) 2.5 sq mm 3 core double PVC sheathed copper cable - 400 mtr e) 2.5 sq mm 2 core double PVC sheathed copper cable- 200 mtr f) 1 sq mm 2 core double PVC sheathed shielded copper cable- 200 mtr g) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress. - 2 nos h) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism.- 4 nos

Inward Crown Ring:- a) SITC of Vertical jet nozzle with 20mm inlet and 6mm outlet in SS / Brass construction capable of a 15 degree plus / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height. - 48 nos b) 2m long SS Header with 12 SS nipples each. - 4 nos c) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. - 4 nos d) SITC of DMX controlled 36W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. 12 nos e) 2.5 sq mm 3 core double PVC sheathed copper cable- 400 mtr f) 2.5 sq mm 2 core double PVC sheathed copper cable- 200 mtr g) 1 sq mm 2 core double PVC sheathed shielded copper cable - 200 mtr h) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress.- 2 nos i) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism. -4 nos

Outward Crown Ring:- a) SITC of Vertical jet nozzle with 20mm inlet and 6mm outlet in SS / Brass construction capable of a 15 degree plus / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height. - 96 nos b) 2m long SS Header with 12 SS nipples each. - 8 nos c) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. 8 nos d) SITC of DMX controlled 36W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit.- 24 nos e) 2.5 sq mm 3 core double PVC sheathed copper cable- 800 mtr f) 2.5 sq mm 2 core double PVC sheathed copper cable- 300 mtr g1 sq mm 2 core double PVC sheathed shielded copper cable- 300 mtr h) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress.- 3 nos i) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism. 8 nos

Fountain Assembling and Anchoring System (for floating fountain):- a) SITC of SS 304 Tie Frames custom designed to fix individual sets of floating frames to each other, complete with SS U clamps, SS fastners and all required accessories and consumables. 20 nos b) SITC of SS 304 Floating Cable trays 6m long with 4 uPVC floats with die moulded FRP endcaps of min 8mm thickness and separate raceway for low and high voltage cables.- 12 nos c) SITC of Polyester belts of minimum 3 Ton holding capacity with Snap Hook and Buckle Cam made of GI of length depending upon the depth of the waterbody. 30 nos d) SITC of concrete anchor blocks cast at site of 450mm x 450mm x 300mm with steel hookto be placed on the lake floor at various locations to hold the fountain in place. 30 nos

Panel Interconnecting Cables and PVC Double Wall Conduit:- a) SITC of 16mm four core cable for connecting the Panels- 30 mtr b) SITC of 35mm four core cable for connecting the Panels- 35 mtr c) SITC of DMX interconnecting cable- 50mtr d) SITC of PVC Double Walled Conduit for interconnecting the cable trenches.- 100 mtr

Comprehensive Warranty charges only (for 2nd year, 3rd year, 4th year and 5th year) Note :- (i) Warranty for 1st year-Part of DLP (ii) Operation And Maintenance-

Fountain Control System and Programming:- a) SITC of 2 universe DMX show controller with 8 digital inputs and outputs, 2x16 segment LCD display and show scheduling option. - 1 nos b) SITC of desktop computer for operating the show. 1 nos c) Programming of the show, fountain nozzles, lights, lasers, etc to the music and mapping of the projection on the water screen.- 2 nos.

Consumables, Packing, Shipping etc:- Supply of 6/8 Seater motor boat for maintenances purpose

Control Panels a) SITC of custom made indoor type Motor Control Panels with MCB`s, Contactors, Overload Relays, Single Phase Preventers, for automatic operation of pumps -66 Pumps b) SITC of custom made indoor type Motor Control Panels with MCB`s, Contactors, Overload Relays, Single Phase Preventers, for automatic operation of pumps - 8 Pumps c) SITC of custom made indoor type Light Control Panel with power supplies, DMX 512 transmitter cards, MCB`s catch for automatic operation of lights- 174 Lights d) SITC of custom made indoor type Control Panel with DXM cards, Electronic relays, Power Supplies and MCB`s for automatic switching of solenoid valves and pumps- 154 Pumps / SV`s e) SITC of custom made indoor type Control Panel with Stepper Drives, DMX Relays and DMX Stepper Drivers for the automatic operation of 2D Nozzles- 162 D`s f) SITC of custom made indoor type Control Panel with Stepper Drives DMX Relays and DMX Stepper Drivers for the automatic operation of 3D Nozzles- 83 D`s g) Custom made indoor type Panel with MCCB`s and main bus bar for supply to the above no of panels. 1 Panel

Video Projector (Floating Frame and Enclosure only) a) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fasteners custom designed to install the above Projector with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism. 4 nos b) SITC of weather proof projector enclosure to mount the Projector outdoors in a powder coated aluminium body with automatic temperature and humidity control at preset levels suitable for a 20,000 lumens projector with sliding installation tray for easy access of the projector for maintenance. Air intake and exits to be suitably sized and protected with filters to protect the projector from dust and insects, complete with IP55 control panel for 24hr monitoring of temperature and humidity with interconnecting cables for a distance of 100m. 4 nos.

Water Screen a) Water Screen Nozzle made of SS304 with adjustable film thickness suitable for a screen sixe of 10 x 30m - 2 nos b) SITC of high discharge and high head IP68 rated30 HP pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. 8 nos c) Specialized Fountain Cable- 10 sq mm 3 core double PVC sheathed copper cable 1600 mtr d) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fasteners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism. 2 nos

Chasing Jets a) SITC of Vertical jet nozzle with 25mm inlet and 10mm outlet in SS / Brass construction capable of a 15 degree plus / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height. 80 nos b) 3m long GI Header with 4 SS nipples each. 20 nos c) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. 20 nos d) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. 80 nos e) Fast acting Solenoid Valve in Brass / SS 25mm 80 nos f) Specalized Fountain Cable- 2.5 sq mm 3 core double PVC sheathed copper cable 2200 mtr g) Specalized Fountain Cable- 2.5 sq mm 2 core double PVC sheathed copper cable 1400 mtr h) Specalized Fountain Cable- 1 sq mm 2 core double PVC sheathed shielded copper cable 1400 mtr i) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress. 10 nos j) Specalized Fountain Cable- 1 sq mm 2 core double PVC sheathed shielded copper cable 8000 mtr k) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fasteners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism.20nos

3D Robotic Jets a) SITC of twin axis robotic nozzle with 40mm inlet and 12mm outlet capable of smooth rotation complete with SS304 bends, gear box, water proof stepper motor, sensor and operating electronics designed for operating at 90 degree. Including necessary pipes, fittings, and accessories required to connect it to the pumps in the water below. 8 nos b) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. 8 nos c) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. 8 nos d) Specialized Fountain Cable- 1.5 sq mm 3 core double PVC sheathed copper cable- 700mtr e) Specialized Fountain Cable- 2.5 sq mm 2 core double PVC sheathed copper cable 270 mtr f) Specialized Fountain Cable- 1 sq mm 2 core double PVC sheathed shielded copper cable 270 mtr g) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress. 1 nos h) Specialized Fountain Cable- 1.5 sq mm 4 core double PVC sheathed copper cable 1500 mtr i) Specialized Fountain Cable- 1 sq mm 3 core double PVC sheathed shielded copper cable 1500 mtr j) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fasteners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism. 8 nos

2D Robotic Jets a) SITC of single axis robotic nozzle with 40mm inlet and 12mm outlet capable of smooth rotation complete with SS304 bends, gear box, water proof stepper motor, sensor and operating electronics designed for operating at 90 degree. Including necessary pipes, fittings, and accessories required to connect it to the pumps in the water below.= 16 Nos b) SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H. - 16 Nos c) SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main circuit. 16 nos d) Specialized Fountain Cable-1.5 sq mm 3 core double PVC sheathed copper cable- 1750 mtr e) Specialized Fountain Cable-2.5 sq mm 2 core double PVC sheathed copper cable- 300 mtr f) Specialized Fountain Cable-1 sq mm 2 core double PVC sheathed shielded copper cable -300 mtr g) SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress.- 2 nos h) Specialized Fountain Cable-1.5 sq mm 4 core double PVC sheathed copper cable- 1750 Mtr. i) Specialized Fountain Cable-1 sq mm 3 core double PVC sheathed shielded copper cable - 1750 mtr j) SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fasteners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism.- 16 Nos

AMPLIFIER:- High performance 4 channel class H power amplifier in 2U frame, 4x1000W @8 ohm, 4x1500W @4 ohm, useable as 4/3/2 ch amplifier, heavy duty Torodial PSU, comprehensive protection circuitary

AMPLIFIER:- High performance 2 channel class D power amplifier in 2U frame, 2x2000W @8 ohm, 2x3500W @4 ohm, heavy duty Torodial PSU, comprehensive protection circuitary

DSP:- 8 input 8 output DSP Matrix processor, High performance 400MHz floating point DSP processor, 48KHz 24bit ADC and DAC, VAL DSP control software

3-Chip DLP Laser Phosphor projector Min. 47,000 ISO Lumen or higher brightness, WUXGA (1920 x 1200) display resolution or better, Aspect ratio 16 X 10, Contrast ratio (Dynamic) min. 18000:1 or higher, 24/7 operation, Input redundancy mode with auto Source switching, IP60 Rated sealed optics complete dust protection and filter less operation with liquid cooled technology and filter less operation with liquid cooled technology and min. 0.06mm Conformal Coating on all critical PCBs for protection against environment and corrosion. Inputs :2 x Display port, 2 x HDMI, 1 x HDBaseT,1x 3G-SDI in/out Controls: 3D sync in/out, Crestron RoomView Connected, PJLink, LAN, RS-232, AMX, DMX Art-Net along with suitable lens.

500 KVA DG Set

Consumables, Packing, Shipping etc:- Consumables such as electrical tape, cable joint waterproofing rubber and packaging of equipment for road transport.